10-Pack 90 Elbow Pneumatic Air Fittings - 1/4" Tube OD Push to Connect Fittings with 1/8" NPT Male Thread
Asin: B0CTPYXZR6
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Supernine | Manufacturer: Supernine
See On Amazon Similar To 10Pack 90 Elbow Pneumatic Air
#1
10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4" Tube OD x 1/4" NPT Thread
Asin: B07GLH22HV | Model: 90DKQJT081801 | PartNumber: 90DKQJT081801 | Ean: 0726587356452 | UPC: 726587356452
Easy To Install And Removed, 360-Degree Rotate Freely, Release Rings Adopt Ellipse Design, Offering Good Seal Property.
Applicable Tube: Pu/ Pa/ Pe/ Pvc.
Fluid Type: Air, Vacuum; Operating Pressure: 0- 150 Psi/ 0-9.9 Kgf/Cm2 (0-990Kpa); Working Temperature: 0-60°C | 32～140°F; Negative Pressure: -100Kpa| -29.5 In H.
Type: Quick Connect Fitting Connector; 1/4" Tube Od X 1/4" Npt.
Features
- Made of quality plastic and stainless steel for durable use
- Type: Quick Connect Fitting Connector; 1/4 Tube OD x 1/4 NPT
- Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property
- Fluid Type: air, vacuum; Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa); Working Temperature: 0-60 C | 32 140 F; Negative Pressure: -100Kpa| -29.5 In H
- Applicable Tube: PU/ PA/ PE/ PVC
- See more on Amazon...
Brand: Yarrkc | Manufacturer: Yarr Store
See On Amazon #2
Lswteiz 10Pack 3/4" Slip x Female Thread 90 Degree Elbow PVC Pipe Fittings Connector SCH40 3/4IN Socket to Female Threaded Elbow PVC Corner Adapter Pipe Fitting for Sprinkler, Irrigation
Asin: B0CPLBJWN5 | Model: Ceeda-10PCS-White-NPTelbow-231205 | PartNumber: Ceeda-10PCS-White-NPTelbow-231205 | Ean: 0721545050014 | UPC: 721545050014
【Easy Installation】They Are Lightweight And Easy To Install. Installation Requires The Use Of Primer And Solvent Cement, Thread Seal Tape Is Recommended For Threaded Joints..
【Use With Confidence】Meets Astm D2466 And D1784 Standards, Comply With Nsf Requirements..
【Wide Application】Furniture-Grade Sch40 Parts, Intended For Systems That Will Not Exceed 140° F, Suitable For Indoor And Outdoor Use; Pressure Fittings Are Used In Irrigation, Underground Sprinkler Systems, Swim Pools, Running Water Lines As Sewer Pipe Fittings At Home, Rv Or Any Commercial Plumbing Systems, Etc..
【Material】Heavy Duty 3/4 Inch Pvc Female Thread Elbow Made Of High-Quality Pvc, High-Impact Strength, Resistant To Frost And Corrosion. Flame Retardant Material, Safe And Reliable, Long Service Life..
Features
- Slip x Female Thread Elbow Slip opening on one end and female NPT threads on the other for connecting to pipes with different ends, rotate to remove for easy maintenance and cleaning later. 2 Way 90 degree elbow connector for corner connections, ideal for docking and changing the direction.
- Material Heavy Duty 3/4 Inch PVC female thread elbow made of high-quality PVC, high-impact strength, resistant to frost and corrosion. Flame retardant material, safe and reliable, long service life.
- Easy Installation They are lightweight and easy to install. Installation requires the use of primer and solvent cement, thread seal tape is recommended for threaded joints.
- Wide Application Furniture-Grade SCH40 Parts, intended for systems that will not exceed 140 F, suitable for indoor and outdoor use; Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, running water lines as sewer pipe fittings at home, RV or any commercial plumbing systems, etc.
- Use with Confidence Meets ASTM D2466 and D1784 standards, comply with NSF requirements.
- See more on Amazon...
Brand: Lswteiz | Manufacturer: CeeDa
See On Amazon #3
Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4" Tube OD x 1/4" NPT Male 90 Degree Adapter (Pack of 5)
Asin: B07R4LMK11 | Model: 1kl-08014-emt | PartNumber: 1kl-08014-emt
Working Pressure:0-1.0Mpa | 0-150Psi/Applicable Tube:Pu / Pa / Pe / Pvc.
Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Proof Pressure:3.0Mpa | 435Psi.Seal O-Ring:Nbr/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass.
Fluid Admitted:Air Vacuum Water (No Freezing).
Features
- Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/4" NPT Thread
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass
- Working Temperature:0-60 C | 32 140 F/Negative Pressure:-100Kpa | -29.5 In Hg
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
See On Amazon #4
Metaland Elbow Push to Connect Fitting, 1/4" OD Pneumatic Air Line 90 Degree Quick Push Lock Adapter (Pack of 10)
Asin: B0B3X2CY13 | Model: ml-06560-plp | PartNumber: ml-06560-plp
【 Working Pressure】0～145 Psi..
【Connetion Type】Push To Connect With Pu/Pa / Pe / Pvc Tubing..
【 Working Temperature】30～150°F.
【Size】1/4" Tube Od..
Features
- Material Body:Plastic; Lock Claw: Stainless Steel.
- Size 1/4 Tube OD.
- Working Pressure 0 145 PSI.
- Working Temperature 30 150 F
- Connetion Type Push to connect with PU/PA / PE / PVC tubing.
- See more on Amazon...
Brand: Metaland | Manufacturer: Metaland
See On Amazon #5
Push to Connect Air Fittings 1/4 inch OD Tubing x 1/8" Npt Elbow Air Line Quick Connect Fittings Male Threaded 90 Degree Push in Lock Fittings Pneumatic Tube Fittings Connectors 10Packs
Asin: B0B3WSCLYP
The 1/4 Airline Push Fittings Are Available In Various Styles And Models ,All Models Of Push In Connectors Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
The Release Ring Of Pneumatic Air Tube 1/4 Od Fittings Conforms With The Ellipse Design To Ensure That The Disconnecting Unit Is In Good Shape;Offering Good Seal Property.
Easy To Install To 1/4 Od Tubing And Removed, Even Can Change The Tube Connector Direction After Installation Easily,360-Degree Rotate Freely.
1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe Pu/ Pa/ Pe/ Pvc; Working Temperature: 0-60°C | 32～140°F;Working Pressure:0-1.0Mpa | 0-150Psi; Proof Pressure:3.0Mpa | 435Psi; Negative Pressure:-100Kpa | -29.5 In Hg.
Features
- Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90 Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
- 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60 C | 32 140 F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
- The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
- Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
- The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
- See more on Amazon...
Brand: CEKER | Manufacturer: SONNA
See On Amazon #6
SUNGATOR 90 Degree Barstock Street Elbow with Sealant, 1/4" NPT Male Pipe x 1/4" NPT Female Pipe, Brass Pipe Pneumatic Fitting (2-Pack)
Asin: B09991CMMJ
【Firm And Durable】: Brass Construction For Corrosion Resistance, High Temperature Ductility. It Is Not Easy To Be Broken, More Robust And Durable Than Castings. Solid Brass Can Withstand Up To 100 °C (212 °F)..
【Superior Threads】: Meet Specifications Astm B584 And Asme/Ansi B16 For Quality Assurance. Precisely Milled, Threads Are Tighter, Deeper, Smoother Than Regular Products, Making Work Easier And More Efficient..
【Function】: Elbow Is Installed Between Two Pipes Or Tubing To Allow A Change Of Direction. It Can Be Used With Instrumentation And Hydraulic Systems In Low And Medium Pressure, Such As Grease, Fuels, Lp And Natural Gas, Refrigeration, As Well As Air Tools, Etc..
【Premium Material】: Premium Solid Brass With Thicker Wall, More Durable Than Iron And Iron Galvanized Pipe Fittings, 1/4" Npt Male Pipe X 1/4"Npt Female Pipe, 2 Pack..
Features
- Improved Threaded End : Coated the male end with select sealant to a snug fit for creating an airtight environment. You can relieve from sealing tapes.
- Premium Material : Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4 NPT male pipe x 1/4NPT female pipe, 2 pack.
- Firm and Durable : Brass construction for corrosion resistance, high temperature ductility. It is not easy to be broken, more robust and durable than castings. Solid brass can withstand up to 100 C (212 F).
- Function : Elbow is installed between two pipes or tubing to allow a change of direction. It can be used with instrumentation and hydraulic systems in low and medium pressure, such as grease, fuels, LP and natural gas, refrigeration, as well as air tools, etc.
- Superior Threads : Meet specifications ASTM B584 and ASME/ANSI B16 for quality assurance. Precisely milled, threads are tighter, deeper, smoother than regular products, making work easier and more efficient.
- See more on Amazon...
Brand: SUNGATOR | Manufacturer: SUNGATOR
See On Amazon #7
Beduan Push to Connect Fitting Elbow, 1/4" Tube OD x 1/4 Tube OD Pneumatic 90 Degree Elbow Adapter Push Lock Fitting (Pack of 10
Asin: B07Q18ZSZ4 | Model: 1kl-07700-KCELBOW | PartNumber: 1kl-07700-KCELBOW | Ean: 0745302100071 | UPC: 745302100071
Working Pressure:0-1.0Mpa | 0-150Psi/Applicable Tube:Pu / Pa / Pe / Pvc.
Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Proof Pressure:3.0Mpa | 435Psi.Seal O-Ring:Nbr/ Lock Claw:Plastic/Body:Plastic(Pet).
Fluid Admitted:Air Vacuum Water (No Freezing).
Features
- Type:Push in fitting/Push to connect /Size:1/4 " Elbow Connector
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
- Working Temperature:0-60 C | 32 140 F/Negative Pressure:-100Kpa | -29.5 In Hg
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
See On Amazon #8
Utah Pneumatic Air Elbow 3/8" Od Air Line Union Push To Connect Air Fittings Push Elbow Push Air Fitting Airline Fittings (10 Pack)
Asin: B072PV1RQT | Model: elp38 | PartNumber: elp38 | Ean: 0652827872270 | UPC: 652827872270
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Tube Connector.
Features
- Air Connector : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60 C | 32 140 F Applicable Tube: Pu/Nylon/Soft Pe Elbow Union Push Connect
- Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60 C | 32 140 F Applicable Tube: Pu/Nylon/Soft Pe Airline Tube Connector
- Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly
- You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape
- All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned
- See more on Amazon...
Brand: utah pneumatic | Manufacturer: Utah Pneumatic
Dimensions: 0.50 x 1.00 x 0.50 Inches | Weight: 0.01 Pounds
See On Amazon #9
Jienk 10PCS Pneumatic Union Elbow Push to Connect Fittings, PBT Plastic 90 Degree 1/4" x 1/4" Tube OD Quick Connector for Air Compressor Air Brake Shop Air
Asin: B08H4RFW4F | Model: PV-1/4 | PartNumber: PV-1/4 | Ean: 7864951705178
【Push Lock】Quick Connect Fittings Easy To Install And Remove. No Extra Sealing Required, Just One Touch To Connect The Tube. The Release Ring Adopt Ellipse Design, Removed Conveniently. 360°Rotation, After Installation, The Tube Direction Can Be Changed Easily..
【Use Tube】Pu / Pa / Pe.
【Wildly Application】Working Temperature Range: 32～140°F. Most Commonly Used In The Field For Low-Pressure Hydraulic And Pneumatic Systems Such As General Industrial, Maintenance And Automotive Assembly,As Well As Moving Parts Such As Air Ride, Air Horns And Air Suspension System..
【Good Sealing Performance】Stainless Steel Tube Gripping Claw Makes The Grip Force Stronger, Not Easy To Trip Or Leak. Nbr Seal Ring And Clamp Ring Offer Extra Protection From Leakage..
Features
- Durable This fitting has a strong PBT housing with POM release button, the ferrule adopts zinc alloy materiel. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life.
- Good Sealing Performance Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak. NBR seal ring and clamp ring offer extra protection from leakage.
- Push Lock Quick connect fittings easy to install and remove. No extra sealing required, just one touch to connect the tube. The release ring adopt ellipse design, removed conveniently. 360 rotation, after installation, the tube direction can be changed easily.
- Wildly Application Working temperature range: 32 140 F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as general industrial, maintenance and automotive assembly,as well as moving parts such as air ride, air horns and air suspension system.
- Use Tube PU / PA / PE
- See more on Amazon...
Brand: Jienk | Manufacturer: Jienk
See On Amazon #10
Bwintech 40 Pcs 90 Degree Elbow Push in Connect Pneumatic Fitting Kit,2 Way Plastic Quick Release PV Air Line Adapter,(6mm,8mm,10mm,12mm)
Asin: B0CFXM67WZ | Model: BW07-051 | PartNumber: BW07-051
【Working Environment】: 0-8 Bars. Working Temperature: 0-60°C. Applicable Tube: Pu/Nylon/Pe..
【Easy To Intall】 No Extra Sealing Is Required, Just A Simple Push To Connect To The Tube And They Are Tightly Connected. Elliptical Release Rings At Both Ends Are More Convenient To Disassemble Without Extra Tools. In Addition, Those Fittings Are Flexible And Space-Saving, 360-Degree Rotate Freely..
【Quality Goods】This Fittings Are Made Of High Quality Brass Plastic, Durable And No Air Leakage For Long Term Use. Built-In Stainless Steel Locking Claw And Nbr O-Ring, You'd Never Worry About That Tube Falls Off. High Pressure Resistance, Can Withstand Strong Pressure Without Tripping, So No Tripping Needed..
【Dual Application】:The Pneumatic Connector Is Used To Connect Polyethylene, Nylon And Pu Tubes, Air Pipes And Pneumatic Tools, Widely Used In Industries Automatic Equipment Like Machinery, Electronics, Automobile, Packaging..
Features
- Package 40 Pcs 90 Degree Elbow Push in Connect Pneumatic Fitting, Air line Adapter Elbow Connector,Including 6mm 8mm 10mm 12mm.
- Dual Application :The pneumatic connector is used to connect polyethylene, nylon and PU tubes, air pipes and pneumatic tools, widely used in industries automatic equipment like machinery, electronics, automobile, packaging.
- Working Environment : 0-8 bars. Working Temperature: 0-60 C. Applicable Tube: PU/Nylon/PE.
- Quality Goods This fittings are made of high quality brass plastic, durable and no air leakage for long term use. Built-in stainless steel locking claw and NBR O-ring, you'd never worry about that tube falls off. High pressure resistance, can withstand strong pressure without tripping, so no tripping needed.
- Easy to Intall No extra sealing is required, just a simple push to connect to the tube and they are tightly connected. Elliptical release rings at both ends are more convenient to disassemble without extra tools. In addition, those fittings are flexible and space-saving, 360-degree rotate freely.
- See more on Amazon...
Brand: Bwintech | Manufacturer: Bwintech
See On Amazon #11
TAILONZ PNEUMATIC Blue Elbow 2 Ways - 10MM Tube OD 90 Push to Connect Tube Quick Fittings Push Lock PV-10 (Pack of 10)
Asin: B086MR8KBJ | Model: PV-10 10PCS | PartNumber: PV-10 10PCS | Ean: 4795632257439
【Size】10Mm Od.
【Features】The Connector Is Easy To Install And Widely Applicable.
【Maximum Range】145 Psi【 Working Temperature】32～140°F.
【Materia】Plastic.
Features
- Product Name Pneumatic Elbow Push to Connect Fittings
- Materia Plastic
- Size 10mm OD
- Maximum Range 145 Psi Working Temperature 32 140 F
- Features The Connector is Easy to Install and Widely Applicable
- See more on Amazon...
Brand: TAILONZ PNEUMATIC | Manufacturer: TAILONZ PNEUMATIC
See On Amazon #12
1/8" NPT(M) to 1/4" Airline 90 Degree Swivel Elbow Push-To-Connect Fitting DOT Approved (10 pcs)
Asin: B075QFDXD7 | Ean: 0818114005367 | UPC: 818114005367
Note: Airline Must Have A Straight Cut At Connection Point. Use Of A Hose Cutter Is Recommended..
Caution: As With Any Air Line Connections, Sharp Bends At The Fitting Connection May Result In Air Leakage..
10 Pieces.
Features
- DOT Approved 1/8" NPT 90 Swivel Elbow Push-to-Connect Fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 200 PSI.
- 10 pieces
- NOTE: Airline must have a straight cut at connection point. Use of a hose cutter is recommended.
- CAUTION: As with any air line connections, sharp bends at the fitting connection may result in air leakage.
- See more on Amazon...
Brand: VIAIR | Manufacturer: VIAIR
Dimensions: 1.00 x 7.00 x 5.75 inches | Weight: 0.00 Pounds
See On Amazon #13
5 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4" Tube OD x 3/8" NPT Thread
Asin: B07SPHP5B9 | Model: PKPUL14385P | PartNumber: PKPUL14385P
Brand: PAKA TOOLS | Manufacturer: PAKA HAND TOOLS
See On Amazon #14
mxuteuk 5pcs Push to Connect Fittings Pneumatic Male Elbow Connector Air line Fittings 90 Degree Push in Lock Fittings 3/8 Inch Tube OD x 1/4 Inch NPT Thread
Asin: B08MF51394 | Model: PL-3/8-1/4-5 | PartNumber: PL-3/8-1/4-5
【Working Temperature】0-60°C | 32～140°F. Applicable Tube:Pu / Pa / Pe / Pvc.
【Package Content】5Pcs X Male Elbow Push To Connect Fittings.
【Material】Made Of Quality Plastic And Stainless Steel For Durable Use; Easy To Install And Removed, Offering Good Seal Property.
【Fluid Type】Air, Vacuum; Working Pressure:0-1.0Mpa | 0-165Psi..
Features
- Type Male Elbow, Size: 3/8" Tube OD x 1/4" NPT Thread
- Fluid Type air, vacuum; Working Pressure:0-1.0mpa | 0-165psi.
- Working Temperature 0-60 C | 32 140 F. Applicable Tube:PU / PA / PE / PVC
- Material Made of quality plastic and stainless steel for durable use; Easy to install and removed, offering good seal property
- Package Content 5pcs x Male Elbow Push to Connect Fittings
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #15
Beduan Push to Connect Fitting Elbow, 10mm x 10mm Tube OD Pneumatic 90 Degree Adapter Push in Fitting for Air Compressor Pack of 10
Asin: B07M5CRXV5 | Model: kl00450 | PartNumber: kl00450 | Ean: 0753936307209 | UPC: 753936307209
Pressure Range: 0-145Pai (0-1Mpa). Max Pressure: 217Psi (1.5Mpa). Temperature Range: 0-60°C | 32～140°F..
Are Easy To Install, Just Need One Step To Finish Installation. Round O-Rings: It Offers A 360° Rotation, Even After The Installation Of Tubing, 360° Rotation Could Operate Though..
Fluid Admitted: Air Vacuum Water (No Freezing)..
Body Material: Plastic (Pet). Applicable Tube: Pu/Nylon/Pe/Pa /Pe/Pvc Soft Hose Fitting..
Features
- Type: Push in fittings. Tube size: 10mm tube OD x 10mm Tube OD
- Body Material: Plastic (PET). Applicable Tube: PU/NYLON/PE/PA /PE/PVC soft hose fitting.
- Pressure Range: 0-145Pai (0-1Mpa). Max Pressure: 217Psi (1.5Mpa). Temperature Range: 0-60 C | 32 140 F.
- Fluid Admitted: Air Vacuum Water (no freezing).
- Are easy to install, Just need one step to finish installation. Round O-Rings: It offers a 360 rotation, even after the installation of tubing, 360 rotation could operate though.
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
See On Amazon #16
Jienk 10PCS Pneumatic Male Elbow 8mm Tube OD x 1/4" NPT Thread Push to Connect Air Fittings,90 Degree Quick Connector for Air Compressor Air Horn Air Bag
Asin: B0CPY21SSL | Model: JT628 | PartNumber: JT628 | Ean: 0759357403827 | UPC: 759357403827
【Push Lock】 Quick Connect Fittings Easy To Install And Remove, Just A Simple Push To Connect The Tube. The Release Ring Adopts Ellipse Design, Removed Conveniently. 360°Rotation, After Installation, The Tube Direction Can Be Changed Easily..
【Operating Pressure】 0~145 Psi 【Working Temperature】 32～140°F.
【Use Tube】Pu / Pa / Pe.
【Good Sealing Performance】Stainless Steel Tube Gripping Claw Makes The Grip Force Stronger, Not Easy To Trip Or Leak. External Tightening With A Flat Wrench Or Socket Wrench..
Features
- Durable This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. The thread port adopts nickel plated brass material. High pressure resistance, corrosion resistance and a long service life.
- Good Sealing Performance Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak. External tightening with a flat wrench or socket wrench.
- Push Lock Quick connect fittings easy to install and remove, just a simple push to connect the tube. The release ring adopts ellipse design, removed conveniently. 360 rotation, after installation, the tube direction can be changed easily.
- Use Tube PU / PA / PE
- Operating Pressure 0~145 Psi Working Temperature 32 140 F
- See more on Amazon...
Brand: Jienk | Manufacturer: Jienk
Dimensions: 0.70 x 3.00 x 3.00 inches
See On Amazon #17
Bwintech 10 Pcs 8mm 90 Degree Elbow Push in Connect Pneumatic Fitting,2 Way Plastic Quick Release PV Air Line Adapter
Asin: B0CFX29RPJ | Model: BW07-023 | PartNumber: BW07-023
【Working Environment】: 0-8 Bars. Working Temperature: 0-60°C. Applicable Tube: Pu/Nylon/Pe..
【Easy To Intall】 No Extra Sealing Is Required, Just A Simple Push To Connect To The Tube And They Are Tightly Connected. Elliptical Release Rings At Both Ends Are More Convenient To Disassemble Without Extra Tools. In Addition, Those Fittings Are Flexible And Space-Saving, 360-Degree Rotate Freely..
【Quality Goods】This Fittings Are Made Of High Quality Plastic, Durable And No Air Leakage For Long Term Use. Built-In Stainless Steel Locking Claw And Nbr O-Ring, You'd Never Worry About That Tube Falls Off. High Pressure Resistance, Can Withstand Strong Pressure Without Tripping, So No Tripping Needed..
【Dual Application】:The Pneumatic Connector Is Used To Connect Polyethylene, Nylon And Pu Tubes, Air Pipes And Pneumatic Tools, Widely Used In Industries Automatic Equipment Like Machinery, Electronics, Automobile, Packaging..
Features
- Package 10 Pcs Push in Connect Pneumatic Fitting, Air line Adapter Elbow Connector.
- Dual Application :The pneumatic connector is used to connect polyethylene, nylon and PU tubes, air pipes and pneumatic tools, widely used in industries automatic equipment like machinery, electronics, automobile, packaging.
- Working Environment : 0-8 bars. Working Temperature: 0-60 C. Applicable Tube: PU/Nylon/PE.
- Quality Goods This fittings are made of high quality plastic, durable and no air leakage for long term use. Built-in stainless steel locking claw and NBR O-ring, you'd never worry about that tube falls off. High pressure resistance, can withstand strong pressure without tripping, so no tripping needed.
- Easy to Intall No extra sealing is required, just a simple push to connect to the tube and they are tightly connected. Elliptical release rings at both ends are more convenient to disassemble without extra tools. In addition, those fittings are flexible and space-saving, 360-degree rotate freely.
- See more on Amazon...
Brand: Bwintech | Manufacturer: Bwintech
See On Amazon #18
VIGOR 2Pcs Pneumatic Elbow 90 Degree Elbow Adapter Copper Nickle Plated Air Union Fitting for Air Suspension Compressor Air Spring Horn (1/4"Tube OD-1/8"NPT)
Asin: B0C37G13G9 | Model: WT001 | PartNumber: WT001
✅Brass Tube Gripping Claw Makes The Grip Force Stronger, Not Easy To Trip Or Leak. External Tightening With A Flat Wrench Or Socket Wrench..
✅Satisfaction Guaranteed - 2 Year Warranty, Whatever Problems You Meet With Our Pneumatic Brass Male Elbow, Please Contact Us For The Solution..
✅Type: Push In Fitting/Push To Connect; Size: 1/4"Tube Od-1/8"Npt Thread; Working Pressure: 0-1.0Mpa | 0-150Psi/Applicable Tube: Pu / Pa / Pe / Pvc; Working Temperature:0-60°C | 32～140°F/Negative Pressure: -100Kpa | -29.5 In Hg..
✅Quick Connect Fittings Easy To Install And Remove, Just A Simple Push To Connect The Tube. The Release Ring Adopts Ellipse Design, Removed Conveniently. 360°Rotation, After Installation, The Tube Direction Can Be Changed Easily..
Features
- Our fitting has brass body and zinc alloy ferrule. Suitable for high temperature and humid environment, corrosion resistance and a long service life.
- Quick connect fittings easy to install and remove, just a simple push to connect the tube. The release ring adopts ellipse design, removed conveniently. 360 rotation, after installation, the tube direction can be changed easily.
- Brass tube gripping claw makes the grip force stronger, not easy to trip or leak. External tightening with a flat wrench or socket wrench.
- Type: Push in fitting/Push to connect; Size: 1/4Tube OD-1/8NPT Thread; Working Pressure: 0-1.0MPa | 0-150psi/Applicable Tube: PU / PA / PE / PVC; Working Temperature:0-60 C | 32 140 F/Negative Pressure: -100Kpa | -29.5 In Hg.
- SATISFACTION GUARANTEED - 2 Year warranty, whatever problems you meet with our Pneumatic Brass Male Elbow, please contact us for the solution.
- See more on Amazon...
Brand: VIGOR | Manufacturer: VIGOR
See On Amazon #19
Utah Pneumatic 1/4" Od 1/4" Npt Air Elbow Push-to-connect Fittings Air Connectors Fittings Push Elbow Nickel-plated Brass Air Fitting Elbow 90 Degree Air Fitting (10 Pack)
Asin: B072KZLDKQ | Model: elbp1111 | PartNumber: elbp1111 | Ean: 0652827872607 | UPC: 652827872607
Push To Connect Fittings: Easy Installation And Quick Connects Make Them A Preferred Option For Various Pneumatic Fittings..
Quick Connect Fittings: Ideal For Possible Air Tube, Airline, And Pneumatic Hose Connections Due To Hose Clamping Feature Which Ensures Maximum Stability And Durability..
Quick Connect Fittings: Ideal For Possible Air Tube, Airline, And Pneumatic Hose Connections Due To Hose Clamping Feature Which Ensures Maximum Stability And Durability..
Airline Fittings: Ensure Secure And Leak Free Connections Through Patented . Great For A Variety Of Applications, Such As Push Fit Fittings, And Push To Connect Air Fittings..
Features
- Working Pressure: Suitable For Many Types Of Quick Connect Tube Fittings Up To 150psi. Working Temperature: 0-60 C | 32 140 F. Applicable Tube:PU / PA / PE / PVC tube connectors fitting ptc air fittings
- Airline Fittings: Ensure Secure And Leak Free Connections Through Patented . Great For A Variety Of Applications, Such As Push Fit Fittings, And Push To Connect Air Fittings.
- Push To Connect Fittings: Easy Installation And Quick Connects Make Them A Preferred Option For Various Pneumatic Fittings.
- Quick Connect Fittings: Ideal For Possible Air Tube, Airline, And Pneumatic Hose Connections Due To Hose Clamping Feature Which Ensures Maximum Stability And Durability.
- Quick Connect Fittings: Ideal For Possible Air Tube, Airline, And Pneumatic Hose Connections Due To Hose Clamping Feature Which Ensures Maximum Stability And Durability.
- See more on Amazon...
Brand: utah pneumatic | Manufacturer: utah pneumatic
Dimensions: 5.00 x 5.00 x 0.10 Inches | Weight: 0.13 Pounds
See On Amazon #20
VETLEY Pneumatic Push to Connect Fittings 90 Degree Elbow Male 10MM Tube OD x 3/8 NPT Thread Quick Connect Air Fitting PL10-N3(Pack of 10)
Asin: B0BD7L6LTX | Model: PL10-N3,10 | PartNumber: PL10-N3,10 | Ean: 0768694654946 | UPC: 768694654946
3.Material:Plastic, Copper;Fluid Type:Air,Vacuum.
5.Application Of Trachea:Pu/Pe/Pa/Pvc/Nylon/Ptfe.
4.Working Temperature:32~160 °F / 0~70°C;Working Pressure:0～150 Psi.
2.Product Size:10Mm Tube Od X 3/8 Npt Thread.
Features
- 1.Product Name:Male Elbow Push to connect fittings/ L Type Male Thread Pneumatic Connector
- 2.Product Size:10mm Tube OD x 3/8 NPT Thread
- 3.Material:Plastic, Copper;Fluid Type:air,vacuum
- 4.Working Temperature:32~160 F / 0~70 C;Working Pressure:0 150 Psi
- 5.Application of Trachea:PU/PE/PA/PVC/Nylon/PTFE
- See more on Amazon...
Brand: VETLEY | Manufacturer: VETLEY
See On Amazon
Looking For Something Else?
Search