Keel Guard for Boats Fiberglass Bass Aluminum Boats,Boat Keel Protector Hull Guard Protector Shield Protects from Rocks Ramps Scratches Damage, Self-Adhesive DIY 5 Inch Wide x 4 Feet to 10 Feet Length
Asin: B0CSDM5JDV | Model: 6FT boat keel guards Black | PartNumber: 6FT boat keel guards Black
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Premium Workmanship: The Keel Protector For Boats Is Produced From Thick And Durable Materials That Absorb The Shocks And Impacts With Maximum Protection On Your Boat Keel. The Rugged And Flexible 5 Inch Wide Boat Hull Protector Conforms To Your Boat's Keel Easily And Won't Drag Your Boat Down..
Size Guide: The 6 Foot Keel Guard Fit Boat Size Up To 18 Ft. It Is Recommended That Apply The Keelguard Keel Protector Beyond The Lowest Point Of The Boat Which Protect Your Boat From Snagging And Tearing When Beaching Or Loading. The Length Of Boat Keel Protection Can Be Extended, But Not Shorten It..
Buy With Confidence: We Are Confident With Our Shield Keel Guard, If You Have Any Problems Or Questions, Just Contact With Us And Our Customer Service Team Will Help You Within 24 Hours..
Easy To Install With Strong Adhesion: The Boat Keel Protector Comes With Strong Self-Adhesive 3M Tape That Provide Firm And Tight Application. Just Stick Keel Guards On Prepared Hull Surface, Delimit, Etch, Clean, Prime And Apply! Warm Tips: Keel Primer Was Not Included In The Kit..
Compatibility: Keel Guard For Fiberglass Boats (Bass Boats, Ranger Bass Boat, Ski Boats, Wake Boats, Runabouts) + Some Aluminum Boats (Fishing And Jon Boats) + Recreational Watercraft (Ski Boats, Skiffs, Dinghy And Most Jet Boats). The Boat Keel Guard Protector Can Be Applied On Slightly Raised Strakes And Chines With Applied Sealant To Seal Off Gaps..
Features
- Reliable Keel Guards for Boats: Our keel guard protect your boat keel from sand, rocks, concrete ramps, oyster beds, underwater objects and reduce scrapes, daily wear and tear on the water. Save the keel from any future possible damage with our keel guards and save the cost of boat repairing form continuous shore landing.
- Compatibility: Keel guard for fiberglass boats (Bass Boats, Ranger Bass Boat, Ski Boats, Wake Boats, Runabouts) + Some aluminum boats (Fishing and Jon Boats) + Recreational watercraft (Ski Boats, Skiffs, Dinghy and most Jet Boats). The boat keel guard protector can be applied on slightly raised strakes and chines with applied sealant to seal off gaps.
- Premium Workmanship: The keel protector for boats is produced from thick and durable materials that absorb the shocks and impacts with maximum protection on your boat keel. The rugged and flexible 5 inch wide boat hull protector conforms to your boat's keel easily and won't drag your boat down.
- Easy to Install with Strong Adhesion: The boat keel protector comes with strong self-adhesive 3M tape that provide firm and tight application. Just stick keel guards on prepared hull surface, delimit, etch, clean, prime and apply! Warm tips: keel primer was not included in the kit.
- Size Guide: The 6 foot Keel Guard fit boat size up to 18 ft. It is recommended that apply the keelguard keel protector beyond the lowest point of the boat which protect your boat from snagging and tearing when beaching or loading. The length of boat keel protection can be extended, but not shorten it.
- Buy with Confidence: We are confident with our shield keel guard, if you have any problems or questions, just contact with us and our Customer Service Team will help you within 24 hours.
- See more on Amazon...
Brand: JYINCPED | Manufacturer: JYINCPED
Warranty: NO
See On Amazon Similar To Keel Guard for Boats Fiberglass
#1
INOOMP 1 Set Boat Vent Cover Nylon Marine Wire Cover Boat Cable Cover Boat Cover Vents Boat Wire Ventilation Cover for Boat Keel Guard for Fiberglass Boat Wires Clamshell Screw
Asin: B0BYZQP1D6 | Model: 17VFQKM33SUK0318PFVTXMI | PartNumber: 17VFQKM33SUK0318PFVTXMI
The Workmanship Of This Product Is Perfect, And You Will Have A Good Experience In Using It. Uv And Weather Resistant And Routing Cables, Wire, And So On..
Your Is Our Greatest Motivation. We Are Committed To Meeting The Needs Of Every Customer. If You Have Any Problems, Please At Any Time, And We Will Provide Good Services Or Replacement. Look No Further To Take Them Home!!.
With Mounting Screws, It Can Be Easily Installed On The Boat And Will Not Fall Off Easily. Suitable For Boats, Speedboats, Yachts, User Experience..
To Seal And Splash-Proof Openings For Wire, Hose, Also Locker Vents. Constructed From Marine Grade Nylon For Excellent Seawater Resistance, Durable Enough To Be Exposed To Air On Board..
Features
- This boat vent cover with UV and weather resistant and routing cables, wire, Lasting for years of use without the worry of rusting or .
- to seal and splash-proof openings for wire, hose, Also locker vents. Constructed from marine grade nylon for excellent seawater resistance, durable enough to be exposed to air on board.
- The workmanship of this product is perfect, and you will have a good experience in using it. UV and weather resistant and routing cables, wire, and so on.
- With mounting screws, it can be easily installed on the boat and will not fall off easily. Suitable for boats, speedboats, yachts, user experience.
- Your is our greatest motivation. We are committed to meeting the needs of every customer. If you have any problems, please at any time, and we will provide good services or replacement. Look no further to take them home!!
- See more on Amazon...
Brand: INOOMP | Manufacturer: INOOMP
Weight: 0.16 Pounds
See On Amazon #2
DECOHS 2 Pcs Bow Guard for Boats- Stainless Steel Boat Bow Protector Notched- Bow Keel Guard with Adhesive for Protection Boats Ships from Wear and Scratches
Asin: B0CSFG7WM3 | Model: DEC-Bow-Guard-Boat-2 | PartNumber: DEC-Bow-Guard-Boat-2
Durable Material: Our Bow Guards For Boats Are Made Of Stainless Steel, Mirror Polished, Not Easy To Rust, Not Easy To Break, Can Effectively Protect Your Boats For A Long Time..
Safe To Use: Our Bow Protective Guard Fits Your Boat Perfectly, It Is Polished, Smooth Edges, Comfortable To Touch, Will Not Hurt Your Hands, And More Beautiful..
Packaging Includes: You Will Receive 2 Pcs Stainless Steel Boat Keel Guards, The Size Is 9 X 8.75 Inch, Which Fits Most Boats And No More Worries About Damaging Your Boat Bow..
Easy To Install: First Apply Strong Adhesive To The Outer Shell, Dry The Surface Of The Target Location, Then Bend The Boat Bow Protector To Fit Your Hull, And Peel Off The Adhesive Back Protective Film, Then Attach It To The Target Location, And Finally Peel Off The Thin Film On The Surface Of The Guard..
Features
- Boat Bow Guard: The bow protector for boat can be tightly attached to your boat keel, protecting your boat from the wear and scratches of the trailer roller during loading, unloading and transportation, avoiding expensive maintenance costs.
- Easy to Install: First apply strong adhesive to the outer shell, dry the surface of the target location, then bend the boat bow protector to fit your hull, and peel off the adhesive back protective film, then attach it to the target location, and finally Peel off the thin film on the surface of the guard.
- Durable Material: Our bow guards for boats are made of stainless steel, mirror polished, not easy to rust, not easy to break, can effectively protect your boats for a long time.
- Packaging Includes: You will receive 2 pcs stainless steel boat keel guards, the size is 9 x 8.75 inch, which fits most boats and no more worries about damaging your boat bow.
- Safe to Use: Our bow protective guard fits your boat perfectly, it is polished, smooth edges, comfortable to touch, will not hurt your hands, and more beautiful.
- See more on Amazon...
Brand: DECOHS | Manufacturer: DECOHS
Warranty: No
See On Amazon #3
PereGuard Kayak Keel Guard 4" Width Black (5 feet) Kayak Canoe Protective Guard Abrasion Resistance
Asin: B08BK3XY54 | Ean: 0615499533641 | UPC: 615499533641
Application: Pereguard Is Simple To Apply. Just Peel Off The Backing Paper And Apply The Guard. The Guard Comes With A Layer Of Marine Grade Adhesive That Is Pre-Applied. Clean The Surface, Peel Off The Backing Paper Off The Guard And Then Apply The Guard. Pereguard Works On Thermoformed Boats, Fiberglass, Rotomold Plastic, Aluminum, And Many Other Materials..
Uses: Ideal For Kayaks, Canoes, Sup Boards, Catamarans, And Many Other Applications.
Design: Pereguard Is Made From Durable Pvc And Has A Smooth Surface To Reduce Friction In The Water. The Adhesive Is Industry Strength And Works Well In All Environments. The Guard Is Thin To Prevent Drag, And The Edges Are Tapered To Seal With The Boat And Keep Dirt And Grime Away From The Adhesive Layer..
Color: Black And Guard Width Is 4".
Features
- INCLUDED: Roll of PereGuard, Final Prep Wipes to ensure the surface is clean and promote strong adhesion, and detailed Instructions
- COLOR: Black and guard WIDTH is 4
- APPLICATION: PereGuard is simple to apply. Just peel off the backing paper and apply the guard. The guard comes with a layer of marine grade adhesive that is pre-applied. Clean the surface, peel off the backing paper off the Guard and then apply the Guard. PereGuard works on thermoformed boats, fiberglass, rotomold plastic, aluminum, and many other materials.
- DESIGN: PereGuard is made from durable PVC and has a smooth surface to reduce friction in the water. The adhesive is industry strength and works well in all environments. The guard is thin to prevent drag, and the edges are tapered to seal with the boat and keep dirt and grime away from the adhesive layer.
- USES: Ideal for kayaks, canoes, SUP boards, catamarans, and many other applications
- See more on Amazon...
Brand: PereGuard | Manufacturer: PereGuard
See On Amazon #4
Gator Patch Kayak Keel Guard - Keel Strip Form - Protects and Repairs Vulnerable Kayak Keel Contact Points - DIY Installation - Prep, Peel and Stick - Easy To Use - USA Made
Asin: B088PB2J9L | Model: GP-318 | PartNumber: GP-318 | Ean: 0604014003066 | UPC: 604014003066
Exceptional Quality: Combining The Strength Of Polyester Resin And Fiberglass With A Uv Light Activator Makes Our Patch Kit Watertight And Impenetrable. Bonds To Hdpe, Plastic, Fiberglass, Aluminum And Wood Surfaces..
Made In The Usa: With Over 25 Years Of Experience, We Take Customer Satisfaction Seriously! If Our Waterproof Gator Patch Kayak Keel Guard Doesn’T Meet Your Expectations, We Proudly Stand Behind Our Product With Our 100% Satisfaction Guarantee.
Conveniently Designed: Now In A 3” X 18” Keel Strip, It Is Easier To Use Than Ever! Simply Cut To The Size That Suits Your Needs. Angled And Curved Surfaces? No Problem! Moldable Around Curves, Edges, Dents Or Joints And Perfect For Any Emergency Repair..
Easy Installation: Simply Prep, Peel, Stick And Cure In The Sun For Up To One Hour Making Your Patch 500 Psi Strong, Permanent And Ready To Use! For A Finished Look, Sand And Paint To Match Your Kayak..
Features
- AWARD WINNING: Named Best Paddling Accessory by PSR, New Product Showcase two years in a row! With superior reliability and strength, our canoe & kayak keel guard is a long term solution to protect or repair your kayak from drops, skids and cracks.
- EASY INSTALLATION: Simply prep, peel, stick and cure in the sun for up to one hour making your patch 500 PSI strong, permanent and ready to use! For a finished look, sand and paint to match your kayak.
- EXCEPTIONAL QUALITY: Combining the strength of polyester resin and fiberglass with a UV light activator makes our patch kit watertight and impenetrable. Bonds to HDPE, plastic, fiberglass, aluminum and wood surfaces.
- CONVENIENTLY DESIGNED: Now in a 3 x 18 Keel Strip, it is easier to use than ever! Simply cut to the size that suits your needs. Angled and curved surfaces? No problem! Moldable around curves, edges, dents or joints and perfect for any emergency repair.
- MADE IN THE USA: With over 25 years of experience, we take customer satisfaction seriously! If our waterproof Gator Patch Kayak Keel Guard doesn t meet your expectations, we proudly stand behind our product with our 100% Satisfaction Guarantee
- See more on Amazon...
Brand: Gator Guards | Manufacturer: Gator Guards
Dimensions: 1.50 x 19.00 x 5.00 inches
See On Amazon #5
Dunzy 1 Pcs Stainless Steel Square Bow Guards That Need to Be Bend in Advance to Fit The Hull for Protection Boat (Notched Bow Style)
Asin: B0CPLKLBJK
Convenient To Operate: Just Bend The Bow Guard In The Middle To Fit The Shape Of The Keel, Then Peel Off The Protective Film On The Back Of The Adhesive Bow Guard, Finally Attach The Guard To Targeted Position, Press It For A Few Seconds, No Other Tools Needed.
Appropriate Size To Use: The Boat Hull Protector Is Approx. 22.86 X 22.23 Cm/ 9 X 8.75 Inches, Suitable For Most Boats, Able To Bring You A Pleasant Using Experience.
Kind Tips: It's Recommended That You Dry And Wipe Target Position Before You Use The Boat Trailer Keel Pad, To Get A Better Result; The Pad Is Not Applicable To Boat Hulls That Have Multiple Curves And Many Protrusions.
Reliable Material For Lasting Service: The Bow Guard Adopts Quality 316 Stainless Steel And Mirror Polished, Compact And Sturdy In Structure, No Easy To Break Or Rust, Thus Can Serve You For A Long Time.
Features
- Nice Protection for Boat Hull: the boat trailer keel pad can cling tightly to the keel of your boat, reduce the direct friction and scratches of the paint caused by trailer, rock, ramp and more
- Reliable Material for Lasting Service: the bow guard adopts quality 316 stainless steel and mirror polished, compact and sturdy in structure, no easy to break or rust, thus can serve you for a long time
- Convenient to Operate: just bend the bow guard in the middle to fit the shape of the keel, then peel off the protective film on the back of the adhesive bow guard, finally attach the guard to targeted position, press it for a few seconds, no other tools needed
- Kind Tips: it's recommended that you dry and wipe target position before you use the boat trailer keel pad, to get a better result; The pad is not applicable to boat hulls that have multiple curves and many protrusions
- Appropriate Size to Use: the boat hull protector is approx. 22.86 x 22.23 cm/ 9 x 8.75 inches, suitable for most boats, able to bring you a pleasant using experience
- See more on Amazon...
Brand: Dunzy | Manufacturer: Dunzy
See On Amazon #6
Wesiti Boat Keel Guard Kayak Repair Patch Fiberglass Repair Kit for Hull DIY Protector Accessories (Black,4 Inch)
Asin: B0C1ZF6D8Y | Model: UTE-Wesiti-320 | PartNumber: UTE-Wesiti-320
Fine Workmanship: Our Keel Guard For Kayak Is Light But Strong, Wear Resistant And Reliable, Not Easy To Break Or Deform, Allowing You To Use It With Confidence For A Long Time.
Widely Applicable In Daily Life: This Kayak Keel Guard Can Be Applied To Various Kinds Of Boats, Including But Not Limited To Kayak, Inflatable Boats, Fiberless Boats And Aluminum Boats.
Thoughtful And Considerate Design: The Boat Keel Guard Protector Is Easy To Use, And You Can Just Tear Off The Paper On The Back, Determine Where You Want To Paste It, Then You Can Paste It On The Boat.
Proper Size To Use: Our Boat Hull Protector Comes With An Appropriate Size, Measuring About 4 Inches/ 10.5 Cm In Width, 79 Inches/ 200 Cm In Length And 2 Mm In Thickness, Please Confirm The Size Before Purchase.
Features
- Package Includes: you will receive 1 roll of boat keel guard protector, the proper quantity can meet your daily requirements for usage and replacement, and you can use them for different boats and yacht
- Proper Size to Use: our boat hull protector comes with an appropriate size, measuring about 4 inches/ 10.5 cm in width, 79 inches/ 200 cm in length and 2 mm in thickness, please confirm the size before purchase
- Fine Workmanship: our keel guard for kayak is light but strong, wear resistant and reliable, not easy to break or deform, allowing you to use it with confidence for a long time
- Thoughtful and Considerate Design: the boat keel guard protector is easy to use, and you can just tear off the paper on the back, determine where you want to paste it, then you can paste it on the boat
- Widely Applicable in Daily Life: this kayak keel guard can be applied to various kinds of boats, including but not limited to kayak, inflatable boats, fiberless boats and aluminum boats
- See more on Amazon...
Brand: Wesiti | Manufacturer: Wesiti
See On Amazon #7
Sratte 2 Rolls Self Adhesive DIY Keel Guard for Fiberglass and Aluminum Boats Protector Kayaks Accessories, Black, White (118 x 2 Inch)
Asin: B0BXNCNP5N | Model: PR-Sratte-1811 | PartNumber: PR-Sratte-1811
Reliable And Waterproof: The Keel Guard For Fiberglass Boat Adopts Quality Pvc Material And With Marine Glue On It Back, Strong Adhesion And Durability, Not Easy To Tear, Deform, Even Break, Solid And Colorfast, Which Can Serve You For A Long Period.
Practical And Stylish: This Boat Guard Features Fine Workmanship, And Is Designed With A Cone Shape Which Can Fit Your Boats Better And Prevent Your Boats From Getting Ruined By Sands, Rocks, Concrete Ramps And Other Hard Things, Making You Feel Safe And Comfortable To Use.
Broad Application: These Kayak Repair Parts Are A Necessary And Useful Accessory For Many Boats, Such As, Kayak, Inflatable Boats, Fiberless Boats, Aluminum Boats And More, Resistant To Water, And Can Stop Your Boats From Scratches.
Cuttable Size: Our Kayak Keel Guard Measures Approx. 118 X 2 Inches/ 3 X 0.05 Meter In Length And Width, Suitable For Many Types Of Boats, And You Can Cut A Proper Size According To Your Actual Needs, Bringing You A Pleasant And Reliable Use Experience.
Features
- Enough to Use: the package comes with 2 rolls of kayak keel guards in different colors, namely black and white, well to match and useful, which is sufficient for you to cater to your repair needs and replacement in daily life
- Cuttable Size: our kayak keel guard measures approx. 118 x 2 inches/ 3 x 0.05 meter in length and width, suitable for many types of boats, and you can cut a proper size according to your actual needs, bringing you a pleasant and reliable use experience
- Reliable and Waterproof: the keel guard for fiberglass boat adopts quality PVC material and with marine glue on it back, strong adhesion and durability, not easy to tear, deform, even break, solid and colorfast, which can serve you for a long period
- Broad Application: these kayak repair parts are a necessary and useful accessory for many boats, such as, kayak, inflatable boats, fiberless boats, aluminum boats and more, resistant to water, and can stop your boats from scratches
- Practical and Stylish: this boat guard features fine workmanship, and is designed with a cone shape which can fit your boats better and prevent your boats from getting ruined by sands, rocks, concrete ramps and other hard things, making you feel safe and comfortable to use
- See more on Amazon...
Brand: Sratte | Manufacturer: Sratte
See On Amazon #8
Megaware Self-Adhesive DIY Keel Guard - Prolongs The Life of Your Boat - Protects from Abrasive Sand, Rocks and Oyster Beds - 9 Kit Sizes - 5 Inches Wide (White)
Asin: B0009TS7SO | Model: 20107 | PartNumber: 20107 | Ean: 3665987053066, 0672057201060, 0014984005364, 0672057201077 | UPC: 672057201060, 014984005364, 672057201077
Superior Engineering - This Patented Hydrodynamic Drag Reduction Design Is Produced Using The Highest Quality Materials And 3M Premium Adhesives. Pliable And Tough, The 5-Inch Wide Boat Keel Protection Easily Conforms To Your Boat's Keel; It’S Shock Absorbing, Exclusive Contoured Edge Design, And Drag Reduction Channels Won't Slow Your Boat Down.
Lifetime Warranty - The Megaware Keelguard Is So Tough And Reliable That We Include A Lifetime Warranty During Normal Use Of Your Boat, For As Long As You Own Your Boat..
9 Standard Length Kits - Our Boat Keel Guard Comes In 9 Different Sizes That Range From 4 To 12 Feet Long To Ensure You Have The Correct Size; Shields Come In 12 Colors That Will Not Fade Or Dull While Enhancing The Look Of Your Boat. Note: If The Size Of Your Boat Falls Between 2 Sizes, Order A Size Up For Additional Keel Protection.
Easy To Install - The Boat Protector Features An Exclusive Self-Sealing Contoured Edge That Creates A Clean, Tight Seal; No Messy Sealants Needed. Easy Install In 4 Simple Steps; Etch, Clean, Prime, Apply!.
Features
- Boat Keel Protector - Protect your boat keel from sand, rocks, oyster beds, concrete ramps, and everyday wear and tear on the water with The Original Do-It-Yourself Keel Guard from Megaware. Note: compatible with fiberglass and some aluminum boats
- Easy to Install - The boat protector features an exclusive self-sealing contoured edge that creates a clean, tight seal; no messy sealants needed. Easy install in 4 simple steps; etch, clean, prime, apply!
- Superior Engineering - This patented hydrodynamic drag reduction design is produced using the highest quality materials and 3M premium adhesives. Pliable and tough, the 5-inch wide boat keel protection easily conforms to your boat's keel; it s shock absorbing, exclusive contoured edge design, and drag reduction channels won't slow your boat down
- 9 Standard Length Kits - Our boat keel guard comes in 9 different sizes that range from 4 to 12 feet long to ensure you have the correct size; shields come in 12 colors that will not fade or dull while enhancing the look of your boat. Note: if the size of your boat falls between 2 sizes, order a size up for additional keel protection
- Lifetime Warranty - The Megaware KeelGuard is so tough and reliable that we include a lifetime warranty during normal use of your boat, for as long as you own your boat.
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD
Dimensions: 0.25 x 84.00 x 5.00 Inches | Weight: 3.40 Pounds
Warranty: limited warranty
See On Amazon #9
2" Width X 4" V-Span Boat Trailer Bow Stop Non Marking Polyurethane Mounting Hole 1/2"
Asin: B0834PB41G | Model: 5781019 | PartNumber: 5781019 | Ean: 0664918905019 | UPC: 664918905019
Polyurethane Material Gives Our Bow Stop Long Lasting, Will Absorb Shock, Are Cut Resistant.
Will Not Mark Or Discolor Your Boat, Easy To Install, Safe And Convenient.
Extremely Tough, Designed Specifically For Heavier Boats.
Size: 2 Inch Width, 4 Inch V Span, 1/2 Inch Hole.
Features
- This Boat Trailer Bow Stop makes your Boat Away from being Hit and Scratched while you are loading your Boat on or off the Trailer
- Size: 2 inch width, 4 inch V span, 1/2 inch hole
- Polyurethane material gives our bow stop long lasting, will absorb shock, are cut resistant
- Extremely Tough, Designed Specifically for Heavier Boats
- Will not mark or discolor your boat, Easy to install, Safe and Convenient
- See more on Amazon...
Brand: Sailor | Manufacturer: Sailor
Dimensions: 1.97 x 3.90 x 2.95 inches | Weight: 169.00 Grams
See On Amazon #10
Dunzy 2 Pcs Stainless Steel Square Bow Guards That Need to Be Bend in Advance to Fit The Hull for Protection Boat (Notched Bow Style)
Asin: B0BDFP9KFW | Model: Dunzy-MX-0562 | PartNumber: Dunzy-MX-0562
Easy To Install: There Is Adhesive On The Back, Which Does Not Feel Sticky To The Touch In Winter, But Is Actually Very Strong When Attached To The Boat. Just Bend The Bow Guard In The Middle To Fit The Shape Of The Keel, Then Peel Off The Protective Film On The Back Of The Adhesive Bow Guard, Finally Attach The Guard To Targeted Position, Press It For A Few Seconds, No Other Tools Needed.
Appropriate Size To Use: The Boat Hull Protector Is Approx. 22.86 X 22.23 Cm/ 9 X 8.75 Inches, Suitable For Most Boats, Able To Bring You A Pleasant Using Experience.
Kind Tips: It's Recommended That You Dry And Wipe Target Position Before You Use The Boat Trailer Keel Pad, To Get A Better Result; The Pad Is Not Applicable To Boat Hulls That Have Multiple Curves And Many Protrusions.
Reliable Material For Lasting Service: The Bow Guard Adopts Quality 316 Stainless Steel And Mirror Polished, Compact And Sturdy In Structure, No Easy To Break Or Rust, Thus Can Serve You For A Long Time.
Features
- Nice Protection for Boat Hull: the boat trailer keel pad can cling tightly to the keel of your boat, reduce the direct friction and scratches of the paint caused by trailer, rock, ramp and more
- Reliable Material for Lasting Service: the bow guard adopts quality 316 stainless steel and mirror polished, compact and sturdy in structure, no easy to break or rust, thus can serve you for a long time
- Easy to Install: There is adhesive on the back, which does not feel sticky to the touch in winter, but is actually very strong when attached to the boat. Just bend the bow guard in the middle to fit the shape of the keel, then peel off the protective film on the back of the adhesive bow guard, finally attach the guard to targeted position, press it for a few seconds, no other tools needed
- Kind Tips: it's recommended that you dry and wipe target position before you use the boat trailer keel pad, to get a better result; The pad is not applicable to boat hulls that have multiple curves and many protrusions
- Appropriate Size to Use: the boat hull protector is approx. 22.86 x 22.23 cm/ 9 x 8.75 inches, suitable for most boats, able to bring you a pleasant using experience
- See more on Amazon...
Brand: Dunzy | Manufacturer: Dunzy
See On Amazon
Looking For Something Else?
Search