Complete Upgraded Hot End Extruder Printhead Kit for The Sidewinder-X2 & 3D Printer 3D Printer Hotend Direct Drive Extruder Kit Great Hot End Extrusion Head BL-Touch for SW-X2
Asin: B0CMQQFCFL | Ean: 7448693526262
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.It Is All There With A Quilting Motor, Thermistor, Heater-Cartridge, Circuit Board, Led Circuit Board, Complete Hotend And Heating Sock..
Easy To Replace: Just Pull Out The Ribbon Cable, Loosen 3 Bolts, Remove One Head, Replace With Another, Screw In Bolts Again, Return The Ribbon Cable To The Slot, And Level It-Again.
Keep Your Printer Running Smoothly With The Simple And Efficient Replacement Process Of The Sw Print Head Nozzle Assembly..
Replace Your Printer Head With Ease Using The Sw Print Head Nozzle Assembly..
Features
- 3D printer SW-X2 extruder kit all-in-one single extrusion head with BL-touch &hotend.
- Replace your printer head with ease using the SW print head nozzle assembly.
- it is all there with a quilting motor, thermistor, heater-cartridge, circuit board, LED circuit board, complete hotend and heating sock.
- Keep your printer running smoothly with the simple and efficient replacement process of the SW print head nozzle assembly.
- Easy to replace: Just pull out the ribbon cable, loosen 3 bolts, remove one head, replace with another, screw in bolts again, return the ribbon cable to the slot, and level it-again
- See more on Amazon...
Brand: Acinkeety | Manufacturer: Acinkeety
See On Amazon Similar To Complete Upgraded Hot End Extruder
#1
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #2
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 Inches
See On Amazon #3
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #4
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #5
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #6
Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>21.5mm)
Asin: B09H6T3NNT | Model: RDX3D032 | PartNumber: RDX3D032
【Spring Adjustable Extruder】The Extrusion Spring Tension Could Be Adjusted By Tighten The Screw,Which Greatly Improves The Printing Accuracy And Feeding Issue..
【Kindly Reminder】:Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use;For 3D Printers With Filament Detector,As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height;For Vyper Users,Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse.
【Application】:This All Metal Dual Drive Extruder Is Compatible With Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,Cr10 S Series 3D Printer.Only Suit For 3D Printers With Motor Shaft Over 20Mm,Please Measure The Shaft Length Before Placing The Order..
【Upgraded Idler Gear Design】This Idler Gear Is Upgraded With Two Washers On Both Sides, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Features
- Double Gear Extrusion Mechanism :The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- Spring Adjustable Extruder The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
- Application :This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
- Kindly Reminder :Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse
- See more on Amazon...
Brand: REDREX | Manufacturer: Redrex
Dimensions: 1.96 x 0.98 x 2.20 inches | Weight: 0.13 pounds
See On Amazon #7
Creality Official Upgrade K1 MAX Extruder, 50N Strong Extrusion Force & Dual Gear Design Provide Smooth and Precise Feeding, Compatible with Creality K1/K1 MAX/K1C/Ender 3 V3/3 V3 Plus
Asin: B0CM5BBGGD
Smooth Feeding And High Torque - 50N Strong Extrusion Force & Dual Gear Design Enhances Filament Extrusion Performance, Resulting In Smoother Printing Leading To Exquisitely Detailed Models..
After-Sale Service - There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Year Limited And Lifetime Technical Assistance. Please Contact Us Via “Ask A Question”Directly To Get The Professional Assistance..
Wide Compatibility - Compatible With Creality K1/ K1 Max 3D Printers And Also Works Well With Various Filaments Like Pla/Pla+/Hyper/Tpu/Petg/Abs, Ect..
Hummingbird Extruder - Provided The Integrity Of The Filament, Providing Stable, Smooth, And Precise Filament Feeding. Its High-Quality All-Metal Body Design Is Compact, Sleek, And Efficient In Heat Dissipation..
Features
- Official Guarantee - 100% Creality official extruder, compatibility with creality K1/ K1 MAX/ K1 C/ Ender 3 V3/ Ender 3 V3 Plus 3D Printer. Easy to install and No firmware or software required.
- Hummingbird Extruder - Provided the integrity of the filament, providing stable, smooth, and precise filament feeding. Its high-quality all-metal body design is compact, sleek, and efficient in heat dissipation.
- Smooth Feeding and High Torque - 50N strong extrusion force & dual gear design enhances filament extrusion performance, resulting in smoother printing leading to exquisitely detailed models.
- Wide Compatibility - Compatible with Creality K1/ K1 MAX 3D Printers and also works well with various filaments like PLA/PLA+/Hyper/TPU/PETG/ABS, ect.
- After-sale Service - There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a question directly to get the professional assistance.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 pounds
See On Amazon #9
Creality Official Ender 3 V3 KE Ceramic Hotend Kit, Ender 3 V3 KE Ceramic Heating Block Kit, 300 C High Temperature Resistance Extruder Hot End, All Metal Thermal Conductivity Hotend Replacement
Asin: B0CRDQGR3F
Faster Printing Experience - Ender 3 V3 Ke Assembled Extruder Hot End Kit Has Been Assembled In Advance , All You Have To Do Is Plug In The Wires. Ender 3 V3 Ke 3D Printer Can Print At Up To 600Mm/S Speed , Faster Than Most Of Printers On The Market. You Can Complete Models Efficiently, Saving Time To Wait For Print Jobs..
All-Metal Design - Support 300℃ High Temperature Printing. Compatible With More Filaments, Such As Pla, Abs, Petg, Tpu, Pa, Pc, Pla-Cf, Pa-Cf, Pet-Cf, Etc..
Process Upgrades For Better Printing - The Throat Is Made Of Titanium Alloy, Thin-Walled And Thick Throat, Brings Excellent Heat Insulation Performance. A0.4 High Thermal Conductivity Uniform Heating - Ceramic Heating Ring For Improved Heating Efficiency And Faster Heat Transfer, More Uniform Heating..
Features
- Ender 3 V3 KE Ceramic Hotend Kit - 100% Creality official heating block kit, compatible for Creality Ender 3 V3 KE 3D Printer.
- High Thermal Conductivity Uniform Heating - Ceramic heating ring for improved heating efficiency and faster heat transfer, more uniform heating.
- Faster Printing Experience - Ender 3 V3 KE assembled extruder hot end kit has been assembled in advance , all you have to do is plug in the wires. Ender 3 V3 KE 3d printer can print at up to 600mm/s speed , faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs.
- Process Upgrades for Better Printing - The throat is made of titanium alloy, thin-walled and thick throat, brings excellent heat insulation performance. a0.4
- All-metal Design - Support 300 high temperature printing. Compatible with more filaments, such as PLA, ABS, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, etc.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #10
Upgraded Official Creality Spider All Metal Hotend Kit, Support 300 High Temperature Printing, Fits Ender3/Ender3 Pro/Ender3 V2/Ender3 Max/Ender 3s/Ender 5/Ender5 Pro/Ender5 Plus/CR10 (32Bit, 24V)
Asin: B0CBV1BSB3 | Model: UNIDO-yh-07 | PartNumber: UNIDO-yh-07 | Ean: 0792105752419 | UPC: 792105752419
【Wide Compatibility】This All Metal Hotend Kit For 3D Printers Is Compatible With A Wide Range Of Models, Including Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 Max, Ender 3S, Ender-5, Ender-5 Pro, Ender-5 Plus, Cr-10, Cr-10S, Cr-10 S5, Cr-10 S4, Cr-10Mini, Ender-6, Ender-4, Ender2 Pro, Ender-2, Cr-20, And Cr-20 Pro. For Some Older Models, Please Make Sure Its 32Bit Mother Board And 24V Voltage, Otherwise, It Is Not Compatible..
【180-Day Warranty】 Enjoy Peace Of Mind With Our 180-Day Warranty Covering Any Issues That May Arise. Additionally, We Offer Lifetime Professional Technical Support. If You Encounter Any Problems While Using The Product, Please Don't Hesitate To Reach Out To Us (The Seller) Directly Through The "Ask A Question"..
【Simple Installation】 With Modular Standard Interface Design And Universal Standard Nozzle, This Upgrade Spider Hotend Kit Is Very Easy To Install, This Kit Included Spider High-Temperature Hotend*1, Copper Tube*1, M3×20 Screw*2, Wrench*1, Hexagonal Wrench*3, Thermal Grease*1.
【Enhanced Structure For Efficient Heat Dissipation】Experience Fast Heat Dissipation With The Upgraded Heat Block, Featuring A Split Design That Reduces Heat Transfer For Improved Efficiency. Crafted From A Premium Copper Alloy, Both The Heat Block And Nozzle Boast A Smooth Inner Wall With A Roughness Of Ra0.3, Ensuring Enhanced Print Quality Like Never Before..
Features
- Up To 300 High Temperature Resistance, Compatible With Most Filaments The upgraded Creality Spider All Metal Hotend boasts a meticulously designed structure and carefully chosen materials, enabling it to withstand temperatures of up to 300 . This exceptional capability allows for superior 3D printing results with high temperature filaments. Moreover, its compatibility extends to a wide array of filaments, including PLA, ABS, PETG, TPU, PP, PC, PEEK, PEI, Nylon, and many others.
- Enhanced Structure for Efficient Heat Dissipation Experience fast heat dissipation with the upgraded heat block, featuring a split design that reduces heat transfer for improved efficiency. Crafted from a premium copper alloy, both the heat block and nozzle boast a smooth inner wall with a roughness of Ra0.3, ensuring enhanced print quality like never before.
- Wide Compatibility This all metal hotend kit for 3D printers is compatible with a wide range of models, including Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 Max, Ender 3s, Ender-5, Ender-5 Pro, Ender-5 Plus, CR-10, CR-10S, CR-10 S5, CR-10 S4, CR-10Mini, Ender-6, Ender-4, Ender2 Pro, Ender-2, CR-20, and CR-20 Pro. For some older models, please make sure its 32BIT MOTHER BOARD and 24V VOLTAGE, otherwise, it is not compatible.
- Simple Installation With modular standard interface design and universal standard nozzle, this upgrade Spider hotend kit is very easy to install, this kit included Spider High-temperature Hotend*1, Copper tube*1, M3 20 screw*2, Wrench*1, Hexagonal wrench*3, Thermal Grease*1
- 180-day Warranty Enjoy peace of mind with our 180-day warranty covering any issues that may arise. Additionally, we offer lifetime professional technical support. If you encounter any problems while using the product, please don't hesitate to reach out to us (the seller) directly through the Ask a Question.
- See more on Amazon...
First Available: 09/05/2023
Brand: UNIDO | Manufacturer: Unido
Warranty: 180 Days
See On Amazon
Looking For Something Else?
Search