Carbide Square End Mill - 4 Flute - 1/4"4T (5 Piece, 1/4") - for Milling Alloy Steels, Hardened Steel, Metal & More Mill Bits Sets for DIYers & Professionals
Asin: B0CJ4S28Q2 | Ean: 0761330614045 | UPC: 761330614045
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Lu&Mn End Mill Bits Are Compatible With Most Desktop Cnc Machines, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
General Usage: Applicable With Copper, Copper Alloys, Cast Iron, Steels, Carbon Steels, Alloy Steels, Pre-Hardened Steels, Hardened Steels, And Stainless Steel Materials. Best Use For Materials Hrc Less Than 50..
Material- Solid Carbide With Tialn Coated. Type: 4 Flute With Squre End..
Features
- Size - 1/4 inch shank and 1/4 inch cutting diameter, 3/4 inch cutting Length, 2-1/2 inch for total length
- Material- Solid Carbide with TiAlN Coated. Type: 4 Flute with squre end.
- We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
- LU&MN End mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- See more on Amazon...
Brand: LU&MN | Manufacturer: LU&MN
Dimensions: 0.25 x 2.50 x 0.25 inches | Weight: 0.33 pounds
See On Amazon Similar To Carbide Square End Mill 4
#1
SPEED TIGER Micrograin Carbide Square End Mill - 4 Flute - ISE1/4"4T (5 Pieces, 1/4") - for Milling Alloy Steels, Hardened Steel, Metal & More Mill Bits Sets for DIYers & Professionals
Asin: B07FSGBW7S | Model: ISE1-4-4T | PartNumber: ISE1-4-4T | Ean: 4712805504718
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Altibn Coating - This Coating, Made Of Titanium Aluminum Boron Nitride (Altibn), Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Features
- APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~51), and Cast Iron.
- AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.04 x 2.50 x 0.25 Inches | Weight: 0.29 Pounds
See On Amazon #2
sisona 1/8" 3/16" 1/4" 5/16" 3/8" Carbide End Mills Set - Solid Carbide (Tungsten Carbide + Cobalt) - 5Pcs 4 Fulte CNC Mill Bits for Steel - TISIN Coated
Asin: B0B1HC94QX | Model: 7152202 | PartNumber: 7152202
Wide Compatibility: Sisona End Mill Bits Are Compatible With Most Desktop Cnc Machines, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
Used It Strictly For Steel, It Worked Great For That, Eats Metal Fast ，Beautiful Surface Finish!Watch Your Stick Out And Travel Speeds..
High Quality:Made From Solid Tungsten Carbide (Tc)，Have A Titanium Nitride (Tin) Surface To Improve Heat Resistance And Reduce Wear..
Applicable Materials: Cnc Bits Usually Used For Steel（Carbon Steel/Alloy Steel/Hardened Steel/Cast Lron, Etc.）.
Features
- sisona End Mill Sets -- Cutting Diameter: 1/8 - 3/8 inch 1/8" 3/16" 1/4" 5/16" 3/8" Shank Diameter:1/8 - 3/8 inch 1/8" 3/16" 1/4" 5/16" 3/8" Cutting Length:3/8 - 1 inch 3/8" 5/8" 3/4" 13/16" 1" Overall Length:1-1/2 inch - 2-1/2 inch 1-1/2" 2" 2-1/2" 2-1/2" 2-1/2"
- Applicable Materials: cnc bits usually used for steel Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.
- Wide Compatibility: sisona end mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- High Quality:made from solid tungsten carbide (TC) have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear.
- Used it strictly for steel, it worked great for that, eats metal fast beautiful surface finish!Watch your stick out and travel speeds.
- See more on Amazon...
Brand: sisona | Manufacturer: KEHAOU
See On Amazon #3
10 pcs 4-Flute End Mill Bits, AFUNTA 0.08" - 0.47" HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium
Asin: B07DQL66VF | Model: AF-4-flute_end_mill_10 | PartNumber: AF-4-flute_end_mill_10 | Ean: 0783710282415 | UPC: 783710282415
U-Shaped Groove Design, Large Front Angle Effectively Reduces Cutting Resistance And Sharp, Convenient For Chip Removal, Further Improve Machining Efficiency..
10 Different Kinds Of Size End Mills To Meet Your Need, 2Mm/0.08In,3Mm/0.12In, 4Mm/0.16In, 5Mm/0.2In, 6Mm/0.24In,7Mm/0.27In, 8Mm/0.31In, 9Mm/0.35In,10Mm/0.39In, 12Mm/0.47In.
Materials: High Speed Steel, High Hardness, Good Wear Resistance And Durability..
High Processing Efficiency: The Edge Of End Mill Bits Is Hard And Sharp With Tiain Coating, Process The Heat Treatment Materials With High Speed, Reduce Changing Times And Improve The Production Efficiency..
Features
- APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.
- HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency.
- U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance and sharp, convenient for chip removal, further improve machining efficiency.
- MATERIALS: high speed steel, high hardness, good wear resistance and durability.
- 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in
- See more on Amazon...
Brand: AFUNTA | Manufacturer: AFUNTA
Weight: 0.04 pounds
See On Amazon #4
MNKNENG 8 Set 1/4 inch End Mill Bits 4 Flute Straight Milling Cutter HSS-AL CNC Square Nose End Mill Bits Straight Shank Drill Bits for Wood, Steel, Titanium(6.35mm,4T) 1
Asin: B0822FFX2Q | Ean: 0793740356932 | UPC: 793740356932
Sharp Edge ---- The Design Of 4 Flutes, Sharp Edge, And Superior Wear Resistance At High Cutting Speeds; Durable, High Precision And Not Easy To Break; Easy Installation And Improved Work Efficiency..
Package Contents ---- 8Pcs 1/4” End Mills, Each Is Individually Packed In A Plastic Storage Box..
Application ---- 1/4 Inch End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc. For Carving, Cutting, Engraving, Milling In Materials Like Die Steel, Carbon Steel, Alloy Steel, Cast Iron, Tool Steel, Titanium, Aluminum, Rosewood, Density Board, Wood, Acrylic, Pvc, Mdf Etc..
Strong And Durable ---- Milling Cutter Is Made Of Hhs-Al Material, It Is High-Wearable And Has A Long Life; Smooth Cutting And Fast Chip-Removal, Gives Outstanding Cutting Performance And Wear Resistance..
Features
- Dimensions ---- Shank diameter: 1/4inch / 6.35mm; Flute cutting length: 3/4 Inch; Overall length: 2-1/2 Inch
- Strong and Durable ---- Milling cutter is made of HHS-AL material, it is high-wearable and has a long life; Smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance.
- Sharp Edge ---- The design of 4 flutes, sharp edge, and superior wear resistance at high cutting speeds; Durable, high precision and not easy to break; easy installation and improved work efficiency.
- Application ---- 1/4 inch end mill bits are suitable for side milling, end milling, finish machining, etc. For carving, cutting, engraving, milling in materials like die steel, carbon steel, alloy steel, cast iron, tool steel, titanium, aluminum, rosewood, density board, wood, acrylic, PVC, MDF etc.
- Package Contents ---- 8pcs 1/4 end mills, each is individually packed in a plastic storage box.
- See more on Amazon...
Brand: soikoi | Manufacturer: ACon net SYARVAST MNKNENG
Dimensions: 0.30 x 2.70 x 0.30 inches
See On Amazon #5
joleully 1/2" Carbide Square End Mill, HRC 45 Deg Single End 4 Flute AlTiN Coating Mill Bits
Asin: B082CGHRDR | Model: 01 | PartNumber: 01 | Ean: 8414806134357
Coating: Altin, High Aluminum Content Provides Excellent Hot Hardness And Oxidation Resistance..
Flutes:4 Flutes,High Rigidity ,Widely Used In Shallow Slot,Profile Milling,And Finish Machining..
Hrc 45 Deg :Carbide End Mill Tools Excel At Working Carbon Steels (~ Hb225), Alloy Steels (Hb225 ~ 325), Pre-Hardened Steels (Up To Hrc45), Hardened Steels (Hrc40 ~ 45), Cast Iron..
Material: Made Of Micro Grain Carbide. Carbide Has Higher Hardness And Wear Resistance And Excellent Cutting Performance Than High-Speed Steel..
Features
- Package Included: 1pcs 1/2" carbide square end Mill
- Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
- Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
- HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
- Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
- See more on Amazon...
Brand: joleully | Manufacturer: Home of quality tools
Dimensions: 0.39 x 0.39 x 2.76 inches | Weight: 111.40 Grams
See On Amazon #6
Shars 3/16-3/4" 4 Flute HSS Single End Center Cut End Mill Set 10PCS 404-5872 M)
Asin: B082325KW2
Brand: Shars | Manufacturer: Shars
See On Amazon #7
SPEED TIGER Chamfer End Mill - CNC Carving Bits, V Groove, 90 Degree, ICSM1/4"Shank 2"OVL (1 Piece, 1/4" 90 ) - for Wood, Alloy Steels, Hardened Steels Mill Bits Sets for DIYers & Professionals
Asin: B099DR8P6V | Model: ICSM0901-4-ZrN-A | PartNumber: ICSM0901-4-ZrN-A
✅ High-Performance Material - Crafted From Micrograin Carbide, This End Mill Offers Exceptional Toughness, Durability, And Machinability, Delivering Outstanding Performance And Great Value For Its Price..
✅ Dedicated Support - Feel Free To Reach Out To Us Via Amazon For The Cutting Condition Data, Ensuring You Get The Most Suitable Product For Your Needs..
✅ Distinctive Design - Our Product Has A Distinct Design That Is Perfect For Chamfering, Engraving V-Grooves, And Centering..
✅ Zrn + Altibn Coating - The Zirconium Nitride (Zrn) +Titanium Aluminum Boron Nitride (Altibn) Coatings Ensure Stability Even At High Temperatures And Provide Superior Heat Resistance Compared To Tialn, Tin, Or Ticn Coatings..
Features
- APPLICATION - Our carbide tools are highly effective for working with Wood, Aluminum, Copper, MDF, Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.
- ZrN + AlTiBN COATING - The Zirconium Nitride (ZrN) +Titanium aluminum boron nitride (AlTiBN) coatings ensure stability even at high temperatures and provide superior heat resistance compared to TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.
- DISTINCTIVE DESIGN - Our product has a distinct design that is perfect for chamfering, engraving V-grooves, and centering.
- DEDICATED SUPPORT - Feel free to reach out to us via Amazon for the Cutting Condition Data, ensuring you get the most suitable product for your needs.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.24 x 0.24 x 1.97 Inches | Weight: 0.04 pounds
See On Amazon #8
SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated
Asin: B07S4G47XF | Model: P2E-1/8-5Pcs | PartNumber: P2E-1/8-5Pcs
Premium Quality. Made Of High Quality Tungsten Carbide, Precision Edge-Grinding Technology; Long Service Life, Not Easy To Break; Excellent Cutting Results And Enhanced Productivity.
Package Include. 5 Pieces High Quality End Mill Pack In A Individual Plastic Box.
Wide Application. For Cnc, Engraving Machine, Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc; Suitable For Side Milling, End Milling, Finish Machining, Etc..
Specification. Flat Top, 2-Flute, Hrc55 With Tialn Coated, Use 1/8" Collet.
Features
- ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
- SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8 collet
- PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
- WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
- PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.10 x 1.50 x 0.13 Inches
See On Amazon #9
CNC End Mill Set, Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm 8pcs
Asin: B07TWTZRQZ | Ean: 8431271486521
Detail Design: High-Precision Cutting Edge With Suitable Negative Forefoot Design, Taking Into Account The Strength And Sharpness Of The Cutting Edge. At The Same Time, The Large Core Diameter Is Used To Enhance The Rigidity Of The Tool And Make The Cutting And Chip Removal Stable..
Package Included：8 X 4 Flutes Carbide Metric End Mill Cutter Set.
Wide Application Cnc End Mill：It Can Be Used On Many Fields, Such As Metal Processing, Cnc Machining And Engineering Using. Large Chip Flute Design For Smoother Chip Removal, Making The Workpiece Smoother And Brighter..
Material: Tungsten Steel Carbide Has The Advantages Of High Hardness, Wear Resistance, Toughness And Corrosion Resistance. It Also Has Stronger Heat Resistance Than Hss, So It Can Maintain Hardness Even At High Temperature. Tungsten Steel Is Mainly Composed Of Tungsten Carbide And Cobalt, Accounting For 99% Of All Components. Tungsten Steel Is Also Called Cemented Carbide And Is Considered To Be The Teeth Of Modern Industry..
Features
- 2-12mm 4Flutes 8PCS Carbide Metric End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs.
- Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry.
- Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable.
- Wide Application CNC End Mill It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.
- Package Included 8 x 4 Flutes carbide metric End Mill Cutter set
- See more on Amazon...
Brand: Home of quality tools | Manufacturer: Home of quality tools
See On Amazon #10
ACCUCUT I4KES 1/8 Carbide Square End Mill- 4 Flute Milling Bit Set for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50 - AlTiN Coating CNC Router Bit, 45 Degree Helix (5 pcs)
Asin: B09HRR4SQV | Ean: 4711232489100
Altin Coating: It Is A Strong Coating That's Coated At Temperatures Between 450°C To 475°C. It Is Able To Provide High Wear Resistance, Lubricity, Exceptional Oxidation Resistance, Extreme Hardness, And Excellent Abrasive Wear Resistance. It Has Higher Reliability In Dry Operations, Heat Resistance, Hard Machining, And The Resistance Can Be Reduced..
4 Flute Cutter: It Has Uniqe Geometry And Strong Cutting Edge. 4 Flute Is Great For Speedy Cutting. Ideal For Planar, Step, Groove, Forming Surface While The 45 Degree Helix Design Can Perform Smooth Surface Finish, Better Chip Removal Control Than Those With Lower Helix Degree..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
- Solide Carbide: The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450 C to 475 C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
- 4 Flute Cutter: It has uniqe geometry and strong cutting edge. 4 flute is great for speedy cutting. Ideal for planar, step, groove, forming surface while the 45 degree helix design can perform smooth surface finish, better chip removal control than those with lower helix degree.
- See more on Amazon...
Brand: A ACT ACCU-CUT | Manufacturer: A ACT ACCU-CUT
Dimensions: 2.17 x 2.70 x 0.55 inches
See On Amazon #11
SPEED TIGER Carbide Square End Mill - 4 Flute - IPVE1/4"4 (1 Piece, 1/4") - Unequal Flute Spacing & Helix Design - Anti-Vibration - for Stainless Steel - Mill Bits Sets for DIYers & Professionals
Asin: B07FSZF1H6 | Model: IPVE1-4-4 | PartNumber: IPVE1-4-4 | Ean: 4712805504374
✅ Distinctive Design - Our Product Delivers High Performance, Firm Edges, Anti-Vibration, Less Chatter, Reduced Burring, And Stable Machining Of Difficult-To-Cut Materials..
✅ Dedicated Support - Feel Free To Reach Out To Us Via Amazon For The Cutting Condition Data, Ensuring You Get The Most Suitable Product For Your Needs..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ High-Performance Material - Crafted From Micrograin Carbide, This End Mill Offers Exceptional Toughness, Durability, And Machinability, Delivering Outstanding Performance And Great Value For Its Price..
Features
- APPLICATION - Our carbide tools are highly effective for working with Titanium, Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.
- HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.
- DISTINCTIVE DESIGN - Our product delivers high performance, firm edges, anti-vibration, less chatter, reduced burring, and stable machining of difficult-to-cut materials.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Feel free to reach out to us via Amazon for the Cutting Condition Data, ensuring you get the most suitable product for your needs.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.04 x 2.50 x 0.25 inches | Weight: 0.06 Pounds
See On Amazon #12
1/4" High Carbide Steel Cutting Tool Drill Reamer Tire Repair Burr
Asin: B07SQ8RKLH | Ean: 0606314853679 | UPC: 606314853679
3.Dia. : 6Mm (1/4").
5.Drill Length: 55Mm.
4.Total Length: 90Mm.
2.Color: Silver.
Features
- 1.Material: High carbon steel
- 2.Color: Silver
- 3.Dia. : 6mm (1/4)
- 4.Total length: 90mm
- 5.Drill length: 55mm
- See more on Amazon...
Brand: Bonlting | Manufacturer: Bonlting
See On Amazon #13
Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100
Asin: B01FGFFDAU | Model: 1810-0100 | PartNumber: 1810-0100 | Ean: 0641799801654, 0663566003948, 7241871027823 | UPC: 663566003948, 641799801654
One Of Each Size In Both 2 & 4 Flute: With 3/8'' Shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16'', With 1/2'' Shank: 1/2'',9/16'', With 5/8'' Shank: 5/8'',11/16'', With 3/4'' Shank: 3/4''.
Comprehensive Milling Operations: Ideal For Face, Ramping, Slot, Plunge, And Pocket Milling, Offering Flexibility In Machining Strategies..
Durable H.S.S. With Tin Coating: High-Speed Steel Construction With Titanium Nitride Coating For Enhanced Longevity And Performance..
Shank Size Variety: Includes 3/8", 1/2", 5/8", And 3/4" Shanks, Ensuring Compatibility With A Wide Range Of Milling Machines..
4 Flutes End Mills: These End Mills Have A Cutting Diameter Ranging From 3/16" To 3/4", A Shank Diameter Ranging From 3/8" To 3/4", A Flute Length Ranging From 1/2" To 1-5/8", And An Overall Length Ranging From 2-3/8" To 3-3/8"..
Versatile Cutting Range: Features End Mills From 3/16" To 3/4" In Both 2F & 4F, Suitable For Various Material And Application Needs..
2 Flutes End Mills: These End Mills Have A Cutting Diameter Ranging From 3/16" To 3/4", A Shank Diameter Ranging From 3/8" To 3/4", A Flute Length Ranging From 7/16" To 1-5/16", And An Overall Length Ranging From 2-5/16" To 3-9/16"..
Application Specific Design: 4-Flute For Steel And 2-Flute For Wood, Plastics, Aluminum, And Non-Ferrous Metals, Covering A Broad Machining Spectrum..
Straight Shank..
Features
- H.S.S.
- Straight Shank.
- One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16'', With 1/2'' shank: 1/2'',9/16'', With 5/8'' shank: 5/8'',11/16'', With 3/4'' shank: 3/4''
- 2 Flutes End Mills: These end mills have a cutting diameter ranging from 3/16 to 3/4, a shank diameter ranging from 3/8 to 3/4, a flute length ranging from 7/16 to 1-5/16, and an overall length ranging from 2-5/16 to 3-9/16.
- 4 Flutes End Mills: These end mills have a cutting diameter ranging from 3/16 to 3/4, a shank diameter ranging from 3/8 to 3/4, a flute length ranging from 1/2 to 1-5/8, and an overall length ranging from 2-3/8 to 3-3/8.
- Versatile Cutting Range: Features end mills from 3/16 to 3/4 in both 2F & 4F, suitable for various material and application needs.
- Durable H.S.S. with TiN Coating: High-speed steel construction with Titanium Nitride coating for enhanced longevity and performance.
- Shank Size Variety: Includes 3/8, 1/2, 5/8, and 3/4 shanks, ensuring compatibility with a wide range of milling machines.
- Application Specific Design: 4-flute for steel and 2-flute for wood, plastics, aluminum, and non-ferrous metals, covering a broad machining spectrum.
- Comprehensive Milling Operations: Ideal for face, ramping, slot, plunge, and pocket milling, offering flexibility in machining strategies.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 5.91 x 11.81 x 3.94 inches
See On Amazon #14
SPEED TIGER Solid Carbide CNC Spiral O Single Flute End Mill - IAP1/4"Diameter 1/4"Shank 2"OVL(1 Piece, 1/4") - for Aluminum, Wood, Plastic, Brass, Copper Cutting Mill Bits Sets for Professionals
Asin: B08TZJTH4C
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Zrn Coating - The Zirconium Nitride (Zrn) Coatings Make It Exceptionally Durable, Improving Wear Resistance And Effectively Reducing Built-Up Edges While Machining..
Features
- APPLICATION - Our carbide end mills are highly efficient in handling various materials such as Wood, Aluminum, Copper, Plastic, Brass, Carbon Steels (~HB225), Alloy Steels (HB225~325), and Pre-hardened Steels (up to HRC46).
- ZrN COATING - The Zirconium Nitride (ZrN) coatings make it exceptionally durable, improving wear resistance and effectively reducing built-up edges while machining.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 2.52 x 0.24 x 0.24 Inches | Weight: 0.06 pounds
See On Amazon #15
End Mill 3/8" Cutting Dia 3/8" Shank 4 Flute HSS End Mill Drill Bit, CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Foam, Plastic
Asin: B08Q8DTY6G | Model: 2020-12-10-21-19 | PartNumber: 2020-12-10-21-19
Sharp Cutting Edge, Smooth Cutting, Several Times The Cutting Effect, Smooth And Burr Free Cutting Material..
Various Specifications, Hard And Firm, Smooth Cutting, Surface Hardness Up To Hrc62-66 Degrees..
Four-Tooth Design Makes The Milling Cutter More Wear-Resistant And Reduces Product Burrs During Processing..
Selected High Speed Steel, High Hardness, Wear Resistance, High Strength, Good Toughness And Heat Resistance..
Features
- Vertical Milling Cutter with Super-Hard Handle, Forged with High-Speed Steel, Quenched at High Temperature, Precision Grinding.
- Selected High Speed Steel, High Hardness, Wear Resistance, High Strength, Good Toughness and Heat Resistance.
- Sharp Cutting Edge, Smooth Cutting, Several Times The Cutting Effect, Smooth and Burr Free Cutting Material.
- Four-Tooth Design Makes The Milling Cutter More Wear-Resistant and Reduces Product Burrs During Processing.
- Various Specifications, Hard and Firm, Smooth Cutting, Surface Hardness Up to HRC62-66 Degrees.
- See more on Amazon...
Brand: LingGan | Manufacturer: LingGan
Weight: 0.09 pounds
See On Amazon #16
SPEED TIGER Micrograin Carbide Square End Mill - 2 Flute - ISE1/8"2T (5 Pieces, 1/8") - for Milling Alloy Steels, Hardened Steel, Metal & More Mill Bits Sets for DIYers & Professionals
Asin: B07F3SGRBN | Model: ISE1-8-2T | PartNumber: ISE1-8-2T | Ean: 4712805503971
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Altibn Coating - This Coating, Made Of Titanium Aluminum Boron Nitride (Altibn), Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Features
- APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~53), and Cast Iron.
- AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
See On Amazon #17
SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving
Asin: B07R4TRZYX | Model: SP-3/8-1/2-U | PartNumber: SP-3/8-1/2-U
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/2" Collet.
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/2inch shank and 3/8inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length, can be used on routers with 1/2" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/2 collet
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 4.45 x 3.15 x 1.14 inches
See On Amazon #18
SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall
Asin: B083K79L2C
For Cnc Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Endmill Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Flat Top With 2-Flute, Material: Solid Carbide With Tialn Coated For Hrc 55.
Features
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
- Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
- For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
- The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.10 x 2.50 x 0.25 inches
See On Amazon #19
8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm
Asin: B091DN8B1M | Model: 01 | PartNumber: 01 | Ean: 8414740896717
Detail Design: Cutting Edge With Suitable Negative Forefoot Design, Taking Into Account The Strength And Sharpness Of The Cutting Edge. At The Same Time, The Large Core Diameter Is Used To Enhance The Rigidity Of The Tool And Make The Cutting And Chip Removal Stable..
Package Included：8 X 4 Flutes Carbide Metric End Mill Cutter Set.
Wide Application Cnc End Mill：It Can Be Used On Many Fields, Such As Metal Processing, Cnc Machining And Engineering Using. Large Chip Flute Design For Smoother Chip Removal, Making The Workpiece Smoother And Brighter..
2-12Mm 4Flutes 8Pcs Carbide Metric End Mill Set: This End Mill Set Includes 8 Diameter Sizes Of 2Mm, 3Mm, 4Mm, 5Mm, 6Mm, 8Mm, 10Mm, 12Mm, Satisfy Your Different Needs..
Features
- Material: Tungsten steel Carbide has the advantages of wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry.
- 2-12mm 4Flutes 8PCS Carbide Metric End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs.
- Detail design: cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable.
- Wide Application CNC End Mill It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.
- Package Included 8 x 4 Flutes carbide metric End Mill Cutter set
- See more on Amazon...
Brand: Hunricho | Manufacturer: Home of quality tools
See On Amazon #20
1/8 Cutting Diameter Solid Carbide CNC Milling Head End Mill 4 Flutes Titanium Coated Engraving Milling Cutter Carbide Drill Bit
Asin: B0CPDYMGFD
【Use】 End Mill Drill Bits Are Suitable For Side Milling, End Milling, Finishing, Etc. Suitable For Carbon Steel, Alloy Steel, Mold Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc..
【After-Sales】If You Have Any Questions, Please Contact Us And We Will Reply To You In Time. Your Satisfaction Is Our Greatest Pursuit, Thank You For Your Support And Purchase.
【Cutting】 Groove Design, The Drill Bit Has A Larger Spiral Cutting Space, No Chips Stick, Smooth Cutting, And Fast Chip Removal Speed.
【Material】These Carbide End Mills Are Made Of Ultra-Fine Grain Carbide Material For Excellent Cutting And Milling Performance.
Features
- High Efficiency These drill bits have sharp edges and are able to carve quickly, making them highly efficient, durable, high-precision and not easy to break. Smoke-free and burr-free processing
- Material These carbide end mills are made of ultra-fine grain carbide material for excellent cutting and milling performance
- Use End mill drill bits are suitable for side milling, end milling, finishing, etc. Suitable for carbon steel, alloy steel, mold steel, tool steel, cast iron, titanium, aluminum, etc.
- Cutting Groove design, the drill bit has a larger spiral cutting space, no chips stick, smooth cutting, and fast chip removal speed
- After-Sales If you have any questions, please contact us and we will reply to you in time. Your satisfaction is our greatest pursuit, thank you for your support and purchase
- See more on Amazon...
Brand: NZ | Manufacturer: NZ
See On Amazon
Looking For Something Else?
Search