Sunydog 2.4" TFT LCD Visual Monitor Door Peephole Wireless Viewer Camera Digital Electric Peephole Doorbell Monitor
Asin: B0CMQS82KC
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.*Easy For Installation:Diy, Only Need A Few Minutes To Install..
*Wide Users Scopes Including Elder,Little Children,Old Men With Poor Eyesight.Low Power Consumption:The Host Is Powered By 2*Aa Batteries(Not Included) And It Is Very Convenient For Changing The Batteries..
*Low Power Remind Function:When The Power Is Not Enough,The Indicator At The Right Bottom Of Screen Emits Light. It Shows That We Should Change Battery Immediately,Very Convenient And Practical..
*Digital Electric Peephole,Also Called Electric Door-Eye,Which Plays An Important Role In Home Anti-Theft Door, It Is Composed Of Digital Camera And Display Screen,More Accurate And S..
Features
- *2.4" LCD visual monitor with one outdoor door peephole,picture pixels is 300000,clear image and LCD screen superior to traditional doorbell,it can show images clearly and smoothly.
- *Digital electric peephole,also called electric door-eye,which plays an important role in home anti-theft door, it is composed of digital camera and display screen,more accurate and s.
- *Easy for installation:DIY, only need a few minutes to install.
- *Low power remind function:When the power is not enough,the indicator at the right bottom of screen emits light. It shows that we should change battery immediately,very convenient and practical.
- *Wide users scopes including elder,little children,old men with poor eyesight.Low power consumption:the host is powered by 2*AA batteries(not included) and it is very convenient for changing the batteries.
- See more on Amazon...
Brand: Sunydog | Manufacturer: Sunydog
Dimensions: 1.57 x 6.57 x 3.74 inches
See On Amazon Similar To Sunydog 2.4 TFT LCD Visual
#1
GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things
Asin: B07S7PJYM6 | Ean: 0703501205768 | UPC: 703501205768
Compatible With All Current Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32 And So On.
With A Potentiometer Used To Adjust Backlight (Color: Blue) And Contrast.Power Supply: 5V And I2c Address Is: 0X27 Module Dimension: 80Mm X 35Mm X 11Mm.
Commonly Used In: Internet Of Things, Diy Project, Home Animation, Smartbuilding, Maker's Diy Project..
Features
- Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
- Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.
- Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on
- With a potentiometer used to adjust backlight (Color: Blue) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Dimensions: 0.28 x 3.15 x 1.22 inches
See On Amazon #2
SunFounder IIC I2C TWI 1602 Serial LCD Module Display Compatible with Arduino R3 Mega 2560 16x2
Asin: B019K5X53O | Model: TS0351 | PartNumber: TS0351 | Ean: 0701715367685 | UPC: 701715367685
With A Potentiometer Used To Adjust Backlight And Contrast..
Address Of The Module: Ox27..
Power Supply: +5V.
Support Iic Protocol. The I2c Lcd1602 Library Is Provided, So You Can Call It Directly..
Features
- Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line).
- Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly.
- With a potentiometer used to adjust backlight and contrast.
- Power supply: +5V
- Address of the module: ox27.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.40 x 4.90 x 1.70 inches
Warranty: 1 Year Warranty
See On Amazon #3
Hosyond 3pcs I2C IIC 1602 LCD Display Module 16x02 LCD Screen Module for Arduino Raspberry Pi
Asin: B0BWTFN9WF | Ean: 0732214748071 | UPC: 732214748071
Power Supply: 5V; I2c Address: 0X27; Wiring Method: Gnd—Gnd, Vcc—Vcc, Sda—A4, Scl—A5..
Widely Used In: Internet Of Things, School Electronics Projects, Smart Buildings, Maker Diy Projects, Etc., Can Display Letters, Characters, Numbers, Real-Time Clock Or Temperature..
Compatible With Most Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32, Etc..
Built-In Independent Potentiometer, Backlight Can Be Adjusted Through The Back Potentiometer..
Features
- 1602 LCD screen can display 2 lines x 16 characters, with i2c serial interface, blue display.
- Built-in independent potentiometer, backlight can be adjusted through the back potentiometer.
- Power supply: 5v; I2C address: 0x27; wiring method: GND GND, VCC VCC, SDA A4, SCL A5.
- Compatible with most development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32, etc.
- Widely used in: Internet of Things, school electronics projects, smart buildings, maker DIY projects, etc., can display letters, characters, numbers, real-time clock or temperature.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Warranty: Hosyond
See On Amazon #4
ELEGOO UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket with Technical Data for Arduino UNO R3 R4
Asin: B01EUVJYME | Model: EL-SM-004 | PartNumber: EL-SM-004 | Ean: 0746591610555 | UPC: 746591610555
With Touch Pen Inside, You Can Use It More Easily.
We Have Always Cared About The Customer Experience And Improve The Product Function Details.
Not Including The Uno R3 Controller Board And Usb Cable.
2. 8 Inches Colorful Display Lcd Screen.
Features
- Free tutorial in cd, better price, better service. (With technical data)
- 2. 8 inches colorful display lcd screen
- With touch pen inside, you can use it more easily
- Not including the uno R3 controller board and usb cable
- We have always cared about the customer experience and improve the product function details
- See more on Amazon...
First Available: 08/04/2017
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 0.79 x 3.15 x 2.17 inches | Weight: 0.08 pounds
See On Amazon #5
HiLetgo 2pcs HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Blue Blacklight New
Asin: B00HJ6AFW6 | Model: 3-01-0045 | PartNumber: 3-01-0045 | Ean: 0797698770062 | UPC: 797698770062
Can Display 2-Lines X 16-Characters.
Viewing Area Size: 64.5Mm X 16Mm.
Commonly-Used Hd44780 Controller Is Built In This 1602 Lcd Module.
1602 Lcd Display Module.
Features
- HD44780 1602 LCD Display Module DC 5V Blue Blacklight
- 1602 LCD Display Module
- Can display 2-lines X 16-characters
- Commonly-used HD44780 controller is built in this 1602 LCD module
- Viewing area size: 64.5mm x 16mm
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
Asin: B073R7BH1B | Model: 3-01-1433 | PartNumber: 3-01-1433
Viewing Direction: 6 O’Clock.
With Pcb Plate (Including Power Supply Ic, Sd), Compatible With 5110 Interface.
Pixel Arrangement: Rgb Vertical Stripe.
Resolution (Dots): 240Rgb*320Dots.
Features
- Driver element: a-Si TFT active matrix
- Resolution (dots): 240RGB*320Dots
- Viewing Direction: 6 o clock
- Pixel arrangement: RGB vertical stripe
- With PCB plate (including power supply IC, SD), compatible with 5110 interface
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560
Asin: B073R7Q8FF | Model: 3-01-1434 | PartNumber: 3-01-1434
Onborad Level Conversion Chip For 5V/3.3V Mcu.
Compatible With Arduino-Series Development Board. (Please Notice:This Screen Is Not Touch Screen).
Compatible With 3.3/5V Operation Voltage Level.
Support Arduino Mega2560 Directly Inserted.
Features
- 3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560
- Support Arduino Mega2560 Directly inserted
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5V operation voltage level
- Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Yellow Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things
Asin: B0BCWFB5P3
Compatible With All Current Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32 And So On.
Wiki:Http://Wiki.52Pi.Com/Index.Php?Title=1602_Serial_Lcd_Module_Display_Sku:Z-0234.
With A Potentiometer Used To Adjust Backlight (Color: Yellow) And Contrast.Power Supply: 5V And I2c Address Is: 0X27 Module Dimension: 80Mm X 35Mm X 11Mm.
Commonly Used In: Internet Of Things, Diy Project, Home Animation, Smartbuilding, Maker's Diy Project..
Features
- Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
- Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.
- Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on
- With a potentiometer used to adjust backlight (Color: Yellow) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm
- Wiki:http://wiki.52pi.com/index.php?title=1602_Serial_LCD_Module_Display_SKU:Z-0234
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Warranty: no
See On Amazon #9
Weewooday 8 Pieces IIC/ I2C/ TWI LCD Serial Interface Adapter and LCD Module Display Backlight Compatible with Arduino R3 MEGA2560 (Blue,LCD 1602 16 x 2)
Asin: B08MPTND1V | Model: Weewooday-3275 | PartNumber: Weewooday-3275
Compatibility: 1602 Icd Display With I2c Serial Interface Is Compatible With For Arduino And Raspberry Pi; Working Voltage: 5V; To Come With A Potentiometer, Which Is Applied To Adjust Backlight And Contrast; How To Wire: Gnd—Gnd; Vcc—Vcc; Sda—A4; Scl—A5.
Display Function: 1602 Icd Display With I2c Serial Interface Can Be Applied To Display Real Time Clock, Temperature, Humidity And So On; (A Potentiometer Is Also Necessary To Adjust The Contrast; Working Voltage: Only 5V ).
Application: Lcd Module Is Applied To Display Letters, Characters, Numbers, Real Time Clock And Temperature.
Default Address: 0 X 27 For Pcf8574t Chip; 0 X 3F For Pcf8574at Chip; Please Kindly Check The Chip Of The I2c Interface; ( Please Remember To Download The I2c Library On Github Before Uploading The Code To The Control Board).
Features
- Components: blue LCD display with i2c serial interface backpack; LCD screen can display 2-lines x 16-characters; The i2c LCD adapter built-in industry standard equivalent LCD controller
- Default Address: 0 x 27 for PCF8574T chip; 0 x 3F for PCF8574AT chip; Please kindly check the chip of the i2c interface; ( Please remember to download the I2C library on GitHub before uploading the code to the control board)
- Compatibility: 1602 icd display with I2C serial interface is compatible with for Arduino and Raspberry pi; Working voltage: 5V; To come with a potentiometer, which is applied to adjust backlight and contrast; How to wire: GND GND; VCC VCC; SDA A4; SCL A5
- Application: LCD module is applied to display letters, characters, numbers, real time clock and temperature
- Display function: 1602 icd display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on; (A potentiometer is also necessary to adjust the contrast; Working Voltage: Only 5V )
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #10
waveshare General 2inch IPS LCD Display Module 240 320 Resolution 2.0inch Monitor Embedded Controller RGB, 262K Color Display Color LED Backlight ST7789 Driver SPI Interface
Asin: B082GFTZQD | Model: 2inch IPS LCD Display Module | PartNumber: 2inch IPS LCD Display Module | Ean: 0778365986887 | UPC: 778365986887
Display Color: Rgb, 262K Color.Backlight: Led.
Display Size: 30.60（H）X 40.80（V）Mm. Pixel Size: 0.0975（H）X 0.0975（V）Mm. Dimension: 58 X 35 (Mm)..
Interface: Spi. Lcd Type: Ips. Driver: St7789v. Resolution: 240(V) X 320 (H) Rgb..
Operating Voltage: 3.3V/5V (Please Ensure That The Power Supply Voltage And Logic Voltage Are Consistent, Otherwise It Will Not Work Properly)..
Features
- 2inch LCD Display Module, IPS Screen, 240 320 Resolution, SPI Interface,requires minimum GPIO for controlling.
- Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly).
- Display color: RGB, 262K color.Backlight: LED
- Interface: SPI. LCD type: IPS. Driver: ST7789V. Resolution: 240(V) x 320 (H) RGB.
- Display size: 30.60 H x 40.80 V mm. Pixel size: 0.0975 H x 0.0975 V mm. Dimension: 58 x 35 (mm).
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #11
BIGTREETECH Upgrade PI TFT50 V2.1 TFT LCD Display DSI 800x480 for Raspberry Pi 4 3 2 Model B RPi 1 B B+ A A+ 3D Printer Controller (5in Capacitive Touch Screen)
Asin: B08FD2YZ23 | Model: ZZB000417 | PartNumber: ZZB000417 | Ean: 0779303890068 | UPC: 779303890068
❤ 【5-Point Touch】 It Supports Raspberry Pi Dsi Display Interface, Comes With A Capacitive Touch Panel, And Supports 5-Point Touch.Capacitive Touch Control ,Better Touch Response,Faster Response Time..
❤【12 Months Warranty】Thank You Very Much For Your Choice And Trust. If You Have Any Questions About The Product, Can You Contact Us First? Give Us The Opportunity To Understand Your Needs, And We Will Do Our Best To Answer Questions And Solve Problems For You..
❤ 【Easy To Install】The Unique Hole Design On The Back Allows You To Install The Raspberry Pi Directly.The Display Adopts Raspberry Pi Power Supply Design, Without External Power Supply..
❤【High Resolution】This 5 Inch Lcd Touch Screen With A Resolution Of 800*480 And A Display Area Of 108X64.8Mm..
Features
- Wide range of applications 5 inch capacitive Touch Screen designed for for pi 4 model B /pi 3 model A+ B+ B/pi 2 model B/pi 1 model B+ A+.
- High resolution This 5 inch LCD touch screen with a resolution of 800*480 and a display area of 108x64.8mm.
- 5-point touch It Supports Raspberry Pi DSI display interface, comes with a capacitive touch panel, and supports 5-point touch.Capacitive Touch Control ,better touch response,faster response time.
- Easy to install The unique hole design on the back allows you to install the Raspberry Pi directly.The display adopts Raspberry Pi power supply design, without external power supply.
- 12 MONTHS WARRANTY Thank you very much for your choice and trust. If you have any questions about the product, can you contact us first? Give us the opportunity to understand your needs, and we will do our best to answer questions and solve problems for you.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon #12
Waveshare 2.4inch LCD Display Module with 65K RGB Colors 240 320 Resolution SPI Interface
Asin: B08H24H7KX | Model: 2.4inch LCD Module | PartNumber: 2.4inch LCD Module | Ean: 0614961958579 | UPC: 614961958579
Spi Interface, Minimizes Required Io Pins, Supports Controller Boards Like Raspberry Pi//Stm32.
Comes With Development Resources (Examples For Raspberry Pi//Stm32).
240×320 Resolution, 65K Rgb Colors, Clear And Colorful Displaying Effect.
Features
- 2.4" LCD DISPLAY MODULE Embedded ILI9341 Driver, Using SPI Bus
- 240 320 resolution, 65K RGB colors, clear and colorful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi//STM32
- Comes with development resources (examples for Raspberry Pi//STM32)
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.07 Pounds
See On Amazon #13
DIYmalls 3.5" inch TFT LCD Display Module ILI9486 Resistive Touchscreen 5V/3.3V 480x320 8-bit Parallel Interface w/SD Card Slot for Arduino U NO Mega-2560
Asin: B0BFDYCX94
-The 3.5 Inch Touchscreen Can Be Directly Plug Into U No And 2560..
-You Can Find More Lcd Display Via "Visit The Diymalls Store".
-You Will Receive 1Pcs 3.5 Inch Display Module, Other Accessories Excluded..
-On-Board 5V/3.3V Level Shifting Ic, Compatible With 5V/3.3V Development Board..
Features
- -This 3.5 inch tft lcd shield is resistive touch, not capacitive touch, so you need to touch it via a pen( NOT included).
- -On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V development board.
- -The 3.5 inch touchscreen can be directly plug into u no and 2560.
- -You will receive 1pcs 3.5 inch display module, other accessories excluded.
- -You can find more lcd display via Visit the DIYmalls Store
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #14
HiLetgo 2pcs HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino
Asin: B07W5KC65S | Model: 3-01-1498 | PartNumber: 3-01-1498
Operate Voltage: 5V.
Blue Backlight Lcd Module.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #15
HiLetgo 2.2 Inch ILI9341 SPI TFT LCD Display 240x320 ILI9341 LCD Screen with SD Card Slot for Arduino Raspberry Pi 51/AVR/STM32/ARM/PIC
Asin: B01CZL6QIQ | Model: 3-01-0191-AU-1PC | PartNumber: 3-01-0191-AU-1PC
Support Serial Spi Mode, Interface 4-Wire Spi, Need 4 Ios From Your Mcu Only.
5V Compatible, Use With 3.3V Or 5V Logic.
Support A Variety Of Microcontroller Io Connection, Professional And Practical.
2.4 Inch Tft Lcd Shield Without Touch Panel, Fast To Operate.
Features
- Durable hard PCB board and SD card socket, ideal for 5110 interface
- 2.4 inch TFT LCD shield without touch panel, fast to operate
- Support Serial SPI Mode, Interface 4-Wire SPI, Need 4 IOs from your MCU only
- Support a variety of microcontroller IO connection, professional and practical
- 5V compatible, use with 3.3V or 5V logic
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
HiLetgo 2.4" SPI TFT LCD Display 2.4 Inch ILI9341 Touch Panel LCD ILI9341 240x320 5V 3.3V
Asin: B07WNLNRDN
Display Area:36.72(W)X48.96(H)Mm.
Driver Ic: Ili9341.
Driver Element: A-Si Tft Active Matrix.
Size:2.4" Spi Serial.
Features
- Type: without touch panel
- Size:2.4 SPI Serial
- Display area:36.72(W)X48.96(H)mm
- Driver element: a-Si TFT active matrix
- Driver IC: ILI9341
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.59 x 3.07 x 0.00 inches
See On Amazon #17
BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer
Asin: B08181YY8D
❤【More Extension Ports Is Reserved】Tft35 E3 V3.0.1 Display R Eserve The Extension Port Of Filament Breaking Detection,Automatic Shutdown After Printing,Also Wifi Function Can Be Realized By External Wifi Module Through Wifi Port..
❤【Quality Warranty 】Tft35 E3 V3.0.1 Touch Screen Is Designed And Produced By Bigtreetech Team,Any Questions And Feedback About That Please Free To Tell Us, We Have Professional Technical Team To Support You.
❤【Firmware Update】 Tft35 E3 V3.0.1 Is Easy And Convenient To Update Firmware By Sd Card,Download From Our Github, Copy And Save It To Sd Card.Firmware Must Bed Reserved ,Then Re-Plug The Sd Card And Wait To 10S.The Firmware Has Been Successfully Updated..
❤【Two Working Modes】Tft35 E3 V3.0.1 Touch Screen Support Uart Serial Port Screen Mode (Touch Screen Mode) And 12864 Screen Mode, It Can Replace Original Display Of Ender 3 3D Printer. You Can Enjoy Two Printing Modes: Sd Card And U Disk..
Features
- Touch Screen for Ender 3 Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- Two Working Modes TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk.
- More Extension Ports is Reserved TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
- Firmware Update TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
- Quality Warranty TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any questions and feedback about that please free to tell us, we have professional technical team to support you
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #18
DSD TECH 1.8 Inch TFT LCD Display Module with SPI Interface for Arduino and MCU
Asin: B07WDJ3TV6 | Ean: 0734678383188 | UPC: 734678383188
Support 16Bit Rgb 65K Color Display, 128X160 Resolution, St7735s Driver Chip, Working Voltage Is 5V/3.3V, Weight Is 15G.
Dsd Tech Offer A One-Year Warranty And Lifetime Technical Support For This Module. If You Have Any Questions, Please Feel Free To Contact Us! We Will Respond To You Within 24 Hours..
Dsd Tech Provides Sample Code For The Arduino For This Tft Lcd. With The Sample Code, You Can Use This Lcd Screen In 10 Minutes..
The Tft Lcd Display Can Be Directly Inserted Into Arduino, Which Is Convenient And Quick. Using Spi Communication Mode, Only 4 Ios Are Needed To Illuminate The Display, And The Sd Card Slot Is Convenient For Function Expansion..
Features
- This is a 1.8 inch color screen that can display fullcolors, suitable for electronic enthusiasts and students to use in development boards such as arduino and raspberry pi.
- The TFT LCD display can be directly inserted into arduino, which is convenient and quick. Using SPI communication mode, only 4 IOs are needed to illuminate the display, and the SD card slot is convenient for function expansion.
- Support 16BIT RGB 65K color display, 128X160 resolution, ST7735s driver chip, working voltage is 5V/3.3V, weight is 15g
- DSD TECH provides sample code for the Arduino for this TFT LCD. With the sample code, you can use this LCD screen in 10 minutes.
- DSD TECH offer a one-year warranty and lifetime technical support for this Module. If you have any questions, please feel free to contact us! We will respond to you within 24 hours.
- See more on Amazon...
Brand: DSD TECH | Manufacturer: DSD TECH
Dimensions: 0.98 x 2.76 x 1.57 inches | Weight: 0.03 Pounds
See On Amazon #19
DWEII 2PACK 1.8 Inch Serial SPI TFT LCD Module Display PCB Adapter IC 128x160 Dot Matrix 3.3V 5V IO Inerface Cmmpatible LCD1602 for Arduino
Asin: B0CTLPQBRW | Ean: 0687117727015 | UPC: 687117727015
❃❃Built In 8 Pin Port: This 1.8 Inch Lcd Screen Display Module Has A Built In 8 Pin Port And Is Suitable For Most Replacement Displays..
❃❃Equipped With St7735 Controller Chip And Support 3.3V Power Supply..
❃❃No Backlight Needed, The Display Unit Can Emit Light..
❃❃ 1.8Inch Full Color Tft Lcd Display Screen With 128X160 Resolution.
Features
- Midzoo Mini 1.8 Inch 128x160 Serial SPI TFT LCD Module Display with PCB Adapter IC Dot Matrix 3.3V 5V IO Inerface
- 1.8inch full color TFT LCD display screen with 128X160 resolution
- Built In 8 Pin Port: This 1.8 inch LCD screen display module has a built in 8 pin port and is suitable for most replacement displays.
- No backlight needed, the display unit can emit light.
- Equipped with ST7735 controller chip and support 3.3V power supply.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #20
Treedix 3.5 inch TFT LCD Display 320 x 480 Color Screen Module Compatible with Arduino UNO R3 Mega2560
Asin: B0872S57HG | Model: TRX2-0049 | PartNumber: TRX2-0049 | Ean: 0765756504621 | UPC: 765756504621
The Module Display Area Contains 320X 480Pixels..
Compatible With Arduino Uno R3 Mega2560 Due..
This Product Accords With Rohs Environmental Criterion..
Composed Of A Color Tft-Lcd Panel, Driver Ic, Fpc And A Back Light Unit..
Features
- Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
- Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit.
- The module display area contains 320x 480pixels.
- This product accords with RoHS environmental criterion.
- Compatible with Arduino UNO R3 Mega2560 DUE.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
See On Amazon
Looking For Something Else?
Search