LS1 LS2 LS6 LS Intake Manifold for Chevy 4.8 5.3 5.7 6.0 LS Cathedral Port Heads Upper Intake Manifold Black 92MM
Asin: B0CHB7QQL4 | Model: CM-IM-1011-BK | PartNumber: CM-IM-1011-BK
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🥇【Fitment Type】Intake Manifold Assembly Fit For Chevy Corvette 97-04, For Pontiac Firebird Formula, For Trans Am 98-02, For Corvette Z06 01-04, For Cadillac Cts V-Series 04-05, For Chevrolet Corvette 05-07,For Chevrolet Ssr 05-06, For Chevrolet Trailblazer Ss 06-09, For Cadillac Cts V-Series 06-07, For Pontiac Gto 05-06, For Saab 9-7X For Aero 08-09.
🥇【Time To Replace】If You Find That Your Vehicle Is Unresponsive To The Throttle Or Has A Rough Idle Speed, This May Be An Indication Of A Leak In The Intake Manifold. You Should Replace The Faulty Manifold As Soon As Possible To Prevent Further Damage To Your Car's Engine..
🥇【Ensure Fit】Make Sure This Manifold Modified Parts Fits Your Exact Vehicle, Input Your Make, Model And Trim Level Into The Amazon Garage.Package Includes: 102Mm Intake Manifold (With Rear Map Sensor Port), Gaskets, Hardware, Fuel Rails, Fuel Crossover Line. (Injector And Throttle Body Not Included).
🥇【Upper Intake Manifold】The Intake Manifold Is Responsible For Distributing Air To Each Cylinder Of The Car. It Is Attached To The Cylinder Head, And As Air Enters The System, The Intake Manifold Distributes It Evenly To Each Cylinder. The Intake Manifold Also Helps To Cool The Cylinder To Prevent The Engine From Overheating..
Features
- SMOOTHINNER WALL The smooth inner wall of the intake manifold can reduce the gas flow resistance and improve the intake capacity.
- UPPER INTAKE MANIFOLD The intake manifold is responsible for distributing air to each cylinder of the car. It is attached to the cylinder head, and as air enters the system, the intake manifold distributes it evenly to each cylinder. The intake manifold also helps to cool the cylinder to prevent the engine from overheating.
- FITMENT TYPE Intake manifold assembly fit for Chevy Corvette 97-04, for Pontiac Firebird Formula, for Trans AM 98-02, for Corvette Z06 01-04, for Cadillac CTS V-series 04-05, for Chevrolet Corvette 05-07,for Chevrolet SSR 05-06, for Chevrolet TrailBlazer SS 06-09, for Cadillac CTS V-Series 06-07, for Pontiac GTO 05-06, for Saab 9-7X for Aero 08-09
- ENSURE FIT make sure this manifold modified parts fits your exact vehicle, input your make, model and trim level into the Amazon Garage.Package Includes: 102mm Intake manifold (with rear map sensor port), gaskets, hardware, fuel rails, fuel crossover line. (Injector and throttle body not included)
- TIME TO REPLACE If you find that your vehicle is unresponsive to the throttle or has a rough idle speed, this may be an indication of a leak in the intake manifold. You should replace the faulty manifold as soon as possible to prevent further damage to your car's engine.
- See more on Amazon...
Brand: PUZZLEDEER | Manufacturer: PUZZLEDEER
Dimensions: 10.24 x 23.23 x 13.78 inches
Warranty: 6 months
See On Amazon Similar To LS1 LS2 LS6 LS Intake
#1
MooSun 4" Cold Air Intake System + Heat Shield For 99-06 GMC/Chevy V8 4.8L/5.3L/6.0L / Silverado 1500/2500/3500 (Black)
Asin: B07SGJ9JCF | Model: MS-06880 | PartNumber: MS-06880 | Ean: 0824006736479 | UPC: 824006736479
Fit For Gmc 1999-2006 Sierra 1500 & 2007 Sierra 1500 Classic & 2001 2002 2003 2005 2006 Sierra 1500 Hd & 1999-2004 Sierra 2500 & 2001-2006 Sierra 2500 Hd & 2000-2006 Fit For Yukon & 2002-2006 Fit For Yukon Xl 1500/2500.
Features
- Fit for 2002-2006 Avalanche 1500 & 1999-2006 Fit for Silverado 1500 & 01 02 03 05 06 Fit for Silverado 1500 HD & 1999-2006 Fit for Silverado 2500 & 2001-2006 Fit for Silverado 2500 HD/3500 & 2000-2006 Fit for Suburban 1500/2500/Tahoe & 2007 Fit for Silverado 1500 Classic/1500&2500 HD Classic(Please MATCH your vehicle on the left top)
- Fit for GMC 1999-2006 Sierra 1500 & 2007 Sierra 1500 Classic & 2001 2002 2003 2005 2006 Sierra 1500 HD & 1999-2004 Sierra 2500 & 2001-2006 Sierra 2500 HD & 2000-2006 Fit for Yukon & 2002-2006 Fit for Yukon XL 1500/2500
- See more on Amazon...
Brand: MOOSUN | Manufacturer: MOOSUN
Dimensions: 7.60 x 16.60 x 13.00 Inches | Weight: 7.92 Pounds
See On Amazon #2
MOOSUN 4 inch Cold Air Intake Black Tube + Heat Shield for 1999-2006 GMC/Chevy V8 4.8L/5.3L/6.0L Silverado 1500/2500/3500 Black
Asin: B082VH33Y4 | Model: MS-99-06-BB | PartNumber: MS-99-06-BB | Ean: 0303277078674 | UPC: 303277078674
Uniquethe Kit Includes A Intake Tube And Steel Heat Shield That Features A Durable Carbon-Black Powder Coating For Long Lasting Good Looks.
International Products Have Separate Terms, Are Sold From Abroad And May Differ From Local Products, Including Fit, Age Ratings, And Language Of Product, Labeling Or Instructions.
Features
- unique The kit includes a intake tube and steel heat shield that features a durable carbon-black powder coating for long lasting good looks
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
- UniqueThe kit includes a intake tube and steel heat shield that features a durable carbon-black powder coating for long lasting good looks
- See more on Amazon...
Brand: MOOSUN | Manufacturer: MOOSUN
Dimensions: 5.91 x 14.96 x 11.02 inches | Weight: 7.89 Pounds
See On Amazon #3
for LS Swap Motor Mounts Adapter Plates - Universal Swap Bracket Small Block LS Conversion Adjustable Fit for LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet Aluminum for SBC Vehicle to LS Engine
Asin: B08C2C1KQ3 | Model: LSI | PartNumber: LSI | Ean: 7427127150518
Package Includes: 2 X Adapter Plates, 8 X Flat Head Bolts, And 6 X Flange M10-1.5 Bolts (The Plates Are M10 Threaded, Use The Hardware Included).
Superior Material: Cnc Milled From Aluminum To Provide The Most Accurate Adapter Plates Available..
No Grinding Necessary For A Flush Fit: Our Swap Motor Mounts For Ls Have A Necessary Opening Milled Out Of The Center Of The Plate To Clear The Hump On The Backside Of Your Sbc/Bbc Motor Mounts..
Great Design: These Are Made With Oem Specifications For The Best Possible Fitment Into Your Vehicle. They Will Move The Crankshaft Centerline Up .17 Inches In The Vehicle..
Features
- FUNCTION: Our brackets allow a LS series engine to be bolted into a vehicle which originally has a small block chevy engine with your existing mounts.
- GREAT DESIGN: These are made with OEM specifications for the best possible fitment into your vehicle. They will move the crankshaft centerline up .17 inches in the vehicle.
- PACKAGE INCLUDES: 2 X Adapter Plates, 8 X Flat Head Bolts, and 6 X Flange M10-1.5 Bolts (The plates are M10 threaded, use the hardware included)
- No Grinding Necessary for A Flush Fit: Our Swap motor mounts for LS have a necessary opening milled out of the center of the plate to clear the hump on the backside of your SBC/BBC motor mounts.
- SUPERIOR MATERIAL: CNC milled from aluminum to provide the most accurate adapter plates available.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
See On Amazon #4
ICT Billet SBC Vehicle to LS Engine - Motor Mount Adapter Plate - Universal Swap Bracket Small Block LS Conversion Adjustable LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet 551628
Asin: B00JU7LQ8Y | Model: 551628 | PartNumber: 551628 | Ean: 0682384790090 | UPC: 682384790090
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, 3/8" Billet Aluminum.
Natural Aluminum Finish.
Includes: 2 Adapter Plates, 8 Flat Head Bolts, And 6 Flange M10-1.5 Bolts (Plates Are M10 Threaded, Use The Hardware Included).
These Plates Will Move The Crankshaft Centerline Up .17" In The Vehicle.
Features
- Made with OEM specifications for the best possible fitment into your vehicle
- These plates will move the crankshaft centerline up .17 in the vehicle
- Made in Wichita, Kansas from aerospace grade, USA produced, 3/8 billet aluminum
- Includes: 2 adapter plates, 8 flat head bolts, and 6 flange M10-1.5 bolts (plates are M10 threaded, use the hardware included)
- Natural aluminum finish
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 8.00 x 5.00 Inches
See On Amazon #5
4-Bolt Throttle Cable Bracket Replacement for LS LSX LS1 LS2 LS3 LS6 LS7 Intakes 92MM-102MM LS Throttle Cable Bracket
Asin: B0BWTJFJ12 | Model: TJ403 | PartNumber: TJ403
✅【Specification】: Throttle Opening:104Mm. Throttle Body Bolt Pattern:Oe 4-Bolt Pattern..
✅【What You Get】: Package Includes: 2 X Cable Brackets, 1 X Screw, 2 X Gaskets, 1 X Nut As Pictures Showed. If You Have Any Questions Or Issue, Please Feel Free To Contact Us, We Will Give You Satisfactory Solution..
✅【Important Note】: Please Double Check The Fitment, The Size And Picture Of Your Original One For Matching Before Purchase..
✅【Premium Quality & Sturdy】: This Throttle Cable Bracket Is Made Of Premium-Quality Steel Material, Wear-Resistant, Corrosion-Resistant, Not Easy To Age, Sturdy And Has A Longer Service Life. Meet Oe Standards.Support And Protect Drive-By-Cable Throttle Bodies Perfectly..
Features
- Fitment : This 4-Bolt Throttle Cable Bracket compatible with Intakes 92MM 102MM LS LSX LS1 LS2 LS3 LS6 LS7 4-BOLT LSX A-TEAM DRIVE-BY-CABLE THROTTLE BODIES 81012 81042.
- Premium Quality & Sturdy : This throttle cable bracket is made of premium-quality steel material, wear-resistant, corrosion-resistant, not easy to age, sturdy and has a longer service life. Meet OE standards.Support and protect drive-by-cable throttle bodies perfectly.
- Specification : Throttle Opening:104mm. Throttle Body Bolt Pattern:OE 4-bolt Pattern.
- Important Note : Please double check the fitment, the size and picture of your original one for matching before purchase.
- What You Get : Package includes: 2 x Cable Brackets, 1 x Screw, 2 x Gaskets, 1 x Nut as pictures showed. If you have any questions or issue, please feel free to contact us, we will give you satisfactory solution.
- See more on Amazon...
Brand: EATAKWARD | Manufacturer: EATAKWARD
Warranty: If you have any questions or issue, please feel free to contact us, we will give you satisfactory solution.
See On Amazon #6
Michigan Motorsports LS Multi Layer MLS Header Manifold Exhaust Gasket Like 12617944 LS1 LS2 LS3 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 6.2
Asin: B08D8PRTW7
Qty 2- Ls Multi Layer Exhaust Gasket.
Fits Gen Iii/Gen Iv 12617944 12600530.
Ls1 Ls2 Ls6 4.8 5.3 5.7 6.0.
These Exhaust Manifold Gaskets Will Provide A Leak-Free Seal When Installing Your Exhaust Manifolds. These Exhaust Manifold Gaskets Are Made Of High-Grade Materials To Reduce The Chance Of A Blowout Under High Exhaust Temperatures Or Pressure..
Features
- LS Multi Layer Exhaust Gasket Replacement for 12617944 12600530 LS1 LS2 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 A Pair of Gaskets
- These exhaust manifold gaskets will provide a leak-free seal when installing your exhaust manifolds. These exhaust manifold gaskets are made of high-grade materials to reduce the chance of a blowout under high exhaust temperatures or pressure.
- QTY 2- LS Multi Layer Exhaust Gasket
- LS1 LS2 LS6 4.8 5.3 5.7 6.0
- Fits Gen III/Gen IV 12617944 12600530
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Dimensions: 0.50 x 17.50 x 3.50 inches
See On Amazon #7
Intake Manifold Gasket Set - Compatible with 4.8L 5.3L 6.0L Chevy Silverado, Suburban, Tahoe, GMC Sierra, Yukon, Savana, Cadillac Escalade - Replace 89060413 MS98016T
Asin: B08F268Q49 | Model: IMG-GM-001 | PartNumber: IMG-GM-001
Replace Part Numbers - Replace Gm 89060413, Replace Fel-Pro Ms98016t Ms92211 Ms18007 Ms4657 Ms16340. Commonly Found On Chevy Silverado, Suburban, Tahoe, Trailblazer, Express, Colorado, Avalanche, Gmc Sierra, Yukon, Savana, Canyon, Envoy, Cadillac Escalade, Buick Rainier, Hummer H2, H3, H3t, Isuzu Ascender, Saab 9-7X With 4.8 5.3 6.0 V8 Vortec Engine..
What You'll Get - 1 Set Of Intake Manifold Gaskets Set & 12 Months Warranty. If You Have Any Problem With Our Intake Manifold Gasket, Feel Free To Contact Us, We Will Sort Things Out Together..
Oem Design & Direct Fit - Quality Materials & Advanced Technology Used, Meets Or Exceeds Oem Standards. Even Though This Is Not A Genuine Acdelco For Fel-Pro Intake Manifold Gasket, But It Works Even Better And Lasts Longer. Save Yourself Times And Money By Replacing Intake Manifold Gaskets Yourself..
Fit The Following Vehicles - Intake Manifold Gasket Set Compatible With 4.8L 5.3L 6.0L 6.2L Gm Vortec Engine, Including Chevy Silverado, Suburban, Tahoe, Trailblazer, Express, Colorado, Avalanche, Gmc Sierra, Yukon, Savana, Canyon, Envoy, Cadillac Escalade, Buick Rainier, Hummer H2, H3, H3t, Isuzu Ascender, Saab 9-7X, Model Year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014..
Features
- INTAKE MANIFOLD GASKET KIT - Responsible for sealing the intake manifold against the cylinder heads. If you have problems like engine missfire, coolant leaks, engine overheating, or decrease in power, acceleration, and fuel economy, you might need to replace your intake manifold gasket.
- FIT THE FOLLOWING VEHICLES - Intake Manifold Gasket Set compatible with 4.8L 5.3L 6.0L 6.2L GM Vortec engine, including Chevy Silverado, Suburban, Tahoe, Trailblazer, Express, Colorado, Avalanche, GMC Sierra, Yukon, Savana, Canyon, Envoy, Cadillac Escalade, Buick Rainier, Hummer H2, H3, H3T, Isuzu Ascender, Saab 9-7x, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
- REPLACE PART NUMBERS - Replace GM 89060413, replace Fel-Pro MS98016T Ms92211 Ms18007 Ms4657 Ms16340. Commonly found on Chevy Silverado, Suburban, Tahoe, Trailblazer, Express, Colorado, Avalanche, GMC Sierra, Yukon, Savana, Canyon, Envoy, Cadillac Escalade, Buick Rainier, Hummer H2, H3, H3T, Isuzu Ascender, Saab 9-7x with 4.8 5.3 6.0 V8 Vortec Engine.
- OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine ACDelco for Fel-Pro intake manifold gasket, but it works even better and lasts longer. Save yourself times and money by replacing intake manifold gaskets yourself.
- WHAT YOU'LL GET - 1 Set of Intake Manifold Gaskets Set & 12 Months Warranty. If you have any problem with our intake manifold gasket, feel free to contact us, we will sort things out together.
- See more on Amazon...
Brand: MNJWS | Manufacturer: MNJWS
See On Amazon #8
MSCRP LS Throttle Body Bypass Hose kit LS Coolant/Steam Port Crossover Hose Kits
Asin: B094NNWSZG | Model: YX02186 | PartNumber: YX02186 | Ean: 0757842752870 | UPC: 757842752870
Can Be Installed On The Front Or Rear Of The Cylinder Heads.
Not Compatible With Fast 102 Intake Manifolds.
Thread Sealant Not Included.
Includes: 2 Orings, 2 Bolts, 2 Coolant Ports, 1 Ptfe Tape，And 1 Steel Braided Hose ..
Features
- Compatible with all GM LS series engines
- Includes: 2 orings, 2 bolts, 2 coolant ports, 1 PTFE TAPE and 1 steel braided hose .
- Can be installed on the front or rear of the cylinder heads
- Thread sealant NOT included
- not compatible with FAST 102 intake manifolds
- See more on Amazon...
Brand: WnSEu | Manufacturer: MSCRP
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.29 Pounds
See On Amazon #9
CNRAQR LS Water Pump Spacers kit Adapter Swap Kit Compatible with Camaro LQ4 LS1 5.3l LSX LQ9 LS6 L33 LS2 Engine Series
Asin: B0B71H9VS9 | Model: CNRAQR | PartNumber: CNRAQR | Ean: 3369573412663
【Powerful Performance】Converting Your Truck Water Pump To An Ls1 Car Water Pump Allows For Easier Installation Of Low Profile Intake Manifolds And Possibly Simpler Radiator Hose Routing..
【Quality Service】We Provide A Two-Month Return Service，When You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You..
【Easy To Install】These Spacers Will Keep The Alignment Perfectly, Which Is Reliable To Use.Excellent Replacement For The Old And Damaged Water Pump Spacers.The Installation Is Simple And Does Not Require Complicated Operations..
【High Quality Material】Adopt Premium Aluminum Alloy Material, Antirust, Anticorrosion And Durable..
Features
- Strong Compatibility Compatible with 1998-2002 LS1 Camaro water pump to LS truck engine block, 1999-2019 Chevy small Block Gen III/IV (LS based engine) V8 6.0L, 1999-2017 Chevy small block Gen III/IV ( LS based engine) V8 4.8L, 1999-2014 Chevy small block Gen III/IV (LS based engine) V8 5.3L.
- High Quality Material Adopt premium aluminum alloy material, antirust, anticorrosion and durable.
- Powerful Performance Converting your truck water pump to an LS1 car water pump allows for easier installation of low profile intake manifolds and possibly simpler radiator hose routing.
- Easy To Install These spacers will keep the alignment perfectly, which is reliable to use.Excellent replacement for the old and damaged water pump spacers.The installation is simple and does not require complicated operations.
- Quality Service We provide a Two-month Return Service When You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.
- See more on Amazon...
Brand: CNRAQR | Manufacturer: CNRAQR
See On Amazon #10
Marsflex 4" Cold Air Intake Kit & Filter Heat Shield for Chevy for GMC 1999 2000 2001 2002 2003 2004 2005 2006 Silverado Sierra Tahoe Avalanche Suburban Yukon Sierra 1500 2500 V8 4.8L 5.3L 6.0L
Asin: B0CMTTMVD3 | Model: APEN23001-M1 | PartNumber: APEN23001-M1
🥇【Application-Gmc】Gvpart4u Air Intake System Fit For 1999-2006 Sierra 1500 4.8L/5.3L/6.0L V8 / 1999-2006 Sierra 1500 Hd 4.8L/5.3L/6.0L V8 / 2007 Sierra 1500 Classic 4.8L V8 / 1999-2006 Sierra 2500 5.3L/6.0L V8 / 1999-2006 Sierra 2500 Hd 5.3L/6.0L V8 / 2001-2006 Sierra 3500 6.0L V8 / 2002-2006 Sierra Denali 6.0L V8 / 2001-2006 Yukon Denali 6.0L V8 / 2001-2006 Yukon Denali Xl 6.0L V8 / 2002-2006 Yukon Denali Xl 1500 5.3L V8 / 2002-2006 Yukon Denali Xl 2500 6.0L V8 / 2000-2006 Yukon 4.8L/5.3L V8.
🥇【Washable And Reusable】 Every 5,000 Kilometers, It Is Recommended To Remove The Inner Filter Element. You Can Wash And Dry It With Water Mixed With Detergent, Or Blow Off The Dust Attached To The Filter Element From The Inside Of The Filter Element With An Air Gun..
🥇【Multi-Layer Fiber Filter And Heat Shield】 The Kit Includes A Steel Heat Shield That Features A Durable Carbon-Black Powder Coating For Long Lasting Good Looks.The Filter Medium Adopts High-Density Multi-Layer Fiber With Excellent Dust Accumulation Effect, And The Filter Screen Is Made Of Alloy Metal, Which Is Not Easy To Be Oxidized, Which Greatly Prolongs The Service Life Of The Product..
🥇【High Flow Intake Air】 Gvpart4u Cold Air Intake Systems Provide A Less Restrictive Path For Airflow, Increasing The Volume Of Air .Cold Air Intakes Are Designed To Flow More Efficiently Than Your Car's From-The-Factory. The Shape Of The Filter Is A Cone, And The Shell Is Made Of High-Strength Aluminum Alloy Designed Into A Funnel Shape. After Testing, This Structure Can Maximize The Air Intake And Form A Perfect Ratio With The Filterability Of The Product..
🥇【Stable Performance And Easy Installation】 The Intake Pipe Is Made Of Aluminum Alloy, Which Is More Resistant To High Temperature, Corrosion And Heat Dissipation Than The Original Rubber Pipe, Effectively Reduces The Air Intake Resistance, And Makes The Engine Burn More Fully. Gvpart4u Cold Air Intake Kit Is Designed According To The Location And Shape Of The Original Air Intake Kit, So It Is Very Convenient To Install And The Service Life Is Up To 200,000 Kilometers..
🥇【Boost Motivation】 The Performance Cold Air Intake Kit Design Aims To Increase 8-12% Horsepower And 6-12% Torque, And The Power That Bursts Out In An Instant Is Relatively Improved. A Larger Air Intake Means That The Engine Inhales More Oxygen In The Air At The Same Time, So That The Engine Can Burn More Fully. These Design Can Help Your Engine To Draw In More Cold Air Resulting In Better Throttle Response And Higher Explosive Horsepower Output，And Creating An Attractive Intake Noise..
🥇【Reliable Warranty】 One-Year Warranty. Leaphorse Is Always On Your Side, Any Problem You Meet, Email Me At Once, And We Will Reply And Solve Your Question As Soon As Possible. Have A Nice Day!.
🥇【Application-Chevy】Gvpart4u Cool Air Intake Fit For 2002-2006 Avalanche 1500 5.3L V8 / 2000-2006 Suburban 1500 5.3L/6.0L V8 / 2000-2006 Suburban 2500 5.3L/6.0L V8 / 2000-2006 Tahoe 4.8L/5.3L V8 / 1999-2006 Silverado 1500 4.8L/5.3L/6.0L V8 / 1999-2006 Silverado 1500 Hd 4.8L/5.3L/6.0L V8 / 1999-2006 Silverado 2500 5.3L/6.0L V8 / 1999-2006 Silverado 2500 Hd 5.3L/6.0L V8 / 2001-2006 Silverado 3500 6.0L V8 / 2003-2006 Silverado Ss 6.0L V8.
Features
- Application-Cadillac GVPART4U cold air intake kit fit for 2002-2006 Escalade 5.3L V8 / 2002-2006 Escalade 6.0L V8 / 2002-2006 Escalade EXT 6.0L V8 / 2003-2006 Escalade ESV 6.0L V8
- Application-Chevy GVPART4U cool air intake fit for 2002-2006 Avalanche 1500 5.3L V8 / 2000-2006 Suburban 1500 5.3L/6.0L V8 / 2000-2006 Suburban 2500 5.3L/6.0L V8 / 2000-2006 Tahoe 4.8L/5.3L V8 / 1999-2006 Silverado 1500 4.8L/5.3L/6.0L V8 / 1999-2006 Silverado 1500 HD 4.8L/5.3L/6.0L V8 / 1999-2006 Silverado 2500 5.3L/6.0L V8 / 1999-2006 Silverado 2500 HD 5.3L/6.0L V8 / 2001-2006 Silverado 3500 6.0L V8 / 2003-2006 Silverado SS 6.0L V8
- Application-GMC GVPART4U air intake system fit for 1999-2006 Sierra 1500 4.8L/5.3L/6.0L V8 / 1999-2006 Sierra 1500 HD 4.8L/5.3L/6.0L V8 / 2007 Sierra 1500 Classic 4.8L V8 / 1999-2006 Sierra 2500 5.3L/6.0L V8 / 1999-2006 Sierra 2500 HD 5.3L/6.0L V8 / 2001-2006 Sierra 3500 6.0L V8 / 2002-2006 Sierra Denali 6.0L V8 / 2001-2006 Yukon Denali 6.0L V8 / 2001-2006 Yukon Denali XL 6.0L V8 / 2002-2006 Yukon Denali XL 1500 5.3L V8 / 2002-2006 Yukon Denali XL 2500 6.0L V8 / 2000-2006 Yukon 4.8L/5.3L V8
- Boost Motivation The performance cold air intake kit design aims to increase 8-12% horsepower and 6-12% torque, and the power that bursts out in an instant is relatively improved. A larger air intake means that the engine inhales more oxygen in the air at the same time, so that the engine can burn more fully. These design can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output and creating an attractive intake noise.
- High Flow Intake Air GVPART4U cold air intake systems provide a less restrictive path for airflow, increasing the volume of air .Cold air intakes are designed to flow more efficiently than your car's from-the-factory. The shape of the filter is a cone, and the shell is made of high-strength aluminum alloy designed into a funnel shape. After testing, this structure can maximize the air intake and form a perfect ratio with the filterability of the product.
- Stable Performance And Easy Installation The intake pipe is made of aluminum alloy, which is more resistant to high temperature, corrosion and heat dissipation than the original rubber pipe, effectively reduces the air intake resistance, and makes the engine burn more fully. GVPART4U cold air intake kit is designed according to the location and shape of the original air intake kit, so it is very convenient to install and the service life is up to 200,000 kilometers.
- Washable And Reusable Every 5,000 kilometers, it is recommended to remove the inner filter element. You can wash and dry it with water mixed with detergent, or blow off the dust attached to the filter element from the inside of the filter element with an air gun.
- Multi-layer Fiber Filter And Heat Shield The kit includes a steel heat shield that features a durable carbon-black powder coating for long lasting good looks.The filter medium adopts high-density multi-layer fiber with excellent dust accumulation effect, and the filter screen is made of alloy metal, which is not easy to be oxidized, which greatly prolongs the service life of the product.
- Reliable Warranty One-year warranty. Leaphorse is always on your side, ANY PROBLEM YOU MEET, EMAIL ME AT ONCE, and we will reply and solve your question as soon as possible. Have a nice day!
- See more on Amazon...
Brand: Marsflex | Manufacturer: Marsmotor
Dimensions: 7.50 x 17.00 x 13.00 Inches | Weight: 9.36 Pounds
Warranty: One-year warranty
See On Amazon #11
MooSun 4" Performance Cold Air Intake Kit With Filter For GMC Chevy Chevrolet 1999 2000 2001 2002 2003 2004 2005 2006 V8 4.8L/5.3L/6.0L (Red)
Asin: B07T8B5MP3 | Ean: 0824006906230 | UPC: 824006906230
No Additional Parts Will Be Needed For Installation After You Purchase This Kit，Easy To Install Performance.
International Products Have Separate Terms, Are Sold From Abroad And May Differ From Local Products, Including Fit, Age Ratings, And Language Of Product, Labeling Or Instructions.
Features
- No additional parts will be needed for installation after you purchase this kitEasy to install performance
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
- No additional parts will be needed for installation after you purchase this kit Easy to install performance
- See more on Amazon...
Brand: MOOSUN | Manufacturer: MOOSUN
Dimensions: 5.90 x 15.00 x 11.00 inches | Weight: 7.89 Pounds
See On Amazon #12
for LS Swap Motor Mounts Adapter Plates - LS Conversion Adjustable Universal Swap Bracket Small Block Kit For LS Engine, LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet Aluminum
Asin: B09KRPST3M | Model: IVARKE-1101-1 | PartNumber: IVARKE-1101-1 | Ean: 6479295690830
Premium Quality: Our Adapter Plates Are Cnc Milled From Aluminum, Making Them The Most Accurate And Durable Option Available..
Complete Package: You'll Receive Everything You Need To Install Our Brackets, Including 2 Adapter Plates, 8 Flat Head Bolts, And 6 Flange M10-1.5 Bolts. The Plates Are M10 Threaded, So You Can Use The Hardware Included.Plus, With A 180-Day Warranty, You Can Buy With Confidence..
Easy Installation: Our Swap Motor Mounts For Ls Require No Grinding For A Flush Fit. We've Milled Out The Necessary Opening In The Center Of The Plate To Clear The Hump On The Backside Of Your Sbc/Bbc Motor Mounts..
Great Design: Our Brackets Are Designed To Fit Your Vehicle Perfectly, With Oem Specifications That Ensure The Best Possible Fitment. Plus, They'll Move The Crankshaft Centerline Up .17 Inches In Your Vehicle For Improved Performance..
Features
- FUNCTION: Our LS engine brackets allow you to easily bolt an LS series engine into your vehicle, even if it originally had a small block Chevy engine.
- GREAT DESIGN: Our brackets are designed to fit your vehicle perfectly, with OEM specifications that ensure the best possible fitment. Plus, they'll move the crankshaft centerline up .17 inches in your vehicle for improved performance.
- PREMIUM QUALITY: Our adapter plates are CNC milled from aluminum, making them the most accurate and durable option available.
- EASY INSTALLATION: Our swap motor mounts for LS require no grinding for a flush fit. We've milled out the necessary opening in the center of the plate to clear the hump on the backside of your SBC/BBC motor mounts.
- COMPLETE PACKAGE: You'll receive everything you need to install our brackets, including 2 adapter plates, 8 flat head bolts, and 6 flange M10-1.5 bolts. The plates are M10 threaded, so you can use the hardware included.Plus, with a 180-day warranty, you can buy with confidence.
- See more on Amazon...
Brand: Mejiao | Manufacturer: IVARKEY
Dimensions: 0.70 x 7.00 x 4.00 Inches
See On Amazon #13
RJSPHH LS steam vent coolant crossover ls throttle body Bypass Cylinder Head Coolant System Air Blead Plug Plates billet Compatible With Chevy LSX LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 LM7
Asin: B09923NJXZ | Ean: 0718255794758 | UPC: 718255794758
Includes All Components To Seal Off One Pair Of Ports; One Left And One Right Side Port.
Can Be Installed On The Front Or Rear Of The Cylinder Heads.
Includes 2 Coolant Ports, 2 Orings, And 2 Bolts.
Compatible With All Ls Series Engines 1997-2014.
Features
- Simplify your coolant crossover plumbing by covering the front or rear ports in your cylinder heads
- Compatible with all LS Series Engines 1997-2014
- Includes all components to seal off one pair of ports; one left and one right side port
- Includes 2 coolant ports, 2 orings, and 2 bolts
- Can be installed on the front or rear of the cylinder heads
- See more on Amazon...
Brand: RJSPHH | Manufacturer: RJSPHH
See On Amazon #14
GESEXI 4" Cold Air Intake System + Heat Shield Compatible with 1999-2006 GMC/Chevy V8 4.8L/5.3L/6.0L Silverado 1500/2500/3500 (Black & Silver)
Asin: B0BTVP8N1W
✅【Customer Supports】:This Cold Air Intake System Support 30 Days Return And Exchange. To Make Sure This Part Fits Your Exact Vehicle, Input Your Make, Model And Trim Level Into The Garage Tool. Our Company Attaches Great Importance To The Shopping Experience Of Each Customer.Risk-Free Shopping, If You Have Any Quality Problem During Warranty Period, Please Contact Customer Service In Time..
✅【Package Includes】:This 4" Cold Air Intake System Kit Includes:1X Powder Coated Steel Heat Shield, 1X Air Filter (Washable And Reusable), 1X 4" High Quality Silicone Coupler (Not Cheap Rubber), 1X 4" High Quality Silicone Coupler 90° (Not Cheap Rubber)..
✅【Easy To Install】:This Cold Air Intake System Can Increase 8-10% Of Horsepower And 6-8% Of Torque. Easy To Install And Easy To Fit With Simple Tools. Professional Installation In Highly Recommended..
✅【Features】:It's The Ultimate Performance Cold Air Intake Kit With Heat Shield. This Steel Heat Shield That Features A Durable Carbon-Black Powder Coating For Long Lasting Good Looks. The Air Intake Kit Can Help Your Engine To Draw In More Cold Air Resulting In Better Throttle Response And Higher Explosive Horsepower Output..
Features
- Compatibility :This Cold Air Intake System Kit compatible with GMC Chevy Chevro.let 1999 2000 2001 2002 2003 2004 2005 2006 V8 4.8L/5.3L/6.0L.
- Features :It's the ultimate performance Cold Air Intake Kit with Heat Shield. This steel heat shield that features a durable carbon-black powder coating for long lasting good looks. The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output.
- Customer Supports :This Cold Air Intake System support 30 days return and exchange. To make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool. Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time.
- Easy to Install :This Cold Air Intake System can increase 8-10% of Horsepower and 6-8% of torque. Easy to install and easy to fit with simple tools. Professional installation in highly recommended.
- Package Includes :This 4 Cold Air Intake System Kit includes:1x Powder coated steel heat shield, 1x Air Filter (Washable and Reusable), 1x 4 High Quality Silicone Coupler (NOT CHEAP RUBBER), 1x 4 High Quality Silicone Coupler 90 (NOT CHEAP RUBBER).
- See more on Amazon...
Brand: GESEXI | Manufacturer: GESEXI
See On Amazon #15
PQY LS Coolant Crossover Steam Vent Kit LS 4 Port Steam Line Kit Compatible with LS1 LS2 LS3 LS6 Engines
Asin: B0BVVJ4VX2
Performance:The Pqy Ls Coolant Crossover Steam Vent Kit Can Allow The Radiator Cap To Release Pressure As Intended Thereby Removing The Steam/Pressure From The System..
Installation Tip:Please Install The Ls Coolant Crossover Kit When The Engine Is Not Hot As It Can Become A Safety Hazard To Handle Hot Fluids.Does Not Have Clearance Under The Intake To Run A Proper Traditional Hard Line Steam Kit Coolant Crossover Setup..
Package Includes: 5X Center Manifold,1X Corner Manifold Ports Machines,4X Coupler,9X End Fittings,4X Lag Spike..
Application:The Ls 4 Port Steam Vent Kit Is Universal For Ls1, Ls2, Ls3, Ls6, Ls7, Ls9, Lsx Engines.Please Check The Size Of The Ls Steam Vent Line Kit Before Purchase..
Features
- LS Stainless Steam Vent Kit:The AN4 fuel brake line pipe is made of high quality stainless steel,the ls steam vent fittings are made of high quality aluminum.The fitting is designed with Tapered thread and not easy to leak,you can also use some tap onto the thread of the fitting.
- APPLICATION:The LS 4 port steam vent kit is universal for LS1, LS2, LS3, LS6, LS7, LS9, LSX engines.Please check the size of the LS steam vent line kit before purchase.
- PERFORMANCE:The PQY LS coolant crossover steam vent kit can allow the radiator cap to release pressure as intended thereby removing the steam/pressure from the system.
- PACKAGE INCLUDES: 5x Center manifold,1x Corner manifold ports machines,4x Coupler,9x End fittings,4x Lag spike.
- INSTALLATION TIP:Please install the ls coolant crossover kit when the engine is not hot as it can become a safety hazard to handle hot fluids.Does not have clearance under the intake to run a proper traditional hard line steam kit coolant crossover setup.
- See more on Amazon...
Brand: PQY | Manufacturer: PQY
See On Amazon #16
MSCRP C5 Corvette Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion
Asin: B093H7DSV5 | Model: YX01117 | PartNumber: YX01117 | Ean: 0757842752696 | UPC: 757842752696
Supports 550-600Hp.
Fit For Part Number: Gf822, 10299146, 19239926, 33737, Tbss Intake, Nnbs Intake, L92 Intake, Returnless, Ls1, Ls2, Ls3, Ls6, Lq4, Lq9, Lm7, L99, L76, Lsx, 4.8, 5.3.
Capable Of Flowing A Maximum Of 255Lph.
Features
- 58 PSI
- capable of flowing a maximum of 255LPH
- Supports 550-600HP
- Fit for Part Number: GF822, 10299146, 19239926, 33737, TBSS intake, NNBS Intake, L92 Intake, returnless, LS1, LS2, LS3, LS6, LQ4, LQ9, LM7, L99, L76, LSX, 4.8, 5.3
- See more on Amazon...
Brand: WnSEu | Manufacturer: Ruian Mu Sen Auto Parts Co., Ltd.
See On Amazon #17
YESHMA Throttle Cable Bracket Compatible with LS LS1 LS2 LS6 Cathedral Port Sheet Metal Intake Manifold Aluminum, Compatible with Chevy 4.8 5.3 5.7 6.0
Asin: B09WQMWYXK | Model: TB-1027-S-XZ | PartNumber: TB-1027-S-XZ
Application: Throttle Cable Brackets Compatible With Ls1 Ls2 Ls6 Engine. Compatible With Chevy Small Block Gen Iii/Iv (Ls-Based Engines) V8 4.8 5.3 5.7 6.0 1997-2019..
Package Includes: 2Pcs Throttle Cable Front Brackets, 1Pc Mounting Bracket, Some Bolts And Nuts..
Material: Made Of High Strength Aluminum, Stable And Not Bend With Long Service Life..
Function: Allows Forward And Reverse Placement Of The Throttle Body For More Hood Clearance..
Features
- Throttle Cable Bracket: As a bracket, it is easy to install the throttle cable to the sheet metal intake manifold.
- Function: Allows forward and reverse placement of the throttle body for more hood clearance.
- Application: Throttle cable brackets compatible with LS1 ls2 ls6 engine. Compatible with Chevy small block Gen III/IV (LS-based engines) V8 4.8 5.3 5.7 6.0 1997-2019.
- Material: Made of high strength Aluminum, stable and not bend with long service life.
- Package Includes: 2pcs Throttle cable front brackets, 1pc mounting bracket, some bolts and nuts.
- See more on Amazon...
Brand: YESHMA | Manufacturer: YESHMA
See On Amazon #18
ZBPRESS Exhaust Header, Universal LS Swap S10 Conversion Headers (LS1, LS2, LS3, LS6, LS Engines) Truck & SUV, 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Engines, V8 engines ONLY(Models Shown in Figure II)
Asin: B09YDCS3ZP | Ean: 0723496793200 | UPC: 723496793200
【Quality Materials】: Forged From High Quality Stainless Steel, Welding Process, Surface Polishing Treatment, With Good Corrosion Resistance And Sealing, Long Service Life, High Safety..
【Improve Performance】: The Inner Wall Is Smooth, No Burrs, Ultrasonic Cleaning, To Ensure That There Is No Impurities Inside The Tube,Smooth Airflow And Stable Performance，Can Increase 10-15 Horsepower..
【Precision Manufacturing】: Cnc Precision Casting Method Produces Flange, Making Its Surface Smooth And Not Easy To Deformation. Every Step Of Manufacturing Is Precisely Positioned To Ensure The Precision Of Products And Suitable For Loading..
【Easy To Install & Use】: Headers Kit Contains 2 Pieces Of Exhaust Pipe And Gaskets, Bolts And Screws Required For Installation. Meet Your Diy Needs. For Better Product Experience, You Are Advised To Install It Under Professional Guidance..
Features
- Compatible with : Fit for 1982-2004 Chevrolet S10 Truck/ GMC Sonoma Truck; Fit for 1982-2005 Chevrolet S10 Blazer/ GMC Jimmy; Fit for 1991-2001 Oldsmobile Bravada SUV.
- Easy to Install & Use : Headers Kit contains 2 pieces of exhaust pipe and gaskets, bolts and screws required for installation. Meet your DIY needs. For better product experience, you are advised to install it under professional guidance.
- Quality materials : Forged from high quality stainless steel, welding process, surface polishing treatment, with good corrosion resistance and sealing, long service life, high safety.
- Precision Manufacturing : CNC precision casting method produces flange, making its surface smooth and not easy to deformation. Every step of manufacturing is precisely positioned to ensure the precision of products and suitable for loading.
- Improve Performance : The inner wall is smooth, no burrs, ultrasonic cleaning, to ensure that there is no impurities inside the tube,Smooth airflow and stable performance Can increase 10-15 horsepower.
- See more on Amazon...
Brand: ZBPRESS | Manufacturer: BLTPress
See On Amazon #19
LS Engine Serpentine Bracket Alternator & Power Steering Pump Swap Conversion for Chevrolet LS1 LS2 LS3 LS6 LS7 Engines, 4.8L, 5.3L, 6.0L, 6.2L Truck & SUV Engines (Black)
Asin: B0B7G2ZCW1 | Model: LS1LS2LS3LS6LS7 | PartNumber: LS1LS2LS3LS6LS7 | Ean: 0789513219429 | UPC: 789513219429
🚗. Our Bracket Pushes The Power Steering Pump Up/In, And Rotates The Alternator 180* Compatible With Ls Intake Manifolds.
🚗 1 Year Warranty For It.If You Have Any Problem ,Please Contact Us And We Will Respond You On 24 Hours.
🚗 Made Of High-Quality Aluminum, With Strong Corrosion Resistance And Aging Resistance, Durable.
🚗 Tighter Power Steering Pump Placement; Organized Serpentine System.
Features
- for Chevrolet LS1 LS2 LS3 LS6 LS7 Engines, 4.8L, 5.3L, 6.0L, 6.2L Truck & SUV Engines
- Tighter Power Steering Pump Placement; Organized Serpentine System
- . Our bracket pushes the power steering pump up/in, and rotates the alternator 180* Compatible with LS Intake Manifolds
- Made of high-quality aluminum, with strong corrosion resistance and aging resistance, durable
- 1 year warranty for it.If you have any problem ,please contact us and we will respond you on 24 hours
- See more on Amazon...
Brand: RJSPHH | Manufacturer: RJSPHH
Dimensions: 1.00 x 17.00 x 6.00 inches
See On Amazon #20
Michigan Motorsports LS1 3 Wire to LS2 LS6 LQ4 Vortec to 5 Wire MAF Adapter with IAT Signal
Asin: B06Y4RGQ4B
Allows You To Use The Maf’S Built-In Iat Sensor.
Avoids The Hassle Of Cutting/Modifying Your Factory Wiring Harness.
Use Of The Built In Iat.
Allows For Use Of A 5 Wire Maf With A 3 Wire Maf And 2 Wire Iat Engine Harness.
Features
- 3 Wire to 5 Wire Mass Air Flow Adapter With Intake Air Temperature
- Allows for use of a 5 wire MAF with a 3 wire MAF and 2 wire IAT engine harness
- Allows you to use the MAF s built-in IAT sensor
- Use of the built in IAT
- Avoids the hassle of cutting/modifying your factory wiring harness
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
See On Amazon
Looking For Something Else?
Search