YOOPAI Double-Sided PEI Build Plate Platform 257 * 257mm for 3D Printer Bambulab A1 P1S P1P X1 X1C
Asin: B0CSMXGNDB | Model: Double PEI 257-Black | PartNumber: Double PEI 257-Black | Ean: 0850055848948 | UPC: 850055848948
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Simple Set-Up: The Build Plate Consists Of Just One Parts - A Flexible Steel Platform With Double Sided Pei Coating. Since The Hotbed Of The Bambu Lab Printers Is Built-In Magnet, Simply Affix The Pei Platform To The Hotbed For Instant Printing Without Any Complex Setup Procedures..
Compatible 3D Prenter Models: With A Size Of 257*257 Mm (10.12*10.12 Inch), This Build Plate Is Compatible With Bambu Lab A1, X1, X1c, P1p, P1s And X1-Carbon Combo. Please Confirm Your Printer Model Before Purchasing. After Installation, Please Ensure To Re-Level The Print Bed To Enhance The Printing Quality..
Effortless Removal: This 3D Printer Bed Can Endure The Repeated Heating Cycles That Occur During 3D Printing. Its Flexible Surface Allows For Easy Removal Of Prints Once The Heated Bed Cools Down To Room Temperature. If A Print Still Sticks, Just Detach The Upper Magnetic Surface, Flex The Flexible Surface, And Watch The Model Easily Detach And Land In Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Is Built To Withstand The Demanding Conditions Of Continuous Printing Operations. The Pei Surface Accommodates Most Filaments Including Pla, Abs, Petg, Tpu, And Nylon. By Investing In This Dual-Sided Bed, You Will Gain Two Double The Usage Time, Making It A Cost-Effective Choice..
Features
- Excellent Adhesion: Each YOOPAI PEI+PEO sheet is equipped with two sides of textured PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to the filaments of corresponding materials, allowing you to choose the appropriate side based on your printing requirements.
- Reliable and Cost-effective: This 3D printer bed is built to withstand the demanding conditions of continuous printing operations. The PEI surface accommodates most filaments including PLA, ABS, PETG, TPU, and Nylon. By investing in this dual-sided bed, you will gain two double the usage time, making it a cost-effective choice.
- Simple Set-up: The build plate consists of just one parts - a flexible steel platform with double sided PEI coating. Since the hotbed of the Bambu Lab printers is built-in magnet, simply affix the PEI platform to the hotbed for instant printing without any complex setup procedures.
- Effortless Removal: This 3D printer bed can endure the repeated heating cycles that occur during 3D printing. Its flexible surface allows for easy removal of prints once the heated bed cools down to room temperature. If a print still sticks, just detach the upper magnetic surface, flex the flexible surface, and watch the model easily detach and land in your hands.
- Compatible 3D Prenter Models: With a size of 257*257 mm (10.12*10.12 inch), this build plate is compatible with Bambu Lab A1, X1, X1C, P1P, P1S and X1-Carbon Combo. Please confirm your printer model before purchasing. After installation, please ensure to re-level the print bed to enhance the printing quality.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 0.10 x 6.18 x 10.12 inches
See On Amazon Similar To YOOPAI DoubleSided PEI Build Plate
#1
Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm
Asin: B07RD6D2ZQ | Model: Dawnblade190503 | PartNumber: Dawnblade190503 | Ean: 0745679683719 | UPC: 745679683719
Excellent Flatness - Improved 3D Printer Glass Plate Provides More Flat And More Smooth Build Surface Than Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Model..
Compatibility - The 3D Printer Parts Is Applicable With Creality 3D Printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro And Cr-20, Cr-20 Pro, Pls Confirm If This Borosilicate Glass Bed Compatible With Your Printer..
Super Convenient - Very Easy To Take Off The Model, No Tools Needed. This Borosilicate Glass Bed Could Be Fixed With Middle Sized Clips And Cleaned With Alcohol Or Acetone At Room Temperature..
No-Indentation Printing - Upgraded Ender 3 Glass Plate Has A Much Smaller Creality Logo Than Older Version, Avoiding Leaving Logo Indentations On Molds Surface During 3D Printing..
Features
- No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
- No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
- Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
- Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
- Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.
- See more on Amazon...
Brand: Dawnblade | Manufacturer: Dawnblade
Dimensions: 0.16 x 9.25 x 9.25 inches
See On Amazon #2
Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Asin: B0CRDS6PRR
Strong Magnetic Force - The Pei Sheet 235X235mm Is Selection Of Strong Magnetic Paste, High Temperature Can Still Maintain A High Degree Of Magnetism, To Ensure The Stability Of Printing. The Ender 3 V3 Se Build Plateis Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print, It Can Print With Most Filaments, Such As Pla / Abs / Asa / Petg / Tpu / Nylon / Pa / Pc..
Wide Compatibility - The Pei Sheet 235X235mm And Peo Smooth Surface Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality K1c/K1/Ender 3 V3/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer..
Positioning Holes Design - Double Handles + Positioning Holes Design, Precise Positioning, Easy And Simple Installation. The Pei Spring Steel 235X235mm Makes The Prints Easy To Adhere To The Printing Surface, And It Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Excellent Flatness - The Ender 3 V3 Ke Pei Magnetic Heated Bed Provides The High Flatness Spring Steel, Ensuring The Model Can Be Firmly Attached To The Surface Of The Print Platform, Can Be Repeated Bending Without Deformation, Easy To Take The Model..
Features
- Premium Quality PEI Coating - The Creality K1 PEI Spring Steel 235x235mm is made of High temperature resistant PEI coating on the surface, high abrasion resistance and high strength frosted texture, the PEI build surface is not easy to scratch.
- Excellent Flatness - The Ender 3 V3 KE PEI Magnetic Heated Bed provides the high flatness spring steel, ensuring the model can be firmly attached to the surface of the print platform, can be repeated bending without deformation, easy to take the model.
- Strong Magnetic Force - The PEI Sheet 235x235mm is selection of strong magnetic paste, high temperature can still maintain a high degree of magnetism, to ensure the stability of printing. The ender 3 V3 SE Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC.
- Positioning Holes Design - Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- Wide Compatibility - The PEI sheet 235x235mm and PEO smooth surface is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality K1C/K1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
Official Creality Ender 3 V3 SE Build Plate, Original PEI 3D Printer Platform Kit 235x235mm Flexible Spring Steel Texture Surface Print Bed for Ender 3/3 S1/3S1 Pro/3 Neo/3 V2 Neo/3 V3 KE/3 V3/K1/K1C
Asin: B0CJTXJT24
【Great Adhesion More Stable】A Distinctive Frosted Feel Given By The Special Rough Frosted Surface Of The Plate. Higher Adhesion Of Models, Not Easy To Warp While Firmly Locks Creativity During The Printing Process..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】235*235Mm Spring Steel Build Plate 3D Printer Bed Compatible With Ender 3/ Ender 3 V2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/3V3 Cr 10 Se/K1/K1c And Other Same-Sized Beds. After Replacing The Printing Bed, Please Level The Bed Again For Better Printing Results..
【Easy To Remove Printed Models】Easy To Remove The Prints Without Tools, Just Take Out The Spring Steel Plate And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
Features
- Quality Assurance 100% Official Creality Ender 3 V3 SE build plate, original 235*235mm spring steel removable flexible textured heated bed platform. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Easy to Remove Printed Models Easy to remove the prints without tools, just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- Great Adhesion More Stable A distinctive frosted feel given by the special rough frosted surface of the plate. Higher adhesion of models, not easy to warp while firmly locks creativity during the printing process.
- Wide Application 235*235mm spring steel build plate 3d printer bed compatible with Ender 3/ Ender 3 v2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/3V3 CR 10 SE/K1/K1C and other same-sized beds. After replacing the printing bed, please level the bed again for better printing results.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.07 x 9.29 x 9.29 inches | Weight: 0.66 pounds
See On Amazon #4
3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/5
Asin: B07FQWTZ3Y | Ean: 0649910300666 | UPC: 649910300666
Compatible With Abs, Pla, Hips, And Another Filament. Works With All Fdm Printer Models..
Durable Construction Allows For Multiple Uses With Either The Same Or Different Filament Materials..
Single Sheet Design Installs More Quickly And With Fewer Bubbles Than Tape Or Films..
Build Sheet Adheres To The Hot Bed To Help The Filament Stuck During Printing, While Also Helping Remove The Printed Model Afterward..
Features
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward.
- Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.30 x 9.25 x 9.25 inches
See On Amazon #5
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #6
PEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Asin: B0C4QBC1ZR | Model: PEI-0509 | PartNumber: PEI-0509 | Ean: 0795847035284 | UPC: 795847035284
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
See On Amazon #7
ELEGOO 235x235mm PEI Sheet Magnetic Build Plate, PEI Spring Steel Flexible Platform with Adhesive Bed for Neptune 3 Pro 3D Printer
Asin: B0C8NXD22S
Easy To Install - Only Need To Put The Magnetic Bottom Sheet Onto Your Heated Bed. The Steel Platform With Pei Surface Is On The Top. No More Mess.
High Compatibility - Not Only Compatible With Elegoo Neptune 3 Pro, But Also Fit Most Fdm 3D Printers With 235X235mm Bed.
Easy To Remove Prints - Elegoo Build Plate Is Flexible Enough To Remove Your Prints Simply By Bending The Plate Without Losing Durability.
Excellent Adhesion - The Powder-Coated Pei Plate Is Heat-Resistant. It Ensures Great Bed Adhesion When Printing And Make Prints Not Easy To Warp.
Features
- Original Spare Part - ELEGOO flexible magnetic build plate with sprayed one-sided PEI coating, size 235x235mm/9.25 x9.25
- Excellent Adhesion - The powder-coated PEI plate is heat-resistant. It ensures great bed adhesion when printing and make prints not easy to warp
- Easy to Install - only need to put the magnetic bottom sheet onto your heated bed. The steel platform with PEI surface is on the top. No more mess
- Easy to Remove Prints - ELEGOO build plate is flexible enough to remove your prints simply by bending the plate without losing durability
- High Compatibility - Not only compatible with ELEGOO Neptune 3 Pro, but also fit most FDM 3D printers with 235x235mm bed
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #8
Creality Ender 3 S1 Pro Build Plate, Original PEI Print Platform Kit Magnetic Flexible Spring Steel Texture Surface for Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/3 Neo/3V2 Neo K1/K1C 235x235mm
Asin: B0BBMKLG86 | Model: 3d-s1pro-pei | PartNumber: 3d-s1pro-pei
【Great Adhesion】Print Molds Onto Pei Build Plate Frosted Texture Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Easy Take Models】Easy To Remove The Prints Just Take Out The Build Plate Surface And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
【Wide Application】Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Spring Steel Sheet 3D Printer Bed Works Well With Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/Cp-01/Cr-20/Cr20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c And Other Same-Sized Beds..
Features
- Quality Assurance Made of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The design of the positioning hole makes the PEI Sheet installation more convenient.
- Wide Application Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm spring steel sheet 3d printer bed works well with Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C and other same-sized beds.
- Great Adhesion Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.
- Easy Take Models Easy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #9
YOOPAI Double-Sided PEI Sheet and Flexible Magnetic Build Plate Kit, 235x235mm 3D Printer Bed Platform for Creality K1/Ender 5 S1/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 Pro/Ender 3 Neo, Gold
Asin: B0C2HNZWTG | Model: DB-PEI-Black | PartNumber: DB-PEI-Black | Ean: 0850055848238 | UPC: 850055848238
Simple Set-Up: Our Pei Sheet Has Two Parts, A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive On The Back. Simply Attach The Magnetic Base Plate To The Printer's Hot Bed And Adsorb The Pei Bottom To Start Printing Immediately..
Wide Application: The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro,Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers..
Great Removal: Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Flexible And Easily Removed. When The Temperature Of The Heated Bed Reaches Room Temperature, Prints Come Off The Surface Easily. If The Print Is Still Stuck, Just Remove The Upper Magnetic Surface From The Lower One, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Can Handle The Tough Conditions Of 24/7 Printing With The Ultra-High Temperature Of Up To 120°C, Making It Perfect For Materials Like Pla, Petg, Abs, Tpu, Asa, Nylon, And Pc. Both Sides Of The Pei Sheet Can Be Printed, Pay Once And Get Twice The Usage Time..
Features
- Excellent Adhesion: Each Yoopai PEI sheet has two sides, both are textured. You can print directly on each side of the PEI sheet without using any glue or other tools to help the model to stick onto the sheet. Both sides have strong adhesion to various filaments, just choose either side for printing according to your needs.
- Reliable and Cost-effective: This 3D printer bed can handle the tough conditions of 24/7 printing with the ultra-high temperature of up to 120 C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and PC. Both sides of the PEI sheet can be printed, pay once and get twice the usage time.
- Simple Set-up: Our PEI Sheet has two parts, a flexible steel platform and a magnetic bottom sheet with adhesive on the back. Simply attach the magnetic base plate to the printer's hot bed and adsorb the PEI bottom to start printing immediately.
- Great Removal: Withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is flexible and easily removed. When the temperature of the heated bed reaches room temperature, prints come off the surface easily. If the print is still stuck, just remove the upper magnetic surface from the lower one, bend the flexible surface and watch the model fall right into your hands.
- Wide Application: The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. It is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 pro,Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.
- See more on Amazon...
First Available: 02/10/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 9.25 x 0.16 x 9.25 inches
Warranty: 1 year garantie
See On Amazon #10
Creality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro and All 235 * 235mm Size 3D Printer
Asin: B0BRQ7LRNC | Model: CR-PEI0105 | PartNumber: CR-PEI0105 | Ean: 0783970029119 | UPC: 783970029119
【Easy Model Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Excellent Adhesion】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well..
Features
- Creality Official Creality Official Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well.
- Easy Model Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- Wide Application The size of ender 3 PEI is 235*235mm 9.25*9.25inch). please re-level it to improve the printing effect. it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Weight: 1.39 Pounds
See On Amazon #11
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #12
Creality Original Ultra-Flexible Removable Magnetic Build Surface Heated Bed Cover for Ender 3 V2 Neo/ pro/ S1/Ender 5 3D Printer 235X235MM
Asin: B07HNWSMXY | Model: Ender 3-Magnetic | PartNumber: Ender 3-Magnetic | Ean: 0667797511685 | UPC: 667797511685
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Ender | Manufacturer: Creality 3D
See On Amazon #13
Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235X235MM
Asin: B084YSZFXL | Model: MBE3 | PartNumber: MBE3 | Ean: 8414858708049
Easy To Install: Magnetic Bed Comes With Upper Matte Magnetic Build Plate And Lower Magnetic Adhesive Build Plate. Post The Lower Adhesive Plate On Printing Platform, Make The Upper Magnetic One Match Well With It, Then You Can Start Print..
Note: If The Two Parts Of The Magnetic Bed Fail To Adsorb, Please Rotate It 90 Degrees And Try Again. Do Not Use Acetone To Wipe Off Thin Layers Left From Prints. Please Feel Free To Contact Us If You Have Any Problem, We Will Try Our Best To Help You..
Universal: With 235Mm X 235Mm Size, This 3D Printer Kit Is Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds. Applicable Materials: Pla, Tpu, Nylon Etc, Not For Pla +, Not Recommended For Printing Abs Filaments..
Excellent Performance: This Magnetic Bed Has Strong Flexibility And Heat Resistance Up To 70 ℃ Without Degauss. Wear-Resistant, Scratch-Resistant, Stain-Resistant, Hand-Sweat Resistant, Can Be Used Repeatedly..
Features
- Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
- Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- Easy to Install: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
- Universal: With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon etc, not for PLA +, not recommended for printing ABS filaments.
- Note: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #14
YOOPAI Double-Sided PEI+PEO Build Plate for Bambu Lab 3D Printer, 257x257mm 3D Printer Bed for Bambu Lab A1 X1 X1C/P1P/P1S 3D Printers
Asin: B0CNP6MP7J | Model: PEI+PEO-257-BK | PartNumber: PEI+PEO-257-BK | Ean: 0850055848252 | UPC: 850055848252
Simple Set-Up: The Build Plate Consists Of Just One Parts - A Flexible Steel Platform With Double Sided Pei+Peo Coating. Since The Hotbed Of The Bambu Lab Printers Is Built-In Magnet, Simply Affix The Pei+Peo Platform To The Hotbed For Instant Printing Without Any Complex Setup Procedures..
Compatible 3D Prenter Models: With A Size Of 257*257 Mm (10.12*10.12 Inch), This Build Plate Is Compatible With Bambu Lab A1, X1, X1c, P1p, P1s And X1-Carbon Combo. Please Confirm Your Printer Model Before Purchasing. After Installation, Please Ensure To Re-Level The Print Bed To Enhance The Printing Quality..
Effortless Removal: This 3D Printer Bed Can Endure The Repeated Heating Cycles That Occur During 3D Printing. Its Flexible Surface Allows For Easy Removal Of Prints Once The Heated Bed Cools Down To Room Temperature. If A Print Still Sticks, Just Detach The Upper Magnetic Surface, Flex The Flexible Surface, And Watch The Model Easily Detach And Land In Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Is Built To Withstand The Demanding Conditions Of Continuous Printing Operations. The Peo Surface Is Perfect For Printing Pla, Tpu, Petg Filaments, While The Pei Surface Accommodates Most Filaments Including Pla, Abs, Petg, Tpu, And Nylon. By Investing In This Dual-Sided Bed, You Not Only Gain Two Different Printing Effects But Also Double The Usage Time, Making It A Cost-Effective Choice..
Features
- Excellent Adhesion: Each YOOPAI PEI+PEO sheet is equipped with two sides - one diamond textured PEO coating and one smooth PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to the filaments of corresponding materials, allowing you to choose the appropriate side based on your printing requirements.
- Reliable and Cost-effective: This 3D printer bed is built to withstand the demanding conditions of continuous printing operations. The PEO surface is perfect for printing PLA, TPU, PETG filaments, while the PEI surface accommodates most filaments including PLA, ABS, PETG, TPU, and Nylon. By investing in this dual-sided bed, you not only gain two different printing effects but also double the usage time, making it a cost-effective choice.
- Simple Set-up: The build plate consists of just one parts - a flexible steel platform with double sided PEI+PEO coating. Since the hotbed of the Bambu Lab printers is built-in magnet, simply affix the PEI+PEO platform to the hotbed for instant printing without any complex setup procedures.
- Effortless Removal: This 3D printer bed can endure the repeated heating cycles that occur during 3D printing. Its flexible surface allows for easy removal of prints once the heated bed cools down to room temperature. If a print still sticks, just detach the upper magnetic surface, flex the flexible surface, and watch the model easily detach and land in your hands.
- Compatible 3D Prenter Models: With a size of 257*257 mm (10.12*10.12 inch), this build plate is compatible with Bambu Lab A1, X1, X1C, P1P, P1S and X1-Carbon Combo. Please confirm your printer model before purchasing. After installation, please ensure to re-level the print bed to enhance the printing quality.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 0.00 x 10.12 x 10.12 Inches
See On Amazon #15
Creality Ender 3 Build Plate Kit Dual-Sided Printing Platform Board Glossy PEO + Matte PEI Plate Build Surface for Ender 3 V3 SE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/S1 Pro 3D Printer 235x235mm
Asin: B0CQR4WX78 | Model: PEO+PEI Build Plate | PartNumber: PEO+PEI Build Plate
【Compatible 3D Printers】The Double-Sided Smooth Peo+ Matte Pei Print Bed Suitable For 3D Printers With 235×235Mm Platform Size, Such As Suitable For Creality Ender 3 V3 Se/Ender 3 V3 Ke/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/Cr 10 Se, Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Flatness & Easy Demolding】High-Flatness Spring Steel Sheet With Excellent Elasticity, Remains Undistorted After Repeated Bending, Wear-Resistant And Durable, Facilitating Demolding..
【Quick Installation & Precise Positioning】Dual-Sided Printing Platform Board Kit – Glossy Peo + Matte Pei, With The Unique Dual-Handle + Dual-Locating Hole Design For Accurate Installation..
【High Adhesion & Stable Molding】Ender 3 V3 Se Pei Build Plate Thin Spring Steel Sheet With Surface Adhesion To High-Adhesion Materials, To Reduce Inertia During Platform Movement For Smoother 3D Printer Operation..
【Compatible Filaments】Ender 3 Build Plate Peo Sticker Surface Can Withstand Temperatures Of Approximately 80℃; Recommended For Printing Pla_Petg_Tpu. Matte Pei Surface Suitable For Printing Nearly All Mainstream Filaments: Pla, Petg, Abs, Tpu, Asa, Pet, Pa, Pc, Etc. Dual-Sided Platform Combining The Strengths Of Both, Allowing For Seamless Switching..
Features
- Upgraded Double Sided Printing Platform Board Double-sided PEO+PEI spring steel plate, one side is smooth diamond type print surface-upgraded glossy PEO film. The other side is coated PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, high-adhesion black matte PEI, to prevent model warpingand prints without warping.
- Compatible Filaments Ender 3 build plate PEO sticker surface can withstand temperatures of approximately 80 ; recommended for printing PLA_PETG_TPU. Matte PEI surface suitable for printing nearly all mainstream filaments: PLA, PETG, ABS, TPU, ASA, PET, PA, PC, etc. Dual-sided platform combining the strengths of both, allowing for seamless switching.
- Compatible 3D Printers The double-sided smooth PEO+ matte PEI print bed suitable for 3D printers with 235 235mm platform size, such as suitable for Creality Ender 3 V3 SE/Ender 3 V3 KE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/CR 10 SE, Please confirm your 3D printer platform size before ordering.
- High Adhesion & Stable Molding Ender 3 v3 se PEI build plate thin spring steel sheet with surface adhesion to high-adhesion materials, to reduce inertia during platform movement for smoother 3D printer operation.
- High Flatness & Easy Demolding High-flatness spring steel sheet with excellent elasticity, remains undistorted after repeated bending, wear-resistant and durable, facilitating demolding.
- Quick installation & Precise positioning Dual-Sided Printing Platform Board Kit Glossy PEO + Matte PEI, with the Unique dual-handle + dual-locating hole design for accurate installation.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.31 x 10.43 x 9.84 inches | Weight: 1.21 Pounds
See On Amazon #16
HICTOP Bambu lab PEI Sheet Double Sided 257.5 x 257.5mm(10.14 * 10.14inch) Textured PEI Sheet PEI Build Plate for Bambu Lab X1/ X1C/ P1P /A1 3D Printers
Asin: B0C4H66WXN
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃..
5 The Size Of Hictop Pei Bed Is 257.5 X 257.5Mm(10.14*10.14Inch), It Is Applicable With Bambu Lab X1/ X1c/ P1p/A1 3D Printers.
4 Prints Come Off 257.5 X 257.5Mm(10.14*10.14Inch) Pei Sheet Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It.
2 The Hictop Textured Pei Is Very Easy To Use, Simply Place The Steel Platform With Pei Surface On The Top Of The Heated Bed..
Features
- 1 The HICTOP double-sided pei is a flexible steel platform coated with textured PEI surface on both sides.
- 2 The HICTOP textured PEI is very easy to use, simply place the steel platform with PEI surface on the top of the heated bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85 .
- 4 Prints come off 257.5 x 257.5mm(10.14*10.14inch) pei sheet easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
- 5 The size of HICTOP PEI bed is 257.5 x 257.5mm(10.14*10.14inch), it is applicable with Bambu Lab X1/ X1C/ P1P/A1 3D printers
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #17
Official Creality Ender 3 V3 SE Build Plate 235x235 Original Textured PEI Sheet Magnetic Flexible Spring Steel Build Plate for Ender 3/Ender 3 V2/Ender 3 V3 KE/Ender 3 V3 SE/K1/K1C
Asin: B0CTQSMSJZ
High Quality Spring Steel - Crafted From High-Precision Spring Steel, Our Build Plate Ensures Exceptional Flatness, Guaranteeing Uniform Layer Adhesion During Printing. Its Elasticity Eases Prints Removal By Gently Bending. The Durable Plate Withstands Heating, Cooling Cycles, And Bending For Extended Use. Excellent Thermal Conductivity Ensures Even Heat Distribution, Preventing Object Contraction Or Deformation, Significantly Enhancing 3D Printing Quality, Convenience, And Durability..
In Order To Save Your Costs And Minimize Unnecessary Waste, This Product Only Includes An Ender 3 V3 Se Pei Sheet Without Magnetic Sheet. Therefore, It Is Suitable For Users Whose Original Magnetic Sticker Is Still Functional. If The Original Magnetic Sticker Is Damaged, Please Consider Purchasing The Build Plate Kit That Includes Magnetic Sheet..
Efficient Magnetic Board Design - The Printing Board Features A Magnetic Suction Design, Greatly Simplifying Base Replacement For Enhanced Convenience. With Dual Handles For Improved Grip, It Facilitates Easy And Secure Disassembly And Installation. Cleverly Positioned Holes Ensure Swift, Accurate Alignment, Preventing Model Displacement During Printing. Overall, The Design Prioritizes Swift Installation And Convenient Disassembly, Meeting Users' Demands For Efficient 3D Printing..
The Pei Coating Is Characterized By Its Wear Resistance And High-Temperature Durability. It Is Not Easily Scratched And Is Widely Applicable To Various Printing Materials. It Provides Reliable Adhesion To The Model Under Both High And Low Temperatures, Ensuring Stable 3D Printing Without Warping And Significantly Improving The Success Rate Of Prints..
Features
- Official Original Build Plate - Offical Creality Ender 3 V3 SE build plate, with dimensions of 235x235mm and a printing area of 220x220mm. Additionally, it is compatible with other FDM printers of the same size, such as Ender 3, Ender 3S, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Pro, Ender 3 Neo, Ender 3 V2, Ender 3 V2 Neo, Ender 3 V3, Ender 3 V3 KE, Ender 3 V3 SE, Ender 5, Ender 5S, Ender 5 S1, Ender 5 Pro, K1, K1C, KR, CR 10 SE, CR20, CP 01, etc.
- The PEI coating is characterized by its wear resistance and high-temperature durability. It is not easily scratched and is widely applicable to various printing materials. It provides reliable adhesion to the model under both high and low temperatures, ensuring stable 3D printing without warping and significantly improving the success rate of prints.
- High Quality Spring Steel - Crafted from high-precision spring steel, our build plate ensures exceptional flatness, guaranteeing uniform layer adhesion during printing. Its elasticity eases prints removal by gently bending. The durable plate withstands heating, cooling cycles, and bending for extended use. Excellent thermal conductivity ensures even heat distribution, preventing object contraction or deformation, significantly enhancing 3D printing quality, convenience, and durability.
- Efficient Magnetic Board Design - The printing board features a magnetic suction design, greatly simplifying base replacement for enhanced convenience. With dual handles for improved grip, it facilitates easy and secure disassembly and installation. Cleverly positioned holes ensure swift, accurate alignment, preventing model displacement during printing. Overall, the design prioritizes swift installation and convenient disassembly, meeting users' demands for efficient 3D printing.
- In order to save your costs and minimize unnecessary waste, this product only includes an Ender 3 V3 SE PEI sheet without magnetic sheet. Therefore, it is suitable for users whose original magnetic sticker is still functional. If the original magnetic sticker is damaged, please consider purchasing the build plate kit that includes magnetic sheet.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #18
Creality Official Ender 3 Bed Upgraded, PEI Sheet Removable Magnetic Flexible Heated Bed Build Plate Surface Bed Cover for Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE 235X235mm
Asin: B09WK7BDBX
❤【Great Adhesion & Easy Take Mold】Print Molds Onto Pei Sheet Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety. With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Mold Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
👑【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
👍【Simple Installation】Our Pei Steel Sheet Is Easy To Install And The Installation Time Is Less Than 2 Minutes. Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
⭕【Wide Application】The Pei Sheet Can Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Pei Sheet 3D Printer Bed Perfect Printing Size Works Well With Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c, Please Remove The Two Positioning Screws On The Hotbed First.) Pei Sheets Can Withstand The Numerous Heat Cycles That A 3D Printer Bed Goes Through From Print To Print..
Features
- Quality Assurance 100% Official Creality 3D Printer PEI Sheet Removable Magnetic Flexible Heated Bed Platform has three overlaps, heat resistant and durable. The flexible spring steel platform is in the middle, covered with an imported PEI surface on it, which can be resistant to 200 C and has high strength with no deformation. And a magnetic base at the bottom can withstand a long time of work with the 3d printer heated bed at a high temperature of 70 C.
- Wide Application The PEI sheet can compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3/Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C, please remove the two positioning screws on the hotbed first.) PEI sheets can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Great Adhesion & Easy Take Mold Print molds onto PEI sheet surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- Simple Installation Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #19
Creality K1 PEI Build Plate, Powder Coating, Magnetic 3D Printer Build Bed, for Creality K1/Ender 3 V3 SE/Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1 and All 235 * 235mm Size 3D Printer
Asin: B0CGWLLQ39 | Model: K1 PEI Build Plate | PartNumber: K1 PEI Build Plate
High-Strength Spring Steel Plate: Not Easy To Deform, Made Of High-Strength Spring Steel Plate, With Good Flatness, Good Elasticity, And No Deformation After Repeated. Strong Magnetic Force, Not Easy To Dislocate.
After Sales Support: We Provide Professional After-Sales Service. Please Kindly Contact Us Directly Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question. Note: Compatible Fdm 3D Printers With A Build Plate Size Of 235×235Mm.
Exceptional Flatness, Easy Model Removal: Easy To Remove Printed Models, One Second To Take Off Printed Models Without Tools, Just By Bending The Plate. Thoughtful Design Finer Details, Precise Positioning For Quicker Application.
Ultra-High Adhesion, More Stable Molding: Good Adhesion Between Pei And Various Filaments, The Model Is Easy To Stick To Pei And The Bottom Surface. Suit For K1/ Ender 3 V3 Se/ Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/Cp-01/Cr-20/Cr20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo.
Features
- Premium PEI Powder Coating, Excellent Heat Resistance: frosted PEI powder coating has the characteristics of high temperature resistance, excellent flame retardancy, high strength and high rigidity, the plate surface is not easy to get scratched or damaged
- Ultra-High Adhesion, More Stable Molding: Good adhesion between PEI and various filaments, the model is easy to stick to PEI and the bottom surface. Suit for K1/ Ender 3 V3 SE/ Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo
- High-Strength Spring Steel Plate: Not easy to deform, made of high-strength spring steel plate, with good flatness, good elasticity, and no deformation after repeated. Strong magnetic force, not easy to dislocate
- Exceptional Flatness, Easy Model Removal: Easy to Remove Printed Models, One second to take off printed models without tools, just by bending the plate. Thoughtful design finer details, precise positioning for quicker application
- After Sales Support: We provide professional after-sales service. Please kindly contact us directly our customer service will respond to you within 24 hours no matter what the question. Note: Compatible FDM 3D printers with a build plate size of 235 235mm
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.10 x 9.24 x 9.25 inches | Weight: 1.00 pounds
See On Amazon #20
Official Creality Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10/CR-10S/Ender 3 Max/Ender 3 Max Neo/SV06 Plus/SV04 IDEX/Longer LK5 Pro 3D Printer 310X310MM
Asin: B07JFH3MFK | Model: CR-10-Magnetic | PartNumber: CR-10-Magnetic | Ean: 0667797511692 | UPC: 667797511692
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands.
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.93 Pounds
See On Amazon
Looking For Something Else?
Search