(32 Pcs) Propellers Blades for DJI Mini 4K, Mini 2, Mini 2 SE & Mini SE, Replacement Low-Noise and Quick-Release Props Wings Compatible with DJI Mini 4K, Mini 2, Mini 2 SE & Mini SE, Drone Accessories
Asin: B0CPFMYYMY | Ean: 0730756852584 | UPC: 730756852584
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✅𝗟𝗜𝗚𝗛𝗧 𝗪𝗘𝗜𝗚𝗛𝗧 & 𝗘𝗔𝗦𝗬 𝗜𝗡𝗦𝗧𝗔𝗟𝗟: The Blades Are Small In Size Design To Provide Strong Power For The Mini 4K, Mini 2 Se And Ensure The Drone's Long-Term Endurance. Equipped With Mini Screw Driver And Screw, It Can Help You Easily Remove And Install The Propellers.（Please Use Our Screws When Installing The Blad).
🧡𝗦𝗘𝗥𝗩𝗜𝗖𝗘: If You Are Not Completely Satisfied With The Propellers Within 30 Days Of Purchase, We Will Happily Refund You For Any Reason. If You Have Any Questions, Please Contact Us And We Will Provide Satisfactory Service..
✅𝗪𝗛𝗔𝗧 𝗬𝗢𝗨 𝗚𝗘𝗧：32 Pcs Propellers , 48 Pcs Screws, 3 Pcs Upgraded Screwdriver..
✅𝗟𝗢𝗪 𝗡𝗢𝗜𝗦𝗘 𝗗𝗘𝗦𝗜𝗚𝗡: Propellers Specially Made For Dji Mini 4K/ Mini 2/Se/2 Se Produce Less Noise Because The Tip Of The Original Propeller Is Made Of Flexible Rubber, The Propeller May Have Obvious Noise. However, The Tip Of Our Propeller Is Painted Orange, And Its Flying Effect Is Much More Quiet. And Have Undergone Precise Dynamic Balancing Tests, The Flying Effects Are Nearly The Same As Those Of The Original Ones, And You Can Save More Costs..
Features
- :That this propellers are only compatible with DJI Mini 4K/ Mini 2/ Mini SE and Mini 2 SE Drone. please note that they are not OEM Blades
- : Propellers specially made for DJI Mini 4K/ Mini 2/SE/2 SE produce less noise Because the tip of the original propeller is made of flexible rubber, the propeller may have obvious noise. However, the tip of our propeller is painted orange, and its flying effect is much more quiet. and have undergone precise dynamic balancing tests, The flying effects are nearly the same as those of the original ones, and you can save more costs.
- & : The blades are small in size design to provide strong power for the mini 4k, mini 2 se and ensure the drone's long-term endurance. Equipped with mini screw driver and screw, it can help you easily remove and install the propellers. please use our screws when installing the blad)
- 32 Pcs propellers , 48 Pcs screws, 3 Pcs upgraded screwdriver.
- : If you are not completely satisfied with the propellers within 30 days of purchase, we will happily refund you for any reason. If you have any questions, please contact us and we will provide satisfactory service.
- See more on Amazon...
Brand: Betschkim | Manufacturer: Betschkim
Dimensions: 0.60 x 3.50 x 3.50 Inches
See On Amazon Similar To 32 Pcs Propellers Blades for
#1
32Pcs Propellers for DJI Mini 3 Replacement Prop Blades Low Noise Accessories for DJI Mini 3 Drone Accessories Exclusive Screws & Screwdrivers Orange Tips
Asin: B0BR7ZBR1R | Model: YFMN03O | PartNumber: YFMN03O | Ean: 0768443163545 | UPC: 768443163545
Features: Easy To Install And Remove, Easy To Carry. New Aerodynamic Design, Excellent Noise Reduction Performance, Reduce Wind Resistance, And Make Your Drone Have A Longer Endurance Time..
Package List: 32 Propellers (Orange Tips)+4 Screwdrivers+48 Screws(Preventing Missing Screws). The Drone Is Just To Better Display The Product, It Is Not Included In The Package..
Intall Tools: The Package Come With Mini Screwdrivers And Screws To Help You To Remove And Install The Propellers..
Applicable Models: This Propellers Are Suitable For Dji Mini 3. If You Need The Mini 3 Propellers, That Is B0b3mqcgq1（You Can Search The Asin On Amazon Or Choose It In Our Store）..
Features
- Upgraded Version: This propellers set has lighter weight and low noise design, it will make your drone flying more stable and quieter.
- Applicable Models: This propellers are suitable for DJI Mini 3. If you need the Mini 3 propellers, that is B0B3MQCGQ1 You can search the asin on Amazon or choose it in our store .
- Features: Easy to install and remove, easy to carry. New aerodynamic design, excellent noise reduction performance, reduce wind resistance, and make your drone have a longer endurance time.
- Intall Tools: The package come with mini screwdrivers and screws to help you to remove and install the propellers.
- Package List: 32 propellers (orange tips)+4 screwdrivers+48 screws(Preventing missing screws). The drone is just to better display the product, it is not included in the package.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.63 x 6.30 x 3.15 Inches
Warranty: No
See On Amazon #2
(32 Pcs)- Mini 4 Pro/Mini 3 Pro Propellers Blades for DJI Mini 4 Pro/Mini 3 Pro, Replacement Low-Noise and Quick-Release Props Wings Compatible with DJI Mini 4 Pro/Mini 3 Pro Drone Accessories
Asin: B0CLVQJ4MP | Ean: 0730756852492 | UPC: 730756852492
✅𝗘𝗔𝗦𝗬 𝗥𝗘𝗠𝗢𝗩𝗘 & 𝗜𝗡𝗦𝗧𝗔𝗟𝗟: Equipped With Upgraded Screwdriver Screw Driver And Screw, It Can Help You Easily Remove And Install The Propellers. （Please Use Our Screws When Installing The Blad).
🧡𝗦𝗘𝗥𝗩𝗜𝗖𝗘: If You Are Not Completely Satisfied With The Propellers Within 30 Days Of Purchase, We Will Happily Refund You For Any Reason. If You Have Any Questions, Please Contact Us And We Will Provide Satisfactory Service..
✅𝗪𝗛𝗔𝗧 𝗬𝗢𝗨 𝗚𝗘𝗧: 32 Pcs Propellers , 48 Pcs Screws, 3 Pcs Upgraded Screwdriver..
✅𝗟𝗢𝗪 𝗡𝗢𝗜𝗦𝗘 𝗗𝗘𝗦𝗜𝗚𝗡: Propellers Specially Made For Dji Mini 3 Produce Less Noise Because The Tip Of The Original Propeller Is Made Of Flexible Rubber, The Propeller May Have Obvious Noise. However, The Tip Of Our Propeller Is Painted Orange, And Its Flying Effect Is Much More Quiet. And Have Undergone Precise Dynamic Balancing Tests, The Flying Effects Are Nearly The Same As Those Of The Original Ones, And You Can Save More Costs..
Features
- : Please note that this propellers are only compatible with DJI Mini 3 Drone. and note that they are not OEM Blades [Not applicable to DJI Mini 3 Pro]
- : Propellers specially made for DJI Mini 3 produce less noise Because the tip of the original propeller is made of flexible rubber, the propeller may have obvious noise. However, the tip of our propeller is painted orange, and its flying effect is much more quiet. and have undergone precise dynamic balancing tests, The flying effects are nearly the same as those of the original ones, and you can save more costs.
- & : Equipped with upgraded screwdriver screw driver and screw, it can help you easily remove and install the propellers. please use our screws when installing the blad)
- : 32 Pcs propellers , 48 Pcs screws, 3 Pcs upgraded screwdriver.
- : If you are not completely satisfied with the propellers within 30 days of purchase, we will happily refund you for any reason. If you have any questions, please contact us and we will provide satisfactory service.
- See more on Amazon...
Brand: Betschkim | Manufacturer: Betschkim
Dimensions: 0.59 x 3.90 x 3.10 inches
See On Amazon #3
32 Pcs Propellers for DJI Mavic Mini Propellers, Replacement Low-Noise and Quick-Release Blades Props Wings Compatible with DJI Mavic Mini Drone Accessories
Asin: B0CXJDBRZK | Ean: 0730756852683 | UPC: 730756852683
✅𝗟𝗜𝗚𝗛𝗧 𝗪𝗘𝗜𝗚𝗛𝗧 & 𝗘𝗔𝗦𝗬 𝗜𝗡𝗦𝗧𝗔𝗟𝗟: The Blades Are Small In Size Design To Provide Strong Power For The Mavic Mini And Ensure The Drone's Long-Term Endurance. Equipped With Mini Screw Driver And Screw, It Can Help You Easily Remove And Install The Propellers.（Please Use Our Screws When Installing The Blad).
🧡𝗦𝗘𝗥𝗩𝗜𝗖𝗘: If You Are Not Completely Satisfied With The Propellers Within 30 Days Of Purchase, We Will Happily Refund You For Any Reason. If You Have Any Questions, Please Contact Us And We Will Provide Satisfactory Service..
✅𝗪𝗛𝗔𝗧 𝗬𝗢𝗨 𝗚𝗘𝗧：32 Pcs Propellers , 48 Pcs Screws, 3 Pcs Upgraded Screwdriver..
✅𝗟𝗢𝗪 𝗡𝗢𝗜𝗦𝗘 𝗗𝗘𝗦𝗜𝗚𝗡: Propellers Specially Made For Dji Mavic Mini Produce Less Noise Because The Tip Of The Original Propeller Is Made Of Flexible Rubber, The Propeller May Have Obvious Noise. However, The Tip Of Our Propeller Is Painted Orange, And Its Flying Effect Is Much More Quiet. And Have Undergone Precise Dynamic Balancing Tests, The Flying Effects Are Nearly The Same As Those Of The Original Ones, And You Can Save More Costs..
Features
- :That this propellers are only compatible with DJI Mavic Mini Drone. please note that they are not OEM Blades
- : Propellers specially made for DJI Mavic Mini produce less noise Because the tip of the original propeller is made of flexible rubber, the propeller may have obvious noise. However, the tip of our propeller is painted orange, and its flying effect is much more quiet. and have undergone precise dynamic balancing tests, The flying effects are nearly the same as those of the original ones, and you can save more costs.
- & : The blades are small in size design to provide strong power for the mavic mini and ensure the drone's long-term endurance. Equipped with mini screw driver and screw, it can help you easily remove and install the propellers. please use our screws when installing the blad)
- 32 Pcs propellers , 48 Pcs screws, 3 Pcs upgraded screwdriver.
- : If you are not completely satisfied with the propellers within 30 days of purchase, we will happily refund you for any reason. If you have any questions, please contact us and we will provide satisfactory service.
- See more on Amazon...
Brand: Betschkim | Manufacturer: Betschkim
Dimensions: 0.60 x 4.69 x 3.50 Inches
See On Amazon #4
16pcs 3-Blade Props high-Speed Propellers Popo, 4inch 100mm CW CCW for Racing Frame FPV Drone 1406 2205 1806 Brushless Motors,GEMFAN 4032 Blue,Red,Black,Yellow
Asin: B08VG56KSZ | Model: 661918763526 | PartNumber: 661918763526 | Ean: 0661918763526 | UPC: 661918763526
Strong Motivation: Gemfan 100Mm Prop, Provide Strong Power And Maneuverability..
The Quality Is Guaranteed: From Original Packaging Of Gemfan..
What You Get: 16Pcs In All(4Pcs Blue, 4Pcs Red, 4Pcs Black, 4Pcs Yellow).
Weight&Size: 3.5G/Pc, Diameter Of Mounting Hole Is 5Mm, Suit For 1406 1806 2205 Brushless Motor..
Features
- Compatible Drones: 4 inch props suit for Freestyle FPV racing drone frame.
- Weight&Size: 3.5g/pc, diameter of mounting hole is 5mm, suit for 1406 1806 2205 brushless motor.
- Strong Motivation: Gemfan 100mm Prop, Provide strong power and maneuverability.
- What you get: 16PCS in all(4pcs Blue, 4pcs Red, 4pcs Black, 4pcs yellow)
- The Quality is Guaranteed: From original packaging of GEMFAN.
- See more on Amazon...
Brand: INTGAMX | Manufacturer: INTGAMX
Dimensions: 1.00 x 6.20 x 8.00 inches | Weight: 0.17 Pounds
See On Amazon #5
GAONENG 2PCS GNB LiPo Battery 3S 380mAh 11.4V HV LiHV 90c 180c Horizon eflite Cabled PH2.0 for Beta75X Alpha A75 Inductrix FPV BNF Blade RC
Asin: B09CD6H1CR | Model: GNB3803S90AHV | PartNumber: GNB3803S90AHV | Ean: 0760953776536 | UPC: 760953776536
【Application】- Gaoneng Gnb 3S 380Mah Hv Lipo Battery 60C 120C 11.4V With Xt30 Connector Is A Great Choice For Size 90-130Mm Brushless Drones, 1.6 To 2 Inch Propeller Drone, Beta75x, Alpha A75, Hgl Petrel 120X, Cinebee, 2.5 Inch Toothpick Drone, Cine Whoop, Cinelog, Cinewhoop, Rc Toy, Small Heli, Airplane, Quads, Quadcopter, Helicopter, Multiroter, Mini Micro Fpv, Freestyle Drone, Rc Car, Rc Boat, Aerial Model, Diy Fpv Etc..
【What You Get】- 2 Pieces Gnb 3S 380Mah 11.4V Hv Lipo Battery. If You Have Any Doubt, Please Don’T Be Hesitate To Contact Us, We Will Reply You Within 24 Hours..
【Voltage Note】- Be Sure Charging And Use In Safety. Do Not Leave When Charging. In Order To Keep Battery For Long Cycle Life, Do Not Overcharge More Than 13.05V And Do Not Over Discharge Below 10.2V..
【Dimensions】- 55Mm X 17Mm X 20Mm Appr.(L*W*H); Approx Weight: 32G(+/-1G).
Features
- Specification - Material: Lithium Polymer; Capacity: 380mAh; Voltage: 11.4V Configuration 3S1P; Max cont. Discharge: 90C, Max Burst(C-rate/current):180C.
- Dimensions - 55mm x 17mm x 20mm Appr.(L*W*H); Approx weight: 32g(+/-1g)
- Application - GAONENG GNB 3S 380mAh HV LiPo Battery 60C 120C 11.4V with XT30 Connector is a great choice for size 90-130mm Brushless Drones, 1.6 to 2 inch Propeller Drone, Beta75X, Alpha A75, HGL Petrel 120x, CineBee, 2.5 inch Toothpick Drone, Cine Whoop, Cinelog, Cinewhoop, RC Toy, Small Heli, Airplane, Quads, Quadcopter, Helicopter, Multiroter, Mini Micro FPV, Freestyle Drone, RC Car, RC Boat, Aerial Model, DIY FPV etc.
- Voltage Note - Be sure charging and use in safety. Do not leave when charging. In order to keep battery for long cycle life, do not overcharge more than 13.05V and do not over discharge below 10.2V.
- What You Get - 2 pieces GNB 3S 380mAh 11.4V HV LiPo battery. If you have any doubt, please don t be hesitate to contact us, we will reply you within 24 hours.
- See more on Amazon...
Brand: GAONENG | Manufacturer: GAONENG
Dimensions: 0.79 x 2.17 x 0.67 inches | Weight: 0.14 pounds
See On Amazon #6
Master Airscrew Ludicrous Propellers for DJI FPV - Orange, 4 pcs
Asin: B09TRPZP9S | Model: MA.FPV54324 | PartNumber: MA.FPV54324 | Ean: 0607370091920 | UPC: 607370091920
Improved Efficiency - Up To 2% Longer Flight Time Compared To Dji Oem Propellers Due To The Improved Blade Efficiency. Lower Power Consumption For Long Lasting Hardware. *Performance May Vary Depending On Flight Conditions..
Improved Sound Pitch & Safety - Vibrant Color Options For Better Visibility And Improved Safety. Easier Navigation With Enhanced Situational Awareness..
Responsiveness & Agility - Improved Responsiveness And Agility Help To Better Navigate Through Tough Terrains And Complicated Stunts..
Max Ascent Speed - 13% Increased Ascent Speed - Perfect For Extreme Stunts And Performance Flights. *Nominal Values Compared To Oem Propellers Measured In M Mode With No Gps Limitations..
Features
- FASTER MAX FLIGHT SPEED - Up to 11% Increase in horizontal flight speed. Taking performance to the next level. *Nominal values compared to OEM propellers.
- MAX ASCENT SPEED - 13% Increased ascent speed - perfect for extreme stunts and performance flights. *Nominal values compared to OEM propellers measured in M mode with no GPS limitations.
- IMPROVED EFFICIENCY - Up to 2% longer flight time compared to DJI OEM propellers due to the improved blade efficiency. Lower Power consumption for long lasting hardware. *Performance may vary depending on flight conditions.
- RESPONSIVENESS & AGILITY - Improved Responsiveness and Agility help to better navigate through tough terrains and complicated stunts.
- IMPROVED SOUND PITCH & SAFETY - Vibrant color options for better visibility and improved safety. Easier navigation with enhanced situational awareness.
- See more on Amazon...
Brand: Master Airscrew | Manufacturer: Master Airscrew
Dimensions: 1.18 x 4.72 x 4.72 inches | Weight: 0.07 pounds
See On Amazon #7
Limskey 7 Sets Propellers for Tello 28pcs Propeller for DJI Tello RC Quadcopter Spare Parts Drone Blades 7 Colors
Asin: B0CB9SG94Y | Ean: 0658359494522 | UPC: 658359494522
Material: Pc Plastic, Weight: 0.9G / Pair，Black; Red; White; Grey; Green; Blue; Yellow.
Strong Structure Ensures That This Frame Is Perfect For Your Quadcopter..
Feature: Well Made, Well Balanced Propellers For Tello And Tello Edu Drone.
Usage Method: Direct Insertion For Dji Tello Rc Quadcopter Spare Parts Drone Blade.
Features
- Package include: 7 color, 7set, 28pcs Propeller 2 pcs are clockwise propellers and 2 pcs are counterclockwise propellers.
- Usage method: Direct insertion for DJI Tello RC Quadcopter Spare Parts Drone Blade
- Material: PC plastic, weight: 0.9g / Pair Black; Red; White; Grey; Green; Blue; Yellow
- Feature: Well made, well balanced propellers for Tello and Tello EDU drone
- Strong structure ensures that this frame is perfect for your quadcopter.
- See more on Amazon...
Brand: Limskey | Manufacturer: GUANGZHOU LIMSKEY co.LTD
Dimensions: 0.30 x 4.00 x 4.00 inches
See On Amazon #8
skrnrhrery Propeller Blades,1.8(in) Positive and Negative propellers are Suitable for Quadcopter Aircraft Model Airplane Glider Center Hole 0.04(in) UAV Spare Parts Mini Drone propellers
Asin: B09J2H165H | Model: 02 | PartNumber: 02 | Ean: 3201511064469
Drone Propeller The Propeller Is Well-Made And Well-Balanced. Each Pack Of 10 Pieces Of A And 10 Pieces Of B Leaves, A Total Of 20 Pieces.
Rc Glider Propeller The Propeller Blades Are 46Mm 1.8" Long With A 1.0Mm 0.04" Center Hole. It Should Be Noted That If A And B Are Installed In Reverse, It Will Not Work..
Drone Propeller Blades Made Of Durable And Lightweight Nylon Plastic, Durable.
Mini Quadcopter Propellers Propellers Have Positive And Negative Points, One Blade With A, The Other With B.
Features
- rc aircraft blades 46mmAB Propeller blade suitable for 720 and 8520 model Hollow cupMotor
- mini quadcopter propellers Propellers have positive and negative points, one blade with A, the other with B
- drone propeller The propeller is well-made and well-balanced. Each pack of 10 pieces of A and 10 pieces of B leaves, a total of 20 pieces
- drone propeller blades Made of durable and lightweight nylon plastic, durable
- rc glider propeller The propeller blades are 46mm 1.8 long with a 1.0mm 0.04 center hole. It should be noted that if A and B are installed in reverse, it will not work.
- See more on Amazon...
Brand: skrnrhrery | Manufacturer: skrnrhrery
See On Amazon #9
skrnrhrery Mini Propeller, Suitable for Small and Medium UAV quadcopters Nylon Propeller Center Shaft has 0.8 and 1.0mm, Blade Length is 46/42/37mm AB Positive and Negative Propeller (46 mmaxis1.0mm)
Asin: B0B38FX3Y8 | Ean: 0708500932790 | UPC: 708500932790
Mini Drone Propellers 0.8 Mm Mini Paddles, Made Of Durable And Lightweight Nylon Plastic, Are Well-Made And Well-Balanced, The Other Arabic Numerals On The A And B Paddles Have No Representative Meaning, And The Word Ab On The Paddles Shall Prevail.
Rc Glider Propeller The Package Has 46Mm With Center Hole 0.8Mm/46Mm With Center Hole 1.0Mm, 42Mm And 37Mm Are Both With Center Hole 0.8Mm, Please Carefully Check The Size Of Your Product Requirements..
Aeronautics Drone Blades 4 Types Of Propellers To Choose From, It Needs To Be Accurate To The Size Of The Center Hole Of Your Product And The Length Of The Propeller Blades To Be Used Correctly, Please Carefully Match The Specifications You Need.
Drone Propeller 0.8 Mm Ab Propellers Have Positive And Negative Distinctions. Identical Installations Correspond To Intersecting Lines. If The A Side Is Installed On The B Side, It Will Not Fly. It Needs To Be Readjusted. The Size Needs To Be Consistent With Your Own Product Before You Can Use It..
Features
- 4 types of AB-type mini propellers for your choice, one side A, the other side B, suitable for small and medium miniature remote control flying class, the center hole has 0.8mm 0.03 inches and 1.0mm 0.04 inches, the blade length is 46mm/1.8" 42 mm 1.7 inches and 37 mm 1.5 inches skrnrhrery propeller
- drone propeller 0.8 mm AB propellers have positive and negative distinctions. Identical installations correspond to intersecting lines. If the A side is installed on the B side, it will not fly. It needs to be readjusted. The size needs to be consistent with your own product before you can use it.
- mini drone propellers 0.8 mm Mini paddles, made of durable and lightweight nylon plastic, are well-made and well-balanced, the other Arabic numerals on the A and B paddles have no representative meaning, and the word AB on the paddles shall prevail
- aeronautics drone blades 4 types of propellers to choose from, it needs to be accurate to the size of the center hole of your product and the length of the propeller blades to be used correctly, please carefully match the specifications you need
- rc glider propeller The package has 46MM with center hole 0.8MM/46MM with center hole 1.0MM, 42MM and 37MM are both with center hole 0.8MM, please carefully check the size of your product requirements.
- See more on Amazon...
Brand: skrnrhrery | Manufacturer: skrnrhrery
See On Amazon #10
XiaoPYo Propellers Blades Length 42mm for Mini Foldable RC Drone Mini Foldable RC Quadcopter Pocket Quadcopter Pocket Drone
Asin: B078P6VD4X | Model: 901S | PartNumber: 901S | Ean: 0678279395075 | UPC: 678279395075
Propeller Blade Compatible With E61hw E61h X300c Mini Drone Rc Nano Quadcopter 4Drc V2 Foldable Mini Drone.
Package Includes: 16Pcs Propeller Blade (Black & White & Blue & Orange).
Note: Please Note The Size ! Propeller Length: 42Mm & Motor Mounting Hole: 0.8Mm.
Propeller Blade Compatible With Holy Hs190 Hs190w Quadcopter Hs190 Foldable Mini Rc Drone.
Features
- Propeller Blade Compatible with 901S 901H 901HS Mini Quadcopter Drone Z2HC Mini Drone
- Propeller Blade Compatible with Holy HS190 HS190W Quadcopter HS190 Foldable Mini RC Drone
- Propeller Blade Compatible with E61HW E61H X300C Mini Drone RC Nano Quadcopter 4DRC V2 Foldable Mini Drone
- Note: Please note the Size ! Propeller Length: 42mm & Motor mounting Hole: 0.8mm
- Package includes: 16pcs Propeller Blade (Black & White & Blue & Orange)
- See more on Amazon...
Brand: No Brand | Manufacturer: XiaoPengYo
Dimensions: 0.20 x 3.50 x 2.40 Inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search