BXZ Front Bumper Cover Retainer Bracket Support Mount for 2013 2014 2015 2016 2017 2018 Toyota Rav4
Asin: B0CNY1Q736 | Model: BXZ | PartNumber: BXZ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Front Bumper Lower Retainer Bracket Pair Driver And Passenger Side Include.2Pieces..
Fit For Toyota Rav4 Limited,Platinum,Se,Xle,Hybrid,Ev Model..
Made Of High Quality Abs Plastic With 1 Year Warranty..
Replace For Part Number To1033116,525350R030,To1032116,525360R030,To1042129,525360R060,To1043129,525350R080.
Features
- Front Bumper Cover Retainer Bracket Support Mount For 2013 2014 2015 2016 2017 2018 TOYOTA Rav4
- Replace for part number TO1033116,525350R030,TO1032116,525360R030,TO1042129,525360R060,TO1043129,525350R080
- Front Bumper Lower Retainer Bracket Pair Driver and Passenger side include.2pieces.
- Made of high quality ABS plastic with 1 year warranty.
- Fit for Toyota Rav4 Limited,Platinum,SE,XLE,Hybrid,EV model.
- See more on Amazon...
Brand: BXZ | Manufacturer: BXZ
Dimensions: 4.20 x 11.57 x 3.30 inches
Warranty: 1 Year
See On Amazon Similar To BXZ Front Bumper Cover Retainer
#1
Bumper Trunk Quick Release Front Rear Bumper Fastener Kit
Asin: B09VDF2ZMN | Ean: 0768484030936 | UPC: 768484030936
First, Mark Where You Will Install The Quick Bumper Release Kit.Then,Drill The Holes.After,Install The Aluminum Knot.Put The Washer On The Other Side Of The Bumper/Fender. You Will Need A Hex Tool As Well As A Wrench To Fasten Everything Together.Afterwards, Mount It Back With The Rubber Band.You Can Either Put The Rubber Band In The Normal Way Or Even A Cross With The Same Result..
100% Satisfaction -When You Receive The Goods, If There Are Any Problem, Please Contact Us And Do Not Directly Open The Dispute. We Promise We Will Give You A Satisfied Solution After We Confirmed It. We Also Will Give You A Positive Evaluation..
This Is A Great Mod For People Who Are Always At The Pits. As You Can See, The Installation Does Not Take Too Long To Install, And The Drilling Is Completely Worth It For The Fresh New Look. Enjoy Your Quick Bumper Release Fasteners!.
Package Includes: 4 X Quick Release Tabs; 4 X Stainless Steel Bolts; 4 X Nuts; 4 X Washers; 2X O-Rings..
Features
- Need to attach and detach your bumper quickly? Quick release fasteners are great for front bumpers, rear bumpers, and hatch lids that need to be frequently removed. They are perfect for people who go to the pits often and are not difficult to install.
- Package Includes: 4 x Quick release tabs; 4 x Stainless steel bolts; 4 x Nuts; 4 x Washers; 2x O-Rings.
- First, mark where you will install the quick bumper release kit.Then,Drill the holes.After,Install the aluminum knot.Put the washer on the other side of the bumper/fender. You will need a hex tool as well as a wrench to fasten everything together.Afterwards, mount it back with the rubber band.You can either put the rubber band in the normal way or even a cross with the same result.
- This is a great mod for people who are always at the pits. As you can see, the installation does not take too long to install, and the drilling is completely worth it for the fresh new look. Enjoy your quick bumper release fasteners!
- 100% SATISFACTION -When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation.
- See more on Amazon...
Brand: Ouzorp | Manufacturer: Ouzorp
See On Amazon #2
20Pcs Front Bumper Push-Type Retainer Clips, 10mm Fender Liner Clip Compatible with Honda CR-V Accord Civic Acura 91503-SZ3-003 Nylon Clip Fasteners Push Type Push Pin Screws
Asin: B0BSDYK445
【Compatibility】Compatible With Honda Accord 2001-2014, Cr-V 1997-2021, Cr-Z 2011-2016, Civic 1997-2016, Del Sol 1997, Element 2003-2011, Fit 2007-2020, Insight 2000-2014, Odyssey 1996-2022, Passport 2019-2021, Pilot 2003-2021, Prelude 1997-2001, S200 2000-2009, Ridgeline 2006-2014.
Service---If You Have Any Questions About The Product, You Can Contact Us By Email, We Will Solve You As Soon As Possible..
【Widely Use】 Bumper, Door Trim, Fender, Radiator Shield Yoke, Grille, Side Skirt, Interior Trim Panel And Various Trim Panels,Can Be Used On Cars, Buses, Trains, Planes, Truck, Motorcycles, Caravans, Etc..
【Compatibility】Compatible With Acura Cl 1997-2003, Integra 1996-2001, Mdx 2001-2014, Nsx 1997 - 2021, Rdx 2007-2014, Rl 1996 - 2012, Rsx 2002 - 2006, Tl 1997 - 2014, Zdx 2010 - 2013, Tsx 2004 - 2014..
Features
- The Same Size 16 mm stem length and 20 mm head diameter, Exact replacement for the old and cracked or missing clips
- Compatibility Compatible with Acura CL 1997-2003, Integra 1996-2001, MDX 2001-2014, NSX 1997 - 2021, RDX 2007-2014, RL 1996 - 2012, RSX 2002 - 2006, TL 1997 - 2014, ZDX 2010 - 2013, TSX 2004 - 2014.
- Compatibility Compatible with Honda Accord 2001-2014, CR-V 1997-2021, CR-Z 2011-2016, Civic 1997-2016, Del Sol 1997, Element 2003-2011, Fit 2007-2020, Insight 2000-2014, Odyssey 1996-2022, Passport 2019-2021, Pilot 2003-2021, Prelude 1997-2001, S200 2000-2009, Ridgeline 2006-2014
- Widely Use Bumper, Door trim, Fender, Radiator shield yoke, grille, Side Skirt, interior trim panel and various trim panels,can be used on cars, buses, trains, planes, truck, motorcycles, caravans, etc.
- Service---If you have any questions about the product, you can contact us by email, we will solve you as soon as possible.
- See more on Amazon...
Brand: stymart | Manufacturer: stymart
See On Amazon #3
GOOACC - GRC-34 Push Bumper Fastener Rivet Clips with 18 Most Popular Sizes Auto Push Pin Rivets for Benz, BMW, Toyota, Honda, Subaru, Nissan, Mazda etc
Asin: B07MVBCWRF | Model: GRC-34 | PartNumber: GRC-34 | Ean: 0812227030988 | UPC: 812227030988
Bonus Auto Fastener Remover - Allow You To Quickly And Easily Remove Car Door Panel Trim Clips And Upholstery Clips Without Causing Damage To Them. Easy Access Into Confined Areas..
Note: Gooacc Offers Clear Pictures For Your Reference, Please Check The Size, Type And Shape To Make Sure The Item Is The One That You Need.If You There Is Any Issue After Sale Such As Inappropriate Size& Shape, Please Email Us Directly, We Will Offer 100% Satisfactory Service..
Premium Quality Retainer Assortment: Gooacc Push Rivets Are Made Of Heavy-Duty Plastic&Nylon, Which Is Strong, Robust And Vibration Resistant, Would Not Break Or Crack Easily..
Widely Application:Theses Push Clips Are Widely Used For Car Body Clips, Trim Panel Retainer, Door Trim Fastener, Door Panel Clips, Bumper Clips, Fender Clips, Engine Cover And Splash Shield Retainers Replacement. It Always Covers Some Applications Include Telecom Equipment, Motor Vehicles, Domestic Appliances, Furniture And Electrical Equipment..
Features
- 18 MOST COMMON SIZE: GOOACC push retainer Clips are suitable for Mercedes Benz, BMW, TOYOTA, Honda, Subaru, NISSAN, Mazda, Lancer for exact replacement.Not Only for the cars we mention, if the sizes and shape meet your requirement, it also works well
- WIDELY APPLICATION:Theses push clips are widely used for car body clips, trim panel retainer, door trim fastener, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- BONUS AUTO FASTENER REMOVER - Allow you to quickly and easily remove car door panel trim clips and upholstery clips without causing damage to them. Easy access into confined areas.
- PREMIUM QUALITY RETAINER ASSORTMENT: GOOACC push rivets are made of heavy-duty plastic&nylon, which is strong, robust and vibration resistant, would not break or crack easily.
- NOTE: GOOACC offers clear pictures for your reference, please check the size, type and shape to make sure the item is the one that you need.If you there is any issue after sale such as inappropriate size& shape, please email us directly, we will offer 100% satisfactory service.
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 8.78 x 2.20 x 12.01 inches
Warranty: 2 Years Warranty
See On Amazon #4
Bumper Quick Release, Mellbree JDM Quick Release Holders Front Rear Bumper Fasteners Trunk Band Fenders clip Kits Compatible for Universal Car Bumper (Black 4 x Release Tabs with 12 x O-Ring Fastener
Asin: B09GK6Q2P1
Custom Rubber: Customized Nitrile Rubber (Nbr) Is Used To Bid Farewell To Ordinary Rubber That Breaks When It Is Used, And Melts When Exposed To The Sun. The O-Rings We Use Have Strong Wear Resistance And Excellent Heat Resistance. Compared With Other Rubbers, Nbr Has A Wider Range Of Operating Temperatures. Because The Rubber Ring Is Always A Consumable, We Have Added An Additional 10X Fixing Ring, Just To Facilitate Your Daily Use..
The Package Contains: 4 X Black Bumper Quick Release Tabs, 4 X Stainless Steel Bolts, 4 X Nuts, 4 X Washers, 12 X Customized Nitrile Rubber (Nbr) O-Rings (10 For Replacement Use).
How Long Is The Warranty/Renew? We Offer A Hassle-Free 12-Month Warranty And 24-Hour Friendly Customer Service. If There Is Any Dissatisfaction With The Product, Or The Parts Are Missing, Please Contact Us At Any Time, Whether It Is A New One Or A Refund, We Will Definitely Give You A Satisfactory Answer. Be Responsible For Your Choice, Let You Place An Order With Peace Of Mind~.
Aluminum Alloy Quick Release Bumper Fasteners Ensure The Stability In Use. As A Common Structural Material In Auto Parts, Its Excellent Hardness And Strength Make You More At Ease In Use..
Quickly Remove：1. Take Out The Bumper Quick Release Fasteners And O-Rubber Ring First, And Lift The Bumper To The Position You Want. 2. Then Mark The Desired Hole Position On The Mudguard. 3. Taking Into Account The Elasticity Of Rubber, The Spacing Can Be Slightly Shortened To Achieve A Tightly Symmetrical Effect. The Quick Release Bumper Fasteners Kit Has A Complete Set Of Supporting Parts, Which Makes It Very Convenient For You To Install And Use In The Future..
Features
- Best choice: Aluminum bumper fasteners can help you solve the problem of easily re-fixing the car bumper after it falls off; it supports quick, easy and frequent disassembly of the front bumper and rear bumper; of course, it is also an excellent embodiment of your fashion style.
- Quickly remove 1. Take out the bumper quick release fasteners and O-rubber ring first, and lift the bumper to the position you want. 2. Then mark the desired hole position on the mudguard. 3. Taking into account the elasticity of rubber, the spacing can be slightly shortened to achieve a tightly symmetrical effect. The quick release bumper fasteners kit has a complete set of supporting parts, which makes it very convenient for you to install and use in the future.
- Custom rubber: Customized nitrile rubber (NBR) is used to bid farewell to ordinary rubber that breaks when it is used, and melts when exposed to the sun. The O-rings we use have strong wear resistance and excellent heat resistance. Compared with other rubbers, NBR has a wider range of operating temperatures. Because the rubber ring is always a consumable, we have added an additional 10X fixing ring, just to facilitate your daily use.
- Aluminum alloy quick release bumper fasteners ensure the stability in use. As a common structural material in auto parts, its excellent hardness and strength make you more at ease in use.
- The package contains: 4 x Black bumper quick release tabs, 4 x Stainless steel bolts, 4 x Nuts, 4 x Washers, 12 x Customized nitrile rubber (NBR) O-Rings (10 for replacement use)
- How long is the warranty/renew? We offer a hassle-free 12-month warranty and 24-hour friendly customer service. If there is any dissatisfaction with the product, or the parts are missing, please contact us at any time, whether it is a new one or a refund, we will definitely give you a satisfactory answer. Be responsible for your choice, let you place an order with peace of mind~
- See more on Amazon...
Brand: Mellbree | Manufacturer: Mellbree
See On Amazon #5
20pcs Fastener Rivet, Rear Front Bumper Cover Fender Grille Under Cover Push-Type Retainer Clip Compatible with Honda Acura Civic 91505-TM8-003, black
Asin: B0B6HHKB6B | Model: Rydowenna-91505-TM8-003 | PartNumber: Rydowenna-91505-TM8-003
Compatible With Honda Accord 2013-2019 Accord Hybrid 2014-2019 Civic 2013-2019 Crosstour 2013-2015 Cr-V 2013-2019 Cr-Z 2013-2016 Fit 2015-2019 Hr-V 2016-2019 Insight 2012-2014 Odyssey 2013-2019 Pilot 2014-2019 Passport 2019 Ridgeline 2017-2019..
These Will Make Your Job Easier, Low-Cost Solution To A Problem That Could Otherwise Have Been Quite Difficult To Solve..
Front Bumper Clip, Front Fenders, Front Grille, Front Underbody Spoiler, Upper Resonator Retainer Clip, Rear Bumper, Side Underbody Spoiler, Under Cover Rear Inner Fender, Splash Guard.
Include 20 X Fender Liner Clips Screw, Oem# 91505-Tm8-003.
Features
- Black Nylon, Head Diameter: 20mm/0.79in; Stem Length: 14mm/ 0.55in; Fits Into 10mm/0.39in Hole
- Include 20 x Fender Liner Clips Screw, OEM# 91505-TM8-003
- Compatible with Honda Accord 2013-2019 Accord Hybrid 2014-2019 Civic 2013-2019 Crosstour 2013-2015 CR-V 2013-2019 CR-Z 2013-2016 Fit 2015-2019 HR-V 2016-2019 Insight 2012-2014 Odyssey 2013-2019 Pilot 2014-2019 Passport 2019 Ridgeline 2017-2019.
- Front Bumper Clip, Front Fenders, Front Grille, Front Underbody Spoiler, Upper Resonator Retainer Clip, Rear Bumper, Side Underbody Spoiler, Under Cover Rear Inner Fender, Splash Guard
- These will make your job easier, low-cost solution to a problem that could otherwise have been quite difficult to solve.
- See more on Amazon...
Brand: Rydowenna | Manufacturer: Rydowenna
See On Amazon #6
Nilight 100PCS Front Bumper Push-Type Retainer Clips-91503-SZ3-003 10mm,1PC Bonus Fastener Remover for Honda and Acura
Asin: B096G3Z63Y | Model: BL-45-A | PartNumber: BL-45-A | Ean: 0750139062638 | UPC: 750139062638
【Sturdy And Durable】 - Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use.
【Package Include】 - 100Pcs Nylon Fastener Rivet Clips+1Pc Bonus Fastener Remover.2 Years Warranty Honored By Nilight.
【Widely Use】 - Commonly Used For Fitting Side Skirt, Bumper, Car Fender, Door Trim Panel, Interior Trim Panel And Various Trim Panels. They Can Be Used On Cars, Truck, Motorcycles, Buses, Trains, Planes, Caravans, Etc..
【The Same Size & Shape As Original】 - Head Diameter: 20Mm, Stem Length: 13Mm.Fits Into 10Mm Hole.These Universal Push-Type Fastener Clips Will Fit On Most Of Auto Parts With 10Mm Hole, Hold Your Parts Very Tightly..
Features
- HIGHER QUALITY REPLACEMENT - Replaces Acura & Honda : 91503-SZ3-003
- THE SAME SIZE & SHAPE AS ORIGINAL - Head Diameter: 20mm, Stem Length: 13mm.Fits Into 10mm Hole.These universal push-type fastener clips will fit on most of auto parts with 10mm hole, hold your parts very tightly.
- STURDY AND DURABLE - Made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use
- WIDELY USE - Commonly used for fitting side skirt, bumper, car fender, door trim panel, interior trim panel and various trim panels. They can be used on cars, truck, motorcycles, buses, trains, planes, caravans, etc.
- PACKAGE INCLUDE - 100PCS Nylon Fastener Rivet Clips+1PC Bonus Fastener Remover.2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 0.30 x 8.00 x 4.00 inches
Warranty: 2 Years Warranty
See On Amazon #7
BESULEN 20 Pcs Front Fender Bumper Cover Clips, Fender Liner Retaining Clip with Pin, Nylon Retainer Clip Fasteners Kit for Car, Compatible with OEM 47749-58010 53879-58010
Asin: B0CDBSPN65 | Model: Front Fender Bumper Cover Clip | PartNumber: Front Fender Bumper Cover Clip
【Product Size】: Pin Head Diameter: 0.59"/15Mm, Stem Length: 0.98"/25Mm; Clip Width: 0.98"/25Mm, Length: 1.38"/35Mm. Note: Even Though The Product Description States They Will Fit Your Vehicle. Measure The Dimension Of The Space The Fastener Is Going Into Before Ordering These Clips..
【What You Receive】: The Package Includes 20*Bumper Cover Pin Retainer And 20*Fender Liner Retaining Clip. Enough Quantity To Meet Your Daily Needs. You Can Also Share Them With Your Lover, Families, Friends, Colleagues And So On. It Is An Ideal Festival Or Birthday Gift Choice..
【Large Compatibility】: Fits 2004-2006 Es330, 2007 Es350, 2006 Gs300, 2007 Gs350, 2006-2007 Gs430, 2007 Gs450h, 2010-2021 Gx460, 2003-2009 Gx470, 2006-2007 Is250, 2006-2007 Is350, 2003-2005 Ls430, 2008-2021 Lx570..
【Fitment Type】: Fits 2013-2016 Tc, 2008-2014 Xb, 2003-2021 4Runner, Etc. Car Front Fender Bumper Cover Clips Kit Is Great Replacement For Old Plastic Part. They Are Exactly What You Need To Retain Your Vehicle Front Fender..
Features
- High-Grade Material : These front fender bumper cover clips are made of high-quality nylon material which are durable and anti-collision to offer you a long service time. What's more, they are lightweight and won't break or break easily during use.
- Fitment Type : Fits 2013-2016 tC, 2008-2014 xB, 2003-2021 4Runner, etc. Car front fender bumper cover clips kit is great replacement for old plastic part. They are exactly what you need to retain your vehicle front fender.
- Product Size : Pin Head Diameter: 0.59/15mm, Stem Length: 0.98/25mm; Clip Width: 0.98/25mm, Length: 1.38/35mm. Note: Even though the product description states they will fit your vehicle. Measure the dimension of the space the fastener is going into before ordering these clips.
- Large Compatibility : Fits 2004-2006 ES330, 2007 ES350, 2006 GS300, 2007 GS350, 2006-2007 GS430, 2007 GS450h, 2010-2021 GX460, 2003-2009 GX470, 2006-2007 IS250, 2006-2007 IS350, 2003-2005 LS430, 2008-2021 LX570.
- What You Receive : The package includes 20*bumper cover pin retainer and 20*fender liner retaining clip. Enough quantity to meet your daily needs. You can also share them with your lover, families, friends, colleagues and so on. It is an ideal festival or birthday gift choice.
- See more on Amazon...
Brand: BESULEN | Manufacturer: BESULEN
Dimensions: 0.20 x 0.40 x 0.30 inches | Weight: 0.02 Pounds
See On Amazon #8
Kutyun 2PCS Car Bumper Clips, Bumper Quick Release, Front Rear Bumper Fastener Kit, Durable Carbon Fiber Car Bumper Security Hook Lock Clips, Universal Car Accessories Fit for Car Bumper (Small)
Asin: B0CQP4261M | Model: qph0102 | PartNumber: qph0102
[Quick Release] : Our Front Rear Bumper Fastener Kit Has A Built-In Spring That Allows It To Be Removed Quickly, Easily And Frequently Without The Need For Any Tools. The Bumper Quick Release Keeps The Panel, Trunk, Tailgate, Hatch And Bumper Tightly Together, Reducing Replacement Costs And Making It The Most Economical And Straightforward Way To Maintain Your Car..
[Decorative Function]: Auto Bumper Clip Hasp Is Also A Good Decoration, The Metal Highlight Surface Is Printed With Carbon Fiber Pattern, Excellent Texture, Stylish Appearance Highlights Young, Sports Atmosphere, As A Little Ornament On The Appearance Of The Car Is Perfect..
[Easy To Use]: The Bumper Security Kook Lock Clips Comes With A Back Adhesive, Which Can Be Easily Affixed To The Car Body, Easy Installation, And Does Not Require Drilling Or Any Tools..
[Universal Fit]: The Bumper Holder Clip Can Be Applied To The Front And Rear Bumpers, Trunk, Panel, Hatch, Hood And Other Positions. It Is Universal Fasteners Fenders Holders Kit Fit For Most Vehicles, Including Cars, Suvs, Trucks, Rv And So On..
Features
- [High quality material]: This car truck hook lock clip is made of high quality metal materials, excellent production technology, high strength, stable structure, high hardness, wear resistance, corrosion resistance, rust resistance, impact resistance, not easy to deformation, with a long service life. Our auto bumper clip hasp is ideal for you.
- [Universal fit]: The bumper holder clip can be applied to the front and rear bumpers, trunk, panel, hatch, hood and other positions. It is universal fasteners fenders holders kit fit for most vehicles, including cars, SUVs, trucks, RV and so on.
- [Quick release] : Our front rear bumper fastener kit has a built-in spring that allows it to be removed quickly, easily and frequently without the need for any tools. The bumper quick release keeps the panel, trunk, tailgate, hatch and bumper tightly together, reducing replacement costs and making it the most economical and straightforward way to maintain your car.
- [Easy to use]: The bumper security kook lock clips comes with a back adhesive, which can be easily affixed to the car body, easy installation, and does not require drilling or any tools.
- [Decorative function]: Auto bumper clip hasp is also a good decoration, the metal highlight surface is printed with carbon fiber pattern, excellent texture, stylish appearance highlights young, sports atmosphere, as a little ornament on the appearance of the car is perfect.
- See more on Amazon...
Brand: Kutyun | Manufacturer: Kutyun
Dimensions: 0.90 x 4.10 x 1.20 inches
See On Amazon #9
GOOACC 130PCS Car Bumper Retainer Clips & Nylon Fasteners Push Retainer Kit 6 Most Popular Sizes with 1 Fastener Remover Car Fender Replacement for Honda
Asin: B0BS9G315V | Model: GRC-135 | PartNumber: GRC-135 | Ean: 0840323902274 | UPC: 840323902274
【Great Material】- These Bumper Clips Are Made Of High-Quality Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use.
【Pakage Included】- 30Pcs Fender Apron Grommet (Fits Into 8Mm Square Hole),20Pcs Fender Push-Type Retainer, 20Pcs Bumper And Wheel Well Liner Push-Type Retainer, 20Pcs Front Fender Push-Type Retainer, 20Pcs Front Bumper Push-Type Retainer With Internal Metal Insert, 20Pcs Bumper & Splash Shield Push-Type Retainer With Metal Insert And 1Pc Fastener Remover.
【Bonus Fastener Remover】- The Fastener Remover Is Corrosion-Resistant And Is Made Of Chrome Plated Carbon Steel. The Ergonomic Strong Handle Allows Safe Removal Of Metal Or Plastic Clips..
【Widely Application】- Widely Used For Trim Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Clips, Engine Cover And Splash Shield Retainers Replacement. It Always Covers Some Applications Include Telecom Equipment, Motor Vehicles, Domestic Appliances, Furniture And Electrical Equipment.
Features
- Fits Most Popular Makes And Models - 90682-SEA-003 91501-TR0-003 91505-TM8-003 91512-SX0-003 91505-S9A-003 91506-S9A-003
- Widely Application - Widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment
- Great Material - these bumper clips are made of high-quality nylon material, anti-wear and anti-corrosion, would not break or crack easily during use
- Bonus Fastener Remover - The fastener remover is corrosion-resistant and is made of chrome plated carbon steel. The ergonomic strong handle allows safe removal of metal or plastic clips.
- Pakage Included - 30Pcs Fender Apron Grommet (Fits Into 8mm Square Hole),20Pcs Fender Push-Type Retainer, 20Pcs Bumper and Wheel Well Liner Push-Type Retainer, 20Pcs Front Fender Push-Type Retainer, 20Pcs Front Bumper Push-Type Retainer With Internal Metal Insert, 20Pcs Bumper & Splash Shield Push-Type Retainer With Metal Insert and 1PC Fastener Remover
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 1.77 x 9.21 x 8.46 inches
Warranty: 2 years warranty
See On Amazon #10
100PCS Bumper Clips for Honda - Front Bumper Clips Fit for Honda Acura Accord Civic CR-V, Fits Bumper and Fender Body Retainer Clips with Fastener Remover, Replace - 91503-SZ3-003
Asin: B0CYTGNDP2 | Ean: 0768561668960 | UPC: 768561668960
【Multi-Funtional】►►For Honda Bumper Clips Commonly Used For Fitting Side Skirt, Bumper, Car Fender, Door Trim Panel, Interior Trim Panel And Various Trim Panels. They Can Be Used On Cars, Truck, Motorcycles, Buses, Trains, Planes, Caravans, Etc.
【Good Customer Service】➤➤We Take Highly Value Customers' Satisfaction And Tolerate Zero Quality Issue. If For Any Reason You're Not 100% Satisfied With Our For Honda Clips And Fasteners, Please Let Us Know And Our Customer Service Team Will Help You Return Or Refund.
【Package Included】►►100 Pcs For Honda Push Pins, 1Pcs Fastener Remover.
【Premium Material For Better Durability】►►For Honda Body Clips Made Of High Quality Nylon Plastic Material, Wear Resistant And Corrosion Resistant. Nylon For Honda Plastic Push Pins Is Easy To Install And Remove, And Fastener Remover Is A Perfect Fit.
Features
- Muti-Model Compatibility for honda clips Compatible with Honda Accord, Civic, CR-V, CR-Z, Element, Odyssey, Pilot, Ridgeline, Acura etc. Replaces Acura & Honda : 91503-SZ3-003
- Premium Material for Better Durability for honda body clips made of high quality nylon plastic material, wear resistant and corrosion resistant. Nylon for honda plastic push pins is easy to install and remove, and fastener remover is a perfect fit
- Multi-funtional for honda bumper clips Commonly used for fitting side skirt, bumper, car fender, door trim panel, interior trim panel and various trim panels. They can be used on cars, truck, motorcycles, buses, trains, planes, caravans, etc
- Package Included 100 Pcs for honda push pins, 1Pcs fastener remover
- Good Customer Service We take highly value customers' satisfaction and tolerate zero quality issue. If for any reason you're not 100% satisfied with our for honda clips and fasteners, please let us know and our customer service team will help you return or refund
- See more on Amazon...
Brand: TECARATE | Manufacturer: TECARATE
Dimensions: 0.98 x 0.79 x 0.79 inches
See On Amazon #11
Lantee 40 Pcs Front Bumper Retainer Clips for 91503-SZ3-003 - Fit for Honda Accord Civic CRV CRX Del Sol Element Insight Odyssey Pilot Prelude Ridgeline, Fit for Acura CL Integra MDX RDX RL RSX TL TSX
Asin: B01LXF0O7W | Model: LTC11 | PartNumber: LTC11 | Ean: 0700697250497 | UPC: 700697250497
Great For Front Bumper, Fender Or Inner Panels.
Package Included: 40 X 10Mm Lantee Car Clips.
Head Diameter:20Mm, Stem Length:13Mm, Fits Hole Size:10Mm.
Fit For Acura 1997-2003 Cl, 1996-2001 Integra, 2001-2012 Mdx, 1997-2005 Nsx, 1996-2012 Rl, 2002-2006 Rsx, 1997-2012 Tl, 2004-2012 Tsx, 2010-2012 Zdx.
Features
- Fit for Honda 1997-2007 Accord, 1997-2007 Civic, 1999-2007 CR-V, 2003-2007 Element, 2007 Fit, 2000-2006 Insight, 1996-2007 Odyssey, 2003-2007 Pilot, 1997-2001 Prelude, 2000-2007 S2000, 2006-2007 Ridgeline
- Fit for Acura 1997-2003 CL, 1996-2001 Integra, 2001-2012 MDX, 1997-2005 NSX, 1996-2012 RL, 2002-2006 RSX, 1997-2012 TL, 2004-2012 TSX, 2010-2012 ZDX
- Great for front bumper, fender or inner panels
- Head Diameter:20mm, Stem Length:13mm, Fits Hole Size:10mm
- Package included: 40 x 10mm Lantee car clips
- See more on Amazon...
Brand: Lantee | Manufacturer: Lantee
Weight: 0.03 pounds
See On Amazon #12
Bumper Quick Release, Mellbree Quick Release Trunk Front Rear Bumper Fasteners Fenders Holders Kit Compatible for Universal Car Bumper (Color 4 x Quick Release Tabs with 12 x O-Ring Fastener
Asin: B09BN6224C
Custom Rubber: Customized Nitrile Rubber (Nbr) Is Used To Bid Farewell To Ordinary Rubber That Breaks When It Is Used, And Melts When Exposed To The Sun. The O-Rings We Use Have Strong Wear Resistance And Excellent Heat Resistance. Compared With Other Rubbers, Nbr Has A Wider Range Of Operating Temperatures. Because The Rubber Ring Is Always A Consumable, We Have Added An Additional 10X Fixing Ring, Just To Facilitate Your Daily Use..
The Package Contains: 4 X Color Bumper Quick Release Tabs, 4 X Stainless Steel Bolts, 4 X Nuts, 4 X Washers, 12 X Customized Nitrile Rubber (Nbr) O-Rings (10 For Replacement Use).
What You Get: Mellbree Bumper Quick Release, If There Is Any Dissatisfaction With The Product, Or The Parts Are Missing, Please Contact Us At Any Time..
Aluminum Alloy Quick Release Bumper Fasteners Ensure The Stability In Use. As A Common Structural Material In Auto Parts, Its Excellent Hardness And Strength Make You More At Ease In Use..
Quickly Remove：1. Take Out The Bumper Quick Release Fasteners And O-Rubber Ring First, And Lift The Bumper To The Position You Want. 2. Then Mark The Desired Hole Position On The Mudguard. 3. Taking Into Account The Elasticity Of Rubber, The Spacing Can Be Slightly Shortened To Achieve A Tightly Symmetrical Effect. The Quick Release Bumper Fasteners Kit Has A Complete Set Of Supporting Parts, Which Makes It Very Convenient For You To Install And Use In The Future..
Features
- Best choice: Aluminum bumper fasteners can help you solve the problem of easily re-fixing the car bumper after it falls off; it supports quick, easy and frequent disassembly of the front bumper and rear bumper; of course, it is also an excellent embodiment of your fashion style. Full set of stainless steel screws and nuts upgrade model
- Quickly remove 1. Take out the bumper quick release fasteners and O-rubber ring first, and lift the bumper to the position you want. 2. Then mark the desired hole position on the mudguard. 3. Taking into account the elasticity of rubber, the spacing can be slightly shortened to achieve a tightly symmetrical effect. The quick release bumper fasteners kit has a complete set of supporting parts, which makes it very convenient for you to install and use in the future.
- Custom rubber: Customized nitrile rubber (NBR) is used to bid farewell to ordinary rubber that breaks when it is used, and melts when exposed to the sun. The O-rings we use have strong wear resistance and excellent heat resistance. Compared with other rubbers, NBR has a wider range of operating temperatures. Because the rubber ring is always a consumable, we have added an additional 10X fixing ring, just to facilitate your daily use.
- Aluminum alloy quick release bumper fasteners ensure the stability in use. As a common structural material in auto parts, its excellent hardness and strength make you more at ease in use.
- The package contains: 4 x Color bumper quick release tabs, 4 x Stainless steel bolts, 4 x Nuts, 4 x Washers, 12 x Customized nitrile rubber (NBR) O-Rings (10 for replacement use)
- What You Get: Mellbree bumper quick release, If there is any dissatisfaction with the product, or the parts are missing, please contact us at any time.
- See more on Amazon...
Brand: Mellbree | Manufacturer: Mellbree
See On Amazon #13
BXZ Front Bumper Cover Support Bracket Retainer Mount Pair RH LH Fit for 2016-2023 Chevy Malibu
Asin: B0CLJJPNB8 | Model: BXZ | PartNumber: BXZ
2 Pieces Include.Passenger Right Side And Driver Left Side..
Compatible With Mailbu Ls,Lt,Rs,L,Premier,Hybrid Sedan Model..
Made Of High Quality Plastic And Metal With 1 Year Warranty..
Fit For Chevrolet Malibu 2016 2017 2018 2019 2020 2021 2022 2023..
Features
- 100% new unused replacement part for 84081023,GM1042137,84650637, 84081022,GM1043137,84650636.
- Fit For Chevrolet Malibu 2016 2017 2018 2019 2020 2021 2022 2023.
- 2 pieces include.Passenger right side and driver left side.
- Made of high quality plastic and metal with 1 year warranty.
- Compatible with mailbu LS,LT,RS,L,Premier,Hybrid sedan model.
- See more on Amazon...
Brand: BXZ | Manufacturer: BXZ
Dimensions: 2.80 x 6.80 x 2.30 inches
Warranty: 12 Months
See On Amazon #14
BXZ Front Bumper Insert Fog Light Lamp Cover Bezel Right RH Passenger Fit For Ford Fusion 2019 2020
Asin: B0CH6BW8NL
1Pcs Rh Right Passenger Side Cover Include..
365 Days Warranty..
Made Of High Quality Plastic With Matte Black Finish..
Complete Oe Replacement Part For Fo1039182,Ks7z*17B814*Aa, Fo1039182c, Fo1039182d, Fo1039182dsc, Fo1039182n, Fo1039182p..
Features
- 100% new unused fog light lamp cover fit for ford fusion 2019 2020.
- Complete OE replacement part for FO1039182,KS7Z*17B814*AA, FO1039182C, FO1039182D, FO1039182DSC, FO1039182N, FO1039182P.
- 1pcs RH Right Passenger side cover include.
- Made of high quality plastic with matte black finish.
- 365 days warranty.
- See more on Amazon...
Brand: BXZ | Manufacturer: BXZ
See On Amazon #15
Mean Mug Auto 81514-663A 50x Front Fender Bumper Push Type Retainer Clips - Compatible with Honda, GM, Ford, Mitsubishi - Replaces OEM #: 91512-SX0-003, MU000319, 11519949, W711712-S300
Asin: B08L71M5HP | Model: Honda-Clips | PartNumber: Honda-Clips | Ean: 0096259112502 | UPC: 096259112502
Compatible With Acura And Mitsubishi : Cl 2001-2003, Ilx 2013-2014, Legend 1995, Integra 1994-2010, Tl 1995-2014, Rl 1996-2012, Rlx 2014-2015, Mdx 2001-2015, Rsx 2002-2006, Tsx 2004-2014, Rdx 2007-2010, Zdx 2010-2013; Compatible With Mitsubishi : Lancer 2002-2005, Outlander 2017-2019, Outlander 2008-2009, Outlander Sport 2011-2015.
Package Include : 50X Front Fender Bumper Push Type Retainer Clips For 8Mm Hole, With 3-Year Warranty.
Replacement Oem Number : 91512-Sx0-003, Mu000319, 11519949, W711712-S300 Are The Replacement Oem Number For These Plastic Rivet Clips. They Can Be Used As : Windshield Washer Clips, Fuel Tank Clips, Front Grille Clips, Engine Hood Clips, Front Fender Push-Type Retainer, Splash Shield Retainer Clip.
Compatible With Honda : Odyssey 1995-2018, Pilot 2003-2018, Prelude 1995-2001, Accord 1996-2018, Civic 2003-2018, Crosstour 2010-2015, Cr-V 1997-2018, Cr-Z 2011-2016, Ridgeline 2006-2018, S2000 2000-2009, Element 2003-2011, Fit 2007-2017, Fit Ev 2013-2014 ,Hr-V 2016, Insight 2010-2014.
Features
- Size and Quality : These are Precision-Engineered to push firmly into a 8 mm hole and lock into place with their push-type design. They are ready to fit snuggly into your vehicle with their 11 mm stem length and 20 mm head diameter. Material is Non-Corrosive and Anti-Wear which gives them long life.
- Compatible with Honda : Odyssey 1995-2018, Pilot 2003-2018, Prelude 1995-2001, Accord 1996-2018, Civic 2003-2018, Crosstour 2010-2015, CR-V 1997-2018, CR-Z 2011-2016, Ridgeline 2006-2018, S2000 2000-2009, Element 2003-2011, Fit 2007-2017, Fit EV 2013-2014 ,HR-V 2016, Insight 2010-2014
- Compatible with Acura and Mitsubishi : CL 2001-2003, ILX 2013-2014, Legend 1995, Integra 1994-2010, TL 1995-2014, RL 1996-2012, RLX 2014-2015, MDX 2001-2015, RSX 2002-2006, TSX 2004-2014, RDX 2007-2010, ZDX 2010-2013; Compatible with Mitsubishi : Lancer 2002-2005, Outlander 2017-2019, Outlander 2008-2009, Outlander Sport 2011-2015
- Replacement OEM Number : 91512-SX0-003, MU000319, 11519949, W711712-S300 are the replacement OEM number for these plastic rivet clips. They can be used as : Windshield Washer Clips, Fuel Tank Clips, Front Grille Clips, Engine Hood Clips, Front Fender Push-Type Retainer, Splash Shield Retainer Clip
- Package Include : 50x Front Fender Bumper Push type Retainer clips for 8mm Hole, with 3-Year Warranty
- See more on Amazon...
Brand: Mean Mug Auto | Manufacturer: Mean Mug Auto
Warranty: You have 60 days, from the date of purchase, to return your Mean Mug Auto part for a full refund. 3-Year Warranty: We’ll repair or replace your auto part if determined to be defective in material or workmanship. This warranty does not cover damage caused by misuse, abuse, negligent handling, or normal wear of parts.
See On Amazon #16
BXZ Front Bumper Bracket Cover Support Mount Retainer Pair For Toyota Corolla 2019 2020 2021
Asin: B08BJ52RH6 | Model: BXZ | PartNumber: BXZ | Ean: 0783970030313 | UPC: 783970030313
Replace For Part Number Length To1043131c 52115-02350 To1042131 52116-02330..
Fit For Le Se Xle Xse L Le Hybrid Hatchback Sedan Model..
Made Of High Quality Plastic With 365 Days Warranty..
2 Pieces Include.Passenger Right Side And Driver Left Side..
Features
- 100% new front bumper cover mount support bracket for 2019 2020 2021 toyota corolla.
- 2 pieces include.Passenger right side and driver left side.
- Replace for part number Length TO1043131C 52115-02350 TO1042131 52116-02330.
- Made of high quality plastic with 365 days warranty.
- Fit for LE SE XLE XSE L LE Hybrid Hatchback Sedan model.
- See more on Amazon...
Brand: BXZ | Manufacturer: BXZ
Warranty: 1 year
See On Amazon #17
Ajxn 35 PCS Under Engine Cover Splash Guard Bolts, Car Bumper Fender Lining Rivets Nylon Push Clips, Push Metal U-Clip Retainers, Product Compatible with Cars, Trucks, Vans, SUVs, Trailers (Black)
Asin: B0CGMVCG9P | Model: AJDDQ905BL-35PS | PartNumber: AJDDQ905BL-35PS
Widely Used: Under Engine Cover Splash Guard Body Bolt Hardware Kit Ensures Safe And Secure Connection Of Engine And Body Parts, Widely Used In Trim Panel Door, Trim Door Panel Bumper, Car Fender Flare, Engine Cover, Fender..
Packing Content: You Will Receive 15 Black Car Hood Guard Bolts, 10 Black Extruded U-Shaped Retainers, 10 Black Nylon Fastener Rivet Push Clips. The Clevis Can Be Used With Bolts, Please Rest Assured To Buy..
Fastener Rivet Push Clamp: When Using Rivet Push Clamp, First Insert The Nylon Fastener Rivet Into The Workpiece Hole To Be Connected. Then, Align The Rivet Push Clips With The Head Of The Rivet And Apply Proper Pressure To Drive The Rivet Into The Workpiece. Finally, Make Sure The Rivet Is Fully Installed And Firmly Attached To The Workpiece..
Hood Guard Bolts: Hood Guard Bolts Are Bolts Used To Secure A Motor Vehicle Hood Guard With Sufficient Strength And Durability To Withstand The Hood Guard Body Fixation And Protection..
Features
- Squeeze U-Retainer: Bumper fender liner push squeeze U-Retainer is a fixing device used to fix the bumper fender liner, which can effectively fix the fender liner and prevent it from loosening or fall off. It provides extra support and stability, protecting the fender liners from bumps and vibrations.
- Hood Guard Bolts: Hood guard bolts are bolts used to secure a motor vehicle hood guard with sufficient strength and durability to withstand the hood guard Body fixation and protection.
- Widely Used: Under engine cover splash guard body bolt hardware kit ensures safe and secure connection of engine and body parts, widely used in trim panel door, trim door panel bumper, car fender flare, engine cover, fender.
- Fastener Rivet Push Clamp: When using rivet push clamp, first insert the nylon fastener rivet into the workpiece hole to be connected. Then, align the rivet push clips with the head of the rivet and apply proper pressure to drive the rivet into the workpiece. Finally, make sure the rivet is fully installed and firmly attached to the workpiece.
- Packing Content: You will receive 15 black car hood guard bolts, 10 black extruded U-shaped retainers, 10 black nylon fastener rivet push clips. The clevis can be used with bolts, please rest assured to buy.
- See more on Amazon...
Brand: Ajxn | Manufacturer: Ajxn
See On Amazon #18
G-PLUS Front Bumper Retainer Compatible with Ford Fusion 2013-2016 Front Bumper Retainer Mounting Brace Bracket Support Pad Left Right Side DS7Z17C947B DS7Z17C947A
Asin: B07XCTHTW9 | Model: DS7Z17C947A | PartNumber: DS7Z17C947A
Oem ( Original Equipment Part) Number: Ds7z17c947b, Ds7z17c947a, Ds7z 17C947 B, Ds7z 17C947 A, Other Part Number: Fo1032103, Fo1033103.
Quality Service: Our Front Bumper Retainer Have A One-Year Warranty, Please Buy With Confidence. Professional Installation Is Highly Recommended. If You Have Any Questions, Please Feel Free To Contact..
Easy Installation: Direct Replacement, Easy Installation. Professional Installation Is Highly Recommended.
Premium: The Front Bumper Bracket Are Made Of High Quality Abs Plastic Materials. Package Includes: Right Passenger & Left Driver Side, Oe Replacement.
Features
- COMPATIBILITY: Front Bumper Retainer Compatible with Ford Fusion 2013 2014 2015 2016.
- PREMIUM: The front bumper bracket are made of high quality ABS plastic materials. Package Includes: Right Passenger & Left Driver Side, OE Replacement
- OEM ( Original Equipment Part) Number: DS7Z17C947B, DS7Z17C947A, DS7Z 17C947 B, DS7Z 17C947 A, Other Part Number: FO1032103, FO1033103
- EASY INSTALLATION: Direct Replacement, easy installation. Professional installation is highly recommended
- QUALITY SERVICE: Our front bumper retainer have a one-year warranty, please buy with confidence. Professional Installation is Highly Recommended. If you have any questions, please feel free to contact.
- See more on Amazon...
Brand: G-PLUS | Manufacturer: Gplusmotor
Dimensions: 3.55 x 8.08 x 5.91 inches | Weight: 0.22 Pounds
Warranty: 1 year warranty
See On Amazon #19
OAUTOO 30pcs Bumper Cover Push-Type Retainer Clip 51-11-1-964-186 for BMW 318 320 323 325 328 330 525 528 530 540 550 740 750 M3 M5 X5 Z4 1984-2010
Asin: B0CRRTXJ1X | Ean: 0698746262938 | UPC: 698746262938
Compatible With: Bmw 51-11-1-964-186, 51111964186..
Unit Package: 30 Pieces.
Fits Bmw 318 320 323 325 328 330 525 528 530 540 550 740 750 M3 M5 X5 Z4 1984-2010 (Please Check The Product Description For Compatibility Before Purchase).
Head Diameter: 15Mm, Stem Length: 20Mm, Fits Into 6Mm Hole..
Features
- Black Nylon Bumper Cover Push-Type Retainer Clip
- Head Diameter: 15mm, Stem Length: 20mm, Fits into 6mm Hole.
- Compatible with: BMW 51-11-1-964-186, 51111964186.
- Fits BMW 318 320 323 325 328 330 525 528 530 540 550 740 750 M3 M5 X5 Z4 1984-2010 (Please Check The Product Description for Compatibility Before Purchase)
- Unit Package: 30 Pieces
- See more on Amazon...
Brand: OAUTOO | Manufacturer: OAUTOO
See On Amazon #20
YijieBuyi Bumper Retainer Set Compatible with Base Front Side Cover 2Pc 12751103
Asin: B0C9WHZ81X | Model: EIRA80131-12751103 | PartNumber: EIRA80131-12751103
Location: Left Or Right,Front.
Bundle:Yes.
Part_Number:12751103,5253552131,5253652141,To1088113,To1089113.
Components: (2) Bumper Retainers.
Features
- Fitment:Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!
- Components: (2) Bumper Retainers
- Location: Left or right,Front
- Part_Number:12751103,5253552131,5253652141,TO1088113,TO1089113
- Bundle:Yes
- See more on Amazon...
Brand: YijieBuyi | Manufacturer: YijieBuyi
Warranty: 12 Months
See On Amazon
Looking For Something Else?
Search