Teyleten Robot 0.96 inch LCD OLED Display Board Module 12864 128X64 IIC I2C SSD1306 Driver 4 Pins for Raspberry Pi Arduino(5pcs, White Light)
Asin: B0CN373JF4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Pin Definition: Vcc,Gnd,Scl, Sda.
Ultra-Low Power Consumption: Full Screen Lit 0.08W.
Voltage: 3V ~ 5V Dc.
There Is Also A Removable Transparent Film On Each Oled Glass Surface For Scratch Resistant Protection Until Use..
Features
- Pins has been soldered,comes in a small box to prevent it from being dropped during transportation
- There is also a removable transparent film on each OLED glass surface for scratch resistant protection until use.
- Pin Definition: VCC,GND,SCL, SDA
- Voltage: 3V ~ 5V DC
- Ultra-low power consumption: full screen lit 0.08W
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon Similar To Teyleten Robot 0.96 inch LCD
#1
Hosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi(Blue and Yellow)
Asin: B09C5K91H7 | Ean: 0761344888470 | UPC: 761344888470
It Compatibles With R3 Board And Mega, Raspberry Pi, 51 Mcu, Stim 32, Etc..
There Are No Fonts Embedded In The Oled Controller, Users Can Create Fonts Through Font Generation Software..
No Backlight Is Required, And The Display Unit Can Be Self-Luminous. It Has Ultra-High Contrast, Bright And Clear Dots, And It Is Easy To Read Even Small Fonts.
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
Features
- 0.96 inch,Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 0.11 x 1.09 x 1.07 inches | Weight: 0.09 pounds
Warranty: NO
See On Amazon #2
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico
Asin: B072Q2X2LL | Model: U602602 | PartNumber: U602602
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software. We Offer Technical Support And Software Library As Well As The Guide Book In The Package. Note: The Display Part Is 15Mm±0.5 Tall..
Need More Than 1 Pc? Please Refer To Asin: B08ky21sr2 (2Pcs).
Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.
Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc, Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W.
Features
- UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
- Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package. Note: the display part is 15mm 0.5 tall.
- Need more than 1 pc? Please refer to Asin: B08KY21SR2 (2pcs)
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.00 Pounds
See On Amazon #3
Hosyond 3pcs IIC I2C 2004 LCD Module 20x04 LCD Screen Module Display for Arduino Raspberry Pi
Asin: B0C1G9GBRZ | Ean: 0732214748156 | UPC: 732214748156
Power Supply: 5V; I2c Address: 0X27; Wiring Method: Gnd—Gnd, Vcc—Vcc, Sda—A4, Scl—A5..
Widely Used In: Internet Of Things, School Electronics Projects, Smart Buildings, Maker Diy Projects, Etc., Can Display Letters, Characters, Numbers, Real-Time Clock Or Temperature..
Built-In Independent Potentiometer, Backlight Can Be Adjusted Through The Back Potentiometer..
Compatible With Most Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32, Etc..
Features
- 2004 LCD screen can display 4 lines x 20 characters, with i2c serial interface, blue display.
- Compatible with most development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32, etc.
- Power supply: 5v; I2C address: 0x27; wiring method: GND GND, VCC VCC, SDA A4, SCL A5.
- Built-in independent potentiometer, backlight can be adjusted through the back potentiometer.
- Widely used in: Internet of Things, school electronics projects, smart buildings, maker DIY projects, etc., can display letters, characters, numbers, real-time clock or temperature.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.50 pounds
Warranty: NO
See On Amazon #4
GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things
Asin: B07S7PJYM6 | Ean: 0703501205768 | UPC: 703501205768
Compatible With All Current Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32 And So On.
With A Potentiometer Used To Adjust Backlight (Color: Blue) And Contrast.Power Supply: 5V And I2c Address Is: 0X27 Module Dimension: 80Mm X 35Mm X 11Mm.
Commonly Used In: Internet Of Things, Diy Project, Home Animation, Smartbuilding, Maker's Diy Project..
Features
- Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
- Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.
- Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on
- With a potentiometer used to adjust backlight (Color: Blue) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Dimensions: 0.28 x 3.15 x 1.22 inches
See On Amazon #5
SunFounder IIC I2C TWI 1602 Serial LCD Module Display Compatible with Arduino R3 Mega 2560 16x2
Asin: B019K5X53O | Model: TS0351 | PartNumber: TS0351 | Ean: 0701715367685 | UPC: 701715367685
With A Potentiometer Used To Adjust Backlight And Contrast..
Address Of The Module: Ox27..
Power Supply: +5V.
Support Iic Protocol. The I2c Lcd1602 Library Is Provided, So You Can Call It Directly..
Features
- Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line).
- Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly.
- With a potentiometer used to adjust backlight and contrast.
- Power supply: +5V
- Address of the module: ox27.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.40 x 4.90 x 1.70 inches
Warranty: 1 Year Warranty
See On Amazon #6
GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Yellow Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things
Asin: B0BCWFB5P3
Compatible With All Current Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32 And So On.
Wiki:Http://Wiki.52Pi.Com/Index.Php?Title=1602_Serial_Lcd_Module_Display_Sku:Z-0234.
With A Potentiometer Used To Adjust Backlight (Color: Yellow) And Contrast.Power Supply: 5V And I2c Address Is: 0X27 Module Dimension: 80Mm X 35Mm X 11Mm.
Commonly Used In: Internet Of Things, Diy Project, Home Animation, Smartbuilding, Maker's Diy Project..
Features
- Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
- Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.
- Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on
- With a potentiometer used to adjust backlight (Color: Yellow) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm
- Wiki:http://wiki.52pi.com/index.php?title=1602_Serial_LCD_Module_Display_SKU:Z-0234
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Warranty: no
See On Amazon #7
Weewooday 5 Pieces 0.96 Inch OLED Module 12864 128x64 Driver IIC I2C Serial Self-Luminous Display Board Compatible with Arduino/Raspberry PI White
Asin: B09JWN8K99
Embedded Driver Ic: Communication: I2c/Iic Interface, Only Need 2 I/O Ports; Compatible With Mmdvm, Pi-Star, And It Is Compatible With Raspberry Pi.
About Fonts: No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software.
Self-Luminous Design: Needn't Backlight, The Display Can Self-Luminous; It Has High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.
Functional Usages: 0.96 Inch Oled Module For Showing Graphical And Textual Information Directly On Your Micro-Controller Projects; It Supports Many Chips: Compatible With Arduino Mega, Raspberry Pi, 51 Mcu, Stim 32, Etc.
Features
- Information: 128 x 64; View angle: more than 160 degree; Support voltage: 3.3V-5V DC; Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Functional usages: 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects; It supports many chips: compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc
- Embedded driver IC: Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star, and it is compatible with Raspberry pi
- Self-luminous design: needn't backlight, the display can self-luminous; It has high contrast, bright and crisp dots, even tiny fonts quite readable
- About fonts: no embedded fonts inside the OLED controller, user can create the fonts through the font generation software
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
Warranty: The brands or models we mentioned are only for expressing products adaptability explanation, not for trade mark using, our trade mark is Weewooday, kindly noted.
See On Amazon #8
Weewooday 8 Pieces IIC/ I2C/ TWI LCD Serial Interface Adapter and LCD Module Display Backlight Compatible with Arduino R3 MEGA2560 (Blue,LCD 1602 16 x 2)
Asin: B08MPTND1V | Model: Weewooday-3275 | PartNumber: Weewooday-3275
Compatibility: 1602 Icd Display With I2c Serial Interface Is Compatible With For Arduino And Raspberry Pi; Working Voltage: 5V; To Come With A Potentiometer, Which Is Applied To Adjust Backlight And Contrast; How To Wire: Gnd—Gnd; Vcc—Vcc; Sda—A4; Scl—A5.
Display Function: 1602 Icd Display With I2c Serial Interface Can Be Applied To Display Real Time Clock, Temperature, Humidity And So On; (A Potentiometer Is Also Necessary To Adjust The Contrast; Working Voltage: Only 5V ).
Application: Lcd Module Is Applied To Display Letters, Characters, Numbers, Real Time Clock And Temperature.
Default Address: 0 X 27 For Pcf8574t Chip; 0 X 3F For Pcf8574at Chip; Please Kindly Check The Chip Of The I2c Interface; ( Please Remember To Download The I2c Library On Github Before Uploading The Code To The Control Board).
Features
- Components: blue LCD display with i2c serial interface backpack; LCD screen can display 2-lines x 16-characters; The i2c LCD adapter built-in industry standard equivalent LCD controller
- Default Address: 0 x 27 for PCF8574T chip; 0 x 3F for PCF8574AT chip; Please kindly check the chip of the i2c interface; ( Please remember to download the I2C library on GitHub before uploading the code to the control board)
- Compatibility: 1602 icd display with I2C serial interface is compatible with for Arduino and Raspberry pi; Working voltage: 5V; To come with a potentiometer, which is applied to adjust backlight and contrast; How to wire: GND GND; VCC VCC; SDA A4; SCL A5
- Application: LCD module is applied to display letters, characters, numbers, real time clock and temperature
- Display function: 1602 icd display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on; (A potentiometer is also necessary to adjust the contrast; Working Voltage: Only 5V )
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #9
GeeekPi IIC I2C TWI Serial LCD 2004 20x4 Display Module with I2C Interface Adapter Blue Backlight for Raspberry Pi Arduino STM32 DIY Maker Project BPI Tinker Board Electrical IoT Internet of Things
Asin: B07QLRD3TM | Ean: 0703501205959 | UPC: 703501205959
It Is A High-Performance Serial Bus With Bus Rules And High-Speed Or Low-Speed Device Synchronization Required For Multi-Master Systems. The I2c Bus Has Only Two Bidirectional Signal Lines, A Serial Data Line (Sda) And A Serial Clock Line (Scl)..
Package Includes:1 X Lcd2004,1 X Jumpwire.
Compatible With All Devices With I2c Interfaces, Such As Arduino, Raspberry Pi, Beagle Bone Black, Tinker Board, Stm32, Esp32 And More..
The Common Lcd1602, Lcd2004, And Lcd12864 Are Fabricated Using Liquid Crystal Materials And Communicated Using The I2c Bus..
Features
- The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures.
- The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus.
- It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL).
- Compatible with all devices with I2C interfaces, such as Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more.
- Package Includes:1 x LCD2004,1 x Jumpwire
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Dimensions: 0.39 x 3.86 x 2.36 inches
See On Amazon #10
GeeekPi 2Pcs OLED Display Module I2C IIC 128X64 Pixel 0.96 Inch Display Module Yellow Blue Two-Color Display Compatible with Raspberry Pi Arduino 51 Series MCU STM32 R3 and Mega
Asin: B0B7RPCZ4Z
Support I2c Iic Communication Protocol,The Iic Address Can Be Changed,It Is Convenient To Use With Different Machines ..
Package Includes:2 X 0.96 Inch Oled Display Kits (Yellow Blue Two-Color), 8X Male To Femal Dupont Wire, 8X Female To Female Dupont Wire.
Pin Definitions: Gnd, Vcc, Scl, Sda;Pins: 4 Pins.
High Resoluton: 128*64 Pixels(Approx).
Features
- Fully compatible with Raspberry Pi, Arduino, 51 series, MSP430 Series, STM32/2, CSR IC, etc.
- High resoluton: 128*64 pixels(approx)
- Support I2c IIC communication Protocol,the IIC address can be changed,it is convenient to use with different machines .
- Pin Definitions: GND, VCC, SCL, SDA;Pins: 4 pins
- Package includes:2 x 0.96 inch OLED Display kits (Yellow Blue Two-Color), 8x Male to Femal Dupont Wire, 8x Female to Female Dupont Wire
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Weight: 0.07 Pounds
Warranty: no
See On Amazon #11
HiLetgo 1.3" IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD Module for Arduino AVR PIC STM32
Asin: B01MRR4LVE | Model: 3-01-1261 | PartNumber: 3-01-1261
Ultra-Low Power Consumption: Full Screen Lit 0.08W.
Supports Many Control Chip : Fully Compatible With Arduino 51 Series,Msp430 Series , Stm32/2 Csr Ic Etc.
The Iic Address Can Be Changed,It Is Convenient To Use With Different Machines.
Four Square Holes Are Easy To Install.
Features
- Driver IC: SSH1106.Resolution: 128*64
- Four square holes are easy to install
- Ultra-low power consumption: full screen lit 0.08w
- The IIC address can be changed,it is convenient to use with different machines
- Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC etc
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo®
See On Amazon #12
Dorhea 0.96 inch OLED i2c Display Module IIC Serial LCD Screen 0.96" LED Module Display Yellow Blue 12864 OLED /3.3V-5V 128 X 64 Compatible with Nano Display Raspberry Pi 51 Msp420 Stim32 SCR
Asin: B07FK8GB8T | Model: 15628-0.96 | PartNumber: 15628-0.96 | Ean: 0701715553675 | UPC: 701715553675
0.96 Inch Oled Module For Showing Graphical & Textual Information Directly On Your Micro-Controller Projects. It Compatible With Raspberry Pi, 51 Mcu, Stim 32.
Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software.
Low-Power, Very Legible And Vibrant, A Crisp Screen, Pixels Stand Out Very Well Even In A Brighter Circumstances Like Full Sunlight.
The Iic Address Can Be Changed,It Is Convenient To Use With Different Machines Four Square Holes Are Easy To Install.
Features
- This i2c display module is 0.96 inch diagonal,Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W,Color:Yellow Blue
- The IIC address can be changed,it is convenient to use with different machines Four square holes are easy to install
- 0.96 Inch OLED module for showing graphical & textual information directly on your micro-controller projects. It compatible with Raspberry pi, 51 MCU, STIM 32
- Low-power, very legible and vibrant, a crisp screen, pixels stand out very well even in a brighter circumstances like full sunlight
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #13
Teyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Asin: B09LND6QJ1 | Ean: 9339036069134
Spi Communication Or I2c Communication Can Be Switched By Configuring Three Resistors R3 R4 R5.
For Iic Communication, It Is Necessary To Move The Resistor On R4 To R3, And R5 Is Soldered With 0 Ohm Resistor..
Features
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 2.80 x 1.71 inches
See On Amazon #14
GeeekPi IIC I2C TWI Serial LCD 2004 20x4 Display Module with I2C Interface Adapter Blue Backlight for Raspberry Pi Arduino STM32 DIY Maker Project BPI Tinker Board Electrical IoT Internet of Things
Asin: B086VVT4NH | Model: Z-0235-2Pack | PartNumber: Z-0235-2Pack | Ean: 0192530263922 | UPC: 192530263922
It Is A High-Performance Serial Bus With Bus Rules And High-Speed Or Low-Speed Device Synchronization Required For Multi-Master Systems. The I2c Bus Has Only Two Bidirectional Signal Lines, A Serial Data Line (Sda) And A Serial Clock Line (Scl)..
Compatible With All Devices With I2c Interfaces, Such As Arduino, Raspberry Pi, Beagle Bone Black, Tinker Board, Stm32, Esp32 And More..
The Common Lcd1602, Lcd2004, And Lcd12864 Are Fabricated Using Liquid Crystal Materials And Communicated Using The I2c Bus..
Features
- The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures.
- The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus.
- It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL).
- Compatible with all devices with I2C interfaces, such as Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more.
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
See On Amazon #15
GeeekPi 5PCS 0.96 Inch OLED Module 12864 128x64 White Driver IIC Serial Display Board Module for Arduino, Raspberry Pi,Beagle Bone Black
Asin: B0833PF7ML | Ean: 0703501202934, 0703501203115 | UPC: 703501203115, 703501202934
Changeable Iic Address:The Iic Address Can Be Changed,It Is Convenient To Use With Different Machines Four Square Holes Are Easy To Install..
Wiki:Wiki.52Pi.Com/Index.Php/0.96_Inch_Oled_Module_Sku:_S-0005 ; Https://Youtu.Be/T1n9xyrc1gq.
Package Includes: 5X 0.96 Inch Oled Modules, 20X Female To Female Dupont Wires, 20X Male To Female Dupont Wires.
128 X 64 Pixels:Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software..
Parameter:Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc, Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W,Color:White..
Features
- COMPATIBLE WITH MANY CONTROL CHIPS: Raspberry Pi 4B/3B+/3B/2B/Zero, Beagle Bone Black,Arduino UNO and Mega, 51 MCU, STIM 32 and so on. Showing graphical & textual information directly on your micro-controller projects.
- PARAMETER:Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W,Color:White.
- CHANGEABLE IIC ADDRESS:The IIC address can be changed,it is convenient to use with different machines Four square holes are easy to install.
- 128 X 64 PIXELS:Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software.
- Wiki:wiki.52pi.com/index.php/0.96_Inch_OLED_Module_SKU:_S-0005 ; https://youtu.be/T1N9XyRC1GQ
- Package Includes: 5x 0.96 inch OLED Modules, 20x Female to Female Dupont Wires, 20x Male to Female Dupont Wires
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
See On Amazon #16
MakerFocus 5pcs 0.96 Inch OLED Display Module I2C IIC Communication SSD1315 Driver 128 x 64 Pixel for Arduino UNO R3 STM32/2 Raspberry Pi (White, Soldered)
Asin: B0D2VLCL94 | Model: SBSBSBSB-HAHAH | PartNumber: SBSBSBSB-HAHAH
Changeable Iic Address: Communication Mode Is Iic, Only Two I/O Interfaces Are Required. The I2c Address Can Be Changed, It Is Convenient To Use With Different Machines.
Parameters: Driver Chip:Ssd1315; Resolution: 128*64; Colour: White; Viewing Angle: >160°; Power Consumption: 0.04W; Voltage: 3.3-5V Dc; Working Temperature: -30℃-80℃.
Application: These Iic Oled Modules Can Be Used For Raspberry Pi 5/4B/3B+/3B/2B/Zero, Beagle Bone Black, Arduino Uno And Mega, 51 Mcu, Stim 32 And So On. Showing Graphical & Textual Information Directly Of Your Machines.
No Embedded Fonts: There Are No Embedded Fonts Inside The Oled Module, Users Can Create The Fonts Through Font Generation Software.
Features
- 128 x 64 Pixel: Needn't backlight, the OLED module can self-luminous. It has super high contrast, bright and crisp dots, even tiny fonts quite readable
- No Embedded Fonts: There are no embedded fonts inside the OLED module, users can create the fonts through font generation software
- Changeable IIC Address: Communication mode is IIC, only two I/O interfaces are required. The I2C address can be changed, it is convenient to use with different machines
- Application: These IIC OLED modules can be used for raspberry Pi 5/4B/3B+/3B/2B/Zero, Beagle Bone Black, Arduino UNO and Mega, 51 MCU, STIM 32 and so on. Showing graphical & textual information directly of your machines
- Parameters: Driver Chip:SSD1315; Resolution: 128*64; Colour: White; Viewing Angle: >160 ; Power Consumption: 0.04W; Voltage: 3.3-5V DC; Working Temperature: -30 -80
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Warranty: No Warranty
See On Amazon #17
Teyleten Robot LCD1602 LCD Display Screen Module 16X2 Character Serial Blue Backlight LCD Module PCF8574T PCF8574 IIC I2C for Raspberry Pi Arduino STM32 DIY (5PCS)
Asin: B07T8ZG5D1 | Model: LCD module | PartNumber: LCD module | Ean: 0778862434744 | UPC: 778862434744
Built-In Industry Standard Hd44780 Equivalent Lcd Controller..
Commonly Used In: Copiers, Fax Machines, Laser Printers, Industrial Test Equipment, Networking Equipment Such As Routers And.
Can Display 2-Lines X 16-Characters..
Voltage: 5V Dc..
Lcm Type: Characters.
Wide Viewing Angle And High Contrast..
Features
- LCD display module with blue blacklight.
- Wide viewing angle and high contrast.
- Built-in industry standard HD44780 equivalent LCD controller.
- LCM type: Characters
- Can display 2-lines X 16-characters.
- Voltage: 5V DC.
- Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.00 x 0.00 x 0.00 inches
Warranty: no
See On Amazon #18
AITRIP 10 Pieces 0.96 Inch OLED I2C IIC Display Module 12864 128x64 SSD1306 Mini Self-Luminous Display Board Compatible with Arduino/Raspberry PI -White
Asin: B0CT5CJWFK | Ean: 0687117728838 | UPC: 687117728838
128 X 64 Pixels:Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software..
Applications: Mp3, Mp4, Watch；Head-Mounted Displays；Meters And Other Intelligent Instruments；It Is Compatible With Arduino Mega, Raspberry Pi, 51 Mcu, Stim 32, Etc.
Embedded Driver Ic: Communication: I2c/Iic Interface, Only Need 2 I/O Ports; Compatible With Mmdvm, Pi-Star； Instructions : Https://Wiki.52Pi.Com/Index.Php?Title=S-0005.
0.96 Inch,Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc；Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W.
Features
- 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC Power consumption: 0.04W during normal operation, full screen lit 0.08W
- 128 X 64 PIXELS:Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software.
- Embedded driver IC: Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star Instructions : https://wiki.52pi.com/index.php?title=S-0005
- Applications: MP3, MP4, watch Head-mounted displays Meters and other intelligent instruments IT is compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #19
AITRIP 10 PCS 0.96 inch 12864 128X64 OLED LCD Display Board Module I2C IIC SSD1306 Driver 4 Pins Compatibile with Arduino Raspberry Pi (Blue and Yellow)
Asin: B0B7RP2CVT | Ean: 0701715523425 | UPC: 701715523425
0.96 Inch,Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc, Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W.
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
It Compatibles With R3 Board And Mega, Raspberry Pi, 51 Mcu, Stim 32, Etc..
Working Voltage: 3.3V - 5V; Size:0.96 Inch.
Features
- Using only four pins, display offers an easy connection to Compatibile with Raspberry Pi etc via the I2C interface.
- Working voltage: 3.3V - 5V; Size:0.96 inch
- 0.96 inch,Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon
Looking For Something Else?
Search