DIYmall 4PCS 868MHz 915MHz Lora GSM Antenna IPX IPEX 1.13 UF.L 2DBi Gain 7CM Lora32 Antenna for LORA32U4II ESP32 Lora Board IoT
Asin: B0CRKQSNRW
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Support Lora32u4 Ii Esp32 Lora Board 868Mhz 915Mhz.
What You Will Get: 4 X 868Mhz 915Mhz Gsm Ipx Ipex 1.13 Antenna.
Length: Total 7Cm.
Frequency: 824-960Mhz.
Features
- Perfectly for development board which with ipex/ufl socket
- Frequency: 824-960MHz
- Support lora32u4 II esp32 lora board 868MHz 915MHz
- Length: Total 7CM
- What you will get: 4 X 868MHz 915MHz GSM IPX IPEX 1.13 Antenna
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon Similar To DIYmall 4PCS 868MHz 915MHz Lora
#1
Gowoops SX1276 LoRa Radio Wireless 862-930MHz 915MHz UART Serial Module Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer
Asin: B07G7RZLTW | Model: 8541545860 | PartNumber: 8541545860 | Ean: 0705586406108 | UPC: 705586406108
✔ Fec (Forward Error Correction) -- High Coding Efficiency & Good Correction Performance.
✔ Fixed Transmission -- Each Module Can Connect With Other Module In Different Addresses And Channels To Achieve Application Like Networking, Repeating, Etc..
✔ Transparent Transmission (Point To Point) -- Data Sending Is Via Transparent Transmission, The Module Comes With Address.
✔ Wor (Low Power Consumption) -- Work On Radio, Applicable For Battery Powered Applications.
Features
- LoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK
- WOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications
- FEC (Forward Error Correction) -- High coding efficiency & good correction performance
- Transparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address
- Fixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.
- See more on Amazon...
Brand: Gowoops | Manufacturer: Gowoops
Dimensions: 6.59 x 2.60 x 0.71 inches
See On Amazon #2
DIYmall 10PCS 868MHz 915MHz Lora GSM Antenna IPX IPEX 1.13 UF.L 2DBi Gain 8CM for LORA32U4II ESP32 Lora Board
Asin: B0B4K1KSM5
Support Lora32u4 Ii Esp32 Lora Board 868Mhz 915Mhz.
What You Will Get: 10 X 868Mhz 915Mhz Gsm Ipx Ipex 1.13 Antenna.
Length: Total 8Cm.
Frequency: 824-960Mhz.
Features
- Perfectly for development board which with ipex/ufl socket
- Frequency: 824-960MHz
- Support lora32u4 II esp32 lora board 868MHz 915MHz
- Length: Total 8CM
- What you will get: 10 X 868MHz 915MHz GSM IPX IPEX 1.13 Antenna
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon #3
Geekstory 915MHz LoRa Antenna IPX IPEX 1.13 UF.L Antenna Built-in 2DBi 8CM for OLED LoRa Board ESP32 LORA32U4II LoRa GPS Pack of 5
Asin: B0BY2CS5VB
Connector Type: The Antenna Is Equipped With A Miniature Ipx Ipex 1.13 Connector, This Connector Provides A Secure And Reliable Connection Between The Antenna And The Device..
Applications: The Lora Antenna Is Commonly Used In Different Version Of Lora32u4 Ii Lora Board 915Mhz; Lora Esp32 Oled Board. Support On-Board Antenna Interface Of Htcc-Ab02s Lora Gps Board 915 Mhz..
The Built-In 2Dbi Antenna Gain Will Provide Better Signal Reception And Transmission Capabilities Compared To A Lower Gain Antenna..
Antenna Type: The Ipex 1.13 Uf.L Antenna Is A Small, Omnidirectional Antenna That Is Built With A Compact Size Of 8Cm. It Is Designed To Be Used In Portable Devices That Require A Small Antenna To Transmit And Receive Data..
Features
- Frequency range: The antennas are operate in the frequency range of 868-915MHz, making them suitable for use in wireless communication systems that operate within this range.
- Antenna type: The IPEX 1.13 UF.L antenna is a small, omnidirectional antenna that is built with a compact size of 8CM. It is designed to be used in portable devices that require a small antenna to transmit and receive data.
- Connector type: The antenna is equipped with a miniature IPX IPEX 1.13 connector, This connector provides a secure and reliable connection between the antenna and the device.
- The built-in 2DBi antenna gain will provide better signal reception and transmission capabilities compared to a lower gain antenna.
- Applications: The Lora antenna is commonly used in different version of lora32u4 II lora board 915mhz; lora esp32 oled board. Support on-board antenna interface of HTCC-AB02S LoRa GPS board 915 mhz.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #4
DIYmalls 915 LoRa GPS Module ASR6502 HTCC-AB02S Development Board SX1262 0.96 OLED + 915MHz LoRa Antenna IPEX + 1.25mm 2P Connector for Arduino LoRaWAN Gateway (Pack of 2)
Asin: B09SV5F1CM
-You Need To Use One Asr6502 Lora Module 915 Mhz To Send, And The Other To Receive..
-You Will Receive 2Pcs Lora 915Mhz Board, 2Pcs Lora Antenna 915Mhz, And 2Pcs 1.25Mm 2Pin Cable..
-0.96 Oled Is Mounted On 915 Lora Board Via 4 Screws, So It Is Removable But Pls Be Careful To Avoid Damage..
-915 Mhz Htcc-Ab02s Lora Board Comes Not Soldered, So You Need To Assemble It Manually..
Features
- -915MHz lora gps is fully compatible with arduino, windows, linux, and integrated lorawan protocol for secondary development.
- -915 mhz htcc-ab02s lora board comes NOT soldered, so you need to assemble it manually.
- -You need to use one asr6502 lora module 915 mhz to send, and the other to receive.
- -0.96 oled is mounted on 915 lora board via 4 screws, so it is removable but pls be careful to avoid damage.
- -You will receive 2pcs lora 915mhz board, 2pcs lora antenna 915mhz, and 2pcs 1.25mm 2pin cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #5
Geekstory 4PCS LoRa Antenna 915MHz 2DBI with U.FL IPEX to SMA Connector for Lora Board ESP32 Lora32u4 II WiFi Lora32 15cm
Asin: B0D28WWQFX | Model: 915mhz | PartNumber: 915mhz
915Mhz Lora Antenna Is Good For Lora End Devices For The 915Mhz Band. Widely Used With 915Mhz Cubecell Board, Htcc-Ab02s Lora Gps, Lora32u4 Ii Etc; And In Academic Research Projects That Require Wireless Communication.
If You Have Any Questions About This Product, Please Click ''Geekstory'' To Em-Ail Us..
Connector Type: The Lora Antenna U.Fl Ipex To Sma Connector Is A Cable Assembly That Includes A Lora Antenna With A U.Fl Ipex Connector On One End And An Sma Connector On The Other End. The U.Fl Ipex Connector Is Used To Connect The Antenna To A Wireless Module, And The Sma Connector Is Used To Connect The Cable Assembly To An Rf Device.
Connector Type: Ipex. Standing Wave Ratio: <= 1.5; Gain: 2Dbi; Maximum Power: 10W; Input Impedance: 50Ω.
Features
- You will get 4 PCS Lora antenna
- Connector type: IPEX. Standing wave ratio: <= 1.5; Gain: 2dBi; Maximum power: 10W; Input impedance: 50
- 915MHz lora antenna is good for LoRa end devices for the 915mhz band. widely used with 915mhz cubecell board, htcc-ab02s lora gps, LoRa32u4 II etc; and in academic research projects that require wireless communication
- Connector Type: The LoRa Antenna U.FL IPEX to SMA Connector is a cable assembly that includes a LoRa antenna with a U.FL IPEX connector on one end and an SMA connector on the other end. The U.FL IPEX connector is used to connect the antenna to a wireless module, and the SMA connector is used to connect the cable assembly to an RF device
- If you have any questions about this product, please click ''Geekstory'' to em-ail us.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #6
DIYmall LoRa32u4 II Lora Development Board Module 915MHZ LiPo SX1276 HPD13 with Antenna for Arduino
Asin: B075MZ11DS | Model: DIY0051N+FZ2862 | PartNumber: DIY0051N+FZ2862
Built In 100Ma Lipoly Charger With Charging Status Indicator Led, Interface Is 2.0Mm Male.
What You Will Get Is : 1 X Lora32u4 Ii Lora Module, 1 X Ipex 1.13 Uf.L Antenna, 1 X Jst-Ph2.0Mm-2P Plug Cable.
915Mhz Gsm Ipx Ipex 1.13 Uf.L Antenna Built-In 2Dbi, 8Cm,Standing Wave Ratio / S.W.R.≤2.0,Impedance: 50Ω,Max Input Power 50W.
3.3V Regulator With 500Ma Peak Current Output.
Features
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male
- 915MHz GSM IPX IPEX 1.13 UF.L Antenna Built-in 2DBi, 8cm,Standing wave ratio / S.W.R. 2.0,Impedance: 50 ,Max Input power 50W
- What you will get is : 1 X LoRa32u4 II Lora module, 1 X IPEX 1.13 UF.L Antenna, 1 X JST-PH2.0MM-2P plug cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon #7
LoRa32u4 II Lora Development Board Module LiPo SX1276 HPD13 915MHZ with Antenna for Arduino DIYmall
Asin: B075TXGNGR | Model: DIY0051N+FZ2865 | PartNumber: DIY0051N+FZ2865
3.3V Regulator With 500Ma Peak Current Output.
What You Will Get : 1 X Lora32u4 Ii 915Mhz Board + 1 X Antenna + 1 X Jst-Ph2.0Mm-2P Cable.
Built In 100Ma Lipoly Charger With Charging Status Indicator Led, Interface Is 2.0Mm Male.
Atmega32u4 @ 8Mhz With 3.3V Logic/Power.
Features
- Document link https://github(DOT)com/BSFrance/BSFrance-avr
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male
- What you will get : 1 X LORA32U4 II 915MHZ Board + 1 X Antenna + 1 X JST-PH2.0MM-2P Cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon #8
Lubeby Smart RF Transceiver 915MHz SX1276 LoRa Module Built-in Temperature Sensor LoRa1276 Networking Transmitters (2 PCS)
Asin: B0B3XDCVKR | Model: LORA1276-915 | PartNumber: LORA1276-915 | Ean: 0774980937426 | UPC: 774980937426
Multi-Signal Won't Affect Each Other Even In Crowd Frequency Environment; It Comes With Strong Anti-Interference Performance..
Lora1276 Comply With Lead-Free Craft In Production And Testing And Meets Rohs And Reach Standards..
This Module Antenna Switch Is Integrated And Controlled By The Chip. Its Compact Size Is Matched With An Output Power Of 100Mw. It Can Be Widely Used In Wireless Meter Reading, Remote Industrial Control And Other Industries..
Its Communication Distance And Receiving Sensitivity Are Much Better Than The Current Fsk And Gfsk Modulation..
Features
- The LoRa module LoRa1276 integrates Semtech RF transceiver chip SX1276, which adopts LoRa Spread Spectrum modulation frequency hopping technique.
- Its communication distance and receiving sensitivity are much better than the current FSK and GFSK modulation.
- Multi-signal won't affect each other even in crowd frequency environment; it comes with strong anti-interference performance.
- This module antenna switch is integrated and controlled by the chip. Its compact size is matched with an output power of 100mw. It can be widely used in wireless meter reading, remote industrial control and other industries.
- LoRa1276 comply with lead-free craft in production and testing and meets RoHS and Reach standards.
- See more on Amazon...
Brand: Lubeby Smart | Manufacturer: NiceRF
Dimensions: 0.10 x 0.68 x 0.67 inches
See On Amazon #9
868MHz 915MHz SX1262 Lora SPI Wireless Module E22-900M33S 2W Long Distance 16km PA+LNA Low Power Lora RF Transceiver
Asin: B0CZNHX91T
Power Is 2 W, Multi-Level Software Adjustable; Support Global License-Free Ism 868/915 Mhz Frequency Band; Supports Multiple Modulation Modes, Lora Tm /Gfsk ;Fifo Has Large Capacity And Supports 256Byte Data Cache ;.
Sf5 Spreading Factor Introduced To Support Dense Networks ; Supports 3.3 ~ 5.5V Power Supply, And Any Power Supply Greater Than 5 V Can Ensure The Best Performance; Industrial Grade Standard Design, Supports Long-Term Use At -40 ~ + 85 ℃; Optional Dual Antennas (Ipex/Stamp Hole) Facilitate User Secondary Development And Integration;.
Built-In Pa +Lna , Greatly Improving Communication Distance And Communication Stability; The Maximum Transmit Lora Tm Mode Supports Data Transmission Rates From 0.3 K To 62.5 Kbps ; Gfsk Mode Supports Data Transmission Rate Up To 300Kpbs ;Backwards Compatible With Sx1278/Sx1276 Series Rf Transceivers;.
The Sx1262 Module Has The Significant Advantages Of Lower Power Consumption, Faster Speed, And Longer Distance; Under Ideal Conditions, The Communication Distance Can Reach 16 Km;.
Features
- Application scenarios-Home security alarm and remote keyless entry;Smart home and industrial sensors, etc.;Wireless alarm security system ;Building automation solutions;Wireless industrial grade remote control;Advanced Meter Infrastructure (AMI );Automotive industry applications.
- The SX1262 module has the significant advantages of lower power consumption, faster speed, and longer distance; Under ideal conditions, the communication distance can reach 16 km;
- power is 2 W, multi-level software adjustable; Support global license-free ISM 868/915 MHz frequency band; Supports multiple modulation modes, LoRa TM /GFSK ;FIFO has large capacity and supports 256Byte data cache ;
- Built-in PA +LNA , greatly improving communication distance and communication stability; The maximum transmit LoRa TM mode supports data transmission rates from 0.3 k to 62.5 kbps ; GFSK mode supports data transmission rate up to 300kpbs ;Backwards compatible with SX1278/SX1276 series RF transceivers;
- SF5 spreading factor introduced to support dense networks ; Supports 3.3 ~ 5.5V power supply, and any power supply greater than 5 V can ensure the best performance; Industrial grade standard design, supports long-term use at -40 ~ + 85 ; Optional dual antennas (IPEX/stamp hole) facilitate user secondary development and integration;
- See more on Amazon...
Brand: EBYTE | Manufacturer: EBYTE
See On Amazon
Looking For Something Else?
Search