Smraza Metal Case for Raspberry Pi 5 with 4Pin PWM Cooling Fan 30MM & 10PCS Thermal Pads for Pi5 Model B 8GB 4GB(The Board for RPi 5 Not Included)
Asin: B0CNT2DZHR
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Fully Compatible With Pi5 Ports】The Half-Open Shell Design Allows Easy Access To Gpio And All Major Connector Interfaces, It Helps Receive Bluetooth And Wifi Signals..
【What You'll Get】1 × Black Metal Box(The Board For Pi 5 Not Included),10 × Thermal Pads，1 × Fan,，1 × Instruction Manual..
【Robust Metal Case For Rpi5】Sturdy Metal Case For Rpi5 Offers Dust And Shock Protection, Prolonging The Lifespan For Your Pi..
【Extreme Heat Dissipation】The Passive Casing Boasts High Thermal Conductivity, Large Heat Dissipation.Featuring A 4-Pin 8000 Rpm Adjustable Speed Silent 3007 Fan And Also Equipped With 10 Thermal Pads,The Temperature Is Controlled At Around 60℃, Ensuring Stable Operation Of The Case Even Under High Load Or In High-Temperature Environments..
Features
- Compatible with Pi5 Easy-to-install Cooling Casing designed specifically for Raspberry Pi 5 Model B 8GB 4GB.
- Extreme Heat Dissipation The Passive Casing boasts high thermal conductivity, Large heat dissipation.Featuring a 4-pin 8000 RPM adjustable speed silent 3007 fan and also equipped with 10 thermal pads,the temperature is controlled at around 60 , ensuring stable operation of the Case even under high load or in high-temperature environments.
- Fully Compatible with Pi5 Ports The Half-open Shell Design allows easy access to GPIO and all major connector interfaces, it helps receive Bluetooth and WiFi signals.
- Robust Metal Case for Rpi5 Sturdy Metal Case for RPi5 offers dust and shock protection, prolonging the lifespan for your pi.
- What You'll Get 1 Black Metal Box(The Board for Pi 5 Not Included),10 Thermal Pads 1 Fan, 1 Instruction Manual.
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
Warranty: 24 months
See On Amazon Similar To Smraza Metal Case for Raspberry
#1
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, Mini Servos for Arduino Project (10)
Asin: B07L2SF3R4
Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm). Dead Band Setting: 5 Ms.
Please Note: The Starting Current Of The Motor Should Be Greater Than 1A. Comes With 1 Year Warranty And Lifetime Technical Support.
Amplifier Type: Analog Controller. Operating Voltage: 4.8V～6.0V.
Interface Type: Compatible With Jr & Futaba Interface. Running Speed (At No Load): 0.09 ± 0.01 Sec/60°(4.8V ) 0.08 ± 0.01 Sec/60°(6V). Running Angle: 180 Degree.
Features
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 0.01 sec/60 (4.8V ) 0.08 0.01 sec/60 (6V). Running angle: 180 degree
- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 5 ms
- Amplifier Type: Analog controller. Operating Voltage: 4.8V 6.0V
- Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
Dimensions: 0.10 x 0.98 x 1.60 inches | Weight: 0.35 pounds
See On Amazon #2
Sg90 9g Micro Servo Motor, Miuzei Mini Servos Motor Kit Metal Gear 180 Degree Servo for Rc Car Airplane Plane Arduino 10 Pack
Asin: B072V529YD | Model: servo motors | PartNumber: servo motors | Ean: 0602430670893 | UPC: 602430670893
Micro Servo Motor - Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm). Dead Band Width: 7Usec. Operating Voltage: 4.8V～6.0V..
Note - Starting Current Of The Analog Servo Motor Should Be Over 1A And Servo Sg90 Are Analog Servos Need To Continuously Provide A Pmw Signal, Then It Will Be Work Normally..
Application Fields -Servos Used For Fixed-Wing, Helicopter, Kt, Glider, Small Robot, Robotic Arm And Other Models..
Mini Servo - Small Servo Motor Compatible With Jr & Futaba Interface. Micro Servo Running Speed (At No Load) : 0.09±0.01 Sec/60° (4.8V) 0.08 ± 0.01 Sec/60°(6V). Running Angle: 180 Degree..
Features
- SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
- Mini Servo - small servo motor compatible with JR & Futaba interface. Micro servo running speed (at no load) : 0.09 0.01 sec/60 (4.8V) 0.08 0.01 sec/60 (6V). Running angle: 180 degree.
- Micro Servo Motor - Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band width: 7usec. Operating Voltage: 4.8V 6.0V.
- Application Fields -Servos used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
- Note - Starting current of the analog servo motor should be over 1A and servo sg90 are analog servos need to continuously provide a PMW signal, then it will be work normally.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
Weight: 3.31 pounds
See On Amazon #3
ETMall 8PCS MG90S Servo 9G Micro Servo Motor Metal Geared Micro Servo Motor 9G Smart Robot Car Helicopter Plane Boat Compatible Arduino Raspberry Pi Project
Asin: B07R7PYK9T | Model: MG90S-801 | PartNumber: MG90S-801 | Ean: 0661757732493 | UPC: 661757732493
Mg90s 9G Servo Motor: Servo Can Rotate Approximately 180 Degrees (90 In Each Direction), And Works Just Like The Standard Kinds But Smaller..
Money-Back Guarantee: If You’Re Not Completely Satisfied For Any Reason, Simply Return It Or Contact Us.Your 100% Satisfaction Is Our Goal..
Easy To Operate: You Can Use Any Servo Code, Hardware Or Library To Control These Servos. Suit For Beginners Who Want To Make Stuff Move Without Building A Motor Controller With Feedback & Gear Box, Especially Since It Will Fit In Small Places..
Upgrade Gears Quality: This Mg90s Micro Servo Has Metal Gears For Added Strength And Durability.It Comes With A 3 Horns (Arms) And Hardware..
Features
- WIDE APPLICATIONS: Tiny and lightweight with high output power, this tiny MG90S servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot.
- UPGRADE GEARS QUALITY: This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware.
- MG90S 9G SERVO MOTOR: Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller.
- EASY TO OPERATE: You can use any servo code, hardware or library to control these servos. Suit for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places.
- MONEY-BACK GUARANTEE: If you re not completely satisfied for any reason, simply return it or contact us.Your 100% satisfaction is our goal.
- See more on Amazon...
Brand: ETMall | Manufacturer: ETMall
See On Amazon #4
Smraza Case for Raspberry Pi 4, Metal Case for Raspberry Pi 4 Model B with Cooling Fan 35MM, Case Aluminum Alloy Enclosure with 4 PCS Heatsinks Pillar Thermal Adhesive Black (RPI Board Not Included)
Asin: B08913RCWB | Model: SW49 | PartNumber: SW49
Access To All Ports - Metal Case For Raspberry Pi 4 Can Access To All Ports For Pi 4. Such As The Dual Micro Hdmi Port, Usb-C Power Connector Port, Audio/Video Port, Usb And Ethernet Ports And Micro Sd Card Slot..
Satisfaction Guaranteed - If For Any Reason You Aren't Completely Satisfied With The Case, Please Let Us Know And We Will Give You A Satisfy Solution..
High Quality Metal Material - Fan Case For Raspberry Pi 4 Made Of Smooth And Straight Aluminum Material, Ultra-Thin Design & Easy To Install. Strong Metal Case Can Protect Your Rasp-Berry Pi 4 From Scratched, Dust, Damaged..
Cooling System - Case With Cooling Fan For Raspberry Pi 4 And Built-In 4Pcs Thermal Adhesive To Tightly Touch With On-Board For Raspberry Pi 4 Chipset. Better For Heat Dissipation. Size Of Fan: 35 X 35 Mm(If You Reveive Wrong Size, Please Reaching Us To Get A Right One.) Size Of Heatsinks For Cpu: 25 X 25 Mm..
Features
- Case for Raspberry Pi 4 - Only compatible with Raspberry Pi 4 Model B. Access to all ports for Pi 4. Not for Pi 3B+. And RPI board not included.
- Cooling System - Case with cooling fan for Raspberry pi 4 and built-in 4pcs thermal adhesive to tightly touch with on-board for raspberry pi 4 chipset. Better for heat dissipation. Size of fan: 35 x 35 mm(If you reveive wrong size, please reaching us to get a right one.) Size of heatsinks for CPU: 25 x 25 mm.
- Access to All Ports - Metal case for raspberry pi 4 can access to all ports for Pi 4. Such as the dual micro HDMI port, USB-C power connector port, Audio/Video port, USB and Ethernet ports and micro SD card slot.
- High Quality Metal Material - fan Case for Raspberry pi 4 made of smooth and straight aluminum material, Ultra-thin design & Easy to install. Strong metal case can protect your rasp-berry pi 4 from scratched, dust, damaged.
- Satisfaction Guaranteed - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution.
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
See On Amazon #5
Smraza Case for Raspberry Pi 4, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B (RPI 4 Board Not Included) - Black (Case for Raspberry Pi 3)
Asin: B07CB7P1RD | Model: SW28-BF | PartNumber: SW28-BF
Smraza Upgraded 2.5A Raspberry Pi Power Supply - Output 5V Dc 2.5A Regulated, Safe To Use..
Allow All Gpio Ports Access - 9 Layers Acrylic Case(Come With Metal Screws) W/ Accurate Cutout For Gpio Ports..
Convenient To Control Pi - 59 Inch Power Cord W/ On Off Switch, Easy To Power On The Pi..
Fans & Heatsinks Cooling - Dc 5V Quiet Fan And 3Pcs Aluminum Heatsinks To Cool Down The Pi 3B Plus..
Features
- Case fits for Raspberry Pi 3 Model B+ (Latest Version) - Specially design for the 2018 new Raspberry Pi 3b+.
- Fans & Heatsinks Cooling - DC 5V quiet fan and 3pcs Aluminum heatsinks to cool down the pi 3b plus.
- Smraza Upgraded 2.5a raspberry pi power supply - Output 5V DC 2.5A Regulated, safe to use.
- Convenient to control pi - 59 inch power cord w/ on off switch, easy to power on the pi.
- Allow all GPIO ports access - 9 layers Acrylic case(come with metal screws) w/ accurate cutout for GPIO ports.
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
See On Amazon #6
Smraza Case for Raspberry Pi 3/2 Model B, with 9 Layers Computer Case,1 pcs Cooling Fan and 3 pcs Aluminum Heatsinks
Asin: B01LF5IEHO | Model: SW6sF | PartNumber: SW6sF
Brand: Smraza | Manufacturer: Smraza
Dimensions: 2.00 x 7.90 x 4.80 inches
See On Amazon
Looking For Something Else?
Search