GEBSKI Relay Base SRC08 PCB 7760056111
Asin: B0CPSNQXKY | Model: GEBSKI | PartNumber: GEBSKI | Ean: 9053001574033
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: GEBSKI | Manufacturer: GEBSKI
Weight: 0.11 Pounds
See On Amazon Similar To GEBSKI Relay Base SRC08 PCB
#1
KeeYees 5pcs 1 Channel 5V Relay Module Board Shield KY-019 LED Indicator for Arduino + 3pcs 20CM 10Pin Female Male Jumper Wires
Asin: B07L6J6FHH | Model: KYES504-KY019-5 | PartNumber: KYES504-KY019-5 | Ean: 0705883356380 | UPC: 705883356380
No Need To Buy The Jumper Wires Extra, This Set Contains 20Cm 10Pin Female To Female, Female To Male, Male To Male Dupont Jumper Wires, With Which You Can Easier To Complete The Project..
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
Features
- The relay can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- No need to buy the Jumper Wires extra, this set contains 20cm 10Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #2
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
24V Fun Relay, 90-980 Isolation Relay AC Switch SPST with UL Certification Compatible with HVAC Furnace Blower Humidifier Goodman Blower Heat Sequencer Relay (1 Piece)
Asin: B09MVXSSP8
Ul Certification: The Product Has Excellent Tech Support, Heavy Duty And Waterproof Performance.
Easy To Install: 6 Wire Hook Up Terminals; Wiring Diagram Printed On Relay And Easy To Install, Just Make Sure You Follow The Wiring Diagram.
Quality Material: The Relay Is Compact In Structure And Light In Design, Allowing Quiet And Simple Operation.
Wide Application: Great Switch Solution Compatible With Hvac, Air Conditioning, Heating, Appliance, Fan Control, Coleman Furnace, Gas Furnace, Goodman Blower, Pump Start And So On.
Features
- Fan Relay: 90-380 type, 24VAC, 12FLA, 1 pole replacement Relays provide circuit protection for you
- Wide Application: great switch solution compatible with HVAC, air conditioning, heating, appliance, fan control, coleman furnace, gas furnace, goodman blower, pump start and so on
- UL Certification: the product has excellent tech support, heavy duty and waterproof performance
- Quality Material: the relay is compact in structure and light in design, allowing quiet and simple operation
- Easy to Install: 6 wire hook up terminals; Wiring diagram printed on relay and easy to install, just make sure you follow the wiring diagram
- See more on Amazon...
Brand: Dreyoo | Manufacturer: Dreyoo
See On Amazon #4
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load:The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 inches | Weight: 0.00 Pounds
Warranty: no
See On Amazon #5
AEDIKO 4pcs DC 12V Relay Module 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level
Asin: B095YFJ69T | Model: 14921 | PartNumber: 14921 | Ean: 0701715480605 | UPC: 701715480605
Optocoupler Isolation:1 Channel Relay Board Use Optocoupler Isolation That Has Strong Driving Ability And Stable Performance ,The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.
Wide Application: Dc 12V Relay Module Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
Jumper Design: The Relay Module Has A Jumper That You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Fault-Tolerant Design: Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed.
Features
- 12V Relay Module: Working Voltage: DC 12V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 12V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.72 x 1.90 x 1.02 inches
See On Amazon #6
5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Asin: B09G6H7JDT | Ean: 0734914033952 | UPC: 734914033952
【Adopted Smd Optocoupler Isolation& Jumper Set】- The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
【Humanization Design On Interfaces】- All Interfaces Can Be Directly Wired Out Through The Terminals.Fault-Tolerant Design;Fault-Tolerant Design,Even If The Control Line Is Broken, The Relay Will Not Operate..
【Wide Application】-These 5V Relay Board Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
【Main Specification】- Peak Load Of No Connector: Ac125~250V/10A, Dc28~30V/10A; Trigger Current: 5Ma;The Module Operating Voltage:12V; 4Pcs * 3.1 Mm Fixed Bolt Hole..
Features
- 5V 1 Channel Relay Module - This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
- Main Specification - Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- Adopted SMD Optocoupler Isolation& jumper Set - The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Wide Application -These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- Humanization Design On Interfaces - All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- See more on Amazon...
Brand: AZKO | Manufacturer: AZKO
Dimensions: 0.10 x 0.10 x 0.10 inches
See On Amazon #7
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32
Asin: B09ZQRLD95
With Power Indicator,8-Way Road Has A Status Indicator. With A Relay Coil To Absorb The Diode Protection..
The 8 Channels Are Optically Isolated, Safe, Reliable, Anti-Interference. Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control。For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Each Relay Has Normally Open And Normally Closed Contact. Can Be Selected By Jumper Relay And Ttl Or Ground..
Features
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #8
Electromagnetic Power Relay, 8-Pin 10 AMP 110V/120V AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ 2PCS [Applicable for DIN Rail System]
Asin: B0BND2FPZ3
Coil Voltage: 110V/120V Ac; Contact Capacity: 10A 240Vac With Din Rail And Self-Tapping Screws..
Led Signal Lamp : It Can Judge The Ac Or Dc Coil, And Judge Whether The Coil Is Energized.
Red Mechanical Indicatoe:It Can Intuitively Judge Whether The Relay Is Attracted.
Product Name: Electromagnetic Power Relay; Model: Yj2n-Ly Type: Dpdt; Number Of Terminals: 8.
Features
- Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc
- Product Name: Electromagnetic Power Relay; Model: YJ2N-LY Type: DPDT; number of terminals: 8
- Coil voltage: 110V/120V AC; Contact capacity: 10A 240VAC with din rail and self-tapping screws.
- Red mechanical indicatoe:It can intuitively judge whether the relay is attracted
- LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized
- See more on Amazon...
Brand: VAMRONE | Manufacturer: YYUAN
Dimensions: 2.50 x 3.00 x 0.90 inches
See On Amazon #9
SunFounder Lab 4 Relay Module 5V 4 Channels Relay Module Compatible with Arduino R3 1280 Arm PIC AVR STM32
Asin: B00E0NSORY | Ean: 0520141421286 | UPC: 520141421286
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic)..
Applications: Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control, Vcc System Power And So On..
Indication Led’S For Relay Output Status..
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A..
Features
- 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED s for Relay output status.
- Applications: Supports all MCU control, The industrial field, PLC control, Smart home control, VCC system Power and so on.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 3.20 x 2.90 Inches | Weight: 0.09 Pounds
See On Amazon #10
DaierTek 12V Relay with Built-in Diode & 12 AWG Harness Socket 30A/40A Heavy Duty SPDT 5 Pin Relay Switch Waterproof for Automotive Car Marine Boat -8pcs
Asin: B0BY8JRHZ3 | Model: JD1914-W12V-8Pcs | PartNumber: JD1914-W12V-8Pcs
【12Awg Harness】 - The Wires Which Come With This Relay Socket Are 12Awg/16Awg Design, The 12 Awg Wires Include Red, Blue And Yellow Wires Which Are The Wires For High Power Terminals Of The Spdt Relay; And 16 Awg White And Black Wires For The Coil Terminals..
【Wide Application】 - The Waterproof Relay 12V Acts As A Bridge Between Switches And Devices, Which Helps To Achieve Controlling High Rating Devices By Small Rating Switches, Suitable For Auto, Car, Truck, Marine Boat, Etc..
【Waterproof】 - This 5 Pin Relay 12V Has Seal Ring Inside The Harness Socket To Improve Its Waterproof Performance, Makes It Much Safer Under Moist Environment Use..
【Built-In Diode】 - This 12 Volt Relay Has A Built-In Diode, Which Aims To Consume The Induced Voltage That Is Generated By The Coil While Switching The Status Of Automotive Relay, And Therefore Protect The Electric Components From Being Damaged By The Induced Voltage..
Features
- 30A/40A Relay - These 5 pin relays are rated at 12v 30A/40A (NO: 40A, NC: 30A), spdt heavy duty design relay switch.
- Built-in Diode - This 12 volt relay has a built-in diode, which aims to consume the induced voltage that is generated by the coil while switching the status of automotive relay, and therefore protect the electric components from being damaged by the induced voltage.
- 12AWG Harness - The wires which come with this relay socket are 12AWG/16AWG design, the 12 awg wires include red, blue and yellow wires which are the wires for high power terminals of the spdt relay; and 16 awg white and black wires for the coil terminals.
- Waterproof - This 5 pin relay 12v has seal ring inside the harness socket to improve its waterproof performance, makes it much safer under moist environment use.
- Wide Application - The waterproof relay 12v acts as a bridge between switches and devices, which helps to achieve controlling high rating devices by small rating switches, suitable for auto, car, truck, marine boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DaierTek
Dimensions: 2.28 x 9.76 x 5.28 inches
See On Amazon #11
mxuteuk 2pcs JQX-13FL AC 110V/120V Coil 8 Pin 10A DPDT LED Indicator Electromagnetic Power Relay, with Base, with DIN Rail Slotted Aluminum
Asin: B07QXWZP3R | Model: 13 | PartNumber: 13 | Ean: 0741416011425 | UPC: 741416011425
Coil Voltage:Ac 110V; Contact Capacity: 10A 250Vac/10A 28Vdc;.
Package Content : 2 X Power Relay + 2 X Socket + 1 X Rail Slotted Aluminum + 2 X Screw.
Overall Size(Approx. ): 79 X 28 X 64Mm/3.1" X 1.1" X 2. 5"(L*W*H).
Mount Rail Type : 35Mm Din Rail; Din Rail Length : 100Mm/4"(L).
Features
- Product Name:Electromagnetic Power Relay; Relay Model : JQX-13FL; Type : DPDT(2NO 2NC); Number of Terminals : 8 ; Socket Model : PTF08A-E
- Mount Rail Type : 35mm DIN Rail; DIN Rail length : 100mm/4(L)
- Coil Voltage:AC 110V; Contact Capacity: 10A 250VAC/10A 28VDC;
- Overall size(approx. ): 79 x 28 x 64mm/3.1 x 1.1 x 2. 5(L*w*h)
- Package Content : 2 x Power Relay + 2 x Socket + 1 x Rail Slotted Aluminum + 2 x Screw
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #12
HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level Trigger Module Triggered by DC 12V
Asin: B00LW15F42 | Model: 3-01-0342 | PartNumber: 3-01-0342 | Ean: 0702082655962 | UPC: 702082655962
The Module Can Be High Or Low By A Jumper Setting Trigger;.
Fault-Tolerant Design , Even If The Control Line Is Broken , The Relay Will Not Operate ;.
Interface Design Humane, All Interfaces Can Be Connected Directly Via Terminal Wiring Leads , Very Convenient ;.
With Patch Optical Isolation, Strong Drive Ability And Stable Performance;.
Features
- Can set high or low level trigger with jumper, to meet the demand of more trigger applications;
- With patch optical isolation, strong drive ability and stable performance;
- The module can be high or low by a jumper setting trigger;
- Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient ;
- Fault-tolerant design , even if the control line is broken , the relay will not operate ;
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.72 x 2.00 x 1.60 inches | Weight: 0.11 pounds
See On Amazon #13
HiLetgo 12V 1 Channel Relay Module with Optocoupler Isolation Support High or Low Level Trigger
Asin: B00LW15D1M | Model: 3-01-0341 | PartNumber: 3-01-0341 | Ean: 0702082655955 | UPC: 702082655955
Module Can Be Set By Jumper High Or Low Trigger.
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
Using Optocoupler Chip Isolation, Strong Drive Capability, Stable Performance; Trigger Current 5Ma.
Features
- Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
- Using optocoupler chip isolation, strong drive capability, stable performance; trigger current 5mA
- Module can be set by jumper high or low trigger
- Fault-tolerant design, even if the control line is broken, the relay will not move
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage
Asin: B089Q6KLPQ | Model: F-1022 Series | PartNumber: F-1022 Series | Ean: 6954525591007
Compact Plastic Case And Wires Connects For Easy Mount. Led Indication For Relay Action..
This Is A Simple And Practical Passive Relay Module, Which Is Very Convenient To Use. It Can Support Both Normally Open And Normally Close. Two Screw Mounting Holes Are Convenient For You To Fix It On The Wall Or Wooden Board. Of Course, You Can Also Choose Not To Lock The Screw..
Output Switch Dpst 1No 1Nc(Double Pole Single Throw, 1X Normally Open And 1X Normally Close ), Rated Current 8A/250Vac Or 8A/30Vdc (One Switch)..
Features
- Input control signal: Voltage AC or DC 12V, Current 33mA.
- Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
- Compact plastic case and wires connects for easy mount. LED indication for relay action.
- This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #15
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #16
SainSmart 16-Channel 12V Relay Module Board for Arduino DSP AVR PIC ARM
Asin: B0057OC66U | Model: 101-70-103 | PartNumber: 101-70-103 | Ean: 0796793392285, 6952131721337 | UPC: 796793392285
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp433, Ttl Logic).
Indication Led's For Relay Output Status.
Equipped With High-Current Relay, Ac250v 10A ; Dc30v 12A.
Features
- 12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 12A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic)
- Indication LED's for Relay output status
- See more on Amazon...
First Available: 05/06/2018
Brand: SainSmart | Manufacturer: SainStore Inc.
Dimensions: 1.19 x 8.00 x 5.70 inches | Weight: 0.55 Pounds
See On Amazon #17
HiLetgo 2pcs 12V Single Bistable Self-Locking Relay Module Push to Start and Stop
Asin: B01HHM5M4M | Model: 3-01-0824-A | PartNumber: 3-01-0824-A
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
mxuteuk 2pcs AC 110V/120V Coil 8 Pin 10A DPDT LED Indicator Electromagnetic Power Relay General Purpose JQX-13F-DZ-AC110V
Asin: B08HLXQPRP | Model: JQX-13F-DZ-AC110V | PartNumber: JQX-13F-DZ-AC110V
Coil Voltage:Ac 110V; Contact Capacity: 10A 6V-380Vac/10A 6V-220Vdc;.
Package Content : 2Pcs X Power Relay + 16Pcs X Terminals.
Overall Size(Approx. ): 86 X 56 X 28Mm/ 3.39 X 2.2 X 1.1 Inches(L*W*H);.
Relay Model : Jqx-13Fl; Type : Dpdt(2No 2Nc); Number Of Terminals : 8 ;.
Features
- Product Name:Electromagnetic Power Relay;
- Relay Model : JQX-13FL; Type : DPDT(2NO 2NC); Number of Terminals : 8 ;
- Coil Voltage:AC 110V; Contact Capacity: 10A 6V-380VAC/10A 6V-220VDC;
- Overall size(approx. ): 86 x 56 x 28mm/ 3.39 x 2.2 x 1.1 inches(L*w*h);
- Package Content : 2pcs x Power Relay + 16pcs x Terminals
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #19
TWTADE/JTX-2C, MK2P-I DPDT Power Relay with Plug-in Terminal Socket Base, AC 110V Coil, 8 Pin 2NO 2NC (Quality Assurance for 1 Years) AC 110V
Asin: B07FCHQBKG | Model: AC 110V | PartNumber: AC 110V | Ean: 0673257216595 | UPC: 673257216595
Contact Capacity: 250Vac/28Vdc 10A Res; 250Vac 7A Gen.
Weight: 104G; Package Content: 1 X Electromagnetic Relay.
Total Size (Approx. ): 34 X 34 X 67Mm/ 1. 4" X 1. 4" X 2. 6" (L*W*H); Socket Size: 5. 5 X 4 X 2. 1Cm/2. 2" X 1. 6" X 0. 86"(L*W*T).
Wiring Description For Example: 2,3,4 This Contact, 3 And 2 Are Normally Open, 3 And 4 Are Normally Closed. Contact: Dpdt 2No 2Nc; Number Of Pins: 8.
Features
- Product Name: Electromagnetic Relay; Coil Voltage: AC110V; Model : JTX-2C;
- Wiring description For example: 2,3,4 This contact, 3 and 2 are normally open, 3 and 4 are normally closed. Contact: DPDT 2NO 2NC; Number of Pins: 8
- Contact Capacity: 250VAC/28VDC 10A RES; 250VAC 7A GEN
- Total Size (Approx. ): 34 x 34 x 67mm/ 1. 4 x 1. 4 x 2. 6 (L*W*H); Socket Size: 5. 5 x 4 x 2. 1cm/2. 2 x 1. 6 x 0. 86(L*W*T)
- Weight: 104g; Package Content: 1 x Electromagnetic Relay
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon #20
TWTADE/DC 12V Relay 10A Electromagnetic Power Coil Relay 8 Pins DPDT 2NO 2NC with Indicator Light and Socket Base -YJ2N-LY
Asin: B07C78SLKD | Model: YJ2N-LY DC12V | PartNumber: YJ2N-LY DC12V | Ean: 0634759527794 | UPC: 634759527794
Coil Voltage: Dc 12V; Contact Capacity: 10A 240Vac /28Vdc..
Package Content: 1 X Electromagnetic Relay + 1 X Socket + 1 X Base Hook.
Type: Dpdt(2No 2Nc); Pins: 8 Pin; Mount Type: 35Mm Din Rail Relay Size: 2.6 X 2 X 3.5Cm / 1" X 0.8" X 1.4" (L*W*H); Socket Size: 7.7 X 2.4 X 2.7Cm / 3.03" X 0.94" X 1" (L*W*H); Total Height: 6.5Cm / 2.5".
Main Color: Grey; Indicator Light: Ac Coil: Red Lamp, Dc Coil: Green Lamp; It Can Be Seen Whether The Coil Is Energized..
Features
- Product Name: Electromagnetic Relay; Model No.: YJ2N-LY; Socket Model No.: YJTF08A-E; Wiring description For example: 1,3,5 This contact, 3 and 5 are normally open, 1 and 5 are normally closed.
- Main Color: Grey; Indicator light: AC Coil: Red lamp, DC Coil: Green lamp; It can be seen whether the coil is energized.
- Coil Voltage: DC 12V; Contact Capacity: 10A 240VAC /28VDC.
- Type: DPDT(2NO 2NC); Pins: 8 Pin; Mount Type: 35mm DIN Rail Relay Size: 2.6 x 2 x 3.5cm / 1 x 0.8 x 1.4 (L*W*H); Socket Size: 7.7 x 2.4 x 2.7cm / 3.03 x 0.94 x 1 (L*W*H); Total Height: 6.5cm / 2.5
- Package Content: 1 x Electromagnetic Relay + 1 x Socket + 1 x Base hook
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon
Looking For Something Else?
Search