INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4M(Black)
Asin: B0CS3H34CQ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Increase The Width Of Each Side By 4Mm, Providing Better Stability And Climbing Performance..
Come With Hardened Cvd Shafts, Steel 12/24T Gears, 5Mm(+1Mm) Brass Wheel Hexes And Nuts..
The Entire Axles Have Been Extended, Not Just The Dogbone Shafts, Which Prevents The Dogbone Shafts From Being Overburdened..
Equipped With A Servo-On-Axle Lay Down Servo Mount That Lowers The Center Of Gravity..
Features
- Diamond shaped pumpkin for more realistic scale look.
- Equipped with a servo-on-axle lay down servo mount that lowers the center of gravity.
- Increase the width of each side by 4mm, providing better stability and climbing performance.
- The entire axles have been extended, not just the dogbone shafts, which prevents the dogbone shafts from being overburdened.
- Come with hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon Similar To INJORA 4mm Diamond Axles with
#1
INJORA Brass 1.0 Beadlock Wheel- Negative Offset 3.15mm Wheels for 1/18 TRX4M SCX24 Gladiator Bronco C10 JLU Deadbolt Axial 1/24 Crawler,W1005
Asin: B0B8H9CJFX | Model: YQW-1005 | PartNumber: YQW-1005
The Black Hard Coating With Chamfered Edges Adds Bright Touch And Better Looking, To Prevent Corrosion Also..
Standard 1.0" Wheel Size, Suit For 1/18 Trx4m Axial Scx24 Gladiator Deadbolt Bronco C10 Jlu And Other Micro Crawler Car Upgrade..
The Additional Weight Of The All Brass Design Adds 47G Of Weight Per Wheel (188G For Four Wheels), And Will Help Keep Your Rc Car To The Rocks When The Trail Gets Technical..
Negative Offset -3.15Mm, Increased Spacing Between Hubs For Added Stability..
Features
- INJORA amazing all brass 1.0" beadlock wheel rims are a unique option for the SCX24 Crawler Car.
- Negative offset -3.15mm, increased spacing between hubs for added stability.
- The black hard coating with chamfered edges adds bright touch and better looking, to prevent corrosion also.
- The additional weight of the all brass design adds 47g of weight per wheel (188g for four wheels), and will help keep your rc car to the rocks when the trail gets technical.
- Standard 1.0 wheel size, suit for 1/18 TRX4M Axial SCX24 Gladiator Deadbolt Bronco C10 JLU and other micro crawler car upgrade.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 3.15 x 0.79 x 3.15 inches
See On Amazon #2
INJORA Front&Rear Axles Set - +4mm Extended Aluminum Complete Axles for TRX4M Upgrade 1/18 RC Crawler Car
Asin: B0CFDMKTVF | Model: 4M-61FR | PartNumber: 4M-61FR
[Upgrade Accessories] Come With Hardened Cvd Shafts, Steel 12/24T Gears, 5Mm(+1Mm) Brass Wheel Hexes And Nuts..
[Wide Application] Designed Specifically For Trx4m Bronco Defender K10 High Trai 1/18 Rc Crawler. Note：As The Axle Housings Are Extended, So They Are Not Compatible With Original Trx4m Size Steering Links And Dogbone Shafts..
[Pre Assembly] Pre-Assembled Make Installation More Simpler, Coming With All Hardware For The Axles..
[Unique Design] +4Mm Axles Increase The Width Of Each Side By 4Mm, Increase Total Length By 8 Mm. 4Mm Extended Desgin Provides Better Stability And Climbing Performance..
Features
- [Well Performance] CNC machined and black anodized, excellent workmanship and high precision.
- [Unique design] +4mm axles increase the width of each side by 4mm, increase total length by 8 mm. 4mm extended desgin provides better stability and climbing performance.
- [Upgrade Accessories] Come with Hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.
- [Pre Assembly] Pre-assembled make installation more simpler, coming with all hardware for the axles.
- [Wide Application] Designed specifically for TRX4M Bronco Defender K10 High Trai 1/18 RC crawler. Note As the axle housings are extended, so they are not compatible with original TRX4M size steering links and dogbone shafts.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 1.57 x 5.12 x 3.15 inches
See On Amazon #3
INJORA Drive Shaft Stainless Steel Heavy-Duty Driveshafts for Axial SCX10 90046 AXI03007 TRX4 Redcat Gen8 1/10 RC Car Crawler Upgrade(104-139mm)
Asin: B0BXNWZZF4 | Model: DG-CD04-104 | PartNumber: DG-CD04-104
【Accessories Included】4Mm Set Pins Included To Attach To Pinion And Transmission..
【Model Matching】Suit For 1/10 Rc Crawler Car Axial Scx10 90046 Axi03007 Trx4 Redcat Gen8. Please Measure The Size You Need Before Purchasing..
【Standard Ratio】Scale Joint And Spline Diameter Size For Realistic Appearance..
【New Upgrade】Universal Joint Style, Splined Engagement, Fit 5Mm Output Shaft..
Features
- Excellent Quality Stainless steel material, durable and rust-proof, long service life.
- New Upgrade Universal joint style, splined engagement, fit 5mm output shaft.
- Accessories Included 4mm set pins included to attach to pinion and transmission.
- Standard Ratio Scale Joint and spline diameter size for realistic appearance.
- Model Matching Suit for 1/10 RC Crawler Car Axial SCX10 90046 AXI03007 TRX4 Redcat Gen8. Please measure the size you need before purchasing.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #4
INJORA Front & Rear Axles Set +4mm Extended Black Axles Upgrades Set for SCX24 Deadbolt JLU C10 Bronco Gladiator Axial 1/24 RC Crawler Upgrade Parts
Asin: B0B9BHNT8D | Model: SCX24-98BK | PartNumber: SCX24-98BK
【New Upgrades】The Injora +4Mm Extended Axle Equipped With 13T(Front) & 16T(Rear) Worm Gear Set. Compared With Original Scx24 16T, 13T Overdrive Gears Increase Speed About 23%..
【Applicable Models】Suit For Axial Scx24 All Series, Deadbolt Jlu C10 Gladiator Bronco. High Compatibility, Compatible Not Only With Stock Scx24 And Emax Servo Mounts, But Also With Stock Axial Or Injora Overdrive Gear Sets..
【Well Performance】Overdrive The Front Will Pull Your Scx24 Crawler Car Faster In The Front, It Allows You To Climb Better And Reduce Rollover. Also Have A Stronger Drag Break Effect Goind Downhill..
【Unique Designs】Adds 4Mm To The Track Width On Each Side Of The Vehicle. This Helps To Increase Stability Over Rough Terrain, As Well As Increase Steering Clearance To Allow A Wider Selection Of Tire Options..
Features
- Outstanding Appearance CNC aluminum machined, Black anodized, improves the overall performance.
- Unique Designs Adds 4mm to the track width on each side of the vehicle. This helps to increase stability over rough terrain, as well as increase steering clearance to allow a wider selection of tire options.
- New Upgrades The INJORA +4mm extended axle equipped with 13T(Front) & 16T(Rear) worm gear set. Compared with original SCX24 16T, 13T overdrive gears increase speed about 23%.
- Well Performance Overdrive the front will pull your scx24 crawler car faster in the front, it allows you to climb better and reduce rollover. Also have a stronger drag break effect goind downhill.
- Applicable Models Suit For Axial SCX24 all series, Deadbolt JLU C10 Gladiator Bronco. High Compatibility, compatible not only with stock SCX24 and EMAX servo mounts, but also with stock Axial or INJORA overdrive gear sets.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 1.97 x 5.91 x 3.94 inches
See On Amazon #5
INJORA +5mm Diamond Portal Axles with Lay Down Servo Mount & Links for 1/18 RC Crawler TRX4M Upgrade
Asin: B0D3BWVP27 | Model: 4M-104BKFR | PartNumber: 4M-104BKFR
+5Mm Axles Increase The Width Of Each Side By 5Mm, Increase Total Length By 10 Mm, Providing Better Stability And Climbing Performance..
Pre-Assembled Complete Axles. Please Grease The Axles Before Installation..
The Entire Axles Have Been Extended, Not Just The Dogbone Shafts, Which Prevents The Dogbone Shafts From Being Overburdened..
Come With A Servo-On-Axle Lay Down Servo Mount, Hardened Cvd Shafts, 12/24T Axle Gears, 15/20T Portal Gears, Brass Wheel Hexes And Nuts..
Features
- INJORA portal axles lift the pumpkin to provide ground clearance, diamond shaped pumpkin for more realistic scale look.
- Come with a servo-on-axle lay down servo mount, hardened CVD shafts, 12/24T axle gears, 15/20T portal gears, brass wheel hexes and nuts.
- +5mm axles increase the width of each side by 5mm, increase total length by 10 mm, providing better stability and climbing performance.
- The entire axles have been extended, not just the dogbone shafts, which prevents the dogbone shafts from being overburdened.
- Pre-assembled complete axles. Please grease the axles before installation.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 1.57 x 5.12 x 3.54 inches
See On Amazon #6
INJORA Brass Internal Beadlock Ring Clamp Ring 94g Wheel Weight Fit 1.9" Wheel Rim for 1/10 RC Crawler Axial SCX10 II 90046 TRX-4 VS4-10 SCX10 Pro Upgrade Parts, 4PCS
Asin: B0B6NSKZ3N
Noticeable Weight Gain, Lower The Vehicle’S Gravity, Increase The Stability.
Note: The Wheel Rims Are Not Included. Some 1.9 Wheels May Not Be Compatible, Please Refer To The Diameter And Width Described.
Inner Diameter 48.6Mm/1.91Inch, Fit Most Of 1.9" Wheel Rims.
Single Weight Is 94G, Fit Perfectly In The Beadlock Wheels.
Features
- Made of high-quality brass and etched with the INJORA logo, looks more attractive
- Single weight is 94g, fit perfectly in the beadlock wheels
- Noticeable weight gain, lower the vehicle s gravity, increase the stability
- Inner diameter 48.6mm/1.91inch, fit most of 1.9 wheel rims
- Note: the wheel rims are not included. Some 1.9 wheels may not be compatible, please refer to the diameter and width described
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #7
INJORA Front Rear Axles Set CNC Aluminum Complete Axle with Worm Gear Set for Axial SCX24 Deadbolt C10 JLU Gladiator Bronco 1/24 RC Crawler Upgrade Parts
Asin: B0B8SGJ2ZV | Model: SCX24-123FR | PartNumber: SCX24-123FR
【Well Performance】Overdrive The Front Will Pull Your Scx24 Crawler Car Faster In The Front, It Allows You To Climb Better And Reduce Rollover. Also Have A Stronger Drag Break Effect Goind Downhill..
【Applicable Models】Suit For Axial Scx24 All Series, Deadbolt Jlu C10 Gladiator Bronco..
【High Compatibility】Compatible Not Only With Stock Scx24 And Emax Servo Mounts, But Also With Stock Axial Or Injora Overdrive Gear Sets..
【New Upgrades】Equipped With 13T(Front) & 16T(Rear) Worm Gear Set. Compared With Original Scx24 16T, Overdrive 13T Gears Can Increase Speed About 23%..
Features
- Outstanding Appearance CNC aluminum machined, Black anodized, improves the overall performance.
- New Upgrades Equipped with 13T(Front) & 16T(Rear) Worm Gear Set. Compared with original SCX24 16T, overdrive 13T gears can increase speed about 23%.
- Well Performance Overdrive the front will pull your scx24 crawler car faster in the front, it allows you to climb better and reduce rollover. Also have a stronger drag break effect goind downhill.
- High compatibility Compatible not only with stock SCX24 and EMAX servo mounts, but also with stock Axial or INJORA overdrive gear sets.
- Applicable Models Suit For Axial SCX24 all series, Deadbolt JLU C10 Gladiator Bronco.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #8
INJORA Metal Front Axle Shaft for 1:10 RC Crawler INJORA SCX10 YQCQ-01 Axle Replacement Parts
Asin: B09ST94C89
Replacement Parts For 1:10 Rc Crawler Scx10 Yqcq-01 Axle Replacement Parts.
Note: Please Check Whether The Picture Accessories Fit Your Axle Before You Buy.
Upgrade Material To Enhance The Hardness.
Features
- 100% brand new and high quality
- Upgrade material to enhance the hardness
- Replacement parts for 1:10 RC Crawler SCX10 YQCQ-01 Axle Replacement Parts
- Note: Please check whether the picture accessories fit your axle before you buy
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #9
INJORA Front and Rear Complete Axles Set - Stock Length CNC Aluminum Axles for 1/18 RC Crawler TRX4M Upgrade
Asin: B0CLD7QHN9
Includes Brass Wheel Hexes For Enhanced Strength And Stability..
Features Hardened Cvd Shafts And Steel 12/24T Gears For Enhanced Strength And Longevity..
Same Length As Trx4m Stock Axles For Easy Installation And Compatibility..
Pre-Assembled, Coming With All Hardware For The Axles, Excellent Workmanship And High Precision Ensure Reliable Performance..
Features
- CNC machined,black anodized for superior durability and a sleek appearance.
- Pre-assembled, coming with all hardware for the axles, excellent workmanship and high precision ensure reliable performance.
- Includes brass wheel hexes for enhanced strength and stability.
- Same length as TRX4M stock axles for easy installation and compatibility.
- Features hardened CVD shafts and steel 12/24T gears for enhanced strength and longevity.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon
Looking For Something Else?
Search