4692269AI Battery Current Temperature Sensor for 11-16 Chrysler 200 300/11-16 Jeep Wrangler Cherokee/13-17 Dodge Ram 1500 2500 3500 Charger Journey Challenger Viper/13-19 Fiat 500 Replaces# 4692269AG
Asin: B0CQYNGR3G
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✔Oe# 4692269Ai. Replace Oe# 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af. Package Included: Battery Current Sensor X1, With Pigtail Connector. The Sensor Measures The Current To And From The Battery, Also Monitor The Voltage, State Of Charge And State Of Health Of The Battery (Aging). Easy To Install, It Fits Perfectly And Has Accurate Structure, Without Instruction Manual..
✔After-Sales Service: We Offer 24 Hours Customer Service And 1 Year Product Service, If You Are Encounter Product Installation, Product Quality And Other Problems, Please Feel Free To Contact Us..
✔Repalce Honda Battery Current Sensor: 1. Disconnect The Negative Cable And Loosen The Bolt With A Bolt Wrench. 2. Use A Bolt Wrench To Remove The Bolts On The Other Side Of The Wiring 3. Remove The Old Battery Sensor, Replace With The New Battery Sensor, And Reconnect The Cables And Bolts. (Notice: Doesn't Compatible With Honda Civic!!).
✔Function: The Battery Sensor Manufactured From High-Quality Materials, The Pigtail Connector Are Designed Using Copper Alloy Conductors To Ensure High Performance. It Can Be Connected Tightly With The Original Cables, Ensure The Stability Of Installation And Sensing, Solve Your Charging System Problem And Back To The Road..
Features
- Compatible with: For 2015-2016 Dodge Challenger 2011-2017 Dodge Charger 2011-2017 Dodge Journey 2013-2015 Dodge Viper 2013-2016 Dodge RAM 1500 2014-2016 Dodge RAM 2500 2013-2016 Dodge RAM 3500. For 2011- 2016 Jeep Wrangler 2014-2016 Jeep Cherokee. For 2015-2016 Chrysler 200 2011-2016 Chrysler 300. For 2013-2019 Fiat 500. Please check the second main picture to confirm battery voltage temperature sensor whether compatible with your car.
- Function: The battery sensor manufactured from high-quality materials, the pigtail connector are designed using copper alloy conductors to ensure high performance. It can be connected tightly with the original cables, ensure the stability of installation and sensing, solve your charging system problem and back to the road.
- OE# 4692269AI. Replace OE# 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF. Package included: Battery Current Sensor x1, with Pigtail Connector. The sensor measures the current to and from the battery, also monitor the voltage, state of charge and state of health of the battery (aging). Easy to install, it fits perfectly and has accurate structure, without instruction manual.
- Repalce Honda Battery Current Sensor: 1. Disconnect the negative cable and loosen the bolt with a bolt wrench. 2. Use a bolt wrench to remove the bolts on the other side of the wiring 3. Remove the old battery sensor, replace with the new battery sensor, and reconnect the cables and bolts. (NOTICE: Doesn't compatible with Honda Civic!!)
- After-Sales Service: We offer 24 hours customer service and 1 year product service, If you are encounter product installation, product quality and other problems, please feel free to contact us.
- See more on Amazon...
Brand: X4XZ | Manufacturer: X4XZ
See On Amazon Similar To 4692269AI Battery Current Temperature Sensor
#1
38920-TR0-A02 Battery Current Sensor/Battery Voltage Temperature Sensor for 2012-2015 Honda Civic, 2012-2016 Honda Crv/2013-2021 Acura ILX, 2013-2018 Acura RDX 38920-TR0-A01 (with Pigtail Connector)
Asin: B0CH4RKRW1
✔Package Included: Battery Current Sensor X1, With Pigtail Connector. The Sensor Measures The Current To And From The Battery, Also Monitor The Voltage, State Of Charge And State Of Health Of The Battery (Aging). Easy To Install, It Fits Perfectly And Has Accurate Structure, Without Instruction Manual..
✔After-Sales Service: We Offer 24 Hours Customer Service And 1 Year Product Service, If You Are Encounter Product Installation, Product Quality And Other Problems, Please Feel Free To Contact Us..
✔Repalce Honda Battery Current Sensor: 1. Disconnect The Negative Cable And Loosen The Bolt With A Bolt Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With A Bolt Wrench 3. Remove The Old Battery Sensor, Replace It With A New One, And Reconnect The Cables And Bolts. (Notice: For Honda Models, Additional 13Mm Nuts Are Required And Will Remain Energized During Installation.).
✔Function: The Battery Sensor Manufactured From High-Quality Materials, The Pigtail Connector Are Designed Using Copper Alloy Conductors To Ensure High Performance. It Can Be Connected Tightly With The Original Cables, Ensure The Stability Of Installation And Sensing, Solve Your Charging System Problem And Back To The Road..
Features
- OE# 38920-TR0-A02. Replace OE# 38920-TR0-A01,38920TR0A01 .Compatible with: For 2012-2015 Honda Civic 2012-2016 Honda CRV 2013-2021 Acura ILX 2013-2018 Acura RDX 2013-2014 Acura ILX Hybrid. Please check the second main picture to confirm battery voltage temperature sensor whether compatible with your car.
- Function: The battery sensor manufactured from high-quality materials, the pigtail connector are designed using copper alloy conductors to ensure high performance. It can be connected tightly with the original cables, ensure the stability of installation and sensing, solve your charging system problem and back to the road.
- Package included: Battery Current Sensor x1, with Pigtail Connector. The sensor measures the current to and from the battery, also monitor the voltage, state of charge and state of health of the battery (aging). Easy to install, it fits perfectly and has accurate structure, without instruction manual.
- Repalce Honda Battery Current Sensor: 1. Disconnect the negative cable and loosen the bolt with a bolt wrench. 2. Remove the bolt on the other side of the wiring with a bolt wrench 3. Remove the old battery sensor, replace it with a new one, and reconnect the cables and bolts. (NOTICE: For Honda models, additional 13mm nuts are required and will remain energized during installation.)
- After-Sales Service: We offer 24 hours customer service and 1 year product service, If you are encounter product installation, product quality and other problems, please feel free to contact us.
- See more on Amazon...
Brand: X4XZ | Manufacturer: X4XZ
See On Amazon #2
MOCW 4692269AI Battery Current Sensor Fit for Jeep Chrysler Dodge Fiat 38920-TR0-A02 4692269AH Battery Voltage Temperature Sensor
Asin: B09T9KFGT1 | Model: 4692269AI, 38920-TR0-A02 | PartNumber: 4692269AI, 38920-TR0-A02 | Ean: 0768607220718 | UPC: 768607220718
【Fitments】The Battery Voltage Temperature Sensor Fit For 2015 - 2016 Chrysler 200, For 2011 - 2016 Chrysler 300 & Jeep Wrangler; For 2014 - 2016 Jeep Cherokee; For 2015 - 2016 Dodge Challenger; For 2011 - 2017 Dodge Charger & Journey; For 2013 - 2015 Dodge Viper; For 2013 - 2016 Dodge Ram 1500/3500; For 2014 - 2016 Dodge Ram 2500; For 2013 - 2019 Fiat 500;.
【High Quality Circuit Technology】Better Surface Treatment And Circuit Technology Than Most Similar Products..
【Oem Part Number】It Replace Oe: 4692269Ai, 4692269Ag, 4692269Ah,38920-Tr0-A02, 04692269Ae, 04692269Af,04692269Ag, 04692269Ad. To Sure You Purchase Correct Item, Please Check Oe Number And Compatibility Before Purchase It!.
【Note】Please Note It Is Direct Replacement For Dodge, Chrysler, Jeep, Fiat Series. But For Honda Series, It Needs To Replace 13Mm Nuts, Because Ours Is 8Mm..
Features
- OE Specifications The Battery Current Sensor is manufactured in accordance with OE specifications and provide excellent performance and long service life.
- Note Please note it is direct replacement for Dodge, Chrysler, Jeep, Fiat series. But for Honda series, it needs to replace 13mm nuts, because ours is 8mm.
- Fitments The Battery Voltage Temperature Sensor Fit for 2015 - 2016 Chrysler 200, for 2011 - 2016 Chrysler 300 & Jeep Wrangler; for 2014 - 2016 Jeep Cherokee; for 2015 - 2016 Dodge Challenger; for 2011 - 2017 Dodge Charger & Journey; for 2013 - 2015 Dodge Viper; for 2013 - 2016 Dodge RAM 1500/3500; for 2014 - 2016 Dodge RAM 2500; for 2013 - 2019 Fiat 500;
- OEM Part Number It replace OE: 4692269AI, 4692269AG, 4692269AH,38920-TR0-A02, 04692269AE, 04692269AF,04692269AG, 04692269AD. To sure you purchase correct item, please check OE number and compatibility before purchase it!
- High Quality Circuit Technology Better surface treatment and circuit technology than most similar products.
- See more on Amazon...
Brand: MOCW | Manufacturer: Kunttai
Weight: 0.29 pounds
See On Amazon #3
Dexonu Battery Current Sensor Compatible with Chrysler Dodge Jeep Fiat & Honda Civic CR-V 2.4 12-15 Replace 4692269AI 38920-TR0-A02 Battery Voltage Temperature Sensor
Asin: B0CKX4VWMG
【Replacement Part Number】Battery Current Sensor Replacement Part Number: 4692269Ai, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af 38920-Tr0-A02 To Make Sure You Purchase The Correct Item, Please Check The Oe Number And Compatibility Before Purchasing It!.
【Precautions】 It Is Recommended To Install The Battery Current Sensor With The Power On To Avoid The Need For Re-Matching. However, If The Sensor Is Replaced While The Power Is Off, It Is Necessary To Rematch The Sensor Through The Computer After The Replacement Is Completed. Failure To Do So May Result In The Sensor Not Functioning Properly..
【Compatible Models】The Battery Boltage Temperature Sensor Compatibility With Chrysler 200 2015-2016, Chrysler 300 2011-2016, Dodge Challenger 2015-2016, Dodge Charger & Journey 2011-2017, Jeep Wrangler 2011-2016, Jeep Cherokee 2014-2016, Dodge Ram 1500 2500 3500 2013-2016, Fiat 500 2013-2019, Honda Civic & Cr-V 2.4L 2012-2015.
【Find Fault】 When The Battery System Has Problems Such As Difficulty In Starting, High Idle Speed, Or The Start-Stop System Does Not Work, We Need To Replace It With A New Battery Current Sensor.
Features
- Accurate measurement it can accurately measure the battery's current ensuring that the battery is operating optimally and preventing potential issues such as overcharging or undercharging.
- Find fault When the battery system has problems such as difficulty in starting, high idle speed, or the start-stop system does not work, we need to replace it with a new battery current sensor
- Replacement Part Number Battery Current Sensor Replacement Part Number: 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF 38920-TR0-A02 To make sure you purchase the correct item, please check the OE number and compatibility before purchasing it!
- Compatible models The battery boltage temperature sensor Compatibility with Chrysler 200 2015-2016, Chrysler 300 2011-2016, Dodge Challenger 2015-2016, Dodge Charger & Journey 2011-2017, Jeep Wrangler 2011-2016, Jeep Cherokee 2014-2016, Dodge RAM 1500 2500 3500 2013-2016, Fiat 500 2013-2019, Honda Civic & CR-V 2.4L 2012-2015
- Precautions It is recommended to install the Battery Current Sensor with the power on to avoid the need for re-matching. However, if the sensor is replaced while the power is off, it is necessary to rematch the sensor through the computer after the replacement is completed. Failure to do so may result in the sensor not functioning properly.
- See more on Amazon...
Brand: Dexonu | Manufacturer: Dexonu
See On Amazon #4
4692269AI 4692269AH Battery Current Temperature Sensor for Dodge Journey Fiat 500 Jeep-Wrangler Cherokee Chrysler Ram 1500 2500 3500
Asin: B09PQBQ6D4 | Model: 4692269AI 38920-TR0-A02 38920TR0A02 | PartNumber: 4692269AI 38920-TR0-A02 38920TR0A02
👉【Quality Assurance】 Manufactured From High Quality Materials , Meets Or Exceeds Oem Standards And Very Stable, Tested Before Shipping..
👉【Buy With Confidence】This Battery Current Sensor Comes With A 1 Year Warranty. Hassle-Free Return And Refund Policy, So Buy With Confidence!.
👉【Easy Installation】1. Disconnect The Negative Cable And Loosen The Bolt With A Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With A Wrench 3. Remove The Old Battery Sensor 4. Replace It With A New One And Reconnect The Cable And Bolt..
👉【 Compatibility】 For 2011-2020 Dodge Journey For 2013-2019 Fiat 500 , For 2011-2018 Jeep Wrangler, For 2015-2016 Chrysler 200 , For 2011-2016 Chrysler 300 , For 2015-2016 Dodge Challenger , For 2011-2016 Dodge Charger , For 2014-2016 Jeep Cherokee , For 2013-2016 Ram 1500/2500/3500,2015 Dodge Viper..
Features
- OEM number 4692269AI,4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF
- Compatibility For 2011-2020 Dodge Journey For 2013-2019 Fiat 500 , For 2011-2018 Jeep Wrangler, For 2015-2016 Chrysler 200 , For 2011-2016 Chrysler 300 , For 2015-2016 Dodge Challenger , For 2011-2016 Dodge Charger , For 2014-2016 Jeep Cherokee , For 2013-2016 Ram 1500/2500/3500,2015 Dodge Viper.
- Quality Assurance Manufactured from high quality materials , meets or exceeds OEM standards and very stable, tested before shipping.
- Easy Installation 1. Disconnect the negative cable and loosen the bolt with a wrench. 2. Remove the bolt on the other side of the wiring with a wrench 3. Remove the old battery sensor 4. Replace it with a new one and reconnect the cable and bolt.
- Buy with confidence This Battery Current Sensor comes with a 1 year warranty. Hassle-free return and refund policy, so buy with confidence!
- See more on Amazon...
Brand: VANPERT | Manufacturer: VANPERT
Dimensions: 1.10 x 3.70 x 2.75 Inches
See On Amazon #5
Battery Current Sensor Compatible with Jeep Chrysler Dodge Fiat & Honda Civic cr-v 2012-2015 2.4L, Battery Voltage Temperature Sensor Replacement Part, Replaces Number # 38920-TR0-A02# 4692269AI
Asin: B09K3HF42N | Model: 38920-TR0-A02, 4692269AI | PartNumber: 38920-TR0-A02, 4692269AI | Ean: 0752811588771 | UPC: 752811588771
🚗【Premium Quality】This Battery Current Sensor Has A Long Service Life And Excellent Performance. The Surface Treatment And Circuit Technology Is Superior To Most Similar Products. Replace The Old Battery Sensor, Solve The Charging System Problem And Get Back On The Road!.
🚗【100% Satisfaction Service】If You Have Any Questions Or Dissatisfaction About The Product Model And Suitable Model, Please Send Email To Us, We Will Help You Solve It Perfectly..
🚗【Easy Installation】1. Disconnect The Negative Cable And Loosen The Bolt With A Bolt Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With A Bolt Wrench. 3. Remove The Old Battery Sensor, Replace With A New One, And Reconnect The Cables And Bolts. 5 Minutes Or Less. Saves Money And Labor! ( Note: For Honda Models, An Additional 13Mm Wrench Is Required: For Honda Models, An Additional 13Mm Nut Is Required And Remains Energized During Installation..
🚗【Adaptation Models】Prefect Compatible With Jeep Cherokee/Wrangler, Chrysler 200/300, Dodge Challenger/ Charger/ Journey/ Viper/ Ram 1500/2500/3500, Fiat 500 And Honda Civic & Cr-V 2.4L 2012-2015. ( Oe: 38920-Tr0-A02, 4692269Ai, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af. ).
Features
- OEM DESIGN This battery current sensor is manufactured to original factory specifications. It can be tightly connected to the original cable to ensure installation and sensing stability. ( NOTE: Dodge, Chrysler, Jeep, Fiat series can be installed directly; Honda series need to replace 13mm nuts. Please read the installation instructions in the description carefully to avoid mismatches. )
- ADAPTATION MODELS Prefect compatible with Jeep Cherokee/Wrangler, Chrysler 200/300, Dodge Challenger/ Charger/ Journey/ Viper/ RAM 1500/2500/3500, Fiat 500 and Honda Civic & CR-V 2.4L 2012-2015. ( OE: 38920-TR0-A02, 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF. )
- PREMIUM QUALITY This battery current sensor has a long service life and excellent performance. The surface treatment and circuit technology is superior to most similar products. Replace the old battery sensor, solve the charging system problem and get back on the road!
- Easy Installation 1. Disconnect the negative cable and loosen the bolt with a bolt wrench. 2. Remove the bolt on the other side of the wiring with a bolt wrench. 3. Remove the old battery sensor, replace with a new one, and reconnect the cables and bolts. 5 minutes or less. Saves money and labor! ( NOTE: For Honda models, an additional 13mm wrench is required: For Honda models, an additional 13mm nut is required and remains energized during installation.
- 100% SATISFACTION SERVICE If you have any questions or dissatisfaction about the product model and suitable model, please send email to us, we will help you solve it perfectly.
- See more on Amazon...
Brand: Sionse | Manufacturer: Sionse
Warranty: 3-Year Warranty
See On Amazon #6
AUTOBABA Battery Current Sensor Compatible with 2011-2019 Chrysler 200 300 Jeep Cherokee Dodge Challenger Charger & Journey Viper RAM Fiat 500 Honda Civic & CR-V Replaces 38920-TR0-A02 4692269AI
Asin: B0BWY5JQC2
【Function】The Sensor Informs The Car Of The Exact Battery Status, Measures The Temperature And Controls The Charging Voltage And Charging Current Accordingly..
【Service】Temsone Offers 1 Year Product Quality Support To Our Customers. If You Are Uncertain Of Any Problems, Please Contact Us..
【Meet Oe Quality】Manufactured In Accordance With Oe Specifications..
【Replace Number】38920-Tr0-A02, 4692269Ai, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af.
Features
- Fitment Compatible with 2015-2016 Chrysler 200; 2011-2016 Chrysler 300 & Jeep Wrangler;2014-2016 Jeep Cherokee; 2015-2016 Dodge Challenger; 2011-2017 Dodge Charger & Journey; 2013-2015 Dodge Viper; 2013-2016 Dodge RAM 1500/3500; 2014-2016 Dodge RAM 2500; 2013-2019 Fiat 500; 2012-2015 Honda Civic & CR-V 2.4L.
- Replace Number 38920-TR0-A02, 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF
- Function The sensor informs the car of the exact battery status, measures the temperature and controls the charging voltage and charging current accordingly.
- Meet OE quality Manufactured in accordance with OE specifications.
- Service TEMSONE offers 1 year product quality support to our customers. If you are uncertain of any problems, please contact us.
- See more on Amazon...
Brand: AUTOBABA | Manufacturer: AUTOBABA
See On Amazon #7
YuanchiNB Battery Current Sensor Compatible with Chrysler Dodge Jeep Ram, Battery Voltage Temperature Sensor Replacement Part, Replaces Number 4692269AI
Asin: B0CQXDLXYX | Model: YC-4692269AI | PartNumber: YC-4692269AI
【Oem Design】The Battery Voltage Temperature Sensor Is Made Of High-Quality Materials And Advanced Technology, Providing Excellent Durability And Reliability. Manufactured To Original Factory Specifications. Can Be Tightly Connected With The Original Cable To Ensure Installation And Sensing Stability..
【Buy With Confidence】We Stand Behind The Quality Of Our Product. This Battery Current Sensor Comes With 12 Months Warranty.Buy With Confidence And Enjoy The Peace Of Mind That Comes With Knowing You Have A High-Quality Product.If You Have Any Questions, Please Send Email To Us, We Will Help You Solve It Perfectly..
【Easy To Install】1. Disconnect The Negative Cable And Loosen The Bolts With A Bolt Wrench. 2. Use A Bolt Wrench To Remove The Bolts On The Other Side Of The Wiring. 3. Remove The Old Battery Sensor, Replace With The New Battery Sensor, And Reconnect The Cables And Bolts..
【Battery Health Monitoring】These Sensors Allow For Real-Time Monitoring Of The Current Flowing Into And Out Of The Battery. This Information Is Crucial For Assessing The Health Of The Battery, Detecting Any Anomalies, And Preventing Issues That Could Lead To Battery Failure..
Features
- Fits the Following Vehicles This battery current sensor fits for CHRYSLER 2015-2016 200/2011-2016 300.Fits for DODGE 2015-2016 CHALLENGER/2011-2016 CHARGER/2011-2018 JOURNEY/2015 VIPER.Fits for JEEP 2011-2018 WRANGLER/2014-2016 CHEROKEE.Fits for RAM 2013-2016 1500/2500/3500. Replace Part# OE: 4692269AI, 0199200180, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF.
- Battery Health Monitoring These sensors allow for real-time monitoring of the current flowing into and out of the battery. This information is crucial for assessing the health of the battery, detecting any anomalies, and preventing issues that could lead to battery failure.
- OEM Design The Battery Voltage Temperature Sensor is made of high-quality materials and advanced technology, providing excellent durability and reliability. Manufactured to original factory specifications. Can be tightly connected with the original cable to ensure installation and sensing stability.
- Easy to Install 1. Disconnect the negative cable and loosen the bolts with a bolt wrench. 2. Use a bolt wrench to remove the bolts on the other side of the wiring. 3. Remove the old battery sensor, replace with the new battery sensor, and reconnect the cables and bolts.
- Buy With Confidence We stand behind the quality of our product. this battery current sensor comes with 12 months warranty.Buy with confidence and enjoy the peace of mind that comes with knowing you have a high-quality product.If you have any questions, please send email to us, we will help you solve it perfectly.
- See more on Amazon...
Brand: YUANCHINB | Manufacturer: YUANCHINB
See On Amazon #8
Battery Sensor Compatible with 2011-2021 Chrysler Jeep Dodge Ram Replaces 4692269AI 4692269AG Battery Temperature Sensor
Asin: B09GLK4VHP | Ean: 0768564291455 | UPC: 768564291455
Solve The Battery System Problems Like Difficulty In Starting, High Idle Speed, Stop/Start System Not To Work..
Match The Fit And Function Of The Battery Sensor On Specified Vehicles..
The Sensor Measures The Current To And From The Battery, Also Monitor The Voltage, State Of Charge And Health Of The Battery Aging..
Replace Part Number: 4692269Ai, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af..
Features
- Battery Temperature Sensor Compatible with 2015 - 2016 Chrysler 200, 2011 - 2016 Chrysler 300, 2014 - 2016 Jeep Cherokee, 2011 - 2016 Jeep Wrangler, 2015 - 2016 Dodge Challenger, 2011 - 2017 Dodge Charger, 2011 - 2017 Dodge Journey, 2013 - 2015 Dodge Viper, 2013 - 2016 Dodge RAM 1500, 2014 - 2016 Dodge RAM 2500, 2013 - 2016 Dodge RAM 3500, 2013 - 2019 Fiat 500.
- Replace part number: 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF.
- Solve the battery system problems like difficulty in starting, high idle speed, Stop/Start system not to work.
- The sensor measures the current to and from the battery, also monitor the voltage, state of charge and health of the battery aging.
- Match the fit and function of the battery sensor on specified vehicles.
- See more on Amazon...
Brand: SONAKY | Manufacturer: SONAKY
See On Amazon #9
YZHIDIANF 4692269AI Battery Current Sensor Fit For:-Dodge Challenger Charger Journey For:-Ram 1500 For:-Jeep wrangler Cherokee For:-Chrysler 300 For:-Honda Civic For:-Acura RDX ILX, 2011-2017 (1 Pack)
Asin: B0C14C4H64 | Model: 4692269AI | PartNumber: 4692269AI
🔥【Premium Quality】This Battery Current Sensor Can Provide Long Service Life And Excellent Performance. Better Surface Treatment And Circuit Technology Than Most Similar Products. Replace The Old Battery Sensor, Solve Your Charging System Problem.
🔥【Customer Support】If You Have Any Questions About Models Or Any Dissatisfaction, Please Email Us And We Will Help You Solve It Perfectly.
🔥【Easy To Install】1. Disconnect The Negative Cable And Loosen The Bolt With A Bolt Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With A Bolt Wrench 3. Remove The Old Battery Sensor, Replace It With A New One, And Reconnect The Cables And Bolts. You Can Finish It In 5 Minutes.
🔥【Oem Number】4692269Ai, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af. Please Use "Amazon Confirmed Fit" Above To Verify Fitment Before Purchasing.
Features
- Fitment Compatible with For:-Acura ILX 2013-2014 RDX 2013-2017 // For:-Chrysler 200 2015-2016 300 2012-2016 // For:-Dodge Challenger 2015-2016 Charger 2011-2017 Journey 2011-2017 Viper 2015 // For:-Honda Civic 2012-2015 // For:-Ram 1500 2014-2016 // 2500 2014-2016 // 3500 2015-2016 // For:-Jeep Cherokee 2014-2016 Wrangler 2011-2017
- OEM Number 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF. Please use amazon confirmed fit above to verify fitment before purchasing
- Premium Quality This Battery Current Sensor can provide long service life and excellent performance. Better surface treatment and circuit technology than most similar products. Replace the old battery sensor, solve your charging system problem
- Easy to Install 1. Disconnect the negative cable and loosen the bolt with a bolt wrench. 2. Remove the bolt on the other side of the wiring with a bolt wrench 3. Remove the old battery sensor, replace it with a new one, and reconnect the cables and bolts. You can finish it in 5 minutes
- Customer Support If you have any questions about models or any dissatisfaction, please email us and we will help you solve it perfectly
- See more on Amazon...
Brand: YZHIDIANF | Manufacturer: YZHIDIANF
See On Amazon #10
Battery Current Sensor Battery Voltage Temperature Sensor for Chrysler 200 300 Wrangler Cherokee Dodge Challenger Journey Honda Civic CR-V Replace 38920-TR0-A02 38920-TR0-A01 4692269AI
Asin: B08BL8PKYP | Model: kytuacel | PartNumber: kytuacel
Reference Oe Part Number-Oem Part No: 4692269Ai.Interchange Part Number:38920-Tr0-A02 (38920Tr0a02), 38920-Tr0-A01 (38920Tr0a01), 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af..
Easy To Install - 1. Disconnect The Negative Cable And Loosen The Bolt With A Wrench. 2. Use A Wrench To Remove The Bolts On The Other Side Of The Wiring 3. Remove The Old Battery Sensor 4. Replace The New Ones And Reconnect The Cables And Bolts. (Note. For 2012-2015 Honda Civic And Cr-V 2.4L, An Extra 13Mm Nut Is Required And Will Remain Energized During Installation. Our Sensor Range Bolt Is 8Mm Thicker Than The Original, So The Original Nut Is Required Replace With 13Mm Hex Nut And Tighten..
Fit These Vehicles-Fit For 2015 - 2016 Chrysler 200, 2011 - 2016 Chrysler 300 & Wrangler ,2014 - 2016 Cherokee,2015 - 2016 Dodge Challenger,2011 - 2017 Dodge Charger & Journey,2013 - 2015 Dodge Viper,2013 - 2016 Dodge Ram 1500/3500,2014 - 2016 Dodge Ram 2500,2013 - 2019 Fiat 500,2012 - 2015 Honda Civic & Cr-V 2.4L.
Replacement Battery Current Sensor -The Battery Current Sensor Monitors The Flow Of Currents Into And Out Of A Battery.Often, It Clamps Onto The Negative Battery Cable To Measure The Flow, And Sends Signals To The Body Control Module (Bcm) Or Powertrain Control Module (Pcm).You Can Solve Your Charging System Problem Easily And Back To The Road By Replacing The Old Battery Sensor.
Features
- Hign Quality & Hign Performance-Manufactured from high quality materials ,and better surface treatment and circuit technology than most similar products,connected tightly with the original cables .This Battery Current Sensor can provide long service life and excellent performance, meets or exceeds OEM standards and very stable, 100% tested before shipping.Not easily broken more durable.
- Replacement Battery Current Sensor -The battery current sensor monitors the flow of currents into and out of a battery.Often, it clamps onto the negative battery cable to measure the flow, and sends signals to the body control module (BCM) or powertrain control module (PCM).You can solve your charging system problem easily and back to the road by replacing the old battery sensor
- Reference OE Part Number-OEM Part No: 4692269AI.Interchange part number:38920-TR0-A02 (38920TR0A02), 38920-TR0-A01 (38920TR0A01), 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF.
- Fit These Vehicles-fit for 2015 - 2016 Chrysler 200, 2011 - 2016 Chrysler 300 & Wrangler ,2014 - 2016 Cherokee,2015 - 2016 Dodge Challenger,2011 - 2017 Dodge Charger & Journey,2013 - 2015 Dodge Viper,2013 - 2016 Dodge RAM 1500/3500,2014 - 2016 Dodge RAM 2500,2013 - 2019 Fiat 500,2012 - 2015 Honda Civic & CR-V 2.4L
- Easy to install - 1. Disconnect the negative cable and loosen the bolt with a wrench. 2. Use a wrench to remove the bolts on the other side of the wiring 3. Remove the old battery sensor 4. Replace the new ones and reconnect the cables and bolts. (Note. For 2012-2015 Honda Civic and CR-V 2.4L, an extra 13mm nut is required and will remain energized during installation. Our sensor range bolt is 8mm thicker than the original, so the original nut is required Replace with 13mm hex nut and tighten.
- See more on Amazon...
Brand: kytuacel | Manufacturer: kytuacel
See On Amazon #11
4692269AI 38920-TR0-A02 4692269AH Battery Current Sensor Fits Dodge Journey Fiat 500 Jeep Wrangler Cherokee Chrysler Ram 1500 2500 3500 Hon-da Civic 2.4L, 4692269AG
Asin: B0CPT2LFH7
Fitment: For 2011-2020 Dodge Journey, For 2015-2016 Dodge Challenger, For 2011-2016 Dodge Charger.
Fitment: For 2015-2016 Chrysler 200, For 2011-2016 Chrysler 300, For 2013-2016 Ram 1500/2500/3500, For 2015 Dodge Viper.
Fitment: For 2013-2019 Fiat 500, For 2011-2018 Jeep Wrangler, For 2014-2016 Jeep Cherokee.
Replace Part Number: 38920-Tr0-A02, 38920Tr0a02, 38920-Tr0-A01, 38920Tr0a01.
Features
- Replace Part Number: 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF
- Replace Part Number: 38920-TR0-A02, 38920TR0A02, 38920-TR0-A01, 38920TR0A01
- Fitment: For 2011-2020 Dodge Journey, For 2015-2016 Dodge Challenger, For 2011-2016 Dodge Charger
- Fitment: For 2013-2019 Fiat 500, For 2011-2018 Jeep Wrangler, For 2014-2016 Jeep Cherokee
- Fitment: For 2015-2016 Chrysler 200, For 2011-2016 Chrysler 300, For 2013-2016 Ram 1500/2500/3500, For 2015 Dodge Viper
- See more on Amazon...
Brand: Terisnds | Manufacturer: Terisnds
See On Amazon #12
4692269AI Battery Current Sensor Fit for Jeep Chrysler Dodge Fiat & Honda Civic CR-V 2.4L 2012-2015, Battery Voltage Temperature Sensor Replacement Part, Replaces# 38920-TR0-A02
Asin: B0BWR5H116
Replace Part Numbers - Replace Oe#38920-Tr0-A02,38920-Tr0-A01,38920Tr0a02, 38920Tr0a01, 4692269Ai, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af. Please Check The Part Numbers Whether It Suits Your Vehicle Before Purchasing..
Buy With Confidence - All Products Have Been 100% Tested Before Delivery. Please Properly Verify The Year/Make/Model Before Purchasing This Product. If You Have Any Problem With Our Battery Current Sensor For Chrysler 300, Feel Free To Contact Us, We Will Sort Things Out Together..
Oem Design & Direct Fit - Quality Materials & Advanced Technology Used, Meets Or Exceeds Oem Standards. Even Though This Is Not A Genuine Dodge Battery Current Sensor, But It Works Even Better And Lasts Longer. Save Yourself Times And Money By Replacing Battery Current Sensor On Your Dodge Challenger Yourself..
Compatible With Following Vehicles - Fit For Jeep Cherokee Wrangler, Chrysler 200 300, Dodge Challenger Charger Journey Viper ,Ram 1500/2500/3500, Fiat 500, Honda Civic & Cr-V 2.4L 2012-2015. Please Check The Fitment In The Product Description Below..
Features
- BATTERY CURRENT SENSOR - This Battery Current Sensor can be connected tightly with the original cables, to ensure the stability of installation and sensing.It's time to replace the old battery sensor, solve your charging system problem and back to the road.
- COMPATIBLE WITH FOLLOWING VEHICLES - Fit for Jeep Cherokee Wrangler, Chrysler 200 300, Dodge Challenger Charger Journey Viper ,RAM 1500/2500/3500, Fiat 500, Honda Civic & CR-V 2.4L 2012-2015. Please check the fitment in the product description below.
- REPLACE PART NUMBERS - Replace OE#38920-TR0-A02,38920-TR0-A01,38920TR0A02, 38920TR0A01, 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF. Please check the part numbers whether it suits your vehicle before purchasing.
- OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine Dodge Battery Current Sensor, but it works even better and lasts longer. Save yourself times and money by replacing Battery Current Sensor on your Dodge Challenger yourself.
- BUY WITH CONFIDENCE - All products have been 100% tested before delivery. Please properly verify the Year/Make/Model before purchasing this product. If you have any problem with our Battery Current Sensor for Chrysler 300, feel free to contact us, we will sort things out together.
- See more on Amazon...
Brand: FEXON | Manufacturer: FGLK Auto Market
See On Amazon #13
X AUTOHAUX Battery Current Sensor 4692269AI Battery Voltage Temperature Sensor Replacement for Dodge for Jeep for Chrysler
Asin: B0B66SCVTV
Function:Battery Sensors Solve Your Low Battery Charging System Issues, Stop/Start Systems Not Working, Regulate Alternator Output, Monitor Shutdown Current..
Note:The Bolt Diameter Is 8Mm..
Material:Made Of Durable Material, Stable And Have A Long Service Time.It Can Be Connected Tightly With The Original Cables, Ensuring The Stability Of Installation And Performance..
Replace Part Numer:4692269Ai,.Please Make Sure Your Car Model And Oe Number Before Purchasing..
Features
- Fitment:for Chrysler 200 2.4L L4 3.6L V6 2015-2016,for Chrysler 300 3.6L V6 3.6L V6 5.7L V8 2011-2016,for Dodge Journey 2.4L L4 2011-2020,for Dodge Challenger 3.6L V6 5.7L V8 6.2L V8 6.4L V8 2015-2016,for Dodge Charger 3.6L V6 5.7L V8 6.2L V8 6.4L V8 2011-2016,for Jeep Wrangler JK 3.6L V6 2018,for Jeep Wrangler 3.6L V6 2011-2017,for Jeep Cherokee 2.4L L4 3.2L V6 2014-2016,for Ram 1500 3.0L V6 3.6L V6 5.7L V8 2013-2016,for Ram 2500 5.7L V8 5.7L V8 6.4L V8 2013-2016,for Ram 3500 2013-2016
- Replace Part Numer:4692269AI,.Please make sure your car model and OE number before purchasing.
- Function:Battery sensors solve your low battery charging system issues, stop/start systems not working, regulate alternator output, monitor shutdown current.
- Material:Made of durable material, stable and have a long service time.It can be connected tightly with the original cables, ensuring the stability of installation and performance.
- Note:The bolt diameter is 8mm.
- See more on Amazon...
Brand: X AUTOHAUX | Manufacturer: X AUTOHAUX
See On Amazon #14
4692269AI Battery Current Sensor Compatible with Dodge Journey Charger Chrysler 200 300 Jeep Wrangler Cherokee Ram 1500 2500 3500 Battery Temperature Voltage Sensor Replaces# 4692269AG
Asin: B0CYBRHRWY | Model: ES-4692269AI | PartNumber: ES-4692269AI
High Quality: This Battery Temperature Sensor Manufactured From High Quality Materials And Designed With Precision To Ensure The Accuracy Of Measuring Battery Status.Manufactured To Original Factory Specifications And Meets Or Exceeds Oem Standards..
Customer Service: Our Battery Sensor Comes With A One-Year Manufacturer Warranty. If You Have Any Question, Please Feel Free To Contact Us. We Are Committed To Delivering Better Products And Services For Every Customer.
Function: The Dodge Battery Current Sensorcan Detect Abnormalities Such As Overcharging, Over-Discharging, Short Circuits, And Thermal Runaway, Triggering Protective Measures To Prevent Damage To The Battery And Surrounding Equipment..
Replace Part Number: 4692269Ai, 0199200180, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af. Please Check Our Photos And Make Sure The Part Shown Looks Identical To Your Original One.
Features
- Fitment: Battery current sensor compatible with Chrysler 2015 - 2016 200, 2011 - 2016 300; Compatible with Jeep 2011 - 2018 Wrangler, 2014 - 2016 Cherokee; Compatible with Dodge 2015 - 2016 Challenger, 2011 - 2016 Charger , 2011 - 2018 Journey, 2015 Viper; Compatible with Ram 2013 - 2016 1500, 2013 - 2016 2500, 2013 - 2016 3500
- Replace Part Number: 4692269AI, 0199200180, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF. Please check our photos and make sure the part shown looks identical to your original one
- High quality: This battery temperature sensor manufactured from high quality materials and designed with precision to ensure the accuracy of measuring battery status.Manufactured to original factory specifications and meets or exceeds OEM standards.
- Function: The dodge battery current sensorcan detect abnormalities such as overcharging, over-discharging, short circuits, and thermal runaway, triggering protective measures to prevent damage to the battery and surrounding equipment.
- Customer Service: Our battery sensor comes with a one-year manufacturer warranty. If you have any question, please feel free to contact us. We are committed to delivering better products and services for every customer
- See more on Amazon...
Brand: E-Shin | Manufacturer: E-Shin
See On Amazon #15
4692269AI Battery Current Sensor Compatible with Honda Civic CR-V Jeep Chrysler Dodge Fiat 2.4L 2012-2015, Battery Voltage Temperature Sensor Replace# 4692269AI 38920-TR0-A02
Asin: B0BN84DSBN | Model: 4692269AI 38920-TR0-A02 | PartNumber: 4692269AI 38920-TR0-A02 | Ean: 0760627579807 | UPC: 760627579807
【High Quality Material】The 4692269Ai Battery Current Sensor Is Made Of High Quality Materials, Stable Performance,Meets Or Exceeds Oem Standards, 100% Tested Before Shipping..
【Satisfactory Service】We Are Committed To Providing Satisfactory Service. If You Have Any Questions Or Concerns About Our Product Within 30 Days Of Purchase And Use, Please Contact Us For The Best Possible Solution..
【Easy To Install】1. Disconnect The Negative Cable And Loosen The Bolt With A Bolt Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With A Bolt Wrench 3. Remove The Old Battery Sensor, Replace It With A New One, And Reconnect The Cables And Bolts..
【Replace Part Number】Battery Current Sensor Replace Part Number: 4692269Ai,4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af 38920-Tr0-A02 (38920Tr0a02) 38920-Tr0-A01 (38920Tr0a01)..
Features
- Compatibility model 4692269AI battery current sensor compatible with Honda CR-V 2.4L 2012-2015,compatible with Honda Civic 2.4L 2012-2015, compatible with Dodge Journey 2011-2020,Fiat 500 2013-2019,compatible with Jeep Wrangler 2011-2018,compatible with Chrysler 200 2015-2016, compatible with Chrysler 300 2011-2016,compatible with Dodge Challenger 2015-2016,compatible with Dodge Charger 2011-2016,compatible with Jeep Cherokee 2014-2016,Ram 1500/2500/3500 2013-2016.
- Replace part number Battery Current Sensor Replace part number: 4692269AI,4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF 38920-TR0-A02 (38920TR0A02) 38920-TR0-A01 (38920TR0A01).
- High Quality Material The 4692269AI battery current sensor is made of high quality materials, stable performance,meets or exceeds OEM standards, 100% tested before shipping.
- Easy to install 1. Disconnect the negative cable and loosen the bolt with a bolt wrench. 2. Remove the bolt on the other side of the wiring with a bolt wrench 3. Remove the old battery sensor, replace it with a new one, and reconnect the cables and bolts.
- Satisfactory Service We are committed to providing satisfactory service. If you have any questions or concerns about our product within 30 days of purchase and use, please contact us for the best possible solution.
- See more on Amazon...
Brand: KAKO | Manufacturer: OEN
See On Amazon #16
YZHIDIANF Upgraded 4692269AI Battery Current Sensor for:-Dodge Journey Challenger Charger for:-Jeep Cherokee Wrangler for:-Chrysler 200 300 for:-Honda Civic for:-Ram 1500 2500 3500 for:-Acura (1pc)
Asin: B0CJ95TVVQ | Model: 🏆4692269AI | PartNumber: 🏆4692269AI
🏆【Durable And Reliable】Manufactured With High-Quality Materials And Advanced Technology, The Sensor Has Excellent Durability And Reliability, And Can Work Normally In Various Extreme Environments And Vehicle Usage Conditions, Ensuring Long-Term Stable Performance.
🏆【Customer Support】If You Have Any Questions About Models Or Any Dissatisfaction, Please Email Us And We Will Help You Solve It Perfectly.
🏆【Easy To Install】1. Disconnect The Negative Cable And Loosen The Aolt With A Bolt Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With A Bolt Wrench 3. Remove The Old Battery Sensor, Replace It With A New One, And Reconnect The Cables And Bolts. You Can Finish It In 5 Minutes.
🏆【Real-Time Monitoring】This Automotive Battery Current Sensor Can Monitor The Status Of The Vehicle Battery In Real Time, Enabling Users To Accurately Monitor And Analyze The Current In The Battery System, Helping Drivers Accurately Understand The Condition Of The Battery, And Improving Driving Safety And Battery Life.
Features
- Fitments Battery Current Sensor Fits For:-Jeep 2014-2016 Cherokee//2011-2017 wrangler, For:-Chrysler 2015-2016 200//2012-2016 300, For:-Dodge 2015-2016 challenger//2011-2017 charger//2011-2017 journey//2015 viper, For:-Honda 2012-2015 civic, For:-Ram 2014-2016 1500//2014-2016 2500//2015-2016 3500, For:-Acura 2013-2014 ilx//2013-2017 rdx
- Real-Time Monitoring This Automotive Battery Current Sensor Can Monitor The Status Of The Vehicle Battery In Real Time, Enabling Users To Accurately Monitor And Analyze The Current In The Battery System, Helping Drivers Accurately Understand The Condition Of The Battery, And Improving Driving Safety And Battery Life
- Durable and Reliable Manufactured With High-Quality Materials And Advanced Technology, The Sensor Has Excellent Durability And Reliability, And Can Work Normally In Various Extreme Environments And Vehicle Usage Conditions, Ensuring Long-Term Stable Performance
- Easy to Install 1. Disconnect The Negative Cable And Loosen The Aolt With a Bolt Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With a Bolt Wrench 3. Remove The Old Battery Sensor, Replace It With a New One, And Reconnect The Cables And Bolts. You Can Finish It In 5 Minutes
- Customer Support If You Have Any Questions About Models Or Any Dissatisfaction, Please Email Us And We Will Help You Solve It Perfectly
- See more on Amazon...
Brand: YZHIDIANF | Manufacturer: YZHIDIANF
Dimensions: 0.39 x 0.39 x 0.39 inches
Warranty: 🏆2-Year Factory Warranty
See On Amazon #17
WATERWICH Battery Current Sensor, Battery Voltage Temperature Sensor Compatible with Dodge Journey Fiat Jeep Chrysler Ram 1500 2500 3500 Honda Civic/CR-V 2.4L Replacement for 4692269AI 38920-TR0-A02
Asin: B0C49T6S4B | Model: WATERWICH | PartNumber: WATERWICH
【Product Material】Battery Current Sensor Is Made Of Quality Abs And Metal Materials, Which Is Durable, Stable And Has A Long Service Life.Surface Treatment Applied To The Metal Parts Of The Sensor To Prevent Oxidation And Rust In Different Environments, Which Can Lead To Poor Contact Of The Sensor..
【Convenient Installation】During Installation, You Need To Disconnect The Negative Cable First, Then Remove The Fixed Bolt, Replace The Old Sensor With A New Sensor, Then Tighten The Fixed Bolt With A Wrench And Reconnect The Cable, And The Installation Is Completed. The Steps Are Simple And Easy To Operate, And It Does Not Take Too Much Time..
【Note】The Bolt Diameter Of Battery Voltage Temperature Sensor Is 8Mm, And The 13Mm Nut Needs To Be Replaced When Installing Honda Series Models.To Avoid Re Matching The Sensor During Installation, It Needs To Be Installed With Power On..
【Applicable Models】Compatible With Dodge Journey 2011-2017, Fiat 500 2013-2019, Jeep Wrangler 2011-2016, Chrysler 200 2015-2016, Chrysler 300 2011-2016, Dodge Challenger 2015-2016, Dodge Charger 2011-2016, Jeep Cherokee 2014-2016, Ram 1500/2500/3500 2013-2016, Dodge Viper 2013-2015, Honda Civic 2012-2015, Honda Cr-V 2.4L 2012-2015..
Features
- Replacement Part Numbers Replacement for 4692269AI 38920-TR0-A02 4692269AH 4692269AG 04692269AG 04692269AD 04692269AE 04692269AF, Please check the OE number carefully before buying. The products have been strictly tested before leaving the warehouse, meeting or exceeding OEM standards.
- Applicable models Compatible with Dodge Journey 2011-2017, Fiat 500 2013-2019, Jeep Wrangler 2011-2016, Chrysler 200 2015-2016, Chrysler 300 2011-2016, Dodge Challenger 2015-2016, Dodge Charger 2011-2016, Jeep Cherokee 2014-2016, Ram 1500/2500/3500 2013-2016, Dodge Viper 2013-2015, Honda Civic 2012-2015, Honda CR-V 2.4L 2012-2015.
- Product Material Battery Current Sensor is made of quality ABS and metal materials, which is durable, stable and has a long service life.Surface treatment applied to the metal parts of the sensor to prevent oxidation and rust in different environments, which can lead to poor contact of the sensor.
- Note The bolt diameter of battery voltage temperature sensor is 8mm, and the 13mm nut needs to be replaced when installing Honda series models.To avoid re matching the sensor during installation, it needs to be installed with power on.
- Convenient Installation During installation, you need to disconnect the negative cable first, then remove the fixed bolt, replace the old sensor with a new sensor, then tighten the fixed bolt with a wrench and reconnect the cable, and the installation is completed. The steps are simple and easy to operate, and it does not take too much time.
- See more on Amazon...
Brand: WATERWICH | Manufacturer: WATERWICH
See On Amazon #18
Battery Current Sensor,Automotive Replacement Battery Current Voltage Temperature Sensor for Dodge Journey 1500 2500 3500
Asin: B0B756DJ31
Function: The Current Sensor Can Detect The Information Of The Current And Convert The Information Into An Electrical Signal Output That Meets Certain Standards..
Stringent Manufacturing: Professional Manufacturing, Exquisite Workmanship, Stable Performance And High Reliability..
High Performance: This Battery Current Sensor Provides Long Life And Excellent Performance. Replace The Old Battery Sensor And Fix Your Charging System Problem..
Replacing Oe Numbers For Reference: 4692269Ai, 4692269Ag, 4692269Ah. According To The Original Factory Specifications, Perfectly Matching The Corresponding Models..
Features
- Fitment: Battery current sensor is replacement for Jeep Cherokee; replacement for Jeep Wrangler; replacement for Chrysler 200 300; replacement for Dodge Journey 1500 2500 3500 etc.
- Replacing OE Numbers for Reference: 4692269AI, 4692269AG, 4692269AH. According to the original factory specifications, perfectly matching the corresponding models.
- Function: The current sensor can detect the information of the current and convert the information into an electrical signal output that meets certain standards.
- High Performance: This battery current sensor provides long life and excellent performance. Replace the old battery sensor and fix your charging system problem.
- Stringent Manufacturing: Professional manufacturing, exquisite workmanship, stable performance and high reliability.
- See more on Amazon...
Brand: Aramox | Manufacturer: Aramox
See On Amazon #19
DICMIC Battery Current Sensor, Battery Voltage Temperature Sensor Replacement Part Compatible with 2011-2016 Chrysler 300 Jeep Wrangler 2012-2015 Honda Civic CR-V Replace# 4692269AI, 38920-TR0-A02
Asin: B0C36C7Q6Q
[Hiqh Quality] This Battery Current Sensor Can Provide Long Service Life And Excellent Performance. Better Surface Treatment And Circuit Technology Than Most Similar Products. Replace The Old Battery Sensor, Solve Your Charging System Problem..
[Notice] For Any Reason, If You Are Not Satisfied With Your Purchase, Contact Us Directly..
[Easy To Install] Reliable Quality, Easy To Install..
[Compatible With] Replacement For 2015-2016 Chrysler 200, For 2011-2016 Chrysler 300, For 2011-2016 Jeep Wrangler, For 2014-2016 Jeep Cherokee, For 2015-2016 Dodge Challenger, For 2011-2017 Dodge Charger, For 2011-2017 Dodge Journey, For 2013-2015 Dodge Viper, For 2013-2016 Dodge Ram 1500, For 2013-2016 Dodge Ram 3500, For 2014-2016 Dodge Ram 2500, For 2013-2019 Fiat 500, For 2012-2015 Honda Civic, For 2012-2015 Honda Cr-V 2.4L..
Features
- [REPLACE PART NUMBER] 4692269AI, 38920-TR0-A02, 38920TR0A02, 38920-TR0-A01, 38920TR0A01, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF.
- [COMPATIBLE WITH] Replacement for 2015-2016 Chrysler 200, for 2011-2016 Chrysler 300, for 2011-2016 Jeep Wrangler, for 2014-2016 Jeep Cherokee, for 2015-2016 Dodge Challenger, for 2011-2017 Dodge Charger, for 2011-2017 Dodge Journey, for 2013-2015 Dodge Viper, for 2013-2016 Dodge RAM 1500, for 2013-2016 Dodge RAM 3500, for 2014-2016 Dodge RAM 2500, for 2013-2019 Fiat 500, for 2012-2015 Honda Civic, for 2012-2015 Honda CR-V 2.4L.
- [HIQH QUALITY] This battery current sensor can provide long service life and excellent performance. Better surface treatment and circuit technology than most similar products. Replace the old battery sensor, solve your charging system problem.
- [EASY TO INSTALL] Reliable quality, easy to install.
- [NOTICE] For any reason, if you are not satisfied with your purchase, contact us directly.
- See more on Amazon...
Brand: DICMIC | Manufacturer: DICMIC
Dimensions: 1.97 x 5.91 x 3.94 Inches
See On Amazon #20
IZYSS Battery Voltage Temperature Current Sensor Replace 38920-TR0-A02
Asin: B0CRKKM1W5 | Ean: 0789597978014 | UPC: 789597978014
Oem Design: This Battery Current Sensor Is Manufactured To Original Factory Specifications. It Can Be Tightly Connected To The Original Cable To Ensure Installation And Sensing Stability.
Installation: 1. Disconnect The Negative Cable And Loosen The Bolt With A Bolt Wrench. 2. Remove The Bolt On The Other Side Of The Wiring With A Bolt Wrench. 3. Remove The Old Battery Sensor, Replace With A New One, And Reconnect The Cables And Bolts. 5 Minutes Or Less. Saves Money And Labor! ( Note: For Honda Models, An Additional 13Mm Nut Is Required And Remains Energized During Installation).
Notice: 3-Year Warranty. Please Enter Your Vehicle Information In The Top Left Corner Of The Listing To Make Sure It Fits Your Car Before You Purchase. If You Have Any Questions Or Dissatisfaction About The Product Model And Suitable Model, Please Send Email To Us, We Will Help You Solve It Perfectly.
Replacement: 4692269Ai, 4692269Ag, 4692269Ah, 04692269Ag, 04692269Ad, 04692269Ae, 04692269Af, 38920-Tr0-A02, 38920Tr0a02, 38920-Tr0-A01, 38920Tr0a01.
Features
- Fitment: For Jeep Cherokee/Wrangler, Chrysler 200/300, Dodge Challenger Charger Journey Viper RAM 1500/2500/3500, Fiat 500, Honda Civic CR-V. For more specific and detailed model matching, please refer to the details
- Replacement: 4692269AI, 4692269AG, 4692269AH, 04692269AG, 04692269AD, 04692269AE, 04692269AF, 38920-TR0-A02, 38920TR0A02, 38920-TR0-A01, 38920TR0A01
- OEM DESIGN: This battery current sensor is manufactured to original factory specifications. It can be tightly connected to the original cable to ensure installation and sensing stability
- Notice: 3-Year Warranty. Please enter your vehicle information in the top left corner of the listing to make sure it fits your car before you purchase. If you have any questions or dissatisfaction about the product model and suitable model, please send email to us, we will help you solve it perfectly
- Installation: 1. Disconnect the negative cable and loosen the bolt with a bolt wrench. 2. Remove the bolt on the other side of the wiring with a bolt wrench. 3. Remove the old battery sensor, replace with a new one, and reconnect the cables and bolts. 5 minutes or less. Saves money and labor! ( NOTE: For Honda models, an additional 13mm nut is required and remains energized during installation)
- See more on Amazon...
Brand: IZYSS | Manufacturer: IZYSS
See On Amazon
Looking For Something Else?
Search