Frontpage > Product > Bigtreetech Panda Touch, Compatible With Bambu-Lab P1s/P1p/X1c/A1/A1 Mini 3D Printers, Touch Screen ...

BIGTREETECH Panda Touch, Compatible with Bambu-lab P1S/P1P/X1C/A1/A1 Mini 3D Printers, Touch Screen Upgrade Kit, Support AMS and Multi-Printers Management, Please Check Firmware Compatibility First

Asin: B0CSSM5PY2


As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

🐼【Ams Management】Panda Touch Introduces A Groundbreaking Upgrade To Bamboo P/X/A Series By Providing An Unparalleled, Intuitive Experience With Direct Control Of The Ams.Supporting Up To 4 Ams Units With 16 Filament Slots Per Printer On Up To 10 Printers, You Can Effortlessly Manage And Customize Filament Types, Colors, And Printing Temperatures With Btt Panda Touch. Make Multi-Colors Printing Effortless On Any Bamboo-Lab Machine!.
🐼【About Firmware Update】 Panda Touch Firmware Has Been Updated To V1.0.3. Some Units May Ship With An Earlier Firmware Version. Please Check Your Firmware Version And Upgrade To The Latest For The Best Using Experience. Please Check On Bttwiki For Update Tutorial: Bttwiki/Pandatouch.Html#Firmware..
🐼【Multiple Functions】Panda Touch Help To Control Your Bamboo Printers Freely, It Supports Ams Management, Portable Control, Led Light Control, Print Head And Heatbed Control, Fan Speed Control, Tf Card / U Disk Reading, Printing Files Management,Auto Search Bamboo Printers Within The Lan; Multi-Printers Control And Management And So On..
🐼【About Compatibility】Panda Touch Is Compatible With All Bamboo-Lab Printers Firmware Versions Up Until: P1p> V01.05.02.00, P1s> V01.05.02.00, X1c> V01.07.02.00, A1> V01.01.01.00, A1 Mini> V01.01.03.00. It Is Possible That Bamboo-Lab Release A Future Firmware Which Impacts Some Functions Of Panda Touch. We Will Monitor All Beta Firmwares, And Will Get You Informed Via Amazon Or Our Social Channel If Any Firmware Is Found Affected. Note: Warranty Does Not Cover Function Lost By A Firmware Update..
🐼【Up To 10 Printers Control】Btt Panda Touch Enables Simultaneous Control And Monitoring Of 10 Bamboo-Labs Printers Ranging From P1/X1 To A1 Series. We've Developed Multiple Group Control Techniques Which Allows You To Set One Printer As A Master And Other As Followers, Or To Set Each Printer As Its Own Master. If You Have More Than One Bamboo Machines Then Panda Touch Will Give You The Fine Grained Group Control That You've Been Looking For..
🐼【2 Charging Modes For Portability】Bigtreetech Panda Touch Features Magnetic Charging With The Equipped Magnetic Charging Dock And Usb Cable Without Extra Power Supply! And Its Built-In Lithium Battery Also Allows 30 Mins Of Wireless Portable Life, So That You Can Take It Away Anywhere In The House Or Print Farm To Control Your Printers..

Features

  • Plug and Play BTT Panda Touch V1.0 is a 5-inches plug-and-play touch screen upgrade kit that s similar to the look and feel of the original X1C touchscreen. Just 2 main steps(dock installation + wiring) to easily get it installed, and then you can release the full capabilities of Bamboo Lab P-series printers to reach X-series experience!
  • 2 Charging Modes for Portability BIGTREETECH Panda Touch features magnetic charging with the equipped magnetic charging dock and USB cable without extra power supply! And its built-in lithium battery also allows 30 mins of wireless portable life, so that you can take it away anywhere in the house or print farm to control your printers.
  • AMS Management Panda Touch introduces a groundbreaking upgrade to Bamboo P/X/A series by providing an unparalleled, intuitive experience with direct control of the AMS.Supporting up to 4 AMS units with 16 filament slots per printer on up to 10 printers, you can effortlessly manage and customize filament types, colors, and printing temperatures with BTT Panda Touch. Make multi-colors printing effortless on any Bamboo-Lab machine!
  • Up to 10 printers Control BTT Panda Touch enables simultaneous control and monitoring of 10 Bamboo-Labs printers ranging from P1/X1 to A1 series. We've developed multiple group control techniques which allows you to set one printer as a master and other as followers, or to set each printer as its own master. If you have more than one Bamboo machines then Panda Touch will give you the fine grained group control that you've been looking for.
  • Multiple Functions Panda Touch help to control your Bamboo printers freely, it supports AMS management, portable control, LED light control, print head and heatbed control, fan speed control, TF Card / U disk reading, printing files management,Auto search Bamboo printers within the LAN; Multi-printers control and management and so on.
  • About Compatibility Panda Touch is compatible with all Bamboo-Lab printers firmware versions up until: P1P> v01.05.02.00, P1S> v01.05.02.00, X1C> v01.07.02.00, A1> v01.01.01.00, A1 Mini> v01.01.03.00. It is possible that Bamboo-Lab release a future firmware which impacts some functions of Panda Touch. We will monitor all beta firmwares, and will get you informed via Amazon or our social channel if any firmware is found affected. NOTE: Warranty DOES NOT cover function lost by a firmware update.
  • About Firmware Update Panda Touch firmware has been updated to V1.0.3. Some units may ship with an earlier firmware version. Please check your firmware version and upgrade to the latest for the best using experience. Please check on bttwiki for update tutorial: bttwiki/PandaTouch.html#firmware.
  • See more on Amazon...

Brand: BIQU   |   Manufacturer: BIQU

Amazon Price: $69.99 | as of 06/15/2024 (1:02pm pst) *DETAILS
Availability: In Stock

See On Amazon




Similar To BIGTREETECH Panda Touch Compatible with

  #1

BIGTREETECH BLTouch V3.1 Auto Bed Leveling Sensor Kit+Mount Bracket+1M Extension Cable for Ender 3,Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/CR10 3D Printer with SKR Mini E3 V3.0,Octopus/Manta Board

Asin: B087CQ3RLG   |   Model: 1   |   PartNumber: 1   |   Ean: 0779288068124   |   UPC: 779288068124

🎅【Simple To Use】Thanks To Its Small And Simple Structure, Bl Touch Auto Leveling Kit Can Be Easily Applied. As Bltouch Works As Usual Auto Bed Leveling Sensor, Gathering Information & Setting Up Your Firmware Will Be An Easy Task. Can Be Used On Heating Beds Made Of Glass, Wood, Metal And Other Materials..
🎅【Wide Compatiblity】Bl Touch Auto Bed Leveling Sensor With The Bracket Is Suitable For Ender 3/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/Ender 5S/Cr10 3D Printer, Compatible With Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Max Ez/Skr V1.4 Turbo/Skr 3/Ez/Manta M8p/M4p/M5p,Manta E3 Ez/Kraken/Skr Pico, V4.2.7, Mks Gen L...3D Printer Control Board..
🎅【What You Get】This Kit Consists Of Bltouch V3.1 Auto Leveling Sensor, Mount And 1 Meter Extension Cable, Which May Not Fit Ender 3 Pro Machine. If You Wanna Buy Extra Extension Cable, Please Check The Asin: B08g8b23l7(Copy And Paste On Search Bar)..
🎅【Logic Voltage Free】3.3V/5V The Desired Output Logic Voltage Is Stored In The Eeprom Of The Probe And Can Be Selected By Commands. The Z Trigger Pulse With Adaptable Width Beyond 10Ms Eliminates The Danger Of Firmware Missing The Trigger And The Nozzle Reaching The Bed..
🎅【Smart To Use】Bl Touch Auto Bed Leveling Kit Featured With Self-Test, The Push Pin Is Operated Three Times To Test When The Power Is On. Bltouch V3.1 Also Added Other Smart Functions, Like Alarm, Alarm Release, Test Mode For M119, Which Enables User Convenience And Enjoyable Printing..

Features

  • High precision ANTCLABS BLTouch V3.1 auto bed leveling sensor s standard deviation in repeatability is around 0.005mm precise. The stroke is up to 1.6mm longer than V2.0.
  • Smart to Use BL touch auto bed leveling kit featured with self-test, The push pin is operated three times to test when the power is on. Bltouch V3.1 also added other smart functions, like alarm, alarm release, test mode for M119, which enables user convenience and enjoyable printing.
  • Simple to Use Thanks to its small and simple structure, bl touch auto leveling kit can be easily applied. As BLTouch works as usual auto bed leveling sensor, gathering information & setting up your firmware will be an easy task. can be used on heating beds made of glass, wood, metal and other materials.
  • Logic Voltage Free 3.3V/5V the desired output logic voltage is stored in the EEPROM of the probe and can be selected by commands. The Z trigger pulse with adaptable width beyond 10ms eliminates the danger of firmware missing the trigger and the nozzle reaching the bed.
  • Wide Compatiblity BL touch auto bed leveling sensor with the bracket is suitable for Ender 3/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/Ender 5S/CR10 3D Printer, compatible with SKR MINI E3 V3.0/Octopus V1.1/Octopus Pro/Max EZ/SKR V1.4 Turbo/SKR 3/EZ/Manta M8p/M4p/M5P,Manta E3 EZ/Kraken/SKR Pico, V4.2.7, MKS Gen L...3d printer control board.
  • What You Get This kit consists of BLTouch V3.1 auto leveling sensor, mount and 1 meter extension cable, which may not fit ender 3 pro machine. if you wanna buy extra extension cable, please check the Asin: B08G8B23L7(copy and paste on search bar).
  • See more on Amazon...

Brand: BIGTREETECH   |   Manufacturer: ANTCLABS

Amazon Price: $42.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon




  #2

BIGTREETECH SFS V2.0 Smart Filament Runout Sensor Upgrade Bi-Directional Photoelectric Filament Break Sensor for 1.75mm Filament for SKR Mini E3 V3.0 Manta M8P Octopus Pro BTT Pi Control Board

Asin: B0C77QS4TS   |   Model: BIGTREETECH SFS V2.0   |   PartNumber: BIGTREETECH SFS V2.0

【Wide Compatibility, Easy Installation】Supports Bowden And Direct-Drive Extruders, With 3 Mounting Holes For Easy Mounting To Printer Using Bracket. Support Motherboards With Available Endstop Ports Or Dedicated Filament Runout Ports, Such As Bigtreetech Skr Mini E3 V3.0, Manta E3ez, Manta M8p, Octopus Pro, Etc. Please Consult Our Technical Support Before Using The Motherboard Without Filament Runout Port..
【Instructions For Use】Insert Filament From The Direct Quick Connector In Any Direction Of Smart Filament Sensor; The Red Light Will Illuminate When There Is No Filament In The Module. The Blue Light Will Flash When The Extrusion Is Normal. The Blue Light Will Stay On Or Off When There Is No Extrusion..
【Photoelectric Sensor Technology】Sfs V2.0 Adopts Photoelectric Sensor Technology, With Theoretical Detection Length Of 2.88Mm, Which Is More Accurate Than The 7Mm Of Sfs V1.0. Please Note: 2.88 Mm Is The Minimum Detection Length Required For The Sensor To Function Properly. If You Encounter Problem Of False Triggers, Try Increasing The Detection Length By 1Mm Increments Until The Problem Is Resolved..
【Multifunctional Detection】Sfs V2.0 Detects Extrusion Errors Caused By Filament Runout, Nozzle Clogging, Filament Tying, And Extruder Trouble. It Has Two Signal Outputs And Indicator Lights To Distinguish Between Clogging Or Filament Runout. Small And Lightweight, It Will Not Add Too Much Pressure To The Printer's Extrusion Head..

Features

  • Bi-directional Feeding BIGTREETECH SFS V2.0 is bi-directional, there is no restriction on filament direction, giving you guys more flexibility during installation. It suitable for Marlin, Klipper, and RRF firmware.
  • Multifunctional Detection SFS V2.0 detects extrusion errors caused by filament runout, nozzle clogging, filament tying, and extruder trouble. It has two signal outputs and indicator lights to distinguish between clogging or filament runout. Small and lightweight, it will not add too much pressure to the printer's extrusion head.
  • Wide Compatibility, Easy Installation Supports Bowden and Direct-Drive extruders, with 3 mounting holes for easy mounting to printer using bracket. Support motherboards with available endstop ports or dedicated filament runout ports, such as BIGTREETECH SKR Mini E3 V3.0, Manta E3EZ, Manta M8P, Octopus Pro, etc. Please consult our technical support before using the motherboard without filament runout port.
  • Photoelectric Sensor Technology SFS V2.0 adopts photoelectric sensor technology, with theoretical detection length of 2.88mm, which is more accurate than the 7mm of SFS V1.0. Please Note: 2.88 mm is the minimum detection length required for the sensor to function properly. If you encounter problem of false triggers, try increasing the detection length by 1mm increments until the problem is resolved.
  • Instructions for use Insert filament from the direct quick connector in any direction of smart filament sensor; The red light will illuminate when there is no filament in the module. The blue light will flash when the extrusion is normal. The blue light will stay on or off when there is no extrusion.
  • See more on Amazon...

Brand: BIGTREETECH   |   Manufacturer: BIGTREETECH

Warranty: 1年保修

Amazon Price: $22.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon




  #3

BIGTREETECH Panda Jet Print Head Cooling Fan Duct Compatible with Bambu-Lab P1S/P1P/X1C/X1E 3D Printer Original Hot End & Panda Flow/Revo [Magnetic Installation]

Asin: B0D4VNJ3TC   |   Model: KINGPRINT-1060000680   |   PartNumber: KINGPRINT-1060000680

【Seamless Installation】Compatible With Bambu-Lab P1/X1 Series Hotends. Also Works With Panda Flow And Revo Series Hotends. Setup Is Effortless..
【Package Including】The Panda Jet Cooling Fan Duct Packaging Includes The Panda Jet, Hex Key, Bq Sticker, Packaging Box. We Provide Complete Installation Instructions For Easy Installation..
【Superior-Quality Mjf Nylon, Strong, Durable】Printed With Mjf Nylon Of The Highest Quality, The Panda Jet Features High-Temperature Resistance, High Strength And Durability, And Corrosion Resistance - Ensuring A More Effective And Long-Lasting Performance..

Features

  • Cutting Edge Design. Precision Cooling The innovative air path design and corner outlet placement carefully channel cool air through the nozzle, greatly enhancing the bridging and overhangs of your print while also keeping the print view clear.
  • Superior-Quality MJF Nylon, Strong, Durable Printed with MJF nylon of the highest quality, the Panda Jet features high-temperature resistance, high strength and durability, and corrosion resistance - ensuring a more effective and long-lasting performance.
  • Seamless Installation Compatible with Bambu-Lab P1/X1 series hotends. Also works with Panda Flow and Revo series Hotends. Setup is effortless.
  • Package Including The Panda Jet cooling fan duct packaging includes the Panda Jet, Hex Key, BQ sticker, packaging box. We provide complete installation instructions for easy installation.
  • See more on Amazon...

Brand: BIGTREETECH   |   Manufacturer: BIGTREETECH

Dimensions: 2.05 x 2.28 x 1.20 inches

Amazon Price: $35.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon




  #4

BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry-Pi Online Printing for Voron V2.4 Upgrade 3D Printer (with 8Pcs TMC2209)

Asin: B09713SRVP   |   Model: KINGPRINTER-UUU001949   |   PartNumber: KINGPRINTER-UUU001949

🐙【Motherboard Expansion Function】Support Bltouch, Locked-Rotor Detection, Shutdown After Printing, Resume Printing After Power Failure, Can Bus, U Disk Function, Iic Expansion; At The Same Time Reserved Wifi Interface, Pt100 Thermistor Interface (Optional), Dual Z-Axis Printer..
🐙【Tmc2209 Driver Mode】Tmc Motor Drivers Can Be Used In Spi Or Uart Mode By Simply Adjusting The Onboard Jumpers Beneath Each Motor Driver. Additionally You Can Connect Or Disconnect The Tmc Diag Pin Using An Onboard Jumper Allowing You To Use Hard Endstops Or Sensorless Homing Without The Need To Cut Any Pins..
🐙【Tmc2209 Driver Features】The Tmc2209 Stepper Driver Is Not Easy To Lose Steps And Is In An Ultra-Quiet Mode; The Module Has A Large Area Of Heat Dissipation Pad, Which Can Reduce The Temperature Of The Driver When It Is Working; The Module Supports Three Modes: Step / Dir And Uart..
🐙【Strong Diy Support】This Motherboard Supports Up To 8 Stepper Drivers With 9 Stepper Driver Outputs In Total; And Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage Rail That Will Drive Each Fan. Select From Vin, 12V Or 5V..

Features

  • Main Control Chip Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
  • Strong DIY Support This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
  • Motherboard Expansion Function Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional), dual Z-axis printer.
  • TMC2209 Driver Features The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
  • TMC2209 Driver Mode TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.
  • See more on Amazon...

Brand: BIGTREETECH   |   Manufacturer: BIGTREETECH

Amazon Price: $83.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon




  #5

BIGTREETECH Magnetic USB Charging Dock for Panda Touch Screen, 3D Printer Accessories

Asin: B0CY2P9F9R

🐼 The Usb Charging Dock Is Used With Bigtreetech Panda Touch To Control Your Bamboo Lab 3D Printers..
🐼 Please Feel Free To Contact Us If You Have Any Problem About Our Product, We Are Always Ready For Help..
🐼 It Is Easy To Install : Screw The Magnetic Charging Dock And The Bracket, Peel Off The Backing Paper Of The Bracket And Then Stick The Combo Down A Neat Printer Surface Just Above The Original Screen And Compact It..
🐼 The Power Input Has Been Outfitted With Hot-Plug Protection, Allowing Users To Hot Plug The Power Supply..

Features

  • Package includes magnetic charging dock*1, mounting bracket*1, USB-C charging cable*1, hex key*1, M3 x 6 flat head countersunk screws*4
  • The power input has been outfitted with hot-plug protection, allowing users to hot plug the power supply.
  • The USB charging dock is used with BIGTREETECH Panda Touch to control your Bamboo Lab 3D Printers.
  • It is easy to install : screw the magnetic charging dock and the bracket, peel off the backing paper of the bracket and then stick the combo down a neat printer surface just above the original screen and compact it.
  • Please feel free to contact us if you have any problem about our product, we are always ready for help.
  • See more on Amazon...

Brand: BIQU   |   Manufacturer: BIQU

Amazon Price: $24.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon




  #6

BIGTREETECH SKR V1.4 Motherboard, 32 Bit DIY 3D Printer Control Board, Support Marlin/Klipper, Compatible with TMC2208/TMC5160/EZ2209 and TFT35 E3/ TFT70/ Mini12864 Touch Screen

Asin: B0D1Y1JMYR

💡【Diy-Friendly】 Bigtreetech Skr V1.4 Is An Ideal Cost-Effective Control Board For Those 3D Diy Enthusiast. It Reserves I2c, Spi And Wifi Interface. When Use The Wifi Module, You Can Use Btt Writer For Firmware Flashing, Serial Port Debugging And So On..
💡【Other Interfaces】Dual Z-Axis Interfaces To Eliminate The Trouble Of External Drive Expansion Module; The Thermistor Interface Is Protected By A Capacitor And A Varistor To Enhance The Resistance Of The Interface. There Are 4 Fan Interfaces On The Board In Total: 1-Way Cnc Fan And.
💡【Reserved Dc Module Interface】Reserved Dcdc Mode V1.0 Power Module Interface To Supply Power To Tft Panel, Bl Touch And Neopixel(Also Reserved Rgb Light Bar Supporting Neopixel Scheme)..
💡【Wide Compatibility】Skr V1.4 Is The Is The Upgraded Version Of Skr V1.3, It Is Compatible With Most Fdm 3D Printers In The Market Such As Ender-3/Ender-3 V2/Ender-3 S1, Cr 10 Etc. It Supports Tft2.4/Tft2.8/Tft3.5 Touch Screen And Also Lcd2004/Lcd12864 Screen; And Compatible With Tmc2208/Tmc2209/Ez2209/Tmc2208/Tmc5160 Stepper Drivers..

Features

  • 32 Bit 3D Printer Motherboard BTT SKR V1.4 control board adopts 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip. It comes with Marlin firmware 2.0, and also supports to run Klipper with BTT Pi v1.2 or CB1+Pi4B.
  • Wide Compatibility SKR V1.4 is the is the upgraded version of SKR V1.3, it is compatible with most FDM 3D Printers in the market such as Ender-3/Ender-3 V2/Ender-3 S1, CR 10 etc. It supports TFT2.4/TFT2.8/TFT3.5 touch screen and also LCD2004/LCD12864 screen; And compatible with TMC2208/TMC2209/EZ2209/TMC2208/TMC5160 stepper drivers.
  • DIY-friendly BIGTREETECH SKR V1.4 is an ideal cost-effective control board for those 3D DIY enthusiast. It reserves I2C, SPI and WiFi interface. When use the WiFi module, you can use BTT Writer for firmware flashing, serial port debugging and so on.
  • Reserved DC Module Interface Reserved DCDC Mode V1.0 power module interface to supply power to TFT panel, BL touch and Neopixel(also reserved RGB light bar supporting Neopixel scheme).
  • Other Interfaces Dual Z-axis interfaces to eliminate the trouble of external drive expansion module; The thermistor interface is protected by a capacitor and a varistor to enhance the resistance of the interface. There are 4 fan interfaces on the board in total: 1-way CNC fan and
  • See more on Amazon...

Brand: BIQU   |   Manufacturer: BIQU

Amazon Price: $29.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon




  #7

BIGTREETECH Direct BLTouch V3.1 Auto Bed Leveling Sensor+1.5m Extension Cable for Ender 3 Ender 5 Series 3D Printer with SKS Mini E3,Octopus

Asin: B08TWSGJBB   |   Model: DKG000113+XPX000284   |   PartNumber: DKG000113+XPX000284   |   Ean: 0779605800079   |   UPC: 779605800079

⚡【Z Trigger With Adaptable Width】: Z Trigger With Adaptable Width: Bltouch Auto Bed Leveling Sensor The Z Trigger Pulse With Adaptable Width Beyond 10Ms Eliminates The Danger Of Firmware Missing The Trigger And The Nozzle Reaching The Bed.He Stroke Is Up To 1.6Mm Longer Than V2.0..
⚡【Packing List】 : Included In The Package Are Bltouch V3.1 Auto Bed Leveling Sensor And 1.5M Extension Cable. (Notice: Please Check If The Wire Sequence Of The Extension Cable Is Consistent With That Of The Motherboard Before Using The Extension Cable. If Not, You Need To Modify The Wiring Sequence Of The Extension Cable According To Your Motherboard.).
⚡【Engineering Plastic Push-Pin】: Bl Touch V3.1 Adopts Engineering Plastic Push-Pin Can Be Bent More Easily Than Aluminum Pins So That Engineering Plastic Push-Pin Can Be Recovered Well And The 3D Printer Can Be Protected..
⚡【 Smart Bltouch V3.1 Highlights】: Bltouch V3.1 Support Logic Voltage Free(Open Drain Output),3.3V / 5V The Desired Output Logic Voltage Is Stored In The Eeprom Of The Probe And Can Be Selected By Commands..

Features

  • Warm Notice : An additional power supply may be needed in case your board does not supply enough current at 5V.Electronic devices can be damaged or even destroyed if connected to the wrong side polarity.Set Zmin pull-up on your firmware when using Logic Free (In most cases, it is already set up)
  • Smart bltouch V3.1 Highlights : Bltouch v3.1 support logic Voltage Free(Open Drain Output),3.3V / 5V The desired output logic voltage is stored in the EEPROM of the probe and can be selected by commands.
  • Z trigger with adaptable width : Z trigger with adaptable width: bltouch auto bed leveling sensor the Z trigger pulse with adaptable width beyond 10ms eliminates the danger of firmware missing the trigger and the nozzle reaching the bed.he stroke is up to 1.6mm longer than V2.0.
  • Engineering plastic Push-pin : BL touch V3.1 adopts engineering plastic push-pin can be bent more easily than aluminum pins so that engineering plastic push-pin can be recovered well and the 3D printer can be protected.
  • Packing List : Included in the package are BLTouch V3.1 auto bed leveling sensor and 1.5m Extension Cable. (Notice: Please check if the wire sequence of the extension cable is consistent with that of the motherboard before using the extension cable. If not, you need to modify the wiring sequence of the extension cable according to your motherboard.)
  • See more on Amazon...

Brand: BIGTREETECH   |   Manufacturer: ANTCLABS

Amazon Price: $43.99 | as of 06/15/2024 (1:02pm pst) *DETAILS
Used Price: $27.41

See On Amazon




  #8

BIGTREETECH Octopus pro v1.1 h723 Control Board+BTT PI V1.2 Core Board+2Pcs TMC5160T V1.0+5Pcs TMC2209 V1.3 Stepper Driver kit to Running Klipper High Speed Printing for Voron CoreXY / i3 3D Printer

Asin: B0CL6J66M4   |   Model: USA6-1034215   |   PartNumber: USA6-1034215

✅【Main Core Board】: Bigtreetech Btt Pi V1.2 Motherboard Adopts Allwinner H616, 64-Bit Quad-Core, Cortex-A53@1.5Ghz Processor, Ram Is 1Gb Ddr3l Sdram. The Same As The Raspberry-Pi 3B/4B,Built-In 2.4G Wifi Module, Supports 100Mbps Wireless Network..
【 ❤️After-Sales Service】If You Have Any Problems During Use, Please Contact Us At The First Time. We Will Give You A Satisfactory Solution..
✅2Pcs Tmc5160t: Bigtreetech Tmc5160t Adopts Tmc5160t-Ta Chip, With Selectable Power Supply Voltage From 8V To 36V, Maximum Current 3A And Subdivision Is 256. Supports Spi Mode, & Sd Mode..
✅5Pcs Tmc2209 : Comes In 5 Pcs Btt Tmc2209 Uart Stepper Motor Drivers And Heatsink. Thanks To The Stealthchop2, Tmc2209 Serves As Ultra-Quiet Stepper Motor Driver With With A Continuous Current Of Up To 2.0A (With Peaks Of 2.8A). Voltage Ranges From 5.5V To The Maximun Output Of 28V..
✅【Display】: Btt Pi V1.2 Display Adopts Malig32 Mp2 Gpu,Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output And Spi Screen, Onboard 4Xusb2.0 Port.Onboard Standard 40-Pingpio Header, 3.5Mm Audio Jack, Tf Card Slot, Adxl345 Spi..
✅Bigtreetech Octopus Pro V1.1 With 6 Controllable Fans, And Two Without Control, With The Possibility Of Selecting Power Supply Voltage Between Vin, 12V, And 5V. Onboard Max31864, Support 2/4-Wire Pt100/Pt1000 Temperature Measurement Without Welding..

Features

  • High Speed Printing Kit : BIGTREETECH Octopus pro h723 board adopts the ARM Cortex-M7 series-STM32H723ZET6, main frequency up to 550MHz, 512KB flash, Support Marlin/Klipper/Operation systems Raspberry Pi / Octoprint, the best choice for Klipper high-speed printing.
  • BIGTREETECH Octopus Pro V1.1 with 6 controllable fans, and two without control, with the possibility of selecting power supply voltage between Vin, 12V, and 5V. onboard Max31864, Support 2/4-wire PT100/PT1000 temperature measurement without welding.
  • Main Core Board : BIGTREETECH BTT PI V1.2 motherboard adopts ALLWINNER H616, 64-bit Quad-core, Cortex-A53@1.5GHz Processor, RAM is 1GB DDR3L SDRAM. the same as the Raspberry-Pi 3B/4B,built-in 2.4G Wifi module, supports 100Mbps wireless network.
  • Display : BTT PI V1.2 Display Adopts MaliG32 MP2 GPU,Support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output and SPI screen, onboard 4xUSB2.0 port.onboard Standard 40-pinGPIO header, 3.5mm Audio Jack, TF card slot, ADXL345 SPI.
  • 2Pcs TMC5160T: BIGTREETECH TMC5160T adopts TMC5160T-TA chip, With selectable power supply voltage from 8V to 36V, Maximum current 3A and subdivision is 256. Supports SPI mode, & SD mode.
  • 5Pcs TMC2209 : Comes in 5 Pcs BTT TMC2209 uart stepper motor drivers and heatsink. Thanks to the StealthChop2, TMC2209 serves as ultra-quiet stepper motor driver with with a continuous current of up to 2.0A (with peaks of 2.8A). Voltage ranges from 5.5V to the maximun output of 28V.
  • After-sales Service If you have any problems during use, please contact us at the first time. We will give you a satisfactory solution.
  • See more on Amazon...

Brand: BIGTREETECH   |   Manufacturer: BIGTREETECH

Dimensions: 0.04 x 5.91 x 3.91 inches

Amazon Price: $129.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon




  #9

BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.3 Stepper Motor Driver DIY for Voron V2.4 3D Printer Controller Board Support Klipper Raspberry Pi

Asin: B09RWRBH47   |   Model: 1060000524   |   PartNumber: 1060000524

⭐Multi-Function Display: Tft35 E3 V3.0.1 Touch Screen Has Higher Compatibility. You Can Choose Two Working Modes: Uart Serial Screen Mode And 12864 Screen Mode. The Wifi Port Is Reserved, And The Wifi Function Is Implemented By An External Wifi Module.Sd Card Update Firmware Is Simple And Convenient, Download From Our Github, Copy And Save To Sd Card.
⭐Worry-Free After-Sales Service: Do You Have Any Questions? Or If You Have Any Problems That Need To Be Solved, Please Feel Free To Contact Us, And We Will Arrange The Most Professional Technical Team To Solve It For You Until You Are Satisfied..
⭐Ultra-Quiet Driver: Tmc2209 V1.3 With Spreadcycle Technology, Enables High Precision Cycle-By-Cycle Current Control For The Highest Dynamic Motion. Large Area Thermal Pad To Reduce The Temperature Of The Drive During Operation. The Motor Is Difficult To Lose Step. Can Prevent Motor Vibration. The Module Supports Step/Dir And Uart Modes..
⭐Super Multi-Function Control Panel: Support Material Interruption Detection, Continuous Printing After Power Failure, Shutdown After Printing, Bl_Touch, Support Online Printing, Etc. Upgrading The Configuration Firmware Through The Sd Card, The Operation Is Simple, Convenient And Efficient. Using High-Performance Mosfet, The Heat Dissipation Effect Is Better..

Features

  • SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware
  • SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better.
  • MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card
  • ULTRA-QUIET DRIVER: TMC2209 v1.3 with SpreadCycle technology, enables high precision cycle-by-cycle current control for the highest dynamic motion. Large area thermal pad to reduce the temperature of the drive during operation. The motor is difficult to lose step. Can prevent motor vibration. The module supports STEP/DIR and UART modes.
  • WORRY-FREE AFTER-SALES SERVICE: Do you have any questions? Or if you have any problems that need to be solved, please feel free to contact us, and we will arrange the most professional technical team to solve it for you until you are satisfied.
  • See more on Amazon...

Brand: BIQU   |   Manufacturer: BIGTREETECH

Amazon Price: $113.99 | as of 06/15/2024 (1:02pm pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.