iJDMTOY Dual 9005/9006 (M) to H13 (F) Wiring Adapters Compatible with Lighting Retrofit/DIY Purpose
Asin: B0CTN1RJ3N | Model: Wiring Wire Harness Adapter Connector(s) | PartNumber: Wiring Wire Harness Adapter Connector(s)
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Constructed With 18Awg Wiring Featuring Heat-Resistant Insulation, Copper Contacts, And Durable Nylon Adapters/Connectors For Reliable Performance.
Good For Repair, Replacement And Retrofit Use Purposes.
Ideal For Effortlessly Transitioning Hi/Lo Or Dual 9006/9005/H10 Setups To H13/9008 Configuration In Projector Lens Retrofits And Front Or Fog Lamp Replacements, Both Stock And Aftermarket.
Approx 15-Inch Long, Pre-Wired For An Easy Plug And Play Installation Without Have To Modify The Stock Wires/Sockets At All.
Features
- (1 pair) dual 9006/9005/H10/9145 male 2-pin adapters with H13/9008 female socket adapter
- Approx 15-inch long, pre-wired for an easy plug and play installation without have to modify the stock wires/sockets at all
- Constructed with 18AWG wiring featuring heat-resistant insulation, copper contacts, and durable nylon adapters/connectors for reliable performance
- Ideal for effortlessly transitioning hi/lo or dual 9006/9005/H10 setups to H13/9008 configuration in projector lens retrofits and front or fog lamp replacements, both stock and aftermarket
- Good for repair, replacement and retrofit use purposes
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.05 pounds
See On Amazon Similar To iJDMTOY Dual 9005 9006 M
#1
iJDMTOY White 15-SMD High Power 9005 HB3 Replacement Bulb For DRL Light w/Decoder, Wirings Compatible With ILX TSX MDX TL RL Accord Civic CR-V CR-Z, etc
Asin: B01DTGB6QS | Model: 2008 2009 2010 2011 2012 2013 2014 2015 | PartNumber: 2008 2009 2010 2011 2012 2013 2014 2015
Powered By 15-Smd High Power Chips Per Bulb.
Replacing The Stock Hi_Beam Mode/Drl Bulb Size: 9005 Hb3.
Complete Error Free With No Flicker/Malfunction And The Replacement Bulbs Can Fully Light Up At The Drl Mode.
Compatible With Honda 2006-2015 Civic, 2006-2017 Accord, 2006-2016 Odyssey, 2009-2016 Ridgeline, 2009-2011 Element, 2009-2016 Pilot, 2010-2014 Insight, And 2011-2016 Cr-Z.
Features
- Compatible with Acura 2013-2015 ILX, 2009-2014 TSX, 2007-2013 MDX, 2007-2015 RDX, 2009-2014 TL and 2010-2013 ZDX
- Compatible with Honda 2006-2015 Civic, 2006-2017 Accord, 2006-2016 Odyssey, 2009-2016 Ridgeline, 2009-2011 Element, 2009-2016 Pilot, 2010-2014 Insight, and 2011-2016 CR-Z
- Powered by 15-SMD high power chips per bulb
- Complete error free with no flicker/malfunction and the replacement bulbs can fully light up at the DRL mode
- Replacing the stock Hi_Beam Mode/DRL bulb size: 9005 HB3
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.49 pounds
See On Amazon #2
iJDMTOY OEM 9005 HB3 H10 9145 Female Adapters Wiring Harness Sockets w/ 4-Inch Wire Pigtails Compatible with High/Low Beam or Fog Lights Use
Asin: B07MJHYY6N | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
The Nylon Female Plug Can Withstand Up To 1200 Fahrenheit And Is Connceted With Heavy Duty Ptfe Wire.
Perfect For Front Road Illuminating Light Or Fog Light Reapir, Retrofit, Or Extension Use.
Good For 9005 Hb3 H10 9145 9140 9155 Bulb Sizes.
Features
- Includes 1 pair of 4" pre-wired 9005 HB3 H10 9145 lamp connectors/adapters
- Good for 9005 HB3 H10 9145 9140 9155 bulb sizes
- The nylon female plug can withstand up to 1200 fahrenheit and is connceted with heavy duty PTFE wire
- Perfect for front road illuminating light or fog light reapir, retrofit, or extension use
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #3
iJDMTOY High/Low Relay Wire Harness Compatible with Original H4 Dual-Beam to Separated 9005/9006 Hi/Lo Beams
Asin: B01M15V3HK | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Perfect For Upgrading Halo, Retrofit, Projector And Aftermarket Front Lights.
Made With Heavy Duty Wirings And Adapters To Work Up To 150W.
Features
- Convert the original H4 bulb size harness to work with individual 9005 Hi_Beam Mode/9006 low beam
- Made with heavy duty wirings and adapters to work up to 150W
- Perfect for upgrading halo, retrofit, projector and aftermarket front lights
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.50 pounds
See On Amazon #4
iJDMTOY 9005 9006 9145 H10 Relay Wiring Harness Compatible with Automtive Driving Light, Running/DRL, Fog Light, Retrofit, Off-Road Lighting, etc
Asin: B00LLKHQNC | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
For Both Driver Side And Passenger Side.
Improved Easier Trigger Wire, You Just Need To Tap This One Piece To Any 12V + Or Fuse Box Acc To Draw Power.
Good For Add-On Fog Lights, Led Work Light, Xenon Led Conversion, Daylight Drls, Etc.
40Amp Relay; In-Line Safety Fuse Included.
Features
- Compatible bulb size: 9006 9012 HB4 9005 9145 9150 9155 HB3
- 40AMP relay; In-line safety fuse included
- For both driver side and passenger side
- Good for add-on fog lights, LED work light, xenon LED conversion, daylight DRLs, etc
- Improved easier trigger wire, you just need to tap this one piece to any 12V + or fuse box ACC to draw power
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.42 pounds
See On Amazon #5
iJDMTOY One Pair 9005 (M) to H4 (F) Hi-Beam Adapters Connectors Wires, Compatible with Automtive Driving Light, Running/DRL, Fog Light, Retrofit, Off-Road Lighting, etc
Asin: B09X9JH18T | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Convert Hi_Beam Mode 9005 Inputs (Female Ends From The Vehicle 12V Power Source) To H4/9003 Hi_Beam Mode Outputs (Male Ends With The Bulbs Or Light Applications).
Good For Front Road Illuminating Lamps Or Fog/Driving Lights Conversions Or Retrofit Works.
Also Work With 9145/H10 Or 9006 Input To H4/9003 Low Beam But Require To Re-Pin On The H4 Female Adapters.
Approx Length: 5 Inches Each, Made With High Quality 18Awg High Efficient Copper Core Wires With Heat Resistant Nylon Adapters/Sockets.
Features
- 2 pieces of 2-way adapter conversion wires
- Approx length: 5 inches each, made with high quality 18AWG high efficient copper core wires with heat resistant nylon adapters/sockets
- Convert Hi_Beam Mode 9005 inputs (female ends from the vehicle 12V power source) to H4/9003 Hi_Beam Mode outputs (male ends with the bulbs or light applications)
- Also work with 9145/H10 or 9006 input to H4/9003 low beam but require to re-pin on the H4 female adapters
- Good for front road illuminating lamps or fog/driving lights conversions or retrofit works
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.09 pounds
See On Amazon #6
iJDMTOY Pair OE-Spec 2-Pin 9005 Female End, Hi-Beam Mode or Fog Light Connector Plugs with Lead Pigtails, Compatible with Toyota/Lexus Lighting Replacements
Asin: B09Q59FRC1 | Model: One Pair 2-Way Black Socket Wire/ Pin | PartNumber: One Pair 2-Way Black Socket Wire/ Pin
Manufactured To Oe Specification For Fit, Form, And Function With Factory Components.
Much More Affordable Price! We Sell A Pair With Less Price Than Many Dealerships' One-Piece Price!.
Also Good For Many Other Vehicles For Repair, Replacement, Or Even Retrofit Works Since The Design Of The Socket Adapter Portions For The Same Bulb Size Are Pretty Much The Same.
One Pair (2 Pieces) 2-Way 9005 Hi_Beam Mode Or Fog Light Female Wiring Adapters With Leads And Approx 5" 18Ga Pigtails.
Features
- Compatible with many Toyota/Lexus/Scion(s) for fog light or DRL connection
- One pair (2 pieces) 2-way 9005 Hi_Beam Mode or fog light female wiring adapters with leads and approx 5 18ga pigtails
- Manufactured to OE specification for fit, form, and function with factory components
- Also good for many other vehicles for repair, replacement, or even retrofit works since the design of the socket adapter portions for the same bulb size are pretty much the same
- Much more affordable price! We sell a pair with less price than many dealerships' one-piece price!
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.05 pounds
See On Amazon #7
iJDMTOY 12000K Ice/Aqua Blue 69-SMD 9005 9145 H10 Replacement Bulbs, Compatible With Car SUV Truck For Fog Driving, DRL Lights
Asin: B06XGRNLL1
Size: 9005/Hb3 For Hi_Beam Mode, Function As Daylight Drl (For Some Vehicles You Might Need Special Wirings To Ensure The Driving/Drl Function Working Properly) Or 9145/H10 On Fog Lamp For Driving Light.
Fitment, Please Always Double Check The Bulb Size At Sylvania-Automotive.Com/Apps/Vlrg-Us/, Enter Your Vehicle's Year, Make And Model, Make Sure You See 9005 For Hi_Beam Mode Or 9145/H10 For Fog Lamps In Order To Use This Product.
Color: 12000K Aqua Blue, The Color Is Much Bluer Than The Xenon White, But Not As Deep Comparing With The Actual Blue Color Led Diodes (Please Double Check With Picture-2 To Compare The Differences).
Features
- (Pair of two) 69-SMD 1210-chipset LEDs per light bulb
- Color: 12000K aqua blue, the color is much bluer than the xenon white, but not as deep comparing with the actual blue color LED diodes (please double check with picture-2 to compare the differences)
- Size: 9005/HB3 for Hi_Beam Mode, function as daylight DRL (For some vehicles you might need special wirings to ensure the driving/DRL function working properly) or 9145/H10 on fog lamp for driving light
- Fitment, please always double check the bulb size at sylvania-automotive.com/apps/vlrg-us/, enter your vehicle's year, make and model, make sure you see 9005 for Hi_Beam Mode or 9145/H10 for fog lamps in order to use this product
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.13 Pounds
See On Amazon #8
iJDMTOY Error Free 68-SMD 9005 LED Daylight DRL Kit Compatible with Lexus is GS ES LS RX SC GX and LX
Asin: B008KPZQO2 | Model: 8542103466 | PartNumber: 8542103466
Work On Long Range Illumination Beam As Driving/Drls.
Compatible With 2006-2011 Lexus Is250, Is350 Or Is-F, 2006-2011 Lexus Gs300, Gs350, Gs450h Or Gs460, 2007-2011 Lexus Es350, 2007-2012 Lexus Ls460, 2008-2012 Lexus Ls600, 2010-2011 Lexus Rx350, 2002-2011 Lexus Sc430, 2010-2012 Lexus Gx460, 2008-2012 Lexus Lx570.
Plug-N-Play, No Error And No Malfunction Issue.
Color: 6000K Xenon White.
Features
- (Set of 2) 68-pieces 1210 SMD LED diodes per bulb + Special DRL Wiring Harness
- Color: 6000K Xenon White
- Work on long range illumination beam as driving/DRLs
- Plug-N-Play, No Error and No Malfunction Issue
- Compatible with 2006-2011 Lexus IS250, IS350 or IS-F, 2006-2011 Lexus GS300, GS350, GS450h or GS460, 2007-2011 Lexus ES350, 2007-2012 Lexus LS460, 2008-2012 Lexus LS600, 2010-2011 Lexus RX350, 2002-2011 Lexus SC430, 2010-2012 Lexus GX460, 2008-2012 Lexus LX570
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.58 pounds
See On Amazon #9
iJDMTOY 9006 9005 9145 H10 to Deutsch DT DTP Canbus Anti Flicker Resistor Canceller Decoders Compatible with LED Pod Light, LED Light Bars, LED Worklamps
Asin: B01NCOH08V | Model: For off-road cubic work light, lightbar | PartNumber: For off-road cubic work light, lightbar
These Anti-Flickering Decoders Will Fix Most Power Fluctuation Issues Such As Flickering. Flashing, Radio Interference, Led Light Turning Off When Engine Starts, Etc.
1) This Led Decoder Is Polar Sensitive, If You Plug In This Decoder And Replacement Bulb Does Not Light Up, Please Flip The Adapter 180 Degrees And Try Again 2) This Led Decoder May Not Work For All Vehicles. Some Exceptions Are Chrysle/Dodge Vehicles 3) For European Cars, This Decoders Might Not 100% (For The Led Front Road Illuminating Light Wattage Lower Than 55W Halogen Bulb Related "Bulb Out" Issue Showing On The Car On Board Computer, This Decoder Will Not Work).
Can-Bus With Anti-Flickering Capability. Good For Led Pod Light, Led Light Bar, Fog Lamps.
Features
- Quantity: 1 pair (2 pieces) 9006/HB4 9005/HB3 9145/H10 to Deutsch DT DTP canbus decoders
- Can-bus with anti-flickering capability. Good for LED pod light, LED light bar, fog lamps
- These anti-flickering decoders will fix most power fluctuation issues such as flickering. flashing, radio interference, LED light turning off when engine starts, etc
- 1) This LED decoder is polar sensitive, if you plug in this decoder and replacement bulb does not light up, please flip the adapter 180 degrees and try again 2) This LED decoder may not work for all vehicles. Some exceptions are Chrysle/Dodge vehicles 3) For European cars, this decoders might not 100% (for the LED front road illuminating light wattage lower than 55W halogen bulb related bulb out issue showing on the car on board computer, this decoder will not work)
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.33 pounds
See On Amazon #10
iJDMTOY Pair Plug-N-Play 9005 9006 9145 H10 LED Use Strobe Flash Module Box Controllers
Asin: B08NXZCYXD | Model: Emergency Strobing Flashing Warning Kit | PartNumber: Emergency Strobing Flashing Warning Kit
Input 12V Dc, Output 12V Dc, Wattage Up To 55W.
When You Turn On The Fog The First Time, The Light Will Stay Solid; When You Quickly Turn It Off And On Again, The Module Box Will Trigger The Strobe Flash Feature; Turn It Off And Wait About 2 Sec And Turn The Fog Back On, It Will Light Up Solid Again (See Demo Video).
Plug And Play For 9005 9006 9145 H10 Bulb Sizes, Good For H.I.D, Halogen Or Replacement Bulbs.
Features
- One pair left/right strobe flash enable modules for both driving or fog light use
- Plug and play for 9005 9006 9145 H10 bulb sizes, good for H.I.D, halogen or replacement bulbs
- Input 12V DC, Output 12V DC, Wattage up to 55W
- When you turn on the fog the first time, the light will stay solid; when you quickly turn it off and on again, the module box will trigger the strobe flash feature; turn it off and wait about 2 sec and turn the fog back on, it will light up solid again (see demo video)
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #11
iJDMTOY Pair OE-Spec 2-Pin 9005 Female End, Hi-Beam Mode Connector Plugs with Lead Pigtails, Compatible with Honda/Acura Lighting Replacements
Asin: B09Q57KZFC | Model: One Pair 2-Way Black Socket Wire/ Pin | PartNumber: One Pair 2-Way Black Socket Wire/ Pin
Manufactured To Oe Specification For Fit, Form, And Function With Factory Components.
Much More Affordable Price! We Sell A Pair With Less Price Than Many Dealerships' One-Piece Price!.
Also Good For Many Other Vehicles For Repair, Replacement, Or Even Retrofit Works Since The Design Of The Socket Adapter Portions For The Same Bulb Size Are Pretty Much The Same.
One Pair (2 Pieces) 2-Way 9005/Hb3 Driving Light Female Wiring Adapters With Leads And Approx 5" 18Ga Pigtails.
Features
- Compatible with many Honda/Acura for driving, fog light or DRL connection
- One pair (2 pieces) 2-way 9005/HB3 driving light female wiring adapters with leads and approx 5 18ga pigtails
- Manufactured to OE specification for fit, form, and function with factory components
- Also good for many other vehicles for repair, replacement, or even retrofit works since the design of the socket adapter portions for the same bulb size are pretty much the same
- Much more affordable price! We sell a pair with less price than many dealerships' one-piece price!
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.05 pounds
See On Amazon #12
iJDMTOY 9006 (M) to H7 (F) Adapters Connectors Wires, Compatible with Automtive Driving Light, Running/DRL, Fog Light, Retrofit, Off-Road Lighting, etc
Asin: B078JWQDYW | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Convert 9006/9005 Wirings Harness To Directly Install H7 Bulbs.
Good For Front Road Illuminating Lights Fog Lights Conversions Or Retrofit Works.
9006/Hb4 Or 9005/H10/9145/Hb3 To H7 Lamps Connectors.
Features
- 2 pieces per order
- 9006/HB4 or 9005/H10/9145/HB3 to H7 lamps connectors
- Convert 9006/9005 wirings harness to directly install H7 bulbs
- Good for front road illuminating lights fog lights conversions or retrofit works
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.09 pounds
See On Amazon #13
iJDMTOY Pair 9005/9006 2-Way Splitter Wires Compatible with High/Low Beam Quad/Dual Projectors or Fog Light Co-Operate Retrofit
Asin: B07MS99QYM | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Fit 9005 9006 Hb3 Hb4, Come With One Male Adapter And Two Female Adapters.
Perfect For Front Road Illuminating Light Hi/Lo Beam Dual/Quad Projector Diy Or Front Road Illuminating Light/Fog Lamp Co-Operate Together Retrofit Work.
Made With High Quality 20 Gauge Wires With Heat Resistant Nylon Plugs/Connectors.
Features
- 5 inches long Y-shape 2-way splitters
- Made with high quality 20 gauge wires with heat resistant nylon plugs/connectors
- Fit 9005 9006 HB3 HB4, come with one male adapter and two female adapters
- Perfect for front road illuminating light hi/lo beam dual/quad projector DIY or front road illuminating light/fog lamp co-operate together retrofit work
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.09 pounds
See On Amazon #14
iJDMTOY 69-SMD 9005 HB3 Replacement Bulbs Compatible With Front Lamp Datime Running Lighting, Xenon White
Asin: B008ANQZJ4 | Model: 2008 2009 2010 2011 2012 2013 2014 2015 | PartNumber: 2008 2009 2010 2011 2012 2013 2014 2015
Fitment: 9005, Hb3.
Work For Hi_Beam Mode And As Daylight Drl.
Color: 6000K Xenon White And Voltage: 12V.
Features
- (Set of 2) 69-pieces 1210 SMD LED diodes per bulb
- Color: 6000K Xenon White and Voltage: 12V
- Fitment: 9005, HB3
- Work for Hi_Beam Mode and as daylight DRL
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #15
iJDMTOY One Pair H4 (M) to 9005 (F) Hi-Beam Adapters Connectors Wires, Compatible with Automtive Driving Light, Running/DRL, Fog Light, Retrofit, Off-Road Lighting, etc
Asin: B09X94Y5KT | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Convert Hi_Beam Mode H4/9003 Inputs (Female Ends From The Vehicle 12V Power Source) To 9005 Hi_Beam Mode Outputs (Male Ends With The Bulbs Or Light Applications).
Good For Front Road Illuminating Lamps Or Fog/Driving Lights Conversions Or Retrofit Works.
Also Work With H4/9003 Low Beam Input To 9145/H10 Or 9006 Low Beam Output But Require To Re-Pin On The H4 Male Adapters.
Approx Length: 5 Inches Each, Made With High Quality 18Awg High Efficient Copper Core Wires With Heat Resistant Nylon Adapters/Sockets.
Features
- 2 pieces of 2-way adapter conversion wires
- Approx length: 5 inches each, made with high quality 18AWG high efficient copper core wires with heat resistant nylon adapters/sockets
- Convert Hi_Beam Mode H4/9003 inputs (female ends from the vehicle 12V power source) to 9005 Hi_Beam Mode outputs (male ends with the bulbs or light applications)
- Also work with H4/9003 low beam input to 9145/H10 or 9006 low beam output but require to re-pin on the H4 male adapters
- Good for front road illuminating lamps or fog/driving lights conversions or retrofit works
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.09 pounds
See On Amazon #16
iJDMTOY High/Low Conversion Relay Wire Harness Compatible with Original 9004/9007 Dual-Beam to Separated 9005/9006 Hi/Lo Beams
Asin: B01M0YNWYC | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Perfect For Upgrading Halo, Retrofit, Projector And Aftermarket Front Lights.
Made With Heavy Duty Wirings And Adapters To Work Up To 150W.
Features
- Convert the original 9004 9007 HB5 bulb size harness to work with individual 9005 Hi_Beam Mode/9006 low beam
- Made with heavy duty wirings and adapters to work up to 150W
- Perfect for upgrading halo, retrofit, projector and aftermarket front lights
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.63 pounds
See On Amazon #17
iJDMTOY High/Low Conversion Relay Wire Harness Compatible with Original H13/9008 Dual-Beam to Separated 9005/9006 Hi/Lo Beams
Asin: B08HVYNS2F | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Perfect For Upgrading Halo, Retrofit, Projector And Aftermarket Front Lights.
Made With Heavy Duty Wirings And Adapters To Work Up To 150W.
Features
- Convert the original H13 9008 bulb size harness to work with individual 9005 Hi_Beam Mode/9006 low beam
- Made with heavy duty wirings and adapters to work up to 150W
- Perfect for upgrading halo, retrofit, projector and aftermarket front lights
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.69 pounds
See On Amazon #18
iJDMTOY 5 Pairs OEM-Spec Clear Lens Automotive Use 12VDC 42W H10 9145 Halogen Replacement Bulbs for Fog Driving Light, High/Low Beam, etc
Asin: B0B4LWN9TJ | Model: OEM Spec Halogen Replacement Light Bulbs | PartNumber: OEM Spec Halogen Replacement Light Bulbs
12V Dc For Automotive Use.
Sae/Dot Approved, Good For Fog Driving Light And Some Drl Light Replacement.
Cross Reference Fitment 9005, Hb3, H10, 9055, 9140, 9145, 9150, 9155.
Oem Spec Clear Glass Lens.
Features
- Bulk/wholesale 5 pairs of H10/9145 halogen replacement bulbs
- OEM spec clear glass lens
- 12V DC for automotive use
- Cross reference fitment 9005, HB3, H10, 9055, 9140, 9145, 9150, 9155
- SAE/DOT Approved, good for fog driving light and some DRL light replacement
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.25 Pounds
See On Amazon #19
iJDMTOY Pair 9005/9145/H10/9006/HB4 Male Adapter w/ 50W 6-Ohm Load Resistor Bypass Decoders
Asin: B0BGJW35QB | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Fit 9005 9006 9012 9140 9145 9150 9155 Hb3 Hb4 H10, Etc.
Since The Load Resistor Will Generate A Lot Of Heat, Please Mount The Resistor Equalizer To Metal.
Bypass Existing Fog/Driving Lights, Good For Adding Or Replacing Existing Halogen Bulbs With Led Lights And Avoid Any Led Related Bulb Out Warning Pop Up On Dashboard.
900-Series 9005/Hb3, 9145/H10, 9006/Hb4 Male End Connector With Inline 50W 6-Ohm Load Resistor Equalizer.
Features
- One pair decoder wires (wiring approx. length of 9")
- 900-Series 9005/HB3, 9145/H10, 9006/HB4 male end connector with inline 50W 6-Ohm load resistor equalizer
- Fit 9005 9006 9012 9140 9145 9150 9155 HB3 HB4 H10, etc
- Bypass existing fog/driving lights, good for adding or replacing existing halogen bulbs with LED lights and avoid any LED related bulb out warning pop up on dashboard
- Since the load resistor will generate a lot of heat, please mount the resistor equalizer to metal
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.16 pounds
See On Amazon
Looking For Something Else?
Search