G10 Knife Scales-Earth Brown- 1/8" Thick Knife Handle Material, Sheets, G10 Sheet, G10 Panel, Made in the USA (Scales)
Asin: B0CTR4Z1K1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Difference Between Micarta And G10 Is: Micarta Is A High Pressure Laminate That (Often) Uses Linen Or Canvas Based Fiber. G10 Is An Epoxy Based High Pressure Laminate That Used Glass Mat (Think Fiber Glass) For The Fiber Base. G10 Is Tougher And More Water Resistant Than Micart.
Made In The Usa.
Tip: I Tried White Buff, Green Buff, Pink No Scratch And Then Finally Black Buff Compound. The Black Worked The Best And Left A Nice, Dark Satin Finish. The White Was Next Best Leaving A Gloss Shine But Left The Fiber With A Slightly Dirty Look. The Pink No Scratch Just Looked Bad And The Green Chrome Left A Green Tinge. Tip: This Is Glass Based. Wear A Respirator. Wear Gloves When You Are Cutting It Too. After Cutting A Bunch Of It, I Can Feel Several Dozen Little Prickly Glass Threads In My Hands..
Features
- Scales are 1/8"x1.5"x6" (sold as a pair), Sheet is 1/8"x6"x12" (sold as a single piece), you choose size
- Tip: I tried white buff, green buff, pink no scratch and then finally black buff compound. The black worked the best and left a nice, dark satin finish. The white was next best leaving a gloss shine but left the fiber with a slightly dirty look. The Pink no scratch just looked bad and the green chrome left a green tinge. Tip: This is glass based. Wear a respirator. Wear gloves when you are cutting it too. After cutting a bunch of it, I can feel several dozen little prickly glass threads in my hands.
- The difference between Micarta and G10 is: Micarta is a high pressure laminate that (often) uses linen or canvas based fiber. G10 is an epoxy based high pressure laminate that used glass mat (think fiber glass) for the fiber base. G10 is tougher and more water resistant than Micart
- Made in the USA
- See more on Amazon...
Brand: USA Knifemaker Supply | Manufacturer: Current Composites
See On Amazon Similar To G10 Knife ScalesEarth Brown 1
#1
AOHOCA 2 pcs G10 Micarta Knife Handle Scales Slabs Knives Custom DIY Tool Material for Knife Making Blanks Blades (Fluorescent green&Black)
Asin: B085P19D8H | Ean: 0763032021732 | UPC: 763032021732
Create Your Own Beautiful Knife Handles For Your Own Custom Knives Handle Grips.
Please Note These Come In The Raw State. They Do Not Come Pre-Carved Or Pre-Shaped.The Pattern,Texture And Color Not Exactly Alike Per Individual Piece..
It Is Very Dense, Lightweight, And Impervious To Water. Makes For A Very Tough And Durable Handle Material..
Sold As 2 Pcs. Each Size Is 120X40x8mm.
Features
- G10 Micarta Knife Scales Laminate Slabs
- Sold as 2 pcs. Each Size is 120x40x8mm
- Create your own beautiful knife handles for your own custom knives handle grips
- It is very dense, lightweight, and impervious to water. Makes for a very tough and durable handle material.
- Please note these come in the raw state. They do not come pre-carved or pre-shaped.The pattern,texture and color not exactly alike per individual piece.
- See more on Amazon...
Brand: AOHOCA | Manufacturer: AOHOCA
Dimensions: 0.31 x 0.00 x 0.00 inches
See On Amazon #2
WoodRiver Green & Tan G10, 8mm x 1-1/2" x 5" Knife Scale, 2-Pieces
Asin: B07Z5FD296 | Ean: 0844788056251 | UPC: 844788056251
Excellent Choice For Outdoor Applications.
Woodriver Is Proudly Made By Woodcraft, America’S Leading Supplier Of High-Quality Woodworking Hand Tools, Power Tools, Domestic And Exotic Wood, Shop Supplies, Project Plans And Kits, Plus So Much More! Offering First-Rate Products For All Your Woodworking Needs And Designed To Help You Make Wood Work. Our Family Of Brands Include Woodcraft Tools And Supplies, Highpoint Professional-Grade Fasteners And Hardware, Pinnacle Precision-Engineered Tools And Woodcraft Magazine..
Can Be Shaped With Files, Rasps, And Sandpaper - Scales Measure 8Mm X 1-1/2" X 5".
Material Is Hard, Durable, And Lightweight.
Features
- Use of personal protection equipment is a must
- Material is hard, durable, and lightweight
- Excellent choice for outdoor applications
- Can be shaped with files, rasps, and sandpaper - Scales measure 8mm x 1-1/2 x 5
- WoodRiver is proudly made by Woodcraft, America s leading supplier of high-quality woodworking hand tools, power tools, domestic and exotic wood, shop supplies, project plans and kits, plus so much more! Offering first-rate products for all your woodworking needs and designed to help you make wood work. Our family of brands include Woodcraft tools and supplies, Highpoint professional-grade fasteners and hardware, Pinnacle precision-engineered tools and Woodcraft Magazine.
- See more on Amazon...
Brand: WOODRIVER | Manufacturer: Woodcraft Supply
Dimensions: 0.90 x 5.60 x 2.45 inches | Weight: 0.39 Pounds
See On Amazon #3
G10 Scales Natural Jade Green 1/4" X 1.5" X 5.5" Knife Handle Grip Slabs
Asin: B07MJJ6NTR | Ean: 0791265644701 | UPC: 791265644701
Country/Region Of Manufacture:United States.
Brand: Unbranded.
Features
- Item specifics Condition: New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller's listing for full details.
- Brand: Unbranded
- Country/Region of Manufacture:United States
- See more on Amazon...
Brand: SuperDi | Manufacturer: SuperDi
See On Amazon #4
AOHOCA 2 pcs G10 Knife Scales Handle Material,Knifemakers Sword DIY Slabs Grips Micarta Slab Material (Black&Red)
Asin: B082MC6QFW | Ean: 0763032021633 | UPC: 763032021633
Create Your Own Beautiful Knife Handles For Your Own Custom Knives Handle Grips.
Please Note These Come In The Raw State. They Do Not Come Pre-Carved Or Pre-Shaped.The Pattern,Texture And Color Not Exactly Alike Per Individual Piece..
It Is Very Dense, Lightweight, And Impervious To Water. Makes For A Very Tough And Durable Handle Material..
Sold As 2 Pcs. Each Size Is 120X40x8mm.
Features
- G10 Knife Scales Micarta Laminate Slabs
- Sold as 2 pcs. Each Size is 120x40x8mm
- Create your own beautiful knife handles for your own custom knives handle grips
- It is very dense, lightweight, and impervious to water. Makes for a very tough and durable handle material.
- Please note these come in the raw state. They do not come pre-carved or pre-shaped.The pattern,texture and color not exactly alike per individual piece.
- See more on Amazon...
Brand: AOHOCA | Manufacturer: AOHOCA
See On Amazon #5
N/C NC HAISDA G10 Scales knife Handle Material Knifemakers Sword DIY Slabs Grips Micarta Blanks Slabs Material pack of 2 Jade
Asin: B09512GTHY | Ean: 0728872854490 | UPC: 728872854490
Create Your Own Beautiful Knife Handles For Your Own Custom Knives Handle Grips.
Please Note These Come In The Raw State. They Do Not Come Pre-Carved Or Pre-Shaped.The Pattern,Texture And Color Not Exactly Alike Per Individual Piece..
Sold As 2 Pcs. Each Size Is 120X40x8mm.
It Is Very Dense, Lightweight, And Impervious To Water. Makes For A Very Tough And Durable Handle Material..
Features
- G10 Micarta Knife Scales Laminate Slabs
- It is very dense, lightweight, and impervious to water. Makes for a very tough and durable handle material.
- Create your own beautiful knife handles for your own custom knives handle grips
- Sold as 2 pcs. Each Size is 120x40x8mm
- Please note these come in the raw state. They do not come pre-carved or pre-shaped.The pattern,texture and color not exactly alike per individual piece.
- See more on Amazon...
Brand: NC
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #6
Ultrex G10 Knife Handle Material-3/16" Scales (Black/Hunter Orange)
Asin: B0B4YLSFZC | Ean: 0616639498332 | UPC: 616639498332
Made In The Usa.
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered By The Westinghouse Company For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Now Available In Several Different Colors, Combinations, And Surface Treatments, Ultrex Paper And Cotton Phenolic Materials Use The Original Production Methods Of Westinghouse, Updated With Today’S Process And Environmental Controls. And Unlike Other “Micarta” Available In The Market, Ultrex Micarta Is Produced In The Usa..
Scales Are 1.5"X6", Sold As A Pair.
Features
- Use for knifemaking, very durable!
- Scales are 1.5x6, sold as a pair
- Made in the USA
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods of Westinghouse, updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered by the Westinghouse company for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- See more on Amazon...
Brand: USA Knifemaker Supply | Manufacturer: Norplex
See On Amazon #7
Whole Earth Supply G-10 G10 Green Black Quality Handle Scales Knives Guns Grips 5in Knife Making Set Pair
Asin: B01LBN9BQI | Ean: 0763616479355 | UPC: 763616479355
Approximately 54 Layers (Alternating Black And Green) Per Piece Of Handle Material..
2 Pieces With Each Set. Please Note These Do Not Come Pre-Carved Or Pre-Shaped. They Come In The Raw State Of Pair Of Two Blocks Of G-10 Material..
Use Regular Woodworking Tools To Cut And Shape This Material. When Sanded Down And Shaped, The Layers Will Become Visible, Giving An Exceptionally Handsome Look. After Sanding And Shaping Of These Scales Is Complete, It Is Recommended To Rub Vaseline On The Scales And Wipe Them Off Until They're Not Greasy. The Colors Will Pop And Vaseline Wont Evaporate Like Mineral Oil..
Length: 5 Inches Approximately, Width: 1.5 Inches Approximately, Height: 3/8 Inch.
Features
- Create your own beautiful knife handles for your own custom knives or gun handle grips!
- Length: 5 inches approximately, Width: 1.5 inches approximately, Height: 3/8 inch
- Approximately 54 layers (alternating black and green) per piece of handle material.
- Use regular woodworking tools to cut and shape this material. When sanded down and shaped, the layers will become visible, giving an exceptionally handsome look. After sanding and shaping of these scales is complete, it is recommended to rub Vaseline on the scales and wipe them off until they're not greasy. The colors will pop and Vaseline wont evaporate like mineral oil.
- 2 pieces with each set. Please note these do not come pre-carved or pre-shaped. They come in the raw state of pair of two blocks of G-10 material.
- See more on Amazon...
Brand: Whole Earth Supply | Manufacturer: Whole Earth Supply
Weight: 9.00 ounces
See On Amazon #8
Whole Earth Supply G-10 G10 Tan and Black Quality Handle Scales Knives Gun Grips Knife 5in Making Set Pair
Asin: B072F9KCF2 | Ean: 0763616535204 | UPC: 763616535204
Approximately 54 Layers (Alternating Tan And Black) Per Piece Of Handle Material. For Knife Handles Or Gun Grips..
2 Pieces With Each Set. Please Note These Do Not Come Pre-Carved Or Pre-Shaped. They Come In The Raw State Of Pair Of Two Blocks Of G-10 Material..
Use Regular Woodworking Tools To Cut And Shape This Material. When Sanded Down And Shaped, The Layers Will Become Visible, Giving An Exceptionally Handsome Look. After Sanding And Shaping Of These Scales Is Complete, It Is Recommended To Rub Vaseline On The Scales And Wipe Them Off Until They're Not Greasy. The Colors Will Pop And Vaseline Wont Evaporate Like Mineral Oil..
Length: 5 Inches Approximately, Width: 1.5 Inches Approximately, Height: 3/8 Inch.
Features
- Create your own beautiful knife handles for your own custom knives or gun handle grips!
- Length: 5 inches approximately, Width: 1.5 inches approximately, Height: 3/8 inch
- Approximately 54 layers (alternating tan and black) per piece of handle material. For knife handles or gun grips.
- Use regular woodworking tools to cut and shape this material. When sanded down and shaped, the layers will become visible, giving an exceptionally handsome look. After sanding and shaping of these scales is complete, it is recommended to rub Vaseline on the scales and wipe them off until they're not greasy. The colors will pop and Vaseline wont evaporate like mineral oil.
- 2 pieces with each set. Please note these do not come pre-carved or pre-shaped. They come in the raw state of pair of two blocks of G-10 material.
- See more on Amazon...
Brand: Whole Earth Supply | Manufacturer: Whole Earth Supply
Weight: 9.00 ounces
See On Amazon #9
UltreX G10 - Black & Tan - Knife Handle Material (1/4" Scales)
Asin: B0B4TW29DD | Ean: 0616639498691 | UPC: 616639498691
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered By The Westinghouse Company For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Now Available In Several Different Colors, Combinations, And Surface Treatments, Ultrex Paper And Cotton Phenolic Materials Use The Original Production Methods Of Westinghouse, Updated With Today’S Process And Environmental Controls. And Unlike Other “Micarta” Available In The Market, Ultrex Micarta Is Produced In The Usa..
Made In The Usa.
Features
- Scales 1.5"x6", pair of scales
- Made in the USA
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered by the Westinghouse company for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods of Westinghouse, updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- See more on Amazon...
Brand: USA Knifemaker Supply
See On Amazon #10
USA Knifemaker Supply UltreX G10 - Black Knife Handle Material (1/2" Scales)
Asin: B0B4YT2DH3 | Ean: 0616639481358 | UPC: 616639481358
Now Available In Several Different Colors, Combinations, And Surface Treatments, Ultrex Paper And Cotton Phenolic Materials Use The Original Production Methods , Updated With Today’S Process And Environmental Controls. And Unlike Other “Micarta” Available In The Market, Ultrex Micarta Is Produced In The Usa..
Scales Are 1.5"X6", Sold As A Pair.
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Various Thicknesses.
Features
- Sheet is 6"x12"
- Various Thicknesses
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods , updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Scales are 1.5x6, sold as a pair
- See more on Amazon...
Brand: USA Knifemaker Supply
See On Amazon #11
Orange G-10 Fiberglass Knife Handle Scales, 5" x 1-1/2" x 1/8" (Pair of 2)
Asin: B01GEUHCN2
Scales Are Sold As A Pair, Each Is 5" X 1-1/2" X 1/8".
Always Use A Respirator When Sanding, To Prevent Inhalation Of Glass Fibers..
Color Is Solid Orange. Sands And Buffs Well, And Polishes To A High Shine!.
It Is Very Dense, Lightweight, And Impervious To Water. Makes For A Very Tough And Durable Handle Material..
Features
- G-10 is woven fiberglass soaked in an epoxy resin and then compressed and baked.
- It is very dense, lightweight, and impervious to water. Makes for a very tough and durable handle material.
- Scales are sold as a pair, each is 5 x 1-1/2 x 1/8
- Color is solid orange. Sands and buffs well, and polishes to a high shine!
- Always use a respirator when sanding, to prevent inhalation of glass fibers.
- See more on Amazon...
Brand: Texas Knifemakers Supply | Manufacturer: Texas Knifemakers Supply
Dimensions: 0.13 x 5.00 x 1.50 inches
See On Amazon #12
G-10 Knife Scales (Black)
Asin: B07WFQXTF8
Brand: Texas Knifemakers Supply | Manufacturer: Texas Knifemakers Supply
See On Amazon #13
G10 Knife Handle-Jade Ghost Color-Knife Scales, Knife Sheets, G10, G10 Scales, Made in the USA (3/16" Scales)
Asin: B0CTR2XTV3
This G10 Is The Natural Green Color, And Is Made In The Usa.
This Is G10, An Epoxy And Glass Mat Based Laminate. It Is Exceptionally Durable And Tough Material. It Will Probably Out Last A Knife Handle. It Finishes To A Very Nice Polish With Visible Pattern And It Is Translucent. This Material Has Layered Canvas Weave Glass Matting. Wear A Respirator When Grinding Or Sanding As Any Glass Fibers Raised During Sanding Or Grinding Will Be Hard On Lungs..
Scales Are 1.5"X6" (Sold As A Pair), Sheet Is 6"X12" (Sold As A Single Piece), You Choose Size For You.
Features
- NOTE: Jade ghost has a green tone to it unlike the Sand ghost which has a slight tan tone
- Scales are 1.5x6 (sold as a pair), Sheet is 6x12 (sold as a single piece), you choose size for you
- This G10 is the natural green color, and is made in the USA
- This is G10, an epoxy and glass mat based laminate. It is exceptionally durable and tough material. It will probably out last a knife handle. It finishes to a very nice polish with visible pattern and it is translucent. This material has layered canvas weave glass matting. Wear a respirator when grinding or sanding as any glass fibers raised during sanding or grinding will be hard on lungs.
- See more on Amazon...
Brand: USA Knifemaker Supply | Manufacturer: Current Composites
See On Amazon #14
G10 Liner Sheets- .030"x6"x12"- Made in The USA, Knifemaking, Knife Handle, Knife Scales, G10 Liner (Earth Brown)
Asin: B0CW7PRW98 | Model: Sheet | PartNumber: Sheet
It Is Called A Liner When Used On A Full Tang Knife And Sandwiched Between A Scale And The Tang. It Is Called A Spacer When Stacked In Line In A Full Tang Knife. When It Is Used In A Folder Between The Scale And Metal Liner It Gets Confusing. Call It A G10 Liner..
The Advantage To This Material Is It Doesn't Absorb Water And Comes In A Wider Assortment Than Traditional Vulcanized Liner Material..
Made In The Usa.
Features
- Sheet is .030" Thick x 6" Wide x 12" Long, sold as a single piece
- Made in the USA
- It is called a liner when used on a full tang knife and sandwiched between a scale and the tang. It is called a spacer when stacked in line in a full tang knife. When it is used in a folder between the scale and metal liner it gets confusing. Call it a g10 liner.
- The advantage to this material is it doesn't absorb water and comes in a wider assortment than traditional vulcanized liner material.
- See more on Amazon...
Brand: USA Knifemaker Supply | Manufacturer: Norplex
Dimensions: 0.10 x 12.00 x 6.00 inches
See On Amazon #15
G10 Knife Scales-Earth Brown/White/Black- Knife Handle Material, Sheets, G10 Sheet, G10 Panel, Made in The USA (3/8" Scales)
Asin: B0CTR2FH2X | Model: 3/8" Scales | PartNumber: 3/8" Scales
Due To The Layering Process Of The Colors The Top And Bottom Of The Scale May Be A Different Color. When Gluing These To Your Tang Be Sure To Glue The Same Sides In. If You Do Not Your Color Layers Will Not Look The Same Once You Start Shaping The Handle Material..
G10 Is A Fiberglass Based Laminate That Is Very Durable And Tough. Wear A Respirator When Working On This Material..
This Is A 3 Color Layup In 2X2 Form, With Earth Brown, White And Black Coloring, It Is Made In The Usa.
Features
- Scales are 1.5"x6" (sold as a pair), Sheet is 6"x12" (sold as a single piece), you choose size.
- This is a 3 color layup in 2x2 form, with Earth Brown, White and Black coloring, it is made in the USA
- Due to the layering process of the colors the top and bottom of the scale may be a different color. When gluing these to your tang be sure to glue the same sides in. If you do not your color layers will not look the same once you start shaping the handle material.
- G10 is a fiberglass based laminate that is very durable and tough. Wear a respirator when working on this material.
- See more on Amazon...
Brand: USA Knifemaker Supply | Manufacturer: Current Composites
See On Amazon #16
G10 Knife Handle- Brown/Tan/Black- 3 Color G10, Knife Scales, Knife Sheet, Knife Panel, Made in the USA (3/8" Scales)
Asin: B0CTR1MV1Z | Model: 3/8" Scales | PartNumber: 3/8" Scales
The Difference Between Micarta And G10 Is: Micarta Is A High Pressure Laminate That (Often) Uses Linen Or Canvas Based Fiber. G10 Is An Epoxy Based High Pressure Laminate That Used Glass Mat (Think Fiber Glass) For The Fiber Base. G10 Is Tougher And More Water Resistant Than Micarta..
Tip: This Is Glass Based. Wear A Respirator. Wear Gloves When You Are Cutting It Too. After Cutting A Bunch Of It, I Can Feel Several Dozen Little Prickly Glass Threads In My Hands..
Due To The Layering Process Of The Colors The Top And Bottom Of The Scale May Be A Different Color. When Gluing These To Your Tang Be Sure To Glue The Same Sides In. If You Do Not Your Color Layers Will Not Look The Same Once You Start Shaping The Handle Material..
We Had This G10 Custom Made For Us. This Is A Combination Of Brown, Tan And Black. It Is Made In The Usa..
Features
- Scales are 3/8"x1.5"x6" (sold as a pair), Sheet is 3/8"x6"x12" (sold as a single piece), you choose size
- We had this G10 custom made for us. This is a combination of Brown, Tan and Black. It is made in the USA.
- The difference between Micarta and G10 is: Micarta is a high pressure laminate that (often) uses linen or canvas based fiber. G10 is an epoxy based high pressure laminate that used glass mat (think fiber glass) for the fiber base. G10 is tougher and more water resistant than Micarta.
- Due to the layering process of the colors the top and bottom of the scale may be a different color. When gluing these to your tang be sure to glue the same sides in. If you do not your color layers will not look the same once you start shaping the handle material.
- Tip: This is glass based. Wear a respirator. Wear gloves when you are cutting it too. After cutting a bunch of it, I can feel several dozen little prickly glass threads in my hands.
- See more on Amazon...
Brand: USA Knifemaker Supply | Manufacturer: Current Composites
See On Amazon
Looking For Something Else?
Search