Heavy-duty Ring Roll Bender; Sheet Metal Bead Roller; Sheet Metal Bead Roller Steel Bender; Manual Plate Steel Ring Bender; Manual Sheet Steel Ring Roll Bender
Asin: B0CVH82FTN | Model: JUANYUANQI | PartNumber: JUANYUANQI
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.*Metal Roller Bender - The Operation Is Simple And Easy To Understand. You Only Need To Install The Base On The Workbench, Put In The Crank, Then Put In The Material To Be Bent, Adjust The Bolt To Apply Downward Pressure, And Turn The Handle Back And Forth To Get The Desired Shape. It Can Be Operated By Both Women And Children.
*Widely Used In Industrial Production, Home Decoration, Fence Decoration, Diy Metal Model, Etc. Small Size, Easy To Move To Other Places To Work..
*Steel Bender - Maximum Bendable Solid Flat Steel Width 2.2In 6Cm. Thickness 0.19In 0.5Cm. The Diameter Of The Round Bar Is 0.47In 1.2Cm.
*Manual Plate Steel Ring Bender - The Parts Are Made Of High-Quality Steel, Which Is Cut By Precision Lathes, With Compact Structure And High Stability. The Two Spindles Are Equipped With High-Quality Bearings And Extended Rockers, Which Are Labor-Saving And Efficient.
Features
- * Sheet metal bender - The manual roll bender adopts a new design, the structure is simple but very practical. As a hand tool that can easily bend various metal materials into a round shape, it does not consume electricity, and is economical and environmentally friendly
- *Manual Plate Steel Ring Bender - The parts are made of high-quality steel, which is cut by precision lathes, with compact structure and high stability. The two spindles are equipped with high-quality bearings and extended rockers, which are labor-saving and efficient
- *Metal roller bender - The operation is simple and easy to understand. You only need to install the base on the workbench, put in the crank, then put in the material to be bent, adjust the bolt to apply downward pressure, and turn the handle back and forth to get the desired shape. It can be operated by both women and children
- *Steel bender - Maximum bendable solid flat steel width 2.2in 6cm. Thickness 0.19in 0.5cm. The diameter of the round bar is 0.47in 1.2cm
- *Widely used in industrial production, home decoration, fence decoration, DIY metal model, etc. Small size, easy to move to other places to work.
- See more on Amazon...
Brand: WUXIANCILANG | Manufacturer: WUXIANCILANG
Dimensions: 4.00 x 9.00 x 7.00 inches | Weight: 7.00 pounds
See On Amazon Similar To Heavyduty Ring Roll Bender Sheet
#1
HURRICANE Sheet Metal Hand Seamer, 3 Inch Straight Jaw Sheet Metal Bender Tools for Flattening Metal, Ergonomic TyreGrip Handle
Asin: B0B5SPNDCM | Model: 02-132 | PartNumber: 02-132 | Ean: 0810034074201 | UPC: 810034074201
【Comfortable Grips】 Ergonomical Tyregrip Handle With Rubberized Grip For Comfort And Control..
【Ideal For Construction Projects】 Jaw Folds 18-Gauge Galvanized Sheet, 30-Gauge Cold-Rolled Steel Sheet And 30-Gauge Stainless Steel. Use To Bend, Stitch, And Flatten Sheet Metal And Non-Ferrous Metals Without The Need For Heavy-Duty Power Tools..
【Build To Last】 Heavy Duty Precision-Forged Crv Steel With Full-Polished For Durability..
【Precision Seamer With Maximum Power And Comfortable Operating Range 】1/4 Inch Depth Marking On The Blades Allow For Quick Bends. Optimal Handle Span For Maximum Power And Comfortable Operating Range..
Features
- Manual Hand Seamers Sheet Metal Tool Excellent for bending, seaming and flattening sheet metal. Use as a sheet metal bender for HVAC projects.
- Precision Seamer with Maximum Power and Comfortable Operating Range 1/4 inch depth marking on the blades allow for quick bends. Optimal handle span for maximum power and comfortable operating range.
- Comfortable Grips Ergonomical Tyregrip Handle with rubberized grip for comfort and control.
- Build to Last Heavy duty precision-forged CRV steel with full-polished for durability.
- Ideal for Construction Projects Jaw folds 18-gauge Galvanized sheet, 30-gauge Cold-rolled steel sheet and 30-gauge stainless steel. Use to bend, stitch, and flatten sheet metal and non-ferrous metals without the need for heavy-duty power tools.
- See more on Amazon...
Brand: HURRICANE | Manufacturer: Jiangsu Sainty Sumex Tools Corp Ltd
Dimensions: 3.00 x 9.00 x 3.00 inches
See On Amazon #2
HURRICANE 18 Inch Folding Tool, Sheet Metal Bending Tool for HVAC, Bending and Forming Metal
Asin: B08YN42XT4 | Ean: 0648824020950 | UPC: 648824020950
【Ideal For Hvac Applications】Used For Bending And Forming Metal, Making Seams, Hems, Pans And Drive Edges..
【Constructed Of Heavy 16-Gauge Steel】Powder-Coated Low Carbon Steel To Resist Rust..
【Ensures Precise And Accurate Bends】Handy Sight Holes Assure Accurate Bending Depth Alignment..
【Two Folding Depths】Creates 3/8" And 1" Depth Folding In Ductwork..
Features
- Sheet Metal Folding Tool Hurricane 18" sheet metal folding tools offer a premium choice for bending and forming metal, folding seams are formed from 2 steel halves, permanently joined together.
- Two Folding Depths Creates 3/8 and 1 depth folding in ductwork.
- Ideal for HVAC Applications Used for bending and forming metal, making seams, hems, pans and drive edges.
- Ensures Precise and Accurate Bends Handy sight holes assure accurate bending depth alignment.
- Constructed of Heavy 16-Gauge Steel Powder-coated low carbon steel to resist rust.
- See more on Amazon...
Brand: HURRICANE | Manufacturer: Jiangsu Sainty Sumex Tools Corp
See On Amazon #3
Hand Seamer, 6in Straight Jaw Sheet Metal Bender Tools, Sheet Metal Seamer Form Edge Seamer Seaming Plier with Ergonomic Handle, for Bending and Flattening Sheet Metal Hand Tool
Asin: B0C58HTVDP | Model: MD-0054 | PartNumber: MD-0054
【Precision Seam】- The Straight Seam Double Jaws Are Marked With Gaps In 1/4In Increments, Which Makes It Easier To Control The Clamping Depth. The Anti-Skid Lines In The Jaws Prevent The Metal Plate From Sliding..
【Wide Application】- It Is A Special Tool For The Construction And Design Of Door And Window Structure, Suitable For 150/75 Series Light Steel Keel, Curved Metal, Plastic Board, Etc..
【Ergonomic Handle】- Double-Layer Pitted Handle, Non-Slip And Comfortable, Improve Work Efficiency And Reduce Construction Fatigue. Built-In Switch Lock, Can Be Locked When Not In Use, Easy To Carry..
【6 Inch Wide Jaw】- The 6 Inch Jaw Span Provides A Strong Surface Range For Work. It Can Easily And Accurately Bend, Stitch And Flatten Metal In Hard-To-Reach Narrow Spaces..
Features
- High-quality Material - The hand seamer is made of chromium-vanadium alloy steel, which has been austenitic heat treated, and has the greatest strength and durability.
- 6 Inch Wide Jaw - The 6 inch jaw span provides a strong surface range for work. It can easily and accurately bend, stitch and flatten metal in hard-to-reach narrow spaces.
- Precision Seam - The straight seam double jaws are marked with gaps in 1/4in increments, which makes it easier to control the clamping depth. The anti-skid lines in the jaws prevent the metal plate from sliding.
- Ergonomic Handle - Double-layer pitted handle, non-slip and comfortable, improve work efficiency and reduce construction fatigue. Built-in switch lock, can be locked when not in use, easy to carry.
- Wide Application - It is a special tool for the construction and design of door and window structure, suitable for 150/75 series light steel keel, curved metal, plastic board, etc.
- See more on Amazon...
Brand: Mdvora | Manufacturer: Mdvora
See On Amazon #4
DURATECH 3 Inch Sheet Metal Bender, Hand Seamers Sheet Metal Tools with Ergonomic TPR Handle, Straight Jaw Metal Bending Pliers for Bending, Seaming and Flattening Metal
Asin: B0CCXDZJX2 | Ean: 0820909796435 | UPC: 820909796435
【Ergonomic Tpr Handle】Compared With Dip Molded Handle And Hard Molded Handle, Our Tpr Handle With Anti-Slip Pattern Is More Comfortable To Hold, Which Can Effectively Reduce Hand Fatigue And Improve Work Efficiency; The End Of The Handle Has A Hanging Hole, Which Is Easy To Carry And Work At Heights..
【Widely Used】 The Metal Bender Is Suitable For A Variety Of Sheet Metal Working Tasks, Such As Metal Fabrication Art Projects, Metal Roof Edging, Window And Door Construction Design, Hvac Duct Work, Body Repairs, Etc. It's Ideal For Professional Workers And Diy Enthusiasts..
【Safety And Labor Saving】This Hand Seamer Are Equipped With A Safety Lock, Easy To Open And Close, Convenient To Store And Carry. We Have Also Reduced The Overall Weight Of The Bending Tool And Adopted A Labor-Saving Spring Design, Which Makes The Bending Pliers More Labor-Saving To Use..
【Precision Bending】Metal Bending Pliers Have 3 Inches Long And 1.25 Inches Wide Jaws. The 1/4 Inch Incremental Notches Marked On The Side Of The Jaws Allow For Precise Measurements And Control Of Clamping Depth. The Non-Slip Pattern Inside The Jaws Effectively Tightens The Metal Plate And Prevents It From Slipping..
Features
- Excellent Metal Bending Tool This 3-inch straight jaw sheet metal bender is designed to bend, seam, flatten or straighten sheet metal. It can help you easily bend and flatten up to 30 gauge cold rolled sheet, 18 gauge galvanized sheet and 30 gauge sheet stainless steel sheet.
- Precision Bending Metal bending pliers have 3 inches long and 1.25 inches wide jaws. The 1/4 inch incremental notches marked on the side of the jaws allow for precise measurements and control of clamping depth. The non-slip pattern inside the jaws effectively tightens the metal plate and prevents it from slipping.
- Ergonomic TPR Handle Compared with dip molded handle and hard molded handle, our TPR handle with anti-slip pattern is more comfortable to hold, which can effectively reduce hand fatigue and improve work efficiency; the end of the handle has a hanging hole, which is easy to carry and work at heights.
- Safety and Labor Saving This hand seamer are equipped with a safety lock, easy to open and close, convenient to store and carry. We have also reduced the overall weight of the bending tool and adopted a labor-saving spring design, which makes the bending pliers more labor-saving to use.
- Widely Used The metal bender is suitable for a variety of sheet metal working tasks, such as metal fabrication art projects, metal roof edging, window and door construction design, HVAC duct work, body repairs, etc. It's ideal for professional workers and DIY enthusiasts.
- See more on Amazon...
Brand: DURATECH | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO. LTD
See On Amazon #5
BILITOOLS 3-Piece Hand Seamers Sheet Metal Tools, Sheet metal Bending Pliers Set Straight, 45 & 90 Metal Bender Tool
Asin: B09WRCDD92 | Model: B1S98427 | PartNumber: B1S98427 | Ean: 6974676370375
Made Of High Quality, Heat Treated Drop Forged Carbon Steel, These Tools Are Made With Longevity And Durability. Hardness Approx. 30 To 35 Hrc. Complete With A Black Finish With Red Dipped Handles..
Please Note: The Metal Benders May Being A Bit Stiff To Open/Close At First, But They Will Start To Loosen Up After A While..
The Pliers Jaw Close Perfectly Parallel And The Edges Of The Pliers Head Are Very Straight—But They Are Not Sharp. Sheet Metal Is Not Damaged When Bending Through The Jaws Of The Pliers..
Designed For Bending Or Straightening Sheet Metal Edge. Ideal Tool For Use On The Car When It Is Not Possible To Use A Bench Folding Machine Or In Tight Areas..
Features
- Three sizes of sheet metal bending pliers for your selection: straight jaw, 45 degree jaw, 90 degree jaw. These hand seamers are 2-3/8'' (60mm) wide.
- Designed for bending or straightening sheet metal edge. Ideal tool for use on the car when it is not possible to use a bench folding machine or in tight areas.
- Made of high quality, heat treated drop forged carbon steel, these tools are made with longevity and durability. Hardness approx. 30 to 35 HRC. Complete with a black finish with red dipped handles.
- The pliers jaw close perfectly parallel and the edges of the pliers head are very straight but they are not sharp. Sheet metal is not damaged when bending through the jaws of the pliers.
- Please note: the metal benders may being a bit stiff to open/close at first, but they will start to loosen up after a while.
- See more on Amazon...
Brand: BILITOOLS | Manufacturer: BILITOOLS
See On Amazon #6
MAXPOWER Sheet Metal Bender, 3-Inch Offset Metal Bender Sheet Metal Hand Seamer for Bending and Flattening Metal, Sheet Metal Bending Tool with Ergonomic Handle
Asin: B0C231NXC1 | Model: MXP160 | PartNumber: MXP160 | Ean: 6936279526115
【Build To Last】 Hand Seamer Is Made Of Alloy Steel Construction With A Nickel-Plated Finish For Durability..
【Wide Application】It Is Suitable For 150/75 Series Light Steel Keel, Curved Metal, Plastic Board, Etc..
【Ergonomic Handle Design】 Non-Slip And Comfortable, Improve Work Efficiency And Reduce Construction Fatigue. Built-In Switch Lock Can Be Locked When Not In Use, Easy To Carry.
【Precision Seamer】 Casting Jaws Are Marked In 1/4 Inch Bending Increments. The Anti-Skid Lines In The Jaws Prevent The Metal Plate From Sliding..
Features
- 3 Inch Wide Jaw The 3 inches jaw span provides a strong surface range for work. The offset design can easily and accurately bend, stitch and flatten metal in hard-to-reach narrow spaces.
- Precision Seamer Casting jaws are marked in 1/4 inch bending increments. The anti-skid lines in the jaws prevent the metal plate from sliding.
- Build to Last Hand seamer is made of alloy steel construction with a nickel-plated finish for durability.
- Ergonomic Handle Design Non-slip and comfortable, improve work efficiency and reduce construction fatigue. Built-in switch lock can be locked when not in use, easy to carry
- Wide Application It is suitable for 150/75 series light steel keel, curved metal, plastic board, etc.
- See more on Amazon...
Brand: MAXPOWER | Manufacturer: MAXPOWER
Dimensions: 4.72 x 11.81 x 4.72 inches
See On Amazon #7
Zimpty Sheet Metal Hand Seamer, 6 Inch Jaw Straight Metal Pipe Bender Manual Metal Bending Pliers Tool with Comfort Grip Handle, for Flattening, Bending, Seaming, Metal Sheet,Ergonomic TyreGrip Handle
Asin: B0BVJZ2VV7 | Model: ZY321 | PartNumber: ZY321
Characteristics: Casting Jaws Are Marked In 1/4 Inch Bend Increments..
Comfortable Use: The Ergonomic Handle And Comfortable Grip Correspond To The Movement Of The User's Hand..
High Quality: High-Strength Steel Is Hot Forged, Nickel-Plated, Durable..
Features
- Function: Used to bend or form sheet metal and other flexible plates.
- High Quality: High-strength steel is hot forged, nickel-plated, durable.
- Characteristics: Casting jaws are marked in 1/4 inch bend increments.
- Comfortable use: The ergonomic handle and comfortable grip correspond to the movement of the user's hand.
- See more on Amazon...
Brand: Zimpty | Manufacturer: Zimpty
See On Amazon #8
HighFree 3 Inch Straight Jaw Sheet Manual Metal Bending Pliers Sheet Metal Hand Seamer
Asin: B08TMVCN3Q | Model: HFUS-0383121 | PartNumber: HFUS-0383121
A Compound Leverage Design Provides Better Control And A Powerful Grip While Working. Both Clamping Surfaces Are Equipped With Anti-Slip Design..
Ideal For Construction Projects Such As Roofing, Siding, And Hvacr (Heating Ventilation Air Conditioning And Refrigeration), Or A Manual Sheet Metal Folding Tool For Metal-Working Art Projects..
With Drop Forged Steel Construction And Dual-Layer Rubber Handle With Comfortable Soft Grip, Anti-Slip, Which Can Increase Work Efficiency, Helps You To Bend, Stitch, And Flatten Sheet Metal, This Metal Seamer Is An Essential Tool For Any Metal Worker..
This Powerful Straight Sheet Metal Seamer Flattens, Crimpes And Bends Metal Without The Need For Heavy-Duty Power Tools..
Features
- The 3 inch straight hand seamer is made of heavy-duty all-steel constructions with nickel-plated surfaces for durability.
- This powerful straight sheet metal seamer flattens, crimpes and bends metal without the need for heavy-duty power tools.
- A compound leverage design provides better control and a powerful grip while working. Both clamping surfaces are equipped with anti-slip design.
- With drop forged steel construction and dual-layer rubber handle with comfortable soft grip, anti-slip, which can increase work efficiency, helps you to bend, stitch, and flatten sheet metal, this metal seamer is an essential tool for any metal worker.
- Ideal for construction projects such as roofing, siding, and HVACR (Heating Ventilation Air Conditioning and Refrigeration), or a manual sheet metal folding tool for metal-working art projects.
- See more on Amazon...
Brand: HighFree | Manufacturer: HighFree
See On Amazon #9
Socpuro Sheet Metal Hand Seamer, 6 Inch Straight Jaw Sheet Metal Bender Tool Non-Slip Handle Seamer Tool for Bending and Flattening Sheet Metal
Asin: B0C9C23X87 | Model: SCP-055 | PartNumber: SCP-055
【Comfort Grip】 Two-Tone Frosted Handles Are Easy To Hold And Gain Excellent Handle Leverage To Reduce Operator Fatigue. The Spring-Loaded Design And Reinforced Rivets Provide The Proper Adjustable Pressure And Working Range To Fit Any Metalworking Or Hvac Ductwork Project..
【Wide Application】Socpuro Manual Sheet Metal Seamer Is Perfect Tool For Construction Projects, Window And Door Construction Designs Such As Roofing, Siding And Hvacr (Heating, Ventilation, Air Conditioning And Refrigeration), Or Metal Fabrication Art Projects..
【Sturdy Material】The Hand Seamer Is Made Of Chrome Vanadium Alloy Steel, Hardened And Heat-Treated For Corrosion Resistance And High Hardness To Ensure Long-Lasting Durability. Easily And Accurately Bend, Stitch And Flatten Metal In Hard-To-Reach Confined Spaces..
【Precise Seams】 6-Inch Jaws Facilitate Bending Operations On Large Areas. Manual Sealer Dual Jaws Mark The Gap In 1/4In Increments For Precise Bending Measurements And Easier Control Of Clamping Depth. Anti-Slip Lines In The Jaws Prevent Sheet Metal From Sliding..
Features
- Heavy-Duty Seamer Socpuro 6 inch hand-sealed sheet seam tool is designed to bend, seam and flatten sheet metal, non-ferrous metals without the need for heavy duty power tools.
- Precise seams 6-inch jaws facilitate bending operations on large areas. Manual sealer dual jaws mark the gap in 1/4in increments for precise bending measurements and easier control of clamping depth. Anti-slip lines in the jaws prevent sheet metal from sliding.
- Comfort Grip Two-tone frosted handles are easy to hold and gain excellent handle leverage to reduce operator fatigue. The spring-loaded design and reinforced rivets provide the proper adjustable pressure and working range to fit any metalworking or HVAC ductwork project.
- Sturdy Material The hand seamer is made of chrome vanadium alloy steel, hardened and heat-treated for corrosion resistance and high hardness to ensure long-lasting durability. Easily and accurately bend, stitch and flatten metal in hard-to-reach confined spaces.
- Wide Application Socpuro manual sheet metal seamer is perfect tool for construction projects, window and door construction designs such as roofing, siding and HVACR (heating, ventilation, air conditioning and refrigeration), or metal fabrication art projects.
- See more on Amazon...
Brand: Socpuro | Manufacturer: Socpuro
See On Amazon #10
MAXPOWER Sheet Metal Hand Seamer, 6 Inch Straight Jaw Sheet Metal Bender Tools with Ergonomic Handle
Asin: B09V2J7DL5 | Model: MXP103 | PartNumber: MXP103 | Ean: 6936279522513
【Ergonomic Handle Design】Non-Slip And Comfortable, Improve Work Efficiency And Reduce Construction Fatigue. Built-In Switch Lock, Can Be Locked When Not In Use, Easy To Carry..
【Wide Application】It Is Suitable For 150/75 Series Light Steel Keel, Curved Metal, Plastic Board, Etc..
【Precision Seamer】Casting Jaws Are Marked In 1/4 Inch Bending Increments. The Anti-Skid Lines In The Jaws Prevent The Metal Plate From Sliding..
【6 Inch Wide Jaw】The 6 Inch Jaw Span Provides A Strong Surface Range For Work. It Can Easily And Accurately Bend, Stitch And Flatten Metal In Hard-To-Reach Narrow Spaces..
Features
- Build to Last MAXPOWER Hand Seamer is made of heavy duty all steel construction with nickel plated finish for durability.
- 6 Inch Wide Jaw The 6 inch jaw span provides a strong surface range for work. It can easily and accurately bend, stitch and flatten metal in hard-to-reach narrow spaces.
- Ergonomic Handle Design Non-slip and comfortable, improve work efficiency and reduce construction fatigue. Built-in switch lock, can be locked when not in use, easy to carry.
- Precision Seamer Casting jaws are marked in 1/4 inch bending increments. The anti-skid lines in the jaws prevent the metal plate from sliding.
- Wide Application It is suitable for 150/75 series light steel keel, curved metal, plastic board, etc.
- See more on Amazon...
Brand: MAXPOWER | Manufacturer: MAXPOWER
See On Amazon #11
KAKA INDUSTRIAL PR-3 Ring Roll Bender, 3inch Manual Roll Bender,Manual Sheet Steel Ring Roll Bender up to 1/4" round bar and 1" x 3/16" flat bar, easy to operate.
Asin: B015KDO5S4 | Model: 176001 | PartNumber: 176001 | Ean: 0715462256482, 0745369240567 | UPC: 715462256482, 745369240567
2-Bend Minimum Metal Ring Diameter 3 Inch.
4-All Surfaces Are Heat-Treated And Hardened For Long Life.
3-Create Rings From 3 In. Diameter To As Large As You Need.
1-Max Rod Bar Capacity Is 1/4" And 1"X1/8" For Flat Bar Stock.
Features
- Key Benefits for PR-3 Manual Plate Steel Ring Roll Bender
- 1-Max rod bar capacity is 1/4 and 1x1/8 for flat bar stock
- 2-Bend minimum metal ring diameter 3 inch
- 3-Create rings from 3 in. diameter to as large as you need
- 4-All surfaces are heat-treated and hardened for long life
- See more on Amazon...
Brand: KAKA | Manufacturer: KAKA INDUSTRIAL LLC
Dimensions: 8.27 x 14.17 x 7.87 inches | Weight: 13.00 pounds
See On Amazon #12
18 Inch Metal Bender Hand Tool,Sheet Metal Folding Tool for Duct Bending,Metal Bending Tools,Yellow
Asin: B0CLRPYBS2 | Model: no | PartNumber: no
Two Folding Depths: This Bending Tool Offers 3/8" And 1" Folding Depths, Catering To Various Requirements In Handling Seams, Edges, Flat Bottoms, Or Driving Edges In Pipeline Systems And Metal Manufacturing..
Versatile Application: Our Sheet Metal Folding Tool Enables Precise Bending, Enhancing The Efficiency And Functionality Of Pipeline Systems. It Is Particularly Well-Suited For Hvac Applications..
With Sight Holes: Design With Convenient Sight Holes, The Folding Tool Aids In Accurately Aligning The Bending Depth. This Feature Ensures Consistently Precise Folds, Allowing You To Easily Achieve Professional-Grade Results..
Metal Bending Tool: Our Sheet Metal Folding Tool Is Designed To Effortlessly And Precisely Bend Metal Into The Desired Shapes, The Folded Seam Is Formed By Permanently Joining Two Half-Steels..
Features
- Strong Material: Made from heavy-duty 16-gauge steel, this sheet metal folding tool is robust, rust-resistant, and corrosion-resistant, ensuring long-lasting use.
- Metal Bending Tool: Our sheet metal folding tool is designed to effortlessly and precisely bend metal into the desired shapes, the folded seam is formed by permanently joining two half-steels.
- Two Folding Depths: This bending tool offers 3/8 and 1 folding depths, catering to various requirements in handling seams, edges, flat bottoms, or driving edges in pipeline systems and metal manufacturing.
- With Sight Holes: Design with convenient sight holes, the folding tool aids in accurately aligning the bending depth. This feature ensures consistently precise folds, allowing you to easily achieve professional-grade results.
- Versatile Application: Our sheet metal folding tool enables precise bending, enhancing the efficiency and functionality of pipeline systems. It is particularly well-suited for HVAC applications.
- See more on Amazon...
Brand: Zhitaoxun | Manufacturer: Zhitaoxun
See On Amazon #13
ER3 Three-Station Edge Roller Bender, Large Radius Sheet Metal Bead Roller Bender/Brake, 0-90 Bending Angle, Adjustable for Making 5/8" to 4" (16 to 102 MM) Bends in 29 to 22-Gauge Steel
Asin: B0BNHYR7B8 | Model: MTB-2 | PartNumber: MTB-2
Accurate Depth Gauge - There Is A Precision English/Metric Depth Gauge On One Shaft Leg Of The Center Roller Station Of The Er3 Metal Edge Roller. When Locked In Place At The Desired Setting, You Can Accurately Align The Depth Of All Roller Stations，Then Get The Accurate Size Of Bends You Need..
Tips From Marketty - Make Sure You Have A Straight Cutting Edge On The Material You Are Bending And Do Not Bend The Material Quickly To Prevent Rippling Of The Material. Apply Light Pressure To The Metal Bending Tool And Make Several Bends, Each Time Bending The Material Upwards By Approximately 10-20 Degrees. For A 90 Degree Bend You Should Plan To Have The Tool Run Back And Forth At Least 5 To 8 Times. Any Question Please Feel Free To Contact Us, We Will Always Be Here Ready For Help..
Quality Construction - With Upgraded Aluminum Alloy Handle, Our Sheet Metal Bender Offer You A Comfortable Grip. Jobs That Require Moving Will Become Hassle-Free, Ands Comfortable Adjustment Knob Holds The Depth Setting Securely In Place. Made From High-Quality Nylon And Tough Metal. Which Ensure Long Service Life For This Bead Roller..
Create Curved Bends - Exclusive 3-Station Bead Roller Design Produces A Uniform Bend, Outer Rollers May Travel Off Material Out To The Very Ends Of A Straight Panel Length, Assuring A Uniform Bend Along The Entire Length Of The Material. The Centre Roll Station Of The Sheet Metal Tools Can Be Adjusted Independently To Create Curved Bends And The Outer Roll Station Retracted And Locked To Allow Bending In Curves..
Features
- Easy to Adjust - Sheet metal brake for clean, crisp bends in metal roofing materials(e.g. steel/aluminium/Copper etc.), Making 5/8" to 4" (16 to 102 mm) bends in 29 to 22-gauge (0.36 to 0.76 mm) steel. The ER3 is capable of bending straight bends of an infinite length up to 90 degrees.
- Create Curved Bends - Exclusive 3-station bead roller design produces a uniform bend, outer rollers may travel off material out to the very ends of a straight panel length, assuring a uniform bend along the entire length of the material. The centre roll station of the sheet metal tools can be adjusted independently to create curved bends and the outer roll station retracted and locked to allow bending in curves.
- Accurate Depth Gauge - There is a precision English/Metric depth gauge on one shaft leg of the center roller station of the ER3 Metal Edge Roller. When locked in place at the desired setting, you can accurately align the depth of all roller stations then get the accurate size of bends you need.
- Quality Construction - With upgraded aluminum alloy handle, our sheet metal Bender offer you a comfortable grip. Jobs that require moving will become hassle-free, ands comfortable adjustment knob holds the depth setting securely in place. Made from high-quality nylon and tough metal. which ensure long service life for this bead roller.
- Tips from Marketty - Make sure you have a straight cutting edge on the material you are bending and do not bend the material quickly to prevent rippling of the material. Apply light pressure to the metal bending tool and make several bends, each time bending the material upwards by approximately 10-20 degrees. For a 90 degree bend you should plan to have the tool run back and forth at least 5 to 8 times. Any question please feel free to contact us, we will always be here ready for help.
- See more on Amazon...
Brand: MARKETTY | Manufacturer: MARKETTY
See On Amazon #14
MIDWEST Seamer - 15 Inch Straight Sheet Metal Bender with Aluminum Blades & KUSH'N-POWER Comfort Grip Handle - MWT-S15
Asin: B00UM3YFSS | Model: MWT-S15 | PartNumber: MWT-S15 | Ean: 0727226131119 | UPC: 727226131119
Heavy Duty Components -Brackets Are Hot Drop-Forged Of High Carbon Steel For Strength And Durability.
Comfortable Grips - Kush'n-Power Grips Conforms With The Motion Of The User's Hands And The Indented Ribs Prevent Hand And Finger Slippage.
Strongest Handles - High Tensile Strength Steel Will Not Bend From Hand Pressure And Provides Efficient Conversion Of Hand Force.
Interchangeable Blades - Aluminum Blades Available In 5", 9" And 15" Sizes With Quick Change Over.
Features
- STRAIGHT HANDLE SEAMER - Use to bend or form sheet metal and other pliable sheet materials. 1-1/4" throat depth with 1/4" depth graduations
- INTERCHANGEABLE BLADES - Aluminum blades available in 5, 9 and 15 sizes with quick change over
- HEAVY DUTY COMPONENTS -Brackets are hot drop-forged of high carbon steel for strength and durability
- STRONGEST HANDLES - High tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force
- COMFORTABLE GRIPS - Kush'N-Power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage
- See more on Amazon...
Brand: Midwest Snips | Manufacturer: Midwest Tool and Cutlery
Dimensions: 3.50 x 10.00 x 15.00 Inches | Weight: 2.00 pounds
See On Amazon #15
MAXPOWER Sheet Metal Bender, 3-Inch Straight Jaw Metal Bender Hand Seamer for Bending and Flattening Metal, Sheet Metal Bending Tool with Ergonomic Handle
Asin: B0C2311FBH | Ean: 6936279526108
【Build To Last】 Hand Seamer Is Made Of Alloy Steel Construction With A Nickel-Plated Finish For Durability..
【Wide Application】It Is Suitable For 150/75 Series Light Steel Keel, Curved Metal, Plastic Board, Etc..
【Precision Seamer】 Casting Jaws Are Marked In 1/4-Inch Bending Increments. The Anti-Skid Lines In The Jaws Prevent The Metal Plate From Sliding.
【Ergonomic Handle Design】 Non-Slip And Comfortable, Improve Work Efficiency And Reduce Construction Fatigue. Built-In Switch Lock Can Be Locked When Not In Use, Easy To Carry..
Features
- 3 Inch Wide Jaw The 3-inch jaw span provides a strong surface range for work. The offset design can easily and accurately bend, stitch, and flatten metal in hard-to-reach narrow spaces.
- Ergonomic Handle Design Non-slip and comfortable, improve work efficiency and reduce construction fatigue. Built-in switch lock can be locked when not in use, easy to carry.
- Build to Last Hand seamer is made of alloy steel construction with a nickel-plated finish for durability.
- Precision Seamer Casting jaws are marked in 1/4-inch bending increments. The anti-skid lines in the jaws prevent the metal plate from sliding
- Wide Application It is suitable for 150/75 series light steel keel, curved metal, plastic board, etc.
- See more on Amazon...
Brand: MAXPOWER | Manufacturer: MAXPOWER
Dimensions: 5.12 x 11.81 x 4.72 inches
See On Amazon #16
AMERICAN MUTT TOOLS Sheet Metal Hand Seamer - 3 Inch Sheet Metal Bender with 1/4" Depth Markings | Metal Bending Tool, Aluminum Siding Seamer, Straight Seamer, Tong HVAC Hand Seamers Sheet Metal Tools
Asin: B099CJJBCD | Model: TH105-102 | PartNumber: TH105-102 | Ean: 0850032520065 | UPC: 850032520065
Precise: The Hand Metal Bender Tools Folding Heads Feature 1/4 Inch Depth Markings Allow You To Quickly And Accurately Bend Sheet Metal. The Integrated Safety Lock Keeps Your Hand Tin Seamer Compact For Easy Storage And Safe From Damage..
Limited Lifetime Manufacturer Warranty: These Hand Seamers Sheet Metal Tools Are Backed By The American Mutt Tools Limited Lifetime Warranty For Your Complete Peace Of Mind. These Sheet Metal Tongs Hvac Are Professionally Made In China..
Built To Last: Every Square Inch Of This Sheet Metal Seamer Tool Is Covered In A Zinc Plated Finish That Allows It To Stand The Test Of Time In Even The Harshest Conditions. This Tong Hvac Hand Seemer Will Stand Up To Construction Jobsite Conditions..
Ergonomic: Give Your Hands The Break They Deserve. Our Sheet Metal Pliers Ergonomic Handle Design Helps Eliminate Fatigue From Extended Use. Each Of Our Flashing Tools And Sheetmetal Ductwork Tools Have A Lanyard Tether Hole For Working At Heights..
Features
- Heavy Duty: Precision forged from alloy steel, our portable sheet metal benders work just as hard as you do. Hand seamers help you easily bend and flatten up to 22 gauge sheet steel and 24 gauge sheet stainless steel without the need for power tools.
- Ergonomic: Give your hands the break they deserve. Our sheet metal pliers ergonomic handle design helps eliminate fatigue from extended use. Each of our flashing tools and sheetmetal ductwork tools have a lanyard tether hole for working at heights.
- Precise: The hand metal bender tools folding heads feature 1/4 inch depth markings allow you to quickly and accurately bend sheet metal. The integrated safety lock keeps your hand tin seamer compact for easy storage and safe from damage.
- Built To Last: Every square inch of this sheet metal seamer tool is covered in a zinc plated finish that allows it to stand the test of time in even the harshest conditions. This tong hvac hand seemer will stand up to construction jobsite conditions.
- Limited Lifetime Manufacturer Warranty: These hand seamers sheet metal tools are backed by the American Mutt Tools Limited Lifetime Warranty for your complete peace of mind. These sheet metal tongs hvac are professionally made in China.
- See more on Amazon...
Brand: AMERICAN MUTT TOOLS | Manufacturer: American Mutt Tools
See On Amazon #17
Almhs Tool Manual Mounting Mini Universal Bending Bender
Asin: B06XRTV1H6 | Model: 11-0043 | PartNumber: 11-0043 | Ean: 0763230010385 | UPC: 763230010385
Brand: Almhs | Manufacturer: Almhs
See On Amazon #18
NyVoozy Three-Station Edge Roller Bender for bending metal roofing materials 0-90 , sheet metal edge-rolling machine for 0.-0.8MM steel, can be bent 17-163MM Bends
Asin: B0C9YDDNS7 | Model: 4-lun | PartNumber: 4-lun
√ Quality Construction: Sheet Rolling Machine Adopting High Life Bearing, It Is Easy To Move, Which Can Provide You With Comfortable Sheet Bending Hand Feeling, And It Is Both Labour-Saving And Easy To Move. Six Solid Steel Columns With Upgraded Solid Structure, High Hardness And Durability. The Connection Between The Solid Steel Column And The Machine Is Made Of High Quality Stainless Steel Sleeve, Which Is Not Easy To Be Deformed And Rusted With A Higher Life Span Than Other Copper Sleeves..
√Quick Bearings: Three-Station Edge Roller Is Equipped With 6 Quick Bearings On Both Sides And 4 V-Groove Bearings On The Top End The Steel/Alum.
√ Accurate Depth Gauge: In The Metal Bender Central Roll Station On The Three Legs Have A Precise Metric Depth Gauge. When Locked In The Desired Position, You Can Accurately Align The Depths Of All The Roll Stations And Then Get The Exact Bend Size You Need..
√ Great Design: Three-Position Crimping Rollers Upgraded From Cylindrical Pulleys To V-Shaped Rollers, Which Can Perfectly Clamp The Material When Making The Bent Plate Material, Solving The Problem Of Easy Sliding And Error In The Manufacturing Process. Reduce The Error In The Process Of Bending, This Upgrade Greatly Improves The Problem Of Errors In The Use Of Sheet Metal Edge Rollers..
Features
- Modeling surprise: Three-Station Edge Roller's modeling is a new industrial new style, the appearance of special, sheet metal block design has a surprise heat dissipation effect to increase the sense of three-dimensional, V-slot bearing pressure block to enhance the architecture focus on industrial style, beautiful appearance and powerful features will give you a happy trip to bend the board
- Great design: three-position crimping rollers upgraded from cylindrical pulleys to V-shaped rollers, which can perfectly clamp the material when making the bent plate material, solving the problem of easy sliding and error in the manufacturing process. Reduce the error in the process of bending, this upgrade greatly improves the problem of errors in the use of sheet metal edge rollers.
- QUALITY CONSTRUCTION: Sheet rolling machine Adopting high life bearing, it is easy to move, which can provide you with comfortable sheet bending hand feeling, and it is both labour-saving and easy to move. Six solid steel columns with upgraded solid structure, high hardness and durability. The connection between the solid steel column and the machine is made of high quality stainless steel sleeve, which is not easy to be deformed and rusted with a higher life span than other copper sleeves.
- accurate depth gauge: in the metal bender central roll station on the three legs have a precise metric depth gauge. When locked in the desired position, you can accurately align the depths of all the roll stations and then get the exact bend size you need.
- Quick Bearings: Three-Station Edge Roller is equipped with 6 quick bearings on both sides and 4 v-groove bearings on the top end The steel/alum
- See more on Amazon...
Brand: NyVoozy | Manufacturer: NyVoozy
See On Amazon #19
Three-Station Edge Roller Bender,0-90 Bending Angle Bending Metal Roofing Materials,Adjustable for Making 5/8" to 4" (16 to 102 MM) Bends in 29 to 22-Gauge Steel,Large Sheet Metal Bender
Asin: B0CTHH8LVG | Model: sheet metal bender | PartNumber: sheet metal bender
【Accurate Depth Gauge-Additional Locking Pliers】Accurate Metric Depth Gauge On One Shaft Leg Of The Center Roller Station Of Metal Edge Roller.Could Accurately Align The Depth Of All Roller Stations.We Are Also Giving Away An Additional Powerful Locking Pliers.You Can Easily Use Sheet Metal Edge Roller To Hold The Material In Place And Make Sure There Are No Errors During Bending.
【Perfect Customer Service】This Bead Roller Sheet Metal Is Mainly Used For Metal Bending And Is Perfectly Ideal For Bending, Both In Industrial Production And As A Daily Use In The Home. If There Is Any Problem In The Process Of Using It Please Contact Us In Time, We Will Provide Perfect Satisfactory Customer Service..
【All-Metal Structure Sheet Metal Tools】The Quality Manufacturing Process And All-Metal Materials Ensure That Sheet Metal Bender Has A Long Service Life Even With A Lot Of Repeated Use.The Grip Of Sheet Metal Bender Is Made Of High Quality Aluminum Alloy,The Dobladora De Metal Rollers Are Made Of Stainless Steel,And The Triple-Wing Bolt Design Is Easy To Lock.
【Save Time,Save Labor,Efficient】When You Use This Metal Roller Bender,You Only Need To Move Back And Forth Across The Material To Achieve The Sheet Metal Brake Bend Angle You Want.The Roller Bender Special Labor-Saving Structure Design Allows You To Easily Cope With A Variety Of Work,Work Very Efficiently And Easy To Use.Metal Break..
Features
- Adjustable Bending Height This tool allows for 5/8" to 4" (16 to 102 MM) bending on 29 to 22 gauge metal with rollers on both sides. Due to the excellent performance of metal bender hand tool,metal roofing tools is not only suitable for roofing materials,but also for a wide range of other metal materials.Wide range of applications
- Save Time,Save Labor,Efficient When you use this metal roller bender,you only need to move back and forth across the material to achieve the sheet metal brake bend angle you want.The roller bender special labor-saving structure design allows you to easily cope with a variety of work,work very efficiently and easy to use.metal break.
- Accurate Depth Gauge-Additional Locking Pliers Accurate Metric depth gauge on one shaft leg of the center roller station of Metal Edge Roller.could accurately align the depth of all roller stations.We are also giving away an additional powerful locking pliers.You can easily use sheet metal edge roller to hold the material in place and make sure there are no errors during bending
- All-Metal Structure Sheet Metal Tools The quality manufacturing process and all-metal materials ensure that sheet metal bender has a long service life even with a lot of repeated use.The grip of sheet metal bender is made of high quality aluminum alloy,the dobladora de metal rollers are made of stainless steel,and the triple-wing bolt design is easy to lock
- Perfect customer service This bead roller sheet metal is mainly used for metal bending and is perfectly ideal for bending, both in industrial production and as a daily use in the home. If there is any problem in the process of using it please contact us in time, we will provide perfect satisfactory customer service.
- See more on Amazon...
Brand: HONTAITUO | Manufacturer: HONTAITUO
Dimensions: 9.00 x 12.60 x 3.70 inches
See On Amazon
Looking For Something Else?
Search