RIEDHOFF Y-Axis Power Milling Machine, [450 LB Torque ]Power Feed Table Mill,110V, 0-200PRM Adjustable Rotate Speed for Bridgeport and Similar Knee Type Milling Machines
Asin: B0CGV77Y2P | Model: PHO_0YKHEZQF | PartNumber: PHO_0YKHEZQF | Ean: 0196336723710 | UPC: 196336723710
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Stable And Efficient】This Power Feed Adopts Gleason Spiral Bevel Gear With Advantages Of Stable Transmission Ratio,Low Transmission Noise,High Transmission Efficiency And High Bearing Capacity.And When Fast Transmission, If The Tool Collides With The Work Piece Or Reverses Instantaneously, The Special Safety Device Protects The Transmission Plastic Gear And Electronic Parts From Damage..
【Wide Application】This Power Feed Fits Some Milling Machines Like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, Etc.This Milling Table Power Feed Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End,But It Will Not Fit Mills With A Different Mounting Pattern Or Different Sized Leadscrews Like Powermatic And Some Other Odd Sized Machines, So Please Make Sure Yours Is The Typical Bridgeport Type As Mentioned Above..
【Portable And Easy To Install】This Power Feed For Milling Machine Is Compact And Portable.Weight: 5Kg/11Lbs, Size: 7*4.5*11.5 Inch. And Whether It Is For A Novice Or A Skilled Operator, It Is Very Easy To Install This Power Feed According To The Instruction And Online Video Or By Yourself..
【Automatic And Manual Control】You Can Set This Power Feed To Work At Automatic Constant Speed To Free Your Hands Or Work By Manually Adjusting The Speed Control Knob To Do More Precise Milling Work.And This Mulitfunctional Milling Machine Power Feed Can Work With Excellent Speed Control In The Entire Range According To Your Needs..
Features
- Type Y-Axis Y-Axis power feed is made of aluminuml;Power Parameter: 95Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.
- AUTOMATIC AND MANUAL CONTROL You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this mulitfunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
- STABLE AND EFFICIENT This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
- PORTABLE AND EASY TO INSTALL This power feed for milling machine is compact and portable.Weight: 5kg/11lbs, Size: 7*4.5*11.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.
- WIDE APPLICATION This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.
- See more on Amazon...
Brand: RIEDHOFF | Manufacturer: RIEDHOFF
Dimensions: 7.08 x 15.35 x 12.99 Inches
See On Amazon Similar To RIEDHOFF YAxis Power Milling Machine
#1
Takywep Z-Axis Power Feed for Power Milling Machines 450 LB Torque Adjustable Speed Table Milling Machine Power Feed 0-200RPM Benchtop Mill Power Feed 110V for Bridgeport and Similar Knee-Type Mills
Asin: B0CXHJ3KD7 | Model: 1 | PartNumber: 1 | Ean: 0198290280582 | UPC: 198290280582
【Dual Control Mode】- Enjoy The Convenience Of Automatic Constant Speed Operation Or Manually Adjust The Speed Control Knob For Precision Milling Work. The Dual Control Mode Provides A Wide Range Of Speed Control Options To Meet Various Needs..
【Wide Application】- Suitable For Vertical Knee Milling Machines With The Same Installation Mode And 5/8" End Diameter Shaft, Such As Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, And Webb. Not Compatible With Machines Having Different Mounting Patterns Or Wire Sizes, So Ensure Your Machine Matches The Typical Bridgeport Type Mentioned Above Before Purchasing..
【High Efficiency Design】- Featuring Gleason Spiral Bevel Gear For Stable Transmission Ratio, Low Noise, High Efficiency, And Strong Load-Bearing Capacity. Special Safety Devices Protect Transmission Plastic Gears And Electronic Components From Damage..
【Portable And Easy Installation】- This Compact And Lightweight Milling Machine Power Feed Weighs Only 3.75 Kg/8.27 Lbs, Making It Easy To Transport And Install. Clear Instructions Allow Even Novices To Install And Operate It With Ease..
Features
- Z-Axis Power Feed - Constructed from aluminum, this Z-axis power feed features power parameters including 90 watts, 110V input voltage, 50/60Hz, single phase, with a variable rotation speed of 0-200 RPM. It offers a maximum torque of 450in-lb, maximum feed speed of 650mm/min, and maximum return speed of 850mm/min. Compatible with milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, and Webb.
- Portable and Easy Installation - This compact and lightweight milling machine power feed weighs only 3.75 kg/8.27 lbs, making it easy to transport and install. Clear instructions allow even novices to install and operate it with ease.
- Dual Control Mode - Enjoy the convenience of automatic constant speed operation or manually adjust the speed control knob for precision milling work. The dual control mode provides a wide range of speed control options to meet various needs.
- High Efficiency Design - Featuring Gleason spiral bevel gear for stable transmission ratio, low noise, high efficiency, and strong load-bearing capacity. Special safety devices protect transmission plastic gears and electronic components from damage.
- Wide Application - Suitable for vertical knee milling machines with the same installation mode and 5/8 end diameter shaft, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, and Webb. Not compatible with machines having different mounting patterns or wire sizes, so ensure your machine matches the typical Bridgeport type mentioned above before purchasing.
- See more on Amazon...
Brand: Takywep | Manufacturer: Takywep
See On Amazon #2
RIEDHOFF Y-Axis Power Feed, [450 LB Torque ] Power Feed Table Mill,110V, 0-200PRM Adjustable Rotate Speed Power Feed Milling Machine for Bridgeport and Similar Knee Type Milling Machines
Asin: B0CKX1HNR7 | Model: PFE-Y-12 | PartNumber: PFE-Y-12 | Ean: 0196336789921 | UPC: 196336789921
【Stable And Efficient】Equipped With The Gleason Spiral Bevel Gear, This Power Feed Ensures Stable Transmission Ratio, Minimal Transmission Noise, High Efficiency, And Superior Bearing Capacity. Additionally, It Features A Special Safety Device That Protects The Transmission Plastic Gear And Electronic Parts From Damage In Case Of Tool Collision Or Instantaneous Reversal During Fast Transmission..
【Wide Application】Designed To Fit Milling Machines Such As Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, And More, This Power Feed Is Versatile. It Specifically Fits Vertical Knee-Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End. However, Please Note That It Will Not Fit Mills With A Different Mounting Pattern Or Different Sized Leadscrews, Such As Powermatic And Some Other Irregularly Sized Machines. Therefore, Please Ensure That Your Machine Follows The Typical Bridgeport Type Mentioned Above..
【Portable And Easy To Install】Compact And Portable, This Milling Machine Power Feed Weighs Only 3.75Kg/8.27Lbs And Measures 73.512.8 Inches In Size. Whether You Are A Novice Or A Skilled Operator, Installing This Power Feed Is A Breeze. Just Follow The Instructions And Online Video Or Install It On Your Own..
【Automatic And Manual Control】You Have The Option To Operate This Power Feed In Automatic Mode At A Constant Speed, Allowing You To Work Hands-Free. Alternatively, You Can Manually Adjust The Speed Control Knob For More Precise Milling Work. This Versatile Power Feed Provides Excellent Speed Control Throughout The Entire Range To Meet Your Specific Needs..
Features
- Type Y-Axis Y-Axis power feed is made of aluminuml;Power Parameter:90Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
- AUTOMATIC AND MANUAL CONTROL You have the option to operate this power feed in automatic mode at a constant speed, allowing you to work hands-free. Alternatively, you can manually adjust the speed control knob for more precise milling work. This versatile power feed provides excellent speed control throughout the entire range to meet your specific needs.
- STABLE AND EFFICIENT Equipped with the Gleason Spiral Bevel Gear, this power feed ensures stable transmission ratio, minimal transmission noise, high efficiency, and superior bearing capacity. Additionally, it features a special safety device that protects the transmission plastic gear and electronic parts from damage in case of tool collision or instantaneous reversal during fast transmission.
- PORTABLE AND EASY TO INSTALL Compact and portable, this milling machine power feed weighs only 3.75kg/8.27lbs and measures 73.512.8 inches in size. Whether you are a novice or a skilled operator, installing this power feed is a breeze. Just follow the instructions and online video or install it on your own.
- WIDE APPLICATION Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and more, this power feed is versatile. It specifically fits vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. However, please note that it will not fit mills with a different mounting pattern or different sized leadscrews, such as Powermatic and some other irregularly sized machines. Therefore, please ensure that your machine follows the typical Bridgeport type mentioned above.
- See more on Amazon...
Brand: RIEDHOFF | Manufacturer: RIEDHOFF
Dimensions: 6.89 x 15.35 x 13.00 inches
See On Amazon #3
Takywep Y-Axis Power Milling Machine 450 LB Torque Adjustable Speed Table Milling Machine Power Feed 0-200RPM Benchtop Mill Power Feed 110V for Bridgeport and Similar Knee Type Milling Machines
Asin: B0CXHLF9MG | Model: 1 | PartNumber: 1 | Ean: 0198290280575 | UPC: 198290280575
【Stable And Efficient】- Equipped With Gleason Spiral Bevel Gear, The Power Feed Ensures A Stable Transmission Ratio, Low Noise, High Efficiency, And Strong Bearing Capacity. A Special Safety Device Protects Transmission Plastic Gears And Electronic Components From Damage During High-Speed Operations..
【Wide Application】Designed To Fit Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft End. Not Suitable For Machines With Different Mounting Patterns Or Lead Screw Sizes, So Verify Your Machine's Compatibility Before Purchasing..
【Portable And Easy Installation】- Compact And Portable, This Milling Machine Power Feed Weighs 5Kg/11Lbs And Measures 74.511.5 Inches, Making It Easy To Install. Suitable For Novice Or Skilled Operators, Installation Can Be Done Following The Instructions Or Online Video With Ease..
【Automatic And Manual Control】- This Multifunctional Power Feed Can Be Set To Operate At Automatic Constant Speed Or Manually Adjusted Using The Speed Control Knob For Precise Milling Work. Enjoy Excellent Speed Control Throughout The Range To Meet Your Specific Needs..
Features
- Y-Axis Power Feed - Constructed from aluminum, the Y-Axis power feed features power parameters including 95 watts, 110V input voltage, 50/60Hz, single phase, with a variable rotation speed of 0-200 RPM. It offers a maximum torque of 450in-lb, maximum feed rate of 650mm/min, and maximum return speed of 850mm/min.
- Automatic and Manual Control - This multifunctional power feed can be set to operate at automatic constant speed or manually adjusted using the speed control knob for precise milling work. Enjoy excellent speed control throughout the range to meet your specific needs.
- Stable and Efficient - Equipped with Gleason Spiral Bevel Gear, the power feed ensures a stable transmission ratio, low noise, high efficiency, and strong bearing capacity. A special safety device protects transmission plastic gears and electronic components from damage during high-speed operations.
- Portable and Easy Installation - Compact and portable, this milling machine power feed weighs 5kg/11lbs and measures 74.511.5 inches, making it easy to install. Suitable for novice or skilled operators, installation can be done following the instructions or online video with ease.
- Wide Application Designed to fit vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft end. Not suitable for machines with different mounting patterns or lead screw sizes, so verify your machine's compatibility before purchasing.
- See more on Amazon...
Brand: Takywep | Manufacturer: Takywep
See On Amazon
Looking For Something Else?
Search