LOUDERLUN 2 Piece Dimple Die Set : 2-1/4", 2-3/4"
Asin: B0CLY5C16V | Model: ZL26-04 | PartNumber: ZL26-04 | Ean: 0768399535304 | UPC: 768399535304
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.More Details: Made For Use With A Hydraulic Press Or Arbor Press. Holes Must Be Drilled Before You Dimple The Materials.(These Do Not Act As Punches) We Recommend No Thicker Than 1/8" Material. We Recommend Lubricants When Using The Dies.This Will Reduce Die Wear And Gulling..
Tools Required (Not Included): A Set Of Sharp, High-Quality Metal Saws In Sizes Corresponding To Those In The Die Set. A 20 Ton Hydraulic Shop Press Or Equivalent..
Metal Flaring Capacity: Mild Steel: 1/8, Aluminum: 1/8, Stainless Steel: 3/32.
Common Uses Are : Providing Rigidity To Sheetmetal Projects. -Lightening Up Builds -Dimple Die Skid Plates-Front Bumper Plates-Floorboards-Foot Pedals-Footrests And Many More Uses. -Use The Raised Side Of The Dimpled Material For Added Traction On Running Boards And Floorboards. -Or Just Use Them To Add That Extra Rad Look To Any Project.
Features
- 2 Piece Dimple Die Set Metal Fabrication Set Kits consists of the following dies: 2-1/4"(2.25), 2-3/4"(2.75)
- Common uses are : Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
- More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8 material. We recommend lubricants when using the dies.This will reduce die wear and gulling.
- Metal Flaring Capacity: Mild Steel: 1/8, Aluminum: 1/8, Stainless Steel: 3/32
- Tools Required (not included): A set of sharp, high-quality metal saws in sizes corresponding to those in the Die Set. A 20 Ton Hydraulic Shop Press or equivalent.
- See more on Amazon...
Brand: LOUDERLUN | Manufacturer: LOUDERLUN
See On Amazon Similar To LOUDERLUN 2 Piece Dimple Die
#1
3 Piece Dimple Die Set 1/2" 3/4'" 1"
Asin: B079MNQVQN
International Products Have Separate Terms, Are Sold From Abroad And May Differ From Local Products, Including Fit, Age Ratings, And Language Of Product, Labeling Or Instructions.
Local United States Shipper.
Features
- Great selection of popular sizes
- Local United States Shipper
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDistribution
Dimensions: 2.00 x 2.00 x 2.00 inches | Weight: 3.00 pounds
Warranty: Limited
See On Amazon #2
Dimple Die Set 3 Piece Metal Fabrication Tools 1/2" / 3/4" / 1"
Asin: B0972FPX93 | Model: COMPLETE-1/2"-3/4"-1"-Set | PartNumber: COMPLETE-1/2"-3/4"-1"-Set | Ean: 0738712269513 | UPC: 738712269513
Made For Use With A Hydraulic Press Or Arbor Press. There Are No Holes In The Middle Of These Dies..
100% Brand New With Good Performance. 1 Year Unlimited-Mileage Quality Guarantee..
Fits For Polaris Rzr Xp1000, Yamaha Yxz, Jeep, Utv, Sandcar, Truck, Hot Rods, Can Am Maverick X3, Race Cars..
Dies Are Cnc Machined From Premium Sae 8620 Steel With A Rockwell Hardness Of 80..
Features
- Kits consists: 1/2"(.500) , 3/4" (.750) , 1" (1.00) . the same as the picture.
- Dies are CNC machined from premium SAE 8620 steel with a Rockwell hardness of 80.
- Made for use with a hydraulic press or arbor press. There are no holes in the middle of these dies.
- Fits for Polaris RZR XP1000, Yamaha YXZ, Jeep, UTV, Sandcar, Truck, Hot rods, Can Am Maverick X3, Race cars.
- 100% Brand new with good performance. 1 Year Unlimited-mileage Quality Guarantee.
- See more on Amazon...
Brand: 1409KMT | Manufacturer: LANHO AUTO PARTS
Weight: 3.31 pounds
See On Amazon #3
LOUDERLUN Hole Punch & Flare Tool Dimple Plate Dies in Black (Sizes (inches): 1-1/2)
Asin: B09W9B91X4 | Model: ZL10401 | PartNumber: ZL10401
Construction: Steel.
Use With Draw-Bolt Or In Bench Press.
Punch And Flare A Hole In Up To 1.5Mm/16 Gauge Steel.
Flare Height (Inches): 1/4 (Approximate).
Features
- Finish Hole (inches): +1/8 (approximate)
- Flare Height (inches): 1/4 (approximate)
- Construction: steel
- Punch and flare a hole in up to 1.5MM/16 gauge steel
- Use with draw-bolt or in Bench Press
- See more on Amazon...
Brand: LOUDERLUN | Manufacturer: LOUDERLUN
See On Amazon #4
LOUDERLUN 3 Piece Dimple Die Set: 1-1/4" 2-1/2" 3"
Asin: B0CLY64QF8 | Model: ZL26-03 | PartNumber: ZL26-03
Common Uses Are : Providing Rigidity To Sheetmetal Projects. -Lightening Up Builds -Dimple Die Skid Plates-Front Bumper Plates-Floorboards-Foot Pedals-Footrests And Many More Uses. -Use The Raised Side Of The Dimpled Material For Added Traction On Running Boards And Floorboards. -Or Just Use Them To Add That Extra Rad Look To Any Project.
More Details: Made For Use With A Hydraulic Press Or Arbor Press. Holes Must Be Drilled Before You Dimple The Materials.(These Do Not Act As Punches) We Recommend No Thicker Than 1/8" Material. We Recommend Lubricants When Using The Dies.This Will Reduce Die Wear And Gulling..
Dies Are Cnc Machined From Premium Cr Steel With A Rockwell Hardness Of 80. These Dies Are Great For Virtually Anything You Can Dream Up..
Features
- 3 Piece Dimple Die Set Metal Fabrication Set Kits consists of the following dies: 1-1/4"(1.25), 2-1/2"(2.5), 3"(3.00)
- Dies are CNC machined from premium Cr steel with a Rockwell hardness of 80. These dies are great for virtually anything you can dream up.
- Common uses are : Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
- More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8 material. We recommend lubricants when using the dies.This will reduce die wear and gulling.
- See more on Amazon...
Brand: LOUDERLUN | Manufacturer: LOUDERLUN
See On Amazon #5
LOUDERLUN 9 Piece Dimple Die Set : 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3"
Asin: B0CNXJVG9D | Model: ZL26-05 | PartNumber: ZL26-05
Metal Flaring Capacity: Mild Steel: 1/8, Aluminum: 1/8, Stainless Steel: 3/32.
Tools Required (Not Included): A Set Of Sharp, High-Quality Metal Saws In Sizes Corresponding To Those In The Die Set. A 20 Ton Hydraulic Shop Press Or Equivalent..
More Details: Made For Use With A Hydraulic Press Or Arbor Press. Holes Must Be Drilled Before You Dimple The Materials.(These Do Not Act As Punches) We Recommend No Thicker Than 1/8" Material. We Recommend Lubricants When Using The Dies.This Will Reduce Die Wear And Gulling..
Features
- Common uses are : Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
- More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8 material. We recommend lubricants when using the dies.This will reduce die wear and gulling.
- Metal Flaring Capacity: Mild Steel: 1/8, Aluminum: 1/8, Stainless Steel: 3/32
- Tools Required (not included): A set of sharp, high-quality metal saws in sizes corresponding to those in the Die Set. A 20 Ton Hydraulic Shop Press or equivalent.
- See more on Amazon...
Brand: LOUDERLUN | Manufacturer: LOUDERLUN
See On Amazon #6
Dimple Die Set 3 Pieces : 1-1/2" 1-3/4"- 2"
Asin: B07CVRZDZJ
Designed For Use In Production Environments For Long Term Use..
Simply Drill Or Punch The Hole And Dimple Away..
We Recommend No Thicker Than 1/8" Steel, Aluminum,Stainless. Some Customers Have Dimplee 3/16".
Professinal Grade Dimple Die Tools And Products Since 2006.
Great Selection Of Our Mid Size Dimple Dies. Includes 1-1/2"-1-3/4"-2" Dies..
Features
- Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
- Great selection of our mid size dimple dies. Includes 1-1/2-1-3/4-2 dies.
- Designed for use in production environments for long term use.
- Professinal grade dimple die tools and products since 2006
- Simply drill or punch the hole and dimple away.
- We recommend no thicker than 1/8 steel, aluminum,stainless. Some customers have dimplee 3/16
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDistribution
Dimensions: 1.50 x 7.00 x 2.00 inches | Weight: 5.00 pounds
See On Amazon #7
10 Piece Dimple Die Set 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/2" 3" Includes Dzus Dimple Die
Asin: B0785PY1H2
Holes Must Be Drilled Before You Dimple The Materials.(These Do Not Act As Punches).
Great Set To Produce Quality Dimples-Trusted By Fabrication Specialist Since 2006..
Quality Products You Can Count On. Not Standard Steel Like Other Options On The Market!.
45 Degree Flare Angle. Great For Lighting Panels And Adding Structural Integrity..
Purchase A Set And Begin Your Dimple Die Addiction..
10 Piece Set Provides The Best Variety Of Dimple Options For Many Applications..
Great Selection Of Popular Sizes. Must Have In Your Toolbox!.
Features
- Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
- Great selection of popular sizes. Must have in your toolbox!
- Holes must be drilled before you dimple the materials.(These do not act as punches)
- 10 Piece set provides the best variety of dimple options for many applications.
- 45 degree flare angle. Great for lighting panels and adding structural integrity.
- Purchase a set and begin your dimple die addiction.
- Great set to produce quality dimples-trusted by fabrication specialist since 2006.
- Quality products you can count on. Not standard steel like other options on the market!
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDistribution
Dimensions: 3.50 x 9.00 x 6.00 Inches
See On Amazon #8
XTPTFABS Dimple Die Set and Steel Backing Discs Compatible with Harbor Freight Hydraulic Punch Driver kit
Asin: B0BY25X1MX | Model: Dimple Die Set And Steel Backing Discs | PartNumber: Dimple Die Set And Steel Backing Discs
√【Applicable Scenario】:Scope Of Applicable Materials For Dimple Die Set+Steel Backing Discs：Max Forming Material Thickness Is 18Ga Mild Steel And 12Ga Soft Aluminum..
√【Note】:Deburring The Hole Before Forming Is Recommended. Always Wear Safety Glasses And Proper Ppe During Use. Harbor Freight Hydraulic Punch Driver Kit (Manual Hydraulic Press And Cutting Dies) Is Not Included!.
√【Method Of Use】: Punch A Hole In The Sheet Metal Using The Knockout Tooling, Then Replace With The Dies And Form The Flare. Also Included Are Two Sizes Of Steel Backing Discs That Support The Die During Forming.The Dimple Die Set Is Made Of Hard Plastic..
√【Set Includes】:1.115", 1.362", 1.687", 1.937", And 2.375" Dimple Dies (2 Each)；2.1" X 0.188" And 3.39" X 0.188" Steel Backing Discs.
Features
- Compatible With :This dimple die set works with the Harbor Freight hydraulic press knockout kit. These dies could also be used in a press or vise as long as the parts hole diameter was correctly sized.
- Set includes :1.115, 1.362, 1.687, 1.937, and 2.375 Dimple Dies (2 each) 2.1 x 0.188 and 3.39 x 0.188 Steel Backing Discs
- Applicable scenario :Scope of Applicable Materials for Dimple Die Set+Steel Backing Discs Max forming material thickness is 18ga mild steel and 12ga soft aluminum.
- Method of use : Punch a hole in the sheet metal using the knockout tooling, then replace with the dies and form the flare. Also included are two sizes of steel backing discs that support the die during forming.The Dimple Die Set is made of hard plastic.
- Note :Deburring the hole before forming is recommended. Always wear safety glasses and proper PPE during use. Harbor freight hydraulic punch driver kit (manual hydraulic press and cutting dies) is NOT included!
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #9
UTVDISTRIBUTION Dimple Die Set Sizes 1/2"-3/4"-1"-1 1/4" 1 1/12" 1 3/4" 2"
Asin: B09R9RX9JF
Dies Are Cnc Machined From Premium Sae 8620 Steel With A Rockwell Hardness Of 80. Case Hardened..
Premium Quality Tools For You Shop..
For Use With Bolts Or Hydraulic Press.
Holes Must Be Drilled Before You Dimple The Materials..
Great Kit For Dimpling Panels On Vehicles Or In Hydraulic Press..
Kits Consists Of The Following Dies: 1/2" (.500) 3/4"(.750) 1"(1.00) 1 1/4" (1.250) 1 1/2" (1.500) 1 3/4"(1.750) 2" (2.00).
Features
- 7 Piece set with most popular sizes
- Kits consists of the following dies: 1/2 (.500) 3/4(.750) 1(1.00) 1 1/4 (1.250) 1 1/2 (1.500) 1 3/4(1.750) 2 (2.00)
- Dies are CNC machined from premium SAE 8620 steel with a Rockwell hardness of 80. Case Hardened.
- Great kit for dimpling panels on vehicles or in hydraulic press.
- For use with bolts or hydraulic press
- Holes must be drilled before you dimple the materials.
- Premium quality tools for you shop.
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDISTRIBUTION
Dimensions: 2.00 x 9.00 x 6.00 inches | Weight: 14.00 pounds
Warranty: No Warranty
See On Amazon #10
Dimple Dies for Metal Fabrication, Multiple Sizes to Choose from (2")
Asin: B077Z3FZ7L
Mix And Match To Get The Sizes You Want !.
Local United States Shipper.
Great Selection Of Popular Sizes To Choose From.
Features
- Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
- Great selection of popular sizes to choose from
- Mix and match to get the sizes you want !
- Local United States Shipper
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDistribution
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #11
LOUDERLUN 3 Piece Dimple Die Set: 1-1/2" 1-3/4" 2"
Asin: B0CLY6MRWT | Model: ZL26-02 | PartNumber: ZL26-02
Common Uses Are : -Providing Rigidity To Sheetmetal Projects. -Lightening Up Builds -Dimple Die Skid Plates-Front Bumper Plates-Floorboards-Foot Pedals-Footrests And Many More Uses. -Use The Raised Side Of The Dimpled Material For Added Traction On Running Boards And Floorboards. -Or Just Use Them To Add That Extra Rad Look To Any Project.
More Details: Made For Use With A Hydraulic Press Or Arbor Press. Holes Must Be Drilled Before You Dimple The Materials.(These Do Not Act As Punches) We Recommend No Thicker Than 1/8" Material. We Recommend Lubricants When Using The Dies.This Will Reduce Die Wear And Gulling..
Dies Are Cnc Machined From Premium Cr Steel With A Rockwell Hardness Of 80. These Dies Are Great For Virtually Anything You Can Dream Up..
Features
- 3 Piece Dimple Die Set Metal Fabrication Set Kits consists of the following dies: 1-1/2"(1.50), 1-3/4"(1.75), 2"(2.00).
- Dies are CNC machined from premium Cr steel with a Rockwell hardness of 80. These dies are great for virtually anything you can dream up.
- Common uses are : -Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
- More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8 material. We recommend lubricants when using the dies.This will reduce die wear and gulling.
- See more on Amazon...
Brand: LOUDERLUN | Manufacturer: LOUDERLUN
See On Amazon #12
3 Piece Dimple Die Set 1/2" / 3/4" / 1" Metal Fabrication Tools
Asin: B0B2HXGG7V | Ean: 0738712257350 | UPC: 738712257350
We Recommend No Thicker Than 3/16" Material. Recommend Lubricants When Using The Dies & Reduce Die Wear And Gulling..
1 Year Unlimited-Mileage Quality Guarantee.
Dies Size: 1/2" / 3/4" / 1"; Type: Dimple Die.
Made For Use With A Hydraulic Press Or Arbor Press. No Holes In The Middle Of These Dies. Providing Rigidity To Sheetmetal Projects..
Features
- Kits consists: 1/2"(.500), 3/4" (.750), 1" (1.00)
- Made for use with a hydraulic press or arbor press. No holes in the middle of these dies. Providing rigidity to sheetmetal projects.
- We recommend no thicker than 3/16 material. Recommend lubricants when using the dies & Reduce die wear and gulling.
- Dies Size: 1/2 / 3/4 / 1; Type: Dimple Die
- 1 Year Unlimited-mileage Quality Guarantee
- See more on Amazon...
Brand: Generic | Manufacturer: KINGGOODS
See On Amazon #13
UTVDISTRIBUTION Dimple Die Set 3 Piece 1/2" 3/4" 1" Bolt Together or Hydraulic Press USA Made
Asin: B09R933XDQ
Dies Can Be Bolted Together To Dimple Or Placed In A Hydraulic Press..
We Recommend No Thicker Than 1/8" Thick Steel / Aluminum Or Stainless Sheetmetal..
These Dies Are Not Standard Steel Plated. Those Will Not Hold Up..
The Original Designer For Metal Fabrication Specialists. Quality You Can Count On..
Simplly Drill Or Punch The Material To The Die Size And Dimple Away..
Kit Contains 1/2"-3/4" 1" Dimple Dies.
Heavy Duty Case Sae 8620 Hardened Tool Steel Dimple Die Tools Built To Last..
Features
- Made In The USA
- Heavy Duty Case SAE 8620 Hardened Tool Steel Dimple Die Tools built to last.
- Dies can be bolted together to dimple or placed in a hydraulic press.
- Kit contains 1/2-3/4 1 Dimple dies
- The original designer for metal fabrication specialists. Quality you can count on.
- Simplly drill or punch the material to the die size and dimple away.
- We recommend no thicker than 1/8 thick steel / aluminum or stainless sheetmetal.
- These dies are not standard steel plated. Those will not hold up.
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDISTRIBUTION
Dimensions: 2.00 x 5.00 x 2.00 Inches
Warranty: No Warranty
See On Amazon #14
Globauto 2" Hole Punch & Flare Tool Dimple Plate Dies in Black
Asin: B09DWLXKWK | Model: CK101-2 | PartNumber: CK101-2 | Ean: 6974482750156
Construction: Steel.
Use With Draw-Bolt Or In Bench Press.
Punch And Flare A Hole In Up To 1.5Mm/16 Gauge Steel.
Flare Height (Inches): 1/4 (Approximate).
Features
- Finish Hole (inches): +1/8 (approximate)
- Flare Height (inches): 1/4 (approximate)
- Construction: steel
- Punch and flare a hole in up to 1.5MM/16 gauge steel
- Use with draw-bolt or in Bench Press
- See more on Amazon...
Brand: Globauto | Manufacturer: Globauto
See On Amazon #15
Sheet Metal Flared Hole Dimple Dies, 2 Inch
Asin: B07B8VFC7P | Ean: 0686175658842 | UPC: 686175658842
Available In A Variety Of Sizes.
Maximum Material Thickness Application Is 16 Gauge (0.060").
All Sizes Feature A 1/4" Radius.
Dies Come With A Black Oxide Coating.
Features
- Sheet metal flared hole dimple dies
- Dies come with a black oxide coating
- Available in a variety of sizes
- All sizes feature a 1/4 radius
- Maximum material thickness application is 16 gauge (0.060)
- See more on Amazon...
Brand: Speedway Motors | Manufacturer: Speedway Motors
Dimensions: 2.50 x 5.50 x 4.50 Inches | Weight: 2.30 pounds
See On Amazon #16
6 Piece Dimple Die Set 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4"
Asin: B081C3Q7FY
Shave Weight-Add Structural Integrity- Make It Look Tough!!!!!.
Local United States Shipper.
6 Piece Set Includes All Our Popular Sizes.
Features
- Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
- 6 Piece Set Includes All Our Popular Sizes
- Shave weight-Add Structural Integrity- Make It Look Tough!!!!!
- Local United States Shipper
- See more on Amazon...
Brand: UTVDistribution
Dimensions: 3.00 x 9.00 x 6700.00 Inches | Weight: 13.00 pounds
See On Amazon #17
UTVDISTRIBUTION Dimple Die Set Sizes 1-1/4" 1-1/2" 1-3/4" 2" (4 Piece)
Asin: B0CYNBC8HY | Model: UTVD-DD-2-175-150-1250 | PartNumber: UTVD-DD-2-175-150-1250
Dies Are Cnc Machined From Premium Sae 8620 Steel With A Rockwell Hardness Of 80. Case Hardened..
For Use With Bolts Or Hydraulic Press.
Holes Must Be Drilled Before You Dimple The Materials..
Great Kit For Dimpling Panels On Vehicles Or In Hydraulic Press..
Kits Consists Of The Following Dies: 1 1/4" (1.250) 1 1/2" (1.500) 1 3/4"(1.750) 2" (2.00).
Features
- 4 Piece set with most popular sizes
- Kits consists of the following dies: 1 1/4 (1.250) 1 1/2 (1.500) 1 3/4(1.750) 2 (2.00)
- Dies are CNC machined from premium SAE 8620 steel with a Rockwell hardness of 80. Case Hardened.
- Great kit for dimpling panels on vehicles or in hydraulic press.
- For use with bolts or hydraulic press
- Holes must be drilled before you dimple the materials.
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDistribution
Weight: 14.00 Pounds
Warranty: No warranty
See On Amazon #18
3 Piece Dimple Die Set 1-1/4" 1-1/2'" 1-3/4""
Asin: B077ZMJ9SL
Designed From Premium Quality Materials For Years Of Service..
We Recommend No Thick Than 1/8" Steel, Aluminum, Stainless. Customers Have Dimpled 3/16".
Providing Quality Parts To The Fabrication Industry Since 2006..
Drill Or Punch Hole To Die Size And Dimple Away!.
These Are 8620 Tool Steel, Others Are Regular Steel. What You Pay For Is What You Get..
Best Selection Of Our Mid Size Dimple Dies. 1-1/4"-1-1/2'-1-3/4".
Features
- Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
- Best selection of our mid size dimple dies. 1-1/4-1-1/2'-1-3/4
- Designed from premium quality materials for years of service.
- These are 8620 tool steel, others are regular steel. What you pay for is what you get.
- Providing quality parts to the fabrication industry since 2006.
- Drill or punch hole to die size and dimple away!
- We recommend no thick than 1/8 steel, aluminum, stainless. Customers have dimpled 3/16
- See more on Amazon...
Brand: UTVDistribution | Manufacturer: UTVDistribution
Weight: 5.00 pounds
See On Amazon #19
USAReplacementparts Dimple Die Set 3 Piece 12 34 1 Metal Fabrication Tools Made in The USA
Asin: B0977Q1XPF | Model: DD3 | PartNumber: DD3 | Ean: 0600310740247 | UPC: 600310740247
Made In The Usa.
Brand: USAReplacementparts | Manufacturer: USAReplacementparts
See On Amazon
Looking For Something Else?
Search