MECCANIXITY Carbon Fiber Rod, 1mm x 300mm Matte Pole Rod for RC Plane DIY Tool Wing Tube Quadcopter Arm, Pack of 10
Asin: B0CSM4ZLWX
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Great For Construction That Requires Great Strength Without Excess Weight; High Strength, Corrosion Resistance, Surface Smoothness, Straightness Good, Stable Performance; Its Specific Strength And Elastic Modulus Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum; It Has Good Electrical Conductivity And Very Good Tensile Strength..
Please Allow 1-5Mm Error Due To Manual Measurement..
Carbon Fiber Rods Perform Particularly Well In Bending Or Compression Applications. Can Be Cut To Any Length..
Material: Carbon Fiber;Diameter: 1Mm(0.04 Inch);Length: 300Mm(11.8 Inch);Pack Of 10Pcs X Carbon Fiber Round Rod;.
Features
- The carbon fiber rods are used for quadcopter helicopters, RC airplanes, scale models, railing, indoor kite making, repairing a graphite fishing pole, wing or tails reinforcing, 3D printers, arrow rods,DIY subject support poles, nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rod sand reinforcing for RC planes, etc.
- Material: Carbon Fiber;Diameter: 1mm(0.04 inch);Length: 300mm(11.8 inch);Pack of 10pcs x Carbon Fiber Round Rod;
- Great for construction that requires great strength without excess weight; High strength, corrosion resistance, surface smoothness, straightness good, stable performance; Its specific strength and elastic modulus are actually higher than carbon steel, yet it is lighter than aluminum; It has good electrical conductivity and very good tensile strength.
- Carbon fiber rods perform particularly well in bending or compression applications. can be cut to any length.
- Please allow 1-5mm error due to manual measurement.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY Carbon Fiber Rod 1mm
#1
MECCANIXITY Fiber Optic Rods PMMA 1mmx20cm for Sight Filament Red, Green, Orange 1 Set Pack of 5
Asin: B0B3S48BQV | Model: mea210922ee0161 | PartNumber: mea210922ee0161
The Replacement Optical Fiber Offer A Brightness Color For Your Sight, With Good Optical Conductivity And Flexible Enough..
The Principle Of The Optical Fiber Is The Good Light Guiding, Only In The Light, It Will Offer A Good Optic Transfer Performance..
Put The Fiber Cable Into The Sight Hole, Then Heating The End To Fixed, Final Sand The End To Finish..
Color: Fluorescence Red, Green, Orange; Fiber Diameter: 1 Mm / 0.04 Inch; Fiber Length: 20 Cm /7.87 Inch; Operation Temperature: 0 To 180 Fahrenheit; 1 Set - 2 X Red And 1 X Green And 2 X Orange Fiber Optic Rods..
Features
- The fiber optic bar is used for replacement of the broken sight or for trying a new color.
- Color: Fluorescence Red, Green, Orange; Fiber Diameter: 1 mm / 0.04 inch; Fiber Length: 20 cm /7.87 inch; Operation Temperature: 0 to 180 Fahrenheit; 1 Set - 2 x Red and 1 x Green and 2 x Orange Fiber Optic Rods.
- The replacement optical fiber offer a brightness color for your sight, with good optical conductivity and flexible enough.
- Put the fiber cable into the sight hole, then heating the end to fixed, final sand the end to finish.
- The principle of the optical fiber is the good light guiding, only in the light, it will offer a good optic transfer performance.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #2
Fielect 2mm Carbon Fiber Rod for RC Airplane Matte Pole Length 400mm 15.7 inch 10pcs
Asin: B083LC917H | Model: FLT20191202J-0119 | PartNumber: FLT20191202J-0119 | Ean: 0886527593757 | UPC: 886527593757
【Advantages】- Carbon Fiber Bar Is Vert Lightweight, Lighter Than Aluminum, Yet Stronger Than Steel..
【Package Content】- 10Pcs X Carbon Fiber Rod..
【Application】- Carbon Fiber Rod Are Suitable For Aviation Model Aircraft, Model Cars, Multi-Rotor Support Rods, Model Boats, Racing Cars, Robots, Diy Aircraft Production, 3D Printers, Arrow Rods, Kites, Windmills, Sails, Diy Subject Support Poles, Mosquito Nets, Tents, Bows, Hatches, Pcb Equipment Shafts, Luggage, Hand Rods..
【Features】- The Carbon Fiber Rod Has Good Heat Resistance, Corrosion, Rubbing Performance, High Strength, Stable And Surface Smoothness..
Features
- Dimension - Diameter: 2mm; Length: 400mm / 15.6 inch; Material: Carbon Fiber.
- Features - The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness.
- Advantages - Carbon fiber bar is vert lightweight, lighter than aluminum, yet stronger than steel.
- Application - Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods.
- Package Content - 10Pcs x Carbon Fiber Rod.
- See more on Amazon...
Brand: Fielect | Manufacturer: Fielect
See On Amazon #3
cncarbonfiber 4pcs 6.0mm Square Carbon Fiber Rods 6.0x6.0x420mm,Solid Carbon Fiber Square Tube(pultrusion) Side 6.0mm Length 420mm,1.42346mm Available
Asin: B09417J2Q5 | Model: carbon-square-rod6.0mm | PartNumber: carbon-square-rod6.0mm | Ean: 0735279176940 | UPC: 735279176940
Weight: 22.2G/Pcs.
Package:4 Pcs.
High Strength,Lightweight.
Side:6.0Mm; Length: 420Mm.
Features
- Material:100% carbon Fiber
- Side:6.0mm; Length: 420mm
- Weight: 22.2g/pcs
- High strength,lightweight
- Package:4 pcs
- See more on Amazon...
Brand: cncarbonfiber | Manufacturer: cncarbonfiber
See On Amazon #4
ARRIS 2mm Carbon Fiber Rod, 1.0mm 1.5mm 2.5mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm Available, Solid 3K Carbon Rod Bar 400mm Length 15.7inch for RC Airplane Repair DIY Craft, 5PCS
Asin: B09XHL86HB | Model: AD0010-5PCS | PartNumber: AD0010-5PCS
The Carbon Fiber Rod Has Good Heat Resistance, Corrosion, Rubbing Performance, High Strength, Stable And Surface Smoothness..
Application: Carbon Fiber Rod Are Suitable For Aviation Model Aircraft, Model Cars, Multi-Rotor Support Rods, Model Boats, Racing Cars, Robots, Diy Aircraft Production, 3D Printers, Arrow Rods, Kites, Windmills, Sails, Diy Subject Support Poles, Mosquito Nets, Tents, Bows, Hatches, Pcb Equipment Shafts, Luggage, Hand Rods..
Size: 2.0X400mm.
Features
- Features: Strong Strength and Light Weight
- Size: 2.0X400MM
- The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness.
- Application: Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods.
- See more on Amazon...
Brand: ARRIS | Manufacturer: Hobby Wing
See On Amazon #5
Carbon Fiber Rods 0.8mm Carbon Fiber Rods for RC Airplane DIY Craft 400mm Length Matte Pole 10PCS
Asin: B08H12ZBH6 | Model: CFR0.8 | PartNumber: CFR0.8 | Ean: 0788492194963 | UPC: 788492194963
Feature: Very Strong And Light ,High Conductivity..
Use: Camping Tent,Bed Net,Kite,Winnower,Toys,Rc Airplane,Golf Bag,Flag Pole,Curtain,Cases, Umbrella,Handbags,Bow And Arrow,Etc.
Size: Od 0.8*400Mm Carbon Fiber Rod.
Features
- 100% Carbon Fiber
- Size: Od 0.8*400mm carbon fiber rod
- Feature: Very strong and light ,high conductivity.
- Use: Camping Tent,bed net,kite,winnower,toys,rc airplane,golf bag,Flag pole,curtain,cases, umbrella,handbags,bow and arrow,Etc
- See more on Amazon...
Brand: LUKYO | Manufacturer: Carbon Fiber Supplier
See On Amazon #6
cncarbonfiber 2pcs 10mm Carbon Fiber Rods 10x420mm,10mm Solid Carbon Fiber Tube(pultrusion) Length 420mm 2pcs 10x420mm
Asin: B09CNTNBTR | Model: carbonrod-2p-10*420 | PartNumber: carbonrod-2p-10*420 | Ean: 0735279177701 | UPC: 735279177701
High Strength,Lightweight.
Package:2 Pcs.
Diameter:10.0Mm; Length: 420Mm.
Features
- Material:100% carbon Fiber
- Diameter:10.0mm; Length: 420mm
- High strength,lightweight
- Package:2 pcs
- See more on Amazon...
Brand: cncarbonfiber | Manufacturer: cncarbonfiber
See On Amazon #7
FANCYWING 200MMX 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 4.0MM 5.0MM 5 PCS Carbon Fiber Rod for RC Airplane DIY Craft 4mm Matte Pole 200mm
Asin: B09XHFR8G7 | Model: FW-AD0020-5PCS | PartNumber: FW-AD0020-5PCS
The Carbon Fiber Rod Has Good Heat Resistance, Corrosion, Rubbing Performance, High Strength, Stable And Surface Smoothness..
Application: Carbon Fiber Rod Are Suitable For Aviation Model Aircraft, Model Cars, Multi-Rotor Support Rods, Model Boats, Racing Cars, Robots, Diy Aircraft Production, 3D Printers, Arrow Rods, Kites, Windmills, Sails, Diy Subject Support Poles, Mosquito Nets, Tents, Bows, Hatches, Pcb Equipment Shafts, Luggage, Hand Rods..
Size: 4.0X200mm.
Features
- Features: Strong Strength and Light Weight
- Size: 4.0X200MM
- The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness.
- Application: Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods.
- See more on Amazon...
Brand: FANCYWING | Manufacturer: FANCYWING
Dimensions: 0.30 x 7.00 x 0.30 inches
See On Amazon #8
Fielect 6mm Carbon Fiber Rod for RC Airplane Matte Pole Length 400mm 15.7 inch 2pcs
Asin: B083L9P53G | Model: FLT20191202J-0131 | PartNumber: FLT20191202J-0131 | Ean: 0882527204938 | UPC: 882527204938
【Advantages】- Carbon Fiber Bar Is Vert Lightweight, Lighter Than Aluminum, Yet Stronger Than Steel..
【Package Content】- 2Pcs X Carbon Fiber Rod..
【Application】- Carbon Fiber Rod Are Suitable For Aviation Model Aircraft, Model Cars, Multi-Rotor Support Rods, Model Boats, Racing Cars, Robots, Diy Aircraft Production, 3D Printers, Arrow Rods, Kites, Windmills, Sails, Diy Subject Support Poles, Mosquito Nets, Tents, Bows, Hatches, Pcb Equipment Shafts, Luggage, Hand Rods..
【Features】- The Carbon Fiber Rod Has Good Heat Resistance, Corrosion, Rubbing Performance, High Strength, Stable And Surface Smoothness..
Features
- Dimension - Diameter: 6mm; Length: 400mm / 15.6 inch; Material: Carbon Fiber.
- Features - The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness.
- Advantages - Carbon fiber bar is vert lightweight, lighter than aluminum, yet stronger than steel.
- Application - Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods.
- Package Content - 2Pcs x Carbon Fiber Rod.
- See more on Amazon...
Brand: Fielect | Manufacturer: Fielect
See On Amazon #9
KARBXON Carbon Fiber Tube - 5mm X 3mm x 1000mm Pultruded Round Hollow Carbon Fiber rods Black Matte Finish - Pure Carbon Fibre Hollow Tube shafts - for RC Planes-Drones, Boat DIY Craft Projects
Asin: B09Q8CBJSY
Black Matte Finish.
High Strength Carbon Tubing.
Easy To Use And Modify Can Be Cut With Fine Tooth Blades.
1Mm - Carbon Fiber Wall Thickness.
Features
- 5mm x 3mm x 1000mm Carbon fiber tubes
- 1mm - Carbon fiber wall thickness
- Black matte finish
- Easy to use and modify can be cut with fine tooth blades
- High strength carbon tubing
- See more on Amazon...
Brand: KARBXON | Manufacturer: KARBXON
Dimensions: 0.20 x 39.37 x 0.20 Inches
See On Amazon #10
VictorsHome Carbon Fiber Rods 1.5mm x 300mm Solid Matte Round Bar for DIY Crafts RC Aircraft Model Car 10pcs
Asin: B0BPC55KNL
Performance - Carbon Fiber Rods Can Be Used To Replace Steel And Aluminum Rods. They Are Lighter Than Aluminum Rods And Have Better Strength Characteristics. They Perform Well In Bending And Axial Tension Or Compression Applications..
What You Get - 10Pcs X Carbon Fiber Rod. If You Have Any Questions About This Item, Please Feel Free To Contact Us!.
Applications - Suitable For The Construction Of Rc Airplanes, Model Helicopters, Model Ships, And Model Cars, Kite Making, 3D Printer And Other Diy Crafts. Widely Used In Aviation, Automobile, Model Aircraft, Sports Equipment, Handicraft And Other Industries..
Material - Carbon Fiber Rods Are Made By Pulling Continuous Carbon Fibers Mixed With Epoxy Resin At High Temperature, The Process Is Pultrusion. They Have High Axial Strength And Stiffness, High Corrosion Resistance, Smooth Surfaces And Flat Cut Surfaces..
Features
- SIZE - The carbon fiber rod is 1.5mm/0.06" in diameter, 300mm/11.8" in length.
- MATERIAL - Carbon fiber rods are made by pulling continuous carbon fibers mixed with epoxy resin at high temperature, the process is pultrusion. They have high axial strength and stiffness, high corrosion resistance, smooth surfaces and flat cut surfaces.
- PERFORMANCE - Carbon fiber rods can be used to replace steel and aluminum rods. They are lighter than aluminum rods and have better strength characteristics. They perform well in bending and axial tension or compression applications.
- APPLICATIONS - Suitable for the construction of RC airplanes, model helicopters, model ships, and model cars, kite making, 3D printer and other DIY crafts. Widely used in aviation, automobile, model aircraft, sports equipment, handicraft and other industries.
- WHAT YOU GET - 10pcs x Carbon Fiber Rod. If you have any questions about this item, please feel free to contact us!
- See more on Amazon...
Brand: VictorsHome | Manufacturer: VictorsHome
Dimensions: 0.08 x 11.81 x 0.59 inches
See On Amazon #11
uxcell Carbon Fiber Strip Bars 1x3mm 200mm Length Pultruded Carbon Fiber Strips for Kites, RC Airplane 5 Pcs
Asin: B07QYB157R | Model: a19032000ux0434 | PartNumber: a19032000ux0434
Lightweight. Strong As Metal But Only One Fifth In Weight. Corrosion-Resistant And Heat-Resisting..
Application. Pultruded Carbon Fiber Strip Bar Is Used For Racing Drones, Rc Helicopter Wing, Rc Airplanes And Rc Sailboats, Kite Spars..
Smooth Surface. Made From High Tensile And Modulus Unidirectional Carbon Fiber, With Polishing Finish..
Pultrusion. Pultruded Strip Means That All The Fibers Are In One Direction, Which Makes It Stronger Than The Intension Of Woven Tube.
Features
- Size. 1mm in thickness, 3mm width and 200mm overall length. The cross-section of this bar is round edge flat.
- Pultrusion. Pultruded strip means that all the fibers are in one direction, which makes it stronger than the intension of woven tube
- Lightweight. Strong as metal but only one fifth in weight. Corrosion-resistant and heat-resisting.
- Smooth surface. Made from high tensile and modulus unidirectional carbon fiber, with polishing finish.
- Application. Pultruded carbon fiber strip bar is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
SLAIR 4mm OD Carbon Fiber Rod for RC Airplane Matte Pole, 400mm 15.7 inch, 5 Pack
Asin: B09QHHZJ37 | Model: SL-4mm carbon rod | PartNumber: SL-4mm carbon rod | Ean: 0750226936972 | UPC: 750226936972
Characteristics: Lighter Than Aluminum, But Stronger Than Steel.
Warranty: 6 Months.
Material And Size: Carbon Fiber Material; Od 4Mm; Length 15.7 Inch.
Carbon Fiber Rod Has Super Mechanical Properties , Good Heat Resistance, Never Corrosion.
Features
- Carbon fiber rod widely used in stunt kites, robotics,mechanical equipment, as well as R/C cars and helicopters
- Carbon fiber rod has super mechanical properties , good heat resistance, never corrosion
- Characteristics: Lighter than aluminum, but stronger than steel
- Material and Size: Carbon Fiber Material; OD 4mm; Length 15.7 Inch
- Warranty: 6 months
- See more on Amazon...
Brand: SLAIR | Manufacturer: SL-AIR
See On Amazon #13
uxcell Carbon Fiber Rod for RC Airplane DIY Craft 1mm Matte Pole 400mm 15.7 Inch, 10pcs
Asin: B07PB3VHTR | Model: a19011900ux0016 | PartNumber: a19011900ux0016
Corrosion Resistance, Anti-Aging, And Long Service Life..
They Are Superior To Other Metals In The Field Of Corrosion Protection And Have Good Water Resistance And Aging Resistance, So In Corrosive Environments..
Carbon Fiber Products Are Resistant To Acids, Salts, Some Organic Solvents, And Other Corrosive Resistance..
Lightweight And High Strength. Therefore, Lightweight And High Strength Are The Distinctive Features Of Carbon Fiber Composites..
Features
- PARAMETER - Material: Carbon Fiber; Diameter: 1mm; Length: 400mm / 15.7 inch.
- Lightweight and high strength. Therefore, lightweight and high strength are the distinctive features of carbon fiber composites.
- Corrosion resistance, anti-aging, and long service life.
- Carbon fiber products are resistant to acids, salts, some organic solvents, and other corrosive resistance.
- They are superior to other metals in the field of corrosion protection and have good water resistance and aging resistance, so in corrosive environments.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 16.14 x 0.39 x 0.39 inches
See On Amazon #14
Carbon Fiber Rods 4mm Carbon Fiber Rods 400X4mm Carbon Fiber Rod for RC Airplane DIY Craft 3D Printer Matte Pole 10PCS
Asin: B098TLPMBY | Model: CFR4 | PartNumber: CFR4 | Ean: 0751965335446 | UPC: 751965335446
Corrosion Resistance, Anti-Aging, And Long Service Life..
Use: Camping Tent,Bed Net,Kite,Winnower,Toys,Rc Airplane,Golf Bag,Flag Pole,Curtain,Cases, Umbrella,Handbags,Bow And Arrow,Etc.
Feature: Very Strong And Light ,High Conductivity..
Features
- Full Carbon Fiber Rods
- Feature: Very strong and light ,high conductivity.
- Corrosion resistance, anti-aging, and long service life.
- Use: Camping Tent,bed net,kite,winnower,toys,rc airplane,golf bag,Flag pole,curtain,cases, umbrella,handbags,bow and arrow,Etc
- See more on Amazon...
Brand: LUKYO | Manufacturer: Carbon Fiber Supplier
Dimensions: 15.75 x 0.16 x 0.16 Inches
See On Amazon #15
MECCANIXITY Carbon Fiber Rod, 1mm x 300mm Carbon Rod Bar for RC Plane DIY Craft Kite Wing Tube Quadcopter Arm Repair Pack of 8
Asin: B0CXHRP4CR
Great For Construction That Requires Great Strength Without Excess Weight; High Strength, Corrosion Resistance, Surface Smoothness, Straightness Good, Stable Performance; Its Specific Strength And Elastic Modulus Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum; It Has Good Electrical Conductivity And Very Good Tensile Strength..
All The Sizes Are Measured By Manually, Please Allow A +/-0.1 Inch Error..
Carbon Fiber Rods Perform Particularly Well In Bending Or Compression Applications. Can Be Cut To Any Length..
Material: Carbon Fiber;Diameter: 1Mm/0.04Inch;Length: 300Mm/11.81Inch;In The Package: 8Pcs X Carbon Fiber Round Rod..
Features
- The carbon fiber rods are used for quadcopter helicopters, RC airplanes, scale models, railing, indoor kite making, repairing a graphite fishing pole, wing or tails reinforcing, and reinforcing for RC planes, etc.
- Material: Carbon Fiber;Diameter: 1mm/0.04inch;Length: 300mm/11.81inch;In the package: 8Pcs x Carbon Fiber Round Rod.
- Great for construction that requires great strength without excess weight; High strength, corrosion resistance, surface smoothness, straightness good, stable performance; Its specific strength and elastic modulus are actually higher than carbon steel, yet it is lighter than aluminum; It has good electrical conductivity and very good tensile strength.
- Carbon fiber rods perform particularly well in bending or compression applications. can be cut to any length.
- All the sizes are measured by manually, please allow a +/-0.1 inch error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #16
MECCANIXITY Carbon Fiber Rod, 6mm x 300mm Carbon Rod Bar for RC Airplane DIY Craft Kite Wing Tube Quadcopter Arm Repair Pack of 4
Asin: B0CXPDWHFT
Great For Construction That Requires Great Strength Without Excess Weight; High Strength, Corrosion Resistance, Surface Smoothness, Straightness Good, Stable Performance; Its Specific Strength And Elastic Modulus Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum; It Has Good Electrical Conductivity And Very Good Tensile Strength..
All The Sizes Are Measured By Manually, Please Allow A +/-0.1 Inch Error..
Carbon Fiber Rods Perform Particularly Well In Bending Or Compression Applications. Can Be Cut To Any Length..
Material: Carbon Fiber; Diameter: 6Mm/0.24Inch; Length: 300Mm/11.81Inch; In The Package: 4Pcs X Carbon Fiber Round Rod..
Features
- The carbon fiber rods are used for quadcopter helicopters, RC airplanes, scale models, railing, indoor kite making, repairing a graphite fishing pole, wing or tails reinforcing, and reinforcing for RC planes, etc.
- Material: Carbon Fiber; Diameter: 6mm/0.24inch; Length: 300mm/11.81inch; In the package: 4Pcs x Carbon Fiber Round Rod.
- Great for construction that requires great strength without excess weight; High strength, corrosion resistance, surface smoothness, straightness good, stable performance; Its specific strength and elastic modulus are actually higher than carbon steel, yet it is lighter than aluminum; It has good electrical conductivity and very good tensile strength.
- Carbon fiber rods perform particularly well in bending or compression applications. can be cut to any length.
- All the sizes are measured by manually, please allow a +/-0.1 inch error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #17
MECCANIXITY 8 Pcs Carbon Fiber Strip 1x3mm 200mm Length Pultruded Flat Carbon Fiber Bars for Kites, RC Airplane
Asin: B0CRTZLCMQ
The Pultrusion Process Ensures That All The Fibers Are Aligned In One Direction, Making It Stronger Than Woven Tubes;Despite Its Strength, This Carbon Fiber Strip Bar Is Only One-Fifth The Weight Of Metal Alternatives, Offering Enhanced Performance;It Exhibits Excellent Resistance To Corrosion And Can Withstand High Temperatures, Ensuring Long-Lasting Performance Even In Challenging Environments..
When Using This Product, It Is Important To Consider The Dimensions To Ensure It Fits Your Specific Application. Additionally, Handle The Strip Bar With Care To Prevent Any Damage To The Smooth Surface. As With Any Carbon Fiber Product, Avoid Exposing It To Excessive Bending Or Impact That Could Affect Its Structural Integrity..
This Carbon Fiber Strip Bar Is Versatile And Can Be Used In Multiple Applications.It Can Be Used To Build Drone Frames, Reinforce Rc Helicopter Wings, Build Lightweight Rc Airplanes, Strengthen Rc Sailboats, And Create Durable Kite Spars. Its High Strength-To-Weight Ratio Makes It A Good Choice For Projects Where Strength, And Rigidity Are Required..
8 X Carbon Fiber Strip;Length X Thickness X Width : 200X1x3mm;Color:Black;.
Features
- This product is a pultruded carbon fiber strip bar, designed for use in various applications such as racing drones, RC helicopters, airplanes, sailboats, and kite spars.
- 8 x Carbon Fiber Strip;Length x Thickness x Width : 200x1x3mm;Color:Black;
- The pultrusion process ensures that all the fibers are aligned in one direction, making it stronger than woven tubes;Despite its strength, this carbon fiber strip bar is only one-fifth the weight of metal alternatives, offering enhanced performance;It exhibits excellent resistance to corrosion and can withstand high temperatures, ensuring long-lasting performance even in challenging environments.
- This carbon fiber strip bar is versatile and can be used in multiple applications.It can be used to build drone frames, reinforce RC helicopter wings, build lightweight RC airplanes, strengthen RC sailboats, and create durable kite spars. Its high strength-to-weight ratio makes it a good choice for projects where strength, and rigidity are required.
- When using this product, it is important to consider the dimensions to ensure it fits your specific application. Additionally, handle the strip bar with care to prevent any damage to the smooth surface. As with any carbon fiber product, avoid exposing it to excessive bending or impact that could affect its structural integrity.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #18
VictorsHome Carbon Fiber Rods 1mm x 200mm Solid Matte Round Bar for DIY Crafts RC Aircraft Model Car 10pcs
Asin: B0BPC8HF47
Performance - Carbon Fiber Rods Can Be Used To Replace Steel And Aluminum Rods. They Are Lighter Than Aluminum Rods And Have Better Strength Characteristics. They Perform Well In Bending And Axial Tension Or Compression Applications..
What You Get - 10Pcs X Carbon Fiber Rod. If You Have Any Questions About This Item, Please Feel Free To Contact Us!.
Applications - Suitable For The Construction Of Rc Airplanes, Model Helicopters, Model Ships, And Model Cars, Kite Making, 3D Printer And Other Diy Crafts. Widely Used In Aviation, Automobile, Model Aircraft, Sports Equipment, Handicraft And Other Industries..
Material - Carbon Fiber Rods Are Made By Pulling Continuous Carbon Fibers Mixed With Epoxy Resin At High Temperature, The Process Is Pultrusion. They Have High Axial Strength And Stiffness, High Corrosion Resistance, Smooth Surfaces And Flat Cut Surfaces..
Features
- SIZE - The carbon fiber rod is 1mm/0.039" in diameter, 200mm/7.9" in length.
- MATERIAL - Carbon fiber rods are made by pulling continuous carbon fibers mixed with epoxy resin at high temperature, the process is pultrusion. They have high axial strength and stiffness, high corrosion resistance, smooth surfaces and flat cut surfaces.
- PERFORMANCE - Carbon fiber rods can be used to replace steel and aluminum rods. They are lighter than aluminum rods and have better strength characteristics. They perform well in bending and axial tension or compression applications.
- APPLICATIONS - Suitable for the construction of RC airplanes, model helicopters, model ships, and model cars, kite making, 3D printer and other DIY crafts. Widely used in aviation, automobile, model aircraft, sports equipment, handicraft and other industries.
- WHAT YOU GET - 10pcs x Carbon Fiber Rod. If you have any questions about this item, please feel free to contact us!
- See more on Amazon...
Brand: VictorsHome | Manufacturer: VictorsHome
Dimensions: 0.04 x 7.87 x 0.39 inches
See On Amazon #19
MECCANIXITY Carbon Fiber Rod, 4mm x 100mm for RC Plane DIY Tool Wing Tube Quadcopter Arm, Pack of 15
Asin: B0CSKG4MZ6
Great For Construction That Requires Great Strength Without Excess Weight; High Strength, Corrosion Resistance, Surface Smoothness, Straightness Good, Stable Performance; Its Specific Strength And Elastic Modulus Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum; It Has Good Electrical Conductivity And Very Good Tensile Strength..
Please Allow 1-2Mm Error Due To Manual Measurement..
Carbon Fiber Rods Perform Particularly Well In Bending Or Compression Applications. Can Be Cut To Any Length..
Material: Carbon Fiber;Diameter: 4Mm(0.16 Inch);Length: 100Mm(3.9 Inch);Pack Of 15Pcsx Carbon Fiber Round Rod;.
Features
- The carbon fiber rods are used for quadcopter helicopters, RC airplanes, scale models, railing, indoor kite making, repairing a graphite fishing pole, wing or tails reinforcing, 3D printers, arrow rods,DIY subject support poles, nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rod sand reinforcing for RC planes, etc.
- Material: Carbon Fiber;Diameter: 4mm(0.16 inch);Length: 100mm(3.9 inch);Pack of 15Pcsx Carbon Fiber Round Rod;
- Great for construction that requires great strength without excess weight; High strength, corrosion resistance, surface smoothness, straightness good, stable performance; Its specific strength and elastic modulus are actually higher than carbon steel, yet it is lighter than aluminum; It has good electrical conductivity and very good tensile strength.
- Carbon fiber rods perform particularly well in bending or compression applications. can be cut to any length.
- Please allow 1-2mm error due to manual measurement.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #20
CGjiogujio 10pcs Diameter 0.5mm-1.0mm Long 333mm(13") Carbon Fiber Rods Pole Assortment Kit
Asin: B08CXDTBKD | Model: 0.5mm-1.0mm x 333mm(13") | PartNumber: 0.5mm-1.0mm x 333mm(13") | Ean: 0769135409064 | UPC: 769135409064
Length: 333Mm(13").
Package Include: 2 X 0.5Mm Carbon Fiber Rod, 2 X 0.6Mm Carbon Fiber Rod, 2 X 0.8Mm Carbon Fiber Rod, 2 X 0.9Mm Carbon Fiber Rod, 2 X 1.0Mm Carbon Fiber Rod..
Diameter: 0.5Mm 0.6Mm 0.8Mm 0.9Mm 1.0Mm.
Features
- Material: carbon fiber
- Diameter: 0.5mm 0.6mm 0.8mm 0.9mm 1.0mm
- Length: 333mm(13)
- Package include: 2 x 0.5mm Carbon fiber rod, 2 x 0.6mm Carbon fiber rod, 2 x 0.8mm Carbon fiber rod, 2 x 0.9mm Carbon fiber rod, 2 x 1.0mm Carbon fiber rod.
- See more on Amazon...
Brand: CGjiogujio | Manufacturer: CGjiogujio
See On Amazon
Looking For Something Else?
Search