Electroplated Iron Motor Guide Shaft Coupler Motor Shaft Coupler Motor Coupling Connector Flange Coupler 2 Pack for Couple Electric Motors 12mm ID X 18mm OD
Asin: B0CM5YX5PC | Model: Socobetai0rzubfdvw | PartNumber: Socobetai0rzubfdvw
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.A Flange Coupler Is A Kinds Of Special Coupler That Can Fix A Shaft On A Flat ..
This Type Of Coupling Is Mostly Used To Couple Electric Motors..
Made Of Premium Iron Material With Electroplating, These Couplers Are Sturdy And Durable..
Electroplated Iron, Good Resistance.
Features
- The coupler allows to mount other accessories on the shaft easily.
- Electroplated iron, good resistance
- A flange coupler is a kinds of special coupler that can fix a shaft on a flat .
- Made of premium iron material with electroplating, these couplers are sturdy and durable.
- This type of coupling is mostly used to couple electric motors.
- See more on Amazon...
Brand: Socobeta | Manufacturer: Socobeta
See On Amazon Similar To Electroplated Iron Motor Guide Shaft
#1
uxcell 10mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector Silver Tone 2 PCS for DIY Parts
Asin: B07PLBRMDQ | Model: B07PLBRMDQ | PartNumber: B07PLBRMDQ
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 10Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 10mm/0.39 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 10mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #2
uxcell 5mm Inner Dia H12*D10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2 PCS for DIY Parts
Asin: B07PLB2P4W | Model: a18121800ux0625 | PartNumber: a18121800ux0625
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 5Mm Flange Shaft Coupling, 4 X Fastening Screw( M3 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 5mm/0.19 inch, Total Height: 12mm/0.47 inch, Cylinder Outer Diameter: 10mm/0.39 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 22mm/0.87 inch, Base Height: 2mm/0.08 inch, Mounting Hole Distance: 16mm/0.63 inch,2 x M3 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 5mm Flange Shaft Coupling, 4 x Fastening Screw( M3 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #3
uxcell 6mm Inner Dia H12xD10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector for DIY Parts 4Pcs
Asin: B08NJH42GT | Model: a20091600ux0005 | PartNumber: a20091600ux0005
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package Including:4 X 6Mm Flange Shaft Coupling, 8 X Fastening Screw( M3 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 6mm/0.23 inch;Total Height: 12mm/0.47 inch;Cylinder Outer Diameter: 10mm/0.39 inch;Cylinder Height: 10mm/0.39 inch;Base Diameter: 22mm/0.86 inch;Base Height: 2mm/0.08 inch;Mounting Hole Distance: 16mm/0.63 inch;
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package Including:4 x 6mm Flange Shaft Coupling, 8 x Fastening Screw( M3 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 4mm Inner Dia H12*D10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2 PCS for DIY Parts
Asin: B07PDZD2Y6 | Model: B07PDZD2Y6 | PartNumber: B07PDZD2Y6
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 4Mm Flange Shaft Coupling, 4 X Fastening Screw( M3 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 4mm/0.16 inch, Total Height: 12mm/0.47 inch, Cylinder Outer Diameter: 10mm/0.39 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 22mm/0.87 inch, Base Height: 2mm/0.08 inch, Mounting Hole Distance: 16mm/0.63 inch,2 x M3 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 4mm Flange Shaft Coupling, 4 x Fastening Screw( M3 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 6mm Inner Dia H12*D10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2 PCS for DIY Parts
Asin: B07PDX8QG9 | Model: a18121800ux0626 | PartNumber: a18121800ux0626
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 6Mm Flange Shaft Coupling, 4 X Fastening Screw( M3 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 6mm/0.24 inch, Total Height: 12mm/0.47 inch, Cylinder Outer Diameter: 10mm/0.39 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 22mm/0.87 inch, Base Height: 2mm/0.08 inch, Mounting Hole Distance: 16mm/0.63 inch,2 x M3 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 6mm Flange Shaft Coupling, 4 x Fastening Screw( M3 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #6
uxcell 8mm Inner Dia H13xD10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector for DIY Parts Black 2pcs
Asin: B08MZ3ZHL8 | Model: a20091900ux0063 | PartNumber: a20091900ux0063
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Package Including:2 X 8Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc.
Features
- Material: Iron Plating;Color: Black;Inner Diameter: 8mm/0.31 inch;Total Height: 13mm/0.51 inch;Cylinder Outer Diameter: 16mm/0.63 inch;Cylinder Height: 11mm/0.39 inch;Base Diameter: 32mm/1.26 inch;Base Height: 2mm/0.08 inch;Screw Holding Degree: 90
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Package Including:2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
2PCS Black 6mm Flange Shaft Coupling High Hardness Metal Axis Bearing Fittings DIY Model Accessory Rigid Flange Guide Shaft Coupler Motor Connector
Asin: B0CWF9K31D
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.Please Feel Free To Tell Us Your Inquires And Issues, We Will Apply Questions For You And Give You The Pleasant Shopping Experience..
Package Include: 2 X 6Mm Flange Shaft Coupling + 1 X M3 Mini Hex Wrench + 4 X M3 Fastening Screw.
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Features
- Wide Range of Use: Flange Coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- Package Include: 2 x 6mm Flange Shaft Coupling + 1 x M3 Mini Hex Wrench + 4 x M3 Fastening Screw
- NOTE: Please confirm the size of your stepper motor shaft before purchasing.Please feel free to tell us your inquires and issues, we will apply questions for you and give you the pleasant shopping experience.
- See more on Amazon...
Brand: LULUQUEEN | Manufacturer: LULUQUEEN
Weight: 0.13 Pounds
See On Amazon #8
uxcell 7mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts
Asin: B07PFWQ8H9 | Model: a18121800ux0628 | PartNumber: a18121800ux0628
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 7Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 7mm/0.28 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 7mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #9
DMiotech 4 Pack 6mm Inner Dia H12xD10 Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with Screws for DIY RC Model Motors Silver
Asin: B0BKWD3YPH | Model: mif220914me0741 | PartNumber: mif220914me0741
Feature: Rigid Flange Coupling Is Made Of Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable, Longer Service Life, Easy To Install And Replace..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Size: Inner Diameter: 6Mm/0.23 Inch;Total Height: 12Mm/0.47 Inch;Cylinder Outer Diameter: 10Mm/0.39 Inch;Cylinder Height: 10Mm/0.39 Inch;Base Diameter: 22Mm/0.86 Inch;Base Height: 2Mm/0.08 Inch;Mounting Hole Distance: 16Mm/0.63 Inch;.
Features
- APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- SIZE: Inner Diameter: 6mm/0.23 inch;Total Height: 12mm/0.47 inch;Cylinder Outer Diameter: 10mm/0.39 inch;Cylinder Height: 10mm/0.39 inch;Base Diameter: 22mm/0.86 inch;Base Height: 2mm/0.08 inch;Mounting Hole Distance: 16mm/0.63 inch;
- FEATURE: Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- NOTE: Please confirm the size of your stepper motor shaft before purchasing
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #10
TA-VIGOR 2pcs 6mm Flange Coupling H12 x D10, 6mm Rigid Shaft Coupler Motor Connector with Screw Set for DIY RC Model Motors, High Hardness Coupling Connector
Asin: B0BWMY1BMC | Model: TK345 Set Screw | PartNumber: TK345 Set Screw
【Function】Flange Coupler Is Produced Based On International Flange Standard, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
【Wide Applications】Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
【Hard Material】 Coupling Connector Is Made By Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Heat And Electroplated Process Make It Sturdiness And Insulation. It Is More Stable And Easier For Installment And Replacement..
Features
- Specification Inner Diameter: 6mm/0.24 inch, Total Height: 12mm/0.47 inch, Cylinder Outer Diameter: 10mm/0.39 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 22mm/0.87 inch, Base Height: 2mm/0.08 inch, Mounting Hole Distance: 16mm/0.63 inch
- Hard Material coupling connector is made by iron plating, hardened by heat treatment, and then electroplated. Heat and electroplated process make it sturdiness and insulation. It is more stable and easier for installment and replacement.
- Function flange coupler is produced based on International Flange Standard, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Wide Applications Widely used in model shaft connection, perfect accessories for RC Model motor.
- See more on Amazon...
Brand: TA-VIGOR | Manufacturer: TA-VIGOR
See On Amazon #11
uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector Silver Tone 2 PCS for DIY Parts
Asin: B07PDZDHG2 | Model: a18121800ux0629 | PartNumber: a18121800ux0629
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 8Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts
Asin: B07PL9KBFV | Model: a18121800ux0632 | PartNumber: a18121800ux0632
Material: Iron Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 12Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 Inches
See On Amazon #13
DMiotech 2 Pack 8mm Inner Dia H13xD10 Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with Screws for DIY RC Model Motors Black
Asin: B0BKWB7H9M | Model: mif220914me0711 | PartNumber: mif220914me0711
Feature: Rigid Flange Coupling Is Made Of Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable, Longer Service Life, Easy To Install And Replace..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Size: Material: Iron Plating;Color: Black;Inner Diameter: 8Mm/0.31 Inch;Total Height: 13Mm/0.51 Inch;Cylinder Outer Diameter: 16Mm/0.63 Inch;Cylinder Height: 11Mm/0.39 Inch;Base Diameter: 32Mm/1.26 Inch;Base Height: 2Mm/0.08 Inch;Screw Holding Degree: 90.
Features
- APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- SIZE: Material: Iron Plating;Color: Black;Inner Diameter: 8mm/0.31 inch;Total Height: 13mm/0.51 inch;Cylinder Outer Diameter: 16mm/0.63 inch;Cylinder Height: 11mm/0.39 inch;Base Diameter: 32mm/1.26 inch;Base Height: 2mm/0.08 inch;Screw Holding Degree: 90
- FEATURE: Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- NOTE: Please confirm the size of your stepper motor shaft before purchasing
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #14
DMiotech 10mm Inner Dia H13xD16 Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with Screws for DIY RC Model Motors Silver
Asin: B0BKWHG6CB | Model: mif220914me0763 | PartNumber: mif220914me0763
Feature:Rigid Flange Coupling Is Made Of Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable, Longer Service Life,Easy To Install And Replace..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Size: Inner Diameter: 10Mm/0.39 Inch, Total Height: 13Mm/0.51 Inch, Cylinder Outer Diameter: 16Mm/0.63 Inch, Cylinder Height: 10Mm/0.39 Inch, Base Diameter: 32Mm/1.26 Inch, Base Height: 3Mm/0.12 Inch, Mounting Hole Distance: 24Mm/0.94 Inch,2 X M4 Fastening Screws.
Features
- APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- SIZE: Inner Diameter: 10mm/0.39 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws
- FEATURE:Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life,easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- NOTE: Please confirm the size of your stepper motor shaft before purchasing
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #15
DMiotech 2 Pack 8mm Inner Dia H13xD10 Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with Screws for DIY RC Model Motors Red
Asin: B0BKWDL36V | Model: mif220914me0710 | PartNumber: mif220914me0710
Feature: Rigid Flange Coupling Is Made Of Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable, Longer Service Life, Easy To Install And Replace..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Size: Material: Iron Plating;Color: Red;Inner Diameter: 8Mm/0.31 Inch;Total Height: 13Mm/0.51 Inch;Cylinder Outer Diameter: 16Mm/0.63 Inch;Cylinder Height: 10Mm/0.39 Inch;Base Diameter: 32Mm/1.26 Inch;Base Height: 2Mm/0.08 Inch;Screw Holding Degree: 90.
Features
- APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- SIZE: Material: Iron Plating;Color: Red;Inner Diameter: 8mm/0.31 inch;Total Height: 13mm/0.51 inch;Cylinder Outer Diameter: 16mm/0.63 inch;Cylinder Height: 10mm/0.39 inch;Base Diameter: 32mm/1.26 inch;Base Height: 2mm/0.08 inch;Screw Holding Degree: 90
- FEATURE: Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- NOTE: Please confirm the size of your stepper motor shaft before purchasing
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #16
DMiotech 2 Pack 12mm Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with M2 Hex Wrench and Screws for DIY RC Model Motors
Asin: B0BKWG17NH | Model: mif220914me0787 | PartNumber: mif220914me0787
Feature: Rigid Flange Coupling Is Made Of Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable, Longer Service Life, Easy To Install And Replace..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Size: Inner Diameter: 12Mm/0.47 Inch; Total Height: 13Mm/0.51 Inch; Cylinder Outer Diameter: 18Mm/0.7 Inch; Base Plate Diameter: 32Mm/1.25 Inch; Diagonal Screw Hole Distance: 24Mm/0.94 Inch; Base Plate Hole Diameter: 4Mm/0.16 Inch; Material: Iron Plating; Package Content: 2Pcs X Rigid Flange Coupling, 1Pcs X 2Mm Mini Hex Wrench, 4Pcs X M4 Fastening Screw..
Features
- APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- SIZE: Inner Diameter: 12mm/0.47 inch; Total Height: 13mm/0.51 inch; Cylinder Outer Diameter: 18mm/0.7 inch; Base Plate Diameter: 32mm/1.25 inch; Diagonal Screw Hole Distance: 24mm/0.94 inch; Base Plate Hole Diameter: 4mm/0.16 inch; Material: Iron Plating; Package Content: 2pcs x Rigid Flange Coupling, 1pcs x 2mm Mini Hex Wrench, 4pcs x M4 Fastening Screw.
- FEATURE: Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- NOTE: Please confirm the size of your stepper motor shaft before purchasing
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #17
uxcell 3.17mm Inner Dia H12D10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector for DIY Parts 4Pcs
Asin: B08NJH2PH4 | Model: a20091600ux0002 | PartNumber: a20091600ux0002
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package Including:4 X 3Mm Flange Shaft Coupling，8 X Fastening Screw.
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 3.17mm/0.12 inch;Total Height: 12mm/0.47 inch;Cylinder Outer Diameter: 10mm/0.39 inch;Cylinder Height: 10mm/0.39 inch;Base Diameter: 22mm/0.86 inch;Base Height: 2mm/0.08 inch;Mounting Hole Distance: 16mm/0.63 inch;
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package Including:4 x 3mm Flange Shaft Coupling 8 x Fastening Screw
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector for DIY Parts
Asin: B07PK6MG56 | Model: a18121800ux0621 | PartNumber: a18121800ux0621
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 1 X 12Mm Flange Shaft Coupling, 2 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 1 x 12mm Flange Shaft Coupling, 2 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #19
DMiotech 8mm Inner Dia H13xD10 Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with Screws for DIY RC Model Motors Red
Asin: B0BKWF8661 | Model: mif220914me0708 | PartNumber: mif220914me0708
Feature: Rigid Flange Coupling Is Made Of Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable, Longer Service Life, Easy To Install And Replace..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Size: Material: Iron Plating;Color: Red;Inner Diameter: 8Mm/0.31 Inch;Total Height: 13Mm/0.51 Inch;Cylinder Outer Diameter: 16Mm/0.63 Inch;Cylinder Height: 10Mm/0.39 Inch;Base Diameter: 32Mm/1.26 Inch;Base Height: 2Mm/0.08 Inch;Screw Holding Degree: 90.
Features
- APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- SIZE: Material: Iron Plating;Color: Red;Inner Diameter: 8mm/0.31 inch;Total Height: 13mm/0.51 inch;Cylinder Outer Diameter: 16mm/0.63 inch;Cylinder Height: 10mm/0.39 inch;Base Diameter: 32mm/1.26 inch;Base Height: 2mm/0.08 inch;Screw Holding Degree: 90
- FEATURE: Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- NOTE: Please confirm the size of your stepper motor shaft before purchasing
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon #20
DMiotech 4 Pack 5mm Inner Dia H12*D10 Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with Screws for DIY RC Model Motors Silver
Asin: B0BKW98DZX | Model: mif220914me0743 | PartNumber: mif220914me0743
Feature: Rigid Flange Coupling Is Made Of Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable, Longer Service Life, Easy To Install And Replace..
Note: Please Confirm The Size Of Your Stepper Motor Shaft Before Purchasing.
Function: Flange Shaft Coupling Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly.The Machine Is Not Easy To Separate During Operation..
Size: Inner Diameter: 5Mm/0.19 Inch;Total Height: 12Mm/0.47 Inch;Cylinder Outer Diameter: 10Mm/0.39 Inch;Cylinder Height: 10Mm/0.39 Inch;Base Diameter: 22Mm/0.86 Inch;Base Height: 2Mm/0.08 Inch;Mounting Hole Distance: 16Mm/0.63 Inch;.
Features
- APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- SIZE: Inner Diameter: 5mm/0.19 inch;Total Height: 12mm/0.47 inch;Cylinder Outer Diameter: 10mm/0.39 inch;Cylinder Height: 10mm/0.39 inch;Base Diameter: 22mm/0.86 inch;Base Height: 2mm/0.08 inch;Mounting Hole Distance: 16mm/0.63 inch;
- FEATURE: Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
- FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
- NOTE: Please confirm the size of your stepper motor shaft before purchasing
- See more on Amazon...
Brand: DMiotech | Manufacturer: DMiotech
See On Amazon
Looking For Something Else?
Search