Shaft Coupler Connector L25 x D14 5mm to 8mm Bore Rigid Coupling Motor Shaft Joint Connector with Screw for 3D Printers 4PCS
Asin: B0CQKFZRR7
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Package Include: 4Pcs 5Mm To 8Mm Bore Rigid Coupling, 1Pcs M4 Hex Wrench, 16Pcs Fastening Screws..
Top Tight Type Rigid Coupling With Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Features
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- Package Include: 4pcs 5mm to 8mm bore rigid coupling, 1pcs M4 Hex Wrench, 16pcs fastening screws.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- See more on Amazon...
Brand: LULUQUEEN | Manufacturer: LULUQUEEN
Weight: 0.19 pounds
See On Amazon Similar To Shaft Coupler Connector L25 x
#1
Befenybay 2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling D20 L25 Connector Flexible Coupler for CNC Machine and Servo Stepped Motor 5x8mm
Asin: B07RMZCLZ3 | Model: BE011 | PartNumber: BE011 | Ean: 0824007172184 | UPC: 824007172184
Super Torque Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,And Excellent Response,Not Easy To Loosen.
The Shaft Couplers Are Mainly Used For Cnc Machines,Servo Motors, Spindle, Step Motor Etc.
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components.
Material: Aluminum Alloy, Polyurethane Type: Plum Shaped.
Features
- Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Diameter: 5mm to 8mm / 0.19inch to 0.31inch
- Material: Aluminum alloy, polyurethane Type: Plum shaped
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,and excellent response,not easy to loosen
- Flexibility of coupling shaft removes stress between the motor and driving components
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc
- See more on Amazon...
Brand: Befenybay | Manufacturer: befenybay
Weight: 0.07 Pounds
See On Amazon #2
Zeberoxyz 2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling Diameter20mm Length25mm 5x8mm Motor Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor 5x8mm
Asin: B08QV7SVH7 | Model: ZE032-4 | PartNumber: ZE032-4 | Ean: 0191170847349 | UPC: 191170847349
Super Torque Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,Durable,And Excellent Response,Not Easy To Loosen.
The Shaft Couplers Are Mainly Used For Cnc Machines,Servo Motors, Spindle, Step Motor Etc.
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components, The Coupling Can Be Disassembled And Used In Combination By Itself.
Shaft Coupler Material: Aluminum Alloy, Surface Oxidation Treatment; Type: Plum Shaped.
Features
- Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Bore Diameter: 5mm to 8mm / 0.19inch to 0.31inch
- Shaft Coupler Material: Aluminum alloy, Surface oxidation treatment; Type: Plum shaped
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen
- Flexibility of coupling shaft removes stress between the motor and driving components, The coupling can be disassembled and used in combination by itself
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc
- See more on Amazon...
Brand: Zeberoxyz | Manufacturer: Zeberoxyz
Weight: 0.07 Pounds
See On Amazon #3
Zeberoxyz 2PCS Shaft Coupling 5mm to 8mm Aluminum Alloy Joint 25mm Length 20mm Diameter Stepper Motor Connector Rigid Coupler for 3D Printer CNC Machine DIY model (5x8mm
Asin: B08ZJ854Z6 | Ean: 0791783537158 | UPC: 791783537158
Feature: Screw Type(Coiling Clamping),They Are Not Easy To Loosen,Main Color: Silver Tone.
Widely Used: Used For Transmit Motion And Widely Used In Diy Model Such As Small Cnc Machines, 3D Printer Z Shaft Coupling , Car Or Boat Etc. As Connector For Different Parts As Joint Connector.
Function: Provides Torque Transmision And Alignment, Cost Effective Coupling Design.
Material: Made Of Aluminium Alloy Material, Light, Anti-Oxidant, And Anti-Corrosive, Delicate Cnc Cut With Outstanding Appearance, High Precision Fine Workmanship,Long Service Life.
Features
- Shaft Coupling Size:L25mm x D20mm/0.98inch x 0.79inch( L*D), Bore Diameter: 5mm to 8mm / 0.19inch to 0.31inch, Shaft Range: 5mm to 8mm / 0.19 to 0.31 inch
- Material: Made of aluminium alloy material, light, anti-oxidant, and anti-corrosive, delicate CNC cut with outstanding appearance, high precision fine workmanship,long service life
- Feature: Screw Type(Coiling Clamping),They are not easy to loosen,Main Color: Silver tone
- Function: Provides torque transmision and alignment, Cost effective coupling design
- Widely Used: Used for transmit motion and widely used in DIY model such as small CNC machines, 3d printer Z shaft coupling , car or boat etc. as connector for different parts as joint connector
- See more on Amazon...
Brand: Zeberoxyz | Manufacturer: Zeberoxyz
Dimensions: 0.71 x 9.84 x 0.00 Inches | Weight: 0.07 pounds
See On Amazon #4
YOTINO 5PCS Flexible Couplings 5mm to 8mm NEMA 17 Shaft Coupler for Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 3D Printer Or CNC Machine(Bonus 1pcs M3 Allen Wrench)
Asin: B07DC2CV6T | Model: RepRap 3D Printers | PartNumber: RepRap 3D Printers | Ean: 0750440595030 | UPC: 750440595030
[Dimensions] -- Coupler Diameter 19Mm X Height 24Mm.
[Applications] -- Compatible With Nema 17 Stepper Motors,Useful In Creality Cr-10S ,Reprap 3D Printers And Small Cnc Machines.
[Usage] -- Flexible Coupling Can Eliminate The Stress Between The Motor And Drive Parts.
[Content] -- 5Pcs Shaft Coupler Diameter 5Mm To 8Mm + 1Pcs M3 Allen Wrench.
Features
- [MATERIAL] -- Flexible Couplings made of premium aluminum alloy material, exquisite workmanship, bright appearance, good toughness
- [CONTENT] -- 5Pcs shaft coupler diameter 5mm to 8mm + 1Pcs M3 Allen wrench
- [DIMENSIONS] -- Coupler diameter 19mm x height 24mm
- [USAGE] -- Flexible coupling can eliminate the stress between the motor and drive parts
- [APPLICATIONS] -- Compatible with NEMA 17 stepper motors,useful in Creality CR-10S ,RepRap 3D Printers and small CNC machines
- See more on Amazon...
Brand: YOTINO | Manufacturer: YOTINO
Dimensions: 0.79 x 2.76 x 1.97 Inches
See On Amazon #5
Befenybay 2PCS 5mm to 8mm Flexible Shaft Coupling 25mm Length 20mm Diameter for Stepper Motor Coupler Aluminum Alloy for 3D Printer CNC Machine (5x8mm)
Asin: B081SK9R64 | Ean: 0303277262776 | UPC: 303277262776
Provides Torque Transmision And Alignment, Cost Effective Coupling Design.
Used For Reprap 3D Printers And Small Cnc Machines.
Not Easy To Loosen.
Material: Aluminum Alloy With 25Mm X 20Mm(L X D)/ 0.98X0.79Inch( L*D).
Features
- Shaft Coupling Range: 5mm to 8mm / 0.19 to 0.31 inch
- Material: Aluminum alloy with 25mm x 20mm(L x D)/ 0.98x0.79inch( L*D)
- Provides torque transmision and alignment, Cost effective coupling design
- Not easy to loosen
- Used for RepRap 3D Printers and small CNC machines
- See more on Amazon...
Brand: Befenybay | Manufacturer: befenybay
See On Amazon #6
Shaft Coupler Connector L25 x D14 6mm to 6mm Bore Rigid Coupling Motor Shaft Joint Connector with Screw for 3D Printers 4PCS
Asin: B0CNQ4J8M2
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Package Include: 4Pcs 6Mm To 6Mm Bore Rigid Coupling, 1Pcs M4 Hex Wrench, 16Pcs Fastening Screws..
Top Tight Type Rigid Coupling With Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Features
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- Package Include: 4pcs 6mm to 6mm bore rigid coupling, 1pcs M4 Hex Wrench, 16pcs fastening screws.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- See more on Amazon...
Brand: LULUQUEEN | Manufacturer: LULUQUEEN
See On Amazon #7
2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling 30mm Length 25mm Diameter Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor
Asin: B08K2SY879 | Model: FSC-D25L30-5-8mm | PartNumber: FSC-D25L30-5-8mm | Ean: 0784121506886 | UPC: 784121506886
Product Features: Shaft Coupling Has High Torque, High Rigidity, Good Vibration Resistance, Flexible Response And Durability In Removes Stress Between The Motor And Driving Components..
Package Include:2Pcs 5Mm To 8Mm D25 L30 Connector Flexible Coupler,1Pcs M4 Hex Wrench..
Widely Used:The Shaft Couplers Are Widely Used For Servo Motors, Spindle, Step Motor Etc..
Type: Plum Shaped ;Size:L30mm X D25mm/1.18Inch X 0.98Inch( L*D) Diameter: 5Mm To 8Mm / 0.19Inch To 0.31Inch.
Features
- Material Made of aluminum material with corrosion resistance and long life.
- Type: Plum shaped ;Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Diameter: 5mm to 8mm / 0.19inch to 0.31inch
- Product features: shaft coupling has high torque, high rigidity, good vibration resistance, flexible response and durability in removes stress between the motor and driving components.
- Widely Used The shaft couplers are widely used for servo motors, spindle, step motor etc.
- Package Include:2pcs 5mm to 8mm D25 L30 Connector Flexible Coupler,1pcs M4 hex wrench.
- See more on Amazon...
Brand: VICHSAMWY | Manufacturer: VI-CHAN
See On Amazon #8
uxcell 12mm to 8mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L30xD25 Silver
Asin: B09BZC6L4S
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 1 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 12mm to 8mm ; Total Length: 30mm /1.2 inch; Outside Diameter : 25mm/ 0.98 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 1 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 8mm to 8mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L30xD25 Silver
Asin: B07G6Q1GHN | Model: a18061200ux0164 | PartNumber: a18061200ux0164
Main Color: Silver Tone; Total Size: 30 X 25Mm / 1.18 Inch X 0.98 Inch (L*D).
Connection Diameter: 8Mm To 8Mm/0.31 Inch To 0.31 Inch.
Feature: Set Screws.
Net Weight: 36G; Package Content: 1 X Shaft Coupling.
Features
- Country of Manufacture: CHINA; Material: Aluminum Alloy
- Net Weight: 36g; Package Content: 1 x Shaft coupling
- Main Color: Silver Tone; Total Size: 30 x 25mm / 1.18 inch x 0.98 inch (L*D)
- Feature: Set screws
- Connection Diameter: 8mm to 8mm/0.31 inch to 0.31 inch
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 Inches
See On Amazon #10
Xnrtop 6mm to 6mm Shaft Coupling 25mm Length 18mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder (Pack of 2
Asin: B07YDG25JX | Model: 6x6MM(D18*L25) | PartNumber: 6x6MM(D18*L25) | Ean: 0745672480964 | UPC: 745672480964
Feature: Set Screws (Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 25X18mm/ 0.98X0.71 Inch( L*D).
Features
- Shaft Usage: 6mm to 6mm / 0.24 to 0.24 inch
- Material: Aluminum alloy; Size: 25x18mm/ 0.98x0.71 inch( L*D)
- Feature: Set screws (Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: Xnrtop | Manufacturer: Xnrtop
Dimensions: 2.00 x 2.00 x 1.00 Inches | Weight: 0.04 pounds
See On Amazon #11
Sinoblu D25 L30 6mm to 8mm Shaft Coupler Aluminum Flexible Shaft Coupling Coupler for 3D Printer CNC Machine and Servo Stepper Motor
Asin: B096DD33ZJ | Model: ML25300608 | PartNumber: ML25300608
Super Torque: Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,Durable,And Excellent Response,Not Easy To Loosen.
Wide Range Of Usage: Flexible Spider Couplings Is Suitable To Offset Axial, Radial And Angular Displacements And Dampen Vibrations And Torque Shocks For 3D Printer Diy Encoder Cnc Router Machine Servo Stepped Motor And Engraving Drilling Milling Machine.
Vibration-Damping: Flexible Spider Couplings Offset Angular, Radial And Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock And Torsional Vibrations In The Drive Train.
Material: Using Aviation Aluminum With Corrosion Resistance High Hardness, High Precision, Anodized Surface Treatment, Strong And Durable. Spider Material (Elastomer) Uses T-Pur, Longer Service Life.
Features
- Size Diameter 25mm Length 30mm/Diameter 1inch Length 1.2inch. Bore 6-8mm/0.24-0.31inch. Type: Plum shaped
- Material: Using Aviation Aluminum with corrosion resistance High Hardness, High Precision, Anodized Surface Treatment, Strong and Durable. Spider Material (Elastomer) Uses T-PUR, Longer Service Life
- Super Torque: Can Absorb Vibration, Appropriate a Large Torque Transmission.High Hardness,Durable,and Excellent Response,Not Easy to Loosen
- Vibration-damping: Flexible Spider Couplings Offset Angular, Radial and Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock and Torsional Vibrations in The Drive Train
- Wide Range of Usage: Flexible Spider Couplings is Suitable to Offset Axial, Radial and Angular Displacements and Dampen Vibrations and Torque Shocks for 3D Printer DIY Encoder CNC Router Machine Servo Stepped Motor and Engraving Drilling Milling Machine
- See more on Amazon...
Brand: Sinoblu | Manufacturer: Sinoblu
See On Amazon #12
2-Pack 5mm to 8mm Flexible Shaft Coupling 25mm Length 20mm Diameter Stepper Motor Lead Screw Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder (OD20 x L25mm 5x8mm)
Asin: B08FZHTSDY | Model: lead screw coupler | PartNumber: lead screw coupler | Ean: 0791548326683 | UPC: 791548326683
Size: 25X20mm/ 0.98X0.79Inch( L*Od) ; Material: Aluminum Alloy.
Package: 2Pieces Lead Screw Couplers.
These Coupler Is Using 2 Screws And 2Pcs Set Screw To Fix, More Stable And Durable.
It Also Can Be Used With Other 3D Printers And Cnc Machines Which Are Using 5Mm Shaft Motor To 8Mm Lead Screw..
Features
- Suitable for 3D printer and other machine which uses shaft 5mm to 8mm / 0.19 to 0.31 inch
- it also can be used with other 3D printers and CNC machines which are using 5mm shaft motor to 8mm lead screw.
- Size: 25x20mm/ 0.98x0.79inch( L*OD) ; Material: aluminum alloy
- These coupler is using 2 screws and 2pcs set screw to fix, more stable and durable
- Package: 2pieces lead screw couplers
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #13
RANIT 5Pcs 10mm to 10mm Shaft Coupling 25mm Length 19mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder
Asin: B07MHP5JWL | Model: L25 x D19 | PartNumber: L25 x D19 | Ean: 6446174328702
3.Main Color: Silver Tone; Total Size: 25 X 19Mm / 0.98 Inch X 0.75 Inch (L*D).
5.Connection Diameter: 10Mm To 10Mm/0.39 Inch To 0.39 Inch.
4.Feature: Set Screws.
2.Net Weight: 90G; Package Content: 5 X Shaft Coupling.
Features
- 1.Country of Manufacture: CHINA; Material: Aluminum alloy
- 2.Net Weight: 90g; Package Content: 5 x Shaft coupling
- 3.Main Color: Silver Tone; Total Size: 25 x 19mm / 0.98 inch x 0.75 inch (L*D)
- 4.Feature: Set screws
- 5.Connection Diameter: 10mm to 10mm/0.39 inch to 0.39 inch
- See more on Amazon...
Brand: WEIJ | Manufacturer: WEIJ Ltd
See On Amazon #14
Befenybay Shaft Coupling 25mm Length 20mm Diameter Coupler Aluminum Alloy 5mm to 8mm for 3D Printer CNC Machine(Pack of 2)
Asin: B07Q5Q3DCB | Ean: 0303277334817 | UPC: 303277334817
Provides Torque Transmision And Alignment, Cost Effective Coupling Design.
Commonly Used For Shafts That Transmit Motion And Widely Used In Diy Model Such As 3D Printer , Car Or Boat Etc. As Connector For Different Parts As Joint Connector.
They Are Not Easy To Loosen.
High Quality: Made Of Aluminium Alloy Material, Light, Anti-Oxidant, And Anti-Corrosive, Delicate Cnc Cut With Outstanding Appearance, High Precision Fine Workmanship, Long Service Life.
Features
- Shaft Coupling Range: 5mm to 8mm / 0.19 to 0.31 inch
- High Quality: Made of aluminium alloy material, light, anti-oxidant, and anti-corrosive, delicate CNC cut with outstanding appearance, high precision fine workmanship, long service life
- Provides torque transmision and alignment, Cost effective coupling design
- They are not easy to loosen
- Commonly used for shafts that transmit motion and widely used in DIY model such as 3d printer , car or boat etc. as connector for different parts as joint connector
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
Dimensions: 0.79 x 0.98 x 0.79 inches | Weight: 0.10 Pounds
See On Amazon #15
uxcell Aluminum Plum Shaft Coupling 6mm to 8mm Bore L25xD20 Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor Pack of 2
Asin: B0CTH6DN6J
The Jaw Coupling Has Three Parts: Two Metallic Hubs And An Elastomer Insert. The Two Fixed Ends Are Made Of Hard Aluminum Alloy And The Middle Is Made Of Polyurethane Elastomer. You Need To Fit The Three Parts Together With The Jaw Lock..
Wear-Resistant, High Hardness And Excellent Response. Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Due To The Limitation In The Shaft Misalignment, Please Check Your Shaft Misalignment. Too Much Angular Or Parallel Misalignment Will Result In Bearing Loads That May Lead To Premature System Wear Or Failure..
Package Content:2 X Flexible Shaft Couplers;Color: Silver, Red;Material: Aluminum;Connection Diameter: 6 To 8Mm/0.24 To 0.31Inch;Total Length: 25Mm/0.98Inch;Outside Diameter : 20Mm/0.79Inch;Attachment:Inner Hex Wrench..
Features
- General-purpose power transmission coupling, also used in motion control applications and rotational power transmissions. Widely used in servo stepped motor, 3D printer, CNC, and encoder motor.
- Package Content 2 x Flexible Shaft Couplers;Color: Silver, Red;Material: Aluminum;Connection Diameter: 6 to 8mm/0.24 to 0.31inch;Total Length: 25mm/0.98inch;Outside Diameter : 20mm/0.79inch;Attachment:Inner Hex Wrench.
- The jaw coupling has three parts: two metallic hubs and an elastomer insert. The two fixed ends are made of hard aluminum alloy and the middle is made of polyurethane elastomer. You need to fit the three parts together with the jaw lock.
- Due to the limitation in the shaft misalignment, please check your shaft misalignment. Too much angular or parallel misalignment will result in bearing loads that may lead to premature system wear or failure.
- Wear-resistant, high hardness and excellent response. Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
Xnrtop 5mm to 6mm Shaft Coupling 25mm Length 18mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder(Pack of 2
Asin: B07YDJK4BM | Model: 5x6MM(D18*L25) | PartNumber: 5x6MM(D18*L25) | Ean: 0745672480988 | UPC: 745672480988
Feature: Set Screws (Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 25X18mm/ 0.98X0.71 Inch( L*D).
Features
- Shaft Usage: 5mm to 6mm / 0.19 to 0.24 inch
- Material: Aluminum alloy; Size: 25x18mm/ 0.98x0.71 inch( L*D)
- Feature: Set screws (Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: Xnrtop | Manufacturer: Xnrtop
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #17
Upgrade D20*L25 Flexible Shaft Coupling 6.35mm to 10mm Aluminium Plum Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor
Asin: B0C176Z55K | Model: D20 L25 | PartNumber: D20 L25
During Transmission, It Can Realize Zero Backlash Torque Transmission Torque Under Low Torque State.
Excellent Elastic Effect To Absorb Vibration, Eccentricity And Deflection.
Plum Blossom Elastomer Can Resist Oil And Electrical Insulation, Operating Temperature: -20℃~80℃.
The Elastic Spacer Is Made Of Polyurethane, And The Torque Exceeds The Traditional Claw Coupling By More Than 2 Times.
Features
- Size:D20mm*L25mm , Bore:6.35mm to 10mm
- The elastic spacer is made of polyurethane, and the torque exceeds the traditional claw coupling by more than 2 times
- During transmission, it can realize zero backlash torque transmission torque under low torque state
- Plum blossom elastomer can resist oil and electrical insulation, operating temperature: -20 ~80
- Excellent elastic effect to absorb vibration, eccentricity and deflection
- See more on Amazon...
Brand: AOWEITAL | Manufacturer: Kuakee
See On Amazon #18
Xnrtop 8mm to 8mm Shaft Coupling 25mm Length 18mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder(Pack of 2
Asin: B07YD45PY8 | Model: 8x8MM(D18*L25) | PartNumber: 8x8MM(D18*L25) | Ean: 0745672480902 | UPC: 745672480902
Feature: Set Screws (Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 25X18mm/ 0.98X0.71 Inch( L*D).
Features
- Shaft Usage: 8mm to 8mm / 0.31 to 0.31 inch
- Material: Aluminum alloy; Size: 25x18mm/ 0.98x0.71 inch( L*D)
- Feature: Set screws (Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: Xnrtop | Manufacturer: Xnrtop
Dimensions: 2.00 x 2.00 x 1.00 Inches | Weight: 0.04 pounds
See On Amazon #19
Xnrtop 5mm to 6.35mm Shaft Coupling 25mm Length 18mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder(Pack of 2
Asin: B07YDGZJCZ | Model: 5x6.35MM(D18*L25) | PartNumber: 5x6.35MM(D18*L25) | Ean: 0745672480971 | UPC: 745672480971
Feature: Set Screws (Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 25X18mm/ 0.98X0.71 Inch( L*D).
Features
- Shaft Usage: 5mm to 6.35mm / 0.19 to 0.25 inch
- Material: Aluminum alloy; Size: 25x18mm/ 0.98x0.71 inch( L*D)
- Feature: Set screws (Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: Xnrtop | Manufacturer: Xnrtop
Dimensions: 2.00 x 2.00 x 1.00 Inches | Weight: 0.04 pounds
See On Amazon #20
Eewolf 2PCS Coupler Flexible Couplings 5mm to 8mm NEMA 17 Shaft for Anycubi Kobra/Kobra Go/Kobra Neo/Kobra Plus/Vyper/Ender 3 s1 Pro/Ender 3 v2 Neo 3D Printer or CNC Machine
Asin: B07BBP4H8C | Model: LZQ01 | PartNumber: LZQ01 | Ean: 0669614275145 | UPC: 669614275145
Shaft Coupler Size: L25mm X D20mm / 0.98" X 0.79" (L*D) Bore Diameter: 5Mm To 8Mm / 0.19" To 0.31", Shaft Range: 5Mm To 8Mm / 0.19" To 0.31".
Material: Aluminum Alloy.
Package Include: 2Pcs 3D Printer Couplers.
The Rigid Couplings Of The Housing Are Compatible With Kobra,Kobra Go,Kobra Neo,Kobra Plus,Vyper,Ender 3 V2, Ender 3 Pro, Ender 3 V2 Neo, Cr10, Cr10s, Cr10s Pro, Anet A8 3D Printers And Small Cnc Machines.
Features
- Compatible with NEMA 17 stepper motors (for 5mm to 8mm shaft diameter)
- The rigid couplings of the housing are compatible with Kobra,Kobra go,Kobra neo,Kobra Plus,Vyper,Ender 3 V2, Ender 3 PRO, Ender 3 V2 NEO, CR10, CR10S, CR10S PRO, Anet A8 3D Printers and small CNC machines
- Shaft Coupler Size: L25mm x D20mm / 0.98 x 0.79 (L*D) Bore Diameter: 5mm to 8mm / 0.19 to 0.31, Shaft Range: 5mm to 8mm / 0.19 to 0.31
- Package include: 2pcs 3d printer couplers
- Material: Aluminum alloy
- See more on Amazon...
Brand: Eewolf | Manufacturer: Eewolf
See On Amazon
Looking For Something Else?
Search