5PCS NTC 10k Thermistor Temperature Sensor Probe 1 Meter Waterproof Temp Sensor Probe, Stainless Steel 3950 NTC Temp Sensor Probe, Digital Temperature Transmitter Extension Cable
Asin: B0CHP71Q1K
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Ntc Thermistor And Connected By Pvc Wire, 1 Meter Lead Length (3.28Ft), Available For Remote Temperate Measuring And Controlling..
Packing List: 5Pcs Ntc Thermistor 10K Length 1 M (3.3 Ft).
This Multifunctional Test Probes Can Be Used In Household Air Conditioner, Refrigerator, Water Fountain, Drying Box, Constant Box, Etc..
This Temperature Sensor For Car Has 5*25Mm Stainless Steel Housing, Which Is Waterproof, Moisture-Proof And Anti-Rust..
Features
- The NTC temperature probe is able to tolerate the widest measuring range (-30 c to 130 c (-22 to 266 )
- This temperature sensor for car has 5*25mm stainless steel housing, which is waterproof, moisture-proof and anti-rust.
- NTC thermistor and connected by PVC wire, 1 meter lead length (3.28ft), available for remote temperate measuring and controlling.
- This multifunctional test probes can be used in household air conditioner, refrigerator, water fountain, drying box, constant box, etc.
- Packing List: 5PCS NTC Thermistor 10K Length 1 m (3.3 ft)
- See more on Amazon...
Brand: Euogeudel | Manufacturer: Esedese
See On Amazon Similar To 5PCS NTC 10k Thermistor Temperature
#1
Creality Original 3D Printer NTC100K Thermistor Temp Sensor 5 Pack Quick Replacement Single Ended Glass Sealed for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer(30cm/11.8inch)
Asin: B0BJJQGC17 | Model: 3D-Thermistor-5P | PartNumber: 3D-Thermistor-5P
🌡【Single-Ended Glass Sealed】The Glass Material Used In The Package Ensures The Maximum Service Life With Precision Temperature Measurement, Resistance To High Temperatures, And Fast Temperature Conduction..
🌡【Official Creality 3D Store】Official Creality 3D Store! We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🌡【Easy To Install】Only 4 Steps To Install, No Need To Disassemble The Motherboard And Wire Harness, Fast Wiring Just Replace The Thermistor Directly. There Is A Tin Ring Inside, Waterproof Hot Melt Glue, No Welding, Sealing And Waterproof, Anti-Leakage, High-Temperature Resistance..
🌡【The Temperature Measurement】 -30 °C ~ +300 °C, Can Replace The Original Creality 3D Printer Nct Thermistor. Fit For Printing High-Temperature Filament..
Features
- Upgrade NTC Thermistor 100% Official Creality 3D Printer thermistor used for hotbed or hotend. Single-ended glass sealed temperature measurement. Compatible with Ender 3 series, Ender 5 series, Ender-6, and part of CR 10 series.
- The Temperature Measurement -30 C ~ +300 C, can replace the original Creality 3D Printer NCT thermistor. Fit for printing high-temperature filament.
- Single-ended Glass Sealed The glass material used in the package ensures the maximum service life with precision temperature measurement, resistance to high temperatures, and fast temperature conduction.
- Easy to Install Only 4 steps to install, no need to disassemble the motherboard and wire harness, fast wiring just replace the thermistor directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance.
- Official Creality 3D Store Official Creality 3D Store! We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
5PCS Creality 3D Printer NTC Thermistor 100K, NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 3 Max/Voxelab Aquila, XH2.54-2P Connector (1.3m/51.1inch)
Asin: B0714MR5BC | Model: 3D-RMDZ-5PCS | PartNumber: 3D-RMDZ-5PCS | Ean: 0649910034431 | UPC: 649910034431
Ntc Thermistor: Used For Heated Bed Or Hot End. Our Ender 3 Pro Thermistor Replacement Is Compatible With Most 3D Printers..
After-Sales Service: If You Have Any Unsolvable Problems While Using The Ender 3 Thermistor Replacement, Please Feel Free To Contact Us. Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Long Life Service: High Precision, High Sensitivity, And Fast Temperature Conduction, High-Temperature Resistance..
Note Before Buying: Our Ender 3 Thermistor Is Not Fit For Ender 3 V2/Ender 3S/Cr-10S Pro V2/Cr-10S Pro/Ender 2 Pro/Ender 6/Prusa I3 3D Printer. Please Measure The Length Of Your 3D Printer's Thermistor And Confirm Whether This Thermistor Is Compatible With Yours Before Buying..
Features
- Wire Length: 51.1inch /1.3m. The package includes 5 3D printer thermistors. 2-pin XH2.54 female connector.
- Note Before Buying: Our Ender 3 thermistor is not fit for Ender 3 V2/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3D printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
- NTC Thermistor: Used for heated bed or hot end. Our Ender 3 pro thermistor replacement is compatible with most 3D printers.
- Long Life Service: High precision, high sensitivity, and fast temperature conduction, high-temperature resistance.
- After-sales Service: If you have any unsolvable problems while using the Ender 3 thermistor replacement, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Comgrow
See On Amazon #3
DROK 10K Temperature Sensor Probe, 5pcs 1 Meter Waterproof Temp Sensor Probe, Stainless Steel 3950 NTC Temp Sensor Probe, Digital Temperature Transmitter Extension Cable
Asin: B01MR37GOQ | Model: 300457 | PartNumber: 300457
Stainless Steel Probe: This Temperature Sensor For Car Has 5*25Mm Stainless Steel Housing, Which Is Waterproof, Moisture-Proof And Anti-Rust..
Applicable Voltage Range: 3-5V. Applicable Current Range: 0-10 Ma..
Wide Application: This Multifunctional Test Probes Can Be Used In Household Air Conditioner, Refrigerator, Water Fountain, Drying Box, Constant Box, Etc..
Wide Measuring Range: Our Temperature Probe Is Able To Tolerate The Widest Measuring Range (-25°C To 125°C (-13℉ To 257℉))..
Features
- Advanced Technology: DROK smart sensors cable adopts sensitive and reliable NTC thermistor and connected by PVC wire, 1 meter lead length (3.28ft), available for remote temperate measuring and controlling.
- Wide Measuring Range: Our temperature probe is able to tolerate the widest measuring range (-25 c to 125 c (-13 to 257 )).
- Stainless Steel Probe: This temperature sensor for car has 5*25mm stainless steel housing, which is waterproof, moisture-proof and anti-rust.
- Wide Application: This multifunctional test probes can be used in household air conditioner, refrigerator, water fountain, drying box, constant box, etc.
- Applicable Voltage Range: 3-5V. Applicable Current Range: 0-10 mA.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #4
5Aplusreprap Ender 3 Hotend Upgrade - M3 Stud Thermistor,Fast Replaced, Compatible for Creality Ender 3 V2/Pro,CR-10 J-Head Hotend Replacement, Assembled Extruder 3D Printer Hot end Kit 24V 40W
Asin: B09QMBMB6S | Model: HTK-24V50W-1set | PartNumber: HTK-24V50W-1set
Advantages: Heater Wire And Thermistor Wire Are With Fast Replace Plug Connectors,Easier To Fast Replace Or Remove The Hotend In Any Cases. Heated Block Was Staby To The Heatsink With The Titanium Alloy Screw,Which Thermal Conductivity Is Lower Than Stainless Steel Screw, Therefore Less Heat Is Conducted To The Heat Sink..
Tips: It Is Suggested To Re-Check The Heatbed Level After Install The New Hotend Or Nozzle, To Avoid The Nozzle Scratch Heatbed. Screw This Termistor In The Heated Block By Hand, Not By Tool..
Compatible With 3D Printer Models: Creality Cr-10, Creality Cr-10-S5, Creality Cr-10-S4, Creality Cr-10S, Creality Cr-10 Mini, Creality Cr-20, Creality Cr-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Xy X5s, Tevo Tornado, Alfawise U20, Lotmaxx Sc-10, Etc..
Staby Temperature Sensor: Different From Other Hotends, This Hotend Uses An Upgraded M3 Stud Ntc 100K Thermistor, Which Better Keeps The Thermistor Firmly Fixed To The Heated Block While Printhead Is Moving. Thermistor Was Sealed With High Temperature Glue And Insulation With Fiberglass, To Ensure More Effective Temperature Resistance To Prevent Short Circuit At 250℃ Temperature..
Features
- Package Includes: 1 x Ender 3 Hotend, CR10 J-head Hotend kit with M3 stud-in NTC 3950 100K Thermistor and 24v 40w heater wire, 5 x 0.4mm brass nozzle, 3 x ender heated block silicone case, 2 x aluminum heated block, 1 x wrench tool.
- Staby Temperature Sensor: Different from other hotends, this hotend uses an upgraded M3 stud NTC 100K thermistor, which better keeps the thermistor firmly fixed to the heated block while printhead is moving. Thermistor was sealed with high temperature glue and insulation with fiberglass, to ensure more effective temperature resistance to prevent short circuit at 250 temperature.
- Advantages: Heater wire and thermistor wire are with fast replace plug connectors,easier to fast replace or remove the hotend in any cases. Heated block was staby to the heatsink with the titanium alloy screw,which thermal conductivity is lower than stainless steel screw, therefore less heat is conducted to the heat sink.
- Compatible with 3D Printer Models: Creality CR-10, Creality CR-10-S5, Creality CR-10-S4, Creality CR-10S, Creality CR-10 MINI, Creality CR-20, Creality CR-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, XY X5S, Tevo Tornado, Alfawise U20, Lotmaxx SC-10, etc.
- Tips: It is suggested to re-check the heatbed level after install the new hotend or nozzle, to avoid the nozzle scratch heatbed. Screw this termistor in the heated block by hand, not by tool.
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
Dimensions: 1.20 x 3.50 x 5.20 inches | Weight: 0.28 pounds
See On Amazon #5
WINSINN HT-NTC100K Thermistor Sensor, Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin, Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend (Pack of 5Pcs)
Asin: B07F3SMRLJ | Ean: 0686603769546 | UPC: 686603769546
✔️Adopts 304 Stainless Steel, With The Internal Temperature Package To Ensure The Maximum Service Life With Precision Temperature Measurement..
✔️Made By Winsinn. Can Be Used With The New Sensor Heater Block (Temperature Measurement Can Be Up To 350 Degrees)..
✔️Ht-Ntc100k Thermistor Adopts White High-Temperature Cord, Can Bear Higher Temperature. And For Customers' Convenience, The Wires Adopts Line Connection, The Customer Can Tear The Wires Depends On Their Application. The High Temperature Line Is Double Thicker Than Others In The Market, Not Easy To Break Off..
✔️The Temperature Measurement: -50 °C ~ +350 °C, Can Replace The Original K-Type Thermocouple Temperature. Fit For Printing High-Temperature Filament..
Features
- Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
- The temperature measurement: -50 C ~ +350 C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
See On Amazon #6
HICTOP Ender 3 Thermistor 1.2m/47.2 Inches NTC 3950 100k Thermistor Temp Sensor for Reprap Creality Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 Max,CR-10 10S,Prusa i3, 3D Printer 2Pin XH2.54 (Pack of 5)
Asin: B097SSXSX6 | Model: HIC-002 | PartNumber: HIC-002 | Ean: 0602309981952 | UPC: 602309981952
There Is A 2 Pin Female Connector On The Thermistor For 3D Printer.
Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%.
Wire Length For The 100K Thermistor 3D Printer: 1.2M/47.2 Inches..
Ender 3 Thermistor Is Compatible With Most 3D Printers In The Market Such As Ender3,Ender3 Pro,Ender3 V2,Ender 3 Neo,Ender 3 Max,Cr-10S Pro V2,Cr-10S Pro,Ender 2 Pro,Ender 6,Prusa I3,Cr-10,Hictop D3 Hero,Voxelab Aquila Etc. 3D Printers.
Features
- HICTOP 3d printer thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers
- Ender 3 thermistor is compatible with most 3D printers in the market such as ender3,ender3 pro,ender3 V2,Ender 3 Neo,Ender 3 Max,CR-10S Pro V2,CR-10S Pro,Ender 2 Pro,Ender 6,Prusa i3,CR-10,hictop d3 hero,Voxelab Aquila etc. 3D printers
- There is a 2 pin female connector on the thermistor for 3D printer
- Wire length for the 100K thermistor 3d printer: 1.2m/47.2 inches.
- Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%
- See more on Amazon...
Brand: HICTOP | Manufacturer: HIC Technology
Dimensions: 3.54 x 4.33 x 0.79 inches
See On Amazon #7
Genuine E3D Hotend Thermistor Cartridge Replacement
Asin: B072HNL9MR | Ean: 0814358015148, 0612520712068 | UPC: 612520712068, 814358015148
Genuine Semitec 104Gt Thermistors Used..
Comes With (1) Hotend Thermistor With Attached Connector And (1) Connector Cable Measuring 40 Inches (101Cm).
A Custom Made Thermistor Encapsulated Into An Easy To Use Cartridge Package..
Features
- Direct replacement of cartridge type thermistor in E3D hotends.
- A custom made thermistor encapsulated into an easy to use cartridge package.
- Genuine Semitec 104GT thermistors used.
- Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)
- See more on Amazon...
Brand: E3D | Manufacturer: E3D
Dimensions: 0.50 x 3.00 x 2.00 inches
See On Amazon #8
Creality Spider 3.0 High Temperature and High Flow Hotend Pro, All Metal Hotend Upgrade for Ender 3 Pro, Ender 3, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Pro, Ender-5 Plus, CR 10
Asin: B0BGNZ73ZQ | Model: Spider High Temp High Flow Hotend Pro | PartNumber: Spider High Temp High Flow Hotend Pro | Ean: 0749355988662 | UPC: 749355988662
【Supporting 300Mm/S High-Speed Printing】The High-Temp Heat-Resistant Insulation Sheet Is Added To Maintain The Temp Of The Melting Zone, Supporting 300Mm/S High-Speed Printing.The Titanium Alloy Screws Were Used To Reduce The Thermal Conductivity By 30%, Which Can Reduce The Transfer Of Heat From The Hating Zone To The Heat Dissipation Zone And Ensure The Smooth Feeding. Meanwhile, Red Copper Heat Sink To Improve Heat Dissipation Efficiency..
【Product List & Warranty Policy】This Kit Comes With A Spider Hotend, A Thermistor, A Copper Tube, A Thermal Grease, An Adaptor, Silicone Sock, Wrenches And Screws. We Provide Price Protection Service, Within 15 Days Of Your Purchase, If You Find The Price Has Dropped, You Can Apply To Make Up The Difference. During Use, If You Have Any Question, Please Contact Us And We Weill Reply You Within 24 Hours..
【Easy To Install, Wide Compatibility】Small And Exquisite External Size With Modular Standard Interface Design, Easy To Install. Directly Compatible With Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max, No Modification Required. You Can Find The Their High-Temperature Firmware On Creality Website. For Ender 5/Ender 5 Pro/Ender5 Plus/Ender2 Pro/Cr 10S/Cr 10/Cr10 S5/Cr10 S4/Cr 10Mini/Cr 20 Pro, They Require Slight Modification. Please Note: Not Compatiable With Ender 3 Neo/Ender3 V2 Neo/Ender3 Max Neo..
【Large Melting Zone, High-Flow Printing】The Overall Melting Zone Length Is 27.3Mm, Increased By 30% Compared With Spider Hotend V1.0 And Other Common Hotends, Which Offer A Smooth Printing Experience Even With 0.8Mm Nozzle. Meanwhile, The Inner Wall Of Nozzle And Heat Block Adopt Fluid Polishing Process, Ra≤0.25, Greatly Enhance Fluidity Of Filament And Prevent Clogs..
Features
- All Metal Design, Up to 300 Printing With scientific structure and material selection, the Spider 3.0 Pro All Metal Hotend Upgrade Kit can reach 300 to accomplish better effect of printing with high temperature filaments. It is compatible with PLA, ABS, PETG, TPU, PP, PC, PEEK, PEI, Nylon and more filament.
- Large Melting Zone, High-Flow Printing The overall melting zone length is 27.3mm, increased by 30% compared with spider hotend v1.0 and other common hotends, which offer a smooth printing experience even with 0.8mm nozzle. Meanwhile, the inner wall of nozzle and heat block adopt fluid polishing process, Ra 0.25, greatly enhance fluidity of filament and prevent clogs.
- Supporting 300mm/s High-Speed Printing The high-temp heat-resistant insulation sheet is added to maintain the temp of the melting zone, supporting 300mm/s high-speed printing.The titanium alloy screws were used to reduce the thermal conductivity by 30%, which can reduce the transfer of heat from the hating zone to the heat dissipation zone and ensure the smooth feeding. Meanwhile, red copper heat sink to improve heat dissipation efficiency.
- Easy to Install, Wide Compatibility Small and exquisite external size with modular standard interface design, easy to install. Directly compatible with Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max, no modification required. You can find the their high-temperature firmware on Creality website. For Ender 5/Ender 5 Pro/Ender5 Plus/Ender2 Pro/CR 10S/CR 10/CR10 S5/CR10 S4/CR 10Mini/CR 20 Pro, they require slight modification. PLEASE NOTE: NOT COMPATIABLE WITH ENDER 3 NEO/ENDER3 V2 NEO/ENDER3 MAX NEO.
- Product List & Warranty Policy This kit comes with a Spider hotend, a thermistor, a copper tube, a thermal grease, an adaptor, silicone sock, wrenches and screws. We provide price protection service, within 15 days of your purchase, if you find the price has dropped, you can apply to make up the difference. During use, if you have any question, please contact us and we weill reply you within 24 hours.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: yoopai
See On Amazon #9
Prusa Specific Thermistor (MK2, MK3) (PRUSA-THERMISTOR)
Asin: B07TYGYWRG | Model: PRUSA-THERMISTOR | PartNumber: PRUSA-THERMISTOR
A Custom Made Thermistor Encapsulated Into An Easy To Use Cartridge Package..
Features
- Genuine E3D Parts
- A custom made thermistor encapsulated into an easy to use cartridge package.
- See more on Amazon...
Brand: E3D | Manufacturer: E3D
See On Amazon #10
Official Creality Original Ender 3 S1 Thermistor Sensor 5 Pack, NTC100K 3950K 3D Printer Hotend Replacement Parts Thermistor Temp Sensor Compatible with Sprite Extruder Heater Block
Asin: B09QPH3HMR | Model: HB TH 3S1 | PartNumber: HB TH 3S1
Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%.
Designed For Sprite Extruder Standard Kit 260°C, Compatible With Fdm 3D Printer Equipped With Sprite Extruder, Like Ender 3 S1, Ender3 S1 Plus 3D Printer..
There Is A 2-Pin Female Connector On The Thermistor For 3D Printer Sprite Extruder..
The Thermistor Head Size: Φ3x5.5Mm; Cable Length: About 35Mm/ 1.37 Inch..
Features
- 100% Creality Official. Package Include: 5Pcs thermistors.
- The thermistor head size: 3X5.5mm; Cable length: about 35mm/ 1.37 Inch.
- Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%
- There is a 2-Pin female connector on the thermistor for 3D printer sprite extruder.
- Designed for Sprite Extruder Standard kit 260 C, Compatible with FDM 3D printer equipped with sprite extruder, like Ender 3 S1, Ender3 S1 Plus 3D Printer.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #11
Creality Original Ender 5 Hotend Kit for 24V Ender-5 3D Printer Extruder Head with Silicone Cover Aluminum Heat Block Assembled
Asin: B07WRKJG9N | Ean: 0705300791480 | UPC: 705300791480
Operating Temperature Range： -40 ~ +260°C (-40 ~ +500 °F).
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Suitable For Creality Ender 5 3D Printer..
Features
- It's 100% Creality Original.
- Suitable for Creality Ender 5 3d printer.
- Operating temperature range -40 ~ +260 C (-40 ~ +500 F)
- MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #12
4Pcs Ender 3 v2 Thermistor 1m/39.4Inches, 3D Printer 100K ohm NTC 3950 Thermistor Temp Sensor Compatible for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 5/Voxelab Aquila, 2Pin XH2.54,
Asin: B0CM3FSFF9
This 3D Printer Ohm 100K Ntc Thermistor Compatible For Ender 3 /Ender 3 Pro/Ender 5/Ender 5 Plus/Voxelab Aquila/Cr10/Elegoo Neptune 3, Direct Replacement For Sovol Sv1 Bed Thermistor, Etc..
100K Ohm Ntc 3950 Thermistor Used For 3D Printer Heated Bed Or 3D Printer Hotend. Such As: Ender 3 Hotend, Cr10 Hotend,3D Printer Extruder J-Head Hotend,Etc..
They Are Perfect For The 3D Printer(Ender 3 V2/Ender 3 Pro/Ender 3 Max), But The 1M Wires Are A Bit Short ; So You Need Had To Cut The Thermistor Off And Splice It In And Tape The Splices. Plug And Play With Lerdge K Board For Diy Printer..
Recommended Parameters For The 3D Printer Thermistor: R25℃=100K B25/50=3950K± 1%; Connector : 2Pin Xh2.54..
Features
- Package includes: 4Pcs 1m/39.4 Inches 3D Printer ohm NTC 100K 3950 Thermistor Sensors;
- Recommended parameters for the 3D Printer Thermistor: R25 =100K B25/50=3950K 1%; Connector : 2pin XH2.54.
- This 3D Printer ohm 100k ntc Thermistor Compatible for Ender 3 /Ender 3 Pro/Ender 5/Ender 5 Plus/Voxelab Aquila/CR10/Elegoo Neptune 3, Direct replacement for Sovol SV1 bed thermistor, etc.
- They are Perfect for the 3d printer(Ender 3 V2/Ender 3 Pro/Ender 3 max), but the 1m wires are a bit short ; so you need had to cut the thermistor off and splice it in and tape the splices. Plug and play with Lerdge K board for DIY printer.
- 100K ohm NTC 3950 Thermistor Used for 3D Printer Heated Bed or 3D Printer Hotend. such as: Ender 3 Hotend, CR10 Hotend,3D Printer Extruder J-Head Hotend,etc.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon #13
TWTADE 2 Pcs 3M 10K B3950 Thermistor Temperature Sensor,able to Support -25 to 125 Degree Celsius,Sensitive NTC Temperature Sensor Probeprobes has 5 * 25mm Stainless Steel housing NTC-3M-2P
Asin: B086YD9L28 | Model: NTC-3M-2P | PartNumber: NTC-3M-2P | Ean: 0747966685864 | UPC: 747966685864
Wide Application: This Multifunctional Test Probe Can Be Used In Household Air Conditioner, Refrigerator, Water Fountain, Drying Box, Constant Box, Etc..
Package Content：2 X 3 Meter Temperature Sensor.
100% Brand-New Products Are Guaranteed For Two Years. If Quality Problems Are Found During The Guarantee Period, Please Contact Us By Email And We Will Replace Them For Free..
Product Specification : The Line Is Three Meter Long.This Temperature Test Probe Has 5*25Mm Stainless Steel Housing And Able To Tolerate The Widest Measuring Range (-25°C To 125°C (-13℉ To 257℉)..
Features
- Product name : Temperature Sensor
- Product specification : The line is three meter long.This temperature test probe has 5*25mm stainless steel housing and able to tolerate the widest measuring range (-25 c to 125 c (-13 to 257 ).
- Wide Application: This multifunctional test probe can be used in household air conditioner, refrigerator, water fountain, drying box, constant box, etc.
- 100% brand-new products are guaranteed for two years. If quality problems are found during the guarantee period, please contact us by email and we will replace them for free.
- Package content 2 x 3 meter Temperature Sensor
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon #14
Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend (100K 3950)
Asin: B08YNX79H8 | Model: m3 screw in fixing thermistor | PartNumber: m3 screw in fixing thermistor | Ean: 0791548327406 | UPC: 791548327406
Package: 1Piece M3 Screw In Thermistor.
For The Printer Which Uses Ntc 100K 3950 Thermistor, Then This Thermistor Is Plug And Use.
Thermistor Model: Ntc 100K 3950. Here Is The Firmware Setting: *13:100K Hisens 3950 1% Up To 300°C For Hotend "Simple One " &"Hotend "All In One" #Define Temp_Sensor_0 13.
Diy Players Can Also Modify Block By Themselves. Make An M3 Threaded Hole In Blcok, Then You Can Use This Thermistor.
Features
- M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span
- DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor
- Package: 1piece m3 screw in thermistor
- Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300 C for hotend Simple ONE &Hotend All In ONE #define TEMP_SENSOR_0 13
- For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #15
HysiPrui 2pcs 3D Printer Accessories NTC 100K Thermistor Temp Sensor and 2pcs Cartridge Heater, Hotend Quick Replacement Parts, for 3D Printer Bambu Lab X1/X1-Carbon
Asin: B0CN6DDK4B
【High Quality 3D Printer Accessories】: The 3D Printer Thermistor And Cartridge Heater Are Processed By Cnc Machine Tool With High Precision And Stable Performance. It Has Been Tested To Be Fully Suitable For High Temperature Printing, Withstanding A Maximum Temperature Of Up To 450°C. It Also Works Perfectly With Daily Filaments Such As Pla, Abs, Tpu, Petg, And So On..
【Easy Installation】: No Need To Disassemble The Motherboard And Wiring Harness, Directly Replace The Thermistor Or Cartridge Heater To Quickly Wire. Inside The Tin Ring, Waterproof Hot Melt Adhesive, No Need To Weld, Sealed Waterproof, Anti-Leakage, High Temperature Resistance..
【What You Get】: Package Includes 2Pcs 3D Printer Thermistors, 2-Pin Xh2.54 Connector, And 2Pcs Cartridge Heater. Insulated With High Temperature Resistant 450 Degree Celsius Fiberglass To Avoid The Possibility Of Thermal Short-Circuiting When Working At High Temperature, Thus Prolonging The Service Life..
【Stable And Durable】: Thermistor And Cartridge Heater, Special Designed For 3D Printer, High Temperature Resistant, Durable, Longer Service Life. High Precision, High Sensitivity, Fast Temperature Conduction, High Temperature Resistance..
Features
- Compatible 3D Printers : The 2 packs NTC 100k thermistor temp sensors and 2 packs cartridge heater are compatible with Bambu Lab X1/X1-Carbon 3d printers, please confirm your 3d printer model before ordering.
- Stable and Durable : Thermistor and cartridge heater, special designed for 3d printer, high temperature resistant, durable, longer service life. High precision, high sensitivity, fast temperature conduction, high temperature resistance.
- High Quality 3D Printer Accessories : The 3d printer thermistor and cartridge heater are processed by CNC machine tool with high precision and stable performance. It has been tested to be fully suitable for high temperature printing, withstanding a maximum temperature of up to 450 C. It also works perfectly with daily filaments such as PLA, ABS, TPU, PETG, and so on.
- What You Get : Package includes 2pcs 3D printer thermistors, 2-pin XH2.54 connector, and 2pcs cartridge heater. Insulated with high temperature resistant 450 degree Celsius fiberglass to avoid the possibility of thermal short-circuiting when working at high temperature, thus prolonging the service life.
- Easy Installation : No need to disassemble the motherboard and wiring harness, directly replace the thermistor or cartridge heater to quickly wire. Inside the tin ring, waterproof hot melt adhesive, no need to weld, sealed waterproof, anti-leakage, high temperature resistance.
- See more on Amazon...
Brand: HysiPrui | Manufacturer: HysiPrui
See On Amazon #16
Ametherm SL32 1R030 (Pack of 2) NTC Thermistor, SG379 HVAC, Inrush Current Limiter 1 Ohm Ohm 20% 1.18" (30mm)
Asin: B071D326TB | Model: SL32 1R030 (Pack of 2) | PartNumber: SL32 1R030 (Pack of 2) | Ean: 0722076437954 | UPC: 722076437954
Brand: Ametherm | Manufacturer: Ametherm
Weight: 0.19 pounds
See On Amazon #17
24V Ceramic Heater Thermistor with 1pc Fixing Clip Compatible with BB X1 Carbon X1-Carbon Combo 3D Printer Hotend (Heater thermistor)
Asin: B0BW3WXVNR | Model: X1 heater thermistor | PartNumber: X1 heater thermistor
A Fixing Clip Will Come With This Pack..
Package: 1Pc Ceramic Heater, 1Pc Thermistor, And 1Pc Fixing Clip.
Compatible With Bb X1, X1-Carbon, X1 Carbon Combo 3D Printer Hotend.
Parameters Of Thermistor: Max Temperature Can Sense 300℃; Diameter: 1.3Mm ; The Medium Length Is 95Mm.
Features
- Parameters of heater: Heating temperature : 300 ; Heating power: 48W; Voltage : 24V, The medium length is 120mm
- Parameters of thermistor: max temperature can sense 300 ; Diameter: 1.3mm ; The medium length is 95mm
- A fixing clip will come with this pack.
- Compatible with BB X1, X1-Carbon, X1 carbon Combo 3D Printer Hotend
- Package: 1pc ceramic heater, 1pc thermistor, and 1pc fixing clip
- See more on Amazon...
Brand: HOCENWAY | Manufacturer: HoCenWay
See On Amazon #18
3D Printer Thermistor 100k NTC 3950, M3 Stud Thermistor 100k ntc 3950 Temperature Sensor with 1 Meter Extended Cable Wire Use for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend,
Asin: B0B7B727KB
Applicated To: Almost All Kind Of Heating Block With M3 Thread Hole..
M3 Stud Thermistor Ntc100k Temperature Sensor Use For Creality Ender 3/ Ender 3 V2 /Ender 3 Pro/Ender 3 V2 /Ender 5 Cr10 Cr10s J-Head Hotend.
Beta Value: Ntc100k 3950 Accuracy: 1%.
Working Temperature:Up To 280 ℃. （Comes With Convenient Short Connection With Longer Cable So It Can Be Disconnected Without Unwiring It Completely. ).
Features
- Item Name: M3 Stud Thermistor NTC100K Temperature Sensor with 1 Meter Extended Cable Wire.
- Working temperature:UP to 280 . Comes with convenient short connection with longer cable so it can be disconnected without unwiring it completely. )
- Applicated to: almost all kind of heating block with M3 thread hole.
- Beta Value: NTC100K 3950 Accuracy: 1%
- M3 Stud Thermistor NTC100K Temperature Sensor use for Creality Ender 3/ Ender 3 v2 /Ender 3 Pro/Ender 3 V2 /Ender 5 CR10 CR10s J-Head Hotend
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
Dimensions: 0.39 x 4.72 x 3.15 Inches
See On Amazon #19
24V 65W Heater Catridge + 300 C NTC 100K 3950 Thermistor Temperature Sensor Compatible with Voron V2.4 V0.1 V1.8 V6 PT100 Dragon Hotend Dragonfly BMS BMO Printhead 3D Printer
Asin: B0B5DRBXZP | Model: 24V 65W heater thermistor | PartNumber: 24V 65W heater thermistor
Specially Designed To Be Compatible With Voron V2.4 V0.1 V1.8 V6 Pt100 Dragon Hotend 3D Printer.
Package: 1Piece Green Heater Tube, 1Piece Thermistor.
Widely Use: This Heater And Thermistor, Also Can Used For Other 3D Printers, But Please Must Change The Connectors If The Connector Is Not Stuibale For Your Printer.
Thermistor: Ntc100k 3950B, Cartridge Size: Od3mm X15mm, Using Imported Chip, Can Work At -40°C ~300°C.
Features
- HEATER: max temperature is 500C degree, 450C Degree Working stably ; Power: 24V 65W, cartridge size: OD6mm x15mm, apply high quality and high temperature green color silicone cable, more dorable and longer lifetime , and using 15mm length stainless steel cover does not interfere with the installation of other accessories like leveling sensor, fan.
- THERMISTOR: NTC100K 3950B, cartridge size: OD3mm x15mm, using imported chip, can work at -40 C ~300 C
- Specially designed to be Compatible with Voron V2.4 V0.1 V1.8 V6 PT100 Dragon Hotend 3D Printer
- Widely USE: This heater and thermistor, also can used for other 3D Printers, but please must change the connectors if the connector is not stuibale for your printer
- Package: 1piece green heater tube, 1piece thermistor
- See more on Amazon...
Brand: HOCENWAY | Manufacturer: HoCenWay
Weight: 0.04 pounds
See On Amazon #20
uxcell 2 Pcs 10K NTC Thermistor Probe 15.7 Inch Epoxy Sensitive Temperature Temp Sensor for Air Conditioner
Asin: B07LGMXTKK | Model: a18112200ux0691 | PartNumber: a18112200ux0691
400Mm(15.7 Inch) Wire Length, Xh2.54-2P Plug.
Widely Application In Temperature Control System: Greenhouse, Aquarium, Etc..
Widely Application For Household Appliances: Air Conditioner, Refrigerator, Freezer, Water Heater, Air Heater, Dishwasher, Dryer,Etc..
Epoxy Waterproof Probe, Fast Temperature Conduction.
Features
- NTC 10K high-accuracy temperature sensor, measuring temperature range: -30 C to +105 C (-22 F to +221 F)
- Epoxy waterproof probe, fast temperature conduction
- 400mm(15.7 inch) wire length, XH2.54-2P plug
- Widely Application for Household Appliances: Air conditioner, refrigerator, freezer, water heater, air heater, dishwasher, dryer,etc.
- Widely Application in Temperature Control System: Greenhouse, aquarium, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 4.72 x 3.15 Inches
See On Amazon
Looking For Something Else?
Search