Geekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS
Asin: B0CGQXNW35
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Dy-180Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
This Dy-180Ttl Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Note: Without Pps Output, Only Pps Indicator.
Features
- This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 Inches
See On Amazon Similar To Geekstory DY180TTL GPS Receiver Module
#1
GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
Asin: B084MK8BS2 | Ean: 0608603912524 | UPC: 608603912524
Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Send Ipx Interface Active Antenna;.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Contact Us Directly For Assistance.We Will Reply Your Problem In 24 Hours.We Try Our Best To Provide The Most Professional Service For Each Customer..
Gt-U7 Main Module Gps Module Using The Original Ublox 7Th Generation Chip, Software Is Compatible With Neo-6M. Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage;.
Features
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV
See On Amazon #2
Readytosky M8N GPS Module Built-in Compass with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 APM 2.6 2.8 Flight Controller
Asin: B01KK9A8QG | Model: XGT60-BLACK | PartNumber: XGT60-BLACK | Ean: 0757450335106 | UPC: 757450335106
★A New Generation M8n Gps,With Low Power Consumption And High Precision..
★★★ Attention: The Gps Can Only Use In Pixhawk And Apm Flight Controller,It Can't Work With Other Flight Controller..
★The Gps Light Only Can Light Up When It Search The Satellite Signal Outdoor; Rom Already Been Fix,It Cannot Be Flash And Change..
★The Ultimate Accuracy Is 0.6 Meters, Actually Almost 0.9 Meters, Greater Than The Previous Generation Neo-7N 1.4-1.6 Meters Accuracy..
Features
- Special designed for Pixhawk 2.4.6 2.4.8 flight controller,ASIN:B07CHQ7SZ4.(Note:If you use it to APM Flight Controller, Please replace the connect by yourself.)
- The ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy.
- A new generation M8N GPS,with low power consumption and high precision.
- The GPS light only can light up when it search the satellite signal outdoor; ROM already been fix,it cannot be flash and change.
- Attention: the GPS can only use in Pixhawk and APM Flight controller,it can't work with other flight controller.
- See more on Amazon...
Brand: Readytosky | Manufacturer: Readytosky
Dimensions: 0.79 x 8.27 x 5.91 Inches | Weight: 0.12 pounds
See On Amazon #3
Geekstory 2 PCS GT-U7 GPS Module GPS Receiver Navigation Satellite Positioning NEO-6M with 6M 51 Microcontroller STM32 R3+IPEX Active GPS Antenna High Sensitivity for Arduino Drone Raspberry Pi Flight
Asin: B0B5WCV38H
Gt-U7 Gps Module With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect. Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Ipx Interface Active Antenna Included In The Package!.
If You Have Any Questions About Using Our Products, Such As Needing Technical Documentation For A Product Please Feel Free To Contact Us (Please Click On "Geekstory" You Can Find "Sold By Geekstory" Under The Buy Now Button, Click On "Ask A Question" In The New Page To Send Us An Email.) We Will Try Our Best To Help You Out.
Operating Voltage: 3.6V-5V (Or Direct Usb Power Supply), Operating Baud Rate: 9600 (Can Be Modified). Application: Vehicle-Mounted, Handheld Devices Such As Pdas, Vehicle Monitoring, Mobile Phones, Camcorders And Other Mobile Positioning Systems.
Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage. Such As Narrow Urban Sky, Dense Jungle Environment, Gt-U7 Can Be High-Precision Positioning.
Features
- GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning
- GT-U7 GPS Module with a USB interface, you can directly use the phone data cable on the computer point of view positioning effect. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, IPX interface active antenna included in the package!
- Operating voltage: 3.6V-5V (or direct usb power supply), Operating baud rate: 9600 (can be modified). Application: Vehicle-mounted, Handheld devices such as PDAs, Vehicle monitoring, Mobile phones, camcorders and other mobile positioning systems
- If you have any questions about using our products, such as needing technical documentation for a product please feel free to contact us (please click on Geekstory you can find Sold by Geekstory under the Buy Now button, click on Ask a question in the new page to send us an email.) We will try our best to help you out
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six months
See On Amazon #4
Deegoo-FPV GPS Compass Module+ NEO-M8N+ GPS BDS Module Precision APM Drone Control, GPS Receiver FPV Flight Control Pixhawk Navigation Module for APM PIX PX4, Compatible with APM Port I2C MWC
Asin: B08NY9JSZ3 | Ean: 0789615751506 | UPC: 789615751506
Positioning; Auto-Positioning: 2.5M [In Average]; Auxiliary Positioning: 2M [Average], With Sbas Assistance; Drift: <0.02M / S; Timing Accuracy: 60Ns; Reference Coordinate System: Wgs-84; Maximum Altitude: 50000 Meters [Please Pay Attention To Atmospheric; Temperature During High-Altitude Flight, And Please Open The Flight Mode]; Maximum Speed: 500M / S; Acceleration: <4G..
Three In One Function: Support Gps Bds Dual-Mode Positioning, Plus Compass Chip! Let You Realize The Desire Of One Module Can Be Used In Many Ways!.
Main Chip: U-B-Lox M8030 Kt， Built-In Tcxo, Which Maintain Good Consistency In The Temperature Of -40 ℃ ~ +85 ℃; Tracking Channels: 72 Three In One Function: Support Gps Bds Dual-Mode Positioning, Plus Compass Chip! Let You Realize The Desire Of One Module Can Be Used In Many Ways!.
Features
- Wide range of use: for APM flight control, PIX flight control, PX4 flight control; The outlet terminal is directly compatible with the APM serial port and I2C port. Plug and play other flight controllers are also available, such as MWC flight controller.
- Main chip: U-B-LOX M8030 KT Built-in TCXO, which maintain good consistency in the temperature of -40 ~ +85 ; Tracking channels: 72 Three in one Function: Support GPS BDS dual-mode positioning, plus compass chip! Let you realize the desire of one module can be used in many ways!
- Positioning; Auto-positioning: 2.5m [in average]; Auxiliary positioning: 2m [average], with SBAS assistance; Drift: <0.02m / s; Timing accuracy: 60ns; Reference coordinate system: WGS-84; Maximum altitude: 50000 meters [Please pay attention to atmospheric; Temperature during high-altitude flight, and please open the flight mode]; Maximum speed: 500m / s; Acceleration: <4g.
- Three in one Function: Support GPS BDS dual-mode positioning, plus compass chip! Let you realize the desire of one module can be used in many ways!
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV
See On Amazon #5
Geekstory VK-162 G-Mouse USB GPS Dongle M8030 Chip 72 Channel Navigation Module External GPS Antenna Remote Mount USB GPS Receiver with Flash for Raspberry Pi Support Google Earth Window Linux
Asin: B0B1ZW9XJK | Model: FZ3677 | PartNumber: FZ3677
It Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Click “Geekstory” To Em-Ail Us.
The Usb Gps Is A Great, Easy, And An Awesome Solution For Travelers.It Works Anywhere Around The World. After You Download The Maps For The Country Traveling, It Will Pin Point Exactly Where You Are Without Having To Pay Any Service.
The Cable Length Is 200Cm. Support Gps + Glonass(Default), Gps + Beidou, Glonass + Beidou. Vk-162 Usb Gps Has Flash To Save Setting. Your Settings Will Be Saved The Next Time You Use It, Which Will Make It Easier To Use.
Features
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work
- The cable length is 200cm. Support GPS + GLONASS(default), GPS + beidou, GLONASS + beidou. VK-162 usb gps has flash to save setting. Your settings will be saved the next time you use it, which will make it easier to use
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service
- If you have any issue when using our product,or you need product use documentation, please click Geekstory to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.93 x 1.50 x 0.63 inches
See On Amazon #6
Geekstory 2PCS VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux
Asin: B0B6P2TGMN
You Can Get 2 X Vk-162 Gps Receiver. The Cable Length Is 190Cm. The Usb Gps Is A Great, Easy, And An Awesome Solution For Travelers.It Works Anywhere Around The World. After You Download The Maps For The Country Traveling, It Will Pin Point Exactly Where You Are Without Having To Pay Any Service..
Document Link: Https://Tinyurl.Com/Usb-Gps-Module.
This Usb Gps Can Be Used For Mac Computer, But It Requires Very Professional Technical Skills..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
It Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Click “Geekstory”, Click “Ask A Question” To Em-Ail Us.
Features
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- If you have any issue when using our product,or you need product use documentation, please click Geekstory , click Ask a question to em-ail us
- You can get 2 x VK-162 GPS Receiver. The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- Document link: https://tinyurl.com/usb-gps-module
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.38 x 6.50 x 3.86 inches
See On Amazon #7
Geekstory BE-180 GPS Module Beidou GPS AntennaTTL Level 38400bps for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B0BV5TGFD4
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1*Be-180 Gps Module; 1*1.00Mm 4Pins Cable; 1* 20Cm 1.0Mm 4P Connector Male Cable.
This Be-180 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It.. Baud Rate : 4800Bps To 921600Bps, Default 38400Bps..
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This BE-180 GPS Module using the latest 10th generation chip When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This BE-180 GPS Module has Flash to save configuration, so you do not need to reset data next time when you use it.. Baud Rate : 4800bps to 921600bps, Default 38400bps.
- What you will get: 1*BE-180 GPS Module; 1*1.00mm 4pins Cable; 1* 20cm 1.0mm 4P Connector Male Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 Inches
Warranty: Six Months
See On Amazon #8
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash for Arduino Pixhawk IPEX Compatible, Better Than VK-162
Asin: B07ZR8R17Q
Built-In Tcxo Crystal And Farad Capacitors For Faster Hot Start.
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory”, Click “Ask A Question” To Em-Ail Us.
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
Features
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start
- The product documentation link cannot be displayed. If you need technical documentation, please click Geekstory , click Ask a question to em-ail us
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.89 x 1.10 x 0.33 Inches
See On Amazon #9
DIYmalls BE-180 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-180 GPS
Asin: B0BTM3QRDJ
-Be 180 Module Connection With Flight Control, Usb To Ttl And Develop Board: Gnd To Gnd, Tx To Rx, Rx To Tx, Vcc To 5V..
-The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
-Be-180 Gps Should Be Used Outdoor, And The Antenna Side Facing To The Sky..
-Baud Rate: 4800Bps To 921600Bps, Default 38400Bps( Remember It Is Not 9600Bps)..
Features
- -be180 GPS equiped with 10th chip to replace the bn180 gps, more accurate and receiving signal faster.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
- -be 180 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -be-180 gps should be used outdoor, and the antenna side facing to the sky.
- -The blue (TX) light flashes when power on, indicating there is data output.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #10
Geekstory DY-880 TTL GPS Receiver Module with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou for Arduino FPV Aircraft CC3D Flight Control, Replace BN-880 GPS
Asin: B0CGQZRSWJ
Dy-880Ttl Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Dy-880Ttl Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.
Features
- DY-880TTL is suitable for Open source flight controller, not for flight control with SCM
- DY-880TTL gps module is dual module compass, with and electronic compass IC HMC5883L
- DY-880TTL gps module has flash to save configuration. So you do not need to reset next time when you use it. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 Inches
See On Amazon #11
M8N GPS Module, GPS Receiver Antenna, Drone GPS Navigator Unit with Onboard Compass Compatible with M8 Engine PX4 Pixhawk TR APM Flight Controller
Asin: B0CHFK661W
【Incorporated Compass】Equipped With An Onboard Compass, The Flight Controller Gps Module, Featuring An M8 Engine And Supporting Multiple Satellite Systems, And High Accuracy Saves Your Time And Effort During Operation..
【Compact And Versatile】The Drone Gps System Module Features A Smaller Size And Light Weigh, Making It Easy And Convenient To Carry And Ideal For Various Applications, And Supports Both Active And Passive Antennas..
【Pre-Configured Performance】Enjoy The Ease Of Use With Pre-Configured Gps Modules. They Come Pre-Flashed With The Correct Settings And Have Undergone Testing And Boasts A 10Ghz Refresh Rate For Improved Performance..
【Wide Compatibility】The M8n Gps Unit Is Compatible With Apm, Pixhawk, Cc3d, Tr Flight Controllers, And The Super High Precision And Efficient Star Searching Make It An Excellent Choice For Open-Source Controllers..
Features
- Rapid Searching Experience high-speed searching with this GPS module. In open areas, the GPS receiver antenna can find up to 6 stars in just 10 seconds, although search times may vary based on location and weather conditions.
- Wide Compatibility The M8N GPS unit is compatible with APM, Pixhawk, CC3D, TR flight controllers, and the super high precision and efficient star searching make it an excellent choice for open-source controllers.
- Incorporated Compass Equipped with an onboard compass, the flight controller GPS module, featuring an M8 engine and supporting multiple satellite systems, and high accuracy saves your time and effort during operation.
- Pre-Configured Performance Enjoy the ease of use with pre-configured GPS modules. They come pre-flashed with the correct settings and have undergone testing and boasts a 10GHz refresh rate for improved performance.
- Compact and Versatile The drone GPS system module features a smaller size and light weigh, making it easy and convenient to carry and ideal for various applications, and supports both active and passive antennas.
- See more on Amazon...
Brand: NestNiche | Manufacturer: NestNiche
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.07 Pounds
See On Amazon #12
Geekstory DY-220 GPS Receiver Module Dual GPS Glonass Module Navigation TTL Level 9600bps with Active Antenna Build-in Flash for Arduino FPV Aircraft, Replace BN-220 GPS
Asin: B0CGQYTDVN
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
What You Will Get: 1 X Dy-220Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
Dy-220Ttl Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But It Has No Compass. If You Need Gps With Flash And Compass, Please Buy Other From Geekstory..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Note: Without Pps Output, Only Pps Indicator.
Features
- This DY-220TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- DY-220TTL gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy other from Geekstory.
- What you will get: 1 X DY-220TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 Inches
See On Amazon #13
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash + Waterproof Active GPS Antenna 3V-5V DC, Connectors SMA Male Plug
Asin: B08BBZ8JZ5
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
How To Email Us? Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
Gps Antenna Dc Voltage: 3V To 5V，Waterproof Rating: Ip65, Ip67.
Supports Gps+Glonass (Default); Gps+Beidou;Glonass+ Beidou Multiple Modes Built-In Lna Signal Amplifier.
Features
- Video link: https://youtu.be/30qJsynTceY
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- GPS Antenna DC Voltage: 3V to 5V Waterproof rating: IP65, IP67
- How to email us? Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Geekstory
See On Amazon #14
Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows, Linux, Arduino
Asin: B0B74ZRDQF
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L. BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #15
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver+G72 Glonass Beidou GNSS Receiver
Asin: B09MRTMLWD
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
G72 Device Defaults To Gps+Beidou, Gps+Glonass Needs To Send Instructions To Change..
G72 Gps Usb Use The Newer Chip(M8130-Kt Chip), Better Than Vk-172 Gps.This Usb Gps Works With Windows, Android, Raspberry Pi, Linux And Google Earth, Not For Ios System. You Need To Install Driver Before Use It On Window, But Plug And Play For Raspberry Pi And Linux..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1pcs VK-162 G-Mouse USB GPS Dongle Navigation Module + 1pcs G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Android, Raspberry pi, Linux and Google Earth, not for IOS system. You need to install driver before use it on window, but plug and play for raspberry pi and Linux.
- G72 device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
- See more on Amazon...
Brand: Geekstory
See On Amazon #16
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps with GPS Passive Antenna+CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire,Female to Female for Window
Asin: B0B76DLH3N
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software. The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #17
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Asin: B0B1877R4K
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
This Bn-180 Gps Module Can Show Your Speed. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..
Features
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #18
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver+Vk-172 Gmouse USB GPS Glonass
Asin: B09MRRGTV2
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
The Vk-172 Gps Is Not Plug And Play For Most Device. You Need To Install Driver Before Make It Work. Raspberry Pi And Linux No Need Driver..
Vk-172 Usb Gps Works With Windows, Linux, Raspberry Pi And Google Earth, Not For Ios Android. Vk-172 Automatically Adapt The Baud Rate. The Baud Rate Has Any Data Output..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1pcs VK-162 G-Mouse USB GPS Dongle Navigation Module + 1pcs VK-172 Gmouse USB GPS Glonass Dongle Module
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- VK-172 usb gps works with Windows, Linux, Raspberry PI and Google Earth, not for IOS Android. VK-172 automatically adapt the baud rate. The baud rate has any data output.
- The vk-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver.
- See more on Amazon...
Brand: Geekstory
See On Amazon #19
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows
Asin: B0B76GCZ1M
This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable. The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon
Looking For Something Else?
Search