MECCANIXITY Heat Shrink End Cap 10mm ID x 30mm L 2:1 Waterproof Electrical Wire Wrap Adhesive Lined Sealed Heat Shrink Tubing Caps for Wire Cable, Pack of 10
Asin: B0CKW66HVP
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Using Temperature-Resistant And Flame-Retardant Materials, It Is Security And Reliable, Has Strong Chemical Corrosion Resistance, And Has Good Heat Resistance And Insulation. 2:1 Shrinkage, The Hot-Melt Adhesive Inner Layer Provides Airtight Protection And Easy And Convenient Installation On Cable Terminations. The Spiral Melt Adhesive In The Inner Layer Of The Heat-Shrinkable Cable Cap Has Good Flexibility After Shrinkage..
Please Allow 3-5Mm Product Tolerance..
Put A Heat-Shrinkable Cable Gland Over The Outer Protective Layer At The End Of The Cable. Heat The Heat-Shrinkable Cable Gland So That It Shrinks Around The End Of The Cable. The Heating Temperature Needs To Be Controlled Well. Stop Heating When The Shrinkage Is In Place And The Glue Over-Flows..
Shrink Ratio: 2:1; Rated Voltage: 35Kv; Operating Temperature: -55°C~125°C; Initial Shrink Temperature: 80°C; Complete Shrink Temperature: 120°C; Size: 10 X 30Mm / 0.39 X 1.18 Inch (Id*L).
Features
- The cable heat shrink sealing cap is internally coated with hot melt adhesive, and the cable sealing cap can shrink when heated, The cable sealing cap will be tightly bonded to the surface of the cable after the glue melts. Provide sealing, waterproofing, insulation, and protection effects for electricity and control cable terminals.
- Shrink Ratio: 2:1; Rated Voltage: 35KV; Operating Temperature: -55 C~125 C; Initial Shrink Temperature: 80 C; Complete Shrink Temperature: 120 C; Size: 10 x 30mm / 0.39 x 1.18 inch (ID*L)
- Using temperature-resistant and flame-retardant materials, it is security and reliable, has strong chemical corrosion resistance, and has good heat resistance and insulation. 2:1 shrinkage, the hot-melt adhesive inner layer provides airtight protection and easy and convenient installation on cable terminations. The spiral melt adhesive in the inner layer of the heat-shrinkable cable cap has good flexibility after shrinkage.
- Put a heat-shrinkable cable gland over the outer protective layer at the end of the cable. Heat the heat-shrinkable cable gland so that it shrinks around the end of the cable. The heating temperature needs to be controlled well. Stop heating when the shrinkage is in place and the glue over-flows.
- Please allow 3-5mm product tolerance.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY Heat Shrink End Cap
#1
Domecka 200PCS Waterproof Heat Shrink End Caps tubing, Electrical Wire Cable Wrap Marine Grade Sealed Heat shrinkable tubing, Adhesive Lined Tube Insulation Seal Heat-shrinkable Cap Tubes Kit with Box
Asin: B091TM4B29 | Model: DM-F200 | PartNumber: DM-F200 | Ean: 6969023298259
The End Caps Tubing Is Used To Connect The Ends Of Multiple Wires. It Contains A Lot Of Glue. It Can Completely Wrap The Wires After The Glue Overflows After Heating With A Hot Air Gun. It Has A Strong Airtightness And Can Be Professionally Connected In A Few Seconds..
Friendly After-Service - We Have A Commitment To Every Buyer 100% Satisfaction. Please Don't Hesitate To Contact Us If You Are Not Satisfied With Your Purchase. We Would Try Our Best To Assist You And Ensure Your Satisfaction.
The Heat-Shrinkable Cap Made Of High-Quality Polyolefin Material Has The Advantages Of Good Electrical Insulation, High Strength And Toughness, Good Sealing And Corrosion Resistance, High Temperature Resistance, Not Easy To Break And Long Service Life..
Features
- This combination has three sizes of end caps tube heat shrinkable tube for you to choose from. The heat shrinkable tube is lined with insulating glue, which has good electrical insulation, good sealing, corrosion resistance and high temperature resistance.
- The heat-shrinkable cap made of high-quality polyolefin material has the advantages of good electrical insulation, high strength and toughness, good sealing and corrosion resistance, high temperature resistance, not easy to break and long service life.
- The end caps tubing is used to connect the ends of multiple wires. It contains a lot of glue. It can completely wrap the wires after the glue overflows after heating with a hot air gun. It has a strong airtightness and can be professionally connected in a few seconds.
- Friendly after-service - We have a commitment to every buyer 100% satisfaction. Please don't hesitate to contact us if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction
- See more on Amazon...
Brand: Domecka
Dimensions: 1.37 x 7.67 x 5.11 inches
See On Amazon #2
BuyHeatShrink 2 INCH Heat Shrink END Cap for 1.5" Rope
Asin: B00FDVE3GI
Hot Melt Glue On The Inside.
Use A Heat Gun, Not A Hairdryer.
Start Shrinking From The Closed End And Work Your Way Out.
You Will Get A Pair (2) Of End Caps.
Features
- 2" heat shrink end cap will shrink down as far as 1"
- You will get a pair (2) of end caps
- hot melt glue on the inside
- Start shrinking from the closed end and work your way out
- use a Heat gun, not a hairdryer
- See more on Amazon...
Brand: BuyHeatShrink | Manufacturer: BuyHeatShrink
See On Amazon #3
uxcell Heat Shrink Tubing, 13mm Dia 21mm Flat Width 2:1 Heat Shrink Wrap Cable Sleeve Heat Shrink Tube 10m Black
Asin: B07FVT8NNB | Model: a18060900ux0228 | PartNumber: a18060900ux0228
Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius Maximum..
Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & More..
Heat Shrink Tubing Is Good Useful, Of The Specification Of Good Electrical Insulation, Corrosion Resistance And High Temperature Resistance..
Operating Temperature: -55 To 125 Degree Celsius.
Features
- Diameter(Before Shrinking): 13mm / 0.51"; Flat Width: 21mm / 0.83" ; Length(approx.): 10M / 32.8ft; Shrink rate: 2:1.
- Operating Temperature: -55 to 125 Degree Celsius
- Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.
- Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance.
- Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.09 x 3.94 inches
See On Amazon #4
MECCANIXITY Heat Shrink End Cap 10mm ID x 30mm L 2:1 Waterproof Electrical Wire Wrap Adhesive Lined Sealed Heat Shrink Tubing Caps for Wire Cable, Pack of 50
Asin: B0CKW65X8B
Using Temperature-Resistant And Flame-Retardant Materials, It Is Security And Reliable, Has Strong Chemical Corrosion Resistance, And Has Good Heat Resistance And Insulation. 2:1 Shrinkage, The Hot-Melt Adhesive Inner Layer Provides Airtight Protection And Easy And Convenient Installation On Cable Terminations. The Spiral Melt Adhesive In The Inner Layer Of The Heat-Shrinkable Cable Cap Has Good Flexibility After Shrinkage..
Please Allow 3-5Mm Product Tolerance..
Put A Heat-Shrinkable Cable Gland Over The Outer Protective Layer At The End Of The Cable. Heat The Heat-Shrinkable Cable Gland So That It Shrinks Around The End Of The Cable. The Heating Temperature Needs To Be Controlled Well. Stop Heating When The Shrinkage Is In Place And The Glue Over-Flows..
Shrink Ratio: 2:1; Rated Voltage: 35Kv; Operating Temperature: -55°C~125°C; Initial Shrink Temperature: 80°C; Complete Shrink Temperature: 120°C; Size: 10 X 30Mm / 0.39 X 1.18 Inch (Id*L).
Features
- The cable heat shrink sealing cap is internally coated with hot melt adhesive, and the cable sealing cap can shrink when heated, The cable sealing cap will be tightly bonded to the surface of the cable after the glue melts. Provide sealing, waterproofing, insulation, and protection effects for electricity and control cable terminals.
- Shrink Ratio: 2:1; Rated Voltage: 35KV; Operating Temperature: -55 C~125 C; Initial Shrink Temperature: 80 C; Complete Shrink Temperature: 120 C; Size: 10 x 30mm / 0.39 x 1.18 inch (ID*L)
- Using temperature-resistant and flame-retardant materials, it is security and reliable, has strong chemical corrosion resistance, and has good heat resistance and insulation. 2:1 shrinkage, the hot-melt adhesive inner layer provides airtight protection and easy and convenient installation on cable terminations. The spiral melt adhesive in the inner layer of the heat-shrinkable cable cap has good flexibility after shrinkage.
- Put a heat-shrinkable cable gland over the outer protective layer at the end of the cable. Heat the heat-shrinkable cable gland so that it shrinks around the end of the cable. The heating temperature needs to be controlled well. Stop heating when the shrinkage is in place and the glue over-flows.
- Please allow 3-5mm product tolerance.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #5
Domecka 420PCS Waterproof Heat Shrink End Caps Tubing, Wire Shrink Wrap Tubing, Electrical Wire Cable Wrap Marine Grade Sealed Heat Shrinkable Tubing, Adhesive Lined Tube Seal Heat-shrinkable Cap
Asin: B09JC5WFNV | Ean: 6969023298051
The End Caps Tubing Is Used To Connect The Ends Of Multiple Wires. It Contains A Lot Of Glue. It Can Completely Wrap The Wires After The Glue Overflows After Heating With A Hot Air Gun. It Has A Strong Airtightness And Can Be Professionally Connected In A Few Seconds..
Friendly After-Service - We Have A Commitment To Every Buyer 100% Satisfaction. Please Don't Hesitate To Contact Us If You Are Not Satisfied With Your Purchase. We Would Try Our Best To Assist You And Ensure Your Satisfaction.
This Kit Box Combination Is Equipped With More Large-Size Heat Shrinkable End Caps To Make It Easier For Your Wires To Connect. There Are 210 Pcs Of End Caps With An Inner Diameter Of 0.24 Inches, 150 Pcs Of End Caps With An Inner Diameter Of 0.32 Inches And 60 Pcs Of End Caps With An Inner Diameter Of 0.44 Inches,.
The Heat-Shrinkable Cap Made Of High-Quality Polyolefin Material Has The Advantages Of Good Electrical Insulation, High Strength And Toughness, Good Sealing And Corrosion Resistance, High Temperature Resistance, Not Easy To Break And Long Service Life..
Features
- This combination has three sizes of end caps tube heat shrinkable tube for you to choose from. The heat shrinkable tube is lined with insulating glue, which has good electrical insulation, good sealing, corrosion resistance and high temperature resistance
- The heat-shrinkable cap made of high-quality polyolefin material has the advantages of good electrical insulation, high strength and toughness, good sealing and corrosion resistance, high temperature resistance, not easy to break and long service life.
- The end caps tubing is used to connect the ends of multiple wires. It contains a lot of glue. It can completely wrap the wires after the glue overflows after heating with a hot air gun. It has a strong airtightness and can be professionally connected in a few seconds.
- This kit box combination is equipped with more large-size heat shrinkable end caps to make it easier for your wires to connect. There are 210 pcs of end caps with an inner diameter of 0.24 inches, 150 pcs of end caps with an inner diameter of 0.32 inches and 60 pcs of end caps with an inner diameter of 0.44 inches,
- Friendly after-service - We have a commitment to every buyer 100% satisfaction. Please don't hesitate to contact us if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction
- See more on Amazon...
Brand: Domecka | Manufacturer: Domecka
See On Amazon #6
MECCANIXITY 15Pcs Heat Shrink End Cap 8mm ID x 36mm L 3:1 Ratio Heat Shrink Tubing Caps Lined Sealed Waterproof Adhesive for Electrical Wire Cable, Red
Asin: B0CTMGYK45
Using Temperature-Resistant And Flame-Retardant Materials, It Is Secure And Reliable, Has Strong Chemical Corrosion Resistance, And Has Good Heat Resistance And Insulation. 3:1 Shrinkage, The Hot-Melt Adhesive Inner Layer Provides Airtight Protection And Easy And Convenient Installation On Cable Terminations. Provide Sealing, Waterproofing, Insulation, And Protection Effects For Electricity And Control Cable Terminals..
Please Allow Slight Errors Due To Manual Measurement..
1. Put A Heat-Shrinkable Cable Gland Over The Outer Protective Layer At The End Of The Cable. 2. Heat The Heat-Shrinkable Cable Gland So That It Shrinks Around The End Of The Cable. 3. The Heating Temperature Needs To Be Controlled Well. Stop Heating When The Shrinkage Is In Place And The Glue Over-Flows..
Size: 8 X 36Mm/0.31 X 1.42 Inch (Id*L); Outer Diameter: 9Mm/0.35 Inch; Shrink Ratio: 3:1; Shrink Temperature: 80℃~120℃; Material: Po; In The Package Of: 15Pcs X Heat Shrink End Caps.
Features
- The spiral melt adhesive in the inner layer of the heat-shrinkable cable cap has good flexibility after shrinkage. It can provide moisture-proof sealing protection for outdoor and underground PVC, or other cables, power communications, and lighting line terminals.
- Size: 8 x 36mm/0.31 x 1.42 inch (ID*L); Outer Diameter: 9mm/0.35 inch; Shrink Ratio: 3:1; Shrink Temperature: 80 ~120 ; Material: PO; In the package of: 15pcs x Heat Shrink End Caps
- Using temperature-resistant and flame-retardant materials, it is secure and reliable, has strong chemical corrosion resistance, and has good heat resistance and insulation. 3:1 shrinkage, the hot-melt adhesive inner layer provides airtight protection and easy and convenient installation on cable terminations. Provide sealing, waterproofing, insulation, and protection effects for electricity and control cable terminals.
- 1. Put a heat-shrinkable cable gland over the outer protective layer at the end of the cable. 2. Heat the heat-shrinkable cable gland so that it shrinks around the end of the cable. 3. The heating temperature needs to be controlled well. Stop heating when the shrinkage is in place and the glue over-flows.
- Please allow slight errors due to manual measurement.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #7
uxcell Heat Shrink Tubing, 10mm Dia 16mm Flat Width 2:1 Heat Shrink Wrap Cable Sleeve Heat shrink Tube 1m Clear
Asin: B07FK4W1T9 | Model: a18060900ux0190 | PartNumber: a18060900ux0190
Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius Maximum..
Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & More..
Heat Shrink Tubing Is Good Useful, Of The Specification Of Good Electrical Insulation, Corrosion Resistance And High Temperature Resistance..
Operating Temperature: -55 To 125 Degree Celsius.
Features
- Diameter(Before Shrinking): 10mm / 0.39"; Flat Width: 16mm / 0.63"; Length(approx.): 1M / 3.3ft; Shrink Ratio: 2:1.
- Operating Temperature: -55 to 125 Degree Celsius
- Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.
- Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance.
- Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 inches
See On Amazon #8
uxcell Heat Shrink Tubing 1/8"(3mm) Dia 10m Length 2:1 Heat Shrink Wrap Cable Sleeve Heat shrink Tube Clear
Asin: B07FK4Q1JN | Model: a18060900ux0009 | PartNumber: a18060900ux0009
Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius Maximum..
Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & More..
Heat Shrink Tubing Is Good Useful, Of The Specification Of Good Electrical Insulation, Corrosion Resistance And High Temperature Resistance..
Operating Temperature: -55 To 125 Degree Celsius.
Features
- Diameter(Before Shrinking): 3mm / 0.12" ; Length ( approx.): 10m / 32.8ft; Shrink Ratio: 2:1.
- Operating Temperature: -55 to 125 Degree Celsius
- Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.
- Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance.
- Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.51 x 3.94 Inches
See On Amazon #9
MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 38mm Dia 60mm Flat 10 Feet Black Good Insulation for Battery Pack
Asin: B097ZQJ15H | Model: mea210427ee0053 | PartNumber: mea210427ee0053
Battery Wrap Tube Is With Good Insulation, Can Not Only Wrap And Protect The Battery Pack, Prevent Dust For The Battery Pack, But Also Beautify The Battery Pack. With Good Insulation, Pvc Heat Shrink Tubing Can Also Be Used For The Protection Of Electronic Components, And Led Pins..
Notice: Heat Gun Is Usually Used As Heating Tool. When Using The Heat Gun To Heat, Pay Attention To Move Back And Forth To Make The Heat Shrink Tube Heated As A Whole..
Steps Of Installation:1.Prepare Heat Shrink Tube, Cut It To The Length You Want ; 2.Put Battery In The Heat Shrink Tube ; 3.Shrink With Heat Gun.
The Pvc Heat Shrink Wrap Tube Is In Size Of: 38Mm Dia, 60Mm(2.36-Inch) Flat Width, 10 Feet Total Length, -40°C To +105°C(-40°F To +221°F) Temperature Range, 80°C(176°F) Shrinking Temperature.
Features
- PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
- The PVC heat shrink wrap tube is in size of: 38mm dia, 60mm(2.36-inch) flat width, 10 Feet total length, -40 C to +105 C(-40 F to +221 F) temperature range, 80 C(176 F) shrinking temperature
- Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the battery pack. With good insulation, PVC heat shrink tubing can also be used for the protection of electronic components, and LED pins.
- Steps of installation:1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun
- Notice: heat gun is usually used as heating tool. When using the heat gun to heat, pay attention to move back and forth to make the heat shrink tube heated as a whole.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon
Looking For Something Else?
Search