Frontpage > Product > Audiosavings Bundle: (1) Jbi Csma280 Commercial Amplifier Bundle With (4) Jbi Control 25-1 5.25" Wal...

Audiosavings Bundle: (1) JBI CSMA280 Commercial Amplifier Bundle with (4) JBI Control 25-1 5.25" Wall-Mount Speakers + (2) JBI CSR-V Volume Controller and (8) JBI 8124 4" Ceiling Speakers (7 Items)

Asin: B0CM9JHZQM   |   Model: CSMA280+(2) Control 25-1+(2) CSR-V-BLK 2   |   PartNumber: CSMA280+(2) Control 25-1+(2) CSR-V-BLK 2

As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

Insertion Loss: 1 Db Maximum For 70 And 100 V Outputs, Continuous Power: 10 W Per Channel, Line Output Level: 5.0 V Rms Into 10 Kohms, Input Sensitivity: To Obtain Full Rated Power At 8 Ohms (Or 5 Vrms To Line Output). Mic Input: 3 Mv Rms. Line Input: 775 Mv Rms. Rca Input: 300 Mv Rms, Number Of Channels: Input: 8, Output: 2, Frequency Response: Measured At 2.83 V Rms Into Rated Load Impedance At Any Output. 4/8 Ohms Output: 20 Hz - 20 Khz, ±2 Db. 70 V/100 V Outputs: 80 Hz - 15 Khz ±2 Db..
Jbi Csr-V Black Wall Volume Controller For Select Csm/Csma/Vma Mixer Amplifiers, Color: Black, For Csm-21 & Csm-32 Mixers, Controls Volume, Dual Rj45 Connectors, Uses Cat 5 Cable. (4) Jbi 8124 4" Full Range 70V/100V 6 Watt Commercial Ceiling Speakers For Restaurant/Bar/Cafe, Component: 4" Full-Range Driver..
Durable, Weatherized Enclosures, Invisiball Mounting Hardware, Zinc-Plated Grilles, Good For Off-Axis Listening, 60 Hz To 20 Khz Frequency Response. Power Rating: 200 W Continuous Program (2 H). 100 W (400 W Peak), Continuous Pink Noise (2 H). 75 W (300 W Peak) Continuous Pink Noise (100 H), Nominal Impedance: 8 Ohms (Thru Setting), Maximum Input Voltage: 25.3 V Rms (2 H), 50.6 V Peak, Frequency Response± 3Db: 85 Hz To 17 Khz, Frequency Response ±10 Db: 60 Hz To 20 Khz..
Sensitivity: 90 Db, 1 W / 1 M (Average 100 Hz To 10 K Hz), Coverage Angle: 100° X 100°, Directivity Factor: 6.0 (Averaged 1 Khz To 16 Khz), Directivity Index: 7.6 Db (Averaged 1 Khz To 16 Khz), Crossover Type: 2Nd Order Low-Pass, 2Nd Order High-Pass, Transformer Taps: 70 V: 30 W, 15 W, 7.5 W, 3.7 W, 100 V: 30 W, 15 W, 7.5 W. Insertion Loss < 0.94 Db At Any Tap Setting. Thru Setting: 8 Ohms Nominal, Recommended Protective High-Pass: 60 Hz High-Pass (24 Db/Oct)..
1 X Power Switch, 2 X Bass Potentiometers, 2 X Treble Potentiometers. Rear Panel: 2 X Input-Routing Dip Switches (Including Phantom And Hi-Z Switches), 8 X Mic/Line Selector Switch, 2 X Vox Adjustment Switches, Indicators: Front Panel: 8 X Input Signal Presence Ring, Green, 2 X Output Volume Ring, Green, 1 X Power Switch Ring, Green/Blue, Connectors: Rear Panel: 1 X Iec Power Input, 2 X Aux Out Connection Points , 6 X 3-Pin Euroblock Connectors, 6 X 3-Pin Euroblock Connectors..
Operating Temperature / Humidity: 32 To 95°F / 0 To 35°C, 95% Rh (Non-Condensing), Storage Temperature: -4 To 185°F / -20 To 85°C, Phantom Power: 27 Vdc, Ac Input: 100-240 Vac, 50/60 Hz, Dimensions (W X D X H): 17.2 X 11.9 X 1.7" / 436.9 X 302.3 X 43.2 Mm, Weight: Approximately 11.9 Lb / 5.4 Kg. 2 Jbi Control 25-1 5.25" 100W Black Surface-Mount Speakers 4 Home/Restaurant/Bar, 5.25" Woven-Fiberglass Lf Drivers, 0.75" Pei Diaphragm Tweeters, 200W Rms At 8 Ohms..
Total Harmonic Distortion (Thd): Measured At 2.83 V Rms Into Rated Load Impedance At Any Output. Power Amplifier Output: <0.5%, 20 Hz To 20 Khz. Line Output: 0.05% Typical, Signal To Noise Ratio: > 90 Db, Nominal Input Impedance: Mic: 400 Ohms. Line: 20 Kohms (Balanced). Rca: 50 Kohms, Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms, Crosstalk: -70 Db @ 1 Khz, Front Panel: 8 X Input Level Rotary Knobs, 2 X Output Volume-Attenuating Knobs..
Lf Driver Size: 5.25" / 135 Mm, Hf Driver Size: 0.75" / 19 Mm, Driver Type: Lf Driver: Woven-Fiberglass Cone With Pure Butyl Rubber Surround With Weather-Edge Frame Protection, High-Temp Kapton Voice Coil Former, High-Temp Voice Coil Wire, Optimized Cone Geometry, Linear Suspension Spider, And Fea Optimized Motor Structure. Hf Driver: Pei Diaphragm, Low-Viscosity Ferro-Magnetic Fluid, And Kapton Voice Coil Former..
Jbi Csma280 Commercial/Restaurant 2 X 80W Amplifier 4Ohm/8Ohm/70V/100V And 8 Inputs, For Commercial And Industrial Use, 80W Into 8 Or 4 Ohm Loads, 10W Per Channel, 8 Input Channels, 2 Output Channel, Usable With 70 & 100V Systems, Euroblock Mic/Line & Rca Inputs, Hi-Z & 27V Phantom Power Switches, Sleep Mode & 2 Auxiliary Outputs, Voice Activated Ducking & Priority Mute. Maximum Output Power: 800 W Per Channel Into 4 Ohms Or 8 Ohms, 1 Khz, = 0.5% Thd..

Features

  • Package Includes: (1) JBI CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs, (2) Pair of JBI Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers, (2) JBI CSR-V Black Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers, (2) Pairs of JBI 8124 4" Full Range Commercial 70V/100V 6w Ceiling Speakers 4 Restaurant.
  • JBI CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V and 8 inputs, For Commercial and Industrial Use, 80W into 8 or 4 Ohm Loads, 10W Per Channel, 8 Input Channels, 2 Output Channel, Usable with 70 & 100V Systems, Euroblock Mic/Line & RCA Inputs, Hi-Z & 27V Phantom Power Switches, Sleep Mode & 2 Auxiliary Outputs, Voice Activated Ducking & Priority Mute. Maximum Output Power: 800 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD.
  • Insertion Loss: 1 dB maximum for 70 and 100 V outputs, Continuous Power: 10 W per channel, Line Output Level: 5.0 V RMS into 10 kOhms, Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS, Number of Channels: Input: 8, Output: 2, Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz 2 dB.
  • Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical, Signal to Noise Ratio: > 90 dB, Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms, Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms, Crosstalk: -70 dB @ 1 kHz, Front Panel: 8 x Input level rotary knobs, 2 x Output volume-attenuating knobs.
  • 1 x Power switch, 2 x Bass potentiometers, 2 x Treble potentiometers. Rear Panel: 2 x Input-routing dip switches (including phantom and Hi-Z switches), 8 x Mic/Line selector switch, 2 x Vox adjustment switches, Indicators: Front Panel: 8 x Input signal presence ring, green, 2 x Output volume ring, green, 1 x Power switch ring, green/blue, Connectors: Rear Panel: 1 x IEC power input, 2 x Aux out connection points , 6 x 3-pin euroblock connectors, 6 x 3-pin euroblock connectors.
  • Operating Temperature / Humidity: 32 to 95 F / 0 to 35 C, 95% RH (non-condensing), Storage Temperature: -4 to 185 F / -20 to 85 C, Phantom Power: 27 VDC, AC Input: 100-240 VAC, 50/60 Hz, Dimensions (W x D x H): 17.2 x 11.9 x 1.7 / 436.9 x 302.3 x 43.2 mm, Weight: Approximately 11.9 lb / 5.4 kg. 2 JBI Control 25-1 5.25 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar, 5.25 Woven-Fiberglass LF Drivers, 0.75 PEI Diaphragm Tweeters, 200W RMS at 8 Ohms.
  • Durable, Weatherized Enclosures, InvisiBall Mounting Hardware, Zinc-Plated Grilles, Good for Off-Axis Listening, 60 Hz to 20 kHz Frequency Response. Power Rating: 200 W continuous program (2 h). 100 W (400 W peak), continuous pink noise (2 h). 75 W (300 W peak) continuous pink noise (100 h), Nominal Impedance: 8 ohms (THRU setting), Maximum Input Voltage: 25.3 V RMS (2 h), 50.6 V peak, Frequency Response 3dB: 85 Hz to 17 kHz, Frequency Response 10 dB: 60 Hz to 20 kHz.
  • Sensitivity: 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz), Coverage Angle: 100 x 100 , Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz), Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz), Crossover Type: 2nd order low-pass, 2nd order high-pass, Transformer Taps: 70 V: 30 W, 15 W, 7.5 W, 3.7 W, 100 V: 30 W, 15 W, 7.5 W. Insertion loss < 0.94 dB at any tap setting. Thru setting: 8 Ohms nominal, Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct).
  • LF Driver Size: 5.25 / 135 mm, HF Driver Size: 0.75 / 19 mm, Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF Driver: PEI diaphragm, low-viscosity ferro-magnetic fluid, and Kapton voice coil former.
  • JBI CSR-V Black Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers, Color: Black, For CSM-21 & CSM-32 Mixers, Controls Volume, Dual RJ45 Connectors, Uses Cat 5 Cable. (4) JBI 8124 4 Full Range 70V/100V 6 Watt Commercial Ceiling Speakers for Restaurant/Bar/Cafe, Component: 4 Full-Range Driver.
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Warranty: 3 Year

Amazon Price: $1,726.72 | as of 06/05/2024 (3:08pm pst) *DETAILS
Availability: In Stock

See On Amazon




Similar To Audiosavings Bundle 1 JBI CSMA280

  #1

Audiosavings Bundle: (4) 2 JBI Control 64P/T 4" 30w Commercial 70v Black Hanging Pendant Speakers C64P/T

Asin: B0CLFW9XCJ   |   Model: (4) C64P/T   |   PartNumber: (4) C64P/T

Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W 100V: 30W, 15W, 7.5W. Transformer Insertion Loss: 0.94Db @ 3.7W, 0.89Db @ 7.5W, 0.83Db @ 15W, 0.94Db @ 30W. Drivers: 100 Mm (4 In) Polypropylene-Coated Paper With Cloth Surround, 20 Mm (0.8 In) Copper Voice Coil. Enclosure: High Impact Polystyrene. Grille: Zinc-Plated Steel Grille With Powder-Coat Finish, Foam Backing (Removable For Painting).
Suspension: Two Identical Suspension Systems (One As Main Suspension Cable And The Other As Safety Cable), Each Consisting Of 4.5 M (15 Ft) Long 2 Mm (0.077 In) High-Tensile Galvanized-Steel Wire Rope Suspension Cable With Spring-Clips For Clipping Onto The Loudspeaker Bracket And Gripple Brand Adjustable-Height Cable Fasteners For Infinitely Adjustable Height. Cables Have Swl Rating Of 45 Kg (99 Lb)..
Outdoor Capability: Exceeds Mil Spec 810 For Humidity, Salt Spray, Temperature & Uv. Ip44 Capability Per Iec 529 - Splash-Proof Rating.. Input Connectors: Two Removable Locking Euro-Block 2-Pin Connectors With Screw-Down Terminals For Bare Wire. Connectors Paralleled For Input And Loop-Thru. Max. Wire 12 Awg (2.5 Mm2). Rubber Terminal Covers Included..
Frequency Response (±3 Db): 85Hz - 14 Khz. Power Rating: 100 W Continuous Program (2 Hrs) 50 W (200W Peak), Continuous Pink Noise (2 Hrs) 40 W (160W Peak) Continuous Pink Noise (100 Hrs). Maximum Input Voltage: 18.2 V Rms (2 Hrs), 36.4 V Peak. Nominal Sensitivity: 88 Db Nominal. Coverage Angle: 120° (Averaged 1 Khz To 4 Khz). Directivity Factor (Q): 6.2. Directivity Index (Di): 7.3Db (Averaged 1Khz - 16Khz). Maximum Spl (1M): 105 Db Continuous Pink Noise, 111 Db Peak. Impedance: 8O.

Features

  • Package Includes: (4) 2) JBI Control 64P/T 4" 30w Commercial 70v Black Hanging Pendant Speakers C64P/T. Features: 100 mm (4 in) full-range driver with polypropylene-coated cone and 20 mm (0.8 in) high temperature voice coil.. Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp.. Stylish design, available in black or white (-WH).. UL listed (speaker and hanging cable system).. 8O and 70V/100V operation. Specifications: Frequency Range (-10dB): 65 Hz - 15 kHz
  • Frequency Response ( 3 dB): 85Hz - 14 kHz. Power Rating: 100 W Continuous Program (2 hrs) 50 W (200W peak), Continuous Pink Noise (2 hrs) 40 W (160W peak) Continuous Pink Noise (100 hrs). Maximum Input Voltage: 18.2 V RMS (2 hrs), 36.4 V peak. Nominal Sensitivity: 88 dB Nominal. Coverage Angle: 120 (averaged 1 kHz to 4 kHz). Directivity Factor (Q): 6.2. Directivity Index (DI): 7.3dB (averaged 1kHz - 16kHz). Maximum SPL (1m): 105 dB continuous pink noise, 111 dB peak. Impedance: 8O
  • Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W 100V: 30W, 15W, 7.5W. Transformer Insertion Loss: 0.94dB @ 3.7W, 0.89dB @ 7.5W, 0.83dB @ 15W, 0.94dB @ 30W. Drivers: 100 mm (4 in) polypropylene-coated paper with cloth surround, 20 mm (0.8 in) copper voice coil. Enclosure: High impact polystyrene. Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
  • Outdoor Capability: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splash-proof rating.. Input Connectors: Two removable locking euro-block 2-pin connectors with screw-down terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
  • Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 13.00 x 11.00 x 11.00 Inches

Amazon Price: $1,260.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #2

Audiosavings Bundle: (4) JBI AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker

Asin: B0CLFXDS66   |   Model: (4) AWC82   |   PartNumber: (4) AWC82

Coverage Pattern: 120° X 120°. Directivity Factor (Q): 8.1 (1 K – 16 Khz). Directivity Index (Di): 8.4 Db (1 K – 16 Khz). System Power Rating: 250 W 2 Hrs. 200 W 100 Hrs. Sensitivity (2.83V @ 1M): 94 Db (Ave. 100 Hz – 20 Khz). Maximum Spl (1M): Direct 8O: 118 Db (Peaks Of 124 Db) 200 W Tap: 117 Db. Crossover Network: 1.8 Khz, 3Rd Order (18 Db/Oct) High-Pass Plus Conjugate To Hf, 2Nd Order Low-Pass To Lf. Nominal Impedance: 8 Ohms. Transformer Taps: 70V: 200W, 100W, 50W, 25W100v: 200W, 100W, 50W.
Grille: Corrosion-Resistant Zinc-Rich Extra-Thick Powder Coated Steel Grille, 3-Layer Assembly With Foam And Woven Poly Mesh Backing..
Lf Driver: Kevlar-Reinforced Cone With Weather Treatment, 50 Mm (2 In) Voice Coil.. Hf Driver: 25 Mm (1 In) Diaphragm And Voice Coil Diameter, High Temperature Polymer Diaphragm, Patented Design, Fluid-Cooling.. Hf Driver Protection: Minimum Audibility Sonicguard Hf Overload Protection. Enclosure: Abs With Glass Enclosure, Heavily Braced. Attachment: Two M10 (Fine-Thread) Points For Included U-Bracket. M6 Secondary Safety Attachment Point On Back Panel..
Advanced High-Slope Crossover Network For Constant Coverage And Smooth, Natural Midrange.. 250 Watt Power Handling (Average Continuous Pink Noise) With High Sensitivity Provides High Spl Capability.. High-Power Passive Crossover Network.. Overload Protection. 80 Hz – 20 Khz Frequency Response.. 200 Watt 70V/100V Multi-Tap (Built-In Transformer) Or Direct 8O Low-Impedance.. Specifications: Frequency Range (-10Db): 80 Hz – 20 Khz. Frequency Response (±3 Db): 100 Hz – 20 Khz.

Features

  • Package Includes: (4) JBI AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker. Features: Highly weather-resistant IP56 rating. Consistent 120 x 120 broadband pattern control. Components: 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.. 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.. Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.. 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.. High-power passive crossover network.. Overload protection. 80 Hz 20 kHz frequency response.. 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8O low-impedance.. Specifications: Frequency Range (-10dB): 80 Hz 20 kHz. Frequency Response ( 3 dB): 100 Hz 20 kHz
  • Coverage Pattern: 120 x 120 . Directivity Factor (Q): 8.1 (1 k 16 kHz). Directivity Index (DI): 8.4 dB (1 k 16 kHz). System Power Rating: 250 W 2 hrs. 200 W 100 hrs. Sensitivity (2.83V @ 1m): 94 dB (Ave. 100 Hz 20 kHz). Maximum SPL (1m): Direct 8O: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB. Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance: 8 ohms. Transformer Taps: 70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
  • LF Driver: Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.. HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.. HF Driver Protection: Minimum audibility SonicGuard HF overload protection. Enclosure: ABS with Glass enclosure, heavily braced. Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
  • Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 16.00 x 17.00 x 16.00 Inches

Amazon Price: $1,800.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #3

Audiosavings Bundle: (8) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker

Asin: B0CTTWGBSL   |   Model: (8) JBL-COL800-BK   |   PartNumber: (8) JBL-COL800-BK

Plus 8 Ohm Direct Input, 116 Db Peak Spl (110 Db Continuous), 2 Hrs, Dual Tweeters Near Top Of Column For Unobstructed Coverage Of Listening Space, Versatile Mounting Brackets Included -- Both Close-To-Wall L-Brackets And Low-Profile Swivel(Pan)/Tilt Wall Bracket. Common Applications: The Jbi Col800 Slim Column Loudspeaker Is Ideal For A Wide Variety Of Applications, Such As Conference/Meeting Rooms, Lecture Halls, Retail Stores, Concourses, Compact Design And High Performance Is Desired..
Transformer Insertion Loss: Less Than 1 Db For All Taps. Maximum Input Voltage: 33 V Rms (2 Hrs), 66 V Peak. Recommended Protective High-Pass: 75 Hz For 8 Ω Operation; 60 Hz For All Transformer Tap Settings (60W, 30W, 15W And 7.5W). Drivers: Four 125 X 55 Mm (5 X 2.25 In.) Racetrack Lf Drivers. Two 20 Mm (0.8 In.) Tweeters (Tweeters Located At Top Of Array For Better Coverage Of Listening Space). Enclosure Material: Pc + Abs, Ul94-V0 Flammability Rating.
Coverage Pattern: Vertical 60° [1 Khz-4 Khz Average]; 10° Down-Tilt To Vertical Aiming Axis For +20°/-40° Coverage In Relation To Physical Cabinet Aim. Horizontal 160° [1 Khz – 4 Khz Average]. Directivity (Q): 8.1. Directivity Index (Di): 9.1 Db. Rated Maximum Spl: 110 Db Continuous (116 Db Peak) @ 1M. Nominal Impedance: 8Ω (In Thru/Direct Mode). Minimum Impedance: 7.7 Ω@ 290 Hz. Transformer Taps: 60W, 30W, 15W @ Both 70V & 100V (Plus 7.5W @ 70V), And 8Ω Thru, Selectable Via Switch..
Features Of Jbi-Col800-Bk: Four 5-Inch X 2.25-Inch (125 X 55 Mm) Racetrack Woofers & Two 0.8-Inch (20 Mm) Tweeters, 32 Inches Tall With Shallow 3.7-Inch (93 Mm) Cabinet Depth, Wide 160° Horizontal And Focused 60° Vertical Coverage 10° Downward Tilt To Dispersion Aim For Covering Most Listening Areas Without Requiring Physical Down-Tilting Of The Cabinet, 150W Continuous Pink Noise Power Handling (600W Peak), 85 Hz – 20 Khz Frequency Range. Built-In 60W 70V/100V Multi-Tap Transformer..

Features

  • Package Includes: (8) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker
  • Features of JBI-COL800-BK: Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters, 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth, Wide 160 horizontal and focused 60 vertical coverage 10 downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet, 150W continuous pink noise power handling (600W peak), 85 Hz 20 kHz frequency range. Built-in 60W 70V/100V multi-tap transformer.
  • plus 8 ohm direct input, 116 dB peak SPL (110 dB continuous), 2 hrs, Dual tweeters near top of column for unobstructed coverage of listening space, Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracket. Common Applications: The JBI COL800 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, compact design and high performance is desired.
  • Coverage Pattern: Vertical 60 [1 kHz-4 kHz average]; 10 down-tilt to vertical aiming axis for +20 /-40 coverage in relation to physical cabinet aim. Horizontal 160 [1 kHz 4 kHz average]. Directivity (Q): 8.1. Directivity Index (DI): 9.1 dB. Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m. Nominal Impedance: 8 (in Thru/direct mode). Minimum Impedance: 7.7 @ 290 Hz. Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8 thru, selectable via switch.
  • Transformer Insertion Loss: Less than 1 dB for all taps. Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak. Recommended Protective High-Pass: 75 Hz for 8 operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W). Drivers: Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers. Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space). Enclosure Material: PC + ABS, UL94-V0 flammability rating
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 3.70 x 31.50 x 4.10 Inches

Warranty: 5 Year, Manufacturer

Amazon Price: $4,000.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #4

Audiosavings Bundle: (1) JBI CSA 280Z 2 x 80w Commercial 70v Amplifier Amp 4 Restaurant CSA280Z Bundle with (2) 2 Rockville WET-6525B 6.5" 70V Commercial Indoor/Outdoor Wall Speakers (Items 3)

Asin: B0CQZ5J1P4   |   Model: CSA280Z+(2) WET-6525B   |   PartNumber: CSA280Z+(2) WET-6525B

Ipx55 Rating Makes This Perfect For Outdoor Use Or Indoor Use. Ipx55 Means This Can Withstand Jet Streams Spraying It From Any Angle Without Any Damage. Rugged Waterproof Speaker Enclosure. Aluminum Grill Is Waterproof And Rustproof. Weather Resistant. Powder Coated Steel Mounting Brackets That Pass A 96 Hour Saltwater Spray Test. 6.5" Woofer With Polypropylene Cone. 20Mm Pei Dome Tweeter Is Very Efficient And Has Great Sound Quality . Vented Enclosure Gives A More Clear Bass Response.
30W. 15W. 7.5W. 3.75W. 8 Ohm Power Handling: 40W.
Frequency Response: 55Hz - 20Khz. Sensitivity: 85Db +-2Db. Rms Power: 40W (When Using 8 Ohm). Nominal Impedance: 8 Ohm. Waterproof Spring Loaded Terminals. Built In Transformer Supports 70V Installations. Built In Tap Switch To Easily Select Your 70V Power. Color: Black. Weight: 6.94 Lbs(3.15 Kg) Each. Cabinet Dimensions: 12.21*7.4*7.3Inch (310*188*186Mm). There Is A Tap Switch On The Speaker So You Can Easily Select How Many Watts You Want The Speaker To Get From The Amp..
Universal Power Supply. Energy Star Certified. Power Output: 80W. Output Channels: 2. Input Sensitivity: 1.4Vrms For 8-Ohms. Phantom Power: 27Vdc. Ac Line Voltage: 100 - 240V, 50/60 Hz. Input Impedance: 20K Ohms/50K Ohms. Dimensions: 1.75” X 8.5” X 12” (44.45Mm X 215.9Mm X 304.8Mm). Included Accessories: Rack Mounting Kit. Features: Pair Rockville Wet-6525B 6.5" 70V Ipx55 Commercial Indoor/Outdoor Wall Speakers. 4-Way Swivel Bracket Allows Angle Adjustments Up, Down, Left, And Right.

Features

  • Package Includes: (1) JBI CSA 280Z 2 x 80w Commercial 70v Amplifier Amp 4 Restaurant/Bar/Cafe CSA280Z. (2) 2 Rockville WET-6525B 6.5" 70V Commercial Indoor/Outdoor Wall Speakers in Black. 2 output channels with 80W per channel. Built-in 70V and 100V. Fanless, space-saving 1U design. Sleep mode disable function. Energy-efficient amplifier. Sleek industrial look with illuminated rings making knobs easy to see and use. Supports JBI CSR-V wall controller via CAT5 cable with RJ45 connectors
  • Universal power supply. Energy Star Certified. Power Output: 80W. Output Channels: 2. Input Sensitivity: 1.4Vrms for 8-ohms. Phantom Power: 27VDC. AC Line Voltage: 100 - 240V, 50/60 Hz. Input Impedance: 20K ohms/50K ohms. Dimensions: 1.75 x 8.5 x 12 (44.45mm x 215.9mm x 304.8mm). Included Accessories: Rack mounting kit. Features: Pair Rockville WET-6525B 6.5 70V IPX55 Commercial Indoor/Outdoor Wall Speakers. 4-Way swivel bracket allows angle adjustments up, down, left, and right
  • IPX55 rating makes this perfect for outdoor use or indoor use. IPX55 means this can withstand jet streams spraying it from any angle without any damage. Rugged waterproof speaker enclosure. Aluminum grill is waterproof and rustproof. Weather resistant. Powder coated steel mounting brackets that pass a 96 hour saltwater spray test. 6.5 Woofer with Polypropylene cone. 20mm PEI dome tweeter is very efficient and has great sound quality . Vented enclosure gives a more clear bass response
  • Frequency Response: 55Hz - 20Khz. Sensitivity: 85dB +-2dB. RMS Power: 40w (when using 8 ohm). Nominal impedance: 8 Ohm. Waterproof spring loaded terminals. Built in transformer supports 70V installations. Built in tap switch to easily select your 70V power. Color: Black. Weight: 6.94 LBS(3.15 Kg) each. Cabinet dimensions: 12.21*7.4*7.3inch (310*188*186mm). There is a tap switch on the speaker so you can easily select how many watts you want the speaker to get from the amp.
  • 30w. 15w. 7.5w. 3.75w. 8 Ohm power handling: 40w
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBI

Dimensions: 5.00 x 12.00 x 16.50 inches

Amazon Price: $644.85 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #5

Audiosavings Bundle: (1) JBI CSA 280Z 2 x 80w Commercial 70v Amplifier Amp 4 Restaurant CSA280Z Bundle with (4) 2 Rockville WET-40B 4" 70V Commercial Indoor/Outdoor Wall Speakers Swivel (Items 5)

Asin: B0CQZ4W9NF   |   Model: CSA280Z+(4) WET-40B   |   PartNumber: CSA280Z+(4) WET-40B

70 Volt Systems Are The Number One Choice For Applications Where You Want To Install Many Speakers. With 70 Volt There Are A Lot Of Advantages Over 8-Ohm Systems. One Of The Main Advantages Is The Simplicity Of The Wiring As Well As How Easy It Is To Match Up Speakers With The Amplifier. For Example, You Can Buy One 70V Amplifier With 350 Watts And You Can Install Speakers That Total Close To 300 Watts..
For Example, These Speakers Have Selectable Options Of 2.5W, 5W, 10W, 20W. What This Does Is Limit How Many Watts The Built-In Transformer On The Speaker Will Allow The Speaker To Get From The Amplifier. This Gives You Full Customization Over The Sound For Your Space. In A Restaurant For Example You Can Tap Your Dining Room Speakers At 5 Watts, The Speakers By The Bar Area At 20 Watts, And The Ones In The Hallway At 2.5 Watts..
It Does Not Matter If It Is 15 Speakers That Are 20 Watts Each Or 50 Speakers That Are Tapped At 5 Watts Each. You Always Want Your 70 Volt Amp To Have At Least 15 Or 20% More Power Than The Combined Watts Your Speakers Are Tapped At. When We Say The Word Tap, What We Are Referring To Are The Selectors These Speakers Have On Them..
Universal Power Supply. Energy Star Certified. Power Output: 80W. Output Channels: 2. Input Sensitivity: 1.4Vrms For 8-Ohms. Phantom Power: 27Vdc. Ac Line Voltage: 100 - 240V, 50/60 Hz. Input Impedance: 20K Ohms/50K Ohms. Dimensions: 1.75” X 8.5” X 12” (44.45Mm X 215.9Mm X 304.8Mm). Included Accessories: Rack Mounting Kit.

Features

  • Package Includes: (1) JBI CSA 280Z 2 x 80w Commercial 70v Amplifier Amp 4 Restaurant/Bar/Cafe CSA280Z. (4) 2 Rockville WET-40B 4" 70V Commercial Indoor/Outdoor Wall Speakers Black Swivel. 2 output channels with 80W per channel. Built-in 70V and 100V. Fanless, space-saving 1U design. Sleep mode disable function. Energy-efficient amplifier. Sleek industrial look with illuminated rings making knobs easy to see and use. Supports JBI CSR-V wall controller via CAT5 cable with RJ45 connectors
  • Universal power supply. Energy Star Certified. Power Output: 80W. Output Channels: 2. Input Sensitivity: 1.4Vrms for 8-ohms. Phantom Power: 27VDC. AC Line Voltage: 100 - 240V, 50/60 Hz. Input Impedance: 20K ohms/50K ohms. Dimensions: 1.75 x 8.5 x 12 (44.45mm x 215.9mm x 304.8mm). Included Accessories: Rack mounting kit
  • 70 volt systems are the number one choice for applications where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 350 watts and you can install speakers that total close to 300 watts.
  • It does not matter if it is 15 speakers that are 20 watts each or 50 speakers that are tapped at 5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the selectors these speakers have on them.
  • For example, these speakers have selectable options of 2.5w, 5w, 10w, 20w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 20 watts, and the ones in the hallway at 2.5 watts.
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBI

Dimensions: 5.00 x 12.00 x 16.50 inches

Amazon Price: $714.75 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #6

Audiosavings Bundle: (2) JBI COL800-WH 32" White 70V Commercial Slim Column Wall Mount Array Speaker

Asin: B0CLG2LYKJ   |   Model: (2) JBL-COL800-WH   |   PartNumber: (2) JBL-COL800-WH

300W Continuous Program (2 Hrs). 150W (600W Peak) Continuous Pink Noise (2 Hrs). 100W (400W Peak) Continuous Pink Noise (100 Hrs). Sensitivity (2.83V @ 1M): 88 Db. Vertical 60° [1 Khz-4 Khz Average]; 10° Down-Tilt To Vertical Aiming Axis For +20°/-40° Coverage In Relation To Physical Cabinet Aim. Horizontal 160° [1 Khz – 4 Khz Average]. Directivity (Q): 8.1. Directivity Index (Di): 9.1 Db. Rated Maximum Spl: 110 Db Continuous (116 Db Peak) @ 1M. Nominal Impedance: 8Ω (In Thru/Direct Mode).
Two 20 Mm (0.8 In.) Tweeters (Tweeters Located At Top Of Array For Better Coverage Of Listening Space). Enclosure Material: Pc + Abs, Ul94-V0 Flammability Rating. Grille: Plated Spcc With Polyester Powder Coat Finish. Agency Ratings: Transformer Ul Recognized. Rohs, Reach Compliance. Lvd For Ce.
Minimum Impedance: 7.7 Ω@ 290 Hz. Transformer Taps: 60W, 30W, 15W @ Both 70V & 100V (Plus 7.5W @ 70V), And 8Ω Thru, Selectable Via Switch. Transformer Insertion Loss: Less Than 1 Db For All Taps. Maximum Input Voltage: 33 V Rms (2 Hrs), 66 V Peak. Recommended Protective High-Pass: 75 Hz For 8 Ω Operation; 60 Hz For All Transformer Tap Settings (60W, 30W, 15W And 7.5W).. Four 125 X 55 Mm (5 X 2.25 In.) Racetrack Lf Drivers.
85 Hz – 20 Khz Frequency Range. Built-In 60W 70V/100V Multi-Tap Transformer, Plus 8 Ohm Direct Input. 116 Db Peak Spl (110 Db Continuous), 2 Hrs. Dual Tweeters Near Top Of Column For Unobstructed Coverage Of Listening Space. Versatile Mounting Brackets Included -- Both Close-To-Wall L-Brackets And Low-Profile Swivel(Pan)/Tilt Wall Bracket. Color: White. Frequency Range (-10 Db)¹: 85 Hz – 20 Khz. Frequency Response (+/-3 Db): 125 Hz – 18 Khz. Power Rating (8Ω Setting)2 :.

Features

  • Package Includes: (2) JBI COL800-WH 32" White 70V Commercial Slim Column Wall Mount Array Speaker. Features: Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters. 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth. Wide 160 horizontal and focused 60 vertical coverage. 10 downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet. 150W continuous pink noise power handling (600W peak)
  • 85 Hz 20 kHz frequency range. Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input. 116 dB peak SPL (110 dB continuous), 2 hrs. Dual tweeters near top of column for unobstructed coverage of listening space. Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracket. Color: White. Frequency Range (-10 dB) : 85 Hz 20 kHz. Frequency Response (+/-3 dB): 125 Hz 18 kHz. Power Rating (8 setting)2 :
  • 300W Continuous Program (2 hrs). 150W (600W peak) Continuous Pink Noise (2 hrs). 100W (400W peak) Continuous Pink Noise (100 hrs). Sensitivity (2.83V @ 1m): 88 dB. Vertical 60 [1 kHz-4 kHz average]; 10 down-tilt to vertical aiming axis for +20 /-40 coverage in relation to physical cabinet aim. Horizontal 160 [1 kHz 4 kHz average]. Directivity (Q): 8.1. Directivity Index (DI): 9.1 dB. Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m. Nominal Impedance: 8 (in Thru/direct mode)
  • Minimum Impedance: 7.7 @ 290 Hz. Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8 thru, selectable via switch. Transformer Insertion Loss: Less than 1 dB for all taps. Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak. Recommended Protective High-Pass: 75 Hz for 8 operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W).. Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers
  • Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space). Enclosure Material: PC + ABS, UL94-V0 flammability rating. Grille: Plated SPCC with polyester powder coat finish. Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 4.00 x 32.00 x 4.00 inches

Amazon Price: $1,000.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #7

Audiosavings Bundle: (6) JBI AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker

Asin: B0CLFTX94G   |   Model: (6) AWC82   |   PartNumber: (6) AWC82

Coverage Pattern: 120° X 120°. Directivity Factor (Q): 8.1 (1 K – 16 Khz). Directivity Index (Di): 8.4 Db (1 K – 16 Khz). System Power Rating: 250 W 2 Hrs. 200 W 100 Hrs. Sensitivity (2.83V @ 1M): 94 Db (Ave. 100 Hz – 20 Khz). Maximum Spl (1M): Direct 8O: 118 Db (Peaks Of 124 Db) 200 W Tap: 117 Db. Crossover Network: 1.8 Khz, 3Rd Order (18 Db/Oct) High-Pass Plus Conjugate To Hf, 2Nd Order Low-Pass To Lf. Nominal Impedance: 8 Ohms. Transformer Taps: 70V: 200W, 100W, 50W, 25W100v: 200W, 100W, 50W.
Grille: Corrosion-Resistant Zinc-Rich Extra-Thick Powder Coated Steel Grille, 3-Layer Assembly With Foam And Woven Poly Mesh Backing..
Lf Driver: Kevlar-Reinforced Cone With Weather Treatment, 50 Mm (2 In) Voice Coil.. Hf Driver: 25 Mm (1 In) Diaphragm And Voice Coil Diameter, High Temperature Polymer Diaphragm, Patented Design, Fluid-Cooling.. Hf Driver Protection: Minimum Audibility Sonicguard Hf Overload Protection. Enclosure: Abs With Glass Enclosure, Heavily Braced. Attachment: Two M10 (Fine-Thread) Points For Included U-Bracket. M6 Secondary Safety Attachment Point On Back Panel..
Advanced High-Slope Crossover Network For Constant Coverage And Smooth, Natural Midrange.. 250 Watt Power Handling (Average Continuous Pink Noise) With High Sensitivity Provides High Spl Capability.. High-Power Passive Crossover Network.. Overload Protection. 80 Hz – 20 Khz Frequency Response.. 200 Watt 70V/100V Multi-Tap (Built-In Transformer) Or Direct 8O Low-Impedance.. Specifications: Frequency Range (-10Db): 80 Hz – 20 Khz. Frequency Response (±3 Db): 100 Hz – 20 Khz.

Features

  • Package Includes: (6) JBI AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker. Features: Highly weather-resistant IP56 rating. Consistent 120 x 120 broadband pattern control. Components: 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.. 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.. Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.. 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.. High-power passive crossover network.. Overload protection. 80 Hz 20 kHz frequency response.. 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8O low-impedance.. Specifications: Frequency Range (-10dB): 80 Hz 20 kHz. Frequency Response ( 3 dB): 100 Hz 20 kHz
  • Coverage Pattern: 120 x 120 . Directivity Factor (Q): 8.1 (1 k 16 kHz). Directivity Index (DI): 8.4 dB (1 k 16 kHz). System Power Rating: 250 W 2 hrs. 200 W 100 hrs. Sensitivity (2.83V @ 1m): 94 dB (Ave. 100 Hz 20 kHz). Maximum SPL (1m): Direct 8O: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB. Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance: 8 ohms. Transformer Taps: 70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
  • LF Driver: Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.. HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.. HF Driver Protection: Minimum audibility SonicGuard HF overload protection. Enclosure: ABS with Glass enclosure, heavily braced. Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
  • Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 16.00 x 17.00 x 16.00 inches

Amazon Price: $2,700.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #8

Audiosavings Bundle: (4) JBI COL800-WH 32" White 70V Commercial Slim Column Wall Mount Array Speaker

Asin: B0CLFTJJM2   |   Model: (4) JBL-COL800-WH   |   PartNumber: (4) JBL-COL800-WH

300W Continuous Program (2 Hrs). 150W (600W Peak) Continuous Pink Noise (2 Hrs). 100W (400W Peak) Continuous Pink Noise (100 Hrs). Sensitivity (2.83V @ 1M): 88 Db. Vertical 60° [1 Khz-4 Khz Average]; 10° Down-Tilt To Vertical Aiming Axis For +20°/-40° Coverage In Relation To Physical Cabinet Aim. Horizontal 160° [1 Khz – 4 Khz Average]. Directivity (Q): 8.1. Directivity Index (Di): 9.1 Db. Rated Maximum Spl: 110 Db Continuous (116 Db Peak) @ 1M. Nominal Impedance: 8Ω (In Thru/Direct Mode).
Two 20 Mm (0.8 In.) Tweeters (Tweeters Located At Top Of Array For Better Coverage Of Listening Space). Enclosure Material: Pc + Abs, Ul94-V0 Flammability Rating. Grille: Plated Spcc With Polyester Powder Coat Finish. Agency Ratings: Transformer Ul Recognized. Rohs, Reach Compliance. Lvd For Ce.
Minimum Impedance: 7.7 Ω@ 290 Hz. Transformer Taps: 60W, 30W, 15W @ Both 70V & 100V (Plus 7.5W @ 70V), And 8Ω Thru, Selectable Via Switch. Transformer Insertion Loss: Less Than 1 Db For All Taps. Maximum Input Voltage: 33 V Rms (2 Hrs), 66 V Peak. Recommended Protective High-Pass: 75 Hz For 8 Ω Operation; 60 Hz For All Transformer Tap Settings (60W, 30W, 15W And 7.5W).. Four 125 X 55 Mm (5 X 2.25 In.) Racetrack Lf Drivers.
85 Hz – 20 Khz Frequency Range. Built-In 60W 70V/100V Multi-Tap Transformer, Plus 8 Ohm Direct Input. 116 Db Peak Spl (110 Db Continuous), 2 Hrs. Dual Tweeters Near Top Of Column For Unobstructed Coverage Of Listening Space. Versatile Mounting Brackets Included -- Both Close-To-Wall L-Brackets And Low-Profile Swivel(Pan)/Tilt Wall Bracket. Color: White. Frequency Range (-10 Db)¹: 85 Hz – 20 Khz. Frequency Response (+/-3 Db): 125 Hz – 18 Khz. Power Rating (8Ω Setting)2 :.

Features

  • Package Includes: (4) JBI COL800-WH 32" White 70V Commercial Slim Column Wall Mount Array Speaker. Features: Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters. 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth. Wide 160 horizontal and focused 60 vertical coverage. 10 downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet. 150W continuous pink noise power handling (600W peak)
  • 85 Hz 20 kHz frequency range. Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input. 116 dB peak SPL (110 dB continuous), 2 hrs. Dual tweeters near top of column for unobstructed coverage of listening space. Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracket. Color: White. Frequency Range (-10 dB) : 85 Hz 20 kHz. Frequency Response (+/-3 dB): 125 Hz 18 kHz. Power Rating (8 setting)2 :
  • 300W Continuous Program (2 hrs). 150W (600W peak) Continuous Pink Noise (2 hrs). 100W (400W peak) Continuous Pink Noise (100 hrs). Sensitivity (2.83V @ 1m): 88 dB. Vertical 60 [1 kHz-4 kHz average]; 10 down-tilt to vertical aiming axis for +20 /-40 coverage in relation to physical cabinet aim. Horizontal 160 [1 kHz 4 kHz average]. Directivity (Q): 8.1. Directivity Index (DI): 9.1 dB. Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m. Nominal Impedance: 8 (in Thru/direct mode)
  • Minimum Impedance: 7.7 @ 290 Hz. Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8 thru, selectable via switch. Transformer Insertion Loss: Less than 1 dB for all taps. Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak. Recommended Protective High-Pass: 75 Hz for 8 operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W).. Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers
  • Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space). Enclosure Material: PC + ABS, UL94-V0 flammability rating. Grille: Plated SPCC with polyester powder coat finish. Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 4.00 x 32.00 x 4.00 inches

Amazon Price: $1,800.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #9

Audiosavings Bundle: (8) JBI AWC129-BK 12" Black 2-Way Indoor/Outdoor Surface Mount Commercial Speaker

Asin: B0CLFT577N   |   Model: (8) AWC129-BK   |   PartNumber: (8) AWC129-BK

Coverage Pattern: 90° X 90°. Directivity Factor (Q): 10.1 (1 K – 16 Khz). Directivity Index (Di): 9.5 Db (1K – 16 Khz). System Power Rating: 400 W (1600 W Peak), 2 Hrs. 250 W (1000 W Peak), 100 Hrs. Sensitivity (2.83V @ 1M): 96 Db (Ave. 80 Hz – 20 Khz). Maximum Spl (1M): Direct 8O: 122 Db (Peaks Of 128 Db) 200 W Tap: 119 Db. Crossover Network: 1.5 Khz, 3Rd Order (18 Db/Oct) High-Pass Plus Conjugate To Hf, 2Nd Order Low-Pass To Lf. Nominal Impedance: 8 Ohms.
Attachment: Two M10 (Fine-Thread) Points For Included U-Bracket. M6 Secondary Safety Attachment Point On Back Panel.. Grille: Corrosion-Resistant Zinc-Rich Extra-Thick Powder Coated Steel Grille, 3- Layer Assembly With Foam And Woven Poly Mesh Backing..
Transformer Taps: 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W. Lf Driver: Kevlar-Reinforced Cone With Weather Treatment, 75 Mm (3 In) Voice Coil.. Hf Driver: 25 Mm (1 In) Diaphragm And Voice Coil Diameter, High Temperature Polymer Diaphragm, Patented Design, Fluid-Cooling.. Hf Driver Protection: Minimum Audibility Sonicguard Hf Overload Protection. Enclosure: Abs With Glass Enclosure, Heavily Braced.
Advanced High-Slope Crossover Network For Constant Coverage And Smooth, Natural Midrange.. 400 Watt Power Handling (Average Continuous Pink Noise) With High Sensitivity Provides High Spl Capability.. High-Power Passive Crossover Network.. Overload Protection. 55 Hz – 20 Khz Frequency Response.. 200 Watt 70V/100V Multi-Tap (Built-In Transformer) Direct 8O Low-Impedance.. Specifications: Frequency Range (-10Db): 55 Hz – 20 Khz. Frequency Response (±3 Db): 80 Hz – 20 Khz.

Features

  • Package Includes: (8) JBI AWC129-BK 12" Black 2-Way Indoor/Outdoor Surface Mount Commercial Speaker. Features: Highly weather-resistant IP56 rating. Consistent 90 x 90 broadband pattern control. Components: 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil.. 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.. Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.. 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.. High-power passive crossover network.. Overload protection. 55 Hz 20 kHz frequency response.. 200 Watt 70V/100V multi-tap (built-in transformer) direct 8O low-impedance.. Specifications: Frequency Range (-10dB): 55 Hz 20 kHz. Frequency Response ( 3 dB): 80 Hz 20 kHz
  • Coverage Pattern: 90 x 90 . Directivity Factor (Q): 10.1 (1 k 16 kHz). Directivity Index (DI): 9.5 dB (1k 16 kHz). System Power Rating: 400 W (1600 W peak), 2 hrs. 250 W (1000 W peak), 100 hrs. Sensitivity (2.83V @ 1m): 96 dB (Ave. 80 Hz 20 kHz). Maximum SPL (1m): Direct 8O: 122 dB (peaks of 128 dB) 200 W Tap: 119 dB. Crossover Network: 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance: 8 ohms
  • Transformer Taps: 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W. LF Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.. HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.. HF Driver Protection: Minimum audibility SonicGuard HF overload protection. Enclosure: ABS with Glass enclosure, heavily braced
  • Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.. Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing.
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 23.00 x 21.00 x 21.00 inches

Amazon Price: $6,746.40 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #10

Audiosavings Bundle: (2) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker

Asin: B0CLFS81TM   |   Model: (2) JBL-COL800-BK   |   PartNumber: (2) JBL-COL800-BK

300W Continuous Program (2 Hrs). 150W (600W Peak) Continuous Pink Noise (2 Hrs). 100W (400W Peak) Continuous Pink Noise (100 Hrs). Sensitivity (2.83V @ 1M): 88 Db. Vertical 60° [1 Khz-4 Khz Average]; 10° Down-Tilt To Vertical Aiming Axis For +20°/-40° Coverage In Relation To Physical Cabinet Aim. Horizontal 160° [1 Khz – 4 Khz Average]. Directivity (Q): 8.1. Directivity Index (Di): 9.1 Db. Rated Maximum Spl: 110 Db Continuous (116 Db Peak) @ 1M. Nominal Impedance: 8Ω (In Thru/Direct Mode).
Two 20 Mm (0.8 In.) Tweeters (Tweeters Located At Top Of Array For Better Coverage Of Listening Space). Enclosure Material: Pc + Abs, Ul94-V0 Flammability Rating. Grille: Plated Spcc With Polyester Powder Coat Finish. Agency Ratings: Transformer Ul Recognized. Rohs, Reach Compliance. Lvd For Ce.
Minimum Impedance: 7.7 Ω@ 290 Hz. Transformer Taps: 60W, 30W, 15W @ Both 70V & 100V (Plus 7.5W @ 70V), And 8Ω Thru, Selectable Via Switch. Transformer Insertion Loss: Less Than 1 Db For All Taps. Maximum Input Voltage: 33 V Rms (2 Hrs), 66 V Peak. Recommended Protective High-Pass: 75 Hz For 8 Ω Operation; 60 Hz For All Transformer Tap Settings (60W, 30W, 15W And 7.5W).. Four 125 X 55 Mm (5 X 2.25 In.) Racetrack Lf Drivers.
85 Hz – 20 Khz Frequency Range. Built-In 60W 70V/100V Multi-Tap Transformer, Plus 8 Ohm Direct Input. 116 Db Peak Spl (110 Db Continuous), 2 Hrs. Dual Tweeters Near Top Of Column For Unobstructed Coverage Of Listening Space. Versatile Mounting Brackets Included -- Both Close-To-Wall L-Brackets And Low-Profile Swivel(Pan)/Tilt Wall Bracket. Color: Black. Frequency Range (-10 Db)¹: 85 Hz – 20 Khz. Frequency Response (+/-3 Db): 125 Hz – 18 Khz. Power Rating (8Ω Setting)2 :.

Features

  • Package Includes: (2) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker. Features: Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters. 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth. Wide 160 horizontal and focused 60 vertical coverage. 10 downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet. 150W continuous pink noise power handling (600W peak)
  • 85 Hz 20 kHz frequency range. Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input. 116 dB peak SPL (110 dB continuous), 2 hrs. Dual tweeters near top of column for unobstructed coverage of listening space. Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracket. Color: Black. Frequency Range (-10 dB) : 85 Hz 20 kHz. Frequency Response (+/-3 dB): 125 Hz 18 kHz. Power Rating (8 setting)2 :
  • 300W Continuous Program (2 hrs). 150W (600W peak) Continuous Pink Noise (2 hrs). 100W (400W peak) Continuous Pink Noise (100 hrs). Sensitivity (2.83V @ 1m): 88 dB. Vertical 60 [1 kHz-4 kHz average]; 10 down-tilt to vertical aiming axis for +20 /-40 coverage in relation to physical cabinet aim. Horizontal 160 [1 kHz 4 kHz average]. Directivity (Q): 8.1. Directivity Index (DI): 9.1 dB. Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m. Nominal Impedance: 8 (in Thru/direct mode)
  • Minimum Impedance: 7.7 @ 290 Hz. Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8 thru, selectable via switch. Transformer Insertion Loss: Less than 1 dB for all taps. Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak. Recommended Protective High-Pass: 75 Hz for 8 operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W).. Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers
  • Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space). Enclosure Material: PC + ABS, UL94-V0 flammability rating. Grille: Plated SPCC with polyester powder coat finish. Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 4.00 x 32.00 x 4.00 inches

Amazon Price: $1,000.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #11

Audiosavings Bundle: (5) Pair JBI Control 126 WT 6.5" 30w Commercial 70v in-Wall Speakers for Restaurant/Bar

Asin: B0CLFR8NJJ   |   Model: (5) CONTROL 126WT   |   PartNumber: (5) CONTROL 126WT

Drivers: Lf: 165 Mm (6.5 In) Polymer-Coated Aluminum Cone., Hf: 25 Mm (1 In) Pure-Titanium Dome With Cloth Suspension On Low-Diffraction Swivel-Mount With -10 Degree Aimability.. Input Connectors: Screw-Down Euroblock-Type Connector. Max Wire Size 14 Awg (1.5 Mm)2. Crossover Network: 3Rd Order (18 Db/Oct) Low Pass To The Woofer And 3Rd Order (18 Db/Oct) High Pass To The Tweeter..
Included Accessories: Cutout Template & Paint Shield. Optional Accessories: Wb6 Rough-In Frame For Newconstruction Installation To Wallstuds.
Optimum Air Cavity Behind Speaker: 20 To 40 Liters (0.7 To 1.4 Cu Ft). Outside Dimensions (H X W X D): 280 X 215 X 105 Mm (11 X 8.5 X 4.1 In), 99 Mm (3.8 In) Front Of Wall To Back Of Speaker.. Maximum Wall Thickness: 2 Mm (1.25 In). Cutout Size (H X W): 246 X 181 Mm (9.7 X 7.2 In),. Net Weight (Each): 2.7 Kg (5.9 Lb). Shipping Weight (Ea): 6.2 Kg (13.5 Lb).
50W Continuous (100W Program, 200W Peak) Power Handling (126W).. Specifications: Frequency Range: 38 Hz - 20 Khz (-10 Db). Power Rating: 200 W Peak 100 W Continuous Program Power50 W Continuous Pink Noise. Transformer Taps: 70 V: 30 W, 15 W, 7.5 W & 3.7 W Taps. Sensitivity: 88 Db Spl. Coverage: 180°H X 160°V (Ave. 1 Khz - 8 Khz). Impedance: 8 Ohms.

Features

  • Package Includes: (5) 2 JBI Control 126 WT 6.5" 30w Commercial 70v In-Wall Speakers For Restaurant/Bar. Features: Components: 165 mm (6.5 in) polymer-coated aluminum-cone woofer with pure butyl rubber surround.. 25 mm (1 in) pure-titanium dome low diffraction swivel aimable titanium tweeter.. High-slope crossover for natural midrange sound.. Extended bandwidth performance of 38 Hz - 20 kHz.
  • 50W continuous (100W program, 200W peak) power handling (126W).. Specifications: Frequency Range: 38 Hz - 20 kHz (-10 dB). Power Rating: 200 W Peak 100 W Continuous Program Power50 W Continuous Pink Noise. Transformer Taps: 70 V: 30 W, 15 W, 7.5 W & 3.7 W taps. Sensitivity: 88 dB SPL. Coverage: 180 H x 160 V (ave. 1 kHz - 8 kHz). Impedance: 8 ohms
  • Drivers: LF: 165 mm (6.5 in) polymer-coated aluminum cone., HF: 25 mm (1 in) pure-titanium dome with cloth suspension on low-diffraction swivel-mount with -10 degree aimability.. Input Connectors: Screw-down Euroblock-type connector. Max wire size 14 AWG (1.5 mm)2. Crossover Network: 3rd order (18 dB/oct) Low Pass to the woofer and 3rd order (18 dB/oct) High Pass to the tweeter.
  • Optimum Air Cavity Behind Speaker: 20 to 40 liters (0.7 to 1.4 cu ft). Outside Dimensions (H x W x D): 280 x 215 x 105 mm (11 x 8.5 x 4.1 in), 99 mm (3.8 in) front of wall to back of speaker.. Maximum Wall Thickness: 2 mm (1.25 in). Cutout Size (H x W): 246 x 181 mm (9.7 x 7.2 in),. Net Weight (each): 2.7 kg (5.9 lb). Shipping Weight (ea): 6.2 kg (13.5 lb)
  • Included Accessories: Cutout template & paint shield. Optional Accessories: WB6 Rough-In Frame for newconstruction installation to wallstuds
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 9.00 x 12.00 x 10.00 inches

Amazon Price: $1,998.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #12

Audiosavings Bundle: (8) JBI AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker

Asin: B0CLFQZLGP   |   Model: (8) AWC82   |   PartNumber: (8) AWC82

Coverage Pattern: 120° X 120°. Directivity Factor (Q): 8.1 (1 K – 16 Khz). Directivity Index (Di): 8.4 Db (1 K – 16 Khz). System Power Rating: 250 W 2 Hrs. 200 W 100 Hrs. Sensitivity (2.83V @ 1M): 94 Db (Ave. 100 Hz – 20 Khz). Maximum Spl (1M): Direct 8O: 118 Db (Peaks Of 124 Db) 200 W Tap: 117 Db. Crossover Network: 1.8 Khz, 3Rd Order (18 Db/Oct) High-Pass Plus Conjugate To Hf, 2Nd Order Low-Pass To Lf. Nominal Impedance: 8 Ohms. Transformer Taps: 70V: 200W, 100W, 50W, 25W100v: 200W, 100W, 50W.
Grille: Corrosion-Resistant Zinc-Rich Extra-Thick Powder Coated Steel Grille, 3-Layer Assembly With Foam And Woven Poly Mesh Backing..
Lf Driver: Kevlar-Reinforced Cone With Weather Treatment, 50 Mm (2 In) Voice Coil.. Hf Driver: 25 Mm (1 In) Diaphragm And Voice Coil Diameter, High Temperature Polymer Diaphragm, Patented Design, Fluid-Cooling.. Hf Driver Protection: Minimum Audibility Sonicguard Hf Overload Protection. Enclosure: Abs With Glass Enclosure, Heavily Braced. Attachment: Two M10 (Fine-Thread) Points For Included U-Bracket. M6 Secondary Safety Attachment Point On Back Panel..
Advanced High-Slope Crossover Network For Constant Coverage And Smooth, Natural Midrange.. 250 Watt Power Handling (Average Continuous Pink Noise) With High Sensitivity Provides High Spl Capability.. High-Power Passive Crossover Network.. Overload Protection. 80 Hz – 20 Khz Frequency Response.. 200 Watt 70V/100V Multi-Tap (Built-In Transformer) Or Direct 8O Low-Impedance.. Specifications: Frequency Range (-10Db): 80 Hz – 20 Khz. Frequency Response (±3 Db): 100 Hz – 20 Khz.

Features

  • Package Includes: (8) JBI AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker. Features: Highly weather-resistant IP56 rating. Consistent 120 x 120 broadband pattern control. Components: 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.. 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.. Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.. 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.. High-power passive crossover network.. Overload protection. 80 Hz 20 kHz frequency response.. 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8O low-impedance.. Specifications: Frequency Range (-10dB): 80 Hz 20 kHz. Frequency Response ( 3 dB): 100 Hz 20 kHz
  • Coverage Pattern: 120 x 120 . Directivity Factor (Q): 8.1 (1 k 16 kHz). Directivity Index (DI): 8.4 dB (1 k 16 kHz). System Power Rating: 250 W 2 hrs. 200 W 100 hrs. Sensitivity (2.83V @ 1m): 94 dB (Ave. 100 Hz 20 kHz). Maximum SPL (1m): Direct 8O: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB. Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance: 8 ohms. Transformer Taps: 70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
  • LF Driver: Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.. HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.. HF Driver Protection: Minimum audibility SonicGuard HF overload protection. Enclosure: ABS with Glass enclosure, heavily braced. Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
  • Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 16.00 x 17.00 x 16.00 inches

Amazon Price: $3,431.56 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #13

Audiosavings Bundle: (4) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker

Asin: B0CLFNPN6H   |   Model: (4) JBL-COL800-BK   |   PartNumber: (4) JBL-COL800-BK

300W Continuous Program (2 Hrs). 150W (600W Peak) Continuous Pink Noise (2 Hrs). 100W (400W Peak) Continuous Pink Noise (100 Hrs). Sensitivity (2.83V @ 1M): 88 Db. Vertical 60° [1 Khz-4 Khz Average]; 10° Down-Tilt To Vertical Aiming Axis For +20°/-40° Coverage In Relation To Physical Cabinet Aim. Horizontal 160° [1 Khz – 4 Khz Average]. Directivity (Q): 8.1. Directivity Index (Di): 9.1 Db. Rated Maximum Spl: 110 Db Continuous (116 Db Peak) @ 1M. Nominal Impedance: 8Ω (In Thru/Direct Mode).
Two 20 Mm (0.8 In.) Tweeters (Tweeters Located At Top Of Array For Better Coverage Of Listening Space). Enclosure Material: Pc + Abs, Ul94-V0 Flammability Rating. Grille: Plated Spcc With Polyester Powder Coat Finish. Agency Ratings: Transformer Ul Recognized. Rohs, Reach Compliance. Lvd For Ce.
Minimum Impedance: 7.7 Ω@ 290 Hz. Transformer Taps: 60W, 30W, 15W @ Both 70V & 100V (Plus 7.5W @ 70V), And 8Ω Thru, Selectable Via Switch. Transformer Insertion Loss: Less Than 1 Db For All Taps. Maximum Input Voltage: 33 V Rms (2 Hrs), 66 V Peak. Recommended Protective High-Pass: 75 Hz For 8 Ω Operation; 60 Hz For All Transformer Tap Settings (60W, 30W, 15W And 7.5W).. Four 125 X 55 Mm (5 X 2.25 In.) Racetrack Lf Drivers.
85 Hz – 20 Khz Frequency Range. Built-In 60W 70V/100V Multi-Tap Transformer, Plus 8 Ohm Direct Input. 116 Db Peak Spl (110 Db Continuous), 2 Hrs. Dual Tweeters Near Top Of Column For Unobstructed Coverage Of Listening Space. Versatile Mounting Brackets Included -- Both Close-To-Wall L-Brackets And Low-Profile Swivel(Pan)/Tilt Wall Bracket. Color: Black. Frequency Range (-10 Db)¹: 85 Hz – 20 Khz. Frequency Response (+/-3 Db): 125 Hz – 18 Khz. Power Rating (8Ω Setting)2 :.

Features

  • Package Includes: (4) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker. Features: Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters. 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth. Wide 160 horizontal and focused 60 vertical coverage. 10 downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet. 150W continuous pink noise power handling (600W peak)
  • 85 Hz 20 kHz frequency range. Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input. 116 dB peak SPL (110 dB continuous), 2 hrs. Dual tweeters near top of column for unobstructed coverage of listening space. Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracket. Color: Black. Frequency Range (-10 dB) : 85 Hz 20 kHz. Frequency Response (+/-3 dB): 125 Hz 18 kHz. Power Rating (8 setting)2 :
  • 300W Continuous Program (2 hrs). 150W (600W peak) Continuous Pink Noise (2 hrs). 100W (400W peak) Continuous Pink Noise (100 hrs). Sensitivity (2.83V @ 1m): 88 dB. Vertical 60 [1 kHz-4 kHz average]; 10 down-tilt to vertical aiming axis for +20 /-40 coverage in relation to physical cabinet aim. Horizontal 160 [1 kHz 4 kHz average]. Directivity (Q): 8.1. Directivity Index (DI): 9.1 dB. Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m. Nominal Impedance: 8 (in Thru/direct mode)
  • Minimum Impedance: 7.7 @ 290 Hz. Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8 thru, selectable via switch. Transformer Insertion Loss: Less than 1 dB for all taps. Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak. Recommended Protective High-Pass: 75 Hz for 8 operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W).. Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers
  • Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space). Enclosure Material: PC + ABS, UL94-V0 flammability rating. Grille: Plated SPCC with polyester powder coat finish. Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 4.00 x 32.00 x 4.00 inches

Amazon Price: $2,000.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #14

Audiosavings Bundle: (2) Pair JBI Control 68HP High-Power 70v Commercial 8" Hanging Pendant Speakers

Asin: B0CLFNH97S   |   Model: (2) JBL-C68HP   |   PartNumber: (2) JBL-C68HP

Maximum Spl: 114 Db Continuous Pink Noise, 120 Db Peak. Coverage Angle: 110° Conical. Directivity Factor (Q): 7.8. Directivity Index (Di): 8.9 Db. Nominal Impedance: 8Ω. Transformer Taps. 70V: 68W, 34W, 17W, & 8.5W. 100V: 68W, 34W, 17W.
Enclosure Material: High Impact Polystyrene. Color: Black. Dimensions: 333 Mm (13.1 In) Diameter X 344 Mm (13.6 In) Height To Top Of Cabinet. 369 Mm (14.5 In) To Top Of Suspension Bracket. Net Weight: 7.5 Kg (16.5 Lbs). Shipping Weight: 17.2 Kg (38.0 Lbs). Included Accessories: Two Suspension Cable Systems, Two 2-Pin Removable Locking Euro-Block Connectors, Two Rubber Covers For Euro-Block Connectors..
Drivers: - 209 Mm (8 In) Kevlar(Tm) Reinforced Cone, 50 Mm (2 In) Ccaw Voice Coil On Fiberglass Voice Coil Former - 25 Mm (1.0 In) Compression Driver, Titanium Dome, Ferrite Magnet Assembly, Kapton(Tm) Voice Coil Former, Ccaw Voice Coil On Fiberglass Voice Coil Former. Terminals: Two Removable Locking Euro-Block 2-Pin Connectors With Screwdown Terminals For Bare Wire. Connectors Paralleled For Input And Loop-Thru. Max. Wire 12 Awg (2.5 Mm2).. Rubber Terminal Covers Included..
Ul Listed Speaker And Hanging Cable System. 8 Ohm And 70V/100V Operation. Extremely Consistent Constant-Directivity 110° Conical Coverage. Specifications: Frequency Range (-10Db): 52 Hz - 17 Khz. Frequency Response (+/-3 Db): 72 Hz - 16 Khz. Power Rating: - 150 Watts Continuous Pink Noise Power (600 Watts Peak, 100 Hrs) - 250 Watts Continuous Pink Noise Power (1000 Watts Peak, 2 Hrs) - 500 Watts Continuous Program Power (2 Hr). Sensitivity: 90 Db.

Features

  • Package Includes: (2) Pair JBI CONTROL 68HP High-Power 70v Commercial 8" Hanging Pendant Speakers. Features: Coaxial design featuring: 209 mm (8 in) Kevlar reinforced woofer with 50 mm (2 in) voice coil, 25 mm (1.0 in) titanium-dome compression driver. High power capability of 250 Watts (1000W peak) and high SPL of 114 dB (120 dB peak). Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp. Stylish design available in Black
  • UL listed speaker and hanging cable system. 8 ohm and 70V/100V operation. Extremely consistent constant-directivity 110 conical coverage. Specifications: Frequency Range (-10dB): 52 Hz - 17 kHz. Frequency Response (+/-3 dB): 72 Hz - 16 kHz. Power Rating: - 150 Watts Continuous Pink Noise Power (600 Watts peak, 100 hrs) - 250 Watts Continuous Pink Noise Power (1000 Watts peak, 2 hrs) - 500 Watts Continuous Program Power (2 hr). Sensitivity: 90 dB
  • Maximum SPL: 114 dB continuous pink noise, 120 dB peak. Coverage Angle: 110 conical. Directivity Factor (Q): 7.8. Directivity Index (DI): 8.9 dB. Nominal Impedance: 8 . Transformer Taps. 70V: 68W, 34W, 17W, & 8.5W. 100V: 68W, 34W, 17W
  • Drivers: - 209 mm (8 in) Kevlar(tm) reinforced cone, 50 mm (2 in) CCAW voice coil on fiberglass voice coil former - 25 mm (1.0 in) compression driver, titanium dome, ferrite magnet assembly, Kapton(tm) voice coil former, CCAW voice coil on fiberglass voice coil former. Terminals: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2).. Rubber terminal covers included.
  • Enclosure Material: High impact polystyrene. Color: Black. Dimensions: 333 mm (13.1 in) diameter x 344 mm (13.6 in) height to top of cabinet. 369 mm (14.5 in) to top of suspension bracket. Net Weight: 7.5 kg (16.5 lbs). Shipping Weight: 17.2 kg (38.0 lbs). Included Accessories: Two suspension cable systems, two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 16.00 x 28.00 x 14.00 inches

Amazon Price: $1,609.92 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #15

Audiosavings Bundle: (6) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker

Asin: B0CLFM6WJH   |   Model: (6) JBL-COL800-BK   |   PartNumber: (6) JBL-COL800-BK

300W Continuous Program (2 Hrs). 150W (600W Peak) Continuous Pink Noise (2 Hrs). 100W (400W Peak) Continuous Pink Noise (100 Hrs). Sensitivity (2.83V @ 1M): 88 Db. Vertical 60° [1 Khz-4 Khz Average]; 10° Down-Tilt To Vertical Aiming Axis For +20°/-40° Coverage In Relation To Physical Cabinet Aim. Horizontal 160° [1 Khz – 4 Khz Average]. Directivity (Q): 8.1. Directivity Index (Di): 9.1 Db. Rated Maximum Spl: 110 Db Continuous (116 Db Peak) @ 1M. Nominal Impedance: 8Ω (In Thru/Direct Mode).
Two 20 Mm (0.8 In.) Tweeters (Tweeters Located At Top Of Array For Better Coverage Of Listening Space). Enclosure Material: Pc + Abs, Ul94-V0 Flammability Rating. Grille: Plated Spcc With Polyester Powder Coat Finish. Agency Ratings: Transformer Ul Recognized. Rohs, Reach Compliance. Lvd For Ce.
Minimum Impedance: 7.7 Ω@ 290 Hz. Transformer Taps: 60W, 30W, 15W @ Both 70V & 100V (Plus 7.5W @ 70V), And 8Ω Thru, Selectable Via Switch. Transformer Insertion Loss: Less Than 1 Db For All Taps. Maximum Input Voltage: 33 V Rms (2 Hrs), 66 V Peak. Recommended Protective High-Pass: 75 Hz For 8 Ω Operation; 60 Hz For All Transformer Tap Settings (60W, 30W, 15W And 7.5W).. Four 125 X 55 Mm (5 X 2.25 In.) Racetrack Lf Drivers.
85 Hz – 20 Khz Frequency Range. Built-In 60W 70V/100V Multi-Tap Transformer, Plus 8 Ohm Direct Input. 116 Db Peak Spl (110 Db Continuous), 2 Hrs. Dual Tweeters Near Top Of Column For Unobstructed Coverage Of Listening Space. Versatile Mounting Brackets Included -- Both Close-To-Wall L-Brackets And Low-Profile Swivel(Pan)/Tilt Wall Bracket. Color: Black. Frequency Range (-10 Db)¹: 85 Hz – 20 Khz. Frequency Response (+/-3 Db): 125 Hz – 18 Khz. Power Rating (8Ω Setting)2 :.

Features

  • Package Includes: (6) JBI COL800-BK 32" Black 70V Commercial Slim Column Wall Mount Array Speaker. Features: Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters. 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth. Wide 160 horizontal and focused 60 vertical coverage. 10 downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet. 150W continuous pink noise power handling (600W peak)
  • 85 Hz 20 kHz frequency range. Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input. 116 dB peak SPL (110 dB continuous), 2 hrs. Dual tweeters near top of column for unobstructed coverage of listening space. Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracket. Color: Black. Frequency Range (-10 dB) : 85 Hz 20 kHz. Frequency Response (+/-3 dB): 125 Hz 18 kHz. Power Rating (8 setting)2 :
  • 300W Continuous Program (2 hrs). 150W (600W peak) Continuous Pink Noise (2 hrs). 100W (400W peak) Continuous Pink Noise (100 hrs). Sensitivity (2.83V @ 1m): 88 dB. Vertical 60 [1 kHz-4 kHz average]; 10 down-tilt to vertical aiming axis for +20 /-40 coverage in relation to physical cabinet aim. Horizontal 160 [1 kHz 4 kHz average]. Directivity (Q): 8.1. Directivity Index (DI): 9.1 dB. Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m. Nominal Impedance: 8 (in Thru/direct mode)
  • Minimum Impedance: 7.7 @ 290 Hz. Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8 thru, selectable via switch. Transformer Insertion Loss: Less than 1 dB for all taps. Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak. Recommended Protective High-Pass: 75 Hz for 8 operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W).. Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers
  • Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space). Enclosure Material: PC + ABS, UL94-V0 flammability rating. Grille: Plated SPCC with polyester powder coat finish. Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 4.00 x 32.00 x 4.00 inches

Amazon Price: $3,000.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #16

Audiosavings Bundle: JBI CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs Bundle with (16) Rockville DCS6T 70V Commercial 6.5" 2' X 1' Drop Ceiling Tile Speaker (17 Items)

Asin: B0CLFHSNKQ   |   Model: CSMA280+(16) DCS6T   |   PartNumber: CSMA280+(16) DCS6T

Number Of Channels: Input: 8, Output: 2.. Frequency Response: Measured At 2.83 V Rms Into Rated Load Impedance At Any Output. 4/8 Ohms Output: 20 Hz - 20 Khz, ±2 Db. 70 V/100 V Outputs: 80 Hz - 15 Khz ±2 Db. Line Out: 20 Hz - 20 Khz, ±1 Db. Total Harmonic Distortion (Thd): Measured At 2.83 V Rms Into Rated Load Impedance At Any Output. Power Amplifier Output: <0.5%, 20 Hz To 20 Khz. Line Output: 0.05% Typical. Signal To Noise Ratio: > 90 Db.
2 X Vox Adjustment Switches. Indicators: Front Panel: 8 X Input Signal Presence Ring, Green. 2 X Output Volume Ring, Green. 1 X Power Switch Ring, Green/Blue. Connectors: Rear Panel: 1 X Iec Power Input. 2 X Aux Out Connection Points. 6 X 3-Pin Euroblock Connectors. 6 X 3-Pin Euroblock Connectors. 2 X 5-Pin Euroblock Connectors. 6 X Dual Rca Input Connectors. 2 X Rj45, Remote Volume. Operating Temperature / Humidity: 32 To 95°F / 0 To 35°C, 95% Rh (Non-Condensing).
Nominal Input Impedance: Mic: 400 Ohms. Line: 20 Kohms (Balanced). Rca: 50 Kohms.. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms.. Crosstalk: -70 Db @ 1 Khz. Controls: Front Panel: 8 X Input Level Rotary Knobs. 2 X Output Volume-Attenuating Knobs. 1 X Power Switch. 2 X Bass Potentiometers. 2 X Treble Potentiometers. Rear Panel: 2 X Input-Routing Dip Switches (Including Phantom And Hi-Z Switches). 8 X Mic/Line Selector Switch.
Sleep Mode & 2 Auxiliary Outputs. Voice Activated Ducking & Priority Mute. Specifications: Maximum Output Power: 800 W Per Channel Into 4 Ohms Or 8 Ohms, 1 Khz, = 0.5% Thd. Insertion Loss: 1 Db Maximum For 70 And 100 V Outputs. Continuous Power: 10 W Per Channel. Line Output Level: 5.0 V Rms Into 10 Kohms. Input Sensitivity: To Obtain Full Rated Power At 8 Ohms (Or 5 Vrms To Line Output). Mic Input: 3 Mv Rms. Line Input: 775 Mv Rms. Rca Input: 300 Mv Rms.

Features

  • Package Includes: (1) JBI CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs. (16) Rockville DCS6T 70V Commercial 6.5" 2' X 1' Drop Ceiling Tile Speaker For Office. Features: JBI CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V and 8 inputs. For Commercial and Industrial Use. 80W into 8 or 4 Ohm Loads. 10W Per Channel. 8 Input Channels, 2 Output Channel. Usable with 70 & 100V Systems. Euroblock Mic/Line & RCA Inputs. Hi-Z & 27V Phantom Power Switches
  • Sleep Mode & 2 Auxiliary Outputs. Voice Activated Ducking & Priority Mute. Specifications: Maximum Output Power: 800 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD. Insertion Loss: 1 dB maximum for 70 and 100 V outputs. Continuous Power: 10 W per channel. Line Output Level: 5.0 V RMS into 10 kOhms. Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS
  • Number of Channels: Input: 8, Output: 2.. Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz 2 dB. Line Out: 20 Hz - 20 kHz, 1 dB. Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical. Signal to Noise Ratio: > 90 dB
  • Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms.. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms.. Crosstalk: -70 dB @ 1 kHz. Controls: Front Panel: 8 x Input level rotary knobs. 2 x Output volume-attenuating knobs. 1 x Power switch. 2 x Bass potentiometers. 2 x Treble potentiometers. Rear Panel: 2 x Input-routing dip switches (including phantom and Hi-Z switches). 8 x Mic/Line selector switch
  • 2 x Vox adjustment switches. Indicators: Front Panel: 8 x Input signal presence ring, green. 2 x Output volume ring, green. 1 x Power switch ring, green/blue. Connectors: Rear Panel: 1 x IEC power input. 2 x Aux out connection points. 6 x 3-pin euroblock connectors. 6 x 3-pin euroblock connectors. 2 x 5-pin euroblock connectors. 6 x Dual RCA input connectors. 2 x RJ45, remote volume. Operating Temperature / Humidity: 32 to 95 F / 0 to 35 C, 95% RH (non-condensing)
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 5.00 x 21.00 x 16.00 inches

Amazon Price: $1,954.15 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #17

Audiosavings Bundle: (5) (2) JBI Control 64P/T 4" 30w Commercial 70v Hanging Pendant Speakers C64P/T-WH

Asin: B0CLF9W6T2   |   Model: (5) C64P/T-WH   |   PartNumber: (5) C64P/T-WH

Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W 100V: 30W, 15W, 7.5W. Transformer Insertion Loss: 0.94Db @ 3.7W, 0.89Db @ 7.5W, 0.83Db @ 15W, 0.94Db @ 30W. Drivers: 100 Mm (4 In) Polypropylene-Coated Paper With Cloth Surround, 20 Mm (0.8 In) Copper Voice Coil. Enclosure: High Impact Polystyrene. Grille: Zinc-Plated Steel Grille With Powder-Coat Finish, Foam Backing (Removable For Painting).
Suspension: Two Identical Suspension Systems (One As Main Suspension Cable And The Other As Safety Cable), Each Consisting Of 4.5 M (15 Ft) Long 2 Mm (0.077 In) High-Tensile Galvanized-Steel Wire Rope Suspension Cable With Spring-Clips For Clipping Onto The Loudspeaker Bracket And Gripple Brand Adjustable-Height Cable Fasteners For Infinitely Adjustable Height. Cables Have Swl Rating Of 45 Kg (99 Lb)..
Outdoor Capability: Exceeds Mil Spec 810 For Humidity, Salt Spray, Temperature & Uv. Ip44 Capability Per Iec 529 - Splash-Proof Rating.. Input Connectors: Two Removable Locking Euro-Block 2-Pin Connectors With Screw-Down Terminals For Bare Wire. Connectors Paralleled For Input And Loop-Thru. Max. Wire 12 Awg (2.5 Mm2). Rubber Terminal Covers Included..
Frequency Response (±3 Db): 85Hz - 14 Khz. Power Rating: 100 W Continuous Program (2 Hrs) 50 W (200W Peak), Continuous Pink Noise (2 Hrs) 40 W (160W Peak) Continuous Pink Noise (100 Hrs). Maximum Input Voltage: 18.2 V Rms (2 Hrs), 36.4 V Peak. Nominal Sensitivity: 88 Db Nominal. Coverage Angle: 120° (Averaged 1 Khz To 4 Khz). Directivity Factor (Q): 6.2. Directivity Index (Di): 7.3Db (Averaged 1Khz - 16Khz). Maximum Spl (1M): 105 Db Continuous Pink Noise, 111 Db Peak. Impedance: 8O.

Features

  • Package Includes: (5) (2) JBI Control 64P/T 4" 30w Commercial 70v Hanging Pendant Speakers C64P/T-WH. Features: 100 mm (4 in) full-range driver with polypropylene-coated cone and 20 mm (0.8 in) high temperature voice coil.. Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp.. Stylish design, available in black or white (-WH).. UL listed (speaker and hanging cable system).. 8O and 70V/100V operation. Specifications: Frequency Range (-10dB): 65 Hz - 15 kHz
  • Frequency Response ( 3 dB): 85Hz - 14 kHz. Power Rating: 100 W Continuous Program (2 hrs) 50 W (200W peak), Continuous Pink Noise (2 hrs) 40 W (160W peak) Continuous Pink Noise (100 hrs). Maximum Input Voltage: 18.2 V RMS (2 hrs), 36.4 V peak. Nominal Sensitivity: 88 dB Nominal. Coverage Angle: 120 (averaged 1 kHz to 4 kHz). Directivity Factor (Q): 6.2. Directivity Index (DI): 7.3dB (averaged 1kHz - 16kHz). Maximum SPL (1m): 105 dB continuous pink noise, 111 dB peak. Impedance: 8O
  • Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W 100V: 30W, 15W, 7.5W. Transformer Insertion Loss: 0.94dB @ 3.7W, 0.89dB @ 7.5W, 0.83dB @ 15W, 0.94dB @ 30W. Drivers: 100 mm (4 in) polypropylene-coated paper with cloth surround, 20 mm (0.8 in) copper voice coil. Enclosure: High impact polystyrene. Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
  • Outdoor Capability: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splash-proof rating.. Input Connectors: Two removable locking euro-block 2-pin connectors with screw-down terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
  • Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 13.00 x 11.00 x 11.00 inches

Amazon Price: $1,575.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #18

Audiosavings Bundle: (4) JBI Control 64P/T 4" 30w Commercial 70v Hanging Pendant Speakers C64P/T-WH

Asin: B0CLF98QDG   |   Model: (2) C64P/T-WH   |   PartNumber: (2) C64P/T-WH

Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W 100V: 30W, 15W, 7.5W. Transformer Insertion Loss: 0.94Db @ 3.7W, 0.89Db @ 7.5W, 0.83Db @ 15W, 0.94Db @ 30W. Drivers: 100 Mm (4 In) Polypropylene-Coated Paper With Cloth Surround, 20 Mm (0.8 In) Copper Voice Coil. Enclosure: High Impact Polystyrene. Grille: Zinc-Plated Steel Grille With Powder-Coat Finish, Foam Backing (Removable For Painting).
Suspension: Two Identical Suspension Systems (One As Main Suspension Cable And The Other As Safety Cable), Each Consisting Of 4.5 M (15 Ft) Long 2 Mm (0.077 In) High-Tensile Galvanized-Steel Wire Rope Suspension Cable With Spring-Clips For Clipping Onto The Loudspeaker Bracket And Gripple Brand Adjustable-Height Cable Fasteners For Infinitely Adjustable Height. Cables Have Swl Rating Of 45 Kg (99 Lb)..
Outdoor Capability: Exceeds Mil Spec 810 For Humidity, Salt Spray, Temperature & Uv. Ip44 Capability Per Iec 529 - Splash-Proof Rating.. Input Connectors: Two Removable Locking Euro-Block 2-Pin Connectors With Screw-Down Terminals For Bare Wire. Connectors Paralleled For Input And Loop-Thru. Max. Wire 12 Awg (2.5 Mm2). Rubber Terminal Covers Included..
Frequency Response (±3 Db): 85Hz - 14 Khz. Power Rating: 100 W Continuous Program (2 Hrs) 50 W (200W Peak), Continuous Pink Noise (2 Hrs) 40 W (160W Peak) Continuous Pink Noise (100 Hrs). Maximum Input Voltage: 18.2 V Rms (2 Hrs), 36.4 V Peak. Nominal Sensitivity: 88 Db Nominal. Coverage Angle: 120° (Averaged 1 Khz To 4 Khz). Directivity Factor (Q): 6.2. Directivity Index (Di): 7.3Db (Averaged 1Khz - 16Khz). Maximum Spl (1M): 105 Db Continuous Pink Noise, 111 Db Peak. Impedance: 8O.

Features

  • Package Includes: (2) (2) JBI Control 64P/T 4" 30w Commercial 70v Hanging Pendant Speakers C64P/T-WH. Features: 100 mm (4 in) full-range driver with polypropylene-coated cone and 20 mm (0.8 in) high temperature voice coil.. Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp.. Stylish design, available in black or white (-WH).. UL listed (speaker and hanging cable system).. 8O and 70V/100V operation. Specifications: Frequency Range (-10dB): 65 Hz - 15 kHz
  • Frequency Response ( 3 dB): 85Hz - 14 kHz. Power Rating: 100 W Continuous Program (2 hrs) 50 W (200W peak), Continuous Pink Noise (2 hrs) 40 W (160W peak) Continuous Pink Noise (100 hrs). Maximum Input Voltage: 18.2 V RMS (2 hrs), 36.4 V peak. Nominal Sensitivity: 88 dB Nominal. Coverage Angle: 120 (averaged 1 kHz to 4 kHz). Directivity Factor (Q): 6.2. Directivity Index (DI): 7.3dB (averaged 1kHz - 16kHz). Maximum SPL (1m): 105 dB continuous pink noise, 111 dB peak. Impedance: 8O
  • Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W 100V: 30W, 15W, 7.5W. Transformer Insertion Loss: 0.94dB @ 3.7W, 0.89dB @ 7.5W, 0.83dB @ 15W, 0.94dB @ 30W. Drivers: 100 mm (4 in) polypropylene-coated paper with cloth surround, 20 mm (0.8 in) copper voice coil. Enclosure: High impact polystyrene. Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
  • Outdoor Capability: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splash-proof rating.. Input Connectors: Two removable locking euro-block 2-pin connectors with screw-down terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
  • Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 13.00 x 11.00 x 11.00 inches

Amazon Price: $700.00 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon




  #19

Audiosavings Bundle: (3) Pair JBI Control 126 WT 6.5" 30w Commercial 70v in-Wall Speakers for Restaurant/Bar

Asin: B0CLF96QCZ   |   Model: (3) CONTROL 126WT   |   PartNumber: (3) CONTROL 126WT

Drivers: Lf: 165 Mm (6.5 In) Polymer-Coated Aluminum Cone., Hf: 25 Mm (1 In) Pure-Titanium Dome With Cloth Suspension On Low-Diffraction Swivel-Mount With -10 Degree Aimability.. Input Connectors: Screw-Down Euroblock-Type Connector. Max Wire Size 14 Awg (1.5 Mm)2. Crossover Network: 3Rd Order (18 Db/Oct) Low Pass To The Woofer And 3Rd Order (18 Db/Oct) High Pass To The Tweeter..
Included Accessories: Cutout Template & Paint Shield. Optional Accessories: Wb6 Rough-In Frame For Newconstruction Installation To Wallstuds.
Optimum Air Cavity Behind Speaker: 20 To 40 Liters (0.7 To 1.4 Cu Ft). Outside Dimensions (H X W X D): 280 X 215 X 105 Mm (11 X 8.5 X 4.1 In), 99 Mm (3.8 In) Front Of Wall To Back Of Speaker.. Maximum Wall Thickness: 2 Mm (1.25 In). Cutout Size (H X W): 246 X 181 Mm (9.7 X 7.2 In),. Net Weight (Each): 2.7 Kg (5.9 Lb). Shipping Weight (Ea): 6.2 Kg (13.5 Lb).
50W Continuous (100W Program, 200W Peak) Power Handling (126W).. Specifications: Frequency Range: 38 Hz - 20 Khz (-10 Db). Power Rating: 200 W Peak 100 W Continuous Program Power50 W Continuous Pink Noise. Transformer Taps: 70 V: 30 W, 15 W, 7.5 W & 3.7 W Taps. Sensitivity: 88 Db Spl. Coverage: 180°H X 160°V (Ave. 1 Khz - 8 Khz). Impedance: 8 Ohms.

Features

  • Package Includes: (3) 2 JBI Control 126 WT 6.5" 30w Commercial 70v In-Wall Speakers For Restaurant/Bar. Features: Components: 165 mm (6.5 in) polymer-coated aluminum-cone woofer with pure butyl rubber surround.. 25 mm (1 in) pure-titanium dome low diffraction swivel aimable titanium tweeter.. High-slope crossover for natural midrange sound.. Extended bandwidth performance of 38 Hz - 20 kHz.
  • 50W continuous (100W program, 200W peak) power handling (126W).. Specifications: Frequency Range: 38 Hz - 20 kHz (-10 dB). Power Rating: 200 W Peak 100 W Continuous Program Power50 W Continuous Pink Noise. Transformer Taps: 70 V: 30 W, 15 W, 7.5 W & 3.7 W taps. Sensitivity: 88 dB SPL. Coverage: 180 H x 160 V (ave. 1 kHz - 8 kHz). Impedance: 8 ohms
  • Drivers: LF: 165 mm (6.5 in) polymer-coated aluminum cone., HF: 25 mm (1 in) pure-titanium dome with cloth suspension on low-diffraction swivel-mount with -10 degree aimability.. Input Connectors: Screw-down Euroblock-type connector. Max wire size 14 AWG (1.5 mm)2. Crossover Network: 3rd order (18 dB/oct) Low Pass to the woofer and 3rd order (18 dB/oct) High Pass to the tweeter.
  • Optimum Air Cavity Behind Speaker: 20 to 40 liters (0.7 to 1.4 cu ft). Outside Dimensions (H x W x D): 280 x 215 x 105 mm (11 x 8.5 x 4.1 in), 99 mm (3.8 in) front of wall to back of speaker.. Maximum Wall Thickness: 2 mm (1.25 in). Cutout Size (H x W): 246 x 181 mm (9.7 x 7.2 in),. Net Weight (each): 2.7 kg (5.9 lb). Shipping Weight (ea): 6.2 kg (13.5 lb)
  • Included Accessories: Cutout template & paint shield. Optional Accessories: WB6 Rough-In Frame for newconstruction installation to wallstuds
  • See more on Amazon...

Brand: Audiosavings   |   Manufacturer: JBL

Dimensions: 9.00 x 12.00 x 10.00 inches

Amazon Price: $1,198.80 | as of 06/05/2024 (3:08pm pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


| GistGear © 2021 |

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.