Frontpage > Product > Active Equalizer, Current Voltage Balancer 4S 5A Active Equalizer Lithium Battery Pack Unit Energy C...

Active Equalizer, Current Voltage Balancer 4S 5A Active Equalizer Lithium Battery Pack Unit Energy Capacitor PCB, Power Converters

Asin: B0CJMKRS87   |   Model: Hilitandtpk92r6q30   |   PartNumber: Hilitandtpk92r6q30


As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

Trigger Dual Mode: Active Balance Board Has Automatic Or Manual Trigger Dual Mode, Manual Forced Balance Timing Off Function, Easy To Use.
Guaranteed Minimum Voltage Difference: The Active Balance Board Adopts Nano-Amorphous Isolation Full Symmetrical Transformer, Which Can Ensure The Minimum Voltage Difference; Each String Of Input Overcurrent Resistance Can Ensure Safety.
Automatic Detection: The Active Balance Board Automatically Detects The Lowest Voltage Of The Battery, Stops Working When The Battery Is Low, And Protects The Battery From Power Failure.
Balanced And Automatic Work: Ultra-Low Internal Resistance Mos Devices Constitute An Ultra-Low Dynamic Impedance Inverter Circuit To Achieve High-Power Balance Work; Intelligent Mcu Chip Master Control Management Can Achieve Automatic And Autonomous Balance Work.

Features

  • Heat dissipation design: The heat dissipation design of the inverter in the extreme balance state of high pressure difference, the equalization method adopts the parallel energy transfer method, which is very reliable
  • Balanced and automatic work: Ultra-low internal resistance MOS devices constitute an ultra-low dynamic impedance inverter circuit to achieve high-power balance work; intelligent MCU chip master control management can achieve automatic and autonomous balance work
  • Trigger dual mode: Active balance board has automatic or manual trigger dual mode, manual forced balance timing off function, easy to use
  • Automatic detection: The active balance board automatically detects the lowest voltage of the battery, stops working when the battery is low, and protects the battery from power failure
  • Guaranteed minimum voltage difference: The active balance board adopts nano-amorphous isolation full symmetrical transformer, which can ensure the minimum voltage difference; each string of input overcurrent resistance can ensure safety
  • See more on Amazon...

Brand: Hilitand   |   Manufacturer: Hilitand

Amazon Price: $20.33 | as of 05/14/2024 (1:06pm pst) *DETAILS
Availability: Usually ships within 6 to 7 days

See On Amazon




Similar To Active Equalizer Current Voltage Balancer

  #1

Smart Active Equalizer Balancer, Battery Equalizer Balancer with Wide Application, Super Capacitor Voltage Detection Function for Lithium Iron Batteries (US Plug)

Asin: B0CZ9QT4PD   |   Model: Yunseitybt428oskgr-11   |   PartNumber: Yunseitybt428oskgr-11

Suitable For 2 To 24 String Battery Packs: The Equalizer Is Suitable For 2 To 24 String Battery Packs With Voltage Acquisition And Equalization Functions. The Equalizer Works With A Continuous 15A Equalization Current To Transfer Energy Without Depending On The Voltage Difference Of Series Cells In The Battery Pack. The Voltage Acquisition Range Is 1. 5V To 4. 5V, And The Accuracy Is 1Mv. It Is Suitable For The Mainstream Ternary Lithium Battery, Lithium Iron Battery And Lithium Titana.
Super Capacitor: This Equalizer Uses Super Capacitor As The Medium, Which Allows Active Energy Transfer Equalization..
Communication Function: This Equalizer Has Communication Function And Comes With Mobile App Software. You Can Connect The Equalizer Via To Check The Single Battery Voltage, Check The Equalization Status, Modify The Setting Parameters And Other Operations..
Wide Application: This Equalizer Can Be Applied To The Battery Pack Of Small Sightseeing Cars, Commuting Cars, Shared Cars, High Power Energy Storage, Base Station Backup Power, Solar Power Stations, Etc. It Can Also Be Used For Battery Equalization Maintenance, Repair, Etc..

Features

  • Balance Management System: Intelligent Active Balancer is a balance management system tailored for high capacity series battery packs.
  • Wide Application: This equalizer can be applied to the battery pack of small sightseeing cars, commuting cars, shared cars, high power energy storage, base station backup power, solar power stations, etc. It can also be used for battery equalization maintenance, repair, etc.
  • Suitable For 2 To 24 String Battery Packs: The equalizer is suitable for 2 to 24 string battery packs with voltage acquisition and equalization functions. The equalizer works with a continuous 15A equalization current to transfer energy without depending on the voltage difference of series cells in the battery pack. The voltage acquisition range is 1. 5V to 4. 5V, and the accuracy is 1mV. It is suitable for the mainstream ternary lithium battery, lithium iron battery and lithium titana
  • Communication Function: This equalizer has communication function and comes with mobile APP software. You can connect the equalizer via to check the single battery voltage, check the equalization status, modify the setting parameters and other operations.
  • Super Capacitor: This equalizer uses super capacitor as the medium, which allows active energy transfer equalization.
  • See more on Amazon...

Brand: Yunseity   |   Manufacturer: Yunseity

Amazon Price: $436.50 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #2

3S 4S 5A Active Equalizer Whole Group Balancer Lifepo4 Lipo Lto Lithium Active Battery Energy Transfer Equalization Capacitor + Protective Case

Asin: B09QKWH6RL   |   Model: 3S 4S   |   PartNumber: 3S 4S   |   Ean: 0602262884062   |   UPC: 602262884062

[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery.With A Protective Case, It Can Better Protect 3S 4S 5A Active Equalizer And Extend Product Life..
[Satisfactory Service]:Protective Case Needs To Be Assembled By Yourself, We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current.Voltage Is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300Ah..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..

Features

  • [Product Information]: Protective Case needs to be assembled by yourself,After the assembly is completed, tear off the outer yellow film.Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.Model:3S-4S Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate).
  • [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
  • [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.With a protective case, it can better protect 3S 4S 5A Active Equalizer and Extend product life.
  • [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
  • [Satisfactory service]:Protective Case needs to be assembled by yourself, We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
  • See more on Amazon...

Brand: Cywhrvzsf   |   Manufacturer: Cywhrvzsf

Amazon Price: $25.99 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #3

3S 4S 12V 5A Battery Active Equalizer BMS Balancer Lipo Li-ion LFP LiFePO4 Lithium Battery Balance Active Energy Transfer Equalization Module Faster Whole Group Capacitor Balancer PCB

Asin: B096NLHXPF   |   Model: JW-CAP-Balancer-4S   |   PartNumber: JW-CAP-Balancer-4S   |   Ean: 0723258876141   |   UPC: 723258876141

The Quiescent Current Is About 9Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer. High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers..
【Note】: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board. Tips: This Balancer Board Is Backward Compatible By Default. Eg. If It Is Used For 3S, The Last Line B4+ Is Empty..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb. Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.

Features

  • Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. NOTE Tips Well tested by the manufacturer. As long as the wiring is correct, the product guarantees long-lasting and effective performance. Of course, if customers have any questions, they can take the initiative to contact us, we are absolutely capable of providing more professional answers, rather than a direct refund returns.
  • Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
  • The quiescent current is about 9mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer. High-capacity batteries can be connected in parallel with multiple equalizers.
  • With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
  • NOTE : Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips: This balancer board is backward compatible by default. eg. If it is used for 3S, the last line B4+ is empty.
  • See more on Amazon...

Brand: QINIZX   |   Manufacturer: QINIZX

Dimensions: 0.63 x 2.61 x 1.80 inches

Warranty: Manufacturer warranty for 90 days from date of purchase.

Amazon Price: $24.38 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #4

5A 3S 4S 12V Battery Active Equalizer Whole Group Balancer LiFePO4 LFP Lipo Li-ion Lithium Active Battery Energy Transfer Equalization Capacitor Balancer PCB Module with Acrylic Protective Case

Asin: B0BBRNF823   |   Model: JWCABalancer-4S   |   PartNumber: JWCABalancer-4S   |   Ean: 0789513999000   |   UPC: 789513999000

The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.

Features

  • Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty. (Note: The default protective case is a kit, not assembled, the transparent acrylic case has a yellow protective film that can be peeled off. )
  • Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
  • The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
  • With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
  • Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
  • See more on Amazon...

Brand: XFYBZN   |   Manufacturer: XFYBZN

Dimensions: 0.63 x 2.60 x 1.80 inches   |   Weight: 0.22 pounds

Warranty: Manufacturer warranty for 90 days from date of purchase.

Amazon Price: $26.99 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #5

BMS Battery Equalizer Balancer JK Smart BMS 1A 2A Active Balance 4S 8S 16S 20S 24S 60A 100A 150A 200A 12V 24V for Camping Power Bank Lifepo4 Battery (Color : JK-B2A24S20P, Size : 3.2V)

Asin: B0CMCX9WXW   |   Model: ANTBEE   |   PartNumber: ANTBEE   |   Ean: 7366667184846

🔋【Own Development App】Jk Bms Has Its App For More Bms Settings And With Bluetooth Communication, The Battery's Real-Time Status Can Be Displayed Precisely On Your Phone..
🔋【Use Safety】Unique Design Choosing The Correct Protection Board And Applying It Appropriately Is Vital To The Longevity Your Batteries.
🔋【Widely Use】Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A Max Current Lifepo4 Battery System, And 0.6-2A Active Balance Current, Will Be The Perfect Choice For Your Diy System..
🔋【Full Functionality】Jk Bms Protects Against Over-Charge/Over-Discharge/Over-Current And Short Circuit, Low Temperature Charging Cutoff..

Features

  • JK Active Balance JK Smart active balance the voltage differences between the battery cells, raising the battery usage efficiency to 95%, providing the battery a longer life.
  • Full Functionality JK BMS protects against over-charge/over-discharge/over-current and short circuit, low temperature charging cutoff.
  • Own Development APP JK BMS has its APP for more BMS settings and with Bluetooth communication, the battery's real-time status can be displayed precisely on your phone.
  • Widely Use Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A max current lifepo4 battery system, and 0.6-2A active balance current, will be the perfect choice for your DIY system.
  • USE SAFETY UNIQUE DESIGN Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries
  • See more on Amazon...

Brand: ANTBEE   |   Manufacturer: ANTBEE

Weight: 1.10 pounds

Warranty: No warranty.

Amazon Price: $266.50 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #6

Walfront Battery Active Equalizer Balancer Board Universal Energy Transfer Balancer 12 16S for LTO LPO LFP 1.8V 4.5V

Asin: B09RX1GR4R   |   Model: Walfront0ghzkvoens6419   |   PartNumber: Walfront0ghzkvoens6419

Working Current: Balance Current 0‑5.5A, The More Balanced The Smaller The Current, And The Sleep Mode Current Is Less Than 0.1Ma..
Applicable Battery: The Quiescent Current Is About 12Ma, Recommended To Use Battery With A Capacity Of 60‑300Ah..
Working Voltage: The Working Voltage Is 1.8V‑4.5V, The Balance Voltage Accuracy Is Within 5Mv, With High Efficiency..
High Performance: Adopt New Ultra Low Internal Resistance Mos, And 2Oz Copper Thickness Pcb, Stable In Transmission..

Features

  • EASY OPERATION: Connect the lithium battery balance board to the top of the battery to start the balance work.
  • HIGH PERFORMANCE: Adopt new ultra low internal resistance MOS, and 2oz copper thickness PCB, stable in transmission.
  • WORKING CURRENT: Balance current 0 5.5A, the more balanced the smaller the current, and the sleep mode current is less than 0.1mA.
  • WORKING VOLTAGE: The working voltage is 1.8V 4.5V, the balance voltage accuracy is within 5mv, with high efficiency.
  • APPLICABLE BATTERY: The quiescent current is about 12mA, recommended to use battery with a capacity of 60 300AH.
  • See more on Amazon...

Brand: Walfront   |   Manufacturer: Walfront

Amazon Price: $44.56 | as of 05/14/2024 (1:06pm pst) *DETAILS
List Price: $49.80

See On Amazon




  #7

4S Li-ion Lipo Lifepo4 LFP Lithium Battery Active Equalizer Balancer BMS 1.2A Balance Energy Transfer Board Inductance Balancing Protection PCB

Asin: B09MSDRCG8   |   Model: JWinbalancer-4S   |   PartNumber: JWinbalancer-4S   |   Ean: 0721927465894   |   UPC: 721927465894

Balance Method: Detect That The Voltage Difference Between Adjacent Batteries Is Greater Than 0.1V To Trigger The Start Of Equalization, And The Adjacent Battery Voltage Difference Is Less Than 0.03V To Stop Working, The Board Enters Under-Voltage Protection Dormant State..
Balance Indication: 1) When The Equalization Light Is On, The Equalization Work Is Turned On; 2)The Equalization Light Goes Out, The Equalization Circuit Sleeps; 3)The Equalization Light Flashes, It Drop Cells, Or The Circuit Is Faulty..
Voltage Balance Accuracy: 30Mv (Typical Value) Between Adjacent Voltages; Balance Current: 0.1V Voltage Difference 0.5A-0.7A Balance Current, The Maximum Balance Current Is 1.2A When The Voltage Difference Is Above 0.2V. The Smaller The Voltage Difference Between Adjacent Batteries, The Smaller The Equalizing Current..
Applicable Battery Type: Ncm(Li-Ion)/Lfp, Not Support Lto; Single Voltage Working Range: 2.0V-4.5V; Static Working Current: 0.01Ma; Suggested Battery Capacity: Below 30Ah, If More Than 30Ah, Pls Choice High Efficiency Flying Capacitance Equalization, Search "B09ms8z58h" To Purchase..

Features

  • NOTE: Not recommended to be compatible with low strings, The indicator light will flash and report an error. Before connecting the equalization board, be sure to check whether each battery is wired correctly, and do a good job of insulation. otherwise it will short-circuit and burn the board. If Buyer short-circuits and burns the board, Buyer needs to bear the responsibility instead of returning it. Thank you for acting with conscience.
  • Applicable battery type: NCM(Li-ion)/LFP, NOT support LTO; Single voltage working range: 2.0V-4.5V; Static working current: 0.01mA; Suggested battery capacity: below 30AH, If more than 30AH, pls choice high efficiency flying capacitance equalization, search B09MS8Z58H to purchase.
  • Balance method: Detect that the voltage difference between adjacent batteries is greater than 0.1V to trigger the start of equalization, and the adjacent battery voltage difference is less than 0.03V to stop working, the board enters under-voltage protection dormant state.
  • Voltage balance accuracy: 30mV (typical value) between adjacent voltages; Balance current: 0.1V voltage difference 0.5A-0.7A balance current, the maximum balance current is 1.2A when the voltage difference is above 0.2V. The smaller the voltage difference between adjacent batteries, the smaller the equalizing current.
  • Balance indication: 1) When the equalization light is on, the equalization work is turned on; 2)The equalization light goes out, the equalization circuit sleeps; 3)The equalization light flashes, it drop cells, or the circuit is faulty.
  • See more on Amazon...

Brand: XFYBZN   |   Manufacturer: XFYBZN

Dimensions: 0.25 x 2.16 x 0.90 inches

Warranty: 60-day warranty

Amazon Price: $11.99 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #8

BMS Battery Equalizer Balancer JK Smart BMS with 1A Active Balance BT APP RS485 CAN 2S-24S 40A-200A LiFePo4 Li-ion LTO Battery Pack (Color : B1A24S15P, Size : BMS)

Asin: B0CMCWVSX4   |   Model: ANTBEE   |   PartNumber: ANTBEE   |   Ean: 7366667142464

🔋【Own Development App】Jk Bms Has Its App For More Bms Settings And With Bluetooth Communication, The Battery's Real-Time Status Can Be Displayed Precisely On Your Phone..
🔋【Use Safety】Unique Design Choosing The Correct Protection Board And Applying It Appropriately Is Vital To The Longevity Your Batteries.
🔋【Widely Use】Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A Max Current Lifepo4 Battery System, And 0.6-2A Active Balance Current, Will Be The Perfect Choice For Your Diy System..
🔋【Full Functionality】Jk Bms Protects Against Over-Charge/Over-Discharge/Over-Current And Short Circuit, Low Temperature Charging Cutoff..

Features

  • JK Active Balance JK Smart active balance the voltage differences between the battery cells, raising the battery usage efficiency to 95%, providing the battery a longer life.
  • Full Functionality JK BMS protects against over-charge/over-discharge/over-current and short circuit, low temperature charging cutoff.
  • Own Development APP JK BMS has its APP for more BMS settings and with Bluetooth communication, the battery's real-time status can be displayed precisely on your phone.
  • Widely Use Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A max current lifepo4 battery system, and 0.6-2A active balance current, will be the perfect choice for your DIY system.
  • USE SAFETY UNIQUE DESIGN Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries
  • See more on Amazon...

Brand: ANTBEE   |   Manufacturer: ANTBEE

Weight: 1.10 pounds

Warranty: No Warranty

Amazon Price: $173.48 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #9

4A Active Equalizer 1mv Precision 8S 10S 14S 16S 20S 22S 24S 24V 48V Li-on Lifepo4 LTO Lithium Battery Capacitor Balancer with Docking Adapter

Asin: B0BNDXLBCN

[Protection Switch]:The Minimum Total Voltage Of The Battery Pack Is Greater Than 30V, The Undervoltage Hibernation Voltage Is 1.5-4.2V, The Static Working Current Is The Balance Of 10Ma, The Balance Of 25M, The Working Environment Temperature Is -20 Degrees To +55 Degrees, There Is No Need For External Power Supply, The Whole Battery Is Balanced By Internal Energy Transfer. Equalizing Capacitor Can Also Be Used In 3S 4S 5S 6S, But Requires The Addition Of An Additional Booster Power Supply..
[Satisfactory Service]: We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[3 Indicator Light]:Blue Bluetooth Status Indicator Steady On: The Bluetooth Connection Is Successful. Blinking: The Bluetooth Link Is Down. Red Fault Status Indicator Steady On, It Indicates An Internal Fault. The Battery Flicker Test Failed. Procedure Green The Working Status Indicator Is Steady On, Indicating That The Balance Is Complete. Flash And Balance Are Working..
[Capacitance Principle]:Cywhrvzsf Capacitive Energy Transfer Balance Board, Capacitor High Precision 1Mv, Point-To-Point Energy Transfer Balance, Patent Balanced Structure Flying Capacitor Method, Combining Point-To-Point Energy Transfer Algorithm To Achieve Efficient Balance, Maximum Balance Current 4A,App Custom Settings :1-4A, Due To The Use Of Constant Current Constant Voltage Technology, Balance Current And Battery Voltage Difference Has Nothing To Do..

Features

  • [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout. With Bluetooth mobile phone English APP function, you can contact us about app use and usage instructions.Model:8S-24S ,Suitable : Lithium Iron Phosphate,Lithium Titanate,NCM Ternary Polymer (NCM/LFP/LTO),Voltage is 1.0 V-4.5V.
  • [Capacitance Principle] Cywhrvzsf capacitive energy transfer balance board, capacitor high precision 1mv, point-to-point energy transfer balance, patent balanced structure flying capacitor method, combining point-to-point energy transfer algorithm to achieve efficient balance, maximum balance current 4A,APP custom Settings :1-4A, due to the use of constant current constant voltage technology, balance current and battery voltage difference has nothing to do.
  • [Protection Switch]:The minimum total voltage of the battery pack is greater than 30V, the undervoltage hibernation voltage is 1.5-4.2V, the static working current is the balance of 10mA, the balance of 25m, the working environment temperature is -20 degrees to +55 degrees, there is no need for external power supply, the whole battery is balanced by internal energy transfer. equalizing capacitor can also be used in 3S 4S 5S 6S, but requires the addition of an additional booster power supply.
  • [3 Indicator Light]:Blue Bluetooth status indicator Steady on: The Bluetooth connection is successful. Blinking: the Bluetooth link is down. Red Fault status indicator Steady on, it indicates an internal fault. The battery flicker test failed. Procedure Green The working status indicator is steady on, indicating that the balance is complete. Flash and balance are working.
  • [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
  • See more on Amazon...

Brand: Cywhrvzsf   |   Manufacturer: Equalizer

Dimensions: 1.00 x 3.00 x 4.00 inches

Amazon Price: $105.99 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #10

CHUNYE JK BMS Battery Equalizer JK Smart Active Balance BMS Board 7S-24S 200A 2A Balance Current with BT UART/RS485 for Lifepo4 Li-ion LTO Battery JK BMS Battery Protection Module

Asin: B0CZ3RYGCD   |   Model: CHUNYE   |   PartNumber: CHUNYE   |   Ean: 7350519690500

🔋【Full Functionality】Jk Bms Protects Against Over-Charge/Over-Discharge/Over-Current And Short Circuit, Low Temperature Charging Cutoff..
🔋【Use Safety】Unique Design Choosing The Correct Protection Board And Applying It Appropriately Is Vital To The Longevity Your Batteries..
🔋【Widely Use】Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A Max Current Lifepo4 Battery System, And 0.6-2A Active Balance Current, Will Be The Perfect Choice For Your Diy System..
🔋【Jk Active Balance】Jk Smart Active Balance The Voltage Differences Between The Battery Cells, Raising The Battery Usage Efficiency To 99%, Providing The Battery A Longer Life..

Features

  • JK Own Development APP JK BMS has its APP for more BMS settings and with BT communication, the battery's real-time status can be displayed precisely on your phone.
  • JK Active Balance JK Smart active balance the voltage differences between the battery cells, raising the battery usage efficiency to 99%, providing the battery a longer life.
  • Full Functionality JK BMS protects against over-charge/over-discharge/over-current and short circuit, low temperature charging cutoff.
  • Widely Use Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A max current lifepo4 battery system, and 0.6-2A active balance current, will be the perfect choice for your DIY system.
  • USE SAFETY UNIQUE DESIGN Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries.
  • See more on Amazon...

Brand: CHUNYE   |   Manufacturer: CHUNYE

Weight: 2.20 pounds

Warranty: No Warranty

Amazon Price: $227.72 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #11

3S 4S 5.5A Capacitor Active Equalizer Balancer Lifepo4 Lithium Lipo Battery Energy Transfer Active Equalization Whole Group Balancer

Asin: B09MS8Z58H   |   Model: JWCABalancer-4S   |   PartNumber: JWCABalancer-4S   |   Ean: 0721927465870   |   UPC: 721927465870

The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.

Features

  • Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty.
  • Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
  • The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
  • With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
  • Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
  • See more on Amazon...

Brand: XFYBZN   |   Manufacturer: XFYBZN

Dimensions: 1.33 x 3.63 x 3.05 Inches   |   Weight: 0.13 Pounds

Warranty: 60-day warranty

Amazon Price: $22.89 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #12

Hilitand Battery Active Equalizer, Balancer Energy Transfer Board Accessory Lithium Lipo Battery Energy Active Equalizer Fit Capacitor Silicone Cable for NCM LFP LTO(4S)

Asin: B09F3VH3QK

Practical Tool: No External Power Supply Is Required, And The Transfer Is Carried Out By Means Of The Internal Energy Transfer Of The Battery And The Balance Of The Entire Battery Pack..
Note: The Quiescent Current Is About 12 Ma, And It Is Recommended To Be Used For Batteries With A Battery Capacity Of 60‑300 Ah, Which Has Passed Strict Quality Control, You Can Use It With Confidence..
Great Performance: Using Ultra Low Internal Resistance Mos And Premium Printed Circuit Board, Ensuring Excellent Balance Effect. The Balance Accuracy Is 5Mv, The Sleep Current Is Less Than 0.1Ma, And The Efficiency Is Very High..
Product Brief: The Working Voltage Is 1.8V To 4.2V, And When It's Lower Than 3.0V, It Will Automatically Stop And Enter Dormant State. Suitable For Ncm Battery, Lfp Battery, Lto Battery..

Features

  • Premium Quality: This battery active equalizer suite for ternary lithium battery, lithium iron battery, and LTO battery. The working environment temperature of this battery active equalizer is from -10 to 60 .
  • Product Brief: The working voltage is 1.8V to 4.2V, and when it's lower than 3.0V, it will automatically stop and enter dormant state. Suitable for NCM battery, LFP battery, LTO battery.
  • Practical Tool: No external power supply is required, and the transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack.
  • Great Performance: Using ultra low internal resistance MOS and premium Printed Circuit Board, ensuring excellent balance effect. The balance accuracy is 5MV, the sleep current is less than 0.1mA, and the efficiency is very high.
  • Note: The quiescent current is about 12 mA, and it is recommended to be used for batteries with a battery capacity of 60 300 AH, which has passed strict quality control, you can use it with confidence.
  • See more on Amazon...

Brand: Hilitand   |   Manufacturer: Hilitand

Amazon Price: $17.66 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #13

Walfront Lithium Battery Balancer Balance Board Universal 12 to 16S Battery Active Equalizer Module for LTO LPO LFP 60 to 300AH Battery Capacity 1.8V to 4.5V

Asin: B09YSQNPJC

Working Current: Balance Current 0‑5.5A, The More Balanced The Smaller The Current, And The Sleep Mode Current Is Less Than 0.1Ma..
Applicable Battery: The Quiescent Current Is About 12Ma, Recommended To Use Battery With A Capacity Of 60‑300Ah..
Working Voltage: The Working Voltage Is 1.8V‑4.5V, The Balance Voltage Accuracy Is Within 5Mv, With High Efficiency..
High Performance: Adopt New Ultra Low Internal Resistance Mos, And 2Oz Copper Thickness Pcb, Stable In Transmission..

Features

  • EASY OPERATION: Connect the lithium battery balance board to the top of the battery to start the balance work.
  • HIGH PERFORMANCE: Adopt new ultra low internal resistance MOS, and 2oz copper thickness PCB, stable in transmission.
  • WORKING CURRENT: Balance current 0 5.5A, the more balanced the smaller the current, and the sleep mode current is less than 0.1mA.
  • WORKING VOLTAGE: The working voltage is 1.8V 4.5V, the balance voltage accuracy is within 5mv, with high efficiency.
  • APPLICABLE BATTERY: The quiescent current is about 12mA, recommended to use battery with a capacity of 60 300AH.
  • See more on Amazon...

Brand: Walfront   |   Manufacturer: Walfront

Amazon Price: $51.38 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #14

Universal Active Equalizer Module 12 16S PCB Lithium Battery Balance Board 1.8V 4.5V Current Voltage Balancer for LTO LPO LFP

Asin: B09S6PL4P6

Working Voltage: The Battery Cell Balancer Working Voltage Is 1.8V‑4.5V, The Balance Voltage Accuracy Is Within 5Mv, With High Efficiency.
Stable Transmission: Active Equalizer Balancer Adopts New Ultra Low Internal Resistance Mos, And 2Oz Copper Thickness Pcb, Stable In Transmission.
Easy Operation: Connect The Lithium Battery Balance Board To The Top Of The Battery To Start The Balance Work, Lithium Battery Active Equalizer Is Small In Size, Light In Weight, Easy To Carry And Use.
Applicable: The Quiescent Current Is About 12Ma, Recommended To Use Battery With A Capacity Of 60‑300Ah, Suitable For Li Ion Lifepo₄ Lto, Battery Type Is Ncm, Lfp, Lto.

Features

  • WORKING CURRENT: Battery balancer board balance current 0 5.5A, the more balanced the smaller the current, and the sleep mode current is less than 0.1mA, reduce the damage to the battery
  • APPLICABLE: The quiescent current is about 12mA, recommended to use battery with a capacity of 60 300AH, suitable for Li ion LiFePO LTO, battery type is NCM, LFP, LTO
  • WORKING VOLTAGE: The battery cell balancer working voltage is 1.8V 4.5V, the balance voltage accuracy is within 5mv, with high efficiency
  • EASY OPERATION: Connect the lithium battery balance board to the top of the battery to start the balance work, lithium battery active equalizer is small in size, light in weight, easy to carry and use
  • STABLE TRANSMISSION: Active equalizer balancer adopts new ultra low internal resistance MOS, and 2oz copper thickness PCB, stable in transmission
  • See more on Amazon...

Brand: LiebeWH   |   Manufacturer: LiebeWH

Dimensions: 1.18 x 6.69 x 5.51 inches   |   Weight: 0.56 pounds

Amazon Price: $41.18 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #15

4 to 24S 8A Battery Active Equalizer, Automatic Detection Active Balancer Lithium Battery Active Balance Board with Circuit Breaker Protection Device

Asin: B09YRJFQBX

Automatic And Manual Triggering: The Balancer Has Dual Modes Of Automatic And Manual Triggering, And You Can Manually Force The Balance Timing Off Function When You Need It.
High Power Balance: Active Equalizer Has High Power, And Mos Devices Form An Ultra-Low Dynamic Impedance Inverter Circuit To Achieve High Power Balance Work. When The High Voltage Difference Is Very Balanced, The Inverter Can Dissipate Heat, Prevent Damage To The Machine, And Reduce Harm.
Nano-Amorphous Isolation Fully Symmetrical Transformer: Active Balancer Guarantees The Minimum Voltage Difference, And Each String Of Input Overcurrent Resistors Ensures Safety, Ensuring The Safety Of The Entire Circuit..
Automatic Detection: This Equalizer Can Automatically Detect The Minimum Voltage Of The Battery, Stop Working When The Battery Is Low, Protect The Health Of The Battery And Increase The Battery Life..

Features

  • Circuit Breaker Protection Device: Battery active equalizer has a small circuit breaker device with overcurrent protection, which can control instantaneous abnormally large current, disconnect overtemperature, and protect the battery pack for normal and continuous balance
  • Automatic Detection: This equalizer can automatically detect the minimum voltage of the battery, stop working when the battery is low, protect the health of the battery and increase the battery life.
  • Automatic And Manual Triggering: The balancer has dual modes of automatic and manual triggering, and you can manually force the balance timing off function when you need it
  • Nano-Amorphous Isolation Fully Symmetrical Transformer: Active balancer guarantees the minimum voltage difference, and each string of input overcurrent resistors ensures safety, ensuring the safety of the entire circuit.
  • High Power Balance: Active equalizer has high power, and MOS devices form an ultra-low dynamic impedance inverter circuit to achieve high power balance work. When the high voltage difference is very balanced, the inverter can dissipate heat, prevent damage to the machine, and reduce harm
  • See more on Amazon...

Brand: Fafeicy   |   Manufacturer: Fafeicy

Amazon Price: $64.02 | as of 05/14/2024 (1:06pm pst) *DETAILS
List Price: $74.27

See On Amazon




  #16

FTVOGUE 1.8V 4.5V Lithium Battery Balance Board 12 16S Universal Battery Active Equalizer Module Battery Energy Transfer Board for LTO LPO LFP

Asin: B0BW9NS44T   |   Model: FTVOGUEtvkwf7nhoa   |   PartNumber: FTVOGUEtvkwf7nhoa

Working Current: Balance Current 0‑5.5A, The More Balanced The Smaller The Current, And The Sleep Mode Current Is Less Than 0.1Ma..
Working Voltage: The Working Voltage Is 1.8V‑4.5V, The Balance Voltage Accuracy Is Within 5Mv, With High Efficiency..
Applicable Battery: The Quiescent Current Is About 12Ma, Recommended To Use Battery With A Capacity Of 60‑300Ah..
High Performance: Adopt New Ultra Low Internal Resistance Mos, And 2Oz Copper Thickness Pcb, Stable In Transmission..

Features

  • EASY OPERATION: Connect the lithium battery balance board to the top of the battery to start the balance work.
  • HIGH PERFORMANCE: Adopt new ultra low internal resistance MOS, and 2oz copper thickness PCB, stable in transmission.
  • WORKING CURRENT: Balance current 0 5.5A, the more balanced the smaller the current, and the sleep mode current is less than 0.1mA.
  • APPLICABLE BATTERY: The quiescent current is about 12mA, recommended to use battery with a capacity of 60 300AH.
  • WORKING VOLTAGE: The working voltage is 1.8V 4.5V, the balance voltage accuracy is within 5mv, with high efficiency.
  • See more on Amazon...

Brand: FTVOGUE   |   Manufacturer: FTVOGUE

Amazon Price: $48.82 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #17

10S 32V 36V 42V 1.2A Li-ion Lipo Lifepo4 LFP Battery Active Equalizer BMS Balancer Inductive Balance Lithium Battery Energy Transfer Board (10S)

Asin: B09C3HLL7W   |   Model: InduBalce-10S   |   PartNumber: InduBalce-10S   |   Ean: 0048518727415   |   UPC: 048518727415

Applicable Battery Type: Ncm(Li-Ion)/Lfp, Not Support Lto; Single Voltage Working Range: 3.0V-4.2V; Suggested Battery Capacity: Below 30Ah, If More Than 30Ah, Pls Search Capacitor Faster Whole Group Balancer " B096nlhxpf " To Purchase. This Pcb Size About: 4.6X2.24X0.31Inch..
Voltage Balance Accuracy: 30Mv (Typical Value) Between Adjacent Voltages; Balance Current: 0.1V Voltage Difference 0.5A Balance Current, The Maximum Balance Current Is 1.2A When The Voltage Difference Is Above 0.2V. Static Working Current: 0.01Ma; Under-Voltage Protection Dormant Voltage: The Adjacent Voltage Difference Is Less Than 0.03V And Enters Dormant State..
Balance Method: Detect That The Voltage Difference Between Adjacent Batteries Is Greater Than 0.1V To Trigger The Start Of Equalization, And The Adjacent Battery Voltage Difference Is Less Than 0.03V To Stop Working. (Tips: The Inductance Equalization Board Needs To Be Charged/Discharged Many Times Before The Voltage Equalization Can Achieve A Better Effect.).
【Tips】: The Equalization Board Is Not A Bms Protection Board, It Is An Auxiliary To The Protection Board, So No Matter How Bad The Battery You Use To Test, It Can Be Used, But It Has No Overvoltage/Overdischarge Protection Function. Overvoltage/Overdischarge Is The Function Of The Bms Protection Board. If Voltage Protection Is Required, It Is Best To Use It In Parallel With The Bms Protection Board..

Features

  • NOTE : Not recommended to be compatible with low strings, The indicator light will flash and report an error. Before connecting the equalization board, be sure to check whether each battery is wired correctly, and do a good job of insulation. otherwise it will short-circuit and burn the board. Note that first contact the B- pin (The order must be: B-, B1,... B10) and insert it diagonally upwards, otherwise it may cause the board to burn out.
  • Tips : The equalization board is not a BMS protection board, it is an auxiliary to the protection board, so no matter how bad the battery you use to test, it can be used, But it has no overvoltage/overdischarge protection function. Overvoltage/overdischarge is the function of the BMS protection board. If voltage protection is required, it is best to use it in parallel with the BMS protection board.
  • Applicable battery type: NCM(Li-ion)/LFP, NOT support LTO; Single voltage working range: 3.0V-4.2V; Suggested battery capacity: below 30AH, If more than 30AH, pls search Capacitor Faster Whole Group Balancer B096NLHXPF to purchase. This PCB size about: 4.6x2.24x0.31inch.
  • Balance method: Detect that the voltage difference between adjacent batteries is greater than 0.1V to trigger the start of equalization, and the adjacent battery voltage difference is less than 0.03V to stop working. (Tips: The inductance equalization board needs to be charged/discharged many times before the voltage equalization can achieve a better effect.)
  • Voltage balance accuracy: 30mV (typical value) between adjacent voltages; Balance current: 0.1V voltage difference 0.5A balance current, the maximum balance current is 1.2A when the voltage difference is above 0.2V. Static working current: 0.01mA; Under-voltage protection dormant voltage: The adjacent voltage difference is less than 0.03V and enters dormant state.
  • See more on Amazon...

Brand: QINIZX   |   Manufacturer: QINIZX-JW

Dimensions: 0.31 x 4.60 x 2.24 Inches   |   Weight: 0.14 Pounds

Warranty: Manufacturer warranty for 90 days from date of purchase.

Amazon Price: $17.59 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #18

Active Equalizer Whole Group Balancer Lifepo4 Lipo Lithium Active Battery Energy Transfer Active Equalization Module for NCM LFP LTO (8S)

Asin: B0BS1G7KXF   |   Model: Hilitand26y4conpav-13   |   PartNumber: Hilitand26y4conpav-13

【Notice】 Before Connecting The Equalization Board, Check Whether Each Piece Of Wiring Is Correct, Insulation Between The Bottom Board And The Battery Connection Terminals Is Required To Prevent Burnout..
【Capacitance Principle】 No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
【With Sleep Protection】 The Working Voltage Is 1.8V To 4.2V. When The Voltage Is Lower Than 3.0V, It Will Automatically Stop And Enter The Dormant State, And The Standby Power Consumption Is Less Than 0.1Ma..
【Original Design】 Using The Original Ultra-Low Internal Resistance Mos, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..

Features

  • For NCM LFP LTO Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect. This active equalizer can be applied in ternary lithium battery, lithium iron battery, and LTO battery. Applicable Serial Number 5/6s 6/7s 7/8s.
  • Original Design Using the original ultra-low internal resistance MOS, equalizing current 0-5.5A, the more balanced the battery, the lower the current.
  • Notice Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.
  • With Sleep Protection The working voltage is 1.8V to 4.2V. When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA.
  • Capacitance Principle No external power supply is required,The working principle is Capacitor fit transfers the transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
  • See more on Amazon...

Brand: Hilitand   |   Manufacturer: Hilitand

Dimensions: 0.50 x 1.18 x 1.57 Inches

Amazon Price: $16.88 | as of 05/14/2024 (1:06pm pst) *DETAILS
List Price: $25.84

See On Amazon




  #19

Active Equalizer Balancer, Lithium Battery Cell Energy Transfer Board 4 Series 6A Equalization Board

Asin: B0BR8DBYBM   |   Model: Hilitandih6vn7y2zt   |   PartNumber: Hilitandih6vn7y2zt

【High Accurate】 The Price Is Lower Than Similar Capacitor Products, Which Keeps Each Battery Balanced And Prolongs The Service Life Of The Battery..
【Capacitance Principle】 No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
【Applicability】With Simple Indicating Switch, It Is Suitable For People With Weak Base To Operate. All Ternary Lithium Batteries And Iron Lithium Batteries Are Universal..
【Active Capacitance Balance】 Using A Specially Customized Control Chip, Does Not Detect The Pressure Difference/Designed To Work For A Long Time Without Shutting Down..

Features

  • Current The quiescent current is as low as 5mA, which can achieve a high accurate equalization of 5mV, and the equalization current is 2~6A (this refers to the limit current that the circuit board can withstand. In the case of small voltage difference or large internal resistance of the battery, the current is not so Big).
  • Active Capacitance Balance Using a specially customized control chip, does not detect the pressure difference/designed to work for a long time without shutting down.
  • High Accurate The price is lower than similar capacitor products, which keeps each battery balanced and prolongs the service life of the battery.
  • Applicability With simple indicating switch, it is suitable for people with weak base to operate. All ternary lithium batteries and iron lithium batteries are universal.
  • Capacitance Principle No external power supply is required,The working principle is Capacitor fit transfers the transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
  • See more on Amazon...

Brand: Hilitand   |   Manufacturer: Hilitand

Amazon Price: $12.97 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon




  #20

4S 5A 3S Active Equalizer Lifepo4 Lipo Lto Lithium Whole Group Balancer Active Battery Energy Transfer Equalization Capacitor

Asin: B0CCMSN14K

[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..
[Satisfactory Service]: Please Contact Us After Purchase, We Will Send You The Installation Program And Product Instruction Manual.We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack. The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery..

Features

  • [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout. Model:3S-4S Suitable : Lithium Iron Phosphate 3.2V , NCM Ternary Polymer(3.7V),(Not Fit Lithium Titanate) ,Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
  • [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.
  • [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.
  • [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack. the equalization board can be connected to the battery to start the equalization work.
  • [Satisfactory Service]: Please contact us after purchase, we will send you the installation program and product instruction manual.We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
  • See more on Amazon...

Brand: Cywhrvzsf   |   Manufacturer: Cywhrvzsf

Amazon Price: $22.99 | as of 05/14/2024 (1:06pm pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.