Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Printing Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3D Printer Print Size 8.66x8.66x9.84 inch
Asin: B0CNWFDBZ6 | Model: Upgrade Creality Ender-3 V3 SE | PartNumber: Upgrade Creality Ender-3 V3 SE
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Worry-Free Cr Touch Auto Leveling & Strain Sensor】Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
【Auto Filament Loading & Unloading】Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Creality Official Support Service】Creality Provides 12-Month After-Sales Service For The Creality Ender-3 V3 Se 3D Printers. If You Have Any Question Or Need Support About The Product, Please Contact Me Via Amazon, We Will Respond With 24 Hours..
【Quick Assembly & Easy To Use】Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assemble The Ender-3 V3 Se 3D Printer, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Stable Dual Z-Axis & Y-Axis Linear Shafts】High-Precision Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively, Avoid Printing Deviation In Single-Axis Printing. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Ensuring Printing Stability And Higher Printing Accuracy Over A Long-Lasting Time..
【Powerful"Sprite" Direct Extruder】Ender 3 V3 Se Is The Upgrade Of Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro Etc 3D Printer, Comes With The New Upgraded "Sprite" Full Metal Dual-Geardirect Extruder, More Powerful Extruder Pushing Force And Lightweight, The Extruder Realizes Smooth Feeding And Discharging Of Flaments Without Slipping. Works Extremely Well In Printing Flaments Like Pla, Tpu, Petg, Etc. And The Extruder Is Market-Proven For Its Reliability, As Over 500,000 Units Have Been Shipped Worldwide..
Features
- 250mm/s High-speed Printing Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s acceleration.The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
- PowerfulSprite Direct Extruder Ender 3 V3 SE is the upgrade of ender 3, ender 3 v2, ender 3 pro, ender 3 neo, ender 3 v2 neo, ender 3 s1, ender 3 s1 pro etc 3d printer, comes with the new upgraded Sprite full metal dual-geardirect extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- Worry-free CR Touch Auto Leveling & Strain Sensor Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- Stable Dual Z-axis & Y-axis Linear Shafts High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time.
- Creality Official Support Service Creality provides 12-month after-sales service for the creality ender-3 v3 se 3d printers. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours.
- Quick Assembly & Easy to Use Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender-3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 15.00 x 22.00 x 9.00 inches | Weight: 15.60 Pounds
Warranty: 1 year warranty
See On Amazon Similar To Creality Ender 3 V3 SE
#1
Creality CR Laser Falcon 5W Laser Engraving Machine Compressed 10000mm/min Laser Spot 0.06mm Stainless Steel DIY Laser Cutter for Wood Acrylic by LaserGrbl Lightburn for Windows MacOS 15.7x16.3 inch
Asin: B09WR8L93B | Model: Ender 3 V3 SE | PartNumber: Ender 3 V3 SE | Ean: 6971636403623, 6971636401148
Brand: Creality
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 20.15 Pounds
See On Amazon #2
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.20 x 9.25 x 9.25 Inches | Weight: 0.66 Pounds
See On Amazon #3
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
Asin: B07BR3F9N6 | Model: Ender 3 | PartNumber: Ender 3 | Ean: 0796862079093, 0649910035087, 0680577986473, 0193621889328 | UPC: 649910035087, 680577986473, 796862079093, 193621889328
Advanced Extruder Technology: Upgraded Extruder Greatly Reduces Plugging Risk And Bad Extrustion; V-Shape With Pom Wheels Make It Move Noiseless, Smoothly And Durable..
Strict Test: Strict Testing For Key Components Before Delivery And Life-Time Technical Supports Available..
Safety Protected Power Supply: Only Needs 5 Minutes For Hot Bed To Reach 100 Degree..
Easy And Qucik Assembly: It Comes With Several Assembled Parts, You Only Need About 2 Hours To Assemble 20 Nuts Well..
Features
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 100 degree.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.31 x 16.14 x 16.54 inches | Weight: 15.43 Pounds
Warranty: 1 year
See On Amazon #4
Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder
Asin: B098D366R3 | Model: AK36WG-1200400J | PartNumber: AK36WG-1200400J
Filament Dryer And Remove Moisture - Comgrow 3D Printer Filament Dryer Box Is Designed To Keep Filament Dry And Remove Moisture From Kinds Of Filaments. Internal Heating During Printing Provides A Dry Storage Environment For 3D Printer Filaments And Keeps The Filament Dry. Avoid Entanglement, Clogging, Poor Adhesion, And Layer Migration Caused By The Dampness Of The Printing Wire. (Note: Only Used For The Drying Of 3D Printer Filament).
Great Sealed Filament Dry Box -The Outlet Structure Adopts A Silicone Cable Sheath And Teflon Tube, The Outlet Is Smooth And Can Be Covered With A Plug When Not In Use. The Upper Cover Has A Snap Button Structure, And The Sealing Performance Is Good..
How To Set The Filament - Place The Filament Into The Filament Outlet. Please Note That The Direction Is Placed Counterclockwise So That The Pulley At The Bottom Can Feed Better..
Real-Time Monitoring Of Temperature And Humidity - Adjustable Temperature Range 40°~ 50 °C, Setting Time From 6 Hours To 12 Hours. A 2-Inch Lcd Screen And Touch Buttons Make It Easy To Operate, It Is More Comprehensive And Clear Of The Information Display. Press The Power Button To Start, And Hold The Function Button(M) To Change The Dry Time And The Temperature Setting..
Setting Notes - Set The Temperature And Duration After Turning On The Filament Dehydrator. The Machine Will Work Only When The Work State Is Displayed On The Screen. If The Work Mode Is Not Displayed, The Motherboard Will Automatically Shut Down After 3 Minutes. If You Have Any Unsolvable Problems With The Comgrow Filament Dryer Box, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Features
- Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
- Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
- Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40 ~ 50 C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
- Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.
- How to set the filament - Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 9.00 x 9.20 x 6.40 Inches | Weight: 3.31 pounds
See On Amazon #5
Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0995H2X92 | Model: 3DZDTPZHTJ | PartNumber: 3DZDTPZHTJ
Wide Application - The Ender 3 Upgrades Cr Touch Is Compatible With Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5S/Ender 5 Pro And Cr-10 3D Printer. (Note: Our Ender 3 V2 Upgrades Can Only Be Compatible With 32-Bit V4.2.2/V4.2.7 Mainboard 3D Printers).Cr Touch Automatic Bed Leveling Sensor Kit Does Not Fit Skr Mini E3 V3 On Ender 5 Plus.
Easy Installation - 3 Different Kinds Of Mounting Brackets Allow For Installation On Multiple 3D Printers. The Ender 3 Bed Leveling Kit Is Simple In Structure, And It Is Convenient For Printing When Connected. Automatic Compensation Of The Z-Axis So As To Stabilize Print..
After-Sales Service - If You Have Any Unsolvable Problems During Installation Or Use Our Cr Touch Sensor Kit, Please Feel Free To Tell Us, And Our After-Sales Technical Team Will Provide You With Detail Solutions Within 24 Hours..
Durable And Strong Compatibility - The Cr Touch Kit Is Compatible With Pei/Sticker/Glass/Metal Bed. Ender 3 Auto Bed Leveling Kit Works Perfectly With Any Surface, Especially The Design Of The Metal Push Pin Allows For Longer Service Life..
The Firmware Download - According To Your 3D Printer Model, Select A Mounting Bracket To Install It On Your 3D Printer, Then Remove The Z-Axis Limit Switch. Download The Corresponding Firmware From The Creality Official Website And Copy It To The Sd Card. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- The Firmware Download - According to your 3D printer Model, select a mounting bracket to install it on your 3D Printer, then remove the Z-axis limit switch. Download the corresponding firmware from the Creality official website and copy it to the SD card. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct cr touch firmware).
- Wide Application - The Ender 3 upgrades cr touch is compatible with Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5s/Ender 5 Pro and CR-10 3D Printer. (Note: Our ender 3 v2 upgrades can only be compatible with 32-bit V4.2.2/V4.2.7 mainboard 3D Printers).CR Touch Automatic Bed Leveling Sensor Kit does not fit SKR Mini E3 V3 on Ender 5 plus
- Durable and Strong Compatibility - The cr touch kit is compatible with PEI/sticker/glass/metal bed. Ender 3 auto bed leveling kit works perfectly with any surface, especially the design of the metal push pin allows for longer service life.
- Easy Installation - 3 different kinds of mounting brackets allow for installation on multiple 3D printers. The Ender 3 bed leveling kit is simple in structure, and it is convenient for printing when connected. Automatic compensation of the Z-axis so as to stabilize print.
- After-sales Service - If you have any unsolvable problems during installation or use our cr touch sensor kit, please feel free to tell us, and our after-sales technical team will provide you with detail solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 3.93 x 2.48 x 1.61 Inches | Weight: 0.26 Pounds
See On Amazon #6
Creality Wood Filament PLA, 3D Printer Filament 1.75 mm, Smooth Silk Texture, Toughness, 1kg(2.2lbs)/Spool Printing Filament, for All FDM Printers (Wood)
Asin: B0BZCXM2Q8 | Model: CR-Wood_3301130001_us1 | PartNumber: CR-Wood_3301130001_us1
Environmentally Friendly Materials: Based On The Pla As The Main Material, It Continues The Advantages Of Easy Molding, No Warping And Low Shrinkage Of Pla.
Creality Support: Creality Provides 12-Month & 24 Hours After-Sales Service. Note： Please Place This Product In A Dry And Ventilated Environment, Not In An Environment Of High Temperature, Sunny Or Humid Conditions.
Stable Printing, Low Shrinkage: Stable Performance For Good Creations, Meeting Your Expectations Of High Precision Printings.
Neating Winding, Smooth Feeding: Reduce Filament Waste, Save Time And Improve Printing Success Rate.
Features
- CR-Wood Filament: Exquisite Wood Texture for Unique Property. Premium wood color and clear texture make people feel like being back to nature
- Neating Winding, Smooth Feeding: Reduce filament waste, save time and improve printing success rate
- Environmentally Friendly Materials: Based on the PLA as the main material, it continues the advantages of easy molding, no warping and low shrinkage of PLA
- Stable Printing, Low Shrinkage: Stable performance for good creations, meeting your expectations of high precision printings
- Creality Support: Creality provides 12-month & 24 hours after-sales service. Note Please place this product in a dry and ventilated environment, not in an environment of high temperature, sunny or humid conditions
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 8.27 x 8.27 x 2.76 inches | Weight: 2.20 pounds
Warranty: 1 Year
See On Amazon #7
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
Asin: B0BJCQ59JS | Model: US-EL-3D-N3P | PartNumber: US-EL-3D-N3P
【Nozzle Kit For Better Printing Effect】The Nozzle Kit Contains A Tc4 Titanium Alloy Throat Pipe, An Aluminum Alloy Flat Heat Sink Structure, And A Brass Nozzle.The Widened Aluminum Heat Sink Paired With The Front Close-Fitting Efficient Cooling Fan For A Better Heat Dissipation Effect And Lower The Temperature Of The Throat Pipe, Thereby Reducing The Possibility Of Nozzle Clogging..
【More Stable Printing】The Z-Axis With Dual Synchronized Lead Screws And Dual-Motor Drive For More Stable Movement Of The Print Head And Higher Printing Accuracy, Avoiding The Printing Deviation Driven By A Single Z-Axis Lead Screw Motor. The 4-Wheel V-Guide Rail Pulley Is Made Of Pom With More Stable Movement, Low Noise, Wear Resistance, And Longer Service Life..
【Smarter Printing Experience】Auto Mesh Bed Leveling Adopts A Non-Contact High Precision Sensor To Automatically Scan 36 (6X6) Points Of The Hotbed And Collect Data In Real-Time, And Then Adjust The Z-Axis Height To Compensate For Any Irregularities And Unevenness Of The Printing Platform. (Only Applicable To Metal Printing Platforms) Smart Resume Printing: The Printer Will Auto-Pause When The Filament Runs Out Or Breaks, And You Can Resume Printing After A Power Outage..
【Dual-Gear Direct Extruder】The New Dual-Gear Direct Drive Extruder Is Made Of Sus303 High-Quality Stainless Steel With A 3:1 Reduction Ratio And Stronger Extrusion Force For Smoother Filament Feeding And More Stable & Accurate Printing, Which Greatly Reduces Nozzle Clogging And Under-Extrusion Issues, Printing Effect Is Better Than Bowden Extruder. Compatible With Multiple Filaments Such As Pla, Tpu, Petg, And Abs..
Features
- Overview of Neptune 3 Pro 225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.
- Dual-Gear Direct Extruder The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.
- Nozzle Kit for Better Printing Effect The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
- Smarter Printing Experience Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
- More Stable Printing The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 19.00 x 23.00 x 9.00 Inches | Weight: 22.00 pounds
Warranty: 8 years manufacturer
See On Amazon #8
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #9
Creality Official Ender 3 Glass Bed Upgraded, High Hardness Durable Glass Platform for 3D Printer, Tempered Glass Build Plate for Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 3 V2, 235x235 4mm
Asin: B08XXVWN11 | Model: 6004010007 | PartNumber: 6004010007 | Ean: 0633690247198 | UPC: 633690247198
0.15Mm Of Flatness Recovery Model: This Is The Combination Of Glass And Composite. Due To The Flatness Of Glass And The Uniform Composite Coating Of Surface 'Lattice', The Platform Has Excellent Flatness..
High Hardness And Durable: This Is The Combination Of Chemically Tempered Glass And Surface Composite Coating. The Flatness Of Glass Will Be Much Better And The Composite Coating Of Surface 'Lattice' Will Be Uniform, Which Makes The Platform Have Excellent Flatness..
Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
High Viscosity And Strong Adhesion: Composite Nano Molecule Coating Has High Viscosity After Heating, Which Makes The Model Have Strong Adhesion..
Features
- Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.
- High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
- 0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.
- Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- High Hardness and Durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness.
- See more on Amazon...
First Available: 03/30/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 0.16 x 9.25 x 9.25 Inches
Warranty: 2 year manufacturer
See On Amazon #10
Creality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro and All 235 * 235mm Size 3D Printer
Asin: B0BRQ7LRNC | Model: CR-PEI0105 | PartNumber: CR-PEI0105 | Ean: 0783970029119 | UPC: 783970029119
【Easy Model Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Excellent Adhesion】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well..
Features
- Creality Official Creality Official Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well.
- Easy Model Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- Wide Application The size of ender 3 PEI is 235*235mm 9.25*9.25inch). please re-level it to improve the printing effect. it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Weight: 1.39 Pounds
See On Amazon #11
Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 3 Neo/3 V2 Neo/3 Max Neo
Asin: B09NMJMPN1 | Model: Creality Ender 3 Mainboard | PartNumber: Creality Ender 3 Mainboard
【Driver】Tmc2225 Driver & V0.0.6 Firmware From Creality ( Based On Marlin 2.0.1) For V4.2.7 Board. The Bootloader Has Been Preinstalled..
【After Sale Service】Any Issues Or Questions About Our Product Please Feel Free To Contact Us At Any Time. We Have Professional Technical Team To Provide Technical Supports For You Within 24 Hours..
【Update Firmware Method】Please Copy The Correct Firmware File To A Formated Sd Card With No Other Files In It. Turn Off The Printer And Unplug The Power Cord. Insert The Sd Card & Power Cord, And Turn On The Printer. Wait 10S To Complete The Firmware Updating Process..
【Widely Application】Compatible With Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D Printers. Please Notice: It Only Plug And Play For Ender-3. If You Want To Install It On Other Machine, Please Flash The Relative Machine V4.2.7 Firmware. You Can Download Firmware From Official Website..
Features
- Super Quiet The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
- Widely Application Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D printers. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
- Driver TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
- Update Firmware Method Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- After Sale Service Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.26 pounds
See On Amazon #12
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #13
Creality Ender-3 V3 KE 3D Printer, 500 mm/s High-Speed Printing with Auto-Leveling, Sprite Direct Extruder Supports 300 Printing, Smooth Detail, 220 220 250 mm Print Volume
Asin: B0CVVR6W27 | Model: Ender-3 V3 KE | PartNumber: Ender-3 V3 KE
Ultra-Smooth & Stable Motion: Ender-3 V3 Ke 3D Printer Robust Structure And Precision-Engineered Components Guarantee Smooth And Steady Movements. Upgraded The X-Axis Has A Carriage Slide Containing Ball Bearings, Yielding High-Quality Prints Every Time.
Hassle-Free Printing, User-Friendly: Creality 3D Printers Support Three Ways Of Printing, Phone Control, Wifi, And Usb Drive. Upgraded Easy To Install All-In-One Design, As Well As Filament Shift Sensor And Power Failure Recovery Function To To Save Time And Filament. Ideal 3D Printer Gift For Home, Beginners, Kids.
Precision-Focused Design: With Smart Algorithms Function, It Mitigates The Printer's Vibrations For Minimal Ringing Or Ghosting. Precise 0.1 Mm Printing Accuracy. Also Has Dual Fans For Fast Model Cooling, Making Your Prints Always In Good Shape.
Reliability & Versatile Printing: High Configuration Sprite Direct Extruder, 60W Ceramic Heater, Bi-Metal Heatbreak, And Copper Nozzle Enable 300℃ Printing And Smooth Feeding Of Various Filaments. Ender V3 Ke Can Handle Hyper Pla, Petg, Abs, Tpu(95A) And Asa Filaments.
Features
- Enhanced Faster & Smarter: Creality Ender 3 V3 KE can print at up to 500mm/s speed with 8000mm/s acceleration, lessening your waiting time. The intuitive touch UI screen and real-time model preview make your printing process smoother. Also features a CR Touch sensor for auto leveling, ensures accurate leveling of the build platform
- Reliability & Versatile Printing: High configuration Sprite Direct Extruder, 60W ceramic heater, Bi-metal heatbreak, and copper nozzle enable 300 printing and smooth feeding of various filaments. Ender V3 KE can handle Hyper PLA, PETG, ABS, TPU(95A) and ASA filaments
- Ultra-Smooth & Stable Motion: Ender-3 V3 KE 3d printer robust structure and precision-engineered components guarantee smooth and steady movements. Upgraded the X-axis has a carriage slide containing ball bearings, yielding high-quality prints every time
- Precision-focused Design: With smart algorithms function, it mitigates the printer's vibrations for minimal ringing or ghosting. Precise 0.1 mm Printing Accuracy. Also has dual fans for fast model cooling, making your prints always in good shape
- Hassle-free Printing, User-friendly: Creality 3D printers support three ways of printing, phone control, WiFi, and USB drive. Upgraded easy to install all-in-one design, as well as filament shift sensor and power failure recovery function to to save time and filament. Ideal 3D printer gift for home, beginners, kids
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 9.84 x 8.66 x 8.66 inches | Weight: 17.20 Pounds
Warranty: 1 Years
See On Amazon #14
Anycubic Kobra 2 Neo 3D Printer, Upgraded 250mm/s Faster Printing Speed with New Integrated Extruder Details Even Better, LeviQ 2.0 Auto-Leveling Smart Z-Offset Ideal for Beginners 8.7"x8.7"x9.84"
Asin: B0CCRDBH76
【Details Even Better】Apply The Linear Propulsion And Input Shaping Functions In Marlin Firmware To Reduce Spillage And Print Resonance, Improve Print Quality And Stability, And Create Smoother And Clearer Model Details. Novices Can Also Produce High-Quality Works For Their First Print..
【Excellent Customer Service】 Each Anycubic Kobra 2 Neo 3D Printer Comes With A One-Year After Service (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com.
【Leviq 2.0 Automatic Leveling】With The Design Of A Unique Module, The Z-Axis Offset Is Intelligently Compensated After Automatic Leveling, And The Z-Axis Compensation Value Is Supported To Meet The Needs Of Different Users And Usage Scenarios, So As To Start Creation Efficiently And Easily, And Also For Novices..
【New Integrated Extruder】The Newly Upgraded Extrusion System And Cooling System Melt Filaments Quickly Through The 60W Hot End. At The Same Time, It Is Equipped With A 7000 Rpm Cooling Fan To Ensure Rapid Cooling And Molding Of The Model..
Features
- 5X High-Speed More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
- New Integrated Extruder The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
- Details Even Better Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
- LeviQ 2.0 Automatic Leveling With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
- Excellent Customer Service Each Anycubic Kobra 2 Neo 3D Printer comes with a one-year after service (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 19.00 x 17.00 x 17.00 inches | Weight: 18.74 Pounds
Warranty: 1 year warranty and lifetime technical support
See On Amazon #15
3D Printer Enclosure with LED Lighting, Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, Medium
Asin: B0CDXCTQP1 | Model: Enclosure-M | PartNumber: Enclosure-M | Ean: 0792105752396 | UPC: 792105752396
【Dustproof And Fireproof, Safe To Use】Protect Your 3D Printer And Reduce The Risk Of Accidents With Fire-Resistant Materials And A Sturdy Structure. Avoid Dust Particles From Entering And Negatively Impacting Print Quality, Ensuring Stable And Perfect Results Every Time. Effectively Prevent Accidental Touches From Children Or Pets..
【Isolate Noise And Enjoy Creation Quietly】 An Enclosed 3D Printer Cover With All Six Sides Effectively Blocks The Transmission Of Printing Noise, Effectively Reduce Noise And Enjoy The Silent Printing Process，.
【Wide Compatibility】Support Printer Size (Include Spool Holder Height) Is Smaller Than 28.7×25.6×21.6". Please Measure Your Printer Height Before Ordering. Compatible With Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6Se/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/Elegoo Naptune 3D Printer..
【Fast Installation And Long-Term Use】5 Minutes Easy Installation, Quick Start And Easily Disassembled For Moving Or Replacing. Its Robust Construction Ensures Stability During Operation, Minimizing Vibrations That Could Compromise Print Precision, And Can Support Your Long-Term Use And Is Not A Disposable Product..
【Improve Print Quality With Constant Temperature】Provides A Stable And Controlled Environment For Your Prints, Maintaining A Consistent Temperature During Printing Ensures That You Produce High-Quality Prints While Avoiding Print Failures And Material Wastage. Constant Temperature Reduces The Risk Of Material Clogs And Jams, Enhancing Your Printing Speed And Efficiency..
Features
- Enhanced Illumination For Your Printing Area Improve your workspace visibility with our innovative built-in LED light strip. It will illuminate your printing process, allowing you to monitor it more effectively. By quickly identifying potential issues such as filament jams, layer adhesion problems, or misalignments, you can address them promptly even in low-light conditions.
- Improve Print Quality with Constant Temperature Provides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.
- Dustproof and Fireproof, Safe to Use Protect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.
- Fast Installation and Long-term Use 5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.
- Isolate Noise and Enjoy Creation Quietly An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process
- Wide Compatibility Support printer size (include spool holder height) is smaller than 28.7 25.6 21.6. Please measure your printer height before ordering. Compatible with Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6SE/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/ELEGOO Naptune 3D Printer.
- See more on Amazon...
First Available: 08/29/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 80.00 x 45.00 x 25.00 inches | Weight: 4.30 pounds
Warranty: 180-Warranty
See On Amazon #16
Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Asin: B0CRDS6PRR
Strong Magnetic Force - The Pei Sheet 235X235mm Is Selection Of Strong Magnetic Paste, High Temperature Can Still Maintain A High Degree Of Magnetism, To Ensure The Stability Of Printing. The Ender 3 V3 Se Build Plateis Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print, It Can Print With Most Filaments, Such As Pla / Abs / Asa / Petg / Tpu / Nylon / Pa / Pc..
Wide Compatibility - The Pei Sheet 235X235mm And Peo Smooth Surface Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality K1c/K1/Ender 3 V3/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer..
Positioning Holes Design - Double Handles + Positioning Holes Design, Precise Positioning, Easy And Simple Installation. The Pei Spring Steel 235X235mm Makes The Prints Easy To Adhere To The Printing Surface, And It Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Excellent Flatness - The Ender 3 V3 Ke Pei Magnetic Heated Bed Provides The High Flatness Spring Steel, Ensuring The Model Can Be Firmly Attached To The Surface Of The Print Platform, Can Be Repeated Bending Without Deformation, Easy To Take The Model..
Features
- Premium Quality PEI Coating - The Creality K1 PEI Spring Steel 235x235mm is made of High temperature resistant PEI coating on the surface, high abrasion resistance and high strength frosted texture, the PEI build surface is not easy to scratch.
- Excellent Flatness - The Ender 3 V3 KE PEI Magnetic Heated Bed provides the high flatness spring steel, ensuring the model can be firmly attached to the surface of the print platform, can be repeated bending without deformation, easy to take the model.
- Strong Magnetic Force - The PEI Sheet 235x235mm is selection of strong magnetic paste, high temperature can still maintain a high degree of magnetism, to ensure the stability of printing. The ender 3 V3 SE Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC.
- Positioning Holes Design - Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- Wide Compatibility - The PEI sheet 235x235mm and PEO smooth surface is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality K1C/K1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #17
Official Creality K1C Silicone Sock, 3PCS Ender 3 V3 Silicone Cover, Hotend Heat Insulation Case Cover Heating Block Cover for Creality Ender 3 V3/Ender 3 V3 Plus/Ender 3 V3 KE/K1C/K1/K1 Max/CR 10 SE
Asin: B0CSKHT7ZD
【Heat Insulation】Ender 3 V3 Plus Silicone Socks Can Accelerate The Heating Process, Avoid Heat Dissipation At The Heating End, Stabilize The Temperature At The Heating End, And Is Not Affected By Any Environment..
【After-Sales Support】We Are The Official Creality Store And Pay Great Attention To The Buyer’S User Experience. We Provide Professional After - Sale Support, More Than 20 Engineers Provide Customer Service 24 Hours / 7 Days, Please Contact Us Directly (Seller) Via "Ask A Question"..
【Package】3Pcs Creality Ender 3 V3 Ke Silicone Socks For Daily Replacement.Sock Blocker Is Flexible, Can Be Placed Close To The Home Heater Block, Solid And Not Easy To Fall Off, Easy To Install..
【Keep Clean】Not Only Can It Effectively Protect The Creality Hotend From Wear And Tear, But Also Keep It Clean And Prolong Its Service Life. Also Clean The Insulation Around The Nozzle To Prevent Burns..
Features
- Quality Assurance 100% original Creality heater block silicone sock for Creality K1C/Ender 3 V3/Ender 3 V3 Plus/Ender 3 V3 KE/K1 /K1 Max/CR-10 SE. Creality Ender 3 V3 silicone socks are made of heat-resistant, non-stick silicone material, much more durable.
- Keep Clean Not only can it effectively protect the Creality hotend from wear and tear, but also keep it clean and prolong its service life. Also clean the insulation around the nozzle to prevent burns.
- Heat Insulation Ender 3 V3 Plus silicone socks can accelerate the heating process, avoid heat dissipation at the heating end, stabilize the temperature at the heating end, and is not affected by any environment.
- Package 3PCS Creality Ender 3 V3 KE silicone socks for daily replacement.Sock blocker is flexible, can be placed close to the home heater block, solid and not easy to fall off, easy to install.
- After-Sales Support We are the Official Creality Store and pay great attention to the buyer s user experience. We provide professional after - sale support, more than 20 engineers provide customer service 24 hours / 7 days, please contact us directly (seller) via ask a question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.91 x 0.73 x 1.02 Inches
See On Amazon #18
Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B09DVYZSYJ | Model: CRTOUCH | PartNumber: CRTOUCH
【Independent Research And Development Stable Function】Cr Touch Is A Creality 3D Research Institute Self-Developed 3D Printer Platform Leveling Solution Based On Hundreds Of Millions Of User Data Used By The Creators. Compared With The Traditional Automatic Leveling , It Is Compatible With More 3D Printer Platforms, More Stable And Cose-Effective. With Stable Quality And Long Service Life, It Can Be Reused For More Than 100,000 Times..
【Strong Compatibility】Creality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
【Package Include】1*Cr Touch Auto Leveling Sensor, 5*0.4Mm Nozzle, 3*Moounting Brackets, 1*Installation Guide, 3*Tie And 4*Screw.
【Multi-Point Detection Smart Compensation】Cr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
【About Reflash The Firmware】1. Download The Corresponding Firmware From The Creality Official Website. 2. Copy It To The Sd Card. 3. Rename It To 123.Bin, 4. Insert The Sd Card Into The Printer, 5. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Wide Application This Creality cr touch auto-leveling kit is equipped with 3 mounting brackets and is only suitable for the following 3D printers with V4.4.2/V4.2.7 motherboards (Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/cr 10), other machines are not compatible. Please confirm your machine and motherboard version before purchasing.
- About Reflash the Firmware 1. Download the corresponding firmware from the Creality official website. 2. copy it to the SD card. 3. Rename it to 123.bin, 4. Insert the SD card into the printer, 5. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct CR touch firmware).
- Independent research and development Stable function CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- Multi-point detection Smart compensation CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Strong compatibility Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- Package Include 1*CR Touch Auto Leveling Sensor, 5*0.4mm Nozzle, 3*Moounting brackets, 1*Installation Guide, 3*Tie and 4*Screw
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.29 pounds
See On Amazon #19
Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 V3 SE/5/K1 Max 3D Printer
Asin: B09GM6W972
Smoother Filament Output: Designed For 1.75Mm Filament, Creality Capricorn Tubing Has Extremely Accurate Inner & Outer Diameters, And Filament Loads Smoothly Into The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend..
Great Package: The Package Comes With Two Pc4-M6 Fittings For The Extruder And Two Pc4-M10 Couplers For The Hot End, Its 2Mm Inner Diameter Is Used For The Teflon Tube With An Outer Diameter Of 4Mm. It Includes Everything You Need To Get Started!.
1 Meter Tube With 2Mm Id 4Mm Od: Teflon Tube Length: 1 Meter, Inner Diameter: 1.95Mm ± 0.05Mm, Outer Diameter: 4Mm. The Optimal Inner Diameter Size Is Designed To Reduce "Wiggle Room" Or Flex In The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems..
Compatible With More Filaments: This Bowden Tube Is Reinforced With A Proprietary Blend Of High-Performance Additives That Can Withstand Higher Temperatures Than Any Other Tubes, Making It Ideal For Printing Specialty Filaments Such As Abs, Nylon, And Polycarbonate. This Ptfe Tube Xs Tubing Can Keep Working At Temperatures Up To 260°C..
Features
- Genuine Upgrades: Creality Capricorn XS Series Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less retraction, and more accurate prints. There is less slippage, wear and tear on the extruder and less clogging when printing chunky filaments such as some wood fillers or iron fillers.
- Compatible with More Filaments: This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube XS tubing can keep working at temperatures up to 260 C.
- Smoother Filament Output: Designed for 1.75mm filament, Creality Capricorn tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.
- 1 Meter Tube with 2MM ID 4MM OD: Teflon tube length: 1 Meter, inner diameter: 1.95mm 0.05mm, outer diameter: 4mm. The optimal inner diameter size is designed to reduce wiggle room or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems.
- Great Package: The package comes with two PC4-M6 fittings for the extruder and two PC4-M10 couplers for the hot end, its 2mm inner diameter is used for the Teflon tube with an outer diameter of 4mm. It includes everything you need to get started!
- See more on Amazon...
Brand: Mefine | Manufacturer: Creality
Weight: 0.11 Pounds
See On Amazon
Looking For Something Else?
Search