Epindon Hall Effect Replacement Stick Module for Astro C40 TR Controller (80G)
Asin: B0CN8D7FHV | Model: EP-HE01 | PartNumber: EP-HE01 | Ean: 0767791222805 | UPC: 767791222805
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easily Installation. Replace By Epindon Hand-Made Stick Module With Attached T6 Screwdriver For About 5 Minutes..
If Any Questions Or Concerns , Please Contact: Support@Epindon.Com..
Note:After Installation, It Must Be Reset. (Reset Method: Press And Hold The Reset Button To Vibrate, Then Press And Hold It Again In 30 Seconds And Vibrate To Complete The Reset.).
Hall Effect Sensor Sticks:Revolutionary Electromagnetic Stick Module Solves The Drifting Problem, And Increasing The Durability..
Features
- A hand-made hall effect stick module for astro c40 tr controller by Epidnon,and a T6 screwdriver was included.
- Hall Effect Sensor Sticks:revolutionary electromagnetic stick module solves the drifting problem, and increasing the durability.
- Easily installation. Replace by Epindon hand-made stick module with attached T6 screwdriver for about 5 minutes.
- NOTE:After installation, it must be reset. (Reset method: Press and hold the reset button to vibrate, then press and hold it again in 30 seconds and vibrate to complete the reset.)
- If any questions or concerns , Please contact: support@epindon.com.
- See more on Amazon...
Brand: Epindon | Manufacturer: Epindon
Dimensions: 0.83 x 1.14 x 1.14 Inches
See On Amazon Similar To Epindon Hall Effect Replacement Stick
#1
Epindon Hall Effect Replacement Stick Module Compatible with Victrix Pro BFG Wireless Controller - Left Stick(80G)
Asin: B0CNZ79LTQ | Ean: 0767791812563 | UPC: 767791812563
Improve Module Issues Such As Drift By Replacing Existing Module On The L Stick..
Calibration Is Required After Installation. Calibration Method: Press The L( R )Stick And Function Button At The Same Time, The Function Button Led Will Flash. At That Time, Turn The L(/ R) Stick Left (Counterclockwise) And Right (Clockwise) 3 Times Each. Then Press The Function Button Again, The White Led Will Turns Off To Complete The Module Calibration..
Easily Installation. Unscrew The Screws Of Faceplate And Stick Module Pcb Board With Attached T2.0 Driver; Replace The Stock Module With Epindon Customized Hall Effect Electromagnetic Module.【Attention : 】Please Insert And Remove Connector Pins Of Left Stick Module Slowly..
No Drift Hall Effect Sensor Sticks:Revolutionary Electromagnetic Stick Module Solves The Drifting Problem, And Increasing The Precision And Durability..
Features
- A hand-made personalized stick module compatible with Victrix Pro BFG controller by Epidnon, and a T2.0 screwdriver was included.
- No Drift Hall Effect Sensor Sticks:Revolutionary electromagnetic stick module solves the drifting problem, and increasing the precision and durability.
- Improve module issues such as drift by replacing existing module on the L stick.
- Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon customized hall effect electromagnetic module. Attention : please insert and remove connector pins of left stick module slowly.
- Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
- See more on Amazon...
Brand: Epindon | Manufacturer: Epindon
Dimensions: 0.83 x 2.20 x 0.94 inches
See On Amazon #2
Epindon Hall Effect Replacement Stick Module Compatible with Victrix Pro BFG Wireless Controller (Both PS5 and XBOX Version) - Right Stick(80G)
Asin: B0CN8H14N5 | Ean: 0767791222812 | UPC: 767791222812
Improve Module Issues Such As Drift By Replacing Existing Module On The R Stick..
Calibration Is Required After Installation. Calibration Method: Press The L( R )Stick And Function Button At The Same Time, The Function Button Led Will Flash. At That Time, Turn The L(/ R) Stick Left (Counterclockwise) And Right (Clockwise) 3 Times Each. Then Press The Function Button Again, The White Led Will Turns Off To Complete The Module Calibration..
Easily Installation. Unscrew The Screws Of Faceplate And Stick Module Pcb Board With Attached Driver; Replace The Stock Module With Epindon Customized Hall Effect Electromagnetic Stick Module..
Revolutionary Electromagnetic Stick Module Solves The Drifting Problem, And Increasing The Precision And Durability-No Drift Hall Effect Sensor Sticks:.
Features
- A hand-made hall effect stick module compatible with Victrix Pro BFG controller (Both PS5 and XBOX Version) by Epidnon,and a T2.0 screwdriver was included.
- Revolutionary electromagnetic stick module solves the drifting problem, and increasing the precision and durability-No Drift Hall Effect Sensor Sticks:
- Improve module issues such as drift by replacing existing module on the R stick.
- Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached driver; replace the stock module with Epindon customized hall effect electromagnetic stick module.
- Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
- See more on Amazon...
Brand: Epindon | Manufacturer: Epindon
Dimensions: 0.83 x 2.20 x 0.94 inches
See On Amazon #3
Epindon Replacement Stick Module Compatible with Victrix Pro BFG Wireless Controller (Both PS5 and XBOX Version) - Right Stick (FPS Tension 170G)
Asin: B0CNZ93LCL | Ean: 0767791223352 | UPC: 767791223352
Improve Module Issues Such As Drift By Replacing Existing Module On The R Stick..
Calibration Is Required After Installation. Calibration Method: Press The L( R )Stick And Function Button At The Same Time, The Function Button Led Will Flash. At That Time, Turn The L(/ R) Stick Left (Counterclockwise) And Right (Clockwise) 3 Times Each. Then Press The Function Button Again, The White Led Will Turns Off To Complete The Module Calibration..
Easily Installation. Replaced By Epindon Hand-Made Fps Tension Module With Attached T2.0 Screwdriver For About 5 Minutes..
The Customized Module Increases The Tension Of Right Stick (About 170G), It Is Ideal For Aiming Of Fps /Tps Games Such As Cod, Apex Legends, Fortnite..
Features
- A hand-made stick personalized module compatible with Victrix Pro BFG controller by Epidnon, and a t2.0 screwdriver was included.
- The customized module increases the tension of right stick (about 170G), it is ideal for aiming of FPS /TPS games such as COD, Apex Legends, Fortnite.
- Improve module issues such as drift by replacing existing module on the R stick.
- Easily installation. Replaced by Epindon hand-made FPS tension module with attached T2.0 screwdriver for about 5 minutes.
- Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
- See more on Amazon...
Brand: Epindon | Manufacturer: Epindon
Dimensions: 0.83 x 2.20 x 0.94 inches
See On Amazon #4
Epindon Replacement Stick Module Compatible with Victrix Pro BFG Wireless Controller(Both PS5 and XBOX Version)-Left Stick (110G)
Asin: B0CNZ8B5BY | Ean: 0767791812570 | UPC: 767791812570
Replace By Epindon Hand-Made Stick Module With Attached T2.0 Screwdriver For About 5 Minutes..
Calibration Is Required After Installation. Calibration Method: Press The L( R )Stick And Function Button At The Same Time, The Function Button Led Will Flash. At That Time, Turn The L(/ R) Stick Left (Counterclockwise) And Right (Clockwise) 3 Times Each. Then Press The Function Button Again, The White Led Will Turns Off To Complete The Module Calibration..
Improve Module Issues Such As Drift By Replacing Existing Module On The Left Stick..
Features
- A hand-made stick personalized module compatible with Victrix Pro BFG controller by Epidnon, and a T2.0 screwdriver was included.
- Improve module issues such as drift by replacing existing module on the Left stick.
- Replace by Epindon hand-made stick module with attached T2.0 screwdriver for about 5 minutes.
- Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
- See more on Amazon...
Brand: Epindon | Manufacturer: Epindon
Dimensions: 0.83 x 2.20 x 0.94 Inches
See On Amazon
Looking For Something Else?
Search