DiGiYes 5Pcs 3.3V/5V Analog Ceramic Piezo Vibration Sensor Module Fit for Arduino DIY Kit, Analog Signal Output Piezoelectric Sensor
Asin: B0CQ4BZJVB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Working Voltage: 3.3V Or 5V. Working Current: 1Ma. Interface Type: Analog Output..
Piezoelectric Ceramics Not Only Have Piezoelectric Properties, But Also Have Dielectric Properties, Elasticity, Etc. They Have Been Widely Used In Sonar Imaging, Acoustic Sensors, Acoustic Transducer, Ultrasonic Motors, And Other Fields..
The S Port Is Connected To The Analog Input Pin Of The Controller. 5V And Gnd Are Respectively Connected To The+5V And Gnd Of The Power Supply..
Simulated Piezoelectric Ceramic Vibration Sensor Is A Reverse Process That Uses Piezoelectric Ceramics To Generate Vibrations For Electrical Signals. When The Piezoelectric Ceramic Plate Vibrates, An Electrical Signal Is Generated. When Combined With The Sensor Expansion Board V5.0, The Analog Port Can Sense Weak Vibration Electrical Signals And Achieve Interactive Works Related To Vibration, Such As Electronic Drum Interactive Works..
Features
- This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration.
- Simulated piezoelectric ceramic vibration sensor is a reverse process that uses piezoelectric ceramics to generate vibrations for electrical signals. When the piezoelectric ceramic plate vibrates, an electrical signal is generated. When combined with the sensor expansion board v5.0, the analog port can sense weak vibration electrical signals and achieve interactive works related to vibration, such as electronic drum interactive works.
- Working Voltage: 3.3V or 5V. Working Current: 1mA. Interface Type: Analog Output.
- The S port is connected to the analog input pin of the controller. 5V and GND are respectively connected to the+5V and GND of the power supply.
- Piezoelectric ceramics not only have piezoelectric properties, but also have dielectric properties, elasticity, etc. They have been widely used in sonar imaging, acoustic sensors, acoustic transducer, ultrasonic motors, and other fields.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.35 x 1.18 x 0.91 Inches
See On Amazon Similar To DiGiYes 5Pcs 3.3V 5V Analog
#1
DiGiYes 15Pcs 3 Pins AMS1117-3.3 DC-DC oltage Regulator Buck Power Module 4.5V-7V to 3.3V Step Down Module LDO 800mA
Asin: B0CP5G5KSX
It Adopts Low Drop Out Regulator Technology (Ldo), Which Can Provide Stable Voltage Output, With Power Indicator Light, And Has Overcurrent Protection And Short Circuit Protection Functions..
Support Arduino Mega2560 Msp430 Development Board, 3.3V Low Power Consumption Mcu, Fpga / Cpld Pld Programmable Logic Systems, Arm7 Arm9 Arm11 Stm32, Etc..
3 Pins Ams1117-3.3 Voltage Regulator Mini Buck Power Supply Module, Can Be Applied To Electronic Devices Which Need 3.3V Power Supply, Such As Scm Project Design, Mcu Development And More..
Simple Double-Sided Board Design, With 3-Pin Single Row Pins For Input And Output, Convenient Connection. When The Input Voltage Is 1.2V Higher Than The Output Voltage, The Module Can Work Normally..
Features
- AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.5-7V input and 3.3V fixed voltage and 0.8A current output.
- Simple double-sided board design, with 3-pin single row pins for input and output, convenient connection. When the input voltage is 1.2V higher than the output voltage, the module can work normally.
- It adopts Low drop out regulator technology (LDO), which can provide stable voltage output, with power indicator light, and has overcurrent protection and short circuit protection functions.
- 3 pins AMS1117-3.3 voltage regulator mini buck power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more.
- Support Arduino MEGA2560 MSP430 development board, 3.3V low power consumption MCU, FPGA / CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.20 x 0.47 x 0.35 Inches
See On Amazon #2
DiGiYes 5Pcs MB102 Breadboard 3.3V 5V Power Supply Module DC 6.5-12V USB Fit for Arduino
Asin: B0C77L3SNY | Model: EMD_D0C | PartNumber: EMD_D0C
On Board Two Sets Of 3.3V, 5V Dc Output Pins, Convenient For External Connection..
Output Voltage: 3.3V / 5V (Switchable); Output Current: Less Than 700Ma.
Input Voltage: Dc 6.5 - 12V Or Usb Power Supply.
Up And Down Independent Control, Switching 0V / 3.3V / 5V..
Features
- Bread board power module, compatible with 5V and 3.3V, suitable for MB102 bread board.
- Up and down independent control, switching 0V / 3.3V / 5V.
- On board two sets of 3.3V, 5V DC output pins, convenient for external connection.
- Input Voltage: DC 6.5 - 12V or USB Power Supply
- Output Voltage: 3.3V / 5V (Switchable); Output Current: Less Than 700mA
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.39 x 1.38 x 0.79 Inches
Warranty: This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
See On Amazon #3
DiGiYes Module USB 2.0 to TTL 5Pin Module Serial Converter for UART STC 3.3V and 5V with Dupont Wire (Black)
Asin: B0BPSQ931Y
Usb Power, Give Rise Out Interface Including 3.3V (Less Than 40Ma), 5V, Gnd, Tx, Rx, Pin Level Is 3.3V, Positive Logic..
Smt Components Are Produced By Smt Process With Stable..
The On-Board Status Indicator, Transceiver Indicator, The Correct Installation Of The Driver Status Indicator Light Will Be Steady On, Transceiver Indicator In Communication Will Blink, The Higher The Baud Rate, The Lower The Brightness..
Support From 300Bps - 1Mbps Baud Rate..
Features
- The virtual serial port is generated after the driver is installed.
- Support from 300bps - 1Mbps baud rate.
- USB power, give rise out interface including 3.3V (Less than 40mA), 5V, GND, TX, RX, pin level is 3.3V, positive logic.
- The on-board status indicator, transceiver indicator, the correct installation of the driver status indicator light will be steady on, transceiver indicator in communication will blink, the higher the baud rate, the lower the brightness.
- SMT components are produced by SMT process with stable.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.27 x 1.88 x 0.55 Inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search