Steel DN Mate 40 PCS Deck Railing Bracket Connectors for 2x4 (Actual 1.5 x3.5 ) Wood Deck Railing Post to Handrail, Stair Railing Connectors with Coated Wood Screws,Drill Bit, Fence Railing Brackets
Asin: B0CHJVPCHH | Model: BC40 | PartNumber: BC40
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Unique Design】American Classic Pastoral Style: The 2X4 Brackets With Rhythmic Curved Surface Are Simple And Decorative, Creating A Natural And Comfortable Environment. Three Drainage Notches Allow Water To Run Out For Long-Lasting Durability. It Is Perfect For Both Indoor And Outdoor Cable Deck Stair Railing, Fence Railing, Porch Railing..
【Buy With Confidence】Our Brackets For Wood Work For Both Level Or Angle Stair Railing. Package Includes 40 Pcs Deck Railing Connectors, 280 Pcs Black Screws. Steel Dn Mate Offers A 60-Day Money-Back Guarantee And A 10-Year Replacement Warranty. Our Dedicated Customer Service Team Is Available 24/7 To Provide You With Prompt And Helpful Support..
【Easy Installation】1.Slide The Railing Bracket Into The Horizontal Handrail, Secure It With Screws. (Sand Or Trim The End Of Posts As Needed For A Proper Fit, Considering Wood Type And Dryness.) 2. Align The Handrail With The Post's Position, Screws Through The Side Guide Holes Into The Post To Complete The Installation. (Note: Pre-Drill Holes With The Included Drill Bit If Hard Wood Before Screwing).
【Specification】 L X W X H: 4" X 2.6" X 0.6", Actual Installation Size: 1.5"X3.5". This Deck Railing Connector Is Suitable For 2X4 Inches Wooden Post, (True Size 1-1/2 X 3-1/2 Inches). Screw: 1.5” Long. These Wood Screws Are Hardened Treated, Coated Rust-Proof. The Side 4 Screw Holes For Attaching Handrail To The Post Angle At 30 Degree Could Increase Double Weight Capacity..
Features
- Upgraded materials: Nylon 66+fiberglass Made of sturdy Nylon 66, adding sun-proof fiberglass, that makes it much stronger than other normal Nylon. The deck railing brackets are enhanced strength, stiffness, heat resistant, no bending or deformation, especially at high temperatures, providing a secure and rigid structure to the deck railing.
- Specification L x W x H: 4 x 2.6 x 0.6, actual installation size: 1.5x3.5. This deck railing connector is suitable for 2x4 inches wooden post, (true size 1-1/2 x 3-1/2 inches). Screw: 1.5 long. These wood screws are hardened treated, coated rust-proof. The side 4 screw holes for attaching handrail to the post angle at 30 degree could increase double weight capacity.
- Unique design American classic pastoral style: The 2x4 brackets with rhythmic curved surface are simple and decorative, creating a natural and comfortable environment. Three drainage notches allow water to run out for long-lasting durability. It is perfect for both indoor and outdoor cable deck stair railing, fence railing, porch railing.
- Easy installation 1.Slide the Railing Bracket into the horizontal handrail, secure it with screws. (Sand or trim the end of posts as needed for a proper fit, considering wood type and dryness.) 2. Align the handrail with the post's position, screws through the side guide holes into the post to complete the installation. (NOTE: pre-drill holes with the included drill bit if hard wood before screwing)
- Buy with Confidence Our brackets for wood work for both level or angle stair railing. Package Includes 40 pcs deck railing connectors, 280 pcs black screws. Steel DN Mate offers a 60-day money-back guarantee and a 10-year replacement warranty. Our dedicated customer service team is available 24/7 to provide you with prompt and helpful support.
- See more on Amazon...
Brand: Steel DN Mate | Manufacturer: Steel DN Mate
Dimensions: 0.80 x 4.00 x 2.60 inches
See On Amazon Similar To Steel DN Mate 40 PCS
#1
VAGURFO Rubber Edge Trim,Car Weather Striping,Door Rubber Seal Strip Trim Seal,Automotive Weather Stripping Edge Guard for Cars, Boats, RVs, Trucks, and Home Applications (20 FT)
Asin: B0BW145S74 | Model: UXMFT001 | PartNumber: UXMFT001
[Durable] The Rubber Sealing Strip Of The Car Door Can Protect Your Car From Wear And Tear In Extreme Weather, Cold And Heat Resistance, Noise, Dust And Wind, And Has Better Noise Reduction, Dust Prevention And Wind Resistance..
[Wide Application] Our U-Shaped Car Door Sealing Strip Has Two Sizes To Choose From: 10 Feet And 20 Feet. It Is Applicable To The Sealing Of Various Ships, Cars, Rvs And Trucks, As Well As Various Doors, Windows And Buildings; Sealing Strips For Various Electrical Cabinets, Generators And Metal Plates..
[Easy To Install] The Rubber Sealing Strip Of The Door With Side Bulb Is Easy To Install, And It Can Be Quickly Installed Without Adhesive, Just By Pushing And Pressing The Decorative Seal, Which Is Very Convenient..
[Soft] The Car Weatherstrip Is Very Soft. It Can Be Easily Bent Along The Installation Contour Or Cut At Will..
Features
- [High Quality] The edge trim strip of rubber sealing strip is made of high-quality soft rubber and contains stainless steel clips inside. It can be used around the installation site without falling off easily.
- [Soft] The car weatherstrip is very soft. It can be easily bent along the installation contour or cut at will.
- [Durable] The rubber sealing strip of the car door can protect your car from wear and tear in extreme weather, cold and heat resistance, noise, dust and wind, and has better noise reduction, dust prevention and wind resistance.
- [Easy to Install] The rubber sealing strip of the door with side bulb is easy to install, and it can be quickly installed without adhesive, just by pushing and pressing the decorative seal, which is very convenient.
- [Wide Application] Our U-shaped car door sealing strip has two sizes to choose from: 10 feet and 20 feet. It is applicable to the sealing of various ships, cars, RVs and trucks, as well as various doors, windows and buildings; Sealing strips for various electrical cabinets, generators and metal plates.
- See more on Amazon...
Brand: VAGURFO | Manufacturer: VAGURFO
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #2
10pcs Screw Bolt Retainer Fender Liner Under Cover - Screw Truss Head Bumper Splash Guard Fender Liner Splash Shield Bumper Cover Self Tapping Compatible with N90974701 Volkswagon,Audi,Porsche
Asin: B09TB951PB | Model: Cekaso-Clips | PartNumber: Cekaso-Clips
Function --- Used For Fender Liner, Bumper Cover, Air Duct, Splash Shield, Plastic Trim, Etc..
Serve --- We Serve You 24 Hours A Day. After You Receive The Product, If There Is Any Problem, Please Send Us An Email In Time.
Specification --- 10 Pcs Stainless Steel Hex Head Screws, Top Head Diameter:14Mm, Screw Length:18Mm, Screw Diameter:7Mm.
Chemical Resistance --- Wide Variety Of Chemicals Resistance, Gasoline, Engine Oil, Anti-Freeze Fluid, Windshield Washer Fluid, Lubrication Oil Etc.Heat Resistant Suitable For High-Temperature Applications, Eco-Friendly, Non-Pollution In Treatment Process.
Features
- Material --- High Quality Steel having excellent toughness,Excellent workmanship are necessary conditions for product reliability, stability and long-term use, We check the products again before shipping for you
- Chemical Resistance --- Wide variety of chemicals resistance, Gasoline, Engine Oil, Anti-freeze fluid, Windshield Washer Fluid, Lubrication Oil etc.Heat Resistant Suitable for high-temperature applications, Eco-friendly, Non-Pollution in Treatment Process
- Function --- Used for Fender liner, bumper cover, air duct, splash shield, plastic trim, etc.
- Specification --- 10 PCS Stainless steel Hex Head Screws, Top head diameter:14mm, Screw length:18mm, Screw diameter:7mm
- Serve --- We serve you 24 hours a day. After you receive the product, if there is any problem, please send us an email in time
- See more on Amazon...
Brand: Cekaso | Manufacturer: Cekaso
See On Amazon #3
bylikeho License Plate Screws,Car Accessories Automotive Exterior Accessories Black License Plate Screws License Plate Bolts Kit,License Plate Fasteners with Nylon Screw Inserts,Fits Cars,SUVs,Trucks
Asin: B0CX4J3R6R | Model: 1414CPLS001 | PartNumber: 1414CPLS001
[Function] The License Plate Screw Kit For Front And Rear License Plates Is Used To Help Secure The Rear Metal Plate Of The Car. It Can Perfectly Replace Loose Or Damaged License Plate Screws, Personalize Your License Plate, And Achieve A Perfect Appearance..
[Applicable] Our License Plate Fasteners Are Standard Size 1/4 "Diameter X 3/4" Long Self Tapping Screws, Suitable For Most Vehicles Using Nylon/Plastic Screw Fasteners. From Sedans To Suvs, From Motorcycles To Rvs. Metal Threaded Holes Require Different Types Of Screws, So We Recommend Checking The Compatibility Of Vehicle Applications..
[Easy To Install]These License Plate Bolts Are Easy To Install, Just Use A Simple Screwdriver To Install These License Plate Fasteners Onto Your Vehicle. No Special Tools Or Tedious Drill Bits Are Required. This License Plate Screw Kit Is An Ideal Choice For First-Time Car Buyers And Experienced Drivers..
[High Quality Materials]The Universal License Plate Screws Are Made Of High-Quality Stainless Steel With A Smooth, Unpainted Black Finish, Which Will Not Crack Or Peel Off. They Have Rust Prevention Protection And Salt Water Resistance. The Screw Inserts Are Made Of High-Quality Nylon, Which Is Durable And Has A Long Service Life..
Features
- [Set Includes]The set includes 8 license plate screws and 8 nylon screw inserts, making it easy to secure your license plate with this complete original equipment style fastener kit.
- [High Quality Materials]The universal license plate screws are made of high-quality stainless steel with a smooth, unpainted black finish, which will not crack or peel off. They have rust prevention protection and salt water resistance. The screw inserts are made of high-quality nylon, which is durable and has a long service life.
- [Function] The license plate screw kit for front and rear license plates is used to help secure the rear metal plate of the car. It can perfectly replace loose or damaged license plate screws, personalize your license plate, and achieve a perfect appearance.
- [Easy to Install]These license plate bolts are easy to install, just use a simple screwdriver to install these license plate fasteners onto your vehicle. No special tools or tedious drill bits are required. This license plate screw kit is an ideal choice for first-time car buyers and experienced drivers.
- [Applicable] Our license plate fasteners are standard size 1/4 diameter x 3/4 long self tapping screws, suitable for most vehicles using nylon/plastic screw fasteners. From sedans to SUVs, from motorcycles to RVs. Metal threaded holes require different types of screws, so we recommend checking the compatibility of vehicle applications.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #4
UZZH Engine Thermostat for Car, High Performance Termostato, Automotive Replacement Engine Coolant Thermostats 19301-PAA-306 19301-PLC-315 Compatible with Honda Accord Civic CRV CRZ Insight Odyssey
Asin: B0CWR4YYJL | Model: UZZH-Auto10 | PartNumber: UZZH-Auto10
【Replace Oem Number】: The Engine Thermostat Perfectly Replaces Oem #19301-Paa-306, 19301Paa306, 19301-Plc-315, 19301Plc315. Please Confirm Whether This Model Matches Your Car Before Purchasing..
【When To Replace】: When The Temperature Reading Is High And The Engine Is Overheated, When The Reading Is Low And The Engine Is Underheated, When The Temperature Changes Irregularly, Or When There Is Coolant Leakage Around The Thermostat Housing Or Under The Car, It Reminds You That The Engine Thermostat Needs To Be Replaced..
【Function】: The Termostato Can Control The Coolant Flow To Adjust The Temperature Of The Engine, Ensuring That The Engine Works At A Suitable Temperature, And Effectively Solving The Problems Of Engine Hiccups Or Overcooling Or Overheating..
【Applicable Models】: The Car Coolant Thermostat Is Suitable For 1990-2002 Accord, 1988-2015 Civic, 1993-1997 Civic Del Sol, 2010-2013 City, 1997-2001 Crv, 2011-2016 Crz, 1988-1991 Crx, 2007 -2013 Fit, 2010-2014 Insight, 2016-2020 Hr-V, 1995-1998 Odyssey, 1992-1996 Prelude, 1997-1999 Acura Cl, 1997-2005 Acura El, 2013-2015 Acura Ilx, 1986-2001 Acura Integra, 1986-1990 Acura Legend..
Features
- High Quality : This engine thermostat for car is made of stainless steel and copper, which is sturdy and durable, works stably, can withstand extreme temperature changes, is not easy to rust and corrode, and has a long service life.
- Applicable Models : The car coolant thermostat is suitable for 1990-2002 Accord, 1988-2015 Civic, 1993-1997 Civic del Sol, 2010-2013 City, 1997-2001 CRV, 2011-2016 CRZ, 1988-1991 CRX, 2007 -2013 Fit, 2010-2014 Insight, 2016-2020 HR-V, 1995-1998 Odyssey, 1992-1996 Prelude, 1997-1999 Acura CL, 1997-2005 Acura EL, 2013-2015 Acura ILX, 1986-2001 Acura Integra, 1986-1990 Acura Legend.
- Replace OEM Number : The engine thermostat perfectly replaces OEM #19301-PAA-306, 19301PAA306, 19301-PLC-315, 19301PLC315. Please confirm whether this model matches your car before purchasing.
- Function : The termostato can control the coolant flow to adjust the temperature of the engine, ensuring that the engine works at a suitable temperature, and effectively solving the problems of engine hiccups or overcooling or overheating.
- When to Replace : When the temperature reading is high and the engine is overheated, when the reading is low and the engine is underheated, when the temperature changes irregularly, or when there is coolant leakage around the thermostat housing or under the car, it reminds you that the engine thermostat needs to be replaced.
- See more on Amazon...
Brand: UZZH | Manufacturer: UZZH
Dimensions: 2.52 x 4.96 x 2.44 inches
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #5
bylikeho Battery Terminal Bolt,Car Accessories Battery Terminal T-Bolt Kit,Battery Terminal Nuts Replacement,Car Battery Cable Extender T Bolt,Replace #19116852,6X0915138,61128373946,64740 (2PCS)
Asin: B0CXPLGNW7 | Model: 1452TXLS001 | PartNumber: 1452TXLS001
[Easy To Install] The Battery Terminal Bolts Are Easy To Install, Just Manually Install Them In The Target Position, And Can Be Installed In Just A Few Seconds Without The Need For Tools Or Instructions, Saving You Time And Energy.
[Replacement Part Number] The Battery Terminal T Bolt Is An Ideal Replacement For Original Equipment, Matching The Fit And Function Of Most Factory Parts Specified In The Year, Brand, And Model, Making It Easy To Replace Damaged Factory Bolts. Replacement Part Numbers: 19116852, 6X0915138, 61128373946, 64740..
[Installation Tip] Do Not Over Ttighten. They Are Prone To Breakage To Prevent Damage To The Battery Or Battery Cables And Terminals..
[High Quality Materials] These Battery Connection Bolts And Nuts For Replacing Automotive Terminals Are Made Of Double Headed Stainless Steel Bolts, Which Are Not Easy To Break, Deform Or Rust. The Manufacturing Process Is Fine, And The Performance Is Reliable, Ensuring The Safety And Reliability Of Battery Connections, Providing You With Long-Term Applications..
Features
- [Package Includes]We offer two sets for you to choose from: 2 battery terminal bolt sets and 4 battery terminal bolt sets. The sets include bolts, nuts, and washers, and the quantity is sufficient to meet your daily use and replacement needs.
- [High Quality Materials] These battery connection bolts and nuts for replacing automotive terminals are made of double headed stainless steel bolts, which are not easy to break, deform or rust. The manufacturing process is fine, and the performance is reliable, ensuring the safety and reliability of battery connections, providing you with long-term applications.
- [Easy to Install] The battery terminal bolts are easy to install, just manually install them in the target position, and can be installed in just a few seconds without the need for tools or instructions, saving you time and energy
- [Installation Tip] Do not over ttighten. They are prone to breakage to prevent damage to the battery or battery cables and terminals.
- [Replacement Part Number] The battery terminal t bolt is an ideal replacement for original equipment, matching the fit and function of most factory parts specified in the year, brand, and model, making it easy to replace damaged factory bolts. Replacement part numbers: 19116852, 6X0915138, 61128373946, 64740.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #6
bylikeho Chain Breaker,Chain Breaker Riveting Tool,Motorcycle Chain Breaker,Car Accessories Chain Tool for Dirt Pit Bike ATV Motorcycle Bicycle Chain Break #420 428 520 525 528 530
Asin: B0CW96Q5PP | Model: 1360CLQ001 | PartNumber: 1360CLQ001
[Save Labor]The Chain Circuit Breaker Adopts A Labor-Saving Design, Which Can Easily Cut The Chain To The Required Length, Making Your Work Easier. Allow You To Easily Remove Chains From Various Applications..
[Applicable] This Chain Breaker Is Suitable For 420 428 520 525 528 530 Roller Chains. It Is Widely Used To Adjust The Roller Chain Length Of 50Cc, 70Cc, 90Cc, 110Cc, 125Cc Atvs, As Well As Off-Road Bicycles, Go Karts, Mini Bicycles, Scooters, Pit Bikes, Quads, Etc..
[Suggestion] It Is Strongly Recommended To Grind Off The Chain Pin Head Before Using This Tool. This Will Significantly Reduce The Load On The Tool And Help Prevent Premature Wear Or Damage To The Fracture Tip..
[Comfortable Handle] The Chain Tool Adopts A Smooth Handle Design, With An Arc-Shaped Handle For Comfortable Grip And Beautiful Appearance. There Is A Hanging Hole At The Tail For Easy Placement..
Features
- [High Quality Materials]The bicycle chain tool is made of high-quality steel, with a rust resistant surface and strong corrosion resistance. High hardness, less prone to deformation and fracture. The durable structure ensures long-lasting use and reliable performance.
- [Comfortable Handle] The chain tool adopts a smooth handle design, with an arc-shaped handle for comfortable grip and beautiful appearance. There is a hanging hole at the tail for easy placement.
- [Save Labor]The chain circuit breaker adopts a labor-saving design, which can easily cut the chain to the required length, making your work easier. Allow you to easily remove chains from various applications.
- [Suggestion] It is strongly recommended to grind off the chain pin head before using this tool. This will significantly reduce the load on the tool and help prevent premature wear or damage to the fracture tip.
- [Applicable] This chain breaker is suitable for 420 428 520 525 528 530 roller chains. It is widely used to adjust the roller chain length of 50cc, 70cc, 90cc, 110cc, 125cc ATVs, as well as off-road bicycles, go karts, mini bicycles, scooters, Pit bikes, Quads, etc.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
See On Amazon #7
Deck Man T316-Stainless Steel Adjustable Angle 1/8" Cable Railing Kit/Hardware for Wood Post Marine Grade (10 Pack)
Asin: B07PCTLJPG | Ean: 0787414020922 | UPC: 787414020922
It Applies To Standard 1/8" Inch Cable， Hydraulic Crimper Is Needed To Connect This Kit With The Cable And 4# Dies Is Suitable;.
Under Strict Process Control And With Advanced Technology, Our Products Have High Quality And Excellent Workmanship. We Believe That You Will Like This Kit..
Max Expanding Size Of The Swage Turnbuckle Is 10 Inch And It Can Be Retract To 7 Inch; This Item Include 40 Pcs Stainless Steel Countersunk Screws And 1 Pcs Drill Bit For Wooden Post, Length Of Screws Is 1.2Inch；.
This Railing Kit Made Of High Quality Marine Grade T316-Stainless Steel，It Is Anti-Rust、 Durable And Easy To Maintain；.
Features
- The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted So they can be used to all kinds of complex cable railing system railing of stairs deck railing and Garden fence
- This railing kit made of high quality Marine Grade T316-Stainless Steel It is anti-rust durable and easy to maintain
- It applies to standard 1/8 inch cable Hydraulic crimper is needed to connect this kit with the cable and 4# dies is suitable;
- Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch; this item include 40 Pcs stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch
- Under strict process control and with advanced technology, our products have high quality and excellent workmanship. We believe that you will like this kit.
- See more on Amazon...
Brand: Deck Man | Manufacturer: Liwea
See On Amazon #8
Steel DN Mate 70 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Included DM35
Asin: B09CPN7WQZ | Model: DM35 | PartNumber: DM35
🔧Length Of Cable Should Be 1-1/2" Shorter Than Wood Surface Distance（As Shown In Pic.4); If You Want To Build A High-Quality Cable Railing System, Standard 1/8" (Od) Cable Which Was Made Of T316-Stainless Steel Is Recommended..
🔧We Have Perfect After-Sale Service. Steel Dn Mate Offers With A 10-Year Warranty Free Service. --If You Are A New Beginner Or Not Sure How To Do It, Please Contact Us By Clicking On "By Steel Dn Mate" Below "Add To Cart." Let's Help You, Then You Can Follow The Shopping List To Buy All The Items Needed In 1 Minute..
🔧The Lag Screws Could Be Drilled Into Wood To Adjust The Tightness Without An Extra Turnbuckle Or Tensioner. Deck And Stair Cable Railing System Is Not Only Simple But Also Won't Block Your View. The Lag Screws Could Be Drilled Into Wood To Adjust The Tightness Without An Extra Turnbuckle Or Tensioner. Deck And Stair Cable Railing System Is Not Only Simple But Also Won't Block Your View. A Simple Cost-Effective Cable Railing System Usually Includes 1/8" Lag Screw Dm60, 1/8" Steel Cable And Cutter Dw40, Hydraulic Crimper Dc01.For Angle Stair Railing, Drill Jig Dg12. You Can You Can Scroll Down This Page To Get Them..
🔧This Deck Railing Hardware Fits 1/8" Od Cable Of The Cable Deck Railing System. The Thread Lag Screws Are Designed For Timber/Wood Posts. It Will Rotate The Wire Rope In The Same Direction, Which Resolves The Problem Of Twisting The Attached Wire. This Design Can Make Wire Deck Railing Hardware Fits Last Longer..
Features
- New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, terrace railings, and deck railings. With our new made wrench, installation becomes much easier. Starting Jan. 30, 2024, Our 70-Pack is Upgraded with 2 Wrenches for Easier, Quicker Installation.
- This deck railing hardware fits 1/8 OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer.
- Length of cable should be 1-1/2 shorter than wood surface distance as shown in pic.4); if you want to build a high-quality cable railing system, standard 1/8 (OD) cable which was made of T316-stainless steel is recommended.
- The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable railing system usually includes 1/8 lag screw DM60, 1/8 steel cable and cutter DW40, hydraulic Crimper DC01.For angle stair railing, drill jig DG12. You can You can scroll down this page to get them.
- We have perfect after-sale service. Steel DN Mate offers with a 10-year warranty Free Service. --If you are a new beginner or not sure how to do it, please contact us by clicking on by Steel DN Mate below add to cart. Let's help you, then you can follow the shopping list to buy all the items needed in 1 minute.
- See more on Amazon...
Brand: Steel DN Mate | Manufacturer: Steel DN Mate
Weight: 1.00 pounds
See On Amazon #9
VAGURFO Car Scratch Remover,Car Scratch Repair,Car Accessories Car Scratch Repair Paint Pen,Scratch Remover for Vehicles,Portable Automotive Touch Up Paint for Deep Scratches,Fits Various Vehicles
Asin: B0CW1YW76V | Model: 1352DTYQB002 | PartNumber: 1352DTYQB002
[Instructions] 1. Clean The Scratched Area Before Use. 2. Remove Wax From The Scratch Area. 3. Remove Rust. 4. Keep Upward After Use. 5. Easy To Dry, Please Tighten The Pen Cap After Using The Pen. You Can Practice On Some Scrap Metal Or Cardboard To Stabilize Your Hands And Allow For The Correct Amount Of Paint To Be Applied. Don't Worry, Take It Slow. You Will Find That This Is An Economic Method To Prevent Metal Rust..
[Widely Applicable] We Offer A Variety Of Color Car Paint Brushes For You To Choose From And Purchase. The Car Paint Adopts A Special Configuration Of The Original Color Label, Which Is Suitable For Most Brands Of Cars. It Can Quickly And Easily Repair Scratches On The Car, Restore The Appearance Of The Vehicle, And Is A Must-Have For Car Enthusiasts And Drivers..
[Kind Reminder] 1. To Ensure Effectiveness, Please Try To Use This Car Paint Filler Pen On Sunny Days. Before Using This Product, Please Make Sure To Remove Foreign Objects Such As Oil Stains, Wax, And Rust From The Surface Of The Car Paint. 3. Before Use, Please Make Sure To Shake The Bottle For More Than 20 Seconds To Make The Steel Balls Inside The Jar Creak, In Order To Mix The Paint Evenly..
[Save Money And Time]We Know That Ugly Car Scratches Can Make Your Car Look Unsightly And Expose The Metal Underneath The Paint To The Air, Causing Rust. This Car Repair Paint Can Seal Scratches And Save You A Lot Of Money To Repair Small Scratches. Save Money And Time, The Paint Surface Will Be More Glossy After Use, And The Color Difference Between The Repaired Area And The Original Car Paint Will Be Coordinated And Consistent. The Repaired Paint Surface Will Be More Natural..
Features
- [Soft Brush Head Design] The soft brush head design of the car repair paint pen makes the repair of scratches on the car paint surface more accurate and convenient, waterproof and portable, very practical.
- [Save Money and Time]We know that ugly car scratches can make your car look unsightly and expose the metal underneath the paint to the air, causing rust. This car repair paint can seal scratches and save you a lot of money to repair small scratches. Save money and time, the paint surface will be more glossy after use, and the color difference between the repaired area and the original car paint will be coordinated and consistent. The repaired paint surface will be more natural.
- [Instructions] 1. Clean the scratched area before use. 2. Remove wax from the scratch area. 3. Remove rust. 4. Keep upward after use. 5. Easy to dry, please tighten the pen cap after using the pen. You can practice on some scrap metal or cardboard to stabilize your hands and allow for the correct amount of paint to be applied. Don't worry, take it slow. You will find that this is an economic method to prevent metal rust.
- [Kind Reminder] 1. To ensure effectiveness, please try to use this car paint filler pen on sunny days. Before using this product, please make sure to remove foreign objects such as oil stains, wax, and rust from the surface of the car paint. 3. Before use, please make sure to shake the bottle for more than 20 seconds to make the steel balls inside the jar creak, in order to mix the paint evenly.
- [Widely Applicable] We offer a variety of color car paint brushes for you to choose from and purchase. The car paint adopts a special configuration of the original color label, which is suitable for most brands of cars. It can quickly and easily repair scratches on the car, restore the appearance of the vehicle, and is a must-have for car enthusiasts and drivers.
- See more on Amazon...
Brand: VAGURFO | Manufacturer: VAGURFO
See On Amazon #10
Hirificing 170PCS Car U Clips Screw Assortment Kit for Door Dash Panel Interior,9 Different Sizes with 85PCS Cross Head Mounting Screws and 85PCS Metal U-Clip Screw Nuts Set
Asin: B0CXGXD3S5 | Model: Hirificing-AUTO-11 | PartNumber: Hirificing-AUTO-11
【High Quality】These Automotive Screws And Clips Assortment Sets Are Made Of Black Oxidized Spring Steel And Galvanized Steel, Which Are Strong And Not Easy To Deform, And Are Extremely Rust-Proof And Corrosion-Resistant For Long-Term Use..
【Get It Quickly】These U-Clip Screw Kit For Dash Door Panel Interior Trim Panels Use A Transparent Storage Box, Which Allows You To See The Type Of Nuts At A Glance, And There Is A Clear Size Information Diagram On The Storage Box Lid, Which Can Helps You Quickly Find The Size Of Screws You Need..
【Classified Storage】Our Car U Shape Clip And Screw Assortment Kit Contains 170 Pieces Of 9 Different Categories Of U-Shaped Clips And Screws Classified And Stored In A Compact Plastic Box. The Quantity Is Sufficient To Meet Your Daily Needs..
【Multiple Sizes】These 170Pcs Car U- Clips With Screw Assortment Kit Includes 4 Sizes Of Phillips Screws：40Pcs 3X8mm, 20Pcs 4X16mm, 15Pcs 5X12mm, 10Pcs 6X20mm. Also Includes 5 Sizes Of U-Shaped Clips： 20Pcs 3Mm, 20Pcs 3Mm, 20Pcs 4Mm, 15Pcs 5Mm, And 10Pcs 6Mm..
Features
- Widely Used Our 170pcs car screw assortment kit is suitable for all types of car repairs and is widely used in door trims, dash, fenders, bumpers, interior trim panels, grilles, radiators, shield yokes, engine cover, side skirts, can also be used for furniture repair.
- Multiple Sizes These 170pcs car u- clips with screw assortment kit includes 4 sizes of Phillips screws 40pcs 3x8MM, 20pcs 4x16MM, 15pcs 5x12MM, 10pcs 6x20MM. Also includes 5 sizes of U-shaped clips 20pcs 3MM, 20pcs 3MM, 20pcs 4MM, 15pcs 5MM, and 10pcs 6MM.
- High Quality These automotive screws and clips assortment sets are made of black oxidized spring steel and galvanized steel, which are strong and not easy to deform, and are extremely rust-proof and corrosion-resistant for long-term use.
- Classified Storage Our car u shape clip and screw assortment kit contains 170 pieces of 9 different categories of U-shaped clips and screws classified and stored in a compact plastic box. The quantity is sufficient to meet your daily needs.
- Get It Quickly These U-clip screw kit for dash door panel interior trim panels use a transparent storage box, which allows you to see the type of nuts at a glance, and there is a clear size information diagram on the storage box lid, which can helps you quickly find the size of screws you need.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 1.18 x 8.35 x 4.19 inches | Weight: 0.71 Pounds
See On Amazon #11
bylikeho UTV Wiper,UTV Windshield Wiper Kit,Car Accessories UTV Manual Hand Operated Windshield Wiper Assembly with Instruction,Compatible with Polaris Ranger RZR Can Am Kawasaki Pioneer Golf Cart
Asin: B0CWDJGN3K | Model: 1376SDYGQ001 | PartNumber: 1376SDYGQ001
[Silent Wiping]This Windshield Wiper Adopts A Flexible Soft Layer Design To Reduce Noise And Achieve Silent Wiping. Improved Airflow Aerodynamics Without Rusting Or Creaking..
[Applicable] Suitable For Most Utvs, Golf Carts, Agricultural Vehicles, Tricycles, And Tractors, Hard Coated Polycarbonate Windshields Or Glass Windshields. Please Note That Before Installation, You Must Drill A 1/2 "Hole On The Windshield To Install..
[Product Size] 16 "Rubber Blade, 18" From The Center Of The Handle To The End Of Most Sxs Wipers. Provide One Spare Wiper Blade For Free..
[Function] The Utv Manual Wiper Can Remove Water Droplets, Helping To Maintain A Clear View Of The Road Ahead In The Event Of Mud Splashing Or Starting Rain, And Increasing Safety While Driving..
Features
- [High Quality Materials]Our UTV manual windshield wipers are made of high-quality materials, clean, silent, and durable.
- [Function] The UTV manual wiper can remove water droplets, helping to maintain a clear view of the road ahead in the event of mud splashing or starting rain, and increasing safety while driving.
- [Silent Wiping]This windshield wiper adopts a flexible soft layer design to reduce noise and achieve silent wiping. Improved airflow aerodynamics without rusting or creaking.
- [Product Size] 16 rubber blade, 18 from the center of the handle to the end of most SxS wipers. Provide one spare wiper blade for free.
- [Applicable] Suitable for most UTVs, golf carts, agricultural vehicles, tricycles, and tractors, hard coated polycarbonate windshields or glass windshields. Please note that before installation, you must drill a 1/2 hole on the windshield to install.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #12
bylikeho 12PCS Differential Oil Drain Plug Gaskets,Differential Transfer Case Crush Washer Gasket,Car Accessories Transfer&Differential Service Gasket Kit,Replace #9043024003, 1215710010, 90430A0003
Asin: B0CWR4QR6D | Model: 1401FDXFYDQ001 | PartNumber: 1401FDXFYDQ001
[Safe Fit]Our Drain Plug Gasket Meets Or Exceeds Oem Specifications, Providing A More Durable Sealing Capability. Tight And Flush, It Is Tighter And Safer Than Plastic Or Rubber Seals, And Has A More Durable Sealing Ability..
[Replacement Part Numbers] 9043024003, 1215710010, 90430A0003..
Flush, It Is Tighter And Safer Than Plastic Or Rubber Seals, And Has A More Durable Sealing Ability. [Specification] Oil Drain Plug Gasket: Size M18 * M24, Inner Diameter 18.2Mm, Outer Diameter 24.2Mm, Thickness 2.50Mm. Copper Washer: Inner Diameter: 24 Mm, Outer Diameter: 32 Mm, Nominal Size: M24 * M32, Thickness: 1 Mm. Aluminum Oil Drain Plug Gasket Is Used For Transfer Case 18Mm Aluminum Extruded Gasket..
[High Quality Materials]Our Shatterproof Gasket Drain Plug Is Made Of High-Quality Aluminum/Copper Steel Alloy, Ensuring Durability And Reliability. Advanced Manufacturing Technology Ensures Uniform Surface Cleanliness And Prevents Gasket Corrosion. These Drain Plug Gaskets Are Designed To Withstand The Most Extreme Conditions And Provide Long-Lasting Performance That You Can Trust..
Features
- [Set Includes]6 pieces of steel oil drain plug gaskets, 2 pieces of copper gaskets, and 4 pieces of aluminum oil drain plug gaskets. The comprehensive gasket kit is a complete set of front and rear differentials and transfer boxes.
- [High Quality Materials]Our shatterproof gasket drain plug is made of high-quality aluminum/copper steel alloy, ensuring durability and reliability. Advanced manufacturing technology ensures uniform surface cleanliness and prevents gasket corrosion. These drain plug gaskets are designed to withstand the most extreme conditions and provide long-lasting performance that you can trust.
- [Safe Fit]Our drain plug gasket meets or exceeds OEM specifications, providing a more durable sealing capability. Tight and flush, it is tighter and safer than plastic or rubber seals, and has a more durable sealing ability.
- flush, it is tighter and safer than plastic or rubber seals, and has a more durable sealing ability. [Specification] oil drain plug gasket: size M18 * M24, inner diameter 18.2mm, outer diameter 24.2mm, thickness 2.50mm. Copper washer: inner diameter: 24 mm, outer diameter: 32 mm, nominal size: M24 * M32, thickness: 1 mm. Aluminum oil drain plug gasket is used for transfer case 18mm aluminum extruded gasket.
- [Replacement part numbers] 9043024003, 1215710010, 90430A0003.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #13
bylikeho PZ20 Carburetor,Car Accessories Carburetor Set with Air Filter and Fuel Filter for Kazuma Baja 50-125cc NST SunL Chinese Quad 4 stroke ATV 4 wheeler Go kart Dirt Bike CRF50F XL75 CRF80F XR50R
Asin: B0CW5SV6CH | Model: 1361HYQJT001 | PartNumber: 1361HYQJT001
[Size] Inner Diameter Of Carburetor Inlet: 20Mm. Side Hole To Hole Bolt Connection: 48Mm. Air Filter Diameter: 32Mm..
[Tip] Before Purchasing, Please Ensure That The Interchangeable Part Number Matches The Part To Be Replaced. Please Check Our Photos To Ensure That The Displayed Part Matches Your Inventory Part..
[Applicable]Suitable For 50Cc 70Cc 90Cc 110Cc 125Cc Taotao Cooler Venom X-Pro Sunl Icebear Loncin Kazuma Falcon Vitacci Baja Apollo Hong * Ssr Xmotos Lifan Yamah * Chinese Atv Quad 4 Wheeler Pit Off-Road Bike..
[High Quality Materials]The Pz20 Carburetor Is Made Of High-Quality Materials, With Reliable Accessory Quality, High Durability And Safety, And A Long Service Life..
Features
- [Set Includes]1 x PZ20 carburetor, 1x fuel line, 2x fuel filter, 2x gasket, 2x intake manifold gasket, 2x O-ring, 1 x 35mm air filter, 1x air filter clamp.
- [High Quality Materials]The PZ20 carburetor is made of high-quality materials, with reliable accessory quality, high durability and safety, and a long service life.
- [Size] Inner diameter of carburetor inlet: 20mm. Side hole to hole bolt connection: 48mm. Air filter diameter: 32mm.
- [Applicable]Suitable for 50cc 70cc 90cc 110cc 125cc TaoTao Cooler Venom X-pro Sunl Icebear Loncin Kazuma Falcon Vitacci Baja Apollo Hong * SSR Xmotos Lifan Yamah * Chinese ATV Quad 4 Wheeler Pit off-road bike.
- [Tip] Before purchasing, please ensure that the interchangeable part number matches the part to be replaced. Please check our photos to ensure that the displayed part matches your inventory part.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #14
bylikeho Trailer License Plate Bracket,Car Accessories Trailer License Plate Bracket Holder,Utility Car Tag Frame Kit with Mounting Screws and Caps,Aluminum Bracket Holder
Asin: B0CR15XYDF | Model: 1239WDZJ001 | PartNumber: 1239WDZJ001
[Fashion Design] The Shiny Surface And Embossed Pattern, Along With The License Plate Light Bracket, Make Your Vehicle Look More Outstanding, Adding Beauty To Your Trailer Or Truck And Making It Stand Out..
[Widely Applicable] The Bracket Installation Size Is 1-5/8 "~2-1/2", And The License Plate Installation Size Is 4 "~8-5/8". It Is Suitable For Most Trucks, Trailers, Rvs, Boats, Snowmobile Vehicles, Atvs, And Multi-Purpose Trailers..
[Easy To Install] Installing The License Plate Holder With Lights Only Takes A Few Minutes. First, Remove The Old License Plate Holder And The License Plate And Tail Lights On It; Secondly, Use Our New Aluminum License Plate Holder, Remove The Blue Protective Film From The Surface, Align The Tail Light Screws, And Secure The License Plate Holder; Finally, Install And Secure The Vehicle License Plate..
[Features] This Trailer License Plate Holder Frame Can Replace Plastic License Plate Holders, Making It More Durable, Sturdy, And Lightweight. Reliable Use Is A Good Way To Replace Old Or Damaged Brackets..
Features
- [High Quality Materials]Our license plate holder is made of rust proof stainless steel, with a smooth and high gloss surface that is very sturdy and not easy to break. The surface has an anti scratch protective film to protect the smooth surface, which is rust proof and corrosion-resistant, sturdy and durable.
- [Features] This trailer license plate holder frame can replace plastic license plate holders, making it more durable, sturdy, and lightweight. Reliable use is a good way to replace old or damaged brackets.
- [Fashion Design] The shiny surface and embossed pattern, along with the license plate light bracket, make your vehicle look more outstanding, adding beauty to your trailer or truck and making it stand out.
- [Easy to Install] Installing the license plate holder with lights only takes a few minutes. First, remove the old license plate holder and the license plate and tail lights on it; Secondly, use our new aluminum license plate holder, remove the blue protective film from the surface, align the tail light screws, and secure the license plate holder; Finally, install and secure the vehicle license plate.
- [Widely Applicable] The bracket installation size is 1-5/8 ~2-1/2, and the license plate installation size is 4 ~8-5/8. It is suitable for most trucks, trailers, RVs, boats, snowmobile vehicles, ATVs, and multi-purpose trailers.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Dimensions: 0.10 x 1.00 x 1.00 inches
Warranty: no
See On Amazon #15
bylikeho Harmonic Balancer Puller Kit,Harmonic Damper Pulley Puller,Automotive Specialty Tools,Car Accessories Adjustable 3-Jaw Puller for Harmonic Balancer Removal,Compatible with GM and More
Asin: B0CRH1VCK9 | Model: 1268SZPDPCZQ001 | PartNumber: 1268SZPDPCZQ001
[Set Includes]This Mechanical Tool Kit Includes A Three Jaw Puller For A Secure And Reliable Grip, A Push Bolt Suitable For 19 Mm Hexagonal Drive, A 3/8 "Square Drive Tool That Easily Centers The Drive Rod, And Four Top Rods (4", 5.4 ", 6.2", 7.5 ") To Make Your Work Fast And Efficient..
[Widely Applicable]Our Harmonic Shock Pulley Puller Kit Is Suitable For Balancers Of Various Domestic And Imported Vehicles, And Is Compatible With Many Sedans, Suvs, Box Trucks, And Pickup Trucks..
[Easy To Store] The Harmonic Damper Pulley Puller Kit Includes A High-Quality Storage Box With Handles And Pins For Safe Storage, Convenient Transportation, And Organization..
[Function]This Harmonic Balancer Puller Kit Is Designed To Simplify The Operation Of Pulling The Balancer Pulley. It Reduces Damage To Pulleys And Shafts. The U-Shaped Clamp Pin Allows For Quick Disassembly And Installation Of The Jaws.
Features
- [High Quality and Durable]The harmonic balancer puller adopts an enhanced design with spring support legs to achieve optimal position retention; All steel structure, with additional strength and service life; Black oxide finish with anti-corrosion properties.
- [Function]This harmonic balancer puller kit is designed to simplify the operation of pulling the balancer pulley. It reduces damage to pulleys and shafts. The U-shaped clamp pin allows for quick disassembly and installation of the jaws
- [Set Includes]This mechanical tool kit includes a three jaw puller for a secure and reliable grip, a push bolt suitable for 19 mm hexagonal drive, a 3/8 square drive tool that easily centers the drive rod, and four top rods (4, 5.4 , 6.2, 7.5 ) to make your work fast and efficient.
- [Easy to Store] The harmonic damper pulley puller kit includes a high-quality storage box with handles and pins for safe storage, convenient transportation, and organization.
- [Widely Applicable]Our harmonic shock pulley puller kit is suitable for balancers of various domestic and imported vehicles, and is compatible with many sedans, SUVs, box trucks, and pickup trucks.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #16
10PCS Window Regulator Roller Clips Compatible with Ford Mustang Falcon F-Series Truck Fairlane Thunderbird Mercury Comet C0AB-6423240-B
Asin: B0C98SM7R2
High Quality: The Use Of High-Quality Materials, Long Service Life, Delicate And Small, Easy To Carry..
Packing Quantity: 10 Pcs, Material: Rubber + Steel.
Replaces Part Number: C0ab-6423240-B.
Size: (Lxw) Approx 0.73"X0.53", Can Be Replaced At Any Time..
Features
- Compatible With Ford Falcon 1960-1965; Mercury Comet 1960-1965; Ford Fairlane 1960-1965; Ford Truck 1961-1972; Ford Bronco 1966-1977; Ford Mustang 1965-1968; Ford Thunderbird 1961-1966.
- Size: (LxW) approx 0.73x0.53, Can be replaced at any time.
- High Quality: The use of high-quality materials, long service life, Delicate and small, Easy to carry.
- Replaces part number: C0AB-6423240-B
- Packing Quantity: 10 PCS, Material: Rubber + Steel
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
See On Amazon #17
UZZH Car Transmission Dipstick, CVT Transmission Fluid Dipstick Replacement OEM#31086-JA00A, Transmission Fluid Oil Level Indicator Gauge for Nissan Rogue Maxima Murano Altima Quest Roque
Asin: B0CWRD51B8 | Model: UZZH-Auto10 | PartNumber: UZZH-Auto10
【Replacement Part Number】: Transmission Dip Stick Replacement Parts Oem#31086-Ja00a, 31086-Ja000, Please Confirm Whether This Model Matches Your Car Before Purchasing..
【Easy To Use】: Very Simple To Use, No Auxiliary Tools Required, Just Insert The Engine Oil Dipstick Into The Transmission Oil Tank And Take It Out To Read The Oil Level. (Note: Please Make Sure To Measure One Hour After The Vehicle Turns Off The Engine)..
【High Quality Material】: The Automatic Transmission Oil Dipstick Is Made Of High Quality Stainless Steel Material, With Reliable Quality And Excellent Performance. It Won't Rust Or Corrode And Supports Long-Term Repeated Use..
【Accurate Measurement】: The Cvt Transmission Fluid Dip Stick Can Provide You With Accurate And Reliable Transmission Oil Level To Avoid The Transmission Overheating Caused By Dirty Oil In The Cvt Or Low Fluid Level. Keep Your Car In The Best Condition At All Times And Effectively Extend The Service Life Of The Automatic Transmission..
Features
- Applicable Models : Car transmission dipstick compatible with Jatco automatic transmissions used in 2006 and up. Compatible with Nissan Altima 2007-2020 | Rogue 2013-2022 | Maxima Murano 2006-2022 | Quest | CVT2 | CVT3 | Murano CVT8.
- Accurate Measurement : The cvt transmission fluid dip stick can provide you with accurate and reliable transmission oil level to avoid the transmission overheating caused by dirty oil in the CVT or low fluid level. Keep your car in the best condition at all times and effectively extend the service life of the automatic transmission.
- Replacement Part Number : Transmission dip stick replacement parts OEM#31086-JA00A, 31086-JA000, please confirm whether this model matches your car before purchasing.
- High Quality Material : The automatic transmission oil dipstick is made of high quality stainless steel material, with reliable quality and excellent performance. It won't rust or corrode and supports long-term repeated use.
- Easy to Use : Very simple to use, no auxiliary tools required, just insert the engine oil dipstick into the transmission oil tank and take it out to read the oil level. (Note: Please make sure to measure one hour after the vehicle turns off the engine).
- See more on Amazon...
Brand: UZZH | Manufacturer: UZZH
Dimensions: 1.16 x 23.60 x 0.76 inches | Weight: 0.26 pounds
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #18
Steel DN Mate 120 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8" Deck Railing Kit, Cable Railing Hardware, DIY Baluster Hardware, Wrench Included DM60
Asin: B09M2V2VX3 | Model: DM60 | PartNumber: DM60
Length Of Cable Should Be 1-1/2" Shorter Than Wood Surface Distance（As Shown In Pic.4); If You Want To Diy A High Quality Cable Railing System, Standard 1/8" (Od) Cable Which Was Made Of T316-Stainless Steel Is Recommended..
We Suggest The Following Items For A Cost-Effective Cable Railing System: 1/8" Lag Screw Dm60, 1/8" Steel Cable And Cutter Dw40, Hydraulic Crimper Dc01. Drill Guide Dg12 Can Help You With Drilling. You Can Scroll Down This Page To Get Them, Or Find Them By Search On Amazon, Steel Dn Mate+ Model Number, Like Steel Dn Mate Dw40. We Offer Perfect Free Design Before Sales, And 10 Years Warranty And Lifetime After Sales, Any Question Just Contact Us..
By The Design Of Right&Left Handed Thread, Of Course It Can Be Used To Adjust The Tension Of Attached Cable, So The Turnbuckles Are Not Needed In The Railing System. And This Cable Railing Won’T Be Easily Unfixed Or Destroyeded. The Lag Screws Could Be Drilled Into Wood To Adjust The Tightness Without Extra Turnbuckle Or Tensioner. Deck And Stair Cable Railing System Is Not Only Simple But Also Won't Block Your View..
This Deck Railing Hardware Fit 1/8" Od Cable Of Railing System. The Thread Screws Are Designed For Timber/Wood Post. It Will Rotate The Wire Rope In The Same Direction, Which Resolves The Problem Of Twisting The Attached Wire. Products Without Left & Right Will Bring You Hassle And Might Damage The Cable..
Features
- New deck railing design, clean and elegant. This cable railing kit includes 60 pcs left, 60 pcs right hand thread lag screws, 1 patent design wrench and 2 drill bit. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier.
- This deck railing hardware fit 1/8 OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable.
- Length of cable should be 1-1/2 shorter than wood surface distance as shown in pic.4); if you want to DIY a high quality cable railing system, standard 1/8 (OD) cable which was made of T316-stainless steel is recommended.
- By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won t be easily unfixed or destroyeded. The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view.
- We suggest the following items for a cost-effective cable railing system: 1/8 lag screw DM60, 1/8 steel cable and cutter DW40, hydraulic Crimper DC01. Drill guide DG12 can help you with drilling. You can scroll down this page to get them, or find them by search on amazon, steel dn mate+ model number, like steel dn mate DW40. We offer perfect free design before sales, and 10 years warranty and lifetime after sales, any question just contact us.
- See more on Amazon...
Brand: Steel DN Mate | Manufacturer: Steel DN Mate
Weight: 1.00 pounds
See On Amazon #19
bylikeho 4PCS Coil Spring Spacer,Coil Spring Compressor,Automotive Tool Coil Spring Compressor Tool,Car Accessories 2-Way Adjustable Lift Or Lower Spring Spacer,Coil Spring Struts Tool for Car Truck
Asin: B0CWKMR485 | Model: 1362LXTHYSGJ001 | PartNumber: 1362LXTHYSGJ001
[Adjustable] The Spiral Spring Pillar Is Adjustable, And The Spring Washer Can Support Unfolding And Compression. Bidirectional Adjustable Lifting (1 "To 2") ..
[Widely Used] Compression Coil Springs Are Suitable For Automobiles, Trucks, Motorcycles, And Other Applications..
[Easy To Use] By Rotating The Nut To Expand Or Compress The Coil Spring, The Double Saddle Keeps The Coil Spring In The Correct Alignment Position, Providing Additional Clearance When Adding Larger Tires. You Only Need A Wrench To Easily Adjust The Coil Spring, And The Operation Is Simple And Fast. Installed Firmly And Will Not Move..
[High Quality Materials]This Bi-Directional Adjustable Spring Washer Is Made Of Carbon Steel Material, Which Is Not Easy To Deform And Bend. It Has A Rust And Corrosion Resistant Structure, Durability, And High Strength, Ensuring A Smoother And Safer Driving Experience..
Features
- [Practical Accessories] This kit includes a total of 4 spring adjusters. If you want to lower or raise all 4 coil springs, you will need 8. Please confirm if the product is suitable before purchasing.
- [High Quality Materials]This bi-directional adjustable spring washer is made of carbon steel material, which is not easy to deform and bend. It has a rust and corrosion resistant structure, durability, and high strength, ensuring a smoother and safer driving experience.
- [Adjustable] The spiral spring pillar is adjustable, and the spring washer can support unfolding and compression. Bidirectional adjustable lifting (1 to 2) .
- [Easy to Use] By rotating the nut to expand or compress the coil spring, the double saddle keeps the coil spring in the correct alignment position, providing additional clearance when adding larger tires. You only need a wrench to easily adjust the coil spring, and the operation is simple and fast. Installed firmly and will not move.
- [Widely Used] Compression coil springs are suitable for automobiles, trucks, motorcycles, and other applications.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon
Looking For Something Else?
Search