533 Solder Flux,No Clean Flux,Lead Free Soldering Flux,Electronics Liquid Flux,for BGA/Phone/SMT/IC/Chip Etc.Precision Electronic Repairing (10g)
Asin: B0CRYT18V2 | Model: 533 | PartNumber: 533
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Push Rod Design: The Push Rod Design Allows For Precise Control Of Solder Flux Release, Minimizing Waste During The Soldering Process..
Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell,Compliance With Rohs Standards.
High Rosin Concentration: The Flux Is Primarily Composed Of High-Concentration Rosin, Effortlessly Removing Oxidation From The Soldering Surface, Ensuring Solder Joint Stability And Reliability,It Is A Good Helper For Repairing And Soldering.
Scope Of Application Of Flux: 533 Flux Is For Precision Repair Soldering, Chip, Bga, Smd,Phone, Home Appliance Repairing,Etc..
Features
- Solder Flux Advantages: Lead free, halogen free, no corrosive, no conductive, excellent fluidity, and no need for cleaning after use.
- Scope of application of flux: 533 flux is for precision repair Soldering, Chip, BGA, SMD,Phone, Home Appliance Repairing,etc.
- Push Rod Design: The push Rod design allows for precise control of Solder Flux release, minimizing waste during the soldering process.
- High Rosin Concentration: The flux is primarily composed of high-concentration rosin, effortlessly removing oxidation from the soldering surface, ensuring solder joint stability and reliability,It is a good helper for repairing and soldering
- Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell,Compliance with RoHS Standards
- See more on Amazon...
Brand: KELLYSHUN | Manufacturer: KELLYSHUN
Dimensions: 0.70 x 3.70 x 1.20 inches
See On Amazon Similar To 533 Solder FluxNo Clean FluxLead
#1
Soldering Iron Tip Cleaner Kit, Windspeed Non-slip Brass Soldering Tip Cleaner Solder Flux Brass Tip Cleaning Brass With Holder, Solder Flux, Solder Wire 4pcs Copper Wire Ball, No Water Needed
Asin: B09BDWDPPL | Ean: 0789622669269 | UPC: 789622669269
◆【Efficient & Save Time】The Soldering Iron Tip Cleaner With Copper Wire Ball Cleaner Can Easily Reduce Oxide Accumulation And Cleans Better Than Conventional Sponges, Doesn’T Need Water, And Will Not Reduce The Tip’S Temperature, Making Working Efficient And Saving More Time. Besides, Please Do Not Take The Copper Wire Ball Out Of The Tin Can, Otherwise, The Molten Residual Solder May Splash..
◆【Solder Wire & Solder Flux】The Soldering Iron Tip Cleaner Comes With Solder Cleaning Wire And Solder Flux. The Tin Solder Wire Has Good Welding And Stable Performance, And Please Wear Gloves To Avoid Scalding When Replacing Welding Wire. The Solder Flux Has Less Residue, Safe To Use, And Has Low Volatility And Strong Insulation. When Using The Soldering Flux, Please Keep The Solder Head Upright..
Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.P65warnings.Ca.Gov..
◆【Ball Bell Design】The Soldering Iron Tip Cleaner Looks Like A Ball Bell, Hardened Solder Collects In The Bottom, The Holder Can Separate The Two Parts To Clean Tin Residual Easily, Tin Slag Will Not Splash On The Workbench And Keep A Clean Environment..
◆【High-Quality Material】The Soldering Iron Tip Cleaner Holder Is Made Of High-Quality Stainless Steel, And The Copper Wire Ball Is Made Of Brass Material, Smokeless, Non-Toxic, Sturdy, And Durable. At The Same Time, It Can Extend The Service Life Of The Soldering Iron Head And Improve Your Welding Ability..
Features
- Package Include The soldering iron tip cleaner package includes 1 holder, 4pcs copper wire ball cleaner, 1pcs 0.6mm solder cleaning wires, and 1pcs solder flux, a good helper to help you repair electronic equipment.
- High-Quality Material The soldering iron tip cleaner holder is made of high-quality stainless steel, and the copper wire ball is made of brass material, smokeless, non-toxic, sturdy, and durable. At the same time, it can extend the service life of the soldering iron head and improve your welding ability.
- Efficient & Save Time The soldering iron tip cleaner with copper wire ball cleaner can easily reduce oxide accumulation and cleans better than conventional sponges, doesn t need water, and will not reduce the tip s temperature, making working efficient and saving more time. Besides, please do not take the copper wire ball out of the tin can, otherwise, the molten residual solder may splash.
- Ball Bell Design The soldering iron tip cleaner looks like a ball bell, hardened solder collects in the bottom, the holder can separate the two parts to clean tin residual easily, tin slag will not splash on the workbench and keep a clean environment.
- Solder Wire & Solder Flux The soldering iron tip cleaner comes with solder cleaning wire and solder flux. The tin solder wire has good welding and stable performance, and please wear gloves to avoid scalding when replacing welding wire. The solder flux has less residue, safe to use, and has low volatility and strong insulation. When using the soldering flux, please keep the solder head upright.
- WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- See more on Amazon...
Brand: Windspeed | Manufacturer: Windspeed
See On Amazon #2
SRA TF5000 No Clean Tacky Flux - 10cc
Asin: B00JMUWS04 | Model: TF5000 | PartNumber: TF5000 | Ean: 0022099136378 | UPC: 022099136378
Low Pleasant Odor.
Will Not Run All Over Pcb When Applied.
This Flux Leaves Very Shiny Solder Joints And Is Non-Corrosive, Non Conductive.
Features
- No Clean Tacky Flux that is lower in odor and tackier than anything else on the market
- This flux leaves very shiny solder joints and is Non-corrosive, Non conductive
- Low Pleasant odor
- Will not run all over PCB when applied
- See more on Amazon...
Brand: SRA Soldering Products | Manufacturer: SRA Soldering Products
Dimensions: 1.00 x 7.00 x 1.00 Inches
See On Amazon #3
SRA Solder No-Clean Electronics Soldering Flux Paste, Safe for Lead and Lead Free Assembly. Non Acid Flux for Soldering Electronic Circuit Boards (PCBs) and Electrical Wire Tinning. USA Made (2oz Jar)
Asin: B0B2HXJNMB | Model: 135NC | PartNumber: 135NC | Ean: 0742383848151 | UPC: 742383848151
Type No-Clean Flux.
This Product Is Rohs Complaint.
Contains 2 Ounce In A "Hockey Puck" Jar.
Features
- The ideal flux for electrical and electronic repairs
- Contains 2 ounce in a hockey Puck jar
- Type No-Clean Flux
- This Product is RoHS Complaint
- See more on Amazon...
Brand: SRA Soldering Products | Manufacturer: SRA Soldering Products
Dimensions: 2.32 x 2.36 x 1.06 Inches
See On Amazon #4
2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Soldering and Soldering DIY (1.2oz/35g in a Jar)
Asin: B08MVXW4RY | Ean: 0727380271850 | UPC: 727380271850
Oxidation Resistance: Anti-Oxidation Effect On Soldering Iron Head Of Gold-Copper Alloy Substrate. Solder Flux For Semi-Solid, Not Easy To Dump..
What You Get: Rosin Soldering Flux Paste * 2, Our 7*24 Friendly Customer Service For Peace Of Mind..
Strong Applicability: Flux Is Suitable For Welding Instruments, Gold, Copper, Tin, Iron And Other Metals. Ideal For Electronic Welding, Repair And Rework..
Non-Corrosive: Rosin Is Not Conductive In Dry Conditions And Has Good Insulation. Is Not Corrosive To Metal Substances Such As Circuit Boards..
Features
- ENOUGHT QUANTITY: The package includes 2 jars of soldering flux. A total of 70 g. Enough quantity for your use.
- NON-CORROSIVE: Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards.
- OXIDATION RESISTANCE: Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump.
- STRONG APPLICABILITY: Flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework.
- WHAT YOU GET: Rosin soldering flux paste * 2, our 7*24 friendly customer service for peace of mind.
- See more on Amazon...
Brand: Romeda | Manufacturer: Romeda
See On Amazon #5
MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)
Asin: B00425FUW2 | Model: 8341-10ML | PartNumber: 8341-10ML | Ean: 0779008834107 | UPC: 779008834107
After Soldering, The Rosin Residue Is Non Corrosive, Non Conducting, Moisture Resistant, And Fungus Resistant.
Thixotropic Paste; Rohs Compliant.
Compatible With Lead Free And Leaded Solder Systems.
Instant Wetting.
Features
- Superior fluxing ability
- Instant wetting
- After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
- Compatible with lead free and leaded solder systems
- Thixotropic paste; RoHS compliant
- See more on Amazon...
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.16 x 0.16 x 0.47 inches | Weight: 0.04 Pounds
Warranty: warranty@mgchemicals.com
See On Amazon #6
IMPRESA 8oz Liquid Zinc Flux for Stained Glass, Soldering Work, Glass Repair and more - Easy Clean Up - Made in USA
Asin: B07VZM98H7 | Model: ZincFlux | PartNumber: ZincFlux | Ean: 0850008283246 | UPC: 850008283246
Completely Water-Soluble, Making Clean Up Quick And Easy.
Made In The Usa.
Can Be Used With Zinc, Lead And Copper Foil. Wash All Work Within 6-8Hrs..
Includes An Application Brush! Goes On Easy Without Being Runny Or Sloppy..
Features
- All-purpose flux specially formulated for stained glass use
- Includes an application brush! Goes on easy without being runny or sloppy.
- Completely water-soluble, making clean up quick and easy
- Can be used with zinc, lead and copper foil. Wash all work within 6-8hrs.
- Made In The USA
- See more on Amazon...
Brand: IMPRESA | Manufacturer: Impresa
Dimensions: 2.00 x 7.00 x 2.00 Inches
See On Amazon #7
Solder Flux Pen (10 ml) I Liquid Solder Flux I Soldering Flux I Electrical Solder I No Clean Liquid Flux I Rosin Flux I Soldering Flux for Electronics I Lead Free Liquid Solder I Flux for Soldering I
Asin: B0CBT3KQDF | Model: 1022 | PartNumber: 1022 | Ean: 7402000174355
✔️Non-Corrosive: Formulation With Neutral Ph, No Corrosion Involve After Soldering Process. Rosin Is Not Conductive In Dry Conditions And Has Good Insulation. Is Not Corrosive To Metal Surfaces Such As Circuit Boards.
✔️Non Toxic: Organic High Purity Formulation, Stable Performance And Low Volatility For Long Use Cycles, No Irritant Smell, Lead-Free, Zinc Chloride-Free And Ammonium Chloride-Free..
✔️Oxidation Resistance: Anti-Oxidation Effect Through Soldering , Desoldering, Rework And Reflow Electronic Processes For Their High Boiling Formulation Components. Giving As A Result Smooth, Shiny And Uniform Soldering Joints..
✔️Enought Quantity: The Package Includes 1 High Quality Pen Container Of Soldering Liquid Flux, 10 Ml Net Volume. Excellent Immersion, Wettability, Chemical And Technical Properties. Thus, Enough Quantity For Your Use. Strong Soldering And Welding Power Resulting Strong Low Residual Joints.
Features
- EXCELLENT QUALITY :High purity, Advanced RMA -Rosin Midly Activated- Liquid flux formula, RoHS Certificate Compliant, Organic, Environmental friendly soldering liquid flux . Formulation for electronic soldering applications. It is effective in removing oxides from Tin-Lead, Lead-free, Gold, Silver and Copper alloys.
- ENOUGHT QUANTITY: The package includes 1 High Quality Pen container of soldering liquid flux, 10 ml net Volume. Excellent Immersion, wettability, chemical and technical properties. Thus, Enough quantity for your use. Strong soldering and welding power resulting strong low residual joints
- NON-CORROSIVE: Formulation with neutral pH, no corrosion involve after soldering process. Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal surfaces such as circuit boards
- OXIDATION RESISTANCE: Anti-oxidation effect through soldering , desoldering, rework and reflow electronic processes for their high boiling formulation components. Giving as a result smooth, shiny and uniform soldering joints.
- NON TOXIC: Organic High Purity formulation, stable performance and low volatility for long use cycles, no irritant smell, Lead-free, Zinc Chloride-free and Ammonium Chloride-free.
- See more on Amazon...
Brand: QUIMTECH | Manufacturer: Quimtech
See On Amazon #8
No Clean Soldering Flux Paste(10CC/Bottle), Rosin Flux For Electronics Soldering, Lead-Free Rosin Soldering Flux For Circuit Boards and Copper Electrical Wire
Asin: B0C5TRJS5H | Model: YZ8020 | PartNumber: YZ8020
Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell.
For Soldering Ic, Smd, Smt, Bga, Handwork, Phone, Home Appliance Repairing, Removal Smd.
Product Advantages: Pushing-Type Design Smoother Flowing No Wasting During Welding.
Lead-Free, Halogen Free, Non-Corrosive, Good Flow Ability.
Features
- High Purity Rosin Soldering Flux, Good Helper For Repairing And Soldering
- Lead-Free, Halogen Free, Non-Corrosive, Good Flow Ability
- Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell
- Product Advantages: Pushing-Type Design Smoother Flowing No Wasting During Welding
- For Soldering IC, SMD, SMT, BGA, Handwork, Phone, Home Appliance Repairing, Removal SMD
- See more on Amazon...
Brand: YEZHET | Manufacturer: YEZHET
Dimensions: 0.90 x 1.00 x 2.35 inches
See On Amazon #9
Kwik Clean Flux Cleaner 16 Oz
Asin: B004MILHZ8 | Model: KwikClean | PartNumber: KwikClean | Ean: 0692599527275 | UPC: 692599527275
Also Use With Patina: Use Either The Same Paper Towel Or A Clean One To Apply The Patina..
After Patina Is Applied, Clean Again With Kwik-Clean. Polish As You Normally Would..
Mixing The Kwik-Clean With Patina Gives Added Cleaning Of The Flux And A Finer Tone On The Patina..
Just Spray On Kwik-Clean When You're Done Soldering, Then Use Paper Towel To Clean Project.
Features
- Kwik-Clean flux remover doesn't need mixing or diluting
- Just spray on Kwik-Clean when you're done soldering, then use paper towel to clean project
- ALSO USE WITH PATINA: use either the same paper towel or a clean one to apply the patina.
- Mixing the Kwik-Clean with Patina gives added cleaning of the flux and a finer tone on the patina.
- After Patina is applied, clean again with Kwik-Clean. Polish as you normally would.
- See more on Amazon...
Brand: Kwik | Manufacturer: Hoevel
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.00 Pounds
See On Amazon #10
Novacan Old Masters Flux - 8 Oz
Asin: B000N6KR90 | Model: OMFLUX | PartNumber: OMFLUX | Ean: 0798804422257, 0740999620017 | UPC: 740999620017, 798804422257
Cleans Up Easily With Water.
8 Oz.
All-Purpose Zinc Flux.
Brand: Novacan Industries | Manufacturer: Novacan Industries
Dimensions: 7.00 x 4.20 x 6.50 inches | Weight: 0.70 pounds
See On Amazon #11
LA-CO 22194 -Water Soluble, All Weather Copper Flux Paste for Soldering, Brush in Cap, Developed for Plumbing, 4 oz, Made in USA
Asin: B002DLU96O | Model: 22194 | PartNumber: 22194 | Ean: 0048615221946 | UPC: 048615221946
Non-Acid, Non-Toxic, And Lead-Free To Eliminate Safety Concerns.
All-Weather Formula For Use In Hot And Cold Climates. Meets Ansi/Nsf Std. 61 Specifications For Potable Water Use..
Cleans Pipe Upon Application, Allowing Solder To Run More Smoothly Around The Pipe.
Meets Industry Standard Astm B813 And Contains No Zinc Chloride To Reduce Corrosion Concerns.
Features
- Water-soluble paste won t leave residue in water piping
- Meets industry standard ASTM B813 and contains no zinc chloride to reduce corrosion concerns
- Non-acid, non-toxic, and lead-free to eliminate safety concerns
- Cleans pipe upon application, allowing solder to run more smoothly around the pipe
- All-weather formula for use in hot and cold climates. Meets ANSI/NSF Std. 61 specifications for Potable Water use.
- See more on Amazon...
First Available: 05/26/2017
Brand: La-Co | Manufacturer: La-Co
Dimensions: 1.00 x 1.00 x 1.00 Inches | Weight: 0.33 pounds
See On Amazon #12
No Clean Soldering Flux Paste & Solder Wick, Solder Flux for Electronics Soldering 10cc/Bottle (2PACK), 10Ft Desoldering Wick Braid Remover Solder
Asin: B0CH6LBTK4 | Model: RMA100X2+XXX2530 | PartNumber: RMA100X2+XXX2530
Low Residue: No Clean Solder Wick, As Only A Small Amount Of Residue Is Left After Use, Saving You Time On Cleaning.
Making Tin Removal Easier, This Is An Essential Product For Repairing Electronic Circuit Boards.
High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily.
Works Excellent For Desoldering Items.
Features
- Lead-Free, Excellent Wetting, No Need To Clean After Using
- Works Excellent for Desoldering Items
- Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily
- Making Tin Removal Easier, This is An Essential Product for Repairing Electronic Circuit Boards
- See more on Amazon...
Brand: Essmetuin | Manufacturer: ZHUOBAO
Dimensions: 4.00 x 1.00 x 2.00 inches
See On Amazon #13
Harris SSWF1/4 Stay Silv Brazing Flux, 1/4 lb. Jar, White
Asin: B005ENPK6W | Model: SSWF1/4 | PartNumber: SSWF1/4 | Ean: 0684032000780 | UPC: 684032000780
Item Package Dimension: 2.38" L X 2.38" W X 2.25" H.
Item Package Weight: 0.27 Lb.
Model Number: Sswf1/4.
Features
- Active range 1050 F - 1600 F
- Model Number: SSWF1/4
- Item Package Dimension: 2.38 L x 2.38 W x 2.25 H
- Item Package Weight: 0.27 lb
- See more on Amazon...
Brand: HARRIS | Manufacturer: The Harris Products Group
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #14
Chip Quik CQ4LF Liquid Flux No-Clean in 10ml (0.34oz) Pen w/tip
Asin: B07B53LNGX | Ean: 0700254126494 | UPC: 700254126494
Brand: Chip Quik | Manufacturer: Chip Quik®
Weight: 0.00 pounds
See On Amazon #15
Thermaltronics TMT-FP-1 Rosin Flux Paste, 2.0 oz (57 g)
Asin: B08GJYQHXZ
Contains 2 Ounces In A 3" Dia X 0.62“ H Can.
No Clean Flux.
Rohs Compliant With Sgs Report.
For Lead & Lead Free Applications.
Features
- Ideal for electronics soldering, repair & rework
- For Lead & Lead free applications
- Contains 2 ounces in a 3 Dia x 0.62 H Can
- RoHS Compliant with SGS Report
- No Clean Flux
- See more on Amazon...
Brand: Thermaltronics | Manufacturer: Thermaltronics
Dimensions: 0.63 x 3.00 x 3.00 Inches | Weight: 3.00 ounces
See On Amazon #16
No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
Asin: B098X43NQ6
Quality Material: These No Clean Soldering Wicks Are Made Of Quality Copper Wire And Adopt Precise Weaving Technology, Which Can Enhance Tension On The Surface To Absorb Excess Solder; The Liquid Solder Pen Is Made Of Reliable Materials, No Leaking And Safe For Protecting The Flux, Preventing You From Touching The Organic Solvents.
Wide Applications: These Soldering Pens And Braided Solder Wicks Can Be Applied For Laboratory, Computer, Home Repairs And Correcting Small Pcb Board Errors And Through Hole Solder Joints, Electronics Welding, Etc., Bringing A Lot Of Convenience To Your Work And Improving Efficiency.
Practical Tools: 10-Ml Solder Pen With Soft Brush Tip Can Release The Liquid Flow Moderately, Which Can Clean The Components Without Harming The Pcb Board Copper Foil Or Ic Pin; The Solder Remover Wick Features Good Thermal Conductivity And Absorption, Useful To Reduce The Risk Of Thermal Injury To The Circuit Boards.
Suitable Size: The Rosin Pen Measures About 14.3 Cm/ 5.6 Inches In Length, And The Solder Braided Wick Is About 1.5M/ 59 Inches Long And 2.5Mm/ 0.1 Inches Wide, Which Is Convenient To Hold In Hand; Please Check The Size Carefully Before Purchasing.
Features
- Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement
- Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing
- Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents
- Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards
- Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency
- See more on Amazon...
Brand: Ferraycle | Manufacturer: Ferraycle
See On Amazon #17
HARRIS SCPF4 Stay Clean Paste Soldering Flux, 4 oz. Jar
Asin: B001HWAE9C | Model: SCPF4 | PartNumber: SCPF4 | Ean: 0684032000209 | UPC: 684032000209
Flux.
4 Oz.
4Oz Bottle.
Brand: HARRIS | Manufacturer: The Harris Products Group
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.23 pounds
See On Amazon #18
4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches)
Asin: B07XZHN4W6 | Model: 01 | PartNumber: 01 | Ean: 0783710641281 | UPC: 783710641281
Rosin - Weighs 0.35 Oz/10 G. Promote The Flow Of Solder, Improve The Efficiency Of Welding Process, Allow Solder To Form Solid, Less Residue, No Need To Clean, Lasting Mechanical And Electrical Connections..
Welded 4-In-1 Set Contains 4 Necessary Welding Products, Saving You Time To Purchase Multiple Times.Warning:This Product Contains Lead, Be Aware Of Cancer And Reproductive Harm - For More Information:Www.P65warnings.Ca.Gov.
No-Clean Desoldering Core - 2.0Mm Wide And 29.5 Inches Long, Made Of Pure Oxygen-Free Copper Wire, It Has Strong Ability To Absorb Tin. No Cleaning, Low Residue. Removes More Solder Than Traditional Wicks, Making It Easy To Correct Errors On Small Pcb Boards..
Solder Wire - Weight 1.76 Oz / 50 G. Good Fluidity, Uniform Heating, Uniform Solder Joints, Clean, Contribute To The Rapid Completion Of Welding..
Features
- Soldering Iron Tip Cleaner - the best Soldering iron Tip Cleaner and base, no water,does not reduce the tip temperature. Made of brass wire, it is cleaner than traditional sponges. Safe and clean to use.
- Solder wire - weight 1.76 oz / 50 g. Good fluidity, uniform heating, uniform solder joints, clean, contribute to the rapid completion of welding.
- Rosin - weighs 0.35 oz/10 g. Promote the flow of solder, improve the efficiency of welding process, allow solder to form solid, less residue, no need to clean, lasting mechanical and electrical connections.
- No-clean desoldering core - 2.0mm wide and 29.5 inches long, made of pure oxygen-free copper wire, it has strong ability to absorb tin. No cleaning, low residue. Removes more solder than traditional wicks, making it easy to correct errors on small PCB boards.
- Welded 4-in-1 set contains 4 necessary welding products, saving you time to purchase multiple times.Warning:This product contains lead, be aware of cancer and reproductive harm - For more information:www.p65Warnings.ca.gov
- See more on Amazon...
Brand: YCD | Manufacturer: YCD
Weight: 0.11 pounds
See On Amazon #19
Rectorseal 14020 8-Ounce Nokorode Regular Paste Flux Tool
Asin: B000KKT4AW | Model: 14020 | PartNumber: 14020 | Ean: 0052541140202 | UPC: 052541140202
This Is Manufactured In United States.
Special Oil Base Protects The Solder Joint Against Corrosive Attack.
Lead Free And Acid Free-Safe To Use On Potable Water Systems.
When Heated, It Reduces Surface Tension And Allows The Solder To Flow Easily And Uniformly Into The Joint.
Special Oil Base Protects The Solder Joint Against Corrosive Attack.
It's Non-Aggressive Formula Is Ideal When Used On Copper And Brass Fittings.
Cleans And Fluxes In One Operation Saving Time And Money.
Cleans And Fluxes In One Operation Saving Time And Money.
Recroseal's Nokorode Regular Paste Solder Flux 8Oz.
Features
- Nokorode regular paste solder flux lead free, 8 oz
- Recroseal's nokorode regular paste solder flux 8Oz
- This is manufactured in United States
- Cleans and fluxes in one operation saving time and money
- Special oil base protects the solder joint against corrosive attack
- It's non-aggressive formula is ideal when used on copper and brass fittings
- Lead free and acid free-safe to use on potable water systems
- When heated, it reduces surface tension and allows the solder to flow easily and uniformly into the joint
- Cleans and fluxes in one operation saving time and money
- Special oil base protects the solder joint against corrosive attack
- It's non-aggressive formula is ideal when used on copper and brass fittings
- Lead free and acid free-safe to use on potable water systems
- When heated, it reduces surface tension and allows the solder to flow easily and uniformly into the joint
- See more on Amazon...
Brand: Rectorseal | Manufacturer: The Rectorseal Corporation
Dimensions: 4.50 x 2.25 x 2.25 Inches | Weight: 0.10 pounds
See On Amazon #20
Flux Off ChemtronicsES835B Flux Remover, Brush, 5 fl.oz.
Asin: B00DK2AY1U | Model: ES835B | PartNumber: ES835B | Ean: 0636501379309 | UPC: 636501379309
Manufacturer Name - Chemtronics.
Cfc And Hcfc Free.
Dispensing Method: Brush Applicator Series: Flux Off Volume: 5Fl.Oz. (Us) Leaded Process Compatible: Yes Rohs Compliant: Yes.
Country Of Origin - United States.
Features
- Price for: each cleaner type: flux remover cleaner applications: electrical/ electronics/ heat sinks/ pcbs
- Country of origin - united states
- Manufacturer name - Chemtronics
- Dispensing method: brush applicator series: flux off volume: 5Fl.Oz. (Us) leaded process compatible: yes rohs compliant: yes
- CFC and HCFC Free
- See more on Amazon...
First Available: 12/15/2017
Brand: Flux Off | Manufacturer: Chemtronics
Dimensions: 7.40 x 2.20 x 2.60 inches | Weight: 0.50 pounds
See On Amazon
Looking For Something Else?
Search