Upgrade Ender 3 Hotend, CR-10/CR-10 V2 Hotend Assembled MK8 Extruder 3D Printer Hotend Kit 24V 40W Compatible for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5, CR10/CR-10 V2/CR-10 V3 3D Printer,
Asin: B0CPXZKHPW
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Metal Ender 3 Pro Hotend Kit Is Safe And Reliable, Which Can Withstand Higher Temperatures, Allowing You To Print Filaments With High Temperature Requirements At Will After Replacement, Such As Abs, Nylon, Polycarbonate And More..
Tips: It Is Suggested To Re-Check The 3D Printer Heatbed Level After Install The New 3D Printer Hotend Or Nozzle, To Avoid The Nozzle Scratch 3D Printer Heatbed..
24V 3D Printer Heater Wire And 100K Thermistor Wire Are With Fast Replace Plug Connectors,Easier To Fast Replace Or Remove The Hotend In Any Cases..
3D Printer Hot End Kit Compatible With 3D Printer Ender 3 / Ender 3 Pro / Ender 3X /Ender 3 V2, Ender 5, Creality Cr-10, Cr-10-S5, Cr-10-S4, Cr-10S, Cr-10 Mini, Cr-20, Cr-20 Pro Cr-10 V2/Cr-10 V3, Etc..
Features
- Package included: 1 Ender 3 Hot end Kit Upgraded, 24V 40W Assembled MK8 Extruder Hot End Kit. with NTC 3950 100K Thermistor and 24v 40w heater wire, 0.5m Teflon Tube.
- 3D Printer Hot end Kit Compatible with 3D Printer Ender 3 / Ender 3 Pro / Ender 3X /Ender 3 V2, Ender 5, Creality CR-10, CR-10-S5, CR-10-S4, CR-10S, CR-10 MINI, CR-20, CR-20 Pro CR-10 V2/CR-10 V3, etc.
- This Metal Ender 3 Pro Hotend Kit is safe and reliable, which can withstand higher temperatures, allowing you to print filaments with high temperature requirements at will after replacement, such as ABS, nylon, polycarbonate and more.
- 24V 3D Printer Heater Wire and 100K Thermistor Wire are with fast replace plug connectors,easier to fast replace or remove the hotend in any cases.
- Tips: It is suggested to re-check the 3D Printer heatbed level after install the new 3D Printer hotend or nozzle, to avoid the nozzle scratch 3D Printer heatbed.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon Similar To Upgrade Ender 3 Hotend CR10
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 inches | Weight: 0.55 Pounds
See On Amazon #2
Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer
Asin: B086YPDHMF
Pc4-M6 Couplers: Thread M6/3Mm, Inner Diameter 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm, Made Of Premium Copper And Plastic, Sturdy And Durable. Pc4-M10 Couplers: Thread M10/6Mm, Inner Diameter 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm, Made Of High Qulity Stainless Steel And Plastic, High Hardness, Antioxidtion, Anti Corrosion. The Extruder Fittings Are Pc4-M6 And The Hotend Fittings Are Pc4-M10..
Any Questions Please Feel Free To Contact Us At Any Time. We Will Reply To You Within 24 Hours And Provide Technical Support For You..
One Ptfe Cutter With An Extra Sharp Razor Is Also Included To Ensure That The Ptfe Is Cut Flat On Both Sides To Prevent Any Malfunctions Or Heat Creep When Feeding And Retracting..
Capricorn Ptfe Is Well Regarded As The Highest Quality Ptfe Tubing In All Of 3D Printing. The Tight Tolerances Make Sure That The Filament Is Lead Directly To The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend. Capricorn Ptfe Xs Series Is Rated For Withstanding The Highest Temperatures In The Market Which Is Perfect For Printing Exotic Filaments Such As Abs, Nylon, And Polycarbonate..
Features
- 100% Original Capricorn XS Series tubing.
- Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.
- PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
- One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
- Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #3
Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/5 Pro/Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
Asin: B0B9LYZSKC
Strong Practicability - Storage Box For Easy Carrying And Storage Of Small Accessories.The Nozzle Cleaning Needle Is Made Of High-Quality Stainless Steel With Good Toughness And Is Not Easy To Break, And The Nozzle Can Be Cleaned From Multiple Angles.The Hexagon Wrench Makes The Adjustment Of The Nozzle Easier..
Wide Compatibility - Suitable For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo And Cr 10 Series 3D Printers.Compatible With All 1.75Mm Pla Abs Filament 3D Printers..
High Precision - Input Diameter 1.75Mm, Smooth Inner Wall, Extruder Nozzle Diameter Error Less Than 0.02 Mm.Greatly Reduces The Risk Of Print Head Leaks And Avoids Nozzle Clogging..
Package List - The 3D Printer Extruder Nozzles Come With 0.4 Mm Brass Nozzles*25, Nozzle Cleaning Needles*10, Hexagon Wrench*1, Stainless Steel Tweezers*1, And A Storage Box..
Features
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing.
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box.
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier.
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging.
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #4
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2ïŒIts Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #5
AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters White Connector Tubing for 3D Printer
Asin: B01CUPV9KC | Model: PRTPTS-BDN20-005 | PartNumber: PRTPTS-BDN20-005 | Ean: 0756519721010 | UPC: 756519721010
High Spec: Withstanding Temperatures Up To 260C, This Bowden Connector Tubing Has A Density Of 2.15-2.20G/Cm3, With A 2Mm Id And 4Mm Od..
Amx3d Accessories: The Best 3D Prints Start With The Best Tools! Amx3d Provides 3D Printing Partsof The Highest Quality. If There Are Any Problems With Your Bowden Tube Just Let Us Know!.
Flexible Tubing: Ptfe Bowden Tubes Offer Impressive Flexibility â Ideal For Smoothly Tracking The Moving 3D Printer Head. Packaged Without Ties To Prevent Crimping..
Low Friction: Made From High Quality, Durable Ptfe, The Teflon Bowden Tube Allows Filament To Slide Better For Smoother Results..
Features
- IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality.
- LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results.
- HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD.
- FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping.
- AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!
- See more on Amazon...
Brand: AMX3d | Manufacturer: AMX3d
See On Amazon #6
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
ðãImproved PerformanceãThe Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
ðãAfter Sales SupportãMore Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via âAsk A Questionâ Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
ðãEasy To InstallãDiy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
ðãWork BetterãOur 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #7
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 Pounds
See On Amazon #8
Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B09DVYZSYJ | Model: CRTOUCH | PartNumber: CRTOUCH
ãIndependent Research And Development Stable FunctionãCr Touch Is A Creality 3D Research Institute Self-Developed 3D Printer Platform Leveling Solution Based On Hundreds Of Millions Of User Data Used By The Creators. Compared With The Traditional Automatic Leveling , It Is Compatible With More 3D Printer Platforms, More Stable And Cose-Effective. With Stable Quality And Long Service Life, It Can Be Reused For More Than 100,000 Times..
ãStrong CompatibilityãCreality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
ãPackage Includeã1*Cr Touch Auto Leveling Sensor, 5*0.4Mm Nozzle, 3*Moounting Brackets, 1*Installation Guide, 3*Tie And 4*Screw.
ãMulti-Point Detection Smart CompensationãCr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
ãAbout Reflash The Firmwareã1. Download The Corresponding Firmware From The Creality Official Website. 2. Copy It To The Sd Card. 3. Rename It To 123.Bin, 4. Insert The Sd Card Into The Printer, 5. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Wide Application This Creality cr touch auto-leveling kit is equipped with 3 mounting brackets and is only suitable for the following 3D printers with V4.4.2/V4.2.7 motherboards (Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/cr 10), other machines are not compatible. Please confirm your machine and motherboard version before purchasing.
- About Reflash the Firmware 1. Download the corresponding firmware from the Creality official website. 2. copy it to the SD card. 3. Rename it to 123.bin, 4. Insert the SD card into the printer, 5. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct CR touch firmware).
- Independent research and development Stable function CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- Multi-point detection Smart compensation CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Strong compatibility Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- Package Include 1*CR Touch Auto Leveling Sensor, 5*0.4mm Nozzle, 3*Moounting brackets, 1*Installation Guide, 3*Tie and 4*Screw
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.29 Pounds
See On Amazon #9
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #10
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #11
Creality Ender 3 Auto Bed Leveling Kit, Official CR Touch for Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard, 3D Printer Leveler Sensor Tool Kit Silicone Mounts
Asin: B0BXGCHZDL
More Professional Design: Compared With The Old Bl Touch, The New Cr Touch Uses A Combination Of Optical And Metal Probes, Which Increases The Service Life And Reduces Errors Caused By Magnetic Fields And Temperatures. 3D Automatic Bed Leveling Is Compatible With Pei, Stickers, Glass, Metal Platform. The Number Of Detections Has Reached A Revolutionary 100,000 Times, And The Positioning Accuracy Is â€0.04Mm..
Package Includes: 1*Cr Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4M Power Cord, 3*Tie Straps, 4*Screws. Download The Firmware From The Official Website Of Creality And Copy It To The Blank Sd Card, Insert It Into The Card Slot Of The 3D Printer, Turn On The Power, And The Printer Will Read And Install The Firmware..
Strong Compatibility: Cr Touch Is An Automatic Leveler Specially Designed For Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/Cr-10 Models, Only Applicable To 32-Bit V4.2.2 And V4.2.7 Motherboards. The Included 3 Brackets Can Be Easily Installed On The Above Models..
Automatic Leveling: Cr Touch Conducts Multi-Point Detection On The Printing Platform, Records The Distance Of Each Point, And Constructs A Virtual Plane. Carry Out Distance Compensation Calculation When Printing, And Automatically Adjust The Nozzle Distance. Matched With The Silicone Leveling Column, It Can Be Leveled For A Long Time After One Leveling. Multiple Use Only Needs To Be Checked With Cr Touch..
Features
- After-sales Service: In order to let more 3D printing enthusiasts enjoy the comfort of CR Touch, we wholeheartedly provide you with 24-hour online after-sales service. Regardless of the various problems you encounter during the installation and use of CR Touch, please contact us in time, and our professional technical team will provide you with detailed solutions.
- Automatic Leveling: CR Touch conducts multi-point detection on the printing platform, records the distance of each point, and constructs a virtual plane. Carry out distance compensation calculation when printing, and automatically adjust the nozzle distance. Matched with the silicone leveling column, it can be leveled for a long time after one leveling. Multiple use only needs to be checked with CR Touch.
- More Professional Design: Compared with the old BL Touch, the new CR Touch uses a combination of optical and metal probes, which increases the service life and reduces errors caused by magnetic fields and temperatures. 3D automatic bed leveling is compatible with PEI, Stickers, Glass, Metal platform. The number of detections has reached a revolutionary 100,000 times, and the positioning accuracy is 0.04mm.
- Strong Compatibility: CR Touch is an automatic leveler specially designed for Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/CR-10 models, Only applicable to 32-bit V4.2.2 and V4.2.7 motherboards. The included 3 brackets can be easily installed on the above models.
- Package Includes: 1*CR Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4m Power Cord, 3*Tie Straps, 4*Screws. Download the firmware from the official website of Creality and copy it to the blank SD card, insert it into the card slot of the 3D printer, turn on the power, and the printer will read and install the firmware.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #12
25 PCS 3D Printer Brass Nozzles 0.4mm, Fosvrde MK8 Ender 3 Nozzles Extruders for with DIY Tools and Metal Storage Box for Ender 3/Ender 3 Pro/Ender 3 V2 CR-10
Asin: B0CR8KDRSM
ãProduct Featureã-The Brass Nozzle Shape Is Smooth And Bright With Lettering, Let You Better Distinguish The Details See The Quality. The Inner Wall Is Smooth And Smooth, The Cutting Chamfer Joint Is Closely Fitted, Avoid Filament Getting Stuck On Nozzle, So It Reduces The Risk Of Printhead Leakage Greatly And Avoid Nozzles Clogging..
ãWide Compatibilityã-The For 3D Printer Mk8 Suitable For 3D Printer Mk8 Cr-10, Are Compatible With For Ender 3/Ender 3 Pro/Ender 3S/Ender 3 V2 Cr-10 And Compatible With Most 1.75Mm 3D Printers.
ãProduct Parameterã- Input Diameter 0.2Mm, Output Diameter 1.75Mm, Out Thread M6, Diameter 0.4 Mm, The Outer Surface Is Marked With A Size, So You Can Easily Identify The Specifications Of The Nozzle..
ãValue For Moneyãã- Mk8 Nozzles Kit Come With 25 Nozzle Pieces, But It Also Includes 5 Nozzle Cleaners And 1 Hexagon Wrench,1 Stainless Steel Tweezers. These Accessories Make It Easier For You To Maintain And Clean Your Printer For Optimal Performance..
Features
- Premium quality materials - The Fosvrde 25PCS MK8 nozzles made of high-quality brass material, faster heat conduction and corrosion resistance, achieve high-quality printing.
- Value for money - MK8 nozzles kit come with 25 nozzle pieces, but it also includes 5 nozzle cleaners and 1 hexagon wrench,1 stainless steel tweezers. these accessories make it easier for you to maintain and clean your printer for optimal performance.
- Product feature -The brass nozzle shape is smooth and bright with lettering, Let you better distinguish the details see the quality. the inner wall is smooth and smooth, the cutting chamfer joint is closely fitted, avoid filament getting stuck on nozzle, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Product parameter - Input diameter 0.2mm, output diameter 1.75mm, out thread M6, diameter 0.4 mm, the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Wide compatibility -The for 3D Printer MK8 Suitable for 3D printer MK8 CR-10, are compatible with for Ender 3/Ender 3 Pro/Ender 3s/Ender 3 V2 CR-10 and Compatible with most 1.75mm 3D printers
- See more on Amazon...
Brand: Fosvrde | Manufacturer: Fosvrde
Dimensions: 0.70 x 7.00 x 1.50 inches | Weight: 0.30 pounds
See On Amazon #13
Creality Official 42-40 Stepper Motor with Extruder Gear, 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder, Compatible with E-axis of Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/CR-10 3D Printer
Asin: B09ZQT9DJY
High-Quality Stepping Motor: With Low Power, Stable Speed And Performance, Low Noise, And No Step Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
After-Sales Service: If You Have Any Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Low Noise & High Precision: It Fits Perfectly With The High-Strength Synchronous Wheel And Synchronous Gear, Which Ensures Its High Precision, Reduces Vibration And Noise During Work, And Provides You With A Relatively Quiet Printing Environment..
Parameter: 1.8-Degree Step Angle, 0.4 N.M Holding Torque, With 1A Rated Current Per Phase. (The Connecting Cable Is Not Included.).
Features
- Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer.
- Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.)
- High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low Noise & High Precision: It fits perfectly with the high-strength synchronous wheel and synchronous gear, which ensures its high precision, reduces vibration and noise during work, and provides you with a relatively quiet printing environment.
- After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 2.36 x 1.65 x 1.65 inches
See On Amazon #14
Mudder Hardened Steel Nozzle 0.4 Mm/ 1.75 mm 3D Printer Mk8 Nozzles High Temperature Wear Resistant Compatible with Ender 3/ Ender3 Pro, Prusa I3, Makerbot Creality Cr-10 All Metal Hotend
Asin: B089ZY11DD
High Precision: The Inner Wall Of The Mk8 Nozzles Is Smooth And Has No Burrs, The Viscosity Coefficient Is Small, Extruder Nozzle Diameter Error Less Than 0.02 Mm, Provide You A Accurate And Smooth Extrusion.
What You Get: Package Comes With 5 Pieces Of Black Mk8 Nozzles, The Size Is 0.4 Mm, Sufficient Quantity To Facilitate Your Timely Replacement, Achieving Quality Printing.
Compatibility: These 3D Printer Nozzles Compatible With Mk8 Hotend For Creality 3D Printers, Such As Ender-2/ Ender-3/ Ender-3 Pro/ Ender-5, Also Compatible With Creality Cr-10 All-Metal Hotend, Prusa I3, Anet A8, Reprap, Etc..
Good Performance: This Hardened Tool Steel Nozzle Has Higher Toughness And Hardness, Not Only Suitable For Common 1.75 Mm 3D Printer Filaments, But Also Can Print Filaments Of Carbon Fiber, Fiberglass, Etc..
Features
- Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy construction makes them durable to serve you for long time, suitable for 3D printing at high temperature
- Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can print filaments of carbon fiber, fiberglass, etc.
- High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less than 0.02 mm, provide you a accurate and smooth extrusion
- Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also compatible with Creality CR-10 all-metal hotend, Prusa i3, Anet A8, Reprap, etc.
- What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement, achieving quality printing
- See more on Amazon...
Brand: Mudder | Manufacturer: Mudder
See On Amazon #15
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
ãSmooth Runningã Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
ãAfter Sales ServiceãCreality 3D Pay Great Attention To The BuyerâS User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
ãHigh ComparableãThe Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
ãStable Performanceã Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 Inches | Weight: 2.01 pounds
See On Amazon #16
Official Creality 3D Printer Ender 3 0.4mm 5PCS Brass Hotend Nozzles for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series and CR 10 Series
Asin: B09W2J7P5X | Model: CR-NOZZLES-0.4MM | PartNumber: CR-NOZZLES-0.4MM
ãApplicability And CompatibilityãMk8 Extruder Nozzles Fit For 3D Printers Like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/Cr 10 Series, Compatible With All 1.75Mm Pla Abs 3D Printers. Fit Exactly Like The Original..
ãAfter Sales ServiceãWe Pay Great Attention To The BuyerâS User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
ãPackage IncludeãPrinter Nozzles Come With 5 Pieces Of Mk8 Nozzles In 0.4Mm.
ãPrecise Designã3D Printer Nozzles Can Prevent The Print Head Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish. Reduce The Resistance From The Corners And Avoid Blocking The Filament With A Rounded Chamfer. Easy To Identify With Engraving The Size On Each Nozzle..
Features
- Quality Assurance MK8 nozzles are made of high-quality brass material. Heavy duty and provide a long service life. Easy to install and change.
- Precise Design 3d printer nozzles can prevent the print head leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer. Easy to identify with engraving the size on each nozzle.
- Applicability and Compatibility MK8 extruder nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original.
- Package Include Printer nozzles come with 5 pieces of MK8 nozzles in 0.4mm
- After Sales Service We pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality
See On Amazon #17
3D Printer Hotend Silicone Sock, 6 PCS Heater Block Silicone Cover for Creality Ender 3/3 Pro/3 V2, Ender 5/5 Plus/ 5 Pro, CR 10 Series, MK7/ 8/9 3D Printer Hotend
Asin: B09VKZJKQ2 | Model: KITANIS-3d-Printer Hotend | PartNumber: KITANIS-3d-Printer Hotend | Ean: 0785691706164 | UPC: 785691706164
Upgraded Material:3D Printer Hotend Silicone Sock Is Made Of Heat-Resistant, Non-Stick Silicone Material, High-Temperature Resistance: 280â. Good For Keeping The Hot End Clean And Temperature Stable..
Customer ProtectionïŒOur 3D Printer Accessories Use High-Quality Silicone Materials And Fine Workmanship, If You Have Any Questions About Our Product, Please Feel Free To Contact Us, We Will Do Our Best For You..
Package Included:6 Pcs Silicone Cover For Mk7, Mk8, Mk9 Hotend Heater BlockïŒIt Has Good Flexibility And Can Be Placed Close To The Heating Block, And Easy To Install, Stable And Not Easy To Fall Off, Very Strong..
Function:The Silicone Cover Will Keep Your Heater Block Clean And Repel Plastic Of Burnt, Blackened, And Build-Up, So That Can Extend The Life Of The Heater Block And Extruder; And Helps To Keep The Hotend Temperature Stable..
Features
- Compatibility The Heater Block Silicone Sock fit for Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro/5 Plus, CR-10/CR-10S/CR-10 S4/CR-10 S5/CR-10 mini, Ender-2, Anet A8, etc. MK7, MK8, MK9 hotend.
- Function:The Silicone Cover will keep your heater block clean and repel plastic of burnt, blackened, and build-up, so that can extend the life of the heater block and extruder; and helps to keep the hotend temperature stable.
- Upgraded Material:3D Printer Hotend Silicone Sock is made of heat-resistant, non-stick silicone material, high-temperature resistance: 280 . Good for keeping the hot end clean and temperature stable.
- Package included:6 Pcs Silicone Cover for MK7, MK8, MK9 hotend heater block it has good flexibility and can be placed close to the heating block, and easy to install, stable and not easy to fall off, very strong.
- Customer Protection Our 3D Printer Accessories use high-quality silicone materials and fine workmanship, If you have any questions about our product, please feel free to contact us, we will do our best for you.
- See more on Amazon...
Brand: KITANIS | Manufacturer: KITANIS
See On Amazon #18
5PCS Creality 3D Printer NTC Thermistor 100K, NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 3 Max/Voxelab Aquila, XH2.54-2P Connector (1.3m/51.1inch)
Asin: B0714MR5BC | Model: 3D-RMDZ-5PCS | PartNumber: 3D-RMDZ-5PCS | Ean: 0649910034431 | UPC: 649910034431
Ntc Thermistor: Used For Heated Bed Or Hot End. Our Ender 3 Pro Thermistor Replacement Is Compatible With Most 3D Printers..
After-Sales Service: If You Have Any Unsolvable Problems While Using The Ender 3 Thermistor Replacement, Please Feel Free To Contact Us. Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Long Life Service: High Precision, High Sensitivity, And Fast Temperature Conduction, High-Temperature Resistance..
Note Before Buying: Our Ender 3 Thermistor Is Not Fit For Ender 3 V2/Ender 3S/Cr-10S Pro V2/Cr-10S Pro/Ender 2 Pro/Ender 6/Prusa I3 3D Printer. Please Measure The Length Of Your 3D Printer's Thermistor And Confirm Whether This Thermistor Is Compatible With Yours Before Buying..
Features
- Wire Length: 51.1inch /1.3m. The package includes 5 3D printer thermistors. 2-pin XH2.54 female connector.
- Note Before Buying: Our Ender 3 thermistor is not fit for Ender 3 V2/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3D printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
- NTC Thermistor: Used for heated bed or hot end. Our Ender 3 pro thermistor replacement is compatible with most 3D printers.
- Long Life Service: High precision, high sensitivity, and fast temperature conduction, high-temperature resistance.
- After-sales Service: If you have any unsolvable problems while using the Ender 3 thermistor replacement, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Comgrow
See On Amazon #19
Creality Original 3D Printer NTC100K Thermistor Temp Sensor 5 Pack Quick Replacement Single Ended Glass Sealed for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer(30cm/11.8inch)
Asin: B0BJJQGC17 | Model: 3D-Thermistor-5P | PartNumber: 3D-Thermistor-5P
ð¡ãSingle-Ended Glass SealedãThe Glass Material Used In The Package Ensures The Maximum Service Life With Precision Temperature Measurement, Resistance To High Temperatures, And Fast Temperature Conduction..
ð¡ãOfficial Creality 3D StoreãOfficial Creality 3D Store! We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via âAsk A Questionâ Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
ð¡ãEasy To InstallãOnly 4 Steps To Install, No Need To Disassemble The Motherboard And Wire Harness, Fast Wiring Just Replace The Thermistor Directly. There Is A Tin Ring Inside, Waterproof Hot Melt Glue, No Welding, Sealing And Waterproof, Anti-Leakage, High-Temperature Resistance..
ð¡ãThe Temperature Measurementã -30 °C ~ +300 °C, Can Replace The Original Creality 3D Printer Nct Thermistor. Fit For Printing High-Temperature Filament..
Features
- Upgrade NTC Thermistor 100% Official Creality 3D Printer thermistor used for hotbed or hotend. Single-ended glass sealed temperature measurement. Compatible with Ender 3 series, Ender 5 series, Ender-6, and part of CR 10 series.
- The Temperature Measurement -30 C ~ +300 C, can replace the original Creality 3D Printer NCT thermistor. Fit for printing high-temperature filament.
- Single-ended Glass Sealed The glass material used in the package ensures the maximum service life with precision temperature measurement, resistance to high temperatures, and fast temperature conduction.
- Easy to Install Only 4 steps to install, no need to disassemble the motherboard and wire harness, fast wiring just replace the thermistor directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance.
- Official Creality 3D Store Official Creality 3D Store! We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #20
4PCS Official Creality 3D Printer Hotend Silicone Sock Heater Block Silicone Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 Pro/CR-10 10S S4 S5
Asin: B07N18BZQM | Model: CA-GJT | PartNumber: CA-GJT
This Is A Great Replacement For The Easily Worn And Torn Kapton Tape And Heat Resistant Cotton That Come With Any 3D Printers. This Silicone Sock Is Much More Durable And Functional When Compared To Typical Stock Soloutions For Hotend Insulation..
Any Accessories In Our Store Have Been Extensively Tested On All Comgrow Brand Products..
With This Sock You Can Safely Print More Exotic Materials Such As Petg At Higher Temperatures While Also Using The Cooling Fans At Full Speed. Actively Keeping The Hotend Very Hot And Cooling The Petg Much Quicker Before It Is Laid Onto The Hotbed Can Help With Success Rates On More Prints..
Hotend Socks Can Be Used To Quickly Heat The Hotend To A Desired Temperature As The Structure Of The Silicone Inside The Sock Prevents Heat From Escaping Quickly..
Features
- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
- With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints.
- Any accessories in our store have been extensively tested on all Comgrow brand products.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.50 x 0.90 x 0.90 inches | Weight: 0.04 pounds
See On Amazon 
Looking For Something Else?
Search