BLIKA 10 Pairs 4"x4" Invisible Cable Railing Kit, 1/8" Invisible Receiver and Swage Stud End for 2"x2", 4"x4" Wood/Metal Posts, 1/8" Cable Railing Hardware, Invisible Cable Railing Hardware
Asin: B0CTQFSL63
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Size】4"X4" Invisible Cable Railing Kits Fit For 1/8 Inch Stainless Steel Wire Rope Cable. This Cable Railing Hardware Consists Of Two Parts: Invisible Receiver And Swage Dead End. Overall Length Of The Receiver: 1.75", Threaded Stud Length: 2.98", Thread: 1/4-20. Min Length: 3.73", Max Length: 4.59", Drill Hole Size = 0.30". The Length Of The Swage Dead End: 1.73", Drill Hole Size = 0.21"..
【Package List】10 Pairs 1/8" Invisible Cable Railing Kit For 4"X4" Cable Railing Posts. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement. Blika Offers Only The Highest Quality And Most Affordable Assemblies For Your Deck And Balustrade Railing Project..
【Easy To Install】Invisible Receiver With Hexagon Socket. Invisable After Being Installed Due To Its Small Size And Consice Appearance. These Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9. 1/8" Stainless Steel Protector Sleeves: B091c66zrv. For Stair Cable Railing, Compatible With 5/16" Id Angle Washers: B0bxd6ydln..
【T316 Stainless Stell】This Cable Railing Hardware Was Made With T316 Stainless Steel So You Don’T Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Use With Metal Or Wood Posts. Suitable For Outdoor Or Indoor..
Features
- APPLICATIONS For 1/8 inch deck cable railing system. It's suitable for 4"x4" metal and wood posts and applicable for both level and angled sections. Provided a "dead end" for a DIY cable railing project, can be used on all sorts of posts in wood or metal. Perfect for installation on exterior decks, marine rigging, or interior applications.
- T316 STAINLESS STELL This cable railing hardware was made with T316 stainless steel so you don t have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Use with metal or wood posts. Suitable for outdoor or indoor.
- SIZE 4x4 Invisible cable railing kits fit for 1/8 inch stainless steel wire rope cable. This cable railing hardware consists of two parts: Invisible receiver and swage dead end. Overall length of the receiver: 1.75, Threaded stud length: 2.98, Thread: 1/4-20. Min length: 3.73, Max length: 4.59, Drill Hole Size = 0.30. The length of the swage dead end: 1.73, Drill Hole Size = 0.21.
- EASY TO INSTALL Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. 1/8 Stainless steel protector sleeves: B091C66ZRV. for stair cable railing, compatible with 5/16 ID Angle Washers: B0BXD6YDLN.
- PACKAGE LIST 10 Pairs 1/8 Invisible Cable Railing Kit for 4x4 cable railing posts. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. BLIKA offers only the highest quality and most affordable assemblies for your deck and balustrade railing project.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BL067-L-10P
See On Amazon Similar To BLIKA 10 Pairs 4x4 Invisible
#1
CKE 80 Pack T316 Stainless Steel Protector Sleeves for 1/8" Wire Rope Cable Railing, Marine Grade Protective Sleeves Deck Cable Railing Kit for Wood Posts DIY Balustrade, CR01
Asin: B07TXTSDGT | Model: CKE012 | PartNumber: CKE012 | Ean: 0840637171922 | UPC: 840637171922
🔦【Compatibility & Size】 These Stainless Steel Protective Sleeves Suitable For 1/8" Cable Railing, Perfect For Diy Your Own Cable Railing Kit Project, Good For Indoor Or Outdoor Deak Cable Railing System Applications. Overall Length Of Sleeve: 0.8", Flange Diameter: 0.48", Required Hole Diameter: 0.25"..
🔦【Package List & Two Years - 100% Satisfaction Guarantee】80 Pack Stainless Steel Protector Sleeves, Come With A Free Drill Bit. Buy With Confidence: If You're Not Satisfied With This Item At Anytime Within Two Years Of Purchase, We'll Provide A Refund Or Replacement..
🔦【Construct Cable Railing System Suggestion】Cke Building A Cost-Effective Stainless Steel Cable Railing System Suggestion: Hydraulic Crimper: Cke Hc01. 1/8" Swage Lag Screw: Cke Cr35. Swage Threaded Stud: Cke Cr06. Angle Cable Railing Swage Toggle Turnbuckle: Cke Cr025. Level Protector Sleeve: Cke Cr01. Angle Protector Sleeve: Cke Cr30. Drill Guide: Cke Dg02. 1/8" Cable Railing Wire Rope: Cke Cw600. For More Stainless Steel Cable Wire Rope Kit Suggestion, See Pics 7 And 8..
🔦【T316 Marin Grade Stainless Steel】 Made From T316 Marine Grade Stainless Steel, Cke 80 Pcs Stainless Steel Protective Sleeves Is Built To Withstand The Harshest Outdoor Conditions, A Combination Of Strength, Corrosion Resistance, And Aesthetic Appeal, Ensuring Long-Lasting Protection For Your Cable Railing System. 【Cke Cable Railing Promised】All Of Cke T316 Cable Railing Will Not Rust In Normal Using Situation Even After Installed 10 Years, If Not, We Will Offer Warranty With Full Refund..
Features
- Clean Finished Look These cable protector sleeves fits 1/8" cable railing wire rope for wood/composite posts, provide a sleek and stylish look to your cable railing project. Featuring a minimalist design, they add a touch of elegance and sophistication to any deck or staircase, elevating the overall aesthetic of your space. These stainless steel protective sleeves can prevent cable from wearing into post, and keep to maintain cable rail tension for preventing wire rope vibration.
- T316 Marin Grade Stainless Steel Made from T316 marine grade stainless steel, CKE 80 pcs stainless steel protective sleeves is built to withstand the harshest outdoor conditions, a combination of strength, corrosion resistance, and aesthetic appeal, ensuring long-lasting protection for your cable railing system. CKE Cable Railing Promised All of CKE T316 Cable Railing will not rust in normal using situation even after installed 10 years, if not, we will offer warranty with full refund.
- Compatibility & Size These stainless steel protective sleeves suitable for 1/8 Cable Railing, perfect for DIY your own cable railing kit project, good for indoor or outdoor deak cable railing system applications. Overall Length of Sleeve: 0.8, Flange Diameter: 0.48, Required Hole Diameter: 0.25.
- Construct Cable Railing System Suggestion CKE Building a cost-effective stainless steel cable railing system suggestion: Hydraulic Crimper: CKE HC01. 1/8 Swage Lag Screw: CKE CR35. Swage Threaded Stud: CKE CR06. Angle Cable Railing Swage Toggle Turnbuckle: CKE CR025. Level Protector Sleeve: CKE CR01. Angle Protector Sleeve: CKE CR30. Drill Guide: CKE DG02. 1/8 Cable Railing Wire Rope: CKE CW600. For more stainless steel cable wire rope kit suggestion, see pics 7 and 8.
- Package List & Two Years - 100% Satisfaction Guarantee 80 Pack Stainless Steel protector Sleeves, come with a free drill bit. Buy with confidence: If you're not satisfied with this item at anytime within two years of purchase, we'll provide a refund or replacement.
- See more on Amazon...
Brand: CKE | Manufacturer: CKE
Weight: 0.75 pounds
See On Amazon #2
BLIKA 10 Pairs 1/8" Invisible Cable Railing kit, 1/8" Invisible Receiver and Swage Stud End for 2"x2", 3"x3", 4"x4" Wood/Metal Posts, Swage Tensioner 1/8", Cable Railing Hardware
Asin: B0BWXB1TKZ
【Size】Use With 1/8″ Stainless Steel Wire Rope Cable. This Cable Railing Hardware Consists Of Two Parts: Invisible Receiver And Swage Dead End. Overall Length Of The Receiver: 2.23", Threaded Stud Length: 2.95", Min Length: 3.15", Max Length: 3.93". Drill Hole Size = 0.37". The Length Of The Swage Dead End: 2.25". Drill Hole Size = 0.21"..
【Package List】10 Pair 1/8" Invisible Cable Railing Kit. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement. Blika Offers Only The Highest Quality And Most Affordable Assemblies For Your Deck And Balustrade Railing Project..
【Easy To Install】Invisible Receiver With Hexagon Socket. Invisable After Being Installed Due To Its Small Size And Consice Appearance. These Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9. Stainless Steel Protector Sleeves: B091c66zrv. 400Ft Stainless Steel Cable: B083x5x3sl..
【T316 Stainless Stell】This Cable Railing Hardware Was Made With T316 Stainless Steel So You Don’T Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Fit For 2"X2" And 4"X4" Metal Or Wood Posts. Suitable For Outdoor Or Indoor..
Features
- APPLICATIONS : Great for vertical cable runs. Their main purpose is to anchor cable on one end of runs you ll then need some type of tensioner on the opposite end. We have a great 10.5 Tensioner if you re putting up a long run and want to make sure there is enough tensioning. Shorter to medium sized railings could be done with hardware like our Threaded Terminal option: B07NVFXMQS, B07V1SH383.
- T316 STAINLESS STELL This cable railing hardware was made with T316 stainless steel so you don t have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Fit for 2x2 and 4x4 metal or wood posts. Suitable for outdoor or indoor.
- SIZE Use with 1/8 stainless steel wire rope cable. This cable railing hardware consists of two parts: Invisible receiver and swage dead end. Overall length of the receiver: 2.23, Threaded stud length: 2.95, Min length: 3.15, Max length: 3.93. Drill Hole Size = 0.37. The length of the swage dead end: 2.25. Drill Hole Size = 0.21.
- EASY TO INSTALL Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. Stainless Steel Protector sleeves: B091C66ZRV. 400FT Stainless Steel Cable: B083X5X3SL.
- PACKAGE LIST 10 Pair 1/8 Invisible Cable Railing kit. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. BLIKA offers only the highest quality and most affordable assemblies for your deck and balustrade railing project.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon #3
Crystmetal Silver Cable Railing Hardware, 10 Pairs(20pack) 1/8" Upgraded Completely Invisible T316 Stainless Steel Turnbuckle Tensioner and Fixed Terminal for Metal & Wood Post (Silver)
Asin: B0C5F48X4F | Ean: 9331739394216
【Invisible & Widely Use】The Invisible Flattened Tail Design Could Hide Swaged End Entirely In 4"X4" Post(Not Totally Hidden In 2"X2" Post). Apply To Get A Neat Look For Both Wood Posts And Wood Posts..
【Easy To Install】The Cable Railing Can Be Connected To The Cable By A Hydraulic Crimper Tool(Not Included In This Kit) And Installed With An Allen Wrench. Our Installation Pictures Will Help And It Is Beginner Friendly..
【High-Quality And Long-Lasting】This Cable Railing Kit Is Made Of T316 Stainless Steel Using Top Coating Technology, Enhancing Durability And Corrosion Resistance. It Can Be Used Indoors And Outdoors, Marine Grade..
【Size】The Steel Cable Railing Apply To 1/8" Wire Rope. The Length Of Tensioner Can Be Adjusted From 2 11/16”Inches To 3 3/4” Inches..
Features
- Package The cable railing system provides10 pairs silver T316 stainless steel cable railing which can assemble 10 cable runs. This item Includes 10 pcs tensioner, 10 pcs fixed end, 1pc Allen Wrench with competitive list price.
- Size The steel cable railing apply to 1/8 wire rope. The length of tensioner can be adjusted from 2 11/16 inches to 3 3/4 inches.
- Invisible & widely use The invisible flattened tail design could hide swaged end entirely in 4x4 post(not totally hidden in 2x2 post). Apply to get a neat look for both wood posts and wood posts.
- High-quality and long-lasting This cable railing kit is made of T316 stainless steel using top coating technology, enhancing durability and corrosion resistance. It can be used indoors and outdoors, marine grade.
- Easy to install The cable railing can be connected to the cable by a hydraulic crimper tool(not included in this kit) and installed with an Allen Wrench. Our installation pictures will help and it is beginner friendly.
- See more on Amazon...
Brand: Crystmetal | Manufacturer: Crystmetal
See On Amazon #4
BLIKA 20 Pairs 4"x4" Invisible Cable Railing Kits and 10 Ton Hydraulic Crimping Tool and Cable Cutter
Asin: B0CGCK8ZXB
【Size】4"X4" Invisible Cable Railing Kits Fit For 1/8 Inch Stainless Steel Wire Rope Cable. This Cable Railing Hardware Consists Of Two Parts: Invisible Receiver And Swage Dead End. Overall Length Of The Receiver: 1.75", Threaded Stud Length: 2.98", Thread: 1/4-20. Min Length: 3.73", Max Length: 4.59", Drill Hole Size = 0.30". The Length Of The Swage Dead End: 1.73", Drill Hole Size = 0.21"..
【Package List】20 Pairs 1/8" Invisible Cable Railing Kit + 10 Ton Hydraulic Crimping Tool And Cable Cutter..
【Easy To Install】Invisible Receiver With Hexagon Socket. Invisable After Being Installed Due To Its Small Size And Consice Appearance. These Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9. 1/8" Stainless Steel Protector Sleeves: B091c66zrv. For Stair Cable Railing, Compatible With 5/16" Id Angle Washers: B0bxd6ydln..
【T316 Stainless Stell】This Cable Railing Hardware Was Made With T316 Stainless Steel So You Don’T Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Use With Metal Or Wood Posts. Suitable For Outdoor Or Indoor..
Features
- APPLICATIONS For 1/8 inch deck cable railing system. It's suitable for 4"x4" metal and wood posts and applicable for both level and angled sections. Provided a "dead end" for a DIY cable railing project, can be used on all sorts of posts in wood or metal. Perfect for installation on exterior decks, marine rigging, or interior applications.
- T316 STAINLESS STELL This cable railing hardware was made with T316 stainless steel so you don t have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Use with metal or wood posts. Suitable for outdoor or indoor.
- SIZE 4x4 Invisible cable railing kits fit for 1/8 inch stainless steel wire rope cable. This cable railing hardware consists of two parts: Invisible receiver and swage dead end. Overall length of the receiver: 1.75, Threaded stud length: 2.98, Thread: 1/4-20. Min length: 3.73, Max length: 4.59, Drill Hole Size = 0.30. The length of the swage dead end: 1.73, Drill Hole Size = 0.21.
- EASY TO INSTALL Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. 1/8 Stainless steel protector sleeves: B091C66ZRV. for stair cable railing, compatible with 5/16 ID Angle Washers: B0BXD6YDLN.
- PACKAGE LIST 20 Pairs 1/8 Invisible Cable Railing Kit + 10 Ton Hydraulic Crimping Tool and Cable Cutter.
- See more on Amazon...
Brand: BLIKA
See On Amazon
Looking For Something Else?
Search