BaYte Household Chimney Induced Fan 100W Fireplace Exhaust Fan Chimney Ventilation Fans Electric Chimney Fan
Asin: B0CQXK1LB5 | Ean: 1091927620739
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✔ The Product's Operating Voltage Is 190-230V ( 110V-120V Voltage, We Will Be Equipped With A Voltage Converter), For Flue Diameter 21.5-22.5 Cm, And The Chimney Induced Draft Fan Is Used By Leaving Two Wire Ends To Connect To The Power Source..
✔ Paint Body, Corrosion-Resistant, Wind And Sun, Not Afraid Of Rust. These Fans Are Designed Specifically For Applications Where Efficient Operation, Low Energy Consumption, Compact Design Are Of Utmost Importance..
✔ The Temperature At The Chimney Outlet Cannot Exceed 60 Degrees, And The Distance From The Fire Source To The Chimney Outlet Is Required To Be More Than 6 Meters. Otherwise, The Induced Draft Fan Will Be Burned..
✔ Chimney Fans Are The Ideal Choice In Chimney Exhaust Fans For Curing Drafting Issues, And The Preferred Chimney Fans Of Professional..
Features
- All cast iron/easy to install/efficient and durable/dustproof and rainproof/energy saving/thick shell.
- Chimney fans are the ideal choice in chimney exhaust fans for curing drafting issues, and the preferred chimney fans of professional.
- The product's operating voltage is 190-230V ( 110V-120V voltage, we will be equipped with a voltage converter), for flue diameter 21.5-22.5 cm, and the chimney induced draft fan is used by leaving two wire ends to connect to the power source.
- The temperature at the chimney outlet cannot exceed 60 degrees, and the distance from the fire source to the chimney outlet is required to be more than 6 meters. Otherwise, the induced draft fan will be burned.
- Paint body, corrosion-resistant, wind and sun, not afraid of rust. These fans are designed specifically for applications where efficient operation, low energy consumption, compact design are of utmost importance.
- See more on Amazon...
Brand: BaYte | Manufacturer: BaYte
See On Amazon Similar To BaYte Household Chimney Induced Fan
#1
VODA 4-Blade Heat Powered Stove Fan for Wood/Log Burner/Fireplace increases 80% more warm air than 2 blade fan
Asin: B01CD2AIV8 | Model: VDSF624B | PartNumber: VDSF624B | Ean: 0758910034898, 0758910035727 | UPC: 758910035727, 758910034898
Less Consumption, More Efficiency..
Silent Operation.
Innovative And Durable Design..
Efficiently Circulates Warm Air Throughout The Room..
Features
- Heat powered - no batteries or electricity required.
- Efficiently circulates warm air throughout the room.
- Less consumption, more efficiency.
- Innovative and durable design.
- Silent operation
- See more on Amazon...
Brand: VODA | Manufacturer: L-Best stove accessary O
Dimensions: 8.27 x 4.72 x 8.27 inches | Weight: 2.25 pounds
See On Amazon #2
Tomersun 3 Blades Heat Powered Stove Fan for Wood/Log Burner/Fireplace
Asin: B075F36YNK | Model: XYD-PT95PB | PartNumber: XYD-PT95PB | Ean: 1909072808004
Longer Lifetime--There Is A Bi-Metallic Safety Device At The Base Of The Stove Fan. If The Surface Temperature Rises Around 300℃, The Safety Device Gently Elevates The Front Of The Fan To Protect The Teg And Motor..
Less Consumption, More Efficiency--The Stove Fan Will Help Reduce The Fuel Consumption And Make The Room Warmer Quickly..
Whisper-Quiet--The Only Moving Part Of This Heat Powered Fan Is The Blade Assembled. You Don't Even Know The Stove Fan Is There, But You Will Feel The Warmth!.
No Batteries Or Electricity Required--The Wood Burner Fan Uses Heat From The Stove Surface To Spin, Adjusting Its Speed Automatically With The Stove Surface Temperature..
Features
- Compact Size--8.7 x 6.7 x 3.6 inches, the material of the stove fan is aluminum.
- No Batteries or Electricity required--The wood burner fan uses heat from the stove surface to spin, adjusting its speed automatically with the stove surface temperature.
- Longer lifetime--There is a Bi-metallic safety device at the base of the stove fan. If the surface temperature rises around 300 , the safety device gently elevates the front of the fan to protect the TEG and motor.
- Whisper-quiet--The only moving part of this heat powered fan is the blade assembled. You don't even know the stove fan is there, but you will FEEL the WARMTH!
- Less Consumption, More Efficiency--The stove fan will help reduce the fuel consumption and make the room warmer quickly.
- See more on Amazon...
Brand: Tomersun
Dimensions: 0.69 x 0.38 x 0.59 inches | Weight: 1.94 pounds
See On Amazon #3
VODA Wood Stove Fan Small New Designed 4 Blades Heat Powered Fireplace Fans Eco Fan for Home Wood/Log Burner/Fireplace(Black)
Asin: B01GJAUU4U | Model: VDSF684B | PartNumber: VDSF684B | Ean: 0758910035666, 0758910035338 | UPC: 758910035338, 758910035666
【Operating Temperature】The Working Temperature Of This Wood Stove Fan Is 85-350°C. It Starts Spinning When The Temperature Gets Around 55°C, And Works Most Efficiently When It Gets Around 250-300°C. But Please Avoid Using The Fan At High Temperature Continuously For A Long Time. Kindly Note That Its Working Efficiency Will Be Various As Per Your Stovetop Temperature, Room Space Etc..
【Overheating Protection】The Stove Fan Comes With A Bi-Metallic Safety Device At The Bottom.When The Surface Temperature Rises Around 250-300°C, It Will Gently Lift The Front Of The Fan To Protect The Teg And Motor. The Fan Will Automatically Recover Normally As The Surface Temperature Decreases..
【Whisper And Quiet】The Noise Level Of The Eco Fan Is Less Than 25Db, The Only Moving Part Is The Blades,Which Makes The Wood Stove Fan Almost Totally Silent Even At Top Speed.You Even Do Not Know The Stove Fan Is There, But You Will Still Feel A Breeze, But Not Wind From Your Fan..
【Easy To Use】No Assembly Required, You Only Need To Place This Mini Stove Fan On A Smooth Flat Surface Of Your Stovetop, The Stove Fan Will Automatically Rotate With The Temperature Getting Higher. The Hotter The Stovetop Is, The Faster The Stove Fan Spins And The More Warm Air The Eco Fan Circulates..
Features
- Heat Powered This small wood stove fan is a perfect addition to every home that has a wood stove. No batteries or electricity required, but simply the heat from your stovetop, this eco friendly fan allows you to get the maximum heat from your wood burner stoves.
- Easy to Use No assembly required, you only need to place this mini stove fan on a smooth flat surface of your stovetop, the stove fan will automatically rotate with the temperature getting higher. The hotter the stovetop is, the faster the stove fan spins and the more warm air the eco fan circulates.
- Operating temperature The working temperature of this wood stove fan is 85-350 C. It starts spinning when the temperature gets around 55 C, and works most efficiently when it gets around 250-300 C. But please avoid using the fan at high temperature continuously for a long time. Kindly note that its working efficiency will be various as per your stovetop temperature, room space etc.
- Whisper and Quiet The noise level of the eco fan is less than 25db, the only moving part is the blades,which makes the wood stove fan almost totally silent even at top speed.You even do not know the stove fan is there, but you will still feel a breeze, but not wind from your fan.
- Overheating Protection The stove fan comes with a bi-metallic safety device at the bottom.When the surface temperature rises around 250-300 C, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases.
- See more on Amazon...
Brand: VODA | Manufacturer: L-Best stove accessary O
Dimensions: 7.56 x 4.14 x 6.30 inches | Weight: 1.15 pounds
See On Amazon #4
Xmasneed Wood Stove Fan, Fireplace Fan for Wood Burning Stove, Heat Powered fan, Wood Stove Accessories, Quiet Operation Circulating Warm Air, (Include Magnetic Thermometer) (5-Blade)
Asin: B09B21LPH2 | Model: Xmasneed-5 Blade | PartNumber: Xmasneed-5 Blade | Ean: 0727536897514 | UPC: 727536897514
【Quiet Operation】 This Stove Fan's Noise Level Is Less Than 25 Db, Which Gives You A Quiet Atmosphere. The Stove Fan Is Designed To Be Used With Coal, Pellet, Or Wood-Burning Stoves.
【Quality Warranty】If Any Issues, Please Reach Out To Us Via Amazon Or Service Mail. The Package Comes With A Stove Fan And A Free Stove Accessory -Thermometer. Please Put Fan On The Side Of The Chimney, (Leave A Space Of 15Cm Behind The Fan) So That The Fan Can Blow Hot Air Into The Room.
【Heated Powered Stove Fan Non-Electirc】Our Thermal Fan For Wood Stove Is An Environment-Friendly Eco Fan. The Thermoelectric Module Acts As A Small Generator To Power The Fan's Motor. No Batteries Or Power Required! Improved Warm Air Circulation Results In Greater Comfort And Reduces Wood Consumption From Your Stove.
Features
- Upgrade 5 Blades WoodStove fan The Cocoon fan for wood stove is equipped with 5 Blades, has Faster Speed and Larger Air Volume than 4 Blades, The heat active stove fan is designed to circulate the warm air created by a wood/coal or pellet-burning. Efficiently circulates warm air throughout the room
- Heated Powered Stove Fan Non-electirc Our Thermal fan for wood stove is an Environment-friendly Eco fan. The thermoelectric module acts as a small generator to power the fan's motor. No batteries or power required! Improved warm air circulation results in greater comfort and reduces wood consumption from your stove
- Quiet Operation This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves
- Quality Warranty If any issues, please reach out to us via amazon or service Mail. The Package comes with a stove fan and a free Stove accessory -thermometer. please put fan on the side of the chimney, (leave a space of 15cm behind the fan) so that the fan can blow hot air into the room
- See more on Amazon...
Brand: Xmasneed
Dimensions: 7.60 x 3.90 x 2.80 inches | Weight: 1.41 pounds
See On Amazon #5
Hongso Speed Variable S31105 Blower Fan 110V ~ 120V for GHP Group, Monessen/Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplace
Asin: B00PA29JVY | Model: S31105 | PartNumber: S31105 | Ean: 0713665134415, 0701142416291 | UPC: 713665134415, 701142416291
Fits In Ghp Group, Monessen/Majestic (Mhsc Brands), Majestic Dutchwest Windsor, Cfm Us Century Plate Steel Freestanding Wood Stove Fireplace.
▶︎Cfm: S244e, Fw247001, S274e, Fw27007, Fw300007, Cjw1000l02, Cjw2000l02; ▶︎Ghp: Hws-224172Mh-B , Hws-224172Mh-Bca , Hws-227202 , Hws-230292 , Lws-127201-B , Lws-127201-Bca, Lws-130291-B , Lws-130291-Bca.
Fits The Models Including (Not Completed): Mhsc Windsor Series Plate Stoves: Wr1000l02, Wr1500l02, Wr2000l02, Wr247001, Wr244, Wr270007, Wr300007..
Make Your Wood Burning Stove Even More Efficient With This Blower. When You Add A Blower To Your Wood Burning Steel Stove, Heated Air From The Stove Will Be Circulated Better Throughout Your Room. This Blower Will Allow You To Heat A Bigger Space While Using Less Fuel, Which Will Save You Money. And A More Efficient Wood Burning Stove Means That You Will Spend Less Time Going Outside In The Cold For More Firewood..
Features
- Total Blower Length with guard: 9.5 in. Height: 5.25 in. Depth 3.75 in. Blower size is 9" long and 5 1/4" tall. There are 4 holes to mount. They are 8" apart left to right, and 4 3/4" apart top to bottom. This optional variable speed blower can be mounted to the back of the stove using predrilled holes to improve heat circulation. Manual variable speed switch. 110V to 120V with 6' cord. 2800 RPMS. This blower set includes: 4 Mounting Hardware Screws and 1 Heat Gasket.
- Make your wood burning stove even more efficient with this blower. When you add a blower to your wood burning steel stove, heated air from the stove will be circulated better throughout your room. This blower will allow you to heat a bigger space while using less fuel, which will save you money. And a more efficient wood burning stove means that you will spend less time going outside in the cold for more firewood.
- Fits in GHP Group, Monessen/Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplace
- Fits the models including (not completed): MHSC Windsor Series plate stoves: WR1000L02, WR1500L02, WR2000L02, WR247001, WR244, WR270007, WR300007.
- CFM: S244E, FW247001, S274E, FW27007, FW300007, CJW1000L02, CJW2000L02; GHP: HWS-224172MH-B , HWS-224172MH-BCA , HWS-227202 , HWS-230292 , LWS-127201-B , LWS-127201-BCA, LWS-130291-B , LWS-130291-BCA
- See more on Amazon...
Brand: Hongso | Manufacturer: Hongso
Dimensions: 3.75 x 5.25 x 9.50 inches | Weight: 4.00 pounds
See On Amazon #6
Wood Stove Fan, Pipe Fireplace Fan with Magnetic Thermometer, 6 Blades Stove Fan on Chimney, Silent Motors, Push Horizontal Air Flow, Heat Powered Wood Stove Fan for Wood Burning Stove/Gas/Pellet/Log
Asin: B0B8RX282C | Model: BG316 | PartNumber: BG316
【Silent Operation】：Noise Level<25Db.Includes 1 * Thermal Fan; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual..
【Warranty】: Easy To Install. Stove Fans Non Electric Is Guarranteed For 1 Year Or Provide Replacement. The After-Sales Team Will Provide Solutions Within 24 Hours..
【Stove Fan Details】: Speed: 1400Rpm. Weight: 2.2Lb. Work Temp: 106°F-662°F.
【Durability】-The Wood Stove Fan Base And Blade Are Made From Anodized Aluminum Which Is Rust-Proof, Wear-Resisting, With Good Thermal Conductivity..
【Pipe Fireplace Fans】: This New Design Heat Activated Fan Is Suitable For The Uneven Surface Of Fireplace, It Also Can Be Fixed On The Chimney Pipe Of Wood/Log Burner/Fireplace. Pipe Size Is Between 6.1-6.88In..
Features
- Efficient Heat Distribution : Wood Stove fan non electric, Heat powered by wood burning stove, thermal fins convert the absorbed thermal energy into kinetic energy, and when the temperature reaches 212 F, woodstove fans kicks in, diverting the warm air horizontally all around your house. CFM: 160-220.
- Pipe Fireplace Fans : This new design heat activated fan is suitable for the uneven surface of fireplace, it also can be fixed on the chimney pipe of wood/Log burner/fireplace. Pipe size is between 6.1-6.88in.
- Silent Operation Noise level<25db.Includes 1 * Thermal Fan; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual.
- DURABILITY -The wood stove fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity.
- WARRANTY : Easy to install. Stove fans non electric is guarranteed for 1 year or provide replacement. The after-sales team will provide solutions within 24 hours.
- STOVE FAN DETAILS : Speed: 1400rpm. Weight: 2.2lb. Work temp: 106 F-662 F
- See more on Amazon...
Brand: Xmasneed
Dimensions: 6.49 x 5.51 x 6.49 Inches
See On Amazon #7
CONBOLA Wood Stove Fan Heat Powered,Silent Operation Fireplace Fan for Wood/Log Burner/Fireplace,Made of Quality Aluminum Material Increases 80% More Warm Air Efficient Heat Distribution.(Black)
Asin: B0BRKF8FK5 | Model: 301 | PartNumber: 301 | Ean: 0764742717458 | UPC: 764742717458
Silence Operation - The Noise Produced By The Fan During Operation Does Not Greater Than 20 Db ,Which Is 40% Lower Than That Produced By Similar Products.Also,When The Fan Is Heated To The Initial Temperature 122°F/50℃,The Fan Will Start Automatically.You Will Enjoy The Warm Air In A Quiet And Comfort Environment..
Exquisite Workmanship - This Fan Is Not Only Improved In Materials, But Also The Edges And Details Of The Stove Fan Are Carefully Hemmed, Without Any Sticky Feeling, More Safer To Use. Integrated Spray Paint, The Body Is Evenly Colored And Shiny, High-Grade And Texture.Good Choice For Personal Use And Gift..
Energy Saving - Because Of The Upgrade Of The Overall Material Of The Product,The Fan For Wood Stove Powered By Heat Uses High-Quality Proofreading Blades, Which Can Reduce Noise More And Increase The Heat Output Of The Basic Fan By Another 20% At The Same Time .It Is More Energy Efficient Than Other Stove Fan And Increase The Heating Efficiency Of The Stove..
High Quality Motor With Strong Frame - Using High-Grade Motor, The Wind Is Stronger And The Use Last Longer.What's More,The Whole Body Is Made Of High Quality Aluminum Material To Create A Low Center Of Gravity Design To Make The Fan Is More Stable Than Other Shapes When It Is Running..
Features
- HEAT POWERED STOVE FAN - The fireplace fan DO NOT USE any batteries or electricity to run,it generates its own power by the heat from the stove surface,widely used in wood-burning stoves,pellet stoves ,gas stoves,etc.
- HIGH QUALITY MOTOR WITH STRONG FRAME - Using high-grade motor, the wind is STRONGER and the use LAST LONGER.What's more,the whole body is made of HIGH QUALITY ALUMINUM MATERIAL to create a low center of gravity design to make the fan is more STABLE than other shapes when it is running.
- SILENCE OPERATION - The noise produced by the fan during operation DOES NOT greater than 20 dB ,which is 40% LOWER than that produced by similar products.Also,when the fan is heated to the initial temperature 122 F/50 ,the fan will START AUTOMATICALLY.You will enjoy the warm air in a quiet and comfort environment.
- ENERGY SAVING - Because of the upgrade of the overall material of the product,the fan for wood stove powered by heat uses high-quality PROOFREADING BLADES, which can REDUCE NOISE more and INCREASE THE HEAT output of the basic fan by another 20% at the same time .It is more energy efficient than other stove fan and INCREASE THE HEATING EFFICIENCY of the stove.
- EXQUISITE WORKMANSHIP - This fan is NOT ONLY improved in materials, but also the edges and details of the stove fan are carefully hemmed, without any sticky feeling, more safer to use. Integrated spray paint, the body is evenly colored and shiny, high-grade and texture.Good choice for personal use and gift.
- See more on Amazon...
Brand: CONBOLA | Manufacturer: CONBOLA
Dimensions: 6.89 x 3.15 x 7.10 inches | Weight: 1.12 Pounds
See On Amazon #8
PYBBO Heat Powered Wood Chimneys Stove Fan, Pipe Fireplace Fan, 5 Blades Stove Fan, Silent Operation Motors Winter Cocoon Stove Fan for Wood Burning Stove/Pellet/Log with Magnetic Thermometer
Asin: B0BZSC8W49 | Model: 5B-Pipe-new | PartNumber: 5B-Pipe-new
Silent Operation, Spread Heat Around Room And Increase Temperature With Low Noise. The Moving Part Is The Blades Assembly, So The Working Noise Is Below 32Db. It Will Not Interrupt Your Reading, Work, And Other Activities. More Stable And Environmental Protection.
When The Temperature Reaches 212°F, Woodstove Fans Works Great Cfm: 160-220. If The Fan Doesn't Run In Time After Reaching The Temperature, Please Move The Blade Slightly (Please Do Not Touch It Directly With Your Hands). Please Test The Temperature Of The Fireplace Before Purchase And Pay Attention To Monitoring The Temperature Change During Use.
Overheating Protection, The In-Built Bi-Metallic Strip At The Base Of The Stove Fan Is Designed To Raise The Edge Of The Fan Slightly As The Maximum Operating Temperature Is Approached To Protect The Motor And The Moelectric Module. The Stove Fan Can Withstand 65-350 ℃(149-660℉) And Keep Working.
No Batteries Or Mains Electricity Required, The Thermoelectric Module Acts As A Small Generator To Power The Fan's Motor. The Fan Base And Blade Are Made From Anodized Aluminum Which Is Rust-Proof, Wear-Resisting, With Good Thermal Conductivity.
Features
- The stove fan can be fixed on the chimney Pipe of Wood/Log Burner/Fireplace, this new design heat activated fan is suitable for the uneven surface of fireplace and won't take up more space. Improve hot air circulation for greater comfort , and reduce 30% wood costs
- No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
- Silent operation, spread heat around room and increase temperature with low noise. The moving part is the blades assembly, so the working noise is below 32DB. It will not interrupt your reading, work, and other activities. More stable and environmental protection
- Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module. The stove fan can withstand 65-350 (149-660 ) and keep working
- When the temperature reaches 212 F, woodstove fans works great CFM: 160-220. If the fan doesn't run in time after reaching the temperature, please move the blade slightly (Please do not touch it directly with your hands). Please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use
- See more on Amazon...
Brand: PYBBO
Dimensions: 7.80 x 6.30 x 4.70 Inches
See On Amazon #9
Miaton Wood Stove Fan Heat Powered Stove Fan Non Electric | Dual Motor Fireplace Fan | Thermal Fan for Wood Stove | Heat Activated Fan | Cocoon Fan | Wood Burning Stove Fans
Asin: B0CB2XK7KB | Model: MIAT-US-12Blades | PartNumber: MIAT-US-12Blades | Ean: 0768420627640 | UPC: 768420627640
[Longer Service Life]: A Temperature Sensing Module At The Bottom Lifts The Thermal Fan Slightly When The Temperature Is Too High, Preventing Damage To The Thermo Fan From Direct Contact With The Hot Stove. It Also Has A Thermometer, You Are Able To Monitor The Temperature Of The Fireplace All The Time..
[Heat Powered Stove Fan]: No Battery Or Electricity Required - By Converting Heat To Electricity To Power The Heat Activated Fan, It Works Perfectly Even In A Power Outage. Pellet Stove Fan Also Improves The Heat Transfer Efficiency Of The Fireplace, Burning Less Fuel To Keep The Room Warm..
[Widely Used]: Sterling Engine Fan Are Widely Used In Gas, Electric, Pellet Or Wood Burning Stoves To Improve The Circulation Of Warm Air..
[Aluminum Cocoon Fan For Wood Stove]: The Base And Blades Of The Stove Top Fans Are Made Of High-Quality Anodized Aluminum, Which Is Rust-Proof And Durable For Long-Term Use..
[Quiet Operation]: The Heat Activated Fan For Wood Stove Operates At ≤25 Db, Distributing Warm Air Throughout The Room Quietly And Efficiently..
Features
- [Twin Motor Wood Stove Fan]: Our 12-blade woodstove fan is equipped with dual motors that have more power to push 50% more warm air than a 5-blade stove fan.
- [Quiet Operation]: The heat activated fan for wood stove operates at 25 dB, distributing warm air throughout the room quietly and efficiently.
- [Longer Service Life]: A temperature sensing module at the bottom lifts the thermal fan slightly when the temperature is too high, preventing damage to the thermo fan from direct contact with the hot stove. It also has a thermometer, you are able to monitor the temperature of the fireplace all the time.
- [Aluminum Cocoon Fan for Wood Stove]: The base and blades of the stove top fans are made of high-quality anodized aluminum, which is rust-proof and durable for long-term use.
- [Heat Powered Stove Fan]: No battery or electricity required - by converting heat to electricity to power the heat activated fan, it works perfectly even in a power outage. Pellet stove fan also improves the heat transfer efficiency of the fireplace, burning less fuel to keep the room warm.
- [Widely Used]: Sterling engine fan are widely used in gas, electric, pellet or wood burning stoves to improve the circulation of warm air.
- See more on Amazon...
Brand: Miaton | Manufacturer: Miaton
Dimensions: 4.00 x 9.00 x 2.00 Inches | Weight: 1.98 pounds
See On Amazon #10
US Stove Vogelzang HR-6 Heat Reclaimer, Fully Automatic Quiet 130 CFM Blower, Fully Sealed from Flue Gasses, Compatible with all Wood or Coal Stoves, 6 Inch Diameter Flue Pipe
Asin: B000AMAV7U | Model: 086738081863 | PartNumber: 086738081863 | Ean: 0086738081863 | UPC: 086738081863
Brand: Us Stove Company.
Brand: Us Stove.
Manufacturer: Vogelzang.
Brand: Vogelzang | Manufacturer: Vogelzang
Dimensions: 13.00 x 13.00 x 11.00 inches | Weight: 12.00 Pounds
See On Amazon #11
Fireplace Fan Accessories Motor and Power Generation sheet/4-Blade Heat Powered Stove Fan for Wood/Log Burner
Asin: B09F64YZN5 | Ean: 0712297105756 | UPC: 712297105756
✅ 【Fan Core Accessories】Just Remove The Motor And Generator Sheet Before The Wood-Burning Stove Fan Heating Fireplace Fan, And Replace It Directly..
✅ 【Stable Performance 】The Motor Uses Low Iron Loss Silicon Steel Sheet, With Low Temperature Rise, High Efficiency And Small Internal Loss. The Coil Adopts Electrolytic Refined Copper, Which Has Good Conductivity, Is Not Easy To Generate Heat And Has A Long Service Life. Stable Operation And Low Noise.
✅ 【Match Broadly 】These Accessories Are Highly Adaptable And Are Suitable For Most Fireplace Fans On The Market. Please Pay Attention To The Size And Specifications When Buying..
✅【Fan Core Accessories】Motors And Generators Are Important Parts Of Fireplace Fans. Old Or Broken Ones Can Be Replaced Directly, Which Can Make The Fans Reused..
Features
- Save money If your fireplace fan is broken, you only need to spend a small amount of money to buy this accessory. If you replace the broken one, the fan can be restored to work and save you money.
- Fan core accessories Motors and generators are important parts of fireplace fans. Old or broken ones can be replaced directly, which can make the fans reused.
- Fan core accessories Just remove the motor and generator sheet before the wood-burning stove fan heating fireplace fan, and replace it directly.
- Match broadly These accessories are highly adaptable and are suitable for most fireplace fans on the market. Please pay attention to the size and specifications when buying.
- Stable performance The motor uses low iron loss silicon steel sheet, with low temperature rise, high efficiency and small internal loss. The coil adopts electrolytic refined copper, which has good conductivity, is not easy to generate heat and has a long service life. Stable operation and low noise
- See more on Amazon...
Brand: Acekiss | Manufacturer: Acekiss
Weight: 0.02 Pounds
See On Amazon #12
Tomersun Wood Stove Fan, 5 Blades Fireplace Fan, Heat Powered Stove Fan for Wood Burning Stove/Pellet/Log Burner/Fireplace
Asin: B0B7WNHNTV | Model: XYD-6E5B | PartNumber: XYD-6E5B
★ Ultra Quiet Operation: Spread Heat Around Room And Increase Temperature With Low Noise, Improve Warm Air Circulation Which Results In Greater Comfort And Reduce Wood Consumption From Your Stove. Satisfy You To Enjoy Warmth And Comfort In A Quiet Environment..
★ Less Consumption, More Efficiency: Self-Start At Temp As Low As 55°C, No Batteries Required Non-Electric Fan And Our Wood Stove Fan Utilizes The Heat From The Wood Stove And Circulate Them Throughout Room, You Can Enjoy Warmth In You Room, Increasing Your Comfort Without Increasing Your Bill..
★ Overheating Protection Design: Our Wood Stove Fan Has An Overheat Protection Device. The Fireplace Fan Comes With A Bimetallic Safety Device In The Base Of Heat Powered Fireplace Fan. When The Surface Temperature Rises Above Around 250℃, It Will Gently Lift To Protect The Teg And Motor. The Wood Burning Stove Fan Will Automatically Recover Normally As The Surface Temperature Decreases..
★ Silent Operation: Spread Heat Around Room And Increase Temperature With Low Noise, Improve Warm Air Circulation Which Results In Greater Comfort And Reduce Wood Consumption From Your Stove..
Features
- Wood Stove Fan: Be different from other traditional 3/4 blades wood stove fans, our 5 blades heat powered fireplace fan will provide more larger airflow to circulate the warm air horizontally all-around your house to keep it more warm.
- Silent Operation: Spread heat around room and increase temperature with low noise, improve warm air circulation which results in greater comfort and reduce wood consumption from your stove.
- Ultra Quiet Operation: Spread heat around room and increase temperature with low noise, improve warm air circulation which results in greater comfort and reduce wood consumption from your stove. Satisfy you to enjoy warmth and comfort in a quiet environment.
- Overheating Protection Design: Our wood stove fan has an overheat protection device. The fireplace fan comes with a bimetallic safety device in the base of heat powered fireplace fan. When the surface temperature rises above around 250 , it will gently lift to protect the TEG and motor. The wood burning stove fan will automatically recover normally as the surface temperature decreases.
- Less Consumption, More Efficiency: Self-start at temp as low as 55 C, no batteries required non-electric fan and our wood stove fan utilizes the heat from the wood stove and circulate them throughout room, you can enjoy warmth in you room, increasing your comfort without increasing your bill.
- See more on Amazon...
Brand: Tomersun
Dimensions: 8.46 x 4.33 x 6.10 Inches | Weight: 1.00 Pounds
See On Amazon #13
Tomersun Stove Fan 4 Blades Wood Stove Fan Silent Heat Powered Wood Burner Fan for Log Burner/Fireplace/Wood Burning Stove
Asin: B0B3MF5VHR | Model: VDSF684B | PartNumber: VDSF684B | Ean: 0731694450993 | UPC: 731694450993
★ 【Ultra Quiet Operation 】 Spread Heat Around Room And Increase Temperature With Low Noise, Improve Warm Air Circulation Which Results In Greater Comfort And Reduce Wood Consumption From Your Stove. Satisfy You To Enjoy Warmth And Comfort In A Quiet Environment..
★ 【Easy To Use 】 No Special Installation Required, Only Need To Place The Fan For Wood Burning Stove On A Smooth Flat Surface Of Your Stove Top, Near The Side Or Back Of The Stovepipe. The Hotter The Stove Surface Is, The More Air The Fan Circulates..
★ 【Overheating Protection Design 】 Our Wood Stove Fan Has An Overheat Protection Device. The Fireplace Fan Comes With A Bimetallic Safety Device In The Base Of Heat Powered Fireplace Fan. When The Surface Temperature Rises Above Around 250℃, It Will Gently Lift To Protect The Teg And Motor. The Wood Burning Stove Fan Will Automatically Recover Normally As The Surface Temperature Decreases..
★ 【Heat Powered Design 】 The Wood Pellet Fan Converts Heat Into Electricity To Start Working. The Thermal Energy From The Stove Will Be Converted Into Kinetic Energy. No Batteries Or Electricity Is Required. Working Temp Is 150F-662F. Less Consumption, More Efficiency..
Features
- Upgrade 4 blades wood stove fan Be different from other traditional 3/4 blades wood stove fans, our Tomersun 4 blades heat powered fireplace fan will provide more larger airflow to circulate the warm air horizontally all-around your house to keep it more warm.
- Heat powered design The wood pellet fan converts heat into electricity to start working. The thermal energy from the stove will be converted into kinetic energy. No batteries or electricity is required. Working Temp is 150F-662F. Less consumption, more efficiency.
- Ultra quiet operation Spread heat around room and increase temperature with low noise, improve warm air circulation which results in greater comfort and reduce wood consumption from your stove. Satisfy you to enjoy warmth and comfort in a quiet environment.
- Overheating protection design Our wood stove fan has an overheat protection device. The fireplace fan comes with a bimetallic safety device in the base of heat powered fireplace fan. When the surface temperature rises above around 250 , it will gently lift to protect the TEG and motor. The wood burning stove fan will automatically recover normally as the surface temperature decreases.
- Easy to Use No special installation required, only need to place the fan for wood burning stove on a smooth flat surface of your stove top, near the side or back of the stovepipe. The hotter the stove surface is, the more air the fan circulates.
- See more on Amazon...
Brand: Tomersun | Manufacturer: Tomersun
Dimensions: 7.56 x 6.30 x 4.13 inches | Weight: 1.15 Pounds
See On Amazon #14
TEENGSE Heat Powered 8 Blade Wood Stove Fan, Flue Pipe Hanging Fireplace Fan for Home Wood Burning Stove Silent Indoor Stove Accessory Heat Distribution-Black with Magnetic Thermometer
Asin: B0995L1D4B | Model: Fireplace Fan | PartNumber: Fireplace Fan | Ean: 0752349338626 | UPC: 752349338626
★[Longer Working Life]: The Whole Wood Burning Stove Fan Is Made From Anodized Aluminum, Which Is Rust-Proof, Wear-Resisting, With Good Thermal Conductivity ,Not Be Deformed Or Discoloured And Can Withstand High Temperatures Up To 752°F (400°C). The Heat-Powered Stove Fan Has A Higher Thermal Conductivity Efficiency Than Those Steel Ones..
★[Space-Saving And Silent-Operating]:The Stove Fan Can Be Fixed On The Chimney Pipe Of Wood/Log Burner/Fireplace, Stable For Incline Surface And Won't Take Up More Space.And There Is Almost Whisper When Operating.Don't Worry Being Disturpted..
★[Package Includes]: 1 * Double Head Fireplace Fan ; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual;.
★[Larger Air Flow]: This Upgraded Little Stove Fan Have Two Motor, Diffusing Warm Air Throughout The Whole Room Perfectly.Continuously Bring Most Comfortable And Stable Warmth..
★[Working Principle]:By Converting Heat Into Electrical Energy,The Heat Powered Stove Fan Will Automatically Start Working When The Surrounding Reach Certain Tempreture, Accelerating Warm Air Flowing.No Batteries Or Electricity Needed! The Improved Hot Air Circulation Ensures Greater Comfort ,While The Wood Used For The Stove Can Be Reduced By About 40%..
Features
- [NOTE]: The maximum diameter of the clamps is 6.06 inches and the minimum is 3.35 inches. Before purchasing, please measure the size of your pipe to see if it fits this product.The range of working temperature is 122 F~662 F 50 ~350 . Please be sure the tempereture is not over 350 C.Please be free to contact us if you have any problem or concern.
- [Working Principle]:By converting heat into electrical energy,the heat powered stove fan will automatically start working when the surrounding reach certain tempreture, accelerating warm air flowing.No batteries or electricity needed! The improved hot air circulation ensures greater comfort ,while the wood used for the stove can be reduced by about 40%.
- [Longer Working Life]: The whole wood burning stove fan is made from anodized aluminum, which is rust-proof, wear-resisting, with good thermal conductivity ,not be deformed or discoloured and can withstand high temperatures up to 752 F (400 C). The heat-powered stove fan has a higher thermal conductivity efficiency than those steel ones.
- [Larger Air Flow]: This upgraded little stove fan have two motor, diffusing warm air throughout the whole room perfectly.Continuously bring most comfortable and stable warmth.
- [Space-Saving and Silent-Operating]:The stove fan can be fixed on the chimney Pipe of Wood/Log Burner/Fireplace, stable for Incline surface and won't take up more space.And there is almost whisper when operating.Don't worry being disturpted.
- [Package Includes]: 1 * Double Head Fireplace Fan ; 2 * Iron Ring;1* Magnetic Theromometer; 1 * Manual;
- See more on Amazon...
Brand: TEENGSE
Dimensions: 4.33 x 8.35 x 5.71 inches | Weight: 2.16 pounds
Warranty: 2 year manufacturer.
See On Amazon #15
dskaoo Wood Stove Fan Heat Powered Non Electric, 4 Blades Ecofan Fireplace Fan Save Energy, Efficient Heat Distribution, Quiet Wood Burning Stove Fan Thermal Fan for Buddy Heater/Gas Stove
Asin: B0CHMLDMVC | Model: 500J | PartNumber: 500J | Ean: 0739319007676 | UPC: 739319007676
🔥【Energy Saving】Thermal Drive, No Electricity Required, Saving Cost. The Fireplace Simply Pushes Heat To The Ceiling Or Around The Stove. The Stove Fan For Buddy Heater Makes Full Use Of The Heat Generated By The Stove To Generate Electricity And Run, Distributes The Heat To All Areas Of The Room, Reduces Wood Consumption By 28% !.
🔥【Working Guide】① The Fan For Wood Stove Does Not Work When Lower Than 80°C Or Higher Than 345°C. When 80-200°C And 320-345°C, The Wind Speed Is Slower. The Best Temperature Is 200-320°C, The Wind Speed And Heat Dissipation Will Be Perfect. ②When The Cocoon Fan Is Running, Please Do Not Touch. ③If The Highest Temperature Of Your Stove Top Is Lower Than 100°C/212°F, It Is Not Suitable, The Fan Will Not Work Effectively..
🔥【Super Quiet 】The Only Moving Parts Of The Wood Stove Fan Heat Powered Are 4 Blades, The Noise Is Less Than 32Db, So Quiet That You Won't Notice When It's Running, But You Will Feel The Heat! Say Goodbye To Horrible Noise While Enjoying The Hot Air..
🔥【Best Gift】Ecofan Size: 18.2 X 18 X 9.5Cm. No Installation Required, Suitable For Wood, Gas And Pellet Stoves With A Surface Temperature Between 80°C-345°C. (Note: Not Suitable For Stove With Insulation And Marble On Top). Also, It Comes With A Exquisite Package, A Great Christmas Gift, New Year Gift For Friends And Family..
🔥【Safety Design】The Bottom Of The Wood Burning Stove Fan Is Equipped With A Bi-Metal Safety Device. When The Surface Temperature Exceeds 345°C, The Front Of The Heat Fan Is Lifted And Stop Working To Protect The Teg And Motor. The Pellet Stove Fan Has A Handle, Which Can Avoid Burns And Convenient When Moving..
🔥【4 Effective Blades】According To Professional Testing, 4 Blades Are The Most Suitable Combination. The Wind Power Of 3 Blades Fan Is Not Enough. More Than 4 Blades Are Too Heavy For The Motor, Causing The Blades Rotate Slowly And Easily Damage The Motor. The Base Is Firm, Won't Wobble Or Tip Over, Even In The Highest Wind Speeds..
Features
- Efficient Heat Distribution Upgraded stove fan, its speed and air volume have been greatly improved. Our fireplace fan made of high-quality anodized aluminum has better thermal conductivity and will not deform or rust even under high temperature for a long time, a perfect companion to every home that has fireplace.
- 4 Effective Blades According to professional testing, 4 blades are the most suitable combination. The wind power of 3 blades fan is not enough. More than 4 blades are too heavy for the motor, causing the blades rotate slowly and easily damage the motor. The base is firm, won't wobble or tip over, even in the highest wind speeds.
- Energy Saving Thermal drive, no electricity required, saving cost. The fireplace simply pushes heat to the ceiling or around the stove. The stove fan for buddy heater makes full use of the heat generated by the stove to generate electricity and run, distributes the heat to all areas of the room, reduces wood consumption by 28% !
- Safety Design The bottom of the wood burning stove fan is equipped with a bi-metal safety device. When the surface temperature exceeds 345 C, the front of the heat fan is lifted and STOP WORKING to protect the TEG and motor. The pellet stove fan has a handle, which can avoid burns and convenient when moving.
- Super Quiet The only moving parts of the wood stove fan heat powered are 4 blades, the noise is less than 32dB, so quiet that you won't notice when it's running, but you will feel the heat! Say goodbye to horrible noise while enjoying the hot air.
- Best Gift Ecofan size: 18.2 x 18 x 9.5cm. No installation required, suitable for wood, gas and pellet stoves with a surface temperature between 80 C-345 C. (NOTE: Not suitable for stove with insulation and marble on top). Also, it comes with a exquisite package, a great Christmas Gift, New Year Gift for friends and family.
- Working Guide The fan for wood stove does not work when lower than 80 C or higher than 345 C. When 80-200 C and 320-345 C, the wind speed is slower. The best temperature is 200-320 C, the wind speed and heat dissipation will be perfect. When the cocoon fan is running, please do not touch. If the highest temperature of your stove top is lower than 100 C/212 F, it is not suitable, the fan will not work effectively.
- See more on Amazon...
Brand: dskaoo
Dimensions: 7.67 x 3.74 x 7.16 inches | Weight: 1.59 Pounds
See On Amazon #16
Hanaoyo Wood Stove Fan with Double Motors, Stove Fan Heat Powered, Fireplace Fan with Magnetic Thermometer, Wood Stove Accessories Non Electric Fan for Wood/Gas/Log Burner Stove
Asin: B0B8HFMDSV | Model: WSF-02 | PartNumber: WSF-02 | Ean: 0702385187832 | UPC: 702385187832
【Overheating Protection】Our Wood Stove Fan Is Designed With An Overheat Protection Device, Once The Temperature Exceeds 644°F/340°C, This Safety Device Gently Lifts The Front Of The Fan To Protect The Motor And Power Generator. The Heat-Driven Fireplace Fan Then Automatically Returns To Normal As The Surface Temperature Drops. Our Fireplace Fan Comes With A Magnetic Thermometer, So You Can More Easily Keep It In An Optimal Operating Condition..
【Quality After-Sales Service】The Package Includes A Stove Fan And A Magnetic Thermometer. Please Place The Heat Stove Fan Next To The Chimney (Allowing About 15Cm Of Space Behind The Fan), So That The Fan Spreads The Warm Air Into The Room. Meanwhile, We Decided To Provide 30 Days After-Sales Service, No Reason For Your Refund Or Replacement. Any Problem With This Wood Stove Fan Will Be Solved Within 24 Hours, If You Have Any Questions, Please Contact Us..
【Ultra-Quiet Motor Operating】New Upgraded Wood Stove Fan Heat Powered, More Airflow But Less Noise, This Wood Stove Eco Fan With A Noise Level Of Less Than 25 Db, Giving You A Peaceful Atmosphere. So The Operation Of The Fireplace Fan Will Not Disturb Your Work, Reading And Other Activities. You Will Enjoy The Warm Air In A Quiet And Comfortable Environment..
【Upgraded Double Motors】Upgraded Fireplace Fan With Double Motors, Different From Other Stove Fan, Multiple Scientific Tests Have Shown That Our Heat Powered Stove Fan Circulates 80% More Warm Air Than A Standard 4-Blade Fan. So Our Fireplace Fan Distributes Warm Air More Efficiently Around Your Room..
Features
- Heat Powered Stove Fan Our wood stove fan is an Eco-friendly stove fan. Without any external power or electricity, the heat that provided by the wood burning stove top is converted into electricity, and the stove fan spreads the heat throughout the room. The improved circulation of warm air brings greater comfort, and increases the overall efficiency of the wood stove, burning less fuel to keep the room warm.
- Upgraded Double Motors Upgraded fireplace fan with Double Motors, different from other stove fan, multiple scientific tests have shown that our heat powered stove fan circulates 80% more warm air than a standard 4-blade fan. So our fireplace fan distributes warm air more efficiently around your room.
- Overheating Protection Our wood stove fan is designed with an overheat protection device, Once the temperature exceeds 644 F/340 C, this safety device gently lifts the front of the fan to protect the motor and power generator. The heat-driven fireplace fan then automatically returns to normal as the surface temperature drops. Our fireplace fan comes with a magnetic thermometer, so you can more easily keep it in an optimal operating condition.
- Ultra-Quiet Motor Operating New upgraded wood stove fan heat powered, more airflow but less noise, this wood stove Eco fan with a noise level of less than 25 dB, giving you a peaceful atmosphere. So the operation of the fireplace fan will not disturb your work, reading and other activities. You will enjoy the warm air in a quiet and comfortable environment.
- Quality After-Sales Service The package includes a stove fan and a magnetic thermometer. Please place the heat stove fan next to the chimney (allowing about 15cm of space behind the fan), so that the fan spreads the warm air into the room. Meanwhile, we decided to provide 30 days after-sales service, no reason for your refund or replacement. Any problem with this wood stove fan will be solved within 24 hours, if you have any questions, please contact us.
- See more on Amazon...
Brand: Hanaoyo | Manufacturer: Hanaoyo
Dimensions: 7.78 x 2.87 x 6.30 Inches | Weight: 1.93 pounds
See On Amazon #17
6-Blade Heat Powered Stove Fan for Wood/Log Burner/Fireplace increases 80% more warm air than 2 blade fan
Asin: B09JLHR4MD | Ean: 0794391086766 | UPC: 794391086766
【Whisper Quiet】-- Newly Designed Blade, Larger Air Volume, Lower Noise. The Only Moving Part Is The Blades Assembly, So The Working Noise Is Below 32Db. You Will Enjoy The Warm Air In A Quiet And Comfortable Environment.
【Extra Gifts】-- Stove Thermometer And Anti-Scald Gloves, When You Need To Move The Fan, This Glove Can Prevent Scalding, And The Thermometer Can Effectively Monitor The Temperature To Avoid Overheating.
【90 Days Warranty】-- Unconditional 90Days Warranty On This Stove Fan. Our Service Center Will Do Our Best To Make You Satisfied. Get Yours Now By Clicking "Add To Cart" Button On The Right. ( From Your Review, Amazon Do Not Provide The Access To Your Order Details, We Don't Have A Chance To Contact You To Solve Your Issues. If You Need Any Help Please Email Me )..
【Premium Quality】-- Made With High-Temperature Resistant Anodized Aluminum, The Stove Fan Is Designed For Usage On Freestanding Stoves With A Normal Surface Temperature Of Between 70℃-375℃(158℉-707℉).
【Easy Operation】-- No Assembly Is Required, Just Place The Fireplace Fan On Top Of The Furnace And The Heat Fan Will Spin As The Temperature Rises.Heat Powered Stove Fans Are Widely Used In Wood-Burning Stoves, Gas Stoves, Pellet Stoves, Etc..
【Eco-Friendly】-- Heat Powered, The Stove Fan Generates Its Own Energy By The Heat From The Stove Surface, No Batteries Or Electricity Required, And Can Efficiently Circulate Warm Air Throughout The Room.
Features
- 2023 Upgrade 6-Blade Stove Fan -- 2023 new stove fan composed of 6 blades,can produce more warm air and improve the efficiency of the product. It is widely used in wood stove, gas stove, Log Burner, Fireplace etc. With thermometer can detect the working temperature at any time to ensure the safety of the furnace. The effective working distance of a 6-blade stove top fans can reach 3 meters, which is twice the working distance of a 3-blade fan of 1.5 meters.
- Eco-friendly -- Heat Powered, the stove fan generates its own energy by the heat from the stove surface, no batteries or electricity required, and can efficiently circulate warm air throughout the room
- Whisper Quiet -- Newly designed blade, larger air volume, lower noise. The only moving part is the blades assembly, so the working noise is below 32DB. You will enjoy the warm air in a quiet and comfortable environment
- Easy Operation -- No assembly is required, just place the fireplace fan on top of the furnace and the heat fan will spin as the temperature rises.Heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc.
- 90 Days Warranty -- Unconditional 90days warranty on this stove fan. Our Service Center will do our best to make you satisfied. Get yours now by clicking Add to Cart button on the right. ( From your review, Amazon do not provide the access to your order details, we don't have a chance to contact you to solve your issues. If you need any help please email me ).
- Premium Quality -- Made with high-temperature resistant anodized aluminum, The stove fan is designed for usage on freestanding stoves with a normal surface temperature of between 70 -375 (158 -707 )
- Extra Gifts -- Stove thermometer and anti-scald gloves, When you need to move the fan, this glove can prevent scalding, and the thermometer can effectively monitor the temperature to avoid overheating
- See more on Amazon...
Brand: Melede
Dimensions: 6.00 x 9.00 x 7.00 Inches
See On Amazon #18
Hanaoyo Upgraded Wood Stove Fan Max Airflow, Large-Sized Heat Powered Stove Fan Non Electric Fireplace Fan, Wood Stove Accessories, Stove Fan for Wood/Gas/Log Burner Stove/Fireplace
Asin: B0C8NQSDM1 | Model: SF-100A | PartNumber: SF-100A | Ean: 0702385187689 | UPC: 702385187689
【Eco Friendly & Economical】 No Batteries Or Electricity Needed, Our Wood Stove Fan Is Powered By Heat Generated From The Stove. When The Stove Temperature Reaches A Certain Range, The Fan Will Start Rotating Automatically. Through The Rapid Rotation Of The Fan, The Warm Air Will Circulate Quickly In The Room, Making You Feel Warmer. Tested And Proven To Save You Up To 18% In Fuel With More Efficient Distribution Of Heat From Your Wood Stove..
【Quality After-Sales Service】 Hanaoyo Stove Fan Is Guaranteed For 366 Days With 100% Money Back Or Unconditional Replacement. No Need To Worry About Product Quality And Customer Service When Purchasing. The First Time You Use It, If The Temperature Is High Enough And The Fan Still Doesn't Spin, Please Contact Us And We Will Replace One For You. If You Have Any Questions, Please Contact Us, We Will Reply You In 24 Hours!.
【Ultra-Quiet Motor Operating】 As The Blades Are The Only Moving Components, Even At The Highest Speed, The Operational Noise Of The Log Burner Fan Is Lower Than 25Db. You May Not Even Feel The Presence Of The Furnace Fan, But You Will Still Sense A Gentle Breeze. The Rotation Of The Fan Facilitates Air Circulation, Circulating Heat To All Around And Making You Feel Warmer..
【Premium Quality】Our Wood Stove Fan Is Made Of High-Quality Anodized Aluminum, Which Is Rustproof And Has Excellent Thermal Conductivity. The Dual-Chip Design Makes The Motor More Durable And Efficient. It Is Larger In Size And Heavier Than Other Ordinary Fans On The Market, Making It More Sturdy And Durable. Testing Has Shown That This Fireplace Fan Can Increase The Speed Of Room Heating By 45%..
Features
- Upgraded Max Airflow The newly upgraded fireplace fan is made of premium aluminum components and adopts a dual-chip design, which provides a longer, more stable and durable motor with higher performance. It can reach an airflow of 250CFM, which is 80% larger than than other stove fans on the market. the 2-blade design reduces the resistance of the motor, further improves the performance and prolongs the life of the motor, and it's heavier, sturdier, and more efficient than a normal 4-blade fan.
- Premium Quality Our wood stove fan is made of high-quality anodized aluminum, which is rustproof and has excellent thermal conductivity. The dual-chip design makes the motor more durable and efficient. It is larger in size and heavier than other ordinary fans on the market, making it more sturdy and durable. Testing has shown that this fireplace fan can increase the speed of room heating by 45%.
- Eco Friendly & Economical No batteries or electricity needed, our Wood Stove Fan is powered by heat generated from the stove. When the stove temperature reaches a certain range, the fan will start rotating automatically. Through the rapid rotation of the fan, the warm air will circulate quickly in the room, making you feel warmer. Tested and proven to save you up to 18% in fuel with more efficient distribution of heat from your wood stove.
- Ultra-Quiet Motor Operating As the blades are the only moving components, even at the highest speed, the operational noise of the log burner fan is lower than 25db. You may not even feel the presence of the furnace fan, but you will still sense a gentle breeze. The rotation of the fan facilitates air circulation, circulating heat to all around and making you feel warmer.
- Quality After-Sales Service Hanaoyo Stove Fan is guaranteed for 366 days with 100% money back or unconditional replacement. No need to worry about product quality and customer service when purchasing. The first time you use it, if the temperature is high enough and the fan still doesn't spin, please contact us and we will replace one for you. If you have any questions, please contact us, we will reply you in 24 hours!
- See more on Amazon...
Brand: Hanaoyo
Dimensions: 5.67 x 11.20 x 10.35 inches | Weight: 2.65 pounds
See On Amazon #19
Ecofan UltrAir, Classic Styled, Heat Powered Wood Stove Fan, 125 CFM, 810CAKBX, Mid-Sized, 7.9" Blade, Nickel
Asin: B0090K68PC | Model: 810CAKBX | PartNumber: 810CAKBX
Ean: 8851293287744, 8944444615425, 7222335431806, 0014444820889, 0062503810012, 0885129771242, 0012304172109, 0787683740682
UPC: 062503810012
Tested And Proven To Save You Up To 14% In Fuel With More Efficient Distribution Of Heat From Your Wood Stove.
Designed And Manufactured In Canada For Over 20 Years, Ecofans Have Been Tested In The Harshest Winters And Come With A 2 Year Limited Warranty.
125 Cfm.
No Electricity Needed, Ecofans Generate Power By Converting The Heat From Your Wood Stove Into Electricity.
Ideal For Rooms Up To 240 Square Feet, The Ultrair Circulates More Warm Air Further Into Your Room!.
Features
- Warm your room up to 31% faster with the mid-sized Ecofan model, the Ecofan UltrAir
- Ideal for rooms up to 240 square feet, the UltrAir circulates more warm air further into your room!
- Tested and proven to save you up to 14% in fuel with more efficient distribution of heat from your wood stove
- No electricity needed, Ecofans generate power by converting the heat from your wood stove into electricity
- Designed and manufactured in Canada for over 20 years, Ecofans have been tested in the harshest winters and come with a 2 year limited warranty
- 125 CFM
- See more on Amazon...
First Available: 08/15/2012
Brand: Ecofan | Manufacturer: Caframo Limited
Dimensions: 11.50 x 18.25 x 11.50 inches | Weight: 1.65 pounds
Warranty: 2 years.
See On Amazon #20
CXhome Heat Powered Stove Fan for Wood, Fast Start, 4-Blade Fireplace Fans, Ultra Quiet, Increases 80% more Warm Air, Energy Saving, Carbon Emission Reduction
Asin: B0819S7T4S | Model: 601.21.081 | PartNumber: 601.21.081 | Ean: 0675234324316 | UPC: 675234324316
【Fast Start】 When The Base Reaches The Specified Temperature (104 ° F To 150 ° F), The Fan Starts To Rotate. The Warmer The Base Of The Fan, The Faster The Fan Rotates, And The More The Fan Circulates In The Room . It Will Slow Down And Stop While The Stove Is Cooling Down. Operating Temperature: 104°F To 644°F.
【Work Quietly】Quiet Work, No More Airflow. Wood Stove Fan With The Unique Design Of The Blade, The Oven Blower Can Drive More Warm Air With Quiet Operation. No Noise. You Will Enjoy The Warm Air In A Calm And Comfortable Environment..
【Anodized Aluminum Material】The Fireplace Fan Assembly Is Made Of Anodised Aluminum, Which Will Not Rust And Corrode If The Fan Overheats. A Bimetallic Safety Device Is Installed At The Base Of The Fan. If The Surface Temperature Exceeds 300°C, The Safety Device Gently Raises The Front Of The Fan To Protect The Teg And The Motor..
【Upgrade 4 Blades For Better Results】Upgrade 4 Blades And Dispense Warm Air Throughout The Room. Simply Place The Stove Fan On A Flat, Smooth Surface On The Top Of Your Stove, Near The Side Or Back Of The Stovepipe. You Must Place The Stove Fan At Least 4 Inches From The Stovepipe. This Will Work When The Stove Surface Is Hot..
Features
- ENERGY SAVING AND ENVIRONMENTALLY FRIENDLY 4-blade heat powered stove fan for stove works without batteries, ropes or electricity and is environmentally friendly. It generates its own energy thanks to the heat released by the surface of the stove. The base of the fan transmits the heat to the units of production of electricity and the units of electricity production convert the heat energy into kinetic energy. The energy necessary to drive the motor, then the blades turn.
- UPGRADE 4 BLADES FOR BETTER RESULTS Upgrade 4 blades and dispense warm air throughout the room. Simply place the stove fan on a flat, smooth surface on the top of your stove, near the side or back of the stovepipe. You must place the stove fan at least 4 inches from the stovepipe. This will work when the stove surface is hot.
- FAST START When the base reaches the specified temperature (104 F to 150 F), the fan starts to rotate. The warmer the base of the fan, the faster the fan rotates, and the more the fan circulates in the room . It will slow down and stop while the stove is cooling down. Operating temperature: 104 F to 644 F
- ANODIZED ALUMINUM MATERIAL The fireplace fan assembly is made of anodised aluminum, which will not rust and corrode if the fan overheats. A bimetallic safety device is installed at the base of the fan. If the surface temperature exceeds 300 C, the safety device gently raises the front of the fan to protect the TEG and the motor.
- WORK QUIETLY Quiet work, no more airflow. Wood stove fan with the unique design of the blade, the oven blower can drive more warm air with quiet operation. No noise. You will enjoy the warm air in a calm and comfortable environment.
- See more on Amazon...
Brand: CXhome | Manufacturer: CXhome
Dimensions: 8.27 x 6.30 x 4.72 inches | Weight: 1.74 Pounds
See On Amazon
Looking For Something Else?
Search