DC Current Sensor Transmitter Output 4-20mA 0-5V Analog 0-200A Input 8mm Hole DC12V Power Supply Current Transformer (Color : DC0-10A, Size : 4-20mA Output)
Asin: B0CTH778C2 | Model: Lezard | PartNumber: Lezard | Ean: 6418475568682
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Safe And Reliable Mechanical Properties，Good Voltage Isolation,Small, Lightweight, Highly Reliable And Easy To Install..
4.Wide Application: Used For Current Monitoring Equipment Such As Substation, Variable Frequency Speed Control Device, Inverter, Street Light Monitoring, Power, Coal Mine, Etc..
2.Suitable For Current Measurement, Monitoring And Protection..
Features
- 1.Current transmitter is a kind of sensor specially used for transmitting current signals, which can convert current signals into DC signals, analogue signals, digital signals and other standard signals for output.
- 2.Suitable for current measurement, monitoring and protection.
- 3.Safe and reliable mechanical properties good voltage isolation,Small, lightweight, highly reliable and easy to install.
- 4.WIDE APPLICATION: Used for current monitoring equipment such as substation, variable frequency speed control device, inverter, street light monitoring, power, coal mine, etc.
- See more on Amazon...
Brand: Lezard | Manufacturer: Lezard
Weight: 0.33 pounds
See On Amazon Similar To DC Current Sensor Transmitter Output
#1
DZS Elec DC-DC Step-Down Constant Current Regulator Module 4-38v Input to 1.25-36v Output Adjustable Large Power 5A 75W Converter for Charging or LED Driver Module
Asin: B06XT6KMPX | Model: DC5A75W | PartNumber: DC5A75W | Ean: 0786467902094 | UPC: 786467902094
With Current Limit, Short Circuit, Over Temperature Protection, The Module Can Not Be Burned Out Even If The Output Is Short Circuit, Which Is More Safe. Please Don't Reverse Connection At The Input Port, Otherwise The Module Will Be Burned Out..
Owning Two High Precision Voltage And Current Pontentiometers, Rotate The Screw To Adjust Output Voltage And Current..
Used As A Charging Module For Lithium Battery, Blue Light Up Means Charging, Blue Light Off And Green Light Up Means Charging Completed..
Two Kinds Of Work Mode: Constant Voltage And Constant Current. The Red Indicator Light Can Show The Current Working Status. Light Up Means Constant Voltage Mode, Light Off Means Constant Current Mode..
Features
- 5A 75W large power, in addition to the function of current limit, voltage stabilizing and step-down, the module can also be used as a high power LED constant current driver module and charging module for the lithium battery of usb connector.
- Two kinds of work mode: constant voltage and constant current. The red indicator light can show the current working status. Light up means constant voltage mode, light off means constant current mode.
- With current limit, short circuit, over temperature protection, the module can not be burned out even if the output is short circuit, which is more safe. Please don't reverse connection at the input port, otherwise the module will be burned out.
- Used as a charging module for lithium battery, blue light up means charging, blue light off and green light up means charging completed.
- Owning two high precision voltage and current pontentiometers, rotate the screw to adjust output voltage and current.
- See more on Amazon...
Brand: DZS Elec | Manufacturer: DZS Elec
See On Amazon #2
Comimark 1Pcs DC 5V WCS1800 Hall Current Detection Sensor Module 35A with Overcurrent Lamp
Asin: B07XY7NT6K | Model: LY515 | PartNumber: LY515 | Ean: 0657835717704 | UPC: 657835717704
Interface Definition: Vcc: Power Positive/Dout: Ttl High/Low Level Signal Output/Gnd: Power Negative/Aout: Sampling Current Signal Conversion Voltage Output Port.
We Highly Appreciate All Customers Opinions To Improve The Selling, Also If Anything You Unsatisfied, Please Contact Us For Probable Best Solution..
Package Includes : 1Pcs Module (If The Number Of Products Received Is Incorrect, Please Contact Us . We Will Refund Or Give You A Replacement).
Users Can Preset The Limit Current Value. When The Actual Current Is Higher Than Preset Current, The On-Off Signal Will Become High Level From Low Level, And There Is Led Indicator Lamp. It Is Simple And Easy To Use..
Features
- WCS1800 hall current sensor mainly has two functions: one is followed analog signal via power amplifier, and it can be applied to A/D conversion; the other is on-off signal.
- Users can preset the limit current value. When the actual current is higher than preset current, the on-off signal will become high level from low level, and there is LED indicator lamp. It is simple and easy to use.
- Interface definition: VCC: power positive/DOUT: TTL high/low level signal output/GND: power negative/AOUT: sampling current signal conversion voltage output port
- Package Includes : 1PCS Module (If the number of products received is incorrect, please contact us . we will refund or give you a replacement)
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #3
Comimark 1Pcs Max471 Voltage Current Sensor Votage Sensor Current Sensor for Arduino
Asin: B07X7DWS4Y | Model: LY473 | PartNumber: LY473 | Ean: 0657835702908 | UPC: 657835702908
Test Current Range: Dc 0 – 3A.
We Highly Appreciate All Customers Opinions To Improve The Selling, Also If Anything You Unsatisfied, Please Contact Us For Probable Best Solution..
Package Included: 1 X Max471 Voltage Current Sensor Votage Sensor Current Sensor For Arduino.
Test Voltage Range: Dc3 – 25V (Arduino Work On 5V) Or Dc3 – 16.5V (Arduino Work On 3.3V).
Features
- This module can be used to test the current and voltage.
- Test Voltage range: DC3 25V (Arduino work on 5V) or DC3 16.5V (Arduino work on 3.3V)
- Test Current range: DC 0 3A
- Package Included: 1 x Max471 Voltage Current Sensor Votage Sensor Current Sensor for Arduino
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #4
SUPERNIGHT RGB LED Light Strip Remote Controller, 44 Keys IR Remote Controller Replacement for SMD 5050 3528 2835 RGB LED Strip Lights
Asin: B00AF5YOK2 | Model: SC-036 | PartNumber: SC-036 | Ean: 6955080503474
❤ Safe To Use---Input Dc 12V, Max Output Current Is 12A. The Remote Controller Has Been Approved Ce, Rohs, Fcc Certification, Low Voltage, Low Heat, No Radiation, It Is Safe And Touchable..
❤Easy To Use --- If You Want A Straight-Forward, Simple To Use, Cost-Effective Remote, Our This 44 Keys Ir Remote Controller Dimmer Is The Way To Go..
❤Ir Remote --- Ir Remotes Have A Performance Range Of About 30 Feet. Please Note: Ir Remotes Must Be Pointed Directly At The Devices You Are Trying To Control..
❤ Compatible With Rgb Strip-- Work With Smd 5050 3528 2835 Rgb Led Light Strips With 4-Pin Connectors. Not For Rgbw Strips Which Has 5-Pin Connectors..
Features
- Multi-Functions-- There are 20 colors and 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change. Easy for you to turn ON/OFF strip lights, DIY colors as you like and adjust brightness.
- Compatible with RGB Strip-- Work with SMD 5050 3528 2835 RGB led light strips with 4-Pin connectors. Not for RGBW strips which has 5-pin connectors.
- Safe to Use---Input DC 12V, Max output current is 12A. The remote controller has been approved CE, RoHs, Fcc certification, Low voltage, Low heat, no radiation, it is safe and touchable.
- IR Remote --- IR remotes have a performance range of about 30 feet. Please note: IR remotes must be pointed directly at the devices you are trying to control.
- Easy to Use --- If you want a straight-forward, simple to use, cost-effective remote, our this 44 keys IR remote controller dimmer is the way to go.
- See more on Amazon...
Brand: SUPERNIGHT | Manufacturer: SUPERNIGHT
Dimensions: 4.00 x 13.00 x 6.00 Inches
Warranty: 1 year.
See On Amazon #5
DAYBETTER Led Lights 2 Ports 44 Key Remote Control, Dimmer for Led Strip Lights, 4 Pin Output Remote Controller for Led Strips 12 24V DC Led Tape Light
Asin: B08C796XQ7 | Model: DRF-0362-W | PartNumber: DRF-0362-W
Easy To Use; The Controller Is Dedicated To 4 Pin Led Strips; The Voltage Is Dc 12 24 Volt.
The Maximum Current Can Pass 6A.
Infrared Remotes Have A Performance Range Of About 30 Feet; Please Note : Infrared Remotes Must Be Pointed Directly At The Devices You Are Trying To Control.
2 In 1 Connector; The Controller Box Has Two 4 Pin Ports Which Can Control 2 Light Strips At The Same Time; Or Control Only One Light Strip According To Your Needs.
Features
- 44 keys remote controller; you can choose 20 static colors; each color can be dim brighten; turn on and off; control modes; suitable for 5050;3528;2835 led light strip
- 2 in 1 connector; the controller box has two 4 pin ports which can control 2 light strips at the same time; or control only one light strip according to your needs
- Easy to use; the controller is dedicated to 4 pin led strips; the voltage is DC 12 24 volt
- Infrared remotes have a performance range of about 30 feet; please note : infrared remotes must be pointed directly at the devices you are trying to control
- The maximum current can pass 6A
- See more on Amazon...
Brand: DAYBETTER | Manufacturer: DAYBETTER
Weight: 0.15 pounds
See On Amazon #6
RF Mini Wireless Remote Controller for Single Color 3528 5050 LED Strip Lights, Wireless Remote Control with DC Connector, RF Dimmer for 12V DC LED Ribbon, Shelf Lights
Asin: B08D6FC2T6 | Ean: 0610406130319 | UPC: 610406130319
Very Easy To Operate, Comes With 11 Key Remote Control.
1 To 1 Remote Paired. Autosave Function, Both Are The Same Frequency; Turn Off The Remote, Press The Keys "Speed-" And "Speed+" In 5 Seconds, Then The Light Will Flash, They Will Be Different Frequencies..
Smooth Dimmer Effect. Speed And Brightness Adjustable.
Voltage: Dc 12-24V ,Output Current: 6A.
Features
- Can be used to control LED single color strip lights
- Voltage: DC 12-24V ,Output Current: 6A
- Very easy to operate, Comes with 11 key Remote Control
- Smooth Dimmer Effect. Speed and brightness adjustable
- 1 to 1 remote paired. Autosave function, Both are the same frequency; Turn off the remote, press the keys SPEED- and SPEED+ in 5 seconds, then the light will flash, they will be different frequencies.
- See more on Amazon...
Brand: LEDLightsWorld | Manufacturer: LEDLightsWorld
Weight: 0.11 pounds
See On Amazon #7
SUPERNIGHT 12V 30A Switching Power Supply, 110-240 Volt AC to DC 360W Universal Regulated Switching Transformer Adapter Driver for 3D Printer, CCTV, Radio, LED Strip Lights,Computer Project
Asin: B01LATMSGS | Model: 4328505387 | PartNumber: 4328505387
Smart Chip Provide Overcharge/ Overload/ Short-Circuit/ Over-Heat Protection, Auto-Recovery Protection.
We Promise 30 Days Worry-Free Return, 1 Year Replacement Assurance, Lifetime After-Sale Service, 24H X 7Day Customer Service Support.
Perfect For 3D Printer , Ham Radio Transceiver , Car Subwoofer Amp Audio Amplifier , Rc Lipo Chargers And Led Strips.
High Quality Switching Power Supply, Stable 12V Output, Protect Your Electronic Products From Destruction.
Features
- Input: 100V-240V, 50/60Hz; Output Voltage:12V DC, Output Current: 0 ~ 30A,Output Voltage adjustable range: 10%
- High quality switching power supply, stable 12V output, protect your electronic products from destruction
- Smart chip provide overcharge/ overload/ short-circuit/ over-heat protection, Auto-recovery protection
- Perfect for 3D Printer , ham Radio Transceiver , Car Subwoofer amp Audio Amplifier , RC LiPo Chargers and LED Strips
- We promise 30 days worry-free return, 1 year replacement assurance, lifetime after-sale service, 24H x 7Day customer service support
- See more on Amazon...
Brand: SUPERNIGHT | Manufacturer: SUPERNIGHT
See On Amazon #8
Solidremote 12V - 24V Secure Wireless RF Remote Control Relay Switch Universal 2-Channel Receiver with 2 Transmitters for Garage Door Openers, LED Lights etc (KIT-1)
Asin: B01JGDV8UM | Model: SR-RCS-202U | PartNumber: SR-RCS-202U | Ean: 0708296998994 | UPC: 708296998994
Enclosure # Designed To Work Both Indoor And Outdoor, Default Enclosure Supplied Protects The Inner Radio Receiver Circuit Board Safe From Rain Or Other Tough Weather, While Customer Can Also Use Chemical Glue Or Epoxy Adhesive To Seal The Wiring Holes After Setup, Providing Ip55 Equivalent Waterproof Protection Level. Mounting Holes Are Provided For Easy Installation To Walls Etc Using Screws..
Applications # Used In Anti-Theft Alarm Control Panels, Home Automation Systems, Short And Long Range Turn Devices On / Off Wirelessly, Lifts, Boats, Marine, Winches, Motor-Driven Curtain, Roller Blinds, Overhead Garage Door & Gate Barriers, Motorcycles, Vehicles, Cars, Truck, Industrial And Agricultural Electrical Control Such As Water Pumps & Sprayer, Electric Door Release Locks, Windows, Manual Switches Extender, Led Lighting Lamp Bulbs And Strips, Entrance And Access Control Etc..
Interface # 3-Level Efficient Switching Power Supply System. Our 202U Receiver Board Accepts 12 Volts - 24 Volts Ac Or Dc Wide Supply Voltage Range (Min. Current Rating Is 110Ma@12V Dc). Each Relay Can Switch Up To 10A @14V Dc Or 10A @125V Ac For Resistive Load (6A @14Vdc For Inductive Load). Built-In Small Dc Motor / Solenoid Polarity Reversing Control Capability By Using Interlock Latching Mode And Both Relays..
Easy & Flexible # Two Independent Relay Channels Can Either Work Together (In Latching) For Polarity Reversing Or Individually (In Pulse / Hold) To Control Different Electronics, Such As One Channel For Garage Door Controller Unit, The Other For Entry Lights. Easy Programming & Easy To Use Dip Switches Working Mode Selection Between Pulse / Momentary, Hold / Toggle And Latching Mode..
Features
- SECURE # Rolling code key fob device offers better security and far more code combinations (more than 18 quintillion - 18 x 10^18 possibilities, nearly a trillion more than typical fixed code or so-called learning code ones) and built on new platform using higher RF sensitivity -113dBm superheterodyne module for better long range and more stable performance.
- EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode.
- ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level. Mounting holes are provided for easy installation to walls etc using screws.
- INTERFACE # 3-Level efficient switching power supply system. Our 202U receiver board accepts 12 volts - 24 volts AC or DC wide supply voltage range (min. current rating is 110mA@12V DC). Each relay can switch up to 10A @14V DC or 10A @125V AC for resistive load (6A @14VDC for inductive load). Built-in small DC motor / solenoid polarity reversing control capability by using interlock latching mode and both relays.
- APPLICATIONS # Used in anti-theft alarm control panels, home automation systems, short and long range turn devices on / off wirelessly, lifts, boats, marine, winches, motor-driven curtain, roller blinds, overhead garage door & gate barriers, motorcycles, vehicles, cars, truck, industrial and agricultural electrical control such as water pumps & sprayer, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.
- See more on Amazon...
Brand: Solidremote | Manufacturer: Solidremote Technologies Ltd
Dimensions: 2.16 x 4.72 x 2.83 Inches
See On Amazon #9
EBL 9V Rechargeable Batteries Lithium ion 9V 600mAh Batteries 600mAh (5 Packs) with 5 Bay 9V Battery Charger 2A Input for Smoke Alarm Detectors
Asin: B072ND49S9 | Model: EBL-503-9V*5 | PartNumber: EBL-503-9V*5 | Ean: 0709445072015 | UPC: 709445072015
Advanced Mcu Control System: Intelligent △V And -△V Cut-Off Charging Method, Automatically Trickle Charging Mode Help To Prevent Over-Voltage, Over-Current And Over-Heat..
Recommended For Smoke Alarms, Professional Audio,Digital Cameras, Toys And Many Other Medical Devices..
Battery Storage Case: Packed With 9V Battery Storage Case, Easy To Storage Batteries, Very Convenient For Taking And Travelling..
Unique Usb Design: Usb Input, Connect The Charger To Power, 2A Input Suggested, More Convenient, Worldwide Usage..
Features
- EBL 503 iQuick Smart Charger: Individually compatible for 1/2/3/4/5 pcs 9V Li-ion Rechargeable Battery, even and uneven supported.
- Unique USB design: USB Input, connect the charger to power, 2A input suggested, more convenient, worldwide usage.
- Advanced MCU control system: Intelligent V and - V cut-off charging method, automatically trickle charging mode help to prevent over-voltage, over-current and over-heat.
- Battery Storage Case: Packed with 9V battery storage case, easy to storage batteries, very convenient for taking and travelling.
- Recommended for smoke alarms, professional audio,digital cameras, toys and many other medical devices.
- See more on Amazon...
Brand: EBL | Manufacturer: EBL
Dimensions: 2.00 x 30.80 x 4.52 inches | Weight: 0.50 pounds
See On Amazon #10
TOPENS TC188 Universal Wireless Wired Keypad Keyless Entry Keypad Waterproof Digital Code Panel Security Control for Automatic Swing Sliding Gate Opener Garage Door Opener, Remote Operator Accessory
Asin: B09VGTCCJQ | Model: TC188 | PartNumber: TC188 | Ean: 0793513179379, 0793513179324 | UPC: 793513179324, 793513179379
Safe To Use - Supports Up To 64 Individual Sets Of 4-Digit Access Codes, Including The Temporary And Permanent Codes. Temporary Password Is Easy To Manage And Programmed For The Guests / Deliveryman. You Can Add This Tc188 Keypad On The Entrance, Exit, Or Both Sides Of Your Gate. Our Advanced Topens Code Technology Will Prevent Unwanted Entry, Ensuring Multiple Protection & Safety. Additionally, This Dual Channel Transmitter Design Will Access Two Different Openers Separately..
Wireless & Wired Mode - Comes With A 6F22 Carbon Battery, The Wireless Mode Is Recommended For Less Wire Connections. Easy Diy Installation & Simple Programming Within Minutes. Connected With Our Erm12 External Receiver (Sold Separately), This Digital Keypad Will Operate The Third-Party Gate Opener In This Mode. On The Other Hand, The Wired Mode Is A Good Solution In Locations Where Frequency Interference Is Occurred Or Where The Control Box Is Installed Far Away From The Gate Operator..
Wide Compatibility - Works With All Topens Gate Openers, And Compatible With Most Third Party Swing / Sliding Gate Opener Or Garage Door Opener Whose Control Board Accepts “Normally Open Dry Contact” Signal. Tc188 Can Be Powered By The 9Vdc Carbon Battery (Included In The Package), Or The Control Board Of The Gate Opener, Or By The External 9-24Vac/Dc Power Source. Kindly Note That This Keypad Works With The Gate / Garage Door Openers Only, And Does Not Support Other Door Access Control System..
Clever Design - This Keypad Is Suitable For The Household, Courtyard, Farm, Ranch, Warehouse And Other Commercial / Industrial Sites. Weather-Resistant For All Seasons Of The Year. The Led Backlight Automatically Illuminates The Keypad Under Low-Light Conditions. Made Of High-Quality Heat-Resistant And Durable Anti-Deformation Materials, The Device Offers Stable Protection In Bad Weather Conditions And Provides A Long-Lasting Performance. The Battery Lasts Up To 2 Years At 5 Activations Per Day..
Features
- Universal Keypad - TOPENS TC188 Universal Keypad is a smart access control keypad with advanced TOPENS code technology. Simply enter a short password to open the gate without carrying a key. The flexible connection modes of wired & wireless are for your selection. Designed as an ideal accessory for security, this numeric keypad greatly improves the experience of keyless operation. It brings high convenience for controlled access, making an easy way for guests to access your gate opener system.
- Clever Design - This keypad is suitable for the household, courtyard, farm, ranch, warehouse and other commercial / industrial sites. Weather-resistant for all seasons of the year. The LED backlight automatically illuminates the keypad under low-light conditions. Made of high-quality heat-resistant and durable anti-deformation materials, the device offers stable protection in bad weather conditions and provides a long-lasting performance. The battery lasts up to 2 years at 5 activations per day.
- Safe to Use - Supports up to 64 individual sets of 4-digit access codes, including the temporary and permanent codes. Temporary password is easy to manage and programmed for the guests / deliveryman. You can add this TC188 Keypad on the entrance, exit, or both sides of your gate. Our advanced TOPENS code technology will prevent unwanted entry, ensuring multiple protection & safety. Additionally, this dual channel transmitter design will access two different openers separately.
- Wide Compatibility - Works with all TOPENS gate openers, and compatible with most third party swing / sliding gate opener or garage door opener whose control board accepts Normally Open Dry Contact signal. TC188 can be powered by the 9VDC carbon battery (included in the package), or the control board of the gate opener, or by the external 9-24VAC/DC power source. Kindly note that this keypad works with the gate / garage door openers only, and does not support other door access control system.
- Wireless & Wired Mode - Comes with a 6F22 carbon battery, the wireless mode is recommended for less wire connections. Easy DIY installation & simple programming within minutes. Connected with our ERM12 External Receiver (sold separately), this digital keypad will operate the third-party gate opener in this mode. On the other hand, the wired mode is a good solution in locations where frequency interference is occurred or where the control box is installed far away from the gate operator.
- See more on Amazon...
Brand: TOPENS | Manufacturer: TOPENS
Dimensions: 1.57 x 4.53 x 2.76 inches
See On Amazon #11
DROK 4-20mA Generator, Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing
Asin: B071NLGP6L | Model: 300482 | PartNumber: 300482
Features
- AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by 1 module, which generate 0/4 - 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #12
CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable
Asin: B086YT49H7 | Model: 4A420 | PartNumber: 4A420 | Ean: 0689749968811 | UPC: 689749968811
Accurate & Dependable: Offers A Sensing Range Of 1 To 50 Amps And Universal, Solid-State Outputs; Accuracy: 1%.
Note: If You Want To Test The Operation Of The Sensor Switch, A Load Must Be Applied Across The No Contacts; Otherwise, It Will Not Work..
Faster Response Time: Once Current Flow Is Detected, It Closes A Set Of Contacts Immidiately; Response Time: ≤200Ms.
Self-Powered, No External Power Supply Required.
Features
- N.O. Universal Outputs: 2.5A @ 120 VAC/240VAC; In 240V circuit, only one 120V hot line is connected.
- Self-powered, no external power supply required
- Accurate & Dependable: Offers a sensing range of 1 to 50 amps and universal, solid-state outputs; Accuracy: 1%
- Faster Response Time: Once current flow is detected, it closes a set of contacts immidiately; Response Time: 200ms
- NOTE: If you want to test the operation of the sensor switch, a load must be applied across the NO contacts; otherwise, it will not work.
- See more on Amazon...
Brand: CrocSee | Manufacturer: CrocSee
See On Amazon #13
SUPERNIGHT DC 12V 24-Key LED Strip IR Remote Controller with Controller Box for 3528 5050 SMD RGB LED Strip Lights
Asin: B01K7G96E2 | Model: 43239-269377 | PartNumber: 43239-269377 | Ean: 6921407809000
Adjustable Brightness: The Remote Control Can Adjust The Brightness Of The Light, Which Is Equivalent To A Dimmer..
High Quality: The Controller Is Made Of High-Quality Plastic Shell, Will Not Be Easily Damaged And Has A Long Service Life..
Can Be Hung Up: There Are 2 Small Holes On The Controller That Can Be Hung To The Desired Position..
Wireless Remote Control: The Remote Control Can Control The Rgb Controller Wirelessly, And You Can Remotely Control The Lighting Effects You Like..
Features
- Multiple modes: 16 kinds of static light colors can be changed at will, and there are 4 dynamic lighting effects of flash, strobe, fade, and smooth.
- Wireless remote control: The remote control can control the RGB controller wirelessly, and you can remotely control the lighting effects you like.
- Adjustable brightness: The remote control can adjust the brightness of the light, which is equivalent to a dimmer.
- Can be hung up: There are 2 small holes on the controller that can be hung to the desired position.
- High quality: the controller is made of high-quality plastic shell, will not be easily damaged and has a long service life.
- See more on Amazon...
Brand: SUPERNIGHT | Manufacturer: SUPERNIGHT
Dimensions: 1.40 x 2.40 x 0.90 inches
See On Amazon #14
HiLetgo 5 Sets 433M Transmitter + Receiver Kit High Frequency Super Regenerative Transceiver Module for Burglar Alarm
Asin: B01DKC2EY4 | Model: 3-01-0420-A | PartNumber: 3-01-0420-A
They Work In Pairs, Meaning You Need Both A Receiver And A Transmitter To Comunicate With Each Other.
This Radio Transmitter & Receiver Pair Is Perfectly Matched To Allow You To Control Items From A Distance Up To 500 Feet Wirelessly!.
Compatible With Sparkfun’S 434Mhz Rf Transmitter And Rf Receiver.
Wireless Transmitter Modules Allow Your Arduino To Wirelessly Comunicate With Other Arduinos, Or With Radio Frequency (Rf) Controlled Devices That Operate In The Same Frequency (433Mhz In This Case).
Features
- Easy to use, nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without pulling cables then this device will help you well
- Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that operate in the same frequency (433Mhz in this case)
- They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other
- Compatible with SparkFun s 434MHz RF transmitter and RF receiver
- This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly!
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #15
3 Volt 1 Amp Power Supply 3W 3Volt 1Amp AC/DC Adapter 100-240V 50-60Hz to DC 3V 1A Power Adapter Supply for Mini Fan Speakers Electric Toothbrush Fountains etc.
Asin: B09Z324T1X | Model: CJ-0310 | PartNumber: CJ-0310 | Ean: 0619191548958 | UPC: 619191548958
Dc 3V Power Cord With 5.5Mm X 2.5Mm Plug. Dc Output Port Od Is 5.5Mm, Id Is 2.5Mm. The Polarity Of Inside Is Positive [+], Outside Is Negative [-]. Please Kindly Check Your Device Model, Output And Plug Size Before Buying, And Would Make Sure That The Size Of The Plug Of The Adapter Can Match Your Devices..
Multiple Protections With Smart Chip To Ensure The Safety And Stability: Automatically Over Temperature Cut-Off, Short-Circuit Cut-Off, Under-Voltage Protection, Over Voltage Cut-Off And Over-Current Cut-Off..
【 What You Will Get 】1X 3V 1A Dc Power Adapter Supply . 100% Quality Guarantee, Worry-Free Shopping. 24-Month Warranty And Friendly Customer Service. We Always Stand Behind Our Product. If Any, A Full Refund / Replacement Free Would Be Available And Return Is Not Necessary[In Order Not To Cause You Trouble, One Email To Us Is Ok]..
Sufficient 3 Watts Output Power And Stable 3 Volts Output Voltage Will Protect Your Electronic Devices From Destruction..
Dc 3V 1A Power Supply Will Be Used For 3V Devices Less Than 3W, Such As Mini Fan, Speakers, Electric Toothbrush, Fountains And More Dc 3V 1A Devices..
Features
- Input: 100V-240V 50/60Hz; Output: DC 3V, 1A (1000mA) 3W Max.; Works with device that draws less than 1A, such as 0.2A, 0.5A, 0.8A, 1A
- DC 3V 1A Power Supply will be used for 3V devices less than 3W, such as Mini Fan, Speakers, Electric Toothbrush, Fountains and more DC 3V 1A Devices.
- DC 3V Power Cord with 5.5mm x 2.5mm Plug. DC output port OD is 5.5mm, ID is 2.5mm. The polarity of inside is Positive [+], outside is Negative [-]. Please kindly check your device model, output and plug size before buying, and would make sure that the size of the plug of the adapter can match your devices.
- Sufficient 3 Watts output power and stable 3 Volts output voltage will protect your electronic devices from destruction.
- Multiple Protections with smart chip to ensure the safety and stability: automatically over temperature cut-off, short-circuit cut-off, under-voltage protection, over voltage cut-off and over-current cut-off.
- What you will get 1x 3V 1A DC Power Adapter Supply . 100% quality guarantee, worry-free shopping. 24-month warranty and friendly customer service. We always stand behind our product. If any, a full refund / replacement free would be available and return is not necessary[In order not to cause you trouble, one email to us is OK].
- See more on Amazon...
Brand: Arybroourd | Manufacturer: Anrytech
Dimensions: 1.06 x 3.07 x 1.77 Inches | Weight: 0.15 pounds
Warranty: 2 years manufacturer
See On Amazon #16
BANVIE Car Alarm System, Security Antitheft Alarm Systems with Keyless Entry, with Microwave Sensor & Shock Sensor
Asin: B07LF7YBNF | Model: 8542136625 | PartNumber: 8542136625 | Ean: 0727523074942 | UPC: 727523074942
【Antitheft Alarm】There Is A 110Db Siren With 6 Tons For This Car Alarm, Alarming Could Be Triggered By Shock Sensor & Microwave Sensor Alarm And Side Door Opening. Silent Car Alarm Model Could Aslo Be Set..
【Central Door Locking Automation】Car Door Will Auto-Lock After Driving, And Unlock After Key Turned To Acc Off, So It Will Very Safe For Children In Car. This Function Could Be Set On Or Off(Factory Default Is On)..
【Engine Blocking】This Car Alarm Contains An Engine Cut-Off Relay. In Arm Status, It Can Cut Off Engine Power And Make Engine Fail To Start. In Running, It Can Cut Off Power To Come With Anti-Hijacking Function..
【Keyless Entry】This Antitheft Alarm Systems Have All Basic Keyless Entry Functions, Such As Lock/Unlock, Car Finding, Trurnk Release, Light Flash, Power Window(Original Close Model Required), Etc..
Features
- Universal design This car alarm system could fit for most of DC 12V cars(except old petrol cars). The remote controller has a zinc alloy frame, all buttons have good resilience.
- Keyless entry This antitheft alarm systems have all basic keyless entry functions, such as lock/unlock, car finding, trurnk release, light flash, power window(original close model required), etc.
- Antitheft alarm There is a 110dB siren with 6 tons for this car alarm, Alarming could be triggered by shock sensor & microwave sensor alarm and side door opening. Silent car alarm model could aslo be set.
- Engine blocking This car alarm contains an engine cut-off relay. In arm status, it can cut off engine power and make engine fail to start. In running, it can cut off power to come with Anti-hijacking function.
- Central door locking automation Car door will auto-lock after driving, and unlock after key turned to ACC OFF, So it will very safe for children in car. this function could be set ON or OFF(factory default is ON).
- See more on Amazon...
Brand: BANVIE | Manufacturer: BANVIE
See On Amazon #17
Yiliaw 44 Keys IR Remote Controller Kit, Wireless Rectifier Control Box and DC 12V 5A 60W Power Supply Adapter, Replacement Control for SMD 5050 3528 2835 RGB LED Strip Lights
Asin: B0C9ZTB9Z2 | Model: 443TKZQ | PartNumber: 443TKZQ
【Led Light Adapter】Input: 100-240V 50/60Hz, Output: Dc 12V 5A, And Us Power Supply Adapter Is Included(Note: Not Compatiable With 24V Led Strip Light)..
【Notice】 If There Is No Response When You Use The Remote Control, It May Be Because The Battery Inside The Remote Control Is Placed In The Wrong Direction. You Can Reverse The Direction Of The Remote's Batteries And Reposition Them. Please Press The Power Button Before Use..
【44 Key Ir Remote Controller】It Have A Performance Range Of About 30 Feet. Please Note: Ir Remotes Must Be Pointed Directly At The Devices You Are Trying To Control..
【Kindly Compatible】Work With 5050 2835 3528 Rgb Led Light Strips With 4-Pin Connectors. Not For Rgbw Strips Which Has 5-Pin Connectors..
Features
- Interesting Multi-Function You can choose 20 static colors with adjust brightness, turn On/Off. And multiple control modes: Flash, Strobe, Fade, RGB Smooth-change, Static, DIY frequently, use modes as you like.
- Kindly Compatible Work with 5050 2835 3528 RGB led light strips with 4-Pin connectors. Not for RGBW strips which has 5-pin connectors.
- LED Light Adapter Input: 100-240V 50/60Hz, Output: DC 12V 5A, and US Power Supply Adapter is included(NOTE: Not compatiable with 24V led strip light).
- 44 Key IR Remote Controller It have a performance range of about 30 feet. Please note: IR remotes must be pointed directly at the devices you are trying to control.
- NOTICE If there is no response when you use the remote control, it may be because the battery inside the remote control is placed in the wrong direction. You can reverse the direction of the remote's batteries and reposition them. Please press the power button before use.
- See more on Amazon...
Brand: Yiliaw | Manufacturer: Yiliaw
See On Amazon #18
9.3'' Portable Wireless Apple Carplay Screen with HD 2.5K Front and Rear Backup Camera,Podofo Android Auto Touch Screen Bluetooth Radio with GPS Voice Control 64G TF Card,Car Play Screen for Car
Asin: B0C1MNSZKN
🚗【Plug And Play, Fit For All Cars】This Portable Car Stereo Comes With A Strong Stand Can Be Mounted Directly On The Center Console. Compatible With 7-32V Car Dc Voltage, And You Don't Need To Disassemble Your Car's Console, Keep Your Car Original Radio, Perfect Coexistence. This Makes It A Convenient And Accessible Option For All Car Owners, Regardless Of Their Vehicle Make Or Mode..
💖【Customer Service And Technical Support】We Offer 30-Day Money-Back, 12-Month Replacement, Life-Time Technical Support. Please Feel Free To Contact Us If You Have Any Questions, We Will Reply To You Within 18 Hours And Help You Solve The Problem..
🚗 【Upgraded Bluetooth Audio Output】Upgraded Bt Audio Output Options For This Car Play Screen Allows You To Directly Connect To Your Car's Bluetooth To Emit The Sound Of Carplay And Android Auto To The Car's Own Speakers, Enjoying The Best And The Most Stable And High-Quality Stereo Sound Through The Original Car Audio System. You Can Also Use Aux Connection, Fm Transmitter, And The Built-In Speaker To Get Audio..
🚗【Bluetooth & Maps Navigation】Our This Dash Cam Built-In Bluetooth, You Can Listen To Wireless Music, Receive And Make Hands-Free Calls Without Being Disturbed While Driving. You Can Get Maps Via Carplay/Android Auto Function Easily, Drivers Can Access Maps, Directions, And Traffic Information Directly From The 9.3-Inch Monitor. (Kindly Note This Car Stereo Not Supports Gps Itself).
Features
- Wireless Apple Car Play Android Auto Portable wireless apple carplay screen with the built-in wireless CarPlay and Android Auto, you can seamlessly connect your phone to the stereo for a safer driving experience, keeping your eyes focused on the road ahead while easily accessing apps, music, and maps through the dash screen's interface,effortlessly control your Phone using Siri's or Goo-gle's voice commands.
- Bluetooth & Maps Navigation Our this dash cam built-in Bluetooth, you can listen to wireless music, receive and make hands-free calls without being disturbed while driving. You can get maps via carplay/android auto function easily, drivers can access maps, directions, and traffic information directly from the 9.3-inch monitor. (Kindly note this car stereo not supports GPS itself)
- Plug and Play, Fit for All Cars This portable car stereo comes with a strong stand can be mounted directly on the center console. Compatible with 7-32V car DC voltage, and you don't need to disassemble your car's console, keep your car original radio, perfect coexistence. This makes it a convenient and accessible option for all car owners, regardless of their vehicle make or mode.
- Upgraded Bluetooth Audio Output Upgraded BT audio output options for this car play screen allows you to directly connect to your car's bluetooth to emit the sound of carplay and android auto to the car's own speakers, enjoying the best and the most stable and high-quality stereo sound through the original car audio system. You can also use AUX connection, FM Transmitter, and the built-in speaker to get audio.
- Customer Service and Technical Support We offer 30-day Money-Back, 12-month Replacement, life-time Technical Support. Please feel free to contact us if you have any questions, we will reply to you within 18 hours and help you solve the problem.
- See more on Amazon...
Brand: podofo | Manufacturer: podofo
Dimensions: 9.00 x 1.50 x 5.00 Inches | Weight: 0.07 pounds
Warranty: 2 Year on Labor and Part
See On Amazon #19
DieseRC 433Mhz Universal Wireless Remote Control Switch DC 12V 1CH RF Relay Receiver Module with 2 Transmitters, EV1527 Learning Code Remote Switch
Asin: B098X9GFGB | Model: 1201+KT03 | PartNumber: 1201+KT03 | Ean: 0750828381354 | UPC: 750828381354
【More Flexibility】This Receiver Adopts 10A Relay, Which Can Load High-Power Electrical Appliances To Ensure Long-Term Stability Control.There Are 3 Terminals(Normally Open, Common, Normally Closed) For The Wireless Relay..
【Wide Application】Products Can Be Used In Homes, Farms, Factories, Offices, Laboratories, Supermarkets And So On.You Can Remotely Operate Every Device Connect With The Relay Receiver Through The Remote Control. Such As, Electric Lock, Electromagnetic Door,Fan, Lamp, Lighting, Ventilation Device,Water Pump, Signal Transmission And Diy Remote Control Switch..
【Quality Assurance】High-Quality Relay That Can Be Used Over 100,000 Times.Let This Product Is More Long-Lasting And Stable To Use. The High-Power Terminal Can Withstand A Current Of 15A, So That This Product Can Have A Good Effect Even When The Current Is Unstable..
【Strong Signal Reception】There Is An Antenna On The Receiver,So That You Can Stretch It By Yourself To Get A Stronger Signal Reception..
【Multiplayer Control】One Receiver Can Store About 20 Transmitters. So You Can Share The Transmitters To Family/ Friends.All Of You Can Remote Control The Device Connect With The Relay Receiver. And One Transmitter Can Control Multiple Receivers Too..
【Secure System】The Code Of The Chip Is Ev1527 Learning Code Which Is The Most Popular Technology That Making The Remote Control System More Security. Other Transmitters Cannot Control Your Receiver Unless Them Have Been Set Up With Your Receivers..
【Operational Safety】The Voltage Of This Receiver Is 12V. The Operation Is Very Safe.The Terminal Is A Screw Buckle, Convenient And Safe..
【High Quality Remote Control】The Remote Control Has A Long Service Life. There Is A Screw Port On The Back Of The Transmitter, And The Battery Can Be Replaced After Disassembly. The Battery Is Cr2016.It Is So Easy To Purchase..
【Easy To Use】Extremely Easy To Set Up And Reset. There Are 4 Operating Mode(Momentary/Toggle/Latched/Delay Mode) Can Be Chosen.You Can Easily Set Up By Yourself Depends On Your Needs. The Operating Mode Of The Product Is Adjustable.This Item Has Already Been Set Up In Latched Mode..
Features
- Great design 433Mhz RF wireless remote control switch.Stable and reliable performance with high reception sensitivity (> 97dBm). Radio frequency signal transmission.Strong signal can pass walls, floors, doors,board and so on.It can be controlled within 50 meters distance in open area. You can remotely operate every machine connect with the relay receiver through the remote control.
- Easy to use Extremely easy to set up and reset. There are 4 operating mode(momentary/toggle/latched/delay mode) can be chosen.You can easily set up by yourself depends on your needs. The operating mode of the product is adjustable.This item has already been set up in latched mode.
- More Flexibility This receiver adopts 10A relay, which can load high-power electrical appliances to ensure long-term stability control.There are 3 terminals(normally open, common, normally closed) for the wireless relay.
- Operational safety The voltage of this receiver is 12V. The operation is very safe.The terminal is a screw buckle, convenient and safe.
- Multiplayer control One receiver can store about 20 transmitters. So you can share the transmitters to family/ friends.All of you can remote control the device connect with the relay receiver. And one transmitter can control multiple receivers too.
- Secure System The code of the chip is EV1527 learning code which is the most popular technology that making the remote control system more security. Other transmitters cannot control your receiver unless them have been set up with your receivers.
- Quality Assurance High-quality relay that can be used over 100,000 times.Let this product is more long-lasting and stable to use. The high-power terminal can withstand a current of 15A, so that this product can have a good effect even when the current is unstable.
- Strong Signal Reception There is an antenna on the receiver,so that you can stretch it by yourself to get a stronger signal reception.
- High Quality Remote Control The remote control has a long service life. There is a screw port on the back of the transmitter, and the battery can be replaced after disassembly. The battery is CR2016.It is so easy to purchase.
- Wide Application Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.You can remotely operate every device connect with the relay receiver through the remote control. such as, electric lock, Electromagnetic door,fan, lamp, lighting, ventilation device,water pump, signal transmission and DIY remote control switch.
- See more on Amazon...
Brand: DieseRC | Manufacturer: DieseRC
Dimensions: 0.15 x 0.35 x 0.35 inches
See On Amazon #20
ECO-WORTHY Linear Actuator Motor Controller, Remote Positive Inversion Control Kit for Linear Actuator, Forward Reverse Remote Control System 12V DC
Asin: B079K8D3YK | Model: ZWN-RSM1-PLUS | PartNumber: ZWN-RSM1-PLUS
There Is A Manual Switch With The Controller, The Positive &Negative Rotation Plays The Role As The Limit Switch Protection..
4 Keys Remote Control More Stable. Remote Control Distance: Less Than 164 Feet /50 Meter..
The Remote Control Can Be Inching Control And Self-Lock Control..
The Controller’S Power Supply Is Dc8--35V, It Has The Function Of Reverse Connection Protection..
Features
- The main function of this set of controller is to control the positive &negative rotation of the DC motor, generally used for linear actuators.
- The controller s power supply is DC8--35V, it has the function of reverse connection protection.
- There is a manual switch with the controller, the positive &negative rotation plays the role as the limit switch protection.
- The remote control can be inching control and self-lock control.
- 4 keys remote control more stable. Remote control distance: less than 164 feet /50 meter.
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
Dimensions: 2.00 x 5.00 x 3.00 inches
See On Amazon
Looking For Something Else?
Search