Stainless Steel Grindometer, Particle Fineness Gauge, Single Slot, Double/Single Slot Scraper Fineness Meter, Paint Fineness Board (Universal, Scraper)
Asin: B0CP96F57P | Ean: 9313597457135
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material: High Grade Wear And Corrosion Resistant Stainless Steel.
Application: Used In Paint, Plastic, Pigment, Printing Ink, Paper, Ceramics And Other Fields.
Features
- Measure the size and dispersion of pigment and impurity particles in liquid and slurry to control the quality of the product in production, storage and application
- Application: Used in paint, plastic, pigment, printing ink, paper, ceramics and other fields
- Material: High grade wear and corrosion resistant stainless steel
- See more on Amazon...
Brand: LEINZZO | Manufacturer: LEINZZO
See On Amazon Similar To Stainless Steel Grindometer Particle Fineness
#1
Stainless Steel Test Kit for Differentiating 316/304
Asin: B0BRJLWV9Q | Model: 1 | PartNumber: 1 | Ean: 0738058178760 | UPC: 738058178760
Rapid: Results In 2 Minutes..
Please Wear Gloves To Operate The Test..
Notice: Keep Out Of Reach Of Children..
Ready-To-Use: All Essential Components & Manual Included For Testing Cutlery, Castings, Pipes, Wire Etc..
Features
- Packaging upgraded 2024 Convenient: Differentiate stainless steel 316 vs. 304 or 201 series through color change. Can test more than 100 times per pack.
- Ready-to-use: all essential components & manual included for testing cutlery, castings, pipes, wire etc.
- Rapid: results in 2 minutes.
- Notice: keep out of reach of children.
- Please wear gloves to operate the test.
- See more on Amazon...
Brand: MARSTEP | Manufacturer: MARSTEP TECHNOLOGIES
See On Amazon #2
GLTL Fineness Gauge Grindometer Fineness of Grind ISO Standard one Channels 0-25/50/100/150um (0-50um)
Asin: B0789VHLPN | Ean: 0678279237078 | UPC: 678279237078
[Reading Unit: Μm] Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um ;4 Hegman=50 Um ;8 Hegman=0 Um..
[Not Only For Paint] Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On. In Chocolate, Ceramics, Paper, Medicine, Food And Other Industries, It Is Also Possible To Use Single Groove Grinding Fineness Design For Fineness Detection..
[How To Choose Grindometer] Choose A Fineness Gauge 5-10Um Higher Than The Product Fineness Range You Measured..
[Using And Reading] Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Visible Grains In The Channel, This Numerical Value Is The Fineness..
Features
- [0-50 m, INDEX VALUE 2.5 m] We have four kinds of single groove grindometer: 0-25 m, 0-50 m ( index value is 2.5 m) 0-100 m, 0-150 m ( index value is 5 m). Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove. Scale in microns ( m), the accuracy of fineness plate grooves 1 m.Made by CNC precision machining.
- [USING AND READING] Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of visible grains in the channel, this numerical value is the fineness.
- [READING UNIT: m] Correspondence between micron and hegman as follows: 0 hegman=100 um ;4 hegman=50 um ;8 hegman=0 um.
- [HOW TO CHOOSE GRINDOMETER] Choose a fineness gauge 5-10um higher than the product fineness range you measured.
- [NOT ONLY FOR PAINT] Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #3
BAOSHISHAN 0-25um Grindometer Stainless Steel Fineness Gauge ISO Standard Single Groove with 2 Scrapers, Storage Case, 25 m/50 m/100 m/150 m Available (25 m)
Asin: B07Y46PVLQ | Model: FBA-25 | PartNumber: FBA-25
[Reading Unit: Μm]--Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
[Not Only For Paint]--Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On. In Chocolate, Ceramics, Paper, Medicine, Food And Other Industries, It Is Also Possible To Use Single Groove Grinding Fineness Design For Fineness Detection..
[How To Choose Grindometer]--Choose A Fineness Gauge 5-10Um Higher Than The Product Fineness Range You Measured. Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
[Using And Reading]--Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Features
- [0-25 m, INDEX VALUE 2.5 m]--We have four kinds of single groove grindometer: 0-25 m, 0-50 m ( index value is 2.5 m) 0-100 m, 0-150 m ( index value is 5 m). Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove. Scale in microns ( m), the accuracy of fineness plate grooves 1 m.
- [USING AND READING]--Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- [READING UNIT: m]--Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- [HOW TO CHOOSE GRINDOMETER]--Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- [NOT ONLY FOR PAINT]--Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.
- See more on Amazon...
Brand: BAOSHISHAN | Manufacturer: BAOSHISHAN
See On Amazon #4
MXBAOHENG Grindometer Single-Channel Grind Fineness Gauge Gage Stainless Steel Hegman Gauge 0-100 m 0-8 Hegman
Asin: B06XNNMX5Y | Model: FBF702 | PartNumber: FBF702 | Ean: 5990015668164
Graduation: 0.5Hegman,5Μm.
Number Of Grooves: 1.
Overall Dimensions: 170×50×12Mm.
Range: 0-8 Hegman; 0-100Μm.
Features
- Groove size:140 12.5mm
- Range: 0-8 Hegman; 0-100 m
- Graduation: 0.5Hegman,5 m
- Overall dimensions: 170 50 12mm
- Number of grooves: 1
- See more on Amazon...
Brand: MXBAOHENG | Manufacturer: MXBAOHENG
See On Amazon #5
LANTAO Fineness of Grind Gauges Grindometer 0-8 Hegman; 0-100um Single-Channel Grind fineness Gauge gage
Asin: B07K1ZS7HN | Ean: 7294854474473
Brand: LANTAO | Manufacturer: LANTAO
See On Amazon #6
Division Value Stainless Steel Single Groove Fineness Gauge Grindometers (0~100 m,5 m)
Asin: B01N4WXPFX | Ean: 8165077869607
Material: 40Cr13 Stainless Steel Product Hardness:Hrc50±2.
Execution Standard:Gb/T 1724,6753.1,132175.5 Iso 1524 Astm D333 D1210.
Scraper Size:170×50×15Mm Scraper Size:70×40×6.5Mm Inclined Groove Size:140×12Mm.
Scale Range:0-100Μm Graduated Value:5Μm.
Features
- Single Groove Fineness Grind Gauge
- Scale Range 0-100 m Graduated Value 5 m
- Material: 40Cr13 stainless steel Product Hardness HRC50 2
- Scraper Size 170 50 15mm Scraper Size 70 40 6.5mm Inclined Groove Size 140 12mm
- Execution Standard GB/T 1724,6753.1,132175.5 ISO 1524 ASTM D333 D1210
- See more on Amazon...
Brand: YUCHENGTECH | Manufacturer: YUCHENGTECH
See On Amazon #7
Wide Groove Grindometer Precision Fineness of Grind Gauges Meter Hegman(Size:PS2431)
Asin: B0D5LTVVN5 | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115182279
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #8
0-50um Single Groove Trowel Fineness Meter Stainless Steel Hegman Grind Gauge(Size:PUSHEN 0-25un)
Asin: B0D5LTNW7P | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115182118
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #9
0-50um Stainless Steel Double Groove Trowel Fineness Meter/Grindometers
Asin: B0D5LSVSH6 | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181999
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 2.20 pounds
See On Amazon #10
Grindometer Fineness of Grind Gauges Meter Tester Grind Gages Micron Hegman Various Specification(Size:1903-25)
Asin: B0D5LSMPH4 | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115182248
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #11
BGD241/1 (0-25um) Single Groove Stainless Steel Fineness Meter/Hegman Grind Gauge
Asin: B0D5LSFW5J | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181944
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 2.20 pounds
See On Amazon #12
Trowel Fineness Gauge Stainless Steel Paint Particle Fineness Meter Fine Plate Single Sink(Size:Single Sink 0-100um)
Asin: B0D5LSBTZF | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181784
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 4.41 pounds
See On Amazon #13
0-100 0-25 0-15 0-50 um Double Groove Precision Coatings Fineness Meter PS2440 PS2441 PS2442 PS2443(Size:PS2441 0-25 um)
Asin: B0D5LR135B | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181975
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #14
Small Grindometer Precision Fineness of Grind Gauges Meter Tester 0~15um Paint Inks(Size:PS2402)
Asin: B0D5LQFP8M | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115182354
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 2.20 pounds
See On Amazon #15
Stainless Steel Fineness Meter 0 to 25/50/100/150um Single Groove Fineness Board Coating Particle Fineness Meter(Size:0-150um)
Asin: B0D5LPFSCD | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181869
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #16
0-50um Single Groove Stainless Steel Grindometer Fineness Gauges Meter BGD241/2
Asin: B0D5LPBTC4 | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181920
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #17
0-50um Trowel Fineness Meter Stainless Steel Single Groove Fineness of Grind Gauge Hegman
Asin: B0D5LNVG97 | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115182125
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #18
Measure Range 0-15um Single Groove Stainless Steel Fineness Meter BGD241/0 for Coating
Asin: B0D5LNJQHL | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181906
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 3.31 pounds
See On Amazon #19
0-100um Single Groove Fineness of Grind Gauge Scraper Fineness Test Particle Fineness Meter BGD241/3
Asin: B0D5LMP1TK | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181913
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 4.41 pounds
See On Amazon #20
0-100um Stainless Steel Fineness Meter Double Groove Grindometer BGD242/3
Asin: B0D5LMG8QJ | Model: Aoleaby | PartNumber: Aoleaby | Ean: 8082115181937
Single Groove Means Only Only One Scraper Groove, Double Grooves Refer To Two Scraping Grooves, Which Are Convenient For Comparison..
Put Some Particles On The Deeper Groove, Then Use Scraper To Scrape Them From Deeper To Low Groove. Immediately (Not Over 5 Seconds) Observe The Tick Mark Of Grain Visible In The Channel, This Numerical Value Is The Fineness..
Fineness Gauge Can Measure Not Only The Fineness Of Paint, But Also The Fineness Of Coatings, Pigments, Raw Materials, Plastics, Printing Ink And So On..
Correspondence Between Micron And Hegman As Follows: 0 Hegman=100 Um 4 Hegman=50 Um 8 Hegman=0 Um.
Features
- Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove.
- Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
- Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
- Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on.
- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
- See more on Amazon...
Brand: Aoleaby | Manufacturer: Aoleaby
Weight: 4.41 pounds
See On Amazon
Looking For Something Else?
Search