Aginkgo Toy Box Hinges Lid Supporting Hinge Adjustable Weight to Maintain Softness and Tightness Suitable for Cabinets Wardrobes Or Closets
Asin: B0CNPMJD5J | Model: Toy box hinge | PartNumber: Toy box hinge
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Adjustable Weight] The Support Hinge Can Be Set With Appropriate Pressure By Rotating The Screw In The Middle Of The Arm, Thereby Fully Adjusting According To Different Weights; Adjustable Elasticity And Load-Bearing, Suitable For Different Cabinet Board Weights, Mechanical Principles, And Convenient Adjustment; Tighten Clockwise To Increase The Force, And Counterclockwise To Decrease The Force..
[Multifunctional Lid Support Hinge] These Elegant Support Hinges Are Exquisitely Crafted To Support The Lids Of Small Boxes, Such As Toy Boxes, Cabinets, Wardrobes, And Wardrobe Lids. The Elegant Body Curves Add A Classic Sense Of Luxury To Your Furniture..
[Seiko Production] Reinforced Base, Precision Die-Casting Molding, Highly Fitting And Tightly Fitting, Stable And Durable; Precision Large Shaft, Precision Shaft Disc, Built-In Nylon Wear Resistant Module, Not Easily Damaged; Thickened Arm, Thicker Arm, Stronger Bearing Capacity, And Longer Service Life..
[Arbitrary Angle Adjustment] Each Cover Bracket Can Be Used For Right-Hand Or Left-Hand Installation, Fixing The Door At Any Angle Without Sliding Or Falling. The Angle Can Be Freely Parked And Opened Towards The Door, With Adjustable Angles Of 75 °, 90 °, And 110 °. It Is Self Adjustable And Easy To Use. The Cabinet Door Caters To Your Long Arm And Can Be Parked Wherever You Lift It..
Features
- [Zinc alloy material] Made of high-quality zinc alloy, with maximum corrosion resistance and durability; The lid maintains a hinge to ensure high performance, with thickened material, adjustable elasticity, durability, and complete accessories; The surface is electroplated with nickel.
- [Arbitrary angle adjustment] Each cover bracket can be used for right-hand or left-hand installation, fixing the door at any angle without sliding or falling. The angle can be freely parked and opened towards the door, with adjustable angles of 75 , 90 , and 110 . It is self adjustable and easy to use. The cabinet door caters to your long arm and can be parked wherever you lift it.
- [Adjustable weight] The support hinge can be set with appropriate pressure by rotating the screw in the middle of the arm, thereby fully adjusting according to different weights; Adjustable elasticity and load-bearing, suitable for different cabinet board weights, mechanical principles, and convenient adjustment; Tighten clockwise to increase the force, and counterclockwise to decrease the force.
- [Seiko production] Reinforced base, precision die-casting molding, highly fitting and tightly fitting, stable and durable; Precision large shaft, precision shaft disc, built-in nylon wear resistant module, not easily damaged; Thickened arm, thicker arm, stronger bearing capacity, and longer service life.
- [Multifunctional lid support hinge] These elegant support hinges are exquisitely crafted to support the lids of small boxes, such as toy boxes, cabinets, wardrobes, and wardrobe lids. The elegant body curves add a classic sense of luxury to your furniture.
- See more on Amazon...
First Available: 01/10/2024
Brand: Aginkgo | Manufacturer: Aginkgo
Dimensions: 0.04 x 8.39 x 1.69 inches
See On Amazon Similar To Aginkgo Toy Box Hinges Lid
#1
Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty, Soft Close Hinges for Chest Toy Box, Chest Hinges Support 50lb/2pcs (APFFSY)
Asin: B092W7FTNS | Ean: 0631344780695 | UPC: 631344780695
Easy To Install【 Important：Refer To Our Install Videos ! 】 — The Lid Closer Can Be Mounted On The Left Or Right Side, Also Used For Side-Mounting And Top-Mounting. Upward Door Open Adjustable Angle Of 75°,90°,110°. It Can Fit For Most Lids And Allow You To Keep Your Lids Stay At Any Angle. Just Mark Two Drilling Holes, And Screw Each Mounting Bracket. No Need To Use The Diagram On The Package！.
Conditioned Soft Closing — Only With This Chest Hinges Supporting Less Than 50Lbs And Keeping Two Soft Close Hinges In Same Tension By Your Adjustment Will Soft Closing Function Work Perfectly!! The Safety Hinges Will Go Down Slowly, And Prevent Fingers From Getting Smashed..
Adjustable Tension — Adjust The Toy Box Hinges Soft Close Tension With Allen Wrench To Fit For Lids With Different Weight. After Installing The Lid Hinges For Wooden Box, Please Tighten The Mechanism Into Allen Wrench Hole In The Middle Of The Arms To Set Up Appropriate Pressure, Prevent Lid From Slamming Shut..
Durable Material — Heavy Lid Hinge, Max Weight Support 50Lbs/2Pcs.The Up-Grated Version Has The Advantages Of Strong Bearing Capacity,Metal Connector Instead Of Plastic Clip.Made Of Premium Quality Zinc Alloy With Maximum Corrosion Resistance And Durability The Chest Slow Close Hinges Guarantee High Performance..
Features
- KEEP LID STAY OPEN The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required.
- DURABLE MATERIAL Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance.
- EASY TO INSTALL Important Refer to our install videos ! The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75 ,90 ,110 . It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package
- ADJUSTABLE TENSION Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the lid hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut.
- CONDITIONED SOFT CLOSING Only with this chest hinges supporting less than 50lbs and keeping two soft close hinges in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly, and prevent fingers from getting smashed.
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.65 x 5.20 x 1.80 inches
See On Amazon #2
Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)
Asin: B086X64DQT | Model: MODP-145 | PartNumber: MODP-145 | Ean: 0702562332208 | UPC: 702562332208
Lid Stay Slow Closing 🌟 Lid Stay Support Built-In Hydraulic Dampening Device. Doors And Lids Will Come Down Slowly And Softly Which Eliminates Slamming Doors Or Smashed Fingers..
Keep Lid Hinge Stay Opening & Wide Usage 🌟 Updated Manual Can Be Downloaded In Amazon Page.Easy To Follow Installation Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right..
Compact Design Of Lid Stay Hinge 🌟 The Compact Design Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degree..
Easy To Install 🌟 Comes With An Exclusive Original Design Installation Card, Combined With The Most Detailed Installation Video Of The Entire Network On This Page, Allows You To Easily Complete The Hinge Installation..
Features
- STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
- EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation.
- LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
- KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
- See more on Amazon...
Brand: MORINBO | Manufacturer: MORINBO
Dimensions: 0.60 x 8.60 x 2.10 Inches
See On Amazon #3
2 Pack | Toys Box Hinges Soft Close - HBL Lid Support Hinges Chest Hinges for Wooden Toy Box, Cedar, Storage Trunk & Benches, Made of Zinc Alloy, Safety & Heavy Duty.
Asin: B0BW3CWSFD | Model: HBL1517 | PartNumber: HBL1517
Our Easy-To-Install Lid Closer Can Be Mounted On The Left Or Right Side, And Fits Most Lids With Open Angles Between 90° And 105°, Allowing You To Keep Your Lid At Any Desired Angle..
Attention: Please Refer To The Provided Image To Ensure Proper Installation And Select The Appropriate Quantity Of Lid Supports Based On The Width Of Your Lid. Our Lid Hinges Are Not Suitable For Use With Hanging Cabinets..
Our Chest Hinges Come In Pairs And Support Less Than 50Lbs, Ensuring Perfect Soft Closing And Maximum Safety For You And Your Loved Ones..
Made Of Premium Quality Zinc Alloy, Our Heavy-Duty Hinge Can Support Up To 50Lbs/2Pcs, Making It Suitable For A Variety Of Uses Including Wooden Boxes, Toy Chests, Storage Trunk & Benches..
Features
- Keep your loved ones safe with our Sturdy Lid Stay with Soft Close, designed to prevent slammed fingers and smashed toys or objects.
- Made of premium quality zinc alloy, our heavy-duty hinge can support up to 50lbs/2pcs, making it suitable for a variety of uses including wooden boxes, toy chests, storage trunk & benches.
- Our easy-to-install lid closer can be mounted on the left or right side, and fits most lids with open angles between 90 and 105 , allowing you to keep your lid at any desired angle.
- Our chest hinges come in pairs and support less than 50lbs, ensuring perfect soft closing and maximum safety for you and your loved ones.
- Attention: Please refer to the provided image to ensure proper installation and select the appropriate quantity of Lid Supports based on the width of your lid. Our lid hinges are not suitable for use with hanging cabinets.
- See more on Amazon...
Brand: HBL' | Manufacturer: 2023
Dimensions: 1.00 x 6.00 x 3.00 Inches | Weight: 0.50 pounds
See On Amazon #4
Apexstone Soft Close Toy Box Hinges Soft Close Toy Chest Hinges Slow Closing Hinges for Toy Safety Hinge Soft Close Hinge, Set of 2
Asin: B06XZRSHWB | Model: GS5959 | PartNumber: GS5959 | Ean: 0647726003863 | UPC: 647726003863
Soft Down The Door/Lid Which The Side Length Is Less Than 30 Inch, The Weight Is Less Than 33 Lbs, While If Your Toy Chest Lid Is Less Than 11 Lbs, We Sincerely Suggest You To Use Only 1 Piece Soft Close Gas Strut..
We Offer 1 Year 100% Satisfactory Warranty, If Unfortunately Our Soft Down Lid Gas Strut Did Not Work Well ,Please Kindly Contact Us For Exchange, Refund Or Return.
How To Install&Adjust It: Just Install It As The Video Or The Image Shown In The Description, While If You Still Have Problems, Please Kindly Click "Ask Seller" Besides Your Order For In-Time Assistance..
Length (Center-To-Center): 8.3 Inch, Extended Length (Center-To-Center): 14.2 Inch, Stroke Length (5.9 Inches), Each Strut Comes With 5 Screws And 2 Brackets..
Features
- Lids lower gently, Ideal for SOFT CLOSING lid to prevent from slamming so that it won't smash kid's fingers. Not lift supports!
- Length (Center-to-Center): 8.3 Inch, Extended Length (Center-to-Center): 14.2 Inch, Stroke Length (5.9 inches), Each strut comes with 5 screws and 2 brackets.
- SOFT DOWN the door/lid which the SIDE LENGTH is Less than 30 Inch, the WEIGHT is Less than 33 Lbs, while if your toy chest lid is less than 11 Lbs, we sincerely suggest you to use only 1 piece soft close gas strut.
- HOW TO INSTALL&ADJUST IT: Just install it as the video or the image shown in the description, While if you still have problems, please kindly Click Ask Seller Besides Your Order for In-time Assistance.
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT DOWN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
- See more on Amazon...
Brand: Apexstone | Manufacturer: Apexstonetek/Apexstone
Dimensions: 0.10 x 14.20 x 2.00 inches
See On Amazon #5
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs
Asin: B07FL746GJ | Ean: 0723172901332 | UPC: 723172901332
Max Weight Lid Hinge--Support 40Lbs When Use 2 Pcs Lid Stays, Lid Support Hinge Can Be Mounted On The Left Or Right Side..
Easy To Install Lid Support --The Lid Hinge Is Used For Side Mounting And Top Mounting. Only Mark Two Points For Drilling Holes, And Screw Each Mounting Bracket Into Its Respective Place. Installing Screws And Allen Wrench In Package..
Wide Application--Perfect As Toy Box Hinges, Lid Stay Support Good For Kitchen Cabinet Door Cupboard And Window Seat, Wardrobe..
Soft Close Lid Stay---Every Lid Support Can Be Adjusted In Largest 75°、90° And 100° And Used For Right Or Left Hand Mounting.
Features
- LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support.
- SOFT CLOSE LID STAY---Every Lid support can be adjusted in largest 75 90 and 100 and used for Right or Left Hand mounting
- MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
- WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
- EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.
- See more on Amazon...
Brand: RUYUFE | Manufacturer: Ryf
Dimensions: 0.15 x 8.00 x 1.00 inches
See On Amazon #6
Ravaver Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install
Asin: B08B5NWXQ1 | Model: 145 | PartNumber: 145 | Ean: 0702562332499 | UPC: 702562332499
Lid Stay Slow Closing: Lid Stay Support Built-In Hydraulic Dampening Device. Doors Will Come Down Slowly And Softly Which Eliminates Slammed Doors Or Smashed Fingers.
Keep Lid Hinge Stay Open & Wide Usage: Easy To Follow Install Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right.
Compact Design Of Lid Stay Hinge Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degrees.
Easy To Install: Comes With An Exclusive Original Design Installation Card, Combined With The Most Detailed Installation Video Of The Entire Network On This Page, Allowing You To Complete The Hinge Installation Easily.
Features
- STURDY LID STAY WITH SOFT CLOSE: Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch
- EASY TO INSTALL: Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allowing you to complete the hinge installation easily
- LID STAY SLOW CLOSING: Lid stay support built-in hydraulic dampening device. Doors will come down slowly and softly which eliminates slammed doors or smashed fingers
- COMPACT DESIGN OF LID STAY HINGE allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum angle of 105 degrees
- KEEP LID HINGE STAY OPEN & WIDE USAGE: Easy to follow install instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right
- See more on Amazon...
Brand: Ravaver | Manufacturer: Ravaver
Dimensions: 1.00 x 8.00 x 2.00 inches
See On Amazon #7
QBOSO Heavy Duty Lid Stay Hinges Folding Lid Support Hinge,Perfect for Cabinet,Closet,Wardrobe or Toybox 110 Degree (Heavy Duty Style 1 Pair)
Asin: B07KMR4BZD | Model: B07KMR4BZD | PartNumber: B07KMR4BZD | Ean: 0794604213569 | UPC: 794604213569
●Material - Made Of Premium Quality Zinc Alloy With Maximum Corrosion Resistance And Durability The Lid Stay Hinges Guarantee High Performance: Max-Weight 35 Lbs When Use 2 Pcs（Up To 17.5Lbs - 1 Lid Stay）.
●Package - 2 Pcs Lid Stays,Allen Wrench And Exclusive Redesign Installation Instruction Are Included.
●Perfect For Any Lids Or Flaps When A Soft Closing Motion Is Required ,Each Lid Stay Can Be Used For Right Or Left Hand Mounting,Holds The Door At Any Angle You Want,Upward Door Open Adjustable Angle Of 75°,90°,110°,Self Adjust,.
●Adjustable For Different Weights - With The Allen Wrench Included In The Package, The Support Hinges Are Fully Adjustable For Different Weight By Turning The Screw In The Middle Of The Arms To Set Up Appropriate Pressure So That The Lid Can Be Slided Down Gently Without Smashing Fingers..
Features
- These support hinges are well made and designed to support the lids of box, such as mini toy box, cabinet,closet,wardrobe lids, the enhanced version has the advantages of strong bearing capacity.
- Adjustable for different weights - With the Allen wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers.
- Material - Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 35 lbs when use 2 pcs up to 17.5lbs - 1 Lid Stay
- Perfect for any lids or flaps when a soft closing motion is required ,each lid stay can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75 ,90 ,110 ,self adjust,
- Package - 2 pcs lid stays,Allen wrench and exclusive redesign Installation instruction are included
- See more on Amazon...
Brand: QBOSO | Manufacturer: QBOSO
Dimensions: 0.10 x 6.69 x 4.69 inches
See On Amazon #8
Toy Box Hinges Soft Close,APFFSY Lid Support Hinges,Lid Stay for Chest Wardrobe Closet Cupboard Wooden Box, Max Weight Support 50lb/2pcs
Asin: B09B2HTN5N | Ean: 0631344780848, 0631344780749, 0631344780831 | UPC: 631344780831, 631344780848, 631344780749
Keep Lid Open - The Lid Support Hinge Will Hold The Lid Open Until You Want To Close.Never Worry About Having To Support Lid By Hand Anymore.It's Widely Usage For Box Or Chamber,Such As Toy Box,Chest,Closet,Cupboard, Window Seat,And Wardrobe Lids！.
Conditioned Soft Closing - Only With This Chest Hinges Supporting Less Than 50Lbs And Keeping Two Soft Close Lid Supports In Same Tension By Your Adjustment Will Soft Closing Function Work Perfectly.It Will Go Down Slowly,And Prevent Fingers From Getting Smashed..
Adjustable Tension - Adjust Tension With Allen Wrench To Fit For Lids With Different Weight.After Installing The Folding Lid Stay Hinge,Please Tighten The Mechanism Into Allen Wrench Hole In The Middle Of The Arms To Set Up Appropriate Pressure,Prevent Lid From Slamming Shut..
Easy To Install - Our Soft Close Hinges Can Be Mounted On The Left Or Right Side,Also Used For Side-Mounting And Top-Mounting.Upward Door Open Adjustable Angle Of 75°,90°,110°.Adjust By Yourself,Fit For Most Lids And Allow You To Keep Your Lids Stay At Any Angle To Your Needs!.
Features
- DURABLE MATERIAL - Max weight support 50lbs/2pcs.This up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance!
- EASY TO INSTALL - Our soft close hinges can be mounted on the left or right side,also used for side-mounting and top-mounting.Upward door open adjustable angle of 75 ,90 ,110 .Adjust by yourself,fit for most lids and allow you to keep your lids stay at any angle to your needs!
- KEEP LID OPEN - The lid support hinge will hold the lid open until you want to close.Never worry about having to support lid by hand anymore.It's widely usage for box or chamber,such as toy box,chest,closet,cupboard, window seat,and wardrobe lids
- ADJUSTABLE TENSION - Adjust tension with Allen wrench to fit for lids with different weight.After installing the folding lid stay hinge,please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure,prevent lid from slamming shut.
- CONDITIONED SOFT CLOSING - Only with this chest hinges supporting less than 50lbs and keeping two soft close lid supports in same tension by your adjustment will soft closing function work perfectly.It will go down slowly,and prevent fingers from getting smashed.
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.65 x 5.20 x 1.80 inches
See On Amazon #9
Ravaver Toy Box Hinges Soft Close, 26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card, Sold in Pairs (Black)
Asin: B09Q8BB99G | Model: 147 | PartNumber: 147
Lock Lid Open Securely: Hold Your Lid Open At Max 90 Degrees Until You Are Ready To Push It Shut. Never Worry About Having To Prop The Lid Open.
Before Purchasing: Do Not Support The Lid At Width Over 45In And Height Over 28In. Easy To Lift And Lower The Top Of Storage Chest, Window Seat Bench, Piano Bench And More Trunk.
Only Takes 5 Minutes To Get Installed By Following The Placement Measurement Card. Note: One Hinge For Left-Hand Mounting, And The Other One For Right-Hand Mounting.
Strong Support: For Lid Height Of Over 18In, Handle Lid Weight From 13Lbs To 17Lbs Per Hinge, While 2 Hinges Double Weight Support From 26Lbs To 34Lbs. For Lid Height Of Over 25In, Each Hinge Supports 7-9Lbs And Both Hinges Do 14-18Lbs.
Features
- GENTLE CLOSING: All-New hydraulic slow-down mechanism for improved stability and safety. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers
- STRONG SUPPORT: For lid height of over 18in, handle lid weight from 13lbs to 17lbs per hinge, while 2 hinges double weight support from 26lbs to 34lbs. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs
- LOCK LID OPEN SECURELY: Hold your lid open at max 90 degrees until you are ready to push it shut. Never worry about having to prop the lid open
- ONLY TAKES 5 MINUTES TO GET INSTALLED by following the placement measurement card. Note: one hinge for left-hand mounting, and the other one for right-hand mounting
- BEFORE PURCHASING: Do not support the lid at width over 45in and height over 28in. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk
- See more on Amazon...
Brand: Ravaver | Manufacturer: Ravaver
Dimensions: 2.00 x 7.00 x 4.00 Inches
See On Amazon #10
APFFSY 200N Gas Strut Heavy Duty Lid Support Hinge, Soft Close Heavy Lid Hinges Chest Hinges for Wooden Box Trunk Toy Box Slow Lowering Safety Hinges
Asin: B0B5538VTZ | Ean: 0631344781081 | UPC: 631344781081
【 Easy To Install- Important：Refer To Our Install Videos And Mail Images! 】The Heavy Duty Toy Box Hinges Soft Close Can Be Installed On Left Or On Right. Also Can Be Used For Side-Mounting And Top-Mounting. And We Will Provide Lifetime Warranty (No Man-Made) And Friendly Customer Service..
【 Warm Tips 】 The Lid Closer Is Very Sturdy And With Much Pressure!! Nice Performance For Lids That Hurger Or Weight Heavier, But No Fit Cabinet As That Small Or Light Lids/Doors. Please Note The Heavy Duty Support Weight Of This Lid Support Hinge Before Purchasing. If The Lid Is Relatively Light, Only 1Pc Chest Hinge (Support 30Lbs) Is Needed!.
【Safety Chhest Hinges Widely Usage 】Gas Struts Heavy Lid Hinges Designed To Lid Of Chest, Such As Heavy Duty Soft Close Hinges For Toy Box, And Bench Hinges, Blanket Chest Hinges, Seat Top Hinges, Trunk Hinges, Duck Or Dog House Roof, Similar Project, Etc. Perfect For Any Lids Or Flaps When Heavy Duty Lid Support Soft Close Required..
【 Strong Heavy Duty Lid Support Hinge And 75°-105° Opening Angles 】200N Gas Struts Heavy Duty Chest Hinges Support Heavy Lid Up To 60Lb/2Pcs (Under 30Lb/ Only 1Pc Needed!), And Chest Lid Slow Lowering. Allow Lids To Open For 75°-105° Adjustable Opening Angles..
Features
- SLOW CLOSE HINGES It's soft close hinges for heavy lid. Excellent soft close and safety hinges solution to heavy lid chest hinges, huge toy box hinges. Lid support hinge will hold the heavy lid opened until you push it down, then slow close gently to avoid to slam shut and crush the little fingers of kids. Good gift fit for the huge toy box or heavy lid chest.
- STRONG HEAVY DUTY LID SUPPORT HINGE AND 75 -105 OPENING ANGLES 200N gas struts heavy duty chest hinges support heavy lid up to 60lb/2pcs (Under 30lb/ only 1pc needed!), and chest lid slow lowering. Allow lids to open for 75 -105 adjustable opening angles.
- EASY TO INSTALL- Important Refer to our install videos and mail images! The heavy duty toy box hinges soft close can be installed on left or on right. Also can be used for side-mounting and top-mounting. And we will provide lifetime warranty (no man-made) and friendly customer service.
- SAFETY CHHEST HINGES WIDELY USAGE Gas struts heavy lid hinges designed to lid of chest, such as heavy duty soft close hinges for toy box, and bench hinges, blanket chest hinges, seat top hinges, trunk hinges, duck or dog house roof, similar project, Etc. Perfect for any lids or flaps when heavy duty lid support soft close required.
- WARM TIPS The lid closer is very sturdy and with much pressure!! Nice performance for lids that hurger or weight heavier, but no fit cabinet as that small or light lids/doors. Please note the heavy duty support weight of this lid support hinge before purchasing. If the lid is relatively light, only 1pc chest hinge (support 30lbs) is needed!
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.04 x 13.00 x 1.00 inches
See On Amazon #11
RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install
Asin: B07RNCZ3T2 | Ean: 0723172900038 | UPC: 723172900038
Keep Lid Hinge Stay Opening, Wide Usage -- Never Worry Again About Having To Prop The Lid Open. This Lid Support Will Hold The Lid Open Until You Are Ready To Close. This Lid Stay Is Deal For Upward Opening Flaps, Such As Toy Boxes And Vanity Lids, Vertical Cabinet Doors And Storage Box, Cabinetry, Piano Or Butt Hinges..
Easy To Install Lid Support-- Updated Manual Can Be Downloaded In Amazon Page.Easy To Follow Installation Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right..
Compact Design Of Lid Stay Hinge -- The Compact Design Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degree..
Lid Stay Slow Closing -- Lid Stay Support Built-In Hydraulic Dampening Device. Doors And Lids Will Come Down Slowly And Softly Which Eliminates Slamming Doors Or Smashed Fingers..
Features
- STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
- LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
- COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
- EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
- See more on Amazon...
Brand: RUYUFE | Manufacturer: RUYUFE
Dimensions: 0.10 x 8.00 x 2.00 inches
See On Amazon #12
MORINBO Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)
Asin: B0CDB755XD | Model: MODP-168 | PartNumber: MODP-168
Lid Stay Slow Closing 🌟 Lid Stay Support Built-In Hydraulic Dampening Device. Doors And Lids Will Come Down Slowly And Softly Which Eliminates Slamming Doors Or Smashed Fingers..
Keep Lid Hinge Stay Opening & Wide Usage 🌟 Updated Manual Can Be Downloaded In Amazon Page.Easy To Follow Installation Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right..
Compact Design Of Lid Stay Hinge 🌟 The Compact Design Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degree..
Easy To Install 🌟 Comes With An Exclusive Original Design Installation Card, Combined With The Most Detailed Installation Video Of The Entire Network On This Page, Allows You To Easily Complete The Hinge Installation..
Features
- STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
- EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation.
- LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
- KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
- See more on Amazon...
Brand: MORINBO | Manufacturer: MORINBO
Dimensions: 0.60 x 8.60 x 2.10 inches
See On Amazon #13
Lid Support Hinge Mcredy 9.0" x 0.4" Rotatable Folding Lid Support Hinge Silver Steel Wooden Toy Box Lids 1 Pair
Asin: B07W1X5GJ6 | Model: FY19041249 | PartNumber: FY19041249 | Ean: 0745678695409 | UPC: 745678695409
🌏【Used For】This Lid Stay Support With Soft Close Hinge Is Suitable For Furniture Cabinets, Office Racks, Wardrobes, Cabinets, Boxes, Etc..
🌏【Package】2 X Rotatable Folding Lid Support Hinge.
🌏【Folding Size】130X48mm/ 5.1X1.9" (Lxw);【Unfolded Size】230X10mm / 9X 0.4"(Lxw); Mounting Hole Distance: 26Mm/1.0".
🌏【Feature】These Box Lid Support Can Be Opened 180 Degrees, And The Angle Is Selected According To Your Needs.Mainly Used For Wood Projects And Can Also Be Used To Stabilize Folding Legs..
Features
- Material This Lid Support Hinge is made of stainless steel; Color: Silver
- Feature These box lid support can be opened 180 degrees, and the angle is selected according to your needs.Mainly used for wood projects and can also be used to stabilize folding legs.
- Used for This lid stay support with soft close hinge is suitable for furniture cabinets, office racks, wardrobes, cabinets, boxes, etc.
- Folding Size 130x48mm/ 5.1x1.9 (LxW); Unfolded Size 230x10mm / 9x 0.4(LxW); Mounting Hole Distance: 26mm/1.0
- Package 2 x Rotatable Folding Lid Support Hinge
- See more on Amazon...
Brand: Mcredy | Manufacturer: Mcredy
Dimensions: 0.01 x 5.12 x 1.89 inches
See On Amazon #14
Lid Support Hinge BADALU Toy Box Hinges Soft Close,Heavy Duty Lid Stay Hinges Perfect for Cabinet,Closet,Wardrobe or Toybox 110 Degree (1 Pair)
Asin: B0CHVHX3DH | Model: BD-110 | PartNumber: BD-110
Adjustable Tension Hinges - Our Toy Box Hinges Soft Close Tension Are Fully Adjustable, With Allen Wrench To Fit For Lids With Different Weight By Turning The Screw In The Middle Of The Arms To Set Up Appropriate Pressure. After Installing The Lid Hinges For Wooden Box, Pls Carefully Tighten The Hinges In The Holes To Build The Proper Pressure And Prevent The Lid From Slamming Shut..
Warranty & Service - Value 2-Pieces Soft Close Cabinet Hinges With Easy Install Srwes And Allen Wrench Tool. We Ensure That Give You A 100% Good Impression With Our Slow Close Cabinet Hinges,If You Have Any Question With This Hinges For Wooden Box,Pls Feel Free To Contact Us, We Will Reply You Within 24 Hours..
Easy To Install - Each Heavy Duty Lid Stay Hinges Can Be Used For Right Or Left Hand Mounting,Holds The Door At Any Angle You Want,Upward Door Open Adjustable Angle Of 75°,90°,110°,Please Do Ask Some One Skill In Carpentry.The Lid Support Hinge Is Designed For Avoiding Slam Shut And Slam Fingers ,You Can Lift The Lid By Yourself And Hold It Up While Storing Shoes, Linens, Kitchen Hardware Or Other Daily Goods..
Durable Material - All These Heavy Lid Support Hinge Guarantees High Performance: Max-Weight 35 Lbs When Use 2 Pc. Made Of Premium Quality Zinc Alloy And Durability The Chest Slow Close Hinges Guarantee High Performance, Features Corrosion-Resistance And More Durable Use..
Features
- Lid Support Hinge Heavy Duty & Soft Close - The enhanced version has the advantages of strong bearing capacity,maximum Weight of 35 lb. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for cabinet,closet,special overhead kitchen cupboard,wardrobe lids, etc.
- Durable Material - ALL these heavy lid support hinge guarantees high performance: Max-weight 35 lbs when use 2 pc. Made of premium quality zinc alloy and durability the chest slow close hinges guarantee high performance, features corrosion-resistance and more durable use.
- Adjustable Tension Hinges - Our toy box hinges soft close tension are fully adjustable, with Allen wrench to fit for lids with different weight by turning the screw in the middle of the arms to set up appropriate pressure. After installing the lid hinges for wooden box, pls carefully tighten the hinges in the holes to build the proper pressure and prevent the lid from slamming shut.
- Easy to Install - Each heavy duty lid stay hinges can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75 ,90 ,110 ,Please do ask some one skill in carpentry.The lid support hinge is designed for avoiding slam shut and slam fingers ,you can lift the lid by yourself and hold it up while storing shoes, linens, kitchen hardware or other daily goods.
- Warranty & Service - Value 2-Pieces soft close cabinet hinges with easy install srwes and Allen wrench tool. We ensure that give you a 100% good impression with our slow close cabinet hinges,if you have any question with this hinges for wooden box,pls feel free to contact us, we will reply you within 24 hours.
- See more on Amazon...
Brand: BADALU | Manufacturer: BADALU
See On Amazon #15
Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 1)
Asin: B0BNK68JMM | Model: 168 | PartNumber: 168 | Ean: 0749102974153 | UPC: 749102974153
Compact Design Of Lid Stay Hinge - The Compact Design Allows For Installation In Tight Fit Areas. Douper Lid Hinge Supports Opening The Lid At A Maximum Angle Of 105 Degrees.
Only Takes 10 Minutes To Complete The Installation By Following The Install Placement Measurement Card And Installation Video..
Wide Usage -- Never Worry Again About Having To Prop The Lid Open. This Lid Support Will Hold The Lid Open Until You Are Ready To Close. This Lid Stay Is Deal For Upward Opening Flaps, Such As Toy Boxes And Vanity Lids, Vertical Cabinet Doors And Storage Box, Cabinetry, Piano Or Butt Hinges.
2-Way Installation – Douper Hinges Can Be Installed On Top Opening Or Upward Opening Doors. Each Lid Hinge Can Be Used For Right Or Left Hand Mounting..
Conditions Of Use - Per Lid Stay Hinge Can Support The Range Of Door Weight 3-10 Lbs, Door Height Range18-19 Inch. Weight Support Will Be Doubled By Using 2 Lid Supports (6Lbs-20Lbs).
Features
- LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs)
- COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees
- 2-WAY INSTALLATION Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting.
- ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video.
- WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges
- See more on Amazon...
Brand: douper | Manufacturer: Douper Ltd
Dimensions: 1.00 x 9.00 x 2.00 inches
See On Amazon #16
Toy Box Hinges Soft Close - Chest Hinges Soft Close Hinges for Wooden Box Chest Toy Box, Lid Support Hinge 15-25lb/ 2Pcs Safety Slow Close Hinges 105 Degree Opening (APFFSY)
Asin: B09FHXJ9BQ | Ean: 0631344780770, 0631344780756, 0631344781142 | UPC: 631344780756, 631344781142, 631344780770
【Small Compact Design】 — The Slow Close Hinges Compact Design Allows For Installation In Tight Fit Areas, And The Lid To Open At A Maximum 105 Degree Angle. The Toy Chest Hinges Can Be Mounted On The Left Or Right Side, Also Used For Side-Mounting And Top-Mounting..
【Refund Guarantee】 — If You Are Not Satisfied With Your Purchase For The Toy Box Hinges Soft Close Any Reason, We Are Pleased To Give You 100% Money-Back. We Endeavor To Uphold Any Exceptional Services That You Have Come To Expect From Us..
【Easy To Install 『 Important：Refer To Our Videosand Images 』! 】 — The Chest Hinges Can Be Installed For 75°-105° Adjustable Opening Angles, Very Easy To Install. It Can Fit For Most Chest Lids Which Weight Is Under 25Lbs(Use 2Pcs)..
【Keep Lid Stay Open -Weight Capacity: 15-25Lb/2Pcs, 6-12Lb/1Pc】 — The Lid Support Hinge Will Hold The Lid Opened Until You Want To Close. Perfect For Lids Or Flaps Under 25Lbs And When Soft Close Lid Support Is Required. It's Widely Usage As Soft Close Hinges, Chest Hinges, Toy Box Hinges, Bench Seat Top Lid Hinges..
Features
- GENTLE SOFT CLOSE HINGES It's small chest hinge and soft close lid support. Expecially excellent soft close and safety solution on chest hinges, toy box hinges. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of children. Good gift fit for the children's toy box and toy chest.
- KEEP LID STAY OPEN -Weight Capacity: 15-25lb/2pcs, 6-12lb/1pc The lid support hinge will hold the lid opened until you want to close. Perfect for lids or flaps under 25lbs and when soft close lid support is required. It's widely usage as soft close hinges, chest hinges, toy box hinges, bench seat top lid hinges.
- SMALL COMPACT DESIGN The slow close hinges compact design allows for installation in tight fit areas, and the lid to open at a maximum 105 degree angle. The toy chest hinges can be mounted on the left or right side, also used for side-mounting and top-mounting.
- EASY TO INSTALL Important Refer to our videosand images ! The chest hinges can be installed for 75 -105 adjustable opening angles, very easy to install. It can fit for most chest lids which weight is under 25lbs(use 2pcs).
- REFUND GUARANTEE If you are not satisfied with your purchase for the toy box hinges soft close any reason, we are pleased to give you 100% money-back. We endeavor to uphold any exceptional services that you have come to expect from us.
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.39 x 4.70 x 2.20 inches
See On Amazon #17
Toy Box Hinges Soft Close - Lid Support Hinges (Pack of 2), Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges,Lid Support Soft Close 105 Degree Open (APFFSY)
Asin: B09YXTKTP9 | Ean: 0631344781104 | UPC: 631344781104
Small Compact Design — The Compact Design Allows For Installation In Tight Fit Areas. The Lid Stay Allows The Lid To Open At A Maximum 105 Degree Angle. Perfect For Any Lids Or Flaps When Lid Support Soft Close Is Required..
Refund Guarantee — If You Are Not Satisfied With Your Purchase For The Toy Box Hinges Soft Close Any Reason, We Are Pleased To Give You 100% Money-Back. We Endeavor To Uphold Any Exceptional Services That You Have Come To Expect From Us..
Easy To Install — The Safety Hinges Can Be Mounted On The Left Or Right Side, Also Used For Side-Mounting And Top-Mounting. Keep The Soft Close Hinges Installed For 75°-105° Adjustable Opening Angles, Depending On Actual Situation. It Can Fit For Most Lids.
Keep Lid Stay Open — The Lid Support Hinge Will Hold The Lid Open Until You Want To Close. Never Worry About Having To Support Lid By Hand Anymore. It's Widely Usage As Slow Close Hinges For Toy Box Hinges, Chest Hinges, Also Fit For Overhead Kitchen Cupboard, Wardrobe Lids Too！.
Features
- GENTLE SLOW CLOSE HINGES It's heavy lid hinge and soft close lid support. Expecially excellent slow close and safety solution on chest hinges, toy box hinges. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of children!
- KEEP LID STAY OPEN The lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage as slow close hinges for toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too
- SMALL COMPACT DESIGN The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle. Perfect for any lids or flaps when lid support soft close is required.
- EASY TO INSTALL The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75 -105 adjustable opening angles, depending on actual situation. It can fit for most lids
- REFUND GUARANTEE If you are not satisfied with your purchase for the toy box hinges soft close any reason, we are pleased to give you 100% money-back. We endeavor to uphold any exceptional services that you have come to expect from us.
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.40 x 8.80 x 2.20 inches
See On Amazon #18
RUYUFE Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors
Asin: B08BHTVCT2 | Ean: 0723172900007 | UPC: 723172900007
Weight Capacity– 25-50Lb Lid Support Hold 12Lbs-22Lbs/1Pc. 2 Hinges Support 25-50Lbs..
Easy To Install Only 5 Minute–Each Lid Hinge Can Be Used For Right Or Left Hand Mounting, Easy To Install By Following The Placement Measurements Of The Instructions..
Heavy Duty Hinge--Lid Support Hinge Is Made Of Zinc Alloy, Multi-Layer Electroplating Solid Process Casting, Fine Workmanship. Corrosion Resistance And Anti-Rust Durable And Practical..
Soft Close Safety Hinge -- Excellent Safety Solution For Heavy Hinged Lids, Lids Will Lower Slowly And Gently To Avoid Smashing Fingers. Lid Will Slow The Descent When The Opening Angle Is Less Than 70°..
Features
- LID STAY HINGE ROTATE ONE WAY TO LOCK LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90 . Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on.
- SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70 .
- WEIGHT CAPACITY 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs.
- HEAVY DUTY HINGE--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical.
- EASY TO INSTALL ONLY 5 MINUTE Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions.
- See more on Amazon...
Brand: RUYUFE | Manufacturer: RUYUFE
Dimensions: 0.10 x 7.00 x 1.00 Inches
See On Amazon #19
2-Pack Soft Close Hinges for Toy Boxes, Wooden Chests, Cedar Storage, Trunks & Benches | Zinc Alloy Slow Down Chest Hinges | Cabinet Slow Close Hinges for Flip Doors.
Asin: B0CXLVC1VV | Model: 101509 | PartNumber: 101509
Top-Notch Quality & Easy Setup: Built With Fancy Zinc Alloy, Our Slow-Down Hinge Can Handle Up To 50Lbs/2Pcs. Perfect For All Sorts Of Stuff Like Toy Boxes, Wooden Chests, Cedar Storage, Storage Trunks & Benches, And Even Those Flip-Doors On Your Cabinets..
Heads Up: Check Out The Detailed Pics We Included To In The Nail The Installation, And Grab The Right Number Of Lid Supports Based On Your Lid's Width. Easy Peasy!.
Swing It Your Way! Our Lid Stay Hinges Can Go On The Left Or Right. They Fit Most Lids With Open Angles Between 90° And 105°, Letting You Keep Your Lid At Whatever Angle Suits You Best..
Super Easy Installation: Just Use The Provided Template—No Need To Break Out The Measuring Tape. Watch The Simple Step-By-Step Video In The Manual For A Quick And Hassle-Free Setup In Minutes..
Features
- Safety & Peaceful: No more finger smashes or loud bangs! Our strong Lid Stay hinge with Soft Close keeps your peeps safe and things quiet. It's all about gentle closes and maximum safety for you and your loved ones.
- Super Easy Installation: Just use the provided template no need to break out the measuring tape. Watch the simple step-by-step video in the manual for a quick and hassle-free setup in minutes.
- Top-notch Quality & Easy Setup: Built with fancy zinc alloy, our slow-down hinge can handle up to 50lbs/2pcs. Perfect for all sorts of stuff like toy boxes, wooden chests, cedar storage, storage trunks & benches, and even those flip-doors on your cabinets.
- Swing it your way! Our lid stay hinges can go on the left or right. They fit most lids with open angles between 90 and 105 , letting you keep your lid at whatever angle suits you best.
- Heads up: Check out the detailed pics we included to in the nail the installation, and grab the right number of Lid Supports based on your lid's width. Easy peasy!
- See more on Amazon...
First Available: 04/12/2024
Brand: HBL' | Manufacturer: HBL'
Dimensions: 0.04 x 5.00 x 3.00 inches
See On Amazon #20
Lid Stay Hinges Heavy Duty-Toy Box Hinges Soft Close Macaro Lid Stay Support for Chest Toy Box Soft Close Hinge Support 50lb/2pcs
Asin: B0B9NGBCDR | Model: ma-52 | PartNumber: ma-52
Weight Capacity 50Lb--Lid Stay Max Weight Support 50Lbs/2Pcs, Lid Support Hinge Can Be Mounted On The Left Or Right Side. Upward Door Open Adjustable Angle Of 75,90,110 Degree By Yourself..
Adjust For Different Weight--With The Allen Wrench In The Package, The Support Hinges Are Fully Adjustable For Different Weight By Turning The Screw In The Middle Of The Arms To Set Up Appropriate Pressure So That The Lid Can Be Slow Close Gently Without Smashing Fingers..
Easy To Install Toy Box Hinge--The Hinges Can Be Mounted On The Left Or Right Side. It Can Fit For Most Lids And Allow You To Keep Lids Hinge At Any Angle. Just Drilling Holes, And Screw Each Mounting Bracket..
Durable Material Of Heavy Duty Hinge¡ª Made Of Premium Quality Zinc Alloy With Maximum Corrosion Resistance And Durability The Chest Slow Close Hinges Guarantee High Performance. The Up-Grated Have Strong Bearing Capacity, Which Metal Connector Instead Of Plastic Clip..
Features
- WIDE APPLICATION LID STAY--The lid support hinge keep the lid open until you want to close. Widely usage as hinges for wooden box, such as toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too. Perfect for any lids or flaps when soft close lid support is required.
- DURABLE MATERIAL OF HEAVY DUTY HINGE Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance. The up-grated have strong bearing capacity, Which metal connector instead of plastic clip.
- WEIGHT CAPACITY 50LB--Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. Upward door open adjustable angle of 75,90,110 degree by yourself.
- EASY TO INSTALL TOY BOX HINGE--The hinges can be mounted on the left or right side. It can fit for most lids and allow you to keep lids hinge at any angle. Just drilling holes, and screw each mounting bracket.
- ADJUST FOR DIFFERENT WEIGHT--With the Allen wrench in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slow close gently without smashing fingers.
- See more on Amazon...
Brand: macaro | Manufacturer: macaro
Dimensions: 7.00 x 7.50 x 0.20 inches
See On Amazon
Looking For Something Else?
Search