IdeaFormer-3D Double Sided Textured PEI Plate 235x235, Flexible PEI Magnetic Build Plate Spring Steel Print Bed for Creality K1/K1C/Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 V3 SE/KE/Ender 3 V2/Neo
Asin: B0CLC65B62 | Model: 235-S1 | PartNumber: 235-S1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Double Sided Printing Design】The Spring Steel Plate Can Be Printed On Both Sides. The Classics Textured Pei Will Never Go Out Of Style..
【Simple Installation】Peel Off The Backing Paper And Stick Magnetic Build Plate To The 3D Printer Bed, Finally Place The Pei Sheet On The Magnetic Plate..
【High Strength Spring Steel Materials】Ideaformer-3D Used High-Strength Spring Steel Plate, With Good Flatness And Elasticity. It's Not Easy To Deformation After Repeating Bending..
【Compatible 3D Printers】The Double Sided Textured Pei Sheet Size Is 235X235 With Screw Holes Which Perfect Fit For Creality K1/Creality K1c/Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5/ Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1..
Features
- Package Included 1 x PEI Spring Steel Plate; 1 x Magnetic Build Plate. (With Screw Holes)
- Compatible 3D Printers The double sided textured PEI sheet size is 235x235 with screw holes which perfect fit for Creality K1/Creality K1C/Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5/ Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1.
- Double Sided Printing Design The spring steel plate can be printed on both sides. The classics textured PEI will never go out of style.
- High Strength Spring Steel Materials IdeaFormer-3D used high-strength spring steel plate, with good flatness and elasticity. It's not easy to deformation after repeating bending.
- Simple Installation Peel off the backing paper and stick magnetic build plate to the 3D printer bed, finally place the PEI sheet on the magnetic plate.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon Similar To IdeaFormer3D Double Sided Textured PEI
#1
Official Creality Ender 3 V3 SE Build Plate, Original PEI 3D Printer Platform Kit 235x235mm Flexible Spring Steel Texture Surface Print Bed for Ender 3/3 S1/3S1 Pro/3 Neo/3 V2 Neo/3 V3 KE/3 V3/K1/K1C
Asin: B0CJTXJT24
【Great Adhesion More Stable】A Distinctive Frosted Feel Given By The Special Rough Frosted Surface Of The Plate. Higher Adhesion Of Models, Not Easy To Warp While Firmly Locks Creativity During The Printing Process..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】235*235Mm Spring Steel Build Plate 3D Printer Bed Compatible With Ender 3/ Ender 3 V2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/3V3 Cr 10 Se/K1/K1c And Other Same-Sized Beds. After Replacing The Printing Bed, Please Level The Bed Again For Better Printing Results..
【Easy To Remove Printed Models】Easy To Remove The Prints Without Tools, Just Take Out The Spring Steel Plate And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
Features
- Quality Assurance 100% Official Creality Ender 3 V3 SE build plate, original 235*235mm spring steel removable flexible textured heated bed platform. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Easy to Remove Printed Models Easy to remove the prints without tools, just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- Great Adhesion More Stable A distinctive frosted feel given by the special rough frosted surface of the plate. Higher adhesion of models, not easy to warp while firmly locks creativity during the printing process.
- Wide Application 235*235mm spring steel build plate 3d printer bed compatible with Ender 3/ Ender 3 v2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/3V3 CR 10 SE/K1/K1C and other same-sized beds. After replacing the printing bed, please level the bed again for better printing results.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.07 x 9.29 x 9.29 inches | Weight: 0.66 pounds
See On Amazon #2
Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Asin: B0CRDS6PRR
Strong Magnetic Force - The Pei Sheet 235X235mm Is Selection Of Strong Magnetic Paste, High Temperature Can Still Maintain A High Degree Of Magnetism, To Ensure The Stability Of Printing. The Ender 3 V3 Se Build Plateis Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print, It Can Print With Most Filaments, Such As Pla / Abs / Asa / Petg / Tpu / Nylon / Pa / Pc..
Wide Compatibility - The Pei Sheet 235X235mm And Peo Smooth Surface Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality K1c/K1/Ender 3 V3/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer..
Positioning Holes Design - Double Handles + Positioning Holes Design, Precise Positioning, Easy And Simple Installation. The Pei Spring Steel 235X235mm Makes The Prints Easy To Adhere To The Printing Surface, And It Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Excellent Flatness - The Ender 3 V3 Ke Pei Magnetic Heated Bed Provides The High Flatness Spring Steel, Ensuring The Model Can Be Firmly Attached To The Surface Of The Print Platform, Can Be Repeated Bending Without Deformation, Easy To Take The Model..
Features
- Premium Quality PEI Coating - The Creality K1 PEI Spring Steel 235x235mm is made of High temperature resistant PEI coating on the surface, high abrasion resistance and high strength frosted texture, the PEI build surface is not easy to scratch.
- Excellent Flatness - The Ender 3 V3 KE PEI Magnetic Heated Bed provides the high flatness spring steel, ensuring the model can be firmly attached to the surface of the print platform, can be repeated bending without deformation, easy to take the model.
- Strong Magnetic Force - The PEI Sheet 235x235mm is selection of strong magnetic paste, high temperature can still maintain a high degree of magnetism, to ensure the stability of printing. The ender 3 V3 SE Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC.
- Positioning Holes Design - Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- Wide Compatibility - The PEI sheet 235x235mm and PEO smooth surface is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality K1C/K1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
ELEGOO 235x235mm PEI Sheet Magnetic Build Plate, PEI Spring Steel Flexible Platform with Adhesive Bed for Neptune 3 Pro 3D Printer
Asin: B0C8NXD22S
Easy To Install - Only Need To Put The Magnetic Bottom Sheet Onto Your Heated Bed. The Steel Platform With Pei Surface Is On The Top. No More Mess.
High Compatibility - Not Only Compatible With Elegoo Neptune 3 Pro, But Also Fit Most Fdm 3D Printers With 235X235mm Bed.
Easy To Remove Prints - Elegoo Build Plate Is Flexible Enough To Remove Your Prints Simply By Bending The Plate Without Losing Durability.
Excellent Adhesion - The Powder-Coated Pei Plate Is Heat-Resistant. It Ensures Great Bed Adhesion When Printing And Make Prints Not Easy To Warp.
Features
- Original Spare Part - ELEGOO flexible magnetic build plate with sprayed one-sided PEI coating, size 235x235mm/9.25 x9.25
- Excellent Adhesion - The powder-coated PEI plate is heat-resistant. It ensures great bed adhesion when printing and make prints not easy to warp
- Easy to Install - only need to put the magnetic bottom sheet onto your heated bed. The steel platform with PEI surface is on the top. No more mess
- Easy to Remove Prints - ELEGOO build plate is flexible enough to remove your prints simply by bending the plate without losing durability
- High Compatibility - Not only compatible with ELEGOO Neptune 3 Pro, but also fit most FDM 3D printers with 235x235mm bed
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #4
IdeaFormer-3D Double Sided Textured PEO PET Build Plate for Bambu Lab X1C/X1/X1E/P1P/P1S/A1, Smooth Diamond PEO+Carbon Fiber PET Spring Steel Sheet Plate 257x257mm for Bambu Labs
Asin: B0CLRQ4DCF
【Excellent Adhesion For First Printing Layer】We Recommend These Filaments & Temperatures For Your Peo+Pet Printing Plate “Pla: 60~65℃; Petg: 70-80℃”. If Your Printer Is X1 Series, Please Turn Off "Enable Detection Of Build Plate Position", Otherwise It Will Casued Bad Adhesion..
【Package Included】1 X Peo Pet Spring Steel Sheet (Diamond Peo+Carbon Fiber Pet Double Sided Printing) Compatible For Bambu Lab X1c/X1/X1e/P1p/P1s/A1..
【Clean And Clean The Build Plate!!!】To Get Better Adhesion, Please Clean And Clean Well. Give It A Very Good Spray With Isopropyl And Wipe With Lint Free Towel Between Each Print. Any Tiny Bit Of Oil Or Residue Will Make Your Print Non-Stick..
【High Strength Spring Steel Materials】Ideaformer-3D Used High-Strength Spring Steel Plate, With Good Flatness And Elasticity. It's Not Easy To Deformation After Repeating Bending. Please Take The Prints When The Plate Is Cooling Down..
Features
- Double Sided Textured Holographic Build Plate IdeaFormer-3D offer 2 types of patterns for your printing, you don't have to worry about whether to buy PEO or PET plate, we combine smooth diamond PEO and carbon fiber PET with one spring steel plate.
- High Strength Spring Steel Materials IdeaFormer-3D used high-strength spring steel plate, with good flatness and elasticity. It's not easy to deformation after repeating bending. Please take the prints when the plate is cooling down.
- Excellent Adhesion For First Printing Layer We recommend these filaments & temperatures for your PEO+PET printing plate PLA: 60~65 ; PETG: 70-80 . If your printer is X1 series, please turn off Enable detection of build plate position, otherwise it will casued bad adhesion.
- Clean And Clean The Build Plate!!! To get better adhesion, please clean and clean well. Give it a very good spray with isopropyl and wipe with lint free towel between each print. Any tiny bit of oil or residue will make your print non-stick.
- Package Included 1 x PEO PET spring steel sheet (Diamond PEO+Carbon Fiber PET Double Sided Printing) Compatible for Bambu Lab X1C/X1/X1E/P1P/P1S/A1.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #5
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #6
Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235X235MM
Asin: B084YSZFXL | Model: MBE3 | PartNumber: MBE3 | Ean: 8414858708049
Easy To Install: Magnetic Bed Comes With Upper Matte Magnetic Build Plate And Lower Magnetic Adhesive Build Plate. Post The Lower Adhesive Plate On Printing Platform, Make The Upper Magnetic One Match Well With It, Then You Can Start Print..
Note: If The Two Parts Of The Magnetic Bed Fail To Adsorb, Please Rotate It 90 Degrees And Try Again. Do Not Use Acetone To Wipe Off Thin Layers Left From Prints. Please Feel Free To Contact Us If You Have Any Problem, We Will Try Our Best To Help You..
Universal: With 235Mm X 235Mm Size, This 3D Printer Kit Is Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds. Applicable Materials: Pla, Tpu, Nylon Etc, Not For Pla +, Not Recommended For Printing Abs Filaments..
Excellent Performance: This Magnetic Bed Has Strong Flexibility And Heat Resistance Up To 70 ℃ Without Degauss. Wear-Resistant, Scratch-Resistant, Stain-Resistant, Hand-Sweat Resistant, Can Be Used Repeatedly..
Features
- Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
- Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- Easy to Install: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
- Universal: With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon etc, not for PLA +, not recommended for printing ABS filaments.
- Note: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #7
Creality Ender 3 S1 Pro Build Plate, Original PEI Print Platform Kit Magnetic Flexible Spring Steel Texture Surface for Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/3 Neo/3V2 Neo K1/K1C 235x235mm
Asin: B0BBMKLG86 | Model: 3d-s1pro-pei | PartNumber: 3d-s1pro-pei
【Great Adhesion】Print Molds Onto Pei Build Plate Frosted Texture Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Easy Take Models】Easy To Remove The Prints Just Take Out The Build Plate Surface And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
【Wide Application】Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Spring Steel Sheet 3D Printer Bed Works Well With Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/Cp-01/Cr-20/Cr20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c And Other Same-Sized Beds..
Features
- Quality Assurance Made of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The design of the positioning hole makes the PEI Sheet installation more convenient.
- Wide Application Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm spring steel sheet 3d printer bed works well with Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C and other same-sized beds.
- Great Adhesion Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.
- Easy Take Models Easy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #9
Double-Sided Textured PEI Sheet 3D Printer Bed 235mm*235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1-Pro/Ender 5-Pro/Ender 3 V3 KE/SE
Asin: B0C2D5NDX8 | Model: 1 | PartNumber: 1 | Ean: 0795847035253 | UPC: 795847035253
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 9.25 x 9.25 x 0.08 Inches | Weight: 1.06 Pounds
See On Amazon #10
Official Creality Ender 3 V3 SE Build Plate 235x235 Original Textured PEI Sheet Magnetic Flexible Spring Steel Build Plate for Ender 3/Ender 3 V2/Ender 3 V3 KE/Ender 3 V3 SE/K1/K1C
Asin: B0CTQSMSJZ
High Quality Spring Steel - Crafted From High-Precision Spring Steel, Our Build Plate Ensures Exceptional Flatness, Guaranteeing Uniform Layer Adhesion During Printing. Its Elasticity Eases Prints Removal By Gently Bending. The Durable Plate Withstands Heating, Cooling Cycles, And Bending For Extended Use. Excellent Thermal Conductivity Ensures Even Heat Distribution, Preventing Object Contraction Or Deformation, Significantly Enhancing 3D Printing Quality, Convenience, And Durability..
In Order To Save Your Costs And Minimize Unnecessary Waste, This Product Only Includes An Ender 3 V3 Se Pei Sheet Without Magnetic Sheet. Therefore, It Is Suitable For Users Whose Original Magnetic Sticker Is Still Functional. If The Original Magnetic Sticker Is Damaged, Please Consider Purchasing The Build Plate Kit That Includes Magnetic Sheet..
Efficient Magnetic Board Design - The Printing Board Features A Magnetic Suction Design, Greatly Simplifying Base Replacement For Enhanced Convenience. With Dual Handles For Improved Grip, It Facilitates Easy And Secure Disassembly And Installation. Cleverly Positioned Holes Ensure Swift, Accurate Alignment, Preventing Model Displacement During Printing. Overall, The Design Prioritizes Swift Installation And Convenient Disassembly, Meeting Users' Demands For Efficient 3D Printing..
The Pei Coating Is Characterized By Its Wear Resistance And High-Temperature Durability. It Is Not Easily Scratched And Is Widely Applicable To Various Printing Materials. It Provides Reliable Adhesion To The Model Under Both High And Low Temperatures, Ensuring Stable 3D Printing Without Warping And Significantly Improving The Success Rate Of Prints..
Features
- Official Original Build Plate - Offical Creality Ender 3 V3 SE build plate, with dimensions of 235x235mm and a printing area of 220x220mm. Additionally, it is compatible with other FDM printers of the same size, such as Ender 3, Ender 3S, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Pro, Ender 3 Neo, Ender 3 V2, Ender 3 V2 Neo, Ender 3 V3, Ender 3 V3 KE, Ender 3 V3 SE, Ender 5, Ender 5S, Ender 5 S1, Ender 5 Pro, K1, K1C, KR, CR 10 SE, CR20, CP 01, etc.
- The PEI coating is characterized by its wear resistance and high-temperature durability. It is not easily scratched and is widely applicable to various printing materials. It provides reliable adhesion to the model under both high and low temperatures, ensuring stable 3D printing without warping and significantly improving the success rate of prints.
- High Quality Spring Steel - Crafted from high-precision spring steel, our build plate ensures exceptional flatness, guaranteeing uniform layer adhesion during printing. Its elasticity eases prints removal by gently bending. The durable plate withstands heating, cooling cycles, and bending for extended use. Excellent thermal conductivity ensures even heat distribution, preventing object contraction or deformation, significantly enhancing 3D printing quality, convenience, and durability.
- Efficient Magnetic Board Design - The printing board features a magnetic suction design, greatly simplifying base replacement for enhanced convenience. With dual handles for improved grip, it facilitates easy and secure disassembly and installation. Cleverly positioned holes ensure swift, accurate alignment, preventing model displacement during printing. Overall, the design prioritizes swift installation and convenient disassembly, meeting users' demands for efficient 3D printing.
- In order to save your costs and minimize unnecessary waste, this product only includes an Ender 3 V3 SE PEI sheet without magnetic sheet. Therefore, it is suitable for users whose original magnetic sticker is still functional. If the original magnetic sticker is damaged, please consider purchasing the build plate kit that includes magnetic sheet.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #11
YOOPAI Double-Sided PEI Sheet and Flexible Magnetic Build Plate Kit, 235x235mm 3D Printer Bed Platform for Creality K1/Ender 5 S1/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 Pro/Ender 3 Neo, Gold
Asin: B0C2HNZWTG | Model: DB-PEI-Black | PartNumber: DB-PEI-Black | Ean: 0850055848238 | UPC: 850055848238
Simple Set-Up: Our Pei Sheet Has Two Parts, A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive On The Back. Simply Attach The Magnetic Base Plate To The Printer's Hot Bed And Adsorb The Pei Bottom To Start Printing Immediately..
Wide Application: The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro,Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers..
Great Removal: Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Flexible And Easily Removed. When The Temperature Of The Heated Bed Reaches Room Temperature, Prints Come Off The Surface Easily. If The Print Is Still Stuck, Just Remove The Upper Magnetic Surface From The Lower One, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Can Handle The Tough Conditions Of 24/7 Printing With The Ultra-High Temperature Of Up To 120°C, Making It Perfect For Materials Like Pla, Petg, Abs, Tpu, Asa, Nylon, And Pc. Both Sides Of The Pei Sheet Can Be Printed, Pay Once And Get Twice The Usage Time..
Features
- Excellent Adhesion: Each Yoopai PEI sheet has two sides, both are textured. You can print directly on each side of the PEI sheet without using any glue or other tools to help the model to stick onto the sheet. Both sides have strong adhesion to various filaments, just choose either side for printing according to your needs.
- Reliable and Cost-effective: This 3D printer bed can handle the tough conditions of 24/7 printing with the ultra-high temperature of up to 120 C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and PC. Both sides of the PEI sheet can be printed, pay once and get twice the usage time.
- Simple Set-up: Our PEI Sheet has two parts, a flexible steel platform and a magnetic bottom sheet with adhesive on the back. Simply attach the magnetic base plate to the printer's hot bed and adsorb the PEI bottom to start printing immediately.
- Great Removal: Withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is flexible and easily removed. When the temperature of the heated bed reaches room temperature, prints come off the surface easily. If the print is still stuck, just remove the upper magnetic surface from the lower one, bend the flexible surface and watch the model fall right into your hands.
- Wide Application: The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. It is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 pro,Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.
- See more on Amazon...
First Available: 02/10/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 9.25 x 0.16 x 9.25 inches
Warranty: 1 year garantie
See On Amazon #12
Creality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro and All 235 * 235mm Size 3D Printer
Asin: B0BRQ7LRNC | Model: CR-PEI0105 | PartNumber: CR-PEI0105 | Ean: 0783970029119 | UPC: 783970029119
【Easy Model Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Excellent Adhesion】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well..
Features
- Creality Official Creality Official Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well.
- Easy Model Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- Wide Application The size of ender 3 PEI is 235*235mm 9.25*9.25inch). please re-level it to improve the printing effect. it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Weight: 1.39 Pounds
See On Amazon #13
Creality Ender 3 Max Neo Bed Upgrade, PEI Sheet 310 x 320mm Removable Magnetic Flexible Texture Surface Heated Bed Plate Build Surface for CR-10S PRO/CR-10 V2/ CR-10 V3/ CR-X/CR-X Pro/Ender-3 Max
Asin: B0BL337VZL | Model: 3D-PEI-320x310 | PartNumber: 3D-PEI-320x310
【Great Adhesion & Easy Take Mold】Print Molds Onto Pei Build Plate Frosted Texture Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety. With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Mold Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Our Pei Steel Sheet Is Easy To Install And The Installation Time Is Less Than 2 Minutes. Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker..
【Wide Application】Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 310*320Mm Spring Steel Sheet 3D Printer Bed Works Well With Cr-10S Pro/ Cr-10 V2/ Cr-10 V3/ Cr-X/ Cr-X Pro/ Cr-10S Pro V2/ Ender-3 Max/ Ender-3 Max Neo And Other Same-Sized Beds..
Features
- Quality assurance 100% Official Creality 3D printer PEI Sheet 310*320mm removable magnetic flexible Texture heated bed platform. Gold PEI surface is of strong high-temperature stability, flame retardant, heat resistance, high strength, wear resistance, and good printing stability.
- Wide Application Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 310*320mm spring steel sheet 3d printer bed works well with CR-10S PRO/ CR-10 V2/ CR-10 V3/ CR-X/ CR-X Pro/ CR-10S PRO V2/ Ender-3 Max/ Ender-3 Max Neo and other same-sized beds.
- Great Adhesion & Easy Take Mold Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- Simple Installation Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #14
3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro
Asin: B09WZSGXFL | Model: CR-Power PEI-235mm | PartNumber: CR-Power PEI-235mm | Ean: 0747976885032 | UPC: 747976885032
Two-In-One Type Of Pei Powder Coated Hardended Steel Spring Sheet Nerver Disforming, Magnetic Base With Strong Magnetism.
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety.
Easy To Install, Easy To Remove The Models By Bending Or Popping It Off.
Size: 235Mm X 235Mm..
Features
- Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.
- Size: 235mm x 235mm.
- Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism
- Easy to install, easy to remove the models by bending or popping it off
- No more tape, no more glue, no more shovel, and release your printing anxiety
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 1.12 pounds
See On Amazon #15
Creality Official Ender 3 Bed Upgraded, PEI Sheet Removable Magnetic Flexible Heated Bed Build Plate Surface Bed Cover for Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE 235X235mm
Asin: B09WK7BDBX
❤【Great Adhesion & Easy Take Mold】Print Molds Onto Pei Sheet Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety. With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Mold Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
👑【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
👍【Simple Installation】Our Pei Steel Sheet Is Easy To Install And The Installation Time Is Less Than 2 Minutes. Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
⭕【Wide Application】The Pei Sheet Can Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Pei Sheet 3D Printer Bed Perfect Printing Size Works Well With Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c, Please Remove The Two Positioning Screws On The Hotbed First.) Pei Sheets Can Withstand The Numerous Heat Cycles That A 3D Printer Bed Goes Through From Print To Print..
Features
- Quality Assurance 100% Official Creality 3D Printer PEI Sheet Removable Magnetic Flexible Heated Bed Platform has three overlaps, heat resistant and durable. The flexible spring steel platform is in the middle, covered with an imported PEI surface on it, which can be resistant to 200 C and has high strength with no deformation. And a magnetic base at the bottom can withstand a long time of work with the 3d printer heated bed at a high temperature of 70 C.
- Wide Application The PEI sheet can compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3/Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C, please remove the two positioning screws on the hotbed first.) PEI sheets can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Great Adhesion & Easy Take Mold Print molds onto PEI sheet surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- Simple Installation Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #16
PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Printer
Asin: B0BRCRX6T9 | Model: PEI-1230 | PartNumber: PEI-1230 | Ean: 0783970029096 | UPC: 783970029096
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. , It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【More Affordable And Practical】 We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. This Means A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of 120°C，Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
【Easy Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet.
- Easy Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- More Affordable and Practical We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Wide Application The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 12/30/2022
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 8.27 x 8.27 x 4.33 Inches
Warranty: 2 years
See On Amazon #17
Creality Ender 3 Build Plate Kit Dual-Sided Printing Platform Board Glossy PET + Matte PEI Plate Build Surface for Ender 3 V3 SE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1 235x235mm
Asin: B0CQQZZSSQ
【Compatible 3D Printers】The Double-Sided Glossy Pet + Matte Pei Print Bed Suitable For 3D Printers With 235×235Mm Platform Size, Such As Suitable For Creality Ender 3 V3 Se/Ender 3 V3 Ke/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/Cr 10 Se, Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Flatness & Easy Demolding】High-Flatness Spring Steel Sheet With Excellent Elasticity, Remains Undistorted After Repeated Bending, Wear-Resistant And Durable, Facilitating Demolding..
【Quick Installation & Precise Positioning】Dual-Sided Printing Platform Board Kit – Glossy Pet + Matte Pei, With The Unique Dual-Handle + Dual-Locating Hole Design For Accurate Installation..
【High Adhesion & Stable Molding】Ender 3 V3 Se Pei Build Plate Thin Spring Steel Sheet With Surface Adhesion To High-Adhesion Materials, To Reduce Inertia During Platform Movement For Smoother 3D Printer Operation..
【Compatible Filaments】Ender 3 Build Plate Pet Sticker Build Plate Surface Can Withstand Temperatures Up To Approximately 80°C; Recommended For Printing Pla, Petg, Tpu. Matte Pei Surface Suitable For Printing Nearly All Mainstream Filaments: Pla, Petg, Abs, Tpu, Asa, Pet, Pa, Pc, Etc. Dual-Sided Platform Combining The Strengths Of Both, Allowing For Seamless Switching..
Features
- Upgraded Double Sided Printing Platform Board Double-sided PET+PEI printing platform meets diverse printing needs. one side is PET carbon fiber texture design, unique and innovative pattern, excellent texture effect on model bottom surface. The other side is matte PEI presenting the frosted sticker surface a distinctive frosted touch, high-adhesion, to prevent model warping.
- Compatible Filaments Ender 3 build plate PET sticker build plate surface can withstand temperatures up to approximately 80 C; recommended for printing PLA, PETG, TPU. Matte PEI surface suitable for printing nearly all mainstream filaments: PLA, PETG, ABS, TPU, ASA, PET, PA, PC, etc. Dual-sided platform combining the strengths of both, allowing for seamless switching.
- Compatible 3D Printers The double-sided glossy PET + matte PEI print bed suitable for 3D printers with 235 235mm platform size, such as suitable for Creality Ender 3 V3 SE/Ender 3 V3 KE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/CR 10 SE, Please confirm your 3D printer platform size before ordering.
- High Adhesion & Stable Molding Ender 3 V3 SE PEI build plate thin spring steel sheet with surface adhesion to high-adhesion materials, to reduce inertia during platform movement for smoother 3D printer operation.
- High Flatness & Easy Demolding High-flatness spring steel sheet with excellent elasticity, remains undistorted after repeated bending, wear-resistant and durable, facilitating demolding.
- Quick installation & Precise positioning Dual-Sided Printing Platform Board Kit Glossy PET + Matte PEI, with the Unique dual-handle + dual-locating hole design for accurate installation.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.31 x 10.43 x 9.84 inches | Weight: 1.20 Pounds
See On Amazon #18
IdeaFormer-3D Smooth PEO+Textured PEI Spring Steel Build Plate 235x235mm, Double Sided PEO+PEI Heated Bed for Ender 3/Ender 3 V2/Ender 3 Pro/Neo/Ender 3 S1/Ender 3 S1 Pro/Neptune 3
Asin: B0BYD6C2RN
【High Durability】The Peo Printing Sheet Surface Is Resistant To High Temperatures Of 120°C And The Pei Coating Heated Bed Is 260°C..
【Easy Installation】Put The Peo+Pei Steel Sheet On The Hot Bed Of Your 3D Printer, And It Is Ready To Use. (This Spring Steel Plate Does Not Include Magnetic Build Plate.).
【Compatible 3D Printer 】The Peo+Pei Sheet Plate Fits The Size Of 235 X 235Mm, Such As For Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Cr20, Cr20 Pro, Ender 5, Ender 5 Pro, Mega Pro, Mega Zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Neptune 3/3 Pro /4/4 Pro, Odin-5 F3 Etc..
【Compatible Filaments】Peo Printing Bed Surface Only Prints Pla Filaments; Pei Surface Sheet Most Filaments Such As Pla / Abs / Petg / Tpu / Nylon..
Features
- Smooth PEO+Textured PEI-No Magnetic Build Plate Double sided PEO+PEI heated bed platform produced using advanced technology. One is a smooth PEO printing bed surface, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted bed surface, the textured surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping. There is no magnetic base.
- Compatible Filaments PEO printing bed surface only prints PLA filaments; PEI surface sheet most filaments such as PLA / ABS / PETG / TPU / nylon.
- High Durability The PEO printing sheet surface is resistant to high temperatures of 120 C and the PEI coating heated bed is 260 C.
- Compatible 3D Printer The PEO+PEI sheet plate fits the size of 235 x 235mm, such as for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, CR20, CR20 Pro, Ender 5, Ender 5 Pro, Mega Pro, mega zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Neptune 3/3 Pro /4/4 Pro, Odin-5 F3 etc.
- Easy Installation Put the PEO+PEI steel sheet on the hot bed of your 3D printer, and it is ready to use. (This spring steel plate does not include magnetic build plate.)
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #19
Creality Original Ender 3 Bed,Ultra-Flexible Removable Magnetic Build Plate, 3D Printer Build Surface for Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro/CR 20/CR 20 Pro, 235X235MM
Asin: B09GM8NGXG | Model: platform001 | PartNumber: platform001
Easy To Install: The Build Surface Consists Of An Upper Magnetic Build Surface And A Lower Magnetic Adhesive Base. Place The Lower 3M Adhesive Surface On Top Of The 3D Printer Build Plate Then You Can Start To Print Your Models..
Note: Before Installation, Please Make Sure The Bottom Of The Soft Magnetic Adhesive Is Firmly Attached To The Upper Layer, If It Cannot Be Attached, Please Rotate 90 Degrees And Try Again Until It Is Fully Attached.Please Don't Use Acetone To Wipe The Thin Layer Left By The Models..
Customizable: This Magnetic Bed Replacement Can Be Easily Cut To Any Size. Suitable For All Fdm Printer Models, As Well As All Heated And Unheated 3D Printer Beds. Suitable Materials: Pla.
Excellent Performance: The Magnetic Bed Is Highly Flexible And Heat Resistant, Up To 70°C Without Demagnetization. The Heating Speed Is Fast And Uniform, Ensuring That The Bottom Of The Finished Model Is Delicate And Not Warped. It Is Durable, Easy To Clean With Alcohol And Can Be Used Repeatedly..
Features
- Easy to Remove the Print: The preferred choice for 3D printer heated beds, just print on the magnetic construction board, remove the upper magnetic surface, carefully bend it, and watch the model fall into your hands. VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken. VS. carbon-silicon glass, it is more affordable and easier to remove the model.
- Excellent Performance: The magnetic bed is highly flexible and heat resistant, up to 70 C without demagnetization. The heating speed is fast and uniform, ensuring that the bottom of the finished model is delicate and not warped. It is durable, easy to clean with alcohol and can be used repeatedly.
- Easy to Install: The build surface consists of an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the 3D Printer build plate then you can start to print your models.
- Customizable: This magnetic bed replacement can be easily cut to any size. Suitable for all FDM printer models, as well as all heated and unheated 3D printer beds. Suitable materials: PLA
- Note: Before installation, please make sure the bottom of the soft magnetic adhesive is firmly attached to the upper layer, if it cannot be attached, please rotate 90 degrees and try again until it is fully attached.Please don't use acetone to wipe the thin layer left by the models.
- See more on Amazon...
Brand: Mefine | Manufacturer: Creality
Weight: 0.79 Pounds
See On Amazon #20
Geeetech PEI Sheet 310x310mm, Double Textured Surface Magnetic Build Plate, Flexible Removable Spring Steel with Adhesive for Creality CR-10 CR-10S/10 S3, Sidewinder X1/X2 S8 Pro S8 Plus KP5L SP-5
Asin: B09MKKW9TX
【Simple Installation】This 3D Printer Bed Consists Of Two Parts,One Sheet Of Magnetic Base And One Sheet Of Pei-Coated Frosted Spring Steel Platform. Just Need To Place The Bottom 3M Adhesive Surface To Your Heated Bed, Pei Bed Can Be Magnetically Bonded..
【Wide Application】The Size Of Pei Sheet Is 310*310Mm *4.06Mm(12.2*12.2Inch), It's Suitable For Geeetech A30, A30m, A30t, A30 Pro And Creality Cr-10, Cr-10S, Sidewinder X1/X2 S8 Pro S8 Plus Kp5l Sp-5 X40v2 Tevo Tornado, Anet A8, E12, Mp Maker Pro And Other Same Sized 3D Printers, Compatible With Pla, Petg, Peek, Abs 3D Printer Filaments..
【Easy To Adhere And Remove】This Cr-10 Pei Build Plate Surface Has Excellent Adhesion, Easy To Stick And Remove, No Glue And Shovel Required, And When The Build Surface Cools To Room Temperature, Prints Can Be Removed By Bending The Steel Plate Slightly.
【High-Quality Spring Steel】 Hardened Steel Spring Plate Has No Curling Edges, It Has Extremely High Magnetic Properties, Can Be Well Adhered To The Magnetic Base, Cr 10 Pei Sheet Can Withstand Numerous Thermal Cycles Of The Print Bed Without Deformation.
Features
- Textured Surface The golden yellow matte surface with PEI powder coating has strong heat resistance, flame resistance, abrasion resistance and high print stability. The max temp for printing on the bed can reach 130 C, and the best adhesion is around 60 C
- High-quality Spring Steel Hardened steel spring plate has no curling edges, it has extremely high magnetic properties, can be well adhered to the magnetic base, CR 10 PEI sheet can withstand numerous thermal cycles of the print bed without deformation
- Simple Installation This 3d printer bed consists of two parts,one sheet of magnetic base and one sheet of PEI-coated frosted spring steel platform. Just need to place the bottom 3M adhesive surface to your heated bed, PEI bed can be magnetically bonded.
- Easy to Adhere and Remove This cr-10 pei build plate surface has excellent adhesion, easy to stick and remove, no glue and shovel required, and when the build surface cools to room temperature, prints can be removed by bending the steel plate slightly
- Wide Application The size of PEI sheet is 310*310mm *4.06mm(12.2*12.2inch), It's suitable for Geeetech A30, A30M, A30T, A30 PRO and Creality CR-10, CR-10S, Sidewinder X1/X2 S8 Pro S8 Plus KP5L SP-5 X40V2 Tevo Tornado, Anet A8, E12, MP Maker Pro and other same sized 3D Printers, Compatible with PLA, PETG, PEEK, ABS 3d printer filaments.
- See more on Amazon...
Brand: GIANTARM | Manufacturer: GIANTARM
See On Amazon
Looking For Something Else?
Search