CoLuck 32mm & 36mm Fan Clutch Wrench Set,Water Pump Pulley Holder Removal Tool For BMW, Ford, GM, Dodge,Chevrolet,Jeep Fan Clutch Removal Kit,Water Pump Holder, Nut Water Hub Removal
Asin: B0CJ5J6Q3L | Model: Water Pump Holder Removal Tool Kit | PartNumber: Water Pump Holder Removal Tool Kit | Ean: 9331621039607
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.User-Friendly Design ★ - Attach The Pulley Holder Bar With Your Bolts Inserted Through The Holes, Lock It Securely In Place On The Water Pump Face, Place The Fan Clutch Wrench On The Fan Clutch Nut, And Turn Clockwise Using The 32Mm Or 36Mm Spanner (Both Included) To Loosen The Nut. If The Tool's Hole Sizes Are Smaller Than The Bolts Holding The Pulley Wheel To The Water Pump, Remove The Bolts And Effortlessly Reinstall Them Over The Bar..
Essential For Mechanics ★ - Say Goodbye To Time-Consuming And Frustrating Clutch Fan Removals. The Coluck Fan Clutch Removal Tool Set, Equipped With A 32Mm & 36Mm Fan Clutch Wrench And Water Pump Pulley Holding Tool, Streamlines Water Pump And Fan Clutch Replacements. Make This Indispensable Set Your Trusted Assistant - Just Add It To Your Cart Now!.
Fits Your Vehicle★- Fan Clutch Wrench Set Is Not Fit For Chevy Models Chevy Astro Van & 2003 Ford F150 5.4 Engine 2000 7.3 Powerstroke F250 2003 Ford F150 5.4 2005 Ram 2500 5.9L 2008 1999 F150 2007 F-150 5.4L , But Not Limited To. Fan Clutch Wrench Tool Compatible With Bmw Models Such As E46, E36, E30, E39, E46, E54, E1997, 328I,330I, 533I,530I, 540I, 325I, M4, M10, M20, M30, M40, M44, M50, M52, M52tu, M54, M56, M60, M70, M73, S14, S38, S54, S50b30, S50b32, And 1997 Z3 1.9..
Built To Last★- The 15" Fan Clutch Wrench And Holder Are Specially Lengthened To Provide Extra Leverage With Sure Grip When Working On Hard-To-Get-To Fan Clutch Nuts On Metric Thermo-Viscous Fans, Letting You Service Your Timing Or Water Pump Quickly And Easily. The Rubber Handle Covered In The Middle Helps Prevent Hand Fatigue During Prolonged Us..
Features
- REMOVE & REPLACE AUTOMOTIVE FAN CLUTCHES - Elevate your toolkit with the CoLuck Fan Clutch Wrench Kit, featuring 32mm and 36mm fan clutch wrenches along with a Fan Pulley Holding Tool. This set is engineered for effortless removal of lock nuts on temperature-dependent viscous fans, making it the ideal fan clutch removal tool kit for your engines. The holder bar securely locks the water pump pulley in place, ensuring a precise fit and substantial cost savings.
- BUILT TO LAST - The 15 fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us.
- USER-FRIENDLY DESIGN - Attach the pulley holder bar with your bolts inserted through the holes, lock it securely in place on the water pump face, place the fan clutch wrench on the fan clutch nut, and turn clockwise using the 32mm or 36mm spanner (both included) to loosen the nut. If the tool's hole sizes are smaller than the bolts holding the pulley wheel to the water pump, remove the bolts and effortlessly reinstall them over the bar.
- FITS YOUR VEHICLE - Fan Clutch Wrench Set is NOT FIT for Chevy models chevy astro van & 2003 Ford F150 5.4 engine 2000 7.3 powerstroke f250 2003 Ford F150 5.4 2005 Ram 2500 5.9L 2008 1999 f150 2007 F-150 5.4L , but not limited to. Fan clutch wrench tool compatible with BMW models such as E46, E36, E30, E39, E46, E54, E1997, 328i,330i, 533i,530i, 540i, 325i, M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32, and 1997 Z3 1.9.
- ESSENTIAL FOR MECHANICS - Say goodbye to time-consuming and frustrating clutch fan removals. The CoLuck Fan Clutch Removal Tool Set, equipped with a 32mm & 36mm fan clutch wrench and water pump pulley holding tool, streamlines water pump and fan clutch replacements. Make this indispensable set your trusted assistant - just add it to your cart now!
- See more on Amazon...
Brand: CoLuck | Manufacturer: CoLuck
Dimensions: 0.79 x 15.75 x 3.94 inches | Weight: 1.90 pounds
See On Amazon Similar To CoLuck 32mm 36mm Fan
#1
Easycargo 30mm Fan 5V 3.3V DC Quiet Fan for Raspberry Pi 5 4 3B+ 3007 (4-Sets)
Asin: B0792BW2VH | Model: NA | PartNumber: NA | Ean: 0791810638377 | UPC: 791810638377
Low Noise (15.92Dba), Long Life (30,000 Hours).
Compatible With Other Robotic Projects And Development Boards.
One-To-Two Wire Connector Interface For Dual Speed Mode (3.3V And 5V Dc).
Features
- Hypro sleeve fan suitable for Raspberry Pi 5, Pi 4 and Pi 3 B+.
- One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC)
- Low noise (15.92dBA), Long life (30,000 hours)
- Compatible with other robotic projects and development boards
- See more on Amazon...
Brand: Easycargo | Manufacturer: Easycargo
Dimensions: 0.30 x 1.18 x 1.18 Inches | Weight: 0.01 Pounds
See On Amazon #2
MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt Fan 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR and Other Small Appliances Series Repair Replacement
Asin: B07CH6YC32 | Model: 50IGRFWL2611N | PartNumber: 50IGRFWL2611N | Ean: 0192684015521 | UPC: 192684015521
Bearing Is High Precision, Long Life And Low Noise..
Working Current: 0.08A; Air Flow: 5.75±10% Cfm; Power: 0.96W; Cable Length: 280Mm..
Oil Bearing 30000 Hours; Certification: Ce,Ul,Cul..
Temperature Of Usage Environment: -10℃ To +70℃..
Features
- Size: 40 mm x 40 mm x 10 mm; Working Voltage: DC 12V.
- Temperature of usage environment: -10 to +70 .
- Bearing is high precision, long life and low noise.
- Oil bearing 30000 hours; Certification: CE,UL,CUL.
- Working Current: 0.08A; Air Flow: 5.75 10% CFM; Power: 0.96w; Cable length: 280mm.
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.57 x 1.57 inches | Weight: 0.13 pounds
See On Amazon #3
Wathai Brushless Cooling Blower Fan 120mm x 32mm 12V High Airflow DC Centrifugal Fan For Radiator
Asin: B07RMJC9NT | Model: Wathai | PartNumber: Wathai | Ean: 0702334356746 | UPC: 702334356746
【Fan Replacement 】Bearing Type: Sleeve Bearing ; Life: 35000 Hours; Connecter: Xh2.54-2Pin; Cable Length: 25Cm Or 10 Inches.
【120Mm Fan】Dimension: 120Mm(L) X 120Mm(W) X 32Mm(H) / 4.72X4.72X1.26 In. Per Fan / Air Pressure (In H2o): 1.35; Package Include: 1 Piece Fan And Mounting Screws & Nuts.
【 Diy Project 】You Can Cut The Plug And Have It Powered By A 12V 2A Adapter. The Connecter Cannot Be Adapted To All Usage Scenarios. In Some Cases, They Are Not Ready For Use Out Of The Box. You Can Diy Cut Off The Connecter And Re-Solder Them..
【Dc Brushless Fan 12V 】 Rated Voltage:12V 1.0A; Speed: 3000Rpm; Air Flow: 38.5Cfm; Noise:45Dba.
Features
- 12V Blower Fan Small and powerful Perfect for DIY inflatable ,to cool amplifier ,Car Parts, Playtations, Rokus, TVs, receivers, mondems, routers, DVRs, Computers and other audio video electronics.
- DC Brushless Fan 12V Rated Voltage:12V 1.0A; Speed: 3000RPM; Air flow: 38.5CFM; Noise:45dBA
- Fan Replacement Bearing type: Sleeve Bearing ; Life: 35000 hours; Connecter: XH2.54-2Pin; Cable Length: 25cm Or 10 inches
- DIY Project You can cut the plug and have it powered by a 12v 2A adapter. The Connecter cannot be adapted to all usage scenarios. In some cases, they are not ready for use out of the box. You can DIY cut off the Connecter and re-solder them.
- 120mm Fan Dimension: 120mm(L) x 120mm(W) x 32mm(H) / 4.72x4.72x1.26 in. per fan / Air Pressure (In H2O): 1.35; Package include: 1 Piece fan and mounting screws & nuts
- See more on Amazon...
Brand: Wathai | Manufacturer: Wathai
Dimensions: 1.26 x 4.72 x 4.72 inches | Weight: 0.42 pounds
See On Amazon #4
RC Cooling Fan 1/10 35mm 21000RPM 8.4V Aluminum ESC Motor Cooling Fan Heatsink for RC Car 1/8 1/10 Scale 3650,3660,3670 Brushless Motor (Black+Silver)
Asin: B0BC3SV6XC | Model: FAN-35-1S | PartNumber: FAN-35-1S
▶【Exquisite Workmanship】 Made Of High Quality Material, Exquisite Workmanship Make This Cooling Fan Is Durable For Long Term Use..
▶【Easy To Install】 Motor Cooling Fan Compatible With Brackets With Φ3mm Mounting Holes. Notice: The Plug Is Reverse Polarity Protected, And You Don' Worry The Wrong Connection Will Damage The Rc Fan..
▶【Unique Appearance Design】 Heatsink Is Black Body With Cool Silver Patterns And Lines, Simple And Cool..
▶【Prevent Motor From Overheating】 The Speed Can Reach Up To 21000 High Rpm, Excellent Heat Dissipation Effect To Protect The Motor..
Features
- RC Car 3650 Motor Cooling Fan Designed for RC model car 1/8scale, 1/10scale, 1/12 scale 3650-3674 brushless motor the diameter of the motor is 36mm/1.42inch.
- Prevent Motor From Overheating The speed can reach up to 21000 high RPM, excellent heat dissipation effect to protect the motor.
- Exquisite Workmanship Made of high quality material, exquisite workmanship make this cooling fan is durable for long term use.
- Unique Appearance Design Heatsink is black body with cool silver patterns and lines, simple and cool.
- Easy to Install Motor cooling fan compatible with brackets with 3mm mounting holes. Notice: The plug is reverse polarity protected, and you don' worry the wrong connection will damage the rc fan.
- See more on Amazon...
Brand: ARRAROWN | Manufacturer: DideaECO
Weight: 0.04 Pounds
See On Amazon #5
Wathai 40mm x 10mm DC Brushless Fan 12V 3Pin Cooling for 3D Printing, PC Computer Case, CPU Replacement, Graphics Card, Raspberry PI
Asin: B07PPQVF8Y | Model: 4010s12v3p-9F | PartNumber: 4010s12v3p-9F | Ean: 0702334356265 | UPC: 702334356265
【Dc Brushless Fan 12V】12V Fan Employed For Cooling Computer Components, Such As 3D Prints, Orange Pi 5 Plus Case, Ps4 Pros And Laptops, And Serving As Exhaust Fans For Different Setups..
【3Pin Fan】Dimension: 40Mm X 40Mm X 10Mm / 1.55X1.55X0.39 In. Per Fan. Rated Voltage:12V 0.06A; Speed: 4500Rpm; Air Flow: 4.95Cfm; Noise:24Dba; Bearing Type: Sleeve Bearing ; Life: 35000 Hours; Connecter: 3Pin; Cable Length: 25Cm Or 9.8 Inches.
【40Mm Fan】2 Piece Fan For Equipment Cooling, Including Xbox Consoles And Devices In Entertainment Centers Or Enclosed Spaces. For Enhancing Ventilation And Controlling Airflow In Computer Cases..
【12V Fan】40X20mm Size Ideal For 1U Servers Or Replacing Fans In Network And Storage Equipment (Routers, Switches, Nas, Nvr, Etc.) Or Other Devices Such As Dvrs..
Features
- Mico Fan Good replacement for 3D printers, DVRs, NAS, Server gear , LSI raid controller, motherboard , camera dvr case, other network and storage devices, etc.
- 12V Fan 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS, NVR, etc.) or other devices such as DVRs.
- DC Brushless Fan 12V 12V fan employed for cooling computer components, such as 3D prints, orange pi 5 plus case, PS4 Pros and laptops, and serving as exhaust fans for different setups.
- 40mm Fan 2 Piece fan for equipment cooling, including Xbox consoles and devices in entertainment centers or enclosed spaces. For enhancing ventilation and controlling airflow in computer cases.
- 3Pin Fan Dimension: 40mm x 40mm x 10mm / 1.55x1.55x0.39 in. per fan. Rated Voltage:12V 0.06A; Speed: 4500RPM; Air flow: 4.95CFM; Noise:24dBA; Bearing type: Sleeve Bearing ; Life: 35000 hours; Connecter: 3Pin; Cable Length: 25cm Or 9.8 inches
- See more on Amazon...
Brand: Wathai | Manufacturer: Wathai
Dimensions: 0.39 x 1.57 x 1.57 inches | Weight: 0.04 pounds
See On Amazon #6
Dorhea 4pcs 3007 Fan Black for Raspberry Pi 4 Fan 30x30x7mm Pi Brushless Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3 B, Pi 2, Pi B+, Pi Zero/Zero W,Robot Project
Asin: B096LMD79B | Ean: 0701715471399 | UPC: 701715471399
Unique Terminal Interface -- With Two Terminals, Its Connector Is Separating, One-To-Two Interface Connector Interface For Dual Speed Mode (3.3V And 5V Dc).
This Fan Can Be Installed For Most Of The Standard Raspberry Pi Cases And Also Is Compatible With Retroflag Nespi Case.
Compatible With Raspberry Pi B, B+, A+, 2, 3, 4 Model B And B+ And Pi Zero/Zero W Other Robotic Projects And Development Boards.
Super Quiet -- Cooling Fan Run Smoothly(15.92Dba), Long Life (30,000 Hours) Keep Cpu Safe Without Overheating.
Features
- High Quality -- 100% brand new and in good condition,with high quality ,great performance
- Super Quiet -- Cooling fan run smoothly(15.92dBA), Long life (30,000 hours) keep CPU safe without overheating
- Unique Terminal Interface -- with two terminals, Its connector is separating, One-to-Two interface connector Interface for dual speed mode (3.3V and 5V DC)
- Compatible with Raspberry Pi B, B+, A+, 2, 3, 4 model B and B+ and Pi Zero/Zero W other robotic projects and development boards
- This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
Weight: 0.22 Pounds
See On Amazon #7
MakerFocus 2pcs Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan DC Brushless CPU Quiet LED Cooling Fan 30mm 30mm Fan Cooler Radiator 3 to 5.8V for Raspberry Pi 4 Model B, Raspberry Pi 3B+ 3B 2B+
Asin: B0831JM535 | Model: 20XUKOA57U16DC | PartNumber: 20XUKOA57U16DC | Ean: 0673400202697 | UPC: 673400202697
【Specific Parameters】According To The Voltage Requirements In Accordance With Your Needs To Choose To Use; Rated Voltage: Dc 5V; Working Voltage: 3.0-5.8V; Current: 0.2A; Air Volume: 5M³ / H; Noise: 18 Db; Rated Voltage: Dc 5V; Number Of Revolutions: 5000Rpm±15%; Mini Size: 30 * 30 * 7.5 Mm..
【Strong After-Sales Service Team】As Long As You Have Any Questions About The Product, We Will Resolve Your Issue Immediately If Received Your Email, Your Satisfactory Purchase Experience Is Our Greatest Hope! How To Email Us? Plz Click “Makerfocus” And Click “Ask A Question” To Email Us! Looking Forward To Your Consultation!.
【Wide Range Of Applications】Suitable For A Variety Of Products: Pi Fan, Raspberry Pi Zero W Heatsink, Suitable For Raspberry Pi 4 Model B / 3B+ / 3B/ 2B+ / 2B; Specially Feature: When The Fan Turns Up, You Will See Blue Light..
【Super Quiet】This Fan Will Not Make You Feel Uneasy During They Are Working, But Also A Quiet Experiment Environment For You. Perfect Cooling Tool: Allows Your Raspberry Pi Or Other Experimental Tools To Quickly Dissipate Heat And Will Extend The Working Life Of Your Pi Or Other Development Board..
Features
- Installation Screws Included Don't need to purchase screws by yourself. Intimate service, easy to install! NOTE: The raspberry pi board is not included!!!
- Super Quiet This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development board.
- Specific parameters According to the voltage requirements in accordance with your needs to choose to use; Rated voltage: DC 5V; Working voltage: 3.0-5.8V; Current: 0.2A; Air volume: 5m / h; Noise: 18 dB; Rated voltage: DC 5V; Number of revolutions: 5000RPM 15%; Mini size: 30 * 30 * 7.5 mm.
- Wide range of applications Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry pi 4 Model B / 3B+ / 3B/ 2B+ / 2B; Specially Feature: When the fan turns up, you will see Blue light.
- Strong After-sales Service Team As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerFocus and click Ask a question to email us! Looking forward to your consultation!
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.30 x 1.18 x 1.18 inches | Weight: 0.04 Pounds
See On Amazon #8
UMLIFE 4PCS 3D Printer Cooling Fan 40mmx40mmx10mm Oil Bearing Blower Fan DC 12V Brushless Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip (12V 0.08A)
Asin: B07JPBMNVL | Model: 4010-12V | PartNumber: 4010-12V | Ean: 0701715546837 | UPC: 701715546837
☀☀ Made Of High Quality Plastics With High End Bearings, This 3D Printer Part Cooling Fan Can Run Continuously For Days At High Speeds Without Hassle Or Concern..
☀☀ Note: If You Meet The Fans Did Not Work, You Can Swap The Red And Black Wires In The Plug Got It To Work. (Any Questions, You Can Contact Us And We Will Give You A Satisfied Solution!)..
☀☀ Size:40Mm*40Mm*10Mm(L*D*H), Speed:6000Rpm, Noise:27Dba, Bearing: Oil, Dc 12V, 0.08A..
☀☀ Great Replacement Item For Your All Metal Hotend Or Maybe A Small Cooling Fan For Your 3D Printer Nozzle Setup..
Features
- Power Connection: 2 Pin-ph2.5; Cable length is 30cm/11.8in. Connector is already fitted and product is out-of-the-box ready for installation.
- Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
- Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Dimensions: 15.75 x 3.94 x 15.75 inches
See On Amazon #9
WINSINN 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4010 Hydraulic Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 5Pcs)
Asin: B0757LXKST | Model: FAN401012VH | PartNumber: FAN401012VH | Ean: 0733430760243 | UPC: 733430760243
✔️Rated Voltage: Dc 12V, Current: 0.1A, Power: 1.2W, Speed: 6500Prm, Air Pressure: 3.92Mmh₂o, Airflow: 7.1Cfm, Noise: 28.2Dba.
✔️Widely Used: Suitable For Ventilation Of Small Pc Case / Router / Raspberry Pie / Tv Box / Vr Glasses And Any Small Electronic Equipment Cooling Ventilation..
✔️Connector & Cable Length: Xh2.54 – 11.8In(300Mm), Size: 40Mm X 40Mm X 10Mm.
✔️High Quality Hydraulic Bearings, 2-Years Warranty. Balance Price And Performance, Suitable For Daily Use, Life: 35,000 Hours..
Features
- WINSINN 40mm fan 12V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours.
- Rated Voltage: DC 12V, Current: 0.1A, Power: 1.2W, Speed: 6500PRM, Air Pressure: 3.92mmH O, Airflow: 7.1CFM, Noise: 28.2dBA
- Connector & Cable length: XH2.54 11.8in(300mm), Size: 40mm x 40mm x 10mm
- Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation.
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
Dimensions: 0.39 x 1.57 x 1.57 inches | Weight: 0.02 pounds
See On Amazon #10
GDSTIME 40mm Fan, 12V 3Pin Fan, 40mm x 40mm x 20mm 4020 Brushless CPU Cooler (2-Pack)
Asin: B07VXT95GN | Model: GDT4020S12V3PIN | PartNumber: GDT4020S12V3PIN
This 3-Pin Fg Version Fan Can Provides Speed Test Via 3 Pin Connector; Lead Wire: 25 Cm Awm 1007 26Awg; Red Wire: (+); Black Wire:(-); Yellow Wire: Fg Function.
40X40x20 Mm (1.57X1.57X0.79 In.) | Rated Voltage: 12V | Current: 0.08A | Power: 1.2W | Airflow: 7.85 Cfm | Static Pressure: 0.16 In H2o | Noise: 21.35 Dba | Speed: 60000 Rpm.
Hydraulic Bearing Has Low Operating Noise And A Very Long Service Life, Which Can Reach 40,000 Hours; Operating Temperature: 14℉ To 175 ℉.
Quiet Dc Brushless Cooling Fan, 40X40x20 Mm, 12V, 3 Pin; Operating Voltage Range：5.5V To 13.8V. (Overtake To 13.8V, It Can Also Work. But Not Safe, And Seriously Affects Lifespan Of Fan.).
Features
- Ideal for 1U applications or as a great replacment fans in network and storage equipment (rack case, switches, security gateway, NAS etc.) or other devices such as DVRs, car amplifier, ham radio, control box, NVR, 3d printer and more
- Quiet dc brushless cooling fan, 40x40x20 mm, 12V, 3 pin; Operating Voltage Range 5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- This 3-pin FG version fan can provides speed test via 3 Pin connector; Lead wire: 25 cm AWM 1007 26AWG; Red Wire: (+); Black Wire:(-); Yellow Wire: FG Function
- Hydraulic bearing has low operating noise and a very long service life, which can reach 40,000 hours; Operating Temperature: 14 to 175
- 40x40x20 mm (1.57x1.57x0.79 in.) | Rated Voltage: 12V | Current: 0.08A | Power: 1.2W | Airflow: 7.85 CFM | Static Pressure: 0.16 In H2O | Noise: 21.35 dBA | Speed: 60000 RPM
- See more on Amazon...
Brand: GDSTIME | Manufacturer: GDSTIME
Dimensions: 0.79 x 1.57 x 1.57 inches
Warranty: One-year Warranty (Free Replacement)
See On Amazon #11
Coolerguys 12v Ultra Quiet Fan for Pi Devices, 3D Printers, and Microelectronics (40x10mm)
Asin: B07V2BHFGK | Model: CGXXXXL12S | PartNumber: CGXXXXL12S | Ean: 0840556071624 | UPC: 840556071624
Mtbf: 40,000 Hours.
Package Weight Of The Product: 2.08 Ounces.
Certifications: Rohs, Ce.
Features
- Bearing Type: Sleeve Bearing
- Certifications: ROHS, CE
- MTBF: 40,000 hours
- Package weight of the Product: 2.08 Ounces
- See more on Amazon...
Brand: coolerguys | Manufacturer: Coolerguys
Dimensions: 1.57 x 1.57 x 0.39 Inches | Weight: 0.22 Pounds
See On Amazon #12
Easycargo 4pcs 3D Printer 40mm Fan 12V DC, 4010 Cooling Fan Sleeve Bearing Brushless 2 pin, 40mm Cooler Fan + Grill Mounting Kit 40mm x 40mm x10mm
Asin: B07S9W1JGB | Model: EDM4010C12-04 | PartNumber: EDM4010C12-04 | Ean: 6091022467265
Air Flow (5.49 Cfm), Speed (6500Rpm), Noise Level (25.1Dba), Life Time (40,000 Hours), Working Voltage (10.8-13.2Vdc).
Package Includes: 4 Pieces 40Mm Fan 12V Dc + 4 Pack 40Mm Fan Grill / Guard + Screw Bolts Mounting Kit..
Can Be Used For For Cooling Stepper Motor Driver, 3D Printers, Nema 17, Thermoelectric Peltier Module Tec1-12706 And Other Electronics & Robotic Projects..
Dimension (40X40x10mm), Connector (2-Pin-2.5Mm), Wire Length (5.6"/150Mm), Weight (13.5 Gram)..
Features
- Hypro sleeve bearing cooling fan 40mm 12V DC.
- Dimension (40x40x10mm), Connector (2-pin-2.5mm), Wire length (5.6/150mm), Weight (13.5 gram).
- Air flow (5.49 CFM), Speed (6500rpm), Noise level (25.1dBA), Life time (40,000 hours), Working Voltage (10.8-13.2VDC)
- Can be used for for cooling stepper motor driver, 3D printers, NEMA 17, Thermoelectric Peltier Module TEC1-12706 and other electronics & robotic projects.
- Package includes: 4 pieces 40mm Fan 12V DC + 4 Pack 40mm Fan Grill / Guard + Screw Bolts Mounting Kit.
- See more on Amazon...
Brand: Easycargo | Manufacturer: Easycargo
Dimensions: 0.39 x 1.57 x 1.57 inches | Weight: 0.03 pounds
See On Amazon #13
Antrader 3010 12V DC Brushless Cooling Fan 30x30x10mm for DIY 3D Printer Extruder Hotend V6 V5 CPU Humidifier Pack of 5
Asin: B07K1ZLLH7 | Model: AZ18072705-AZ18092609 | PartNumber: AZ18072705-AZ18092609
Dc Brushless Cooling Fan, Rated Voltage: Dc 12V, Current: 0.15A; Noise: 24Dba.
Compact Motor Design For Computer Case 30Mm 3D Printer Fan Used In Humidifier, Aromatherapy And Other Small Appliances Series; Small Heat Radiating Communication Equipment; Military Equipment; Intelligent Industrial Control Equipment Plate Cooling Heat, High Precision Medical Equipment Cooling; Pc Cpu Server Cooling Dissipation; Electronic Cooling Fans And So On..
30 X 30 X 10Mm Fans. Connector: 2 Terminal Connector With 2Pin-Ph2.5.
Plastic Construction 5 Blade Fan. Dual Ball Bearing; Speed: 9000 + -10% Rpm; Wind Speed: 2.5M/S, Wind Volume: 2.8Cfm.
Features
- High quality mini brushless 3010 DC 12V fan, sleeve-bearing design cooling cooler.
- Plastic construction 5 blade fan. Dual Ball Bearing; Speed: 9000 + -10% RPM; Wind Speed: 2.5M/S, Wind Volume: 2.8CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.15A; Noise: 24DBA
- 30 x 30 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 30mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation; electronic cooling fans and so on.
- See more on Amazon...
Brand: Antrader | Manufacturer: Guangzhou Openfind Electronic Commerce CO., LTD
Dimensions: 0.40 x 1.20 x 1.20 inches | Weight: 0.00 Pounds
See On Amazon #14
Wathai 40mm Fan 24V, Ender 3 Upgrade 24 Volt Fan 4020 Dual Ball for 3 Pro 3X CR-10S, DIY Small Electronic Equipment Cooling
Asin: B0CHYF6S2N | Model: 4020 fan | PartNumber: 4020 fan
【Easy To Install】40Mm Blower Fan That Creates A More Efficient Ventilation System. Hotend And Part Cooling Fan Is Easier To Cutting And Splicing The Wires Instead Of Dealing With The Wiring Harness And Feeding The Wires All The Way To The Main Board..
【Versatile Cooling Applications】40Mm(L) X 40Mm(W) X 20Mm(H) /1.55X1.55X0.8 In. Per Fan. For Replacing Fans In Inverter And Storage Equipmentcs Such As Psu，Battery Charger, 3D Printer, Switches, Nas , Dvrs ,Control Box Etc..
【High Performance】Speed Up To 7000Rpm, For Improved Cooling.Rated Voltage :24 Volt 0.08A | Airflow:7.96 ±10%Cfm | Power: 1.92W | Air Pressure (In H2o) : 0.24 | Cable Length: 20Cm | Noise:29Dba.
【Dual-Ball Bearings】Have A Lifespan Of 50,000 Hours And Allows The Fans To Be Laid Flat Or Stand.40Mm Fan Operates At High Airflow Than Stock Fans..
Features
- Compact & Powerful This fan is a perfect replacement for stock fans and fits most Ender 3 printers. It is also compatible with Creality Ender 3, Ender 3X, Ender 3 Pro, Anycubic Mega S and Ender 5 Plus.
- Dual-ball bearings Have a lifespan of 50,000 hours and allows the fans to be laid flat or stand.40mm fan operates at high airflow than stock fans.
- Easy to Install 40mm blower fan that creates a more efficient ventilation system. Hotend and part cooling fan is easier to cutting and splicing the wires instead of dealing with the wiring harness and feeding the wires all the way to the main board.
- High Performance Speed up to 7000RPM, for improved cooling.Rated Voltage :24 volt 0.08A | Airflow:7.96 10%CFM | Power: 1.92W | Air Pressure (In H2O) : 0.24 | Cable Length: 20CM | Noise:29dBA
- Versatile Cooling Applications 40mm(L) x 40mm(W) x 20mm(H) /1.55x1.55x0.8 in. per fan. For replacing fans in inverter and storage equipmentcs such as PSU battery charger, 3D printer, switches, NAS , DVRs ,Control Box etc.
- See more on Amazon...
Brand: Wathai | Manufacturer: Wathai
Dimensions: 1.57 x 1.57 x 0.79 inches
See On Amazon #15
HiLetgo 4pcs DC 12V 4010 Fan 3Pin Computer CPU Cooler Mini Cooling Fan 40x40x10mm Small Exhaust Fan for Ender 3 CR10 3D Printer
Asin: B00LSG565O | Model: 3-01-0186 | PartNumber: 3-01-0186 | Ean: 0702082654989 | UPC: 702082654989
Rated Voltage: 12V.
The Yellow Line Is No Function And Cannot Adjust The Fan Speed.
40Mm X40mm X10mm.
Noise Reference: 18Db.
Features
- HiLetgo 4010S Cooling Fan Brushless DC Cooling Fan
- Noise Reference: 18DB
- Rated voltage: 12V
- 40mm x40mm x10mm
- The yellow line is no function and cannot adjust the fan speed
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 1.57 x 1.57 x 0.39 inches | Weight: 0.02 Pounds
See On Amazon #16
WINSINN 35mm Fan 5V, 3D Printer Micro 5 Volt Fans 3510 Dual Ball Bearing, Brushless Cooling 35mmx10mm 2PIN (Pack of 2Pcs)
Asin: B08R9M8H5F | Model: 2PFAN35105D | PartNumber: 2PFAN35105D | Ean: 0750081894332 | UPC: 750081894332
✔️Rated Voltage: Dc 5V, Current: 0.23A, Power: 1.15W, Speed: 7500Prm, Air Pressure: 3.0Mmh₂o, Airflow: 6.13Cfm, Noise: 23Dba.
✔️Packing List: 2 X 35Mm Fan 5V - Dual Ball Bearing, Connector & Line Length: Xh2.54 – 11.8In(300Mm), Size: 35Mm X 35Mm X 10Mm.
✔️Widely Used: Suitable For Ventilation Of Small Pc Case / Router / Raspberry Pi / Tv Box / Vr Glasses And Any Small Electronic Equipment Cooling Ventilation..
✔️High Quality Dual Ball Bearings, 5-Years Warranty. Balance Between High Air Volume And Low Noise, Suitable For 24 Hours / Day Long-Term Work, Long Life: 50,000 Hours..
Features
- WINSINN 35mm fan 5V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- Rated Voltage: DC 5V, Current: 0.23A, Power: 1.15W, Speed: 7500PRM, Air Pressure: 3.0mmH O, Airflow: 6.13CFM, Noise: 23dBA
- Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- Packing List: 2 x 35mm Fan 5v - Dual Ball Bearing, Connector & Line length: XH2.54 11.8in(300mm), Size: 35mm x 35mm x 10mm
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN
Dimensions: 0.39 x 1.38 x 1.38 Inches
See On Amazon #17
WINSINN 30mm Fan 5V, 3D Printer Micro 5 Volt Fans 3010 Dual Ball Bearing, Brushless Cooling 30mmx10mm 2PIN (Pack of 2Pcs)
Asin: B08R9HFXTN | Model: 2PFAN30105D | PartNumber: 2PFAN30105D | Ean: 0750081894066 | UPC: 750081894066
✔️Rated Voltage: Dc 5V, Current: 0.126A, Power: 0.63W, Speed: 9000Prm, Air Pressure: 6.86Mmh₂o, Airflow: 4.35Cfm, Noise: 25Dba.
✔️Packing List: 2 X 30Mm Fan 5V - Dual Ball Bearing, Connector & Line Length: Xh2.54 – 11.8In(300Mm), Size: 30Mm X 30Mm X 10Mm.
✔️Widely Used: Suitable For Ventilation Of Small Pc Case / Router / Raspberry Pi / Tv Box / Vr Glasses And Any Small Electronic Equipment Cooling Ventilation..
✔️High Quality Dual Ball Bearings, 5-Years Warranty. Balance Between High Air Volume And Low Noise, Suitable For 24 Hours / Day Long-Term Work, Long Life: 50,000 Hours..
Features
- WINSINN 30mm fan 5V which micro size and lightweight design, suitable for 3D printer / Raspberry pi or any DIY cooling and narrow place.
- High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- Rated Voltage: DC 5V, Current: 0.126A, Power: 0.63W, Speed: 9000PRM, Air Pressure: 6.86mmH O, Airflow: 4.35CFM, Noise: 25dBA
- Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- Packing List: 2 x 30mm Fan 5v - Dual Ball Bearing, Connector & Line length: XH2.54 11.8in(300mm), Size: 30mm x 30mm x 10mm
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN
Dimensions: 0.39 x 1.18 x 1.18 Inches
See On Amazon #18
2packs 30mm x 30mm x 10mm 3010 12V 0.15A Ball Bearing Brushless DC Cooling Fan 2pin
Asin: B072L3WC22 | Model: AB3010M12 | PartNumber: AB3010M12 | Ean: 0602638273001 | UPC: 602638273001
Connector: 2 Terminal Connector With 2Pin-Xh2.54Mm.
Ul Tuv Approved Certification. Warranty: 1 Year And Lifetime Support..
Dc Brushless Cooling Fan, Rated Voltage: Dc 12V, Current: 0.09A;.
Package Content : 2 X Dc Brushless Cooling Fan;.
Features
- Bearing Type: Ball Bearing, Speed: 9000 RPM, Air Flow : 3.53 CFM;
- Package Content : 2 x DC Brushless Cooling Fan;
- Connector: 2 Terminal Connector with 2pin-xh2.54mm
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.09A;
- UL TUV approved certification. Warranty: 1 year and lifetime support.
- See more on Amazon...
Brand: Security-01 | Manufacturer: Security-01
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.00 pounds
See On Amazon #19
GBA-SZC 3010 Cooling Fan Low Noise 24V DC Brushless Fan Cooler 0.08A 30mm x 30mm x 10mm.(Pack of 2PCS) 24V
Asin: B09CQ14B76 | Model: 1 | PartNumber: 1 | Ean: 0792288857598 | UPC: 792288857598
High Quality Hydraulic Bearings, More Stable And Long Life, Suitable For Continuous Work. The Life Expectancy Is About 45,000 Hours..
Made Of High Quality Plastics With High End Bearings,For Days At High Speeds Without Hassle Or Concern..
The Brushless Case Cooling Fan Is A Great Replacement Item For Your All Metal Hotend Or Maybe A Small Cooling Fan For Your 3D Printer..
Low Noise.This Cooling Fan Will Not Make You Feel Uneasy During They Are Working..
Features
- Size:30mm*30mm*10mm(L*D*H).
- Low noise.This cooling fan will not make you feel uneasy during they are working.
- High quality Hydraulic bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
- The Brushless case Cooling Fan is a great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer.
- Made of high quality plastics with high end bearings,for days at high speeds without hassle or concern.
- See more on Amazon...
Brand: GBA-SZC | Manufacturer: GBA-SZC
See On Amazon
Looking For Something Else?
Search