120w Flue Fan, Chimney Exhaust Draft Inducer, for Stove Heating Extractor Ventilation Fans
Asin: B0CP7WQ2Z9 | Ean: 1091862808124
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Install, Very Quiet, Suitable For Most Types Of Chimneys, And Does Not Require Professional Technicians To Install. Not Only Will The Smoke Be Discharged Quickly, But It Also Has Excellent Performance..
During Installation Or Removal, Disconnect The Power Supply To Prevent Electric Shock..
The Product's Operating Voltage Is 190-230V, And The Chimney Induced Draft Fan Is Used By Leaving Two Wire Ends To Connect To The Power Source..
The Outlet Temperature Of The Chimney Fan Should Not Exceed 60 Degrees. Otherwise, The Induced Draft Fan Will Be Burned..
Features
- It is very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney. Not only will the smoke be discharged quickly, but it also has excellent performance.
- The outlet temperature of the chimney fan should not exceed 60 degrees. Otherwise, the induced draft fan will be burned.
- Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install. Not only will the smoke be discharged quickly, but it also has excellent performance.
- The product's operating voltage is 190-230v, and the chimney induced draft fan is used by leaving two wire ends to connect to the power source.
- During installation or removal, disconnect the power supply to prevent electric shock.
- See more on Amazon...
Brand: EsaSaM | Manufacturer: EsaSaM
See On Amazon Similar To 120w Flue Fan Chimney Exhaust
#1
Wood Stove Fan, Pipe Fireplace Fan with Magnetic Thermometer, 6 Blades Stove Fan on Chimney, Silent Motors, Push Horizontal Air Flow, Heat Powered Wood Stove Fan for Wood Burning Stove/Gas/Pellet/Log
Asin: B0B8RX282C | Model: BG316 | PartNumber: BG316
【Silent Operation】：Noise Level<25Db.Includes 1 * Thermal Fan; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual..
【Warranty】: Easy To Install. Stove Fans Non Electric Is Guarranteed For 1 Year Or Provide Replacement. The After-Sales Team Will Provide Solutions Within 24 Hours..
【Stove Fan Details】: Speed: 1400Rpm. Weight: 2.2Lb. Work Temp: 106°F-662°F.
【Durability】-The Wood Stove Fan Base And Blade Are Made From Anodized Aluminum Which Is Rust-Proof, Wear-Resisting, With Good Thermal Conductivity..
【Pipe Fireplace Fans】: This New Design Heat Activated Fan Is Suitable For The Uneven Surface Of Fireplace, It Also Can Be Fixed On The Chimney Pipe Of Wood/Log Burner/Fireplace. Pipe Size Is Between 6.1-6.88In..
Features
- Efficient Heat Distribution : Wood Stove fan non electric, Heat powered by wood burning stove, thermal fins convert the absorbed thermal energy into kinetic energy, and when the temperature reaches 212 F, woodstove fans kicks in, diverting the warm air horizontally all around your house. CFM: 160-220.
- Pipe Fireplace Fans : This new design heat activated fan is suitable for the uneven surface of fireplace, it also can be fixed on the chimney pipe of wood/Log burner/fireplace. Pipe size is between 6.1-6.88in.
- Silent Operation Noise level<25db.Includes 1 * Thermal Fan; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual.
- DURABILITY -The wood stove fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity.
- WARRANTY : Easy to install. Stove fans non electric is guarranteed for 1 year or provide replacement. The after-sales team will provide solutions within 24 hours.
- STOVE FAN DETAILS : Speed: 1400rpm. Weight: 2.2lb. Work temp: 106 F-662 F
- See more on Amazon...
Brand: Xmasneed
Dimensions: 6.49 x 5.51 x 6.49 Inches
See On Amazon #2
gohantee 5 Blades Stove Fan Heat Powered Fireplace Fan Hanging on Chimney Pipe for Wood Log Burner Fireplace Slient Efficiently Heat Distribution Eco-Friendly with Thermometer
Asin: B095P1MP7D | Model: stove fan | PartNumber: stove fan
[Space Saving] The Pellet Stove Pipe Fan Heat Powered Easy To Install, Different From Regular Stove Fan, The 5-Blade Stove Fan Can Be Attached Directly To The Chimney Pipe Of The Wood Stove, Log Burner Or Fireplace, Very Stable And Save More Space. Whether It Is Wood Burning Stove, Log Burner Or Fireplace, The Stove Fan Is Very Useful..
[Premium Quality] The Pipe Mounted Wood Stove Fan Made Of Anodized Aluminum, Wear-Resistant And Anti-Rust. Overheating Protection, The Built-In Bimetallic Belt At The Bottom Of The Stove Fan Is Designed To Slightly Raise The Edge Of The Fan When It Is Close To The Maximum Operating Temperature To Protect The Fireplace Fan. A Thermometer Is Included To Measure The Temperature Of The Furnace And Ensure The Safety Of The 5 Blades Stove Fan..
[Silent Operation] Whisper Work, Low Noise. Wood Burning Stove Fan Normal Working Noise Below 25Db. You Can Enjoy The Warm Air In A Quiet And Comfortable Environment..
[Energy Saving] The Stove Pipe Heater Fan Not Need Batteries And Electricity, Make Full Use Of The Heat From The Furnace, Burn Less Fuel, Environmentally Friendly. More Efficiently And Quickly Disperse Heat Throughout Your Room, Allowing Hot Air To Circulate Better Throughout The Room, No Need To Sit So Close To The Stove..
Features
- [WORKING PRINCIPLE] 5 Blades Heat Powered Stove Fan drives the motor by converting the heat energy of the stove into kinetic energy, and then the blades rotate. Fireplace fan working automatically, controlled by temperature of the stove top.When the temperature is above 50 , the fan starts to rotate, and when the temperature is below 50 , the fan slowly stops rotating. When the temperature increases, the fan will spin faster, when the temperature decreases, the fan will spin slower.
- [ENERGY SAVING] The stove pipe heater fan not need batteries and electricity, make full use of the heat from the furnace, burn less fuel, environmentally friendly. More efficiently and quickly disperse heat throughout your room, allowing hot air to circulate better throughout the room, no need to sit so close to the stove.
- [SPACE SAVING] The pellet stove pipe fan heat powered easy to install, different from regular stove fan, the 5-blade stove fan can be attached directly to the chimney pipe of the wood stove, log burner or fireplace, very stable and save more space. Whether it is wood burning stove, log burner or fireplace, the stove fan is very useful.
- [SILENT OPERATION] Whisper work, low noise. Wood burning stove fan normal working noise below 25db. You can enjoy the warm air in a quiet and comfortable environment.
- [PREMIUM QUALITY] The pipe mounted wood stove fan made of anodized aluminum, wear-resistant and anti-rust. Overheating protection, the built-in bimetallic belt at the bottom of the stove fan is designed to slightly raise the edge of the fan when it is close to the maximum operating temperature to protect the fireplace fan. A thermometer is included to measure the temperature of the furnace and ensure the safety of the 5 blades stove fan.
- See more on Amazon...
Brand: gohantee | Manufacturer: gohantee
Dimensions: 5.91 x 7.87 x 7.87 inches | Weight: 1.96 pounds
See On Amazon #3
PYBBO Heat Powered Wood Chimneys Stove Fan, Pipe Fireplace Fan, 5 Blades Stove Fan, Silent Operation Motors Winter Cocoon Stove Fan for Wood Burning Stove/Pellet/Log with Magnetic Thermometer
Asin: B0BZSC8W49 | Model: 5B-Pipe-new | PartNumber: 5B-Pipe-new
Silent Operation, Spread Heat Around Room And Increase Temperature With Low Noise. The Moving Part Is The Blades Assembly, So The Working Noise Is Below 32Db. It Will Not Interrupt Your Reading, Work, And Other Activities. More Stable And Environmental Protection.
When The Temperature Reaches 212°F, Woodstove Fans Works Great Cfm: 160-220. If The Fan Doesn't Run In Time After Reaching The Temperature, Please Move The Blade Slightly (Please Do Not Touch It Directly With Your Hands). Please Test The Temperature Of The Fireplace Before Purchase And Pay Attention To Monitoring The Temperature Change During Use.
Overheating Protection, The In-Built Bi-Metallic Strip At The Base Of The Stove Fan Is Designed To Raise The Edge Of The Fan Slightly As The Maximum Operating Temperature Is Approached To Protect The Motor And The Moelectric Module. The Stove Fan Can Withstand 65-350 ℃(149-660℉) And Keep Working.
No Batteries Or Mains Electricity Required, The Thermoelectric Module Acts As A Small Generator To Power The Fan's Motor. The Fan Base And Blade Are Made From Anodized Aluminum Which Is Rust-Proof, Wear-Resisting, With Good Thermal Conductivity.
Features
- The stove fan can be fixed on the chimney Pipe of Wood/Log Burner/Fireplace, this new design heat activated fan is suitable for the uneven surface of fireplace and won't take up more space. Improve hot air circulation for greater comfort , and reduce 30% wood costs
- No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
- Silent operation, spread heat around room and increase temperature with low noise. The moving part is the blades assembly, so the working noise is below 32DB. It will not interrupt your reading, work, and other activities. More stable and environmental protection
- Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module. The stove fan can withstand 65-350 (149-660 ) and keep working
- When the temperature reaches 212 F, woodstove fans works great CFM: 160-220. If the fan doesn't run in time after reaching the temperature, please move the blade slightly (Please do not touch it directly with your hands). Please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use
- See more on Amazon...
Brand: PYBBO
Dimensions: 7.80 x 6.30 x 4.70 inches
See On Amazon #4
BTURYT Chimney Fan Chimney Smoke Evacuator, Fireplace Exhaust Fan Flue Fan Chimney Draft Inducer Chimney Exhaust Fan for Fireplace,80W
Asin: B0CPJ67QYH | Model: home | PartNumber: home | Ean: 4784283058113
* Chimney Fan Is For Use Where Flue Gas Temperatures Do Not Exceed 575° F For Intermittent Operation, And 482° F For Continuous Operation.Otherwise, The Induced Draft Fan Will Be Burned..
* Easy To Install, Very Quiet, Suitable For Most Types Of Chimneys, And Does Not Require Professional Technicians To Install. Not Only Will The Smoke Be Discharged Quickly, But It Also Has Excellent Performance..
* Note - The Operating Voltage Of The Product Is 220V( 110V-120V Voltage, We Will Be Equipped With A Voltage Converter), And The Chimney Induced Draft Fan Is Used By Leaving Two Ends Of The Wire For Connection To The Power Source..
* 80W Chimney Fan For Flue Diameter 13.5-21Cm,100W And 120W Chimney Fan For Flue Diameter 19-25.5Cm..
Features
- * It is very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney.
- * 80W Chimney Fan for Flue Diameter 13.5-21cm,100W and 120W Chimney Fan for Flue Diameter 19-25.5cm.
- * Chimney Fan is for use where flue gas temperatures do not exceed 575 F for intermittent operation, and 482 F for continuous operation.Otherwise, the induced draft fan will be burned.
- * NOTE - The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), and the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
- * Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install. Not only will the smoke be discharged quickly, but it also has excellent performance.
- See more on Amazon...
Brand: BTURYT | Manufacturer: BTURYT
See On Amazon #5
Chimney Fan Fireplace Exhaust Fan Flue Fan Chimney Draft Inducer Chimney Exhaust Fan For Fireplace Professional Model 110 V Barbecue BBQ Gemi Elettronica
Asin: B00NQY50UM | Model: EggPan#7792614 | PartNumber: EggPan#7792614 | Ean: 8053017260167 | UPC: 978020137962
Up To 3800 M³ / H (With 6-Speed Regulator).
Universal (For Any Type Of Chimney).
Super Recommended In Case Of Exposure To Salt And High Temperatures.
6 Years Warranty.
Features
- Withstands up to 700 C (even in the event of a chimney fire)
- 6 Years Warranty
- Up to 3800 m / h (with 6-speed regulator)
- Super Recommended in case of exposure to salt and high temperatures
- Universal (for any type of chimney)
- See more on Amazon...
Brand: Gemi Elettronica | Manufacturer: Gemi Elettronica
Dimensions: 19.69 x 19.69 x 19.69 inches | Weight: 39.68 Pounds
See On Amazon #6
gohantee 10-Blade Dual Head Heat Powered Wood Stove Fan Mini Flue Pipe Hanging Fireplace Fan Furnace Air Blower for Wood/Log Burner/Fireplace/Silent Indoor Stove Eco Friendly Fan with Thermometer
Asin: B0B9R216P9 | Model: Hanging Heat Powered Stove Fan | PartNumber: Hanging Heat Powered Stove Fan
[Quiet And Space-Saving] The Stove Fan Can Be Fixed To The Chimney Pipe Of A Wood/Log Burner/Fireplace. It Is Stable Against Sloping Surfaces And Does Not Take Up Any More Space. The Only Moving Part Is The Blade Assembly, Which Is Quiet And Makes Noise No More Than 25 Db. You Won't Even Know The Fan Is There On This Wood Cooker, But You Will Feel The Warmth..
[Service Gurantee] Package Includes: 1 Pc X Dual Head 10-Blade Stove Fan, 2 Pcs X Iron Rings, 1Pc X Thermometer. If You Have Any Questions Or Concerns, Please Feel Free To Contact Us..
[Product Feature] The Non-Electric Fan For Wood Cookers Is Made Of Aluminium. The Fan Measures 9.25 X 7.08 X 5.90 Inches (235 X 180 X 150 Mm). This Small Stove Fan Has Two Motors And The Higher The Temperature The Faster The Fan Blades Turn, Spreading The Warm Air Perfectly Throughout The Room..
[Energy Saving] The Thermoelectric Stove Fan Automatically Starts To Operate When The Cooker Temperature Reaches 50°C. You Will Enjoy The Warm Air And Use Less Wood, Eco-Friendly And Efficient. Note: The Thermoelectric Stove Fan Operates At 122°F - 662°F (50°C - 350°C) And Temperatures Above This Range May Damage The Fan And Generator Set..
Features
- [WORKING PRINCIPLE] No batteries or electricity needed! The hot air stove fan generates electricity by converting the heat from the cooker into electricity. The electricity generator converts the heat energy into kinetic energy to drive the motor, which then rotates the blades. The thermoelectric module acts as a small generator to power the fan motor. The hot air produced by the wood/coal stove or pellet fuel can be circulated very well.
- [ENERGY SAVING] The thermoelectric stove fan automatically starts to operate when the cooker temperature reaches 50 C. You will enjoy the warm air and use less wood, eco-friendly and efficient. Note: the thermoelectric stove fan operates at 122 F - 662 F (50 C - 350 C) and temperatures above this range may damage the fan and generator set.
- [QUIET AND SPACE-SAVING] The stove fan can be fixed to the chimney pipe of a wood/log burner/fireplace. It is stable against sloping surfaces and does not take up any more space. The only moving part is the blade assembly, which is quiet and makes noise no more than 25 DB. You won't even know the fan is there on this wood cooker, but you will feel the warmth.
- [PRODUCT FEATURE] The non-electric fan for wood cookers is made of aluminium. The fan measures 9.25 x 7.08 x 5.90 inches (235 x 180 x 150 mm). This small stove fan has two motors and the higher the temperature the faster the fan blades turn, spreading the warm air perfectly throughout the room.
- [SERVICE GURANTEE] Package includes: 1 Pc x Dual Head 10-Blade Stove Fan, 2 Pcs x Iron Rings, 1Pc x Thermometer. If you have any questions or concerns, please feel free to contact us.
- See more on Amazon...
Brand: gohantee | Manufacturer: gohantee
Dimensions: 9.25 x 7.08 x 5.90 inches | Weight: 2.20 Pounds
See On Amazon #7
TEENGSE Heat Powered 8 Blade Wood Stove Fan, Flue Pipe Hanging Fireplace Fan for Home Wood Burning Stove Silent Indoor Stove Accessory Heat Distribution-Black with Magnetic Thermometer
Asin: B0995L1D4B | Model: Fireplace Fan | PartNumber: Fireplace Fan | Ean: 0752349338626 | UPC: 752349338626
★[Longer Working Life]: The Whole Wood Burning Stove Fan Is Made From Anodized Aluminum, Which Is Rust-Proof, Wear-Resisting, With Good Thermal Conductivity ,Not Be Deformed Or Discoloured And Can Withstand High Temperatures Up To 752°F (400°C). The Heat-Powered Stove Fan Has A Higher Thermal Conductivity Efficiency Than Those Steel Ones..
★[Space-Saving And Silent-Operating]:The Stove Fan Can Be Fixed On The Chimney Pipe Of Wood/Log Burner/Fireplace, Stable For Incline Surface And Won't Take Up More Space.And There Is Almost Whisper When Operating.Don't Worry Being Disturpted..
★[Package Includes]: 1 * Double Head Fireplace Fan ; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual;.
★[Larger Air Flow]: This Upgraded Little Stove Fan Have Two Motor, Diffusing Warm Air Throughout The Whole Room Perfectly.Continuously Bring Most Comfortable And Stable Warmth..
★[Working Principle]:By Converting Heat Into Electrical Energy,The Heat Powered Stove Fan Will Automatically Start Working When The Surrounding Reach Certain Tempreture, Accelerating Warm Air Flowing.No Batteries Or Electricity Needed! The Improved Hot Air Circulation Ensures Greater Comfort ,While The Wood Used For The Stove Can Be Reduced By About 40%..
Features
- [NOTE]: The maximum diameter of the clamps is 6.06 inches and the minimum is 3.35 inches. Before purchasing, please measure the size of your pipe to see if it fits this product.The range of working temperature is 122 F~662 F 50 ~350 . Please be sure the tempereture is not over 350 C.Please be free to contact us if you have any problem or concern.
- [Working Principle]:By converting heat into electrical energy,the heat powered stove fan will automatically start working when the surrounding reach certain tempreture, accelerating warm air flowing.No batteries or electricity needed! The improved hot air circulation ensures greater comfort ,while the wood used for the stove can be reduced by about 40%.
- [Longer Working Life]: The whole wood burning stove fan is made from anodized aluminum, which is rust-proof, wear-resisting, with good thermal conductivity ,not be deformed or discoloured and can withstand high temperatures up to 752 F (400 C). The heat-powered stove fan has a higher thermal conductivity efficiency than those steel ones.
- [Larger Air Flow]: This upgraded little stove fan have two motor, diffusing warm air throughout the whole room perfectly.Continuously bring most comfortable and stable warmth.
- [Space-Saving and Silent-Operating]:The stove fan can be fixed on the chimney Pipe of Wood/Log Burner/Fireplace, stable for Incline surface and won't take up more space.And there is almost whisper when operating.Don't worry being disturpted.
- [Package Includes]: 1 * Double Head Fireplace Fan ; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual;
- See more on Amazon...
Brand: TEENGSE
Dimensions: 4.33 x 8.35 x 5.71 inches | Weight: 2.16 pounds
Warranty: 2 year manufacturer.
See On Amazon #8
US Stove Vogelzang HR-6 Heat Reclaimer, Fully Automatic Quiet 130 CFM Blower, Fully Sealed from Flue Gasses, Compatible with all Wood or Coal Stoves, 6 Inch Diameter Flue Pipe
Asin: B000AMAV7U | Model: 086738081863 | PartNumber: 086738081863 | Ean: 0086738081863 | UPC: 086738081863
Brand: Us Stove Company.
Brand: Us Stove.
Manufacturer: Vogelzang.
Brand: Vogelzang | Manufacturer: Vogelzang
Dimensions: 13.00 x 13.00 x 11.00 inches | Weight: 12.00 pounds
See On Amazon #9
CoutureBridal Heat Powered 4 Blades Stove Fan,Silent Flue Pipe Fireplace Fan, Eco-Friendly on Chimney for Wood Log Burner Fireplace
Asin: B08G52JP41 | Model: SG966002 | PartNumber: SG966002 | Ean: 0791564574648 | UPC: 791564574648
【 Energy Saving】: The Thermoelectric Module Acts As A Small Generator To Power The Fan Motor. No Batteries Or Electricity Needed! The Improved Hot Air Circulation And Ensures Greater Comfort ,While Reduces The Wood Consumption Of The Stove..
【Quiet, No Noise】: The Only Moving Part Is The Blade Assembly, Quiet And No Noise Generate. You Will Not Even Know This Fan Is There, But You Will Feel The Warmth. Please Feel Free To Contact Us If You Have Any Question..
【Space Saving 】: The Stove Fan Can Be Fixed On The Chimney Pipe Of Wood/Log Burner/Fireplace , It Is Stable For Incline Surface And Won't Take Up More Space..
【Working Principle】: Heat Powered Wood Stove Fans Generate Power By Converting The Heat From Stove Into Electricity, Electricity Generating Units Convert The Heat Energy Into Kinetic Energy To Drive The Motor, Then The Blades Spin.No Batteries Or Electricity Required, Eco-Friendly..
Features
- New Upgrade : New fan blade ,Faster Speed,Larger Air Volume, Lower starting temperature,Lower noise,Motor has a longer service life, More solid and durable,Highest performing.Never need to turn it on or off, Start working automatically when the starting temperature is reached.Reinforced 4 Blades,Made of premium anodized aluminum, the heat-powered stove fan has a higher thermal conductivity efficiency than those steel ones.
- Working principle : Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly.
- Energy saving : the thermoelectric module acts as a small generator to power the fan motor. No batteries or electricity needed! The improved hot air circulation and ensures greater comfort ,while reduces the wood consumption of the stove.
- Space saving : The stove fan can be Fixed on the chimney Pipe of Wood/Log Burner/Fireplace , it is stable for Incline surface and won't take up more space.
- Quiet, no noise : The only moving part is the blade assembly, quiet and no noise generate. You will not even know this fan is there, but you will feel the warmth. Please feel free to contact us if you have any question.
- See more on Amazon...
Brand: CoutureBridal | Manufacturer: SISI
Dimensions: 4.90 x 4.50 x 4.60 inches | Weight: 1.20 Pounds
See On Amazon #10
PYBBO Heat Powered Wood Chimneys Stove Fan, Pipe Fireplace Fan, 5 Blades Stove Fan, Silent Operation Motors Fan, Winter Cocoon Stove Fan for Wood Burning Stove/Pellet/Log with Magnetic Thermometer
Asin: B0BZS97TTH | Model: 0113-Stove fan | PartNumber: 0113-Stove fan
Silent Operation, Spread Heat Around Room And Increase Temperature With Low Noise. The Moving Part Is The Blades Assembly, So The Working Noise Is Below 32Db. It Will Not Interrupt Your Reading, Work, And Other Activities. More Stable And Environmental Protection.
When The Temperature Reaches 212°F, Woodstove Fans Will Work Best. Cfm: 160-220. If The Fan Doesn't Run In Time After Reaching The Temperature, Please Move The Blade Slightly (Please Do Not Touch It Directly With Your Hands). Please Test The Temperature Of The Fireplace Before Purchase And Pay Attention To Monitoring The Temperature Change During Use.
Overheating Protection, The In-Built Bi-Metallic Strip At The Base Of The Stove Fan Is Designed To Raise The Edge Of The Fan Slightly As The Maximum Operating Temperature Is Approached To Protect The Motor And The Moelectric Module. The Stove Fan Can Withstand 65-350 ℃(149-660℉) And Keep Working.
No Batteries Or Mains Electricity Required, The Thermoelectric Module Acts As A Small Generator To Power The Fan's Motor. The Fan Base And Blade Are Made From Anodized Aluminum Which Is Rust-Proof, Wear-Resisting, With Good Thermal Conductivity.
Features
- The stove fan can be fixed on the chimney Pipe of Wood/Log Burner/Fireplace, this new design heat activated fan is suitable for the uneven surface of fireplace and won't take up more space. Improve hot air circulation for greater comfort , and reduce 30% wood costsNo batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
- No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
- Silent operation, spread heat around room and increase temperature with low noise. The moving part is the blades assembly, so the working noise is below 32DB. It will not interrupt your reading, work, and other activities. More stable and environmental protection
- Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module. The stove fan can withstand 65-350 (149-660 ) and keep working
- When the temperature reaches 212 F, woodstove fans will work best. CFM: 160-220. If the fan doesn't run in time after reaching the temperature, please move the blade slightly (Please do not touch it directly with your hands). Please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use
- See more on Amazon...
Brand: PYBBO
See On Amazon #11
Tomersun New Designed Stove Pipe Fan for Incline Surface Fixed on The Chimney Pipe of Wood/Log Burner/Fireplace
Asin: B073QL23P1 | Ean: 1909072807779
Self Regulating--The Fan Works With A Temperature Between 185F - 660F (85C - 350C),Adjust Its Speed Automatically With The Stovepipe Temperature.
Less Consumption ,More Efficiency--Reduce The Fuel Consumption And Make The Room Warmer Quickly.
Whisper-Quiet--The Only Moving Part Is The Blade Assembly.You Won't Even Know This Fan Is There,But You'll Feel The Warmth!.
No Batteries Or Electricity Required--The Stove Fan Uses Heat From The Stovepipe Surface To Spin.
Features
- Suitable for Incline Surface--Fixed on chimney pipe(Diameter about 7-7.8 inches) with stainless steel pipe clamp
- No Batteries or Electricity required--The stove fan uses heat from the stovepipe surface to spin
- Self Regulating--The fan works with a temperature between 185F - 660F (85C - 350C),adjust its speed automatically with the stovepipe temperature
- Whisper-quiet--The only moving part is the blade assembly.You won't even know this fan is there,but you'll FEEL the WARMTH!
- Less Consumption ,More Efficiency--Reduce the fuel consumption and make the room warmer quickly
- See more on Amazon...
Brand: Tomersun | Manufacturer: TOMERSUN
Dimensions: 7.87 x 7.48 x 5.12 inches | Weight: 2.20 Pounds
See On Amazon #12
Heat Powered Stove Fan, Magnetically Mounted Flue Pipe Fireplace Fan, 4 Blades Wood Stove Fans Non Electric, Silent Ecofan for Gas/Logs/Pellet Stove, Helping Circulate Heat
Asin: B0CP96XZCG | Model: 600E | PartNumber: 600E | Ean: 0739319028916 | UPC: 739319028916
🔥【Super Quiet 】The Only Moving Parts Of Ecofan Wood Stove Fan Are The 4 Blades, Less Than 25 Db, Say Goodbye To Scary Noises, It Is So Quiet That You Won't Notice It In Operation But You Will Feel The Heat!.
🎁【Perfect Gift】Size: 18*15*17.4 Cm. Suitable For Stove Pipe Diameter: 12 ~ 15.5 Cm (Circumference: 37.7 ~ 48.7 Cm). The Pellet Stove Fan Is Suitable For Wood, Gas And Pellet Stove With Surface Temperatures Between 100℃ ~ 345℃. It Is The Best Gift For Christmas, Halloween For Family And Friends..
😃【Warm Tips】① Below 100 ℃, Above 345 ℃, The Stove Fan Does Not Work. If The Highest Temperature Of Your Stove Pipe Is Lower Than 100°C/212°F, It Is Not Suitable ②When The Cocoon Fan Is Running, Please Do Not Touch. ③Please Check Whether The Circumference Of The Pipe Meets The Usage Standards (Diameter: 12 ~ 15.5 Cm/ Circumference: 37.7 ~ 48.7 Cm).
🔥【Energy Saving】Heat Drive, No Electricity, Environmental Protection, Cost Savings. Heat Fan Make Full Use Of The Heat Generated By The Wood Burning Stove To Generate Electricity To Operate, Let The Heat Spread Throughout The Room, Not Just The Ceiling And Areas Near The Stove, Cocoon Fan Can Reduce The Use Of Wood In About 38%..
🔥【Magnetic Installation】2 Powerful High Temperature Resistant Magnets, With Super Strong Adsorption Force, The Fireplace Fan Is Directly Adsorbed On The Pipe By The Magnets, Which Is Very Firm, Will Not Shake.(If Your Pipe Is Not Made Of Iron, There Is An Extra Iron Ring In The Package To Hold It In Place.).
Features
- Efficient Heat Dissipation 2023 wood stove fan, its speed and air volume have been greatly improved. Heat powered stove fan made of high-quality anodized aluminum, has higher thermal conductivity than steel fans, rust-free, strong and powerful. It can easily distribute the heat from the stove throughout the room.
- Magnetic Installation 2 powerful high temperature resistant magnets, with super strong adsorption force, the fireplace fan is directly adsorbed on the pipe by the magnets, which is very firm, will not shake.(If your pipe is not made of iron, there is an extra iron ring in the package to hold it in place.)
- Super Quiet The only moving parts of ecofan wood stove fan are the 4 blades, less than 25 dB, Say goodbye to scary noises, It is so quiet that you won't notice it in operation but you will feel the heat!
- Energy Saving Heat drive, no electricity, environmental protection, cost savings. Heat fan make full use of the heat generated by the wood burning stove to generate electricity to operate, let the heat spread throughout the room, not just the ceiling and areas near the stove, cocoon fan can reduce the use of wood in about 38%.
- Perfect Gift Size: 18*15*17.4 cm. Suitable for stove pipe diameter: 12 ~ 15.5 cm (circumference: 37.7 ~ 48.7 cm). The pellet stove fan is suitable for wood, gas and pellet stove with surface temperatures between 100 ~ 345 . It is the best gift for Christmas, Halloween for family and friends.
- Warm Tips Below 100 , above 345 , the stove fan does not work. If the highest temperature of your stove pipe is lower than 100 C/212 F, it is not suitable When the cocoon fan is running, please do not touch. Please check whether the circumference of the pipe meets the usage standards (diameter: 12 ~ 15.5 cm/ circumference: 37.7 ~ 48.7 cm)
- See more on Amazon...
Brand: dskaoo
Dimensions: 6.85 x 7.09 x 5.91 inches
See On Amazon #13
gohantee Heat Powered Stove Fan 4 Blades, Flue Pipe Hanging Fireplace Fan for Wood Logs Burners Fireplace Eco Friendly Efficiently Wood Stove Pipe Fan with Thermometer
Asin: B08P75NCKZ | Model: YL603 | PartNumber: YL603
[ Quiet,No Noise ] The Only Moving Part Is The Blade Assembly, Quiet And No Noise Generate. You Will Not Even Know This Wood Stove Fan Is There, But You Will Feel The Warmth..
[ Product Feature ] The Wood Stove Fans Non Electric Is Made Of Aluminum Alloy. The Fan Size And Blade Diameter Are 5.31X 6.10X 6.30 Inch (135X155x160mm) Respectively And 17 Inch (180 Mm), The Suitable Temperature For The Stove Fan Is 50-350 °C. Temperatures Above This Range May Damage The Fan And Generator Set..
[ Space Saving ] The Stove Fan Can Be Fixed On The Chimney Pipe Of Wood/Log Burner/Fireplace , It Is Stable For Incline Surface And Won't Take Up More Space..
[ Energy Saving ] No Batteries Or Electricity Needed! The Thermoelectric Module Acts As A Small Generator To Power The Fan Motor. The Improved Hot Air Circulation And Ensures Greater Comfort, While Reduces The Wood Consumption Of The Stove. Eco Friendly And Efficiently..
Features
- [ WORKING PRINCIPLE ] Hot-fed stove fan is designed to circulate the hot air created by a wood / coal stove or pellets that Heat powered wood stove fans generate power by converting the heat from stove into electricity, and electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin. Stove fans non electric and you will enjoy warm air.
- [ ENERGY SAVING ] No batteries or electricity needed! the thermoelectric module acts as a small generator to power the fan motor. The improved hot air circulation and ensures greater comfort, while reduces the wood consumption of the stove. Eco Friendly and Efficiently.
- [ QUIET,NO NOISE ] The only moving part is the blade assembly, quiet and no noise generate. You will not even know this wood stove fan is there, but you will feel the warmth.
- [ SPACE SAVING ] The stove fan can be Fixed on the chimney Pipe of Wood/Log Burner/Fireplace , it is stable for Incline surface and won't take up more space.
- [ PRODUCT FEATURE ] The wood stove fans non electric is made of aluminum alloy. The fan size and blade diameter are 5.31x 6.10x 6.30 inch (135x155x160mm) respectively and 17 inch (180 mm), The suitable temperature for the stove Fan is 50-350 C. Temperatures above this range may damage the fan and generator set.
- See more on Amazon...
Brand: gohantee | Manufacturer: gohantee
Dimensions: 4.92 x 7.28 x 5.31 inches | Weight: 1.97 pounds
See On Amazon #14
gohantee Heat Powered Stove Fan Hanging on Chimney Fireplace Fan 5 Blades Silent Operation for Wood Log Burner Fireplace Eco Friendly and Efficient Heat Distribution with Stove Thermometer
Asin: B095WNCBVQ | Model: stove fan | PartNumber: stove fan | Ean: 9306717147405
[Whisper Quiet] The Fireplace Fan Silent Operation. The Only Moving Part Is The Blade Assembly, The Stove Fan Works At Less Than 25 Db. So That You Can Enjoy The Warm Air In A Quiet And Comfortable Environment..
[Space Saving] Easy To Install, The 5-Blade Stove Fan Can Be Attached Directly To The Chimney Pipe Of The Wood Stove, Log Burner Or Fireplace, Can Save More Space. If You Have Any Further Questions, Please Do Not Hesitate To Contact Us..
[Premium Quality] The Material Is Anodized Aluminum, Wear-Resistant And Anti-Rust. Overheating Protection, The In-Built Bi-Metallic Strip At The Base Of The Stove Fan Is Designed To Raise The Edge Of The Fan Slightly And Reduce The Contact Area Of The Heat Source As The Maximum Operating Temperature Is Approached To Protect The Motor And The Moelectric Module..
[Working Temperature] Never Need To Turn It On Or Off, Start Working Automatically. When The Temperature Reaches 50°C(122°F ), The Fan Starts To Rotate. When The Temperature Is Lower Than 50°C(122°F ), The Fan Slowly Stops Rotating. The Higher The Temperature Of The Furnace, The Faster The Blades Rotate. The Operating Temperature Range Is 122°F - 662°F (50°C - 350°C). Always Use A Fireplace Thermometer To Measure The Temperature Of The Stove And Make Sure It Stays Within This Range..
Features
- [WORKING PRINCIPLE] The new upgraded design, heat powered, does not need batteries and electricity or other energy, through thermal energy to kinetic energy, drive the fireplace fan rotation, burn less fuel, get more heat. Protect the environment and save energy. Quickly and efficiently disperse heat into your room.
- [WORKING TEMPERATURE] Never need to turn it on or off, Start working automatically. When the temperature reaches 50 C(122 F ), the fan starts to rotate. When the temperature is lower than 50 C(122 F ), the fan slowly stops rotating. The higher the temperature of the furnace, the faster the blades rotate. The operating temperature range is 122 F - 662 F (50 C - 350 C). Always use a fireplace thermometer to measure the temperature of the stove and make sure it stays within this range.
- [WHISPER QUIET] The fireplace fan silent operation. The only moving part is the blade assembly, The stove fan works at less than 25 db. So that you can enjoy the warm air in a quiet and comfortable environment.
- [PREMIUM QUALITY] The material is anodized aluminum, wear-resistant and anti-rust. Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly and reduce the contact area of the heat source as the maximum operating temperature is approached to protect the motor and the moelectric module.
- [SPACE SAVING] Easy to install, the 5-blade stove fan can be attached directly to the chimney pipe of the wood stove, log burner or fireplace, can save more space. If you have any further questions, please do not hesitate to contact us.
- See more on Amazon...
Brand: gohantee | Manufacturer: gohantee
Dimensions: 8.06 x 7.87 x 5.91 inches | Weight: 1.55 pounds
See On Amazon #15
KFJZGZZ Chimney Fan, 120W Chimney Smoke Evacuator,Fireplace Fan Blower for Wood Burning Stove Log Burner Fireplace, Chimney Induced Draft Fan
Asin: B0CJ2M8WFS | Model: home | PartNumber: home | Ean: 4796276026689
The Whole Machine Adopts High-Strength Plastic Spraying Process, High-Temperature Treatment, Not Easy To Fade, And Has The Advantages Of Anti-Rust, Wear-Resistant, And Corrosion-Resistant..
The New Household Induced Draft Fan, With Built-In Capacitors, Is Resistant To High And Low Temperature And Can Easily Cope With All Kinds Of Bad Weather..
The Shell And Bracket Are Made Of Thickened, Reinforced, And High-Quality Cold-Rolled Plates, Which Are Firm And Non-Deformable..
The Operating Voltage Of The Product Is 220V( 110V-120V Voltage, We Will Be Equipped With A Voltage Converter), And The Chimney Induced Draft Fan Is Used By Leaving Two Ends Of The Wire For Connection To The Power Source..
Features
- It is very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney.
- The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), and the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
- The whole machine adopts high-strength plastic spraying process, high-temperature treatment, not easy to fade, and has the advantages of anti-rust, wear-resistant, and corrosion-resistant.
- The shell and bracket are made of thickened, reinforced, and high-quality cold-rolled plates, which are firm and non-deformable.
- The new household induced draft fan, with built-in capacitors, is resistant to high and low temperature and can easily cope with all kinds of bad weather.
- See more on Amazon...
Brand: KFJZGZZ | Manufacturer: KFJZGZZ
See On Amazon #16
Tjernlund RT750H Fireplace Chimney Fan ,black
Asin: B003305HV6 | Model: RT750H | PartNumber: RT750H | Ean: 0080956956453 | UPC: 080956956453
Stainless Steel Material Handling Impeller Repels Soot.
Includes Mounting Hardware For Tile-Lined And Metal Chimneys.Voltage:120 Vac.
Built-In Cooling Fan Protects 1/2 Hp Sealed Ball Bearing Motor.
Clamshell Design Swings Clear Of Chimney For Easy Access And Cleaning.
Features
- Works on fireplaces with hearth face openings up to 14 feet
- Clamshell design swings clear of chimney for easy access and cleaning
- Stainless steel material handling impeller repels soot
- Built-in cooling fan protects 1/2 HP sealed ball bearing motor
- Includes mounting hardware for tile-lined and metal chimneys.Voltage:120 VAC
- See more on Amazon...
Brand: Tjernlund | Manufacturer: Tjernlund
Dimensions: 22.50 x 22.50 x 21.00 inches | Weight: 35.00 pounds
See On Amazon #17
Tjernlund CSA1 Chimney Stack Assist Draft Inducer Fan Kit for Orphaned Water Heaters
Asin: B013SD0YCY | Model: CSA1 | PartNumber: CSA1 | Ean: 0080956958303 | UPC: 080956958303
Mechanical Assist Fan Protects Against Condensation Callbacks And Flue Gas Spillage Problems.
The Csa1 Kit Includes A Draft Hood Linear Limit Safety To Lock Out The Water Heater In Case Of Sustained Flue Gas Spillage.
Installing The Csa1 Kit Is A One-Person Job And Doesn’T Require An Electrician.
Prevent Roof Fall Liabilities.
Features
- Eliminates Need for Chimney Liner When Venting Water Heaters in Oversized Chimneys
- Prevent Roof Fall Liabilities
- Mechanical assist fan protects against condensation callbacks and flue gas spillage problems
- Installing the CSA1 Kit is a one-person job and doesn t require an electrician
- The CSA1 Kit includes a draft hood Linear Limit Safety to lock out the water heater in case of sustained flue gas spillage
- See more on Amazon...
Brand: Tjernlund | Manufacturer: Tjernlund Products
See On Amazon #18
fanverk Wood Chimneys Stove Fan Pipe Fireplace Fan - Heat Powered, 6 Blades, Increases Warm Air Circulation by 80% Compared to 4 Blade Fans - Suitable for Wood/Log Burner/Fireplace
Asin: B0C7K8CGZ9 | Model: FGSL0C6YB0 | PartNumber: FGSL0C6YB0 | Ean: 0655746649855 | UPC: 655746649855
🔥【Silent & Energy-Saving】 Our Wood Burning Fan Is Driven By Energy Generated From The Heat Of Your Stovetop, Meaning No Batteries Or Electricity Is Required. The Fan Starts Spinning Automatically As The Stove Temperature Hits A Certain Range, With A Working Noise Of Less Than 25Db Because The Only Moving Part Is The Blades Assembly. You'll Hardly Know It's There, But You Will Feel The Breeze It Creates, Not Wind From The Fireplace Fan..
🔥【2 Years Warranty】 Simply Place It Next To The Chimney, Allowing About 20-50Cm Of Space Behind The Fan, And Let It Push The Warm Air Out Into The Room. The Innovative Design Ensures That You Can Enjoy A Warm And Cozy Winter Season Without Any Hassle.We Ensure The Quality Of Our Thermal Fan For Buddy Heater. You Can Contact Us If You Have Any Questions, And We Will Give You A Satisfactory Solution Within 24 Hours..
🔥【Built-In Overheat Protection】 Our Stove Fan Includes An In-Built Metallic Strip At The Base That Raises The Edge Of The Fan Slightly When The Maximum Operating Temperature Is Approached, Protecting The Teg Unit And The Fan. Then, The Fan Recovers Normally As The Surface Temperature Decreases..
🔥【Efficiently Warms Up Your Room】 Our Newly Designed 5-Blade Stove Fan Helps Provide A Larger Air Volume, Diverting Warm Air Horizontally Instead Of Vertically All Around, Making Your Room Warmer Faster! This Is A Great Way To Make Full Use Of The Heat From Your Stovetop, And Our Fan Can Be Widely Used For Wood Burning Stoves, Pellet Stoves, And More..
Features
- Unmatched Quality Our fireplace stove fan is crafted with high-strength aluminum alloy materials and a precise extruded process. With double anodized surface processing, the fan boasts a fine and neat surface that will not deform or discolor even after prolonged use under high temperatures of up to 350 C. You can trust that our fan is built to last, providing reliable and efficient performance for years to come.
- Efficiently Warms Up Your Room Our newly designed 5-blade stove fan helps provide a larger air volume, diverting warm air horizontally instead of vertically all around, making your room warmer faster! This is a great way to make full use of the heat from your stovetop, and our fan can be widely used for wood burning stoves, pellet stoves, and more.
- Silent & Energy-Saving Our wood burning fan is driven by energy generated from the heat of your stovetop, meaning no batteries or electricity is required. The fan starts spinning automatically as the stove temperature hits a certain range, with a working noise of less than 25db because the only moving part is the blades assembly. You'll hardly know it's there, but you will feel the breeze it creates, not wind from the fireplace fan.
- Built-In Overheat Protection Our stove fan includes an in-built metallic strip at the base that raises the edge of the fan slightly when the maximum operating temperature is approached, protecting the TEG unit and the fan. Then, the fan recovers normally as the surface temperature decreases.
- 2 Years Warranty Simply place it next to the chimney, allowing about 20-50cm of space behind the fan, and let it push the warm air out into the room. The innovative design ensures that you can enjoy a warm and cozy winter season without any hassle.We ensure the quality of our thermal fan for buddy heater. You can contact us if you have any questions, and we will give you a satisfactory solution within 24 hours.
- See more on Amazon...
Brand: fanverk
Dimensions: 5.30 x 5.90 x 6.50 inches | Weight: 0.92 pounds
See On Amazon #19
Gemi Elettronica Chimney Fan Fireplace Fan Extractor Aspirator Chimney Draft Inductor Basic Model for Barbecue BBQ 110 V
Asin: B0100K035G | Ean: 8053017260150
Adjustable Bracket Kit For Any Square Or Rectangular Flue From 20X20 Cm A 43X43 Cm.
Solving The Smoke Problem 100% Guaranteed.
Protection Grid Robust Anti-Volatile (According To The Standard)Uni Iso 13857 Made Of Electrowelded Steel Rings.
6-Speed Regulator.
Features
- RESISTS TO 300 C - SUCTION OF 2500 M /h
- 6-SPEED REGULATOR
- Adjustable bracket kit for any square or rectangular flue from 20x20 cm a 43x43 cm
- Protection grid robust anti-volatile (according to the standard)UNI ISO 13857 made of electrowelded steel rings
- Solving the smoke problem 100% guaranteed
- See more on Amazon...
Brand: Gemi Elettronica
See On Amazon #20
Chimney Fan Fireplace Exhaust Fan Flue Fan Chimney Draft Inducer Chimney Exhaust Fan For Fireplace Professional Model 30 cm round model 110 V Barbecue BBQ Gemi Elettronica
Asin: B07R5C9FCM | Model: Şömine Çatı Fanı Profesyonel | PartNumber: Şömine Çatı Fanı Profesyonel | Ean: 8053017261096, 8053017261072
Up To 3800 M³ / H (With 6-Speed Regulator).
Universal (For Any Type Of Chimney).
Super Recommended In Case Of Exposure To Salt And High Temperatures.
6 Years Warranty.
Features
- Withstands up to 700 C (even in the event of a chimney fire)
- 6 Years Warranty
- Up to 3800 m / h (with 6-speed regulator)
- Super Recommended in case of exposure to salt and high temperatures
- Universal (for any type of chimney)
- See more on Amazon...
Brand: Gemi Elettronica | Manufacturer: Gemi Elettronica
Weight: 52.73 Pounds
See On Amazon
Looking For Something Else?
Search