Floyutin Stainless Heavy Duty M8 Locking Carabiner Snap Hooks with Screw Nut Connector Chains Links Hardware Fasteners, 5 PCS
Asin: B0CM8FQWF9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Max Work Load: 304 Stainless Steel Carabiners, The Max Load Capacity Just 200Lb(100Kg) . Don't Exceed The Max Load For Safety. They Stay Screwed Tight Yet Unscrew Easily When Needed.To Open And Anti-Clockwise To Close..
Including: 5 Pcs M8 Stainless Spring Snap Hooks ..
Multi-Purpose Application: Can Link,Hook,Connect,Repair,Replacement,Lock. Widely Used For Chains,Ropes,Cables And Webbing..
Easy Use: Screw Nut And Spring Snap Hook Design. Easy To Open And Close The Screw Down Nut. Twist Clockwise The Thread By Hand. Note The Opening Size (9Mm Clearance When Max Opening). They Are Small Carabiner Clips..
Features
- Note Size(Appr.): M8 heavy duty snap hook with screw locking. M8 stands for the snap hook's gauge, 8mm in thick, 80mm in outside length, 22mm in max insider width at the larger end. 12mm in mini insider width at the small end. 9mm in gate opening . Solid connections with a polished finish, no sharp edges.Lightweight but Strength, 70g/pcs
- Easy Use: Screw nut and spring snap hook design. Easy to open and close the screw down nut. Twist clockwise the thread by hand. Note the opening size (9mm clearance when max opening). They are small carabiner clips.
- Max Work Load: 304 Stainless steel carabiners, the max load capacity just 200LB(100kg) . Don't exceed the max load for safety. They stay screwed tight yet unscrew easily when needed.to open and anti-clockwise to close.
- Multi-purpose Application: Can link,hook,connect,repair,replacement,lock. Widely used for chains,ropes,cables and webbing.
- Including: 5 pcs M8 stainless spring snap hooks .
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
See On Amazon Similar To Floyutin Stainless Heavy Duty M8
#1
Floyutin Stainless M8 Eyebolt 0.79"(20mm) Long Male Ring Threaded Screw Lifting Shoulder Eye Bolts with Nuts Washers,10 PCS
Asin: B0B5K8BXV6 | Model: FC3A103 | PartNumber: FC3A103 | Ean: 0613852545270 | UPC: 613852545270
Fast And Easy Use: With Eye Screw Or Hook Screw At The End, Easy Connect To Fixed Eyes,Jaws Or Loops Ropes And Cables. Drill The Small Hole And Install A Shoulder Eye. Note The Size(M8x20mm). 20Mm Rope Diameter Will Fit Through The Eye Loop..
Including: 10 Pcs 304 Stainless Screw Eyebolts And Matching Nuts And Washers.
Multi-Purpose Application: The Eye Bolt Can Be Mounted In The Hole With Drill Bit. Very Tough And Great For String Lights. Hanging Some Decoration And Lightening Lights. Work Perfectly For A Clothesline, Wire Rope,Chainlink Fence..
Small Screw Eye Bolt. Closed Loop At End And Threads At The Other End. Designed With Shoulder So That It Can Be Tightened In Place. Single Eye Hook Screw Maximum Load 80Kg..
Features
- Note Size(Appr.): 304 Stainless Metric screw thread. M stands for Metric thread diameter. M8 eyebolts,that is the screw thread diameter is 0.31"(7.9mm), thread shank length is 0.79"(20mm). Thread pitch is 1.25mm. the round inner diameter is 0.75"(19.1mm), round thickness is 0.28"(7mm). Total length is 2.13"(54mm)(to eye). Solid connections with a polished finish, no sharp edges.
- Small Screw Eye Bolt. Closed loop at end and threads at the other end. Designed with shoulder so that it can be tightened in place. Single eye hook screw maximum load 80kg.
- Fast and Easy Use: with eye screw or hook screw at the end, Easy connect to fixed eyes,jaws or loops ropes and cables. Drill the small hole and install a shoulder eye. NOTE the size(M8X20mm). 20mm rope diameter will fit through the eye loop.
- Multi-purpose Application: The eye bolt can be mounted in the hole with drill bit. Very tough and great for string lights. hanging some decoration and lightening lights. Work perfectly for a clothesline, wire rope,chainlink fence.
- Including: 10 pcs 304 Stainless screw eyebolts and matching nuts and washers
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
See On Amazon #2
Floyutin 10 Pcs M8 Stainless Lifting Eye Nuts Thread Ring Shoulder Metric EyeNuts Fastener
Asin: B0BHVFM2W1 | Model: FC3A303 | PartNumber: FC3A303 | Ean: 0613852533727 | UPC: 613852533727
Fast And Easy Use: Use Carriage Bolt Or Apprapriate Sized Bolts To Mount These. Or Using D Ring To Attach Weights. Replace The Old Nuts. Good Anchor Point Using A Turnbuckle. Note The Thread Size(M8). 19Mm Rope Diameter Will Fit Through The Eye Loop..
Made Of 304 Stainless Steel, Sturdy And Durable, Highest Quality Hardware.10 Pcs Threaded Included..
Multi-Purpose Application: The Eye Nut Can Be Mounted With Bolts. Used It For Quick Disconnect On Bolted Connection.Very Tough And Great For String Lights. Hanging Some Decoration And Lightening Lights. Work Perfectly For A Sailboat,Camera Tripods, Small Swing, Wood Spinners.Thin Cable Or Chain.
Small Eye Nuts, These Are Metric Internally Threaded. Serve As A Nut, Just Screw It On The End Of A Bolt. When Use It With Bolts, The Bolt Will Bottom Out In This So Length Of Bolt Will Matter For Most Applications. Single Eye Nut Maximum Load 80Kg..
Features
- Measurement (Appr.): 304 Stainless Metric thread. M stands for Metric thread diameter. M8 ,that is the thread inner diameter 0.28"(7mm), thread outer diameter 0.68"(17.3mm). Thread pitch 1.25mm. the round inner diameter 0.77"(19.5mm), the round outer diameter 1.35"(34.2mm), round thickness 0.28"(7.1mm). Total length 1.39"(35.4mm)(nut to eye).
- Small Eye Nuts, These are metric internally threaded. Serve as a nut, just screw it on the end of a bolt. When use it with bolts, The bolt will bottom out in this so length of bolt will matter for most applications. Single eye nut maximum load 80kg.
- Fast and Easy Use: Use carriage bolt or apprapriate sized bolts to mount these. or using D ring to attach weights. replace the old nuts. Good anchor point using a turnbuckle. NOTE the thread size(M8). 19mm rope diameter will fit through the eye loop.
- Multi-purpose Application: The eye nut can be mounted with bolts. Used it for quick disconnect on bolted connection.Very tough and great for string lights. hanging some decoration and lightening lights. Work perfectly for a sailboat,camera tripods, small swing, wood spinners.Thin cable or chain
- Made of 304 stainless steel, sturdy and durable, Highest quality hardware.10 pcs threaded included.
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
See On Amazon #3
Floyutin 1.8 inch Small Carabiner Clip with Fixed Eyelet Ended Snap Hooks Quick Paracord Clips 18 Packs(Silver+Black)
Asin: B0B71DFKL4 | Ean: 0613852538661 | UPC: 613852538661
Size(Appr.): M8 With Round Hole, 3" In Length, 0.3" In Diameter, 1.57" In Max Width. Good Quality With A Polished Finish. Strong And Durable, No Sharp Edges.
Size(Appr.): M8 With Round Hole, 3" In Length, 0.3" In Diameter, 1.57" In Max Width. Good Quality With A Polished Finish. Strong And Durable, No Sharp Edges.
Size(Appr.): M8 With Round Hole, 3" In Length, 0.3" In Diameter, 1.57" In Max Width. Good Quality With A Polished Finish. Strong And Durable, No Sharp Edges.
Size(Appr.): M8 With Round Hole, 3" In Length, 0.3" In Diameter, 1.57" In Max Width. Good Quality With A Polished Finish. Strong And Durable, No Sharp Edges.
Features
- SIZE(Appr.): M8 with round hole, 3" in length, 0.3" in diameter, 1.57" in max width. Good quality with a polished finish. Strong and durable, no sharp edges
- SIZE(Appr.): M8 with round hole, 3 in length, 0.3 in diameter, 1.57 in max width. Good quality with a polished finish. Strong and durable, no sharp edges
- SIZE(Appr.): M8 with round hole, 3 in length, 0.3 in diameter, 1.57 in max width. Good quality with a polished finish. Strong and durable, no sharp edges
- SIZE(Appr.): M8 with round hole, 3 in length, 0.3 in diameter, 1.57 in max width. Good quality with a polished finish. Strong and durable, no sharp edges
- SIZE(Appr.): M8 with round hole, 3 in length, 0.3 in diameter, 1.57 in max width. Good quality with a polished finish. Strong and durable, no sharp edges
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #4
Floyutin 6 Packs Stainless M8x50MM Expansion Eyebolt Assembled Bolt with Eye Nut Wahser Ring Anchor 50mm Screw Thread
Asin: B0BXLDHT22
Easy To Use:Expansion Is Created By Tightening A Threaded Bolt.Drill The Hole With Drill Bit,Then Titighten The Nut With A Wrench.Note Right Hole Size(5Mm Deeper Than The Length Of Expansion Tube).M6 Series With M10 Drill Bit, M8 Series With M12 Drill Bit.Keep The Nut On It When Drilling..
Including: 6 Pcs 304 Stainless Expansion Eyebolts Sets.Made Of 304 Stainless Steel, Good Solid .Corrosion Resistant,Sturdy And Durable, Highest Quality Hardware.Solid Connections With A Polished Finish, No Sharp Edges..
Multi-Purpose Application: The Expansion Bolt Must Be Installed On A Relatively Hard Base Material. It Can Not Be Installed Stably In Soft And Easy To Fall Off Places, Such As The Mortar Joint Of The Wall. Generally Used For Fastening Protective Fence, Canopy, Air Conditioner, Etc..
Assembled Eyebolt, No Permanet Bolt. Can Be Detachabl.Contains 1X Eye Nut+2X Washer Loops+1X Screw+1X Tube. Closed Loop At End And Threads At The Other End. It Can Be Tightened In Place. Single Expansion Bolt Maximum Load 150Kg..
Features
- Note Size(Appr.): M8x50mm 304 Stainless Metric Internal Expansion EyeBolt. M8 stands for Metric thread inner diameter(8mm/0.31"), Head screw long 2"(50mm). Expansion tube diameter 0.45"(11.5mm).Total length 3"(76mm)(screw to eye). the Ring inner diameter 0.82"(21mm) , ring thick 0.25"(6.5mm). Weight:2oz/56g
- Assembled EyeBolt, NO PERMANET BOLT. Can be detachabl.Contains 1x eye nut+2x washer loops+1x screw+1x tube. Closed loop at end and threads at the other end. it can be tightened in place. Single Expansion bolt maximum load 150kg.
- Easy to Use:Expansion is created by tightening a threaded bolt.Drill the hole with drill bit,then tiTighten the nut with a wrench.NOTE right hole size(5mm deeper than the length of expansion tube).M6 series with M10 drill bit, M8 series with M12 drill bit.Keep the nut on it when drilling.
- Multi-purpose Application: The expansion bolt must be installed on a relatively hard base material. It can not be installed stably in soft and easy to fall off places, such as the mortar joint of the wall. Generally used for fastening protective fence, canopy, air conditioner, etc.
- Including: 6 pcs 304 Stainless Expansion eyebolts sets.Made of 304 stainless steel, good solid .corrosion resistant,sturdy and durable, Highest quality hardware.Solid connections with a polished finish, no sharp edges.
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
See On Amazon #5
Floyutin 50 pcs M8x30mm(OD) Stainless Fender Flat Washer Large for Screw Hardware Lock 2mm Thick
Asin: B0B389TFJF | Model: FS1B202 | PartNumber: FS1B202 | Ean: 0613852548073 | UPC: 613852548073
Multi-Purpose Application: Commonly Used In Household. With Threaded Bolts, Screws, Nuts And Flat Finishing Washers To Tie Together To Prevent Through. Build And Repair Furniture, Digital Products. And So On..
Material: Made Of High Quality 304 Stainless Steel,No Magnetic. Smooth Polished Surface, No Sharp Edges. Rust And Corrosion Resistance, Sturdy And Durable..
Including: Contains 50 Pcs Different 304 Stainless Steel Flat Washers.
Fast And Easy Use: Crush Washers Are Round And Flat With Hole. Note The Space Between The Lock Nut And Nut (2Mm Thickness). All Screws Depends On The Inside Diameter. That Means M8 Washer Fit With M8 Screws/Bolt Shanks..
Features
- Note Size(Appr.): Metric flat washer assortment sets. M8 stands for the inside diameter of washer, means 8mm (1mm=.039 inch) in I.D. ALL washers are SAME thickness(2mm), and All washers with a wider outside diameter(30mm) Note Inside Diameter is the hole diameter, outside diameter is the round diameter.
- Fast and Easy Use: Crush washers are round and flat with hole. Note the space between the lock nut and nut (2mm Thickness). All screws depends on the inside diameter. that means M8 washer fit with M8 screws/bolt shanks.
- Multi-purpose Application: Commonly used in household. with threaded bolts, screws, nuts and flat finishing washers to tie together to prevent through. Build and repair furniture, digital products. and so on.
- Including: Contains 50 pcs different 304 Stainless steel flat washers
- Material: Made of high quality 304 stainless steel,no magnetic. Smooth polished surface, no sharp edges. rust and corrosion resistance, sturdy and durable.
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
See On Amazon #6
Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit
Asin: B0BVZC4SX7 | Model: FN3A402 | PartNumber: FN3A402
Easy To Install: Serve As A Nut, Use Metric Screws Or Apprapriate Sized Bolts To Mount Ss Wing Nuts. Just Spin On On Easily, Tighten Nicely, And Stay In Place. Please Choice The Right Metric Thread Size Match Bolts Or Screws And Driver..
10 Pcs Wingnuts Included. No Bolts/Dirver Included. Made Of 304 Stainless Steel, Good Solid .Corrosion Resistant,Sturdy And Durable, Highest Quality Hardware..
Multi-Purpose Application: Ss Heavy Duty Threaded Can Be Mounted With Bolts. Used It For Quick Disconnect On Bolted Connection.Just For Hanging Bird Houses,Furniture Decoration,Hardware Lighting, Marine Battery Posts. Better Replace The Old Nuts For Getting Adjusted Or Temporarily Removed Pretty Often..
Thumb Nuts With 2 Butterfly Wing On Each Side. Hand Twist Without Tools, Fit For Finger Tightening Or Lossening. Allows You To Adjust The Tightness Of The Legs Easily. Wings Are Thick(0.34") And Don't See An Issue With Any Bend Distortion..
Features
- Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes.
- Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34) and don't see an issue with any bend distortion.
- Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver.
- Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often.
- 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and durable, Highest quality hardware.
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
See On Amazon #7
Floyutin 3 PCS Stainless C Clamps 30cm Wide Jaw Openings Tiger U Clamp with Hex Nut Bolt
Asin: B0CNC3FWLW
Easy To Use: With Wrench To Tighten The Nuts To Lock In The Depth Position.With 2 Threaded Holes On The Top And Side, Can Easily Connect Hooks Or Eye Bolts,The Nut And Lock Washer Increase Versatility..
Including: 3 Pcs 304 Stainless Tiger C-Clamps,Made From Heavy-Duty 304 Stainless Steel, Solid Connections With A Polished Finish, No Sharp Edges.Rust-Proof, Wear-Resistant, And Corrosion-Resistant..
Widlely Applicable: C Clamps Get A Good Steady Hold On What You Are Working With Small Projects.Making Your Own Fixtures And Clamps.Such As Woodworking,Metalworking,Clampling,Mountingwood,Diy, Assembly, Household Clamping Projects..
Small But Strong Clamps,Lightweight,Works Well For Short Clamp Distances.Handy For Many Small Clamping Situations. Note The Jaw Mouth Size,Only Less 1 Inch Or Smaller Pieces. Just For Wood, Metal, Clothes Line Or Anything You Need To Clamp Or Hold In Place..
Features
- Note Size(Appr.): M8 tiger u clamps, opening mouth 1.2inch/30mm Max clamp rang 0.9in/23mm. 304 Stainless Metric thread Bolt. M stands for Metric thread diameter. for M8 Hex thread bolt,the thread diameter is 0.31"(7.9mm), thread shank length is 1.46"(37mm).Thread pitch is 1.25mm.Total length is 2"(50mm)(from thread to washer).
- Small but strong clamps,Lightweight,works well for short clamp distances.Handy for many small clamping situations. Note the jaw mouth size,only less 1 inch or smaller pieces. Just for Wood, Metal, clothes line or anything you need to clamp or hold in place.
- Easy to Use: With wrench to tighten the nuts to lock in the depth position.with 2 threaded holes on the top and side, can easily connect hooks or eye bolts,The nut and lock washer increase versatility.
- Widlely applicable: C clamps get a good steady hold on what you are working with small projects.making your own fixtures and clamps.such as woodworking,metalworking,clampling,mountingwood,DIY, assembly, household clamping projects.
- Including: 3 pcs 304 Stainless tiger c-clamps,Made from heavy-duty 304 stainless steel, Solid connections with a polished finish, no sharp edges.rust-proof, wear-resistant, and corrosion-resistant.
- See more on Amazon...
Brand: Floyutin | Manufacturer: Floyutin
See On Amazon
Looking For Something Else?
Search