Terminal Block, High Current 200A 600V Wire Terminal Strip Easy Wiring Stable Conductivity for Power Distribution (5 Position (2005))
Asin: B0CVW14R99 | Model: LBECq78gf9b16d-13 | PartNumber: LBECq78gf9b16d-13
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Pc Shell: Outer Shell Of This Terminal Block Is Made Of Pc Engineering Plastic, Transparent And Dust Proof. High Temperature Resistance, High Toughness, Not Easy To Break..
Easy Wiring: The Wiring Of The Wire Terminal Block Is Simple And Convenient, And The Screw Can Use Two Types Of Screwdriver, Slot And Two Kinds Of Screwdriver Are Universal..
Stable Performance: The Working Current Of The Terminal Strip Is 200A, The Voltage Is 600V, With Stable Conductivity And Working Performance, Is Applicable To 60‑100Mm² Wire..
Wide Application Range: Dual Row Terminal Blocks Are Widely Used In Various Industries, Such As Bridge, Lighting, Tunnel Power Distribution, Power Distribution System, Etc..
Features
- HIGH CURRENT: Screw terminal strip has thickened contacts, colored zinc screws, sufficient current, and the is coated with plating for protection.
- WIDE APPLICATION RANGE: Dual row terminal blocks are widely used in various industries, such as bridge, lighting, tunnel power distribution, power distribution system, etc.
- PC SHELL: Outer shell of this terminal block is made of PC engineering plastic, transparent and dust proof. High temperature resistance, high toughness, not easy to break.
- STABLE PERFORMANCE: The working current of the terminal strip is 200A, the voltage is 600V, with stable conductivity and working performance, is applicable to 60 100mm wire.
- EASY WIRING: The wiring of the wire terminal block is simple and convenient, and the screw can use two types of screwdriver, slot and two kinds of screwdriver are universal.
- See more on Amazon...
Brand: VINGVO | Manufacturer: Generic
See On Amazon Similar To Terminal Block High Current 200A
#1
RED WOLF 40 AMP Car Circuit Breaker w/Manual Reset Switch Inline Fuse Holder Inverter for Motor Trolling Vehicles Audio Radio Solar System Protection 12V-48V DC with Wire Lugs Copper Washer Screws
Asin: B0BRV89YBZ
Straightforward To Install. 40A Dc 12V - 48V. Car Audio Inline Breaker Circuit Fuse 40A,Use In Place Of An Inline Fuse Holder. The Circuit Breaker Can Be Mounted On Panel Or Firewall..
Professional Material: The Screw Inside Is Made Of Pure Copper. It Is Also Water Resistant (Ip67). Use The Waterproof Cover To Better Prevent Rust From Metal Parts..
Application: Used In Auxiliary And Accessory Circuits For Fit To Boat Marine Rv Yacht Battery Trailer Bus Truck Atv Winches Applications. Also Used In Battery Charges And Dc Sound Amplifier System..
Suitable For A Wide Range Of Dc System Voltages From 12V To 48V. Designed To Protect The System From Over-Current As A Result Of High Power Draw, Short-Circuits, Wiring Mistakes, Equipment Faults Or Any Other High Current Event.With Mount Cover Protective The Stud To Be Isolated, Splash&Dust Proof..
Features
- Manual reset. Visible reset lever shows open condition, unique push button reset Can also be used as a kill switch. Button on circuit breaker can act as a master disconnect for circuits.
- Suitable for a wide range of DC system voltages from 12V to 48V. Designed to protect the system from over-current as a result of high power draw, short-circuits, wiring mistakes, equipment faults or any other high current event.With mount cover protective the stud to be isolated, splash&dust proof.
- Straightforward to install. 40A DC 12V - 48V. Car Audio Inline Breaker Circuit Fuse 40A,use in place of an inline fuse holder. The circuit breaker can be mounted on panel or firewall.
- Application: used in auxiliary and accessory circuits for fit to Boat Marine RV Yacht Battery Trailer Bus Truck ATV Winches applications. Also used in battery charges and DC sound amplifier system.
- Professional material: The screw inside is made of pure copper. It is also water resistant (IP67). Use the waterproof cover to better prevent rust from metal parts.
- See more on Amazon...
Brand: RED WOLF | Manufacturer: RED WOLF
Dimensions: 0.75 x 3.90 x 2.70 Inches
See On Amazon #2
Seamaka (Red+Black) Power Distribution Terminal Block with Cover with 6 x 1/4 (M6) Post,Battery 12V Bus Bar with Ring Terminals for Car Boat Marine O-078
Asin: B0BK8D3C2K | Model: O-078 | PartNumber: O-078
Parameters: Maximum Voltage: 300 V Ac, 48 V Dc, Maximum Continuous Current: 130 A Ac, 150 A Dc..
Package: A Red Battery Bus Bar, A Black Battery Bus Bar And 6 Terminals..
Scope Of Application: Suitable For Automobiles, Automobiles, Trucks, Ships, Boats, Yachts, Etc..
Product Features: Brass Plate And Stainless Steel Terminals As Conductors Have Low Resistance, Conductivity And Corrosion Resistance..
Features
- Material: The base is made of hard plastic, durable, and the protective cover is made of PC to prevent accidental electrical short circuit.
- Product features: brass plate and stainless steel terminals as conductors have low resistance, conductivity and corrosion resistance.
- Parameters: maximum voltage: 300 V AC, 48 V DC, maximum continuous current: 130 A AC, 150 A DC.
- Scope of application: suitable for automobiles, automobiles, trucks, ships, boats, yachts, etc.
- Package: A red battery bus bar, a black battery bus bar and 6 terminals.
- See more on Amazon...
Brand: Seamaka | Manufacturer: Seamaka
See On Amazon #3
MILAPEAK 10pcs (5 Sets) 6 Positions Dual Row 600V 25A Screw Terminal Strip Blocks with Cover + 400V 25A 6 Positions Pre-Insulated Terminals Barrier Strip (Black & Red)
Asin: B07CLY5N9T | Model: MP-T003-04-068 | PartNumber: MP-T003-04-068
★【Protect Cover】- Our Dual Row Screw Terminal Strips That Also Include A Clear Cover To Protect Accidental Touching Of The Terminal. It Will Be More Safer When The Terminals Are Protected By Snap-In Plastic "Lids". Be Careful When Mounting These Covers..
★【What You Get】- 5 X 600V 25A 6 Positions Dual Row Screw Terminal Strips, 5 X 400V 25A 6 Positions Pre-Insulated Barrier Strips (Red: 2, Black: 3), Our Worry-Free 12-Month And Friendly Customer Service. Also Available 12 Gauge,14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge High Performance Silicone Wire In Our Store..
★【Easy Install】- The Terminal Strips Are Easy To Install And Held In Place By Two Screw Holes At Either End Of The Terminal. Standard Spade Crimp Type Connectors Work Well And You Have The Option Of Of Making 6 Individual Connections Or By Using The Whole Barrier Bar Or Part Of It Up To 6 Connections To A Single Line. Once The Connections Have Been Made, Clear Plastic Covers Are Included That Push Lock Into Place To Protect The Terminals..
★【Heavy Duty】- Our Terminal/Barrier Strips Are Well Made Sturdy And With Quality And Robust Screws. You Can Crank Down On These For A Firm Bite. These Allowed You To Connect Each Power Wire Very Cleanly To Each Source (Ground, Battery, And Ignition On). Great For Compact Wiring Jobs..
Features
- Clean Installation - How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.
- Heavy Duty - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.
- Protect Cover - Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic lids. Be careful when mounting these covers.
- Easy Install - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making 6 individual connections or by using the whole barrier bar or part of it up to 6 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.
- What You Get - 5 x 600V 25A 6 Positions Dual Row Screw Terminal Strips, 5 x 400V 25A 6 Positions Pre-Insulated Barrier Strips (Red: 2, Black: 3), our worry-free 12-month and friendly customer service. Also available 12 gauge,14 gauge, 16 gauge, 18 gauge, 20 gauge High Performance Silicone Wire in our store.
- See more on Amazon...
Brand: MILAPEAK | Manufacturer: MILAPEAK
Dimensions: 0.71 x 5.98 x 4.53 inches
See On Amazon #4
4 Post Power Distribution Block Bus Bar with Cover - Made in The USA - 250 Amp Rating - Marine, Automotive, and Solar Wiring - Set of 2 (5/16")
Asin: B07THLYYH3
Anti-Corrosive & Even Consistent Flow - Our Bus Bars 12V Are Anti-Corrosive And Constructed To Handle High Currents. The Nickel-Plated Brass Contact Plate Ensures Even And Consistent Flow And Stability.
Secure And Safe Connections - With Each Bus Bar You Can Safely Wire Up To 4 Accessories. Each Marine-Quality Bus Bar Terminal Block Includes A Cover To Protect Connections From Damage And Corrosion.
Keep Your Wires Neatly Organized - With These Power Distribution Blocks, You Can Finally Organize Your Wiring, So It Doesn't Look Like A Rat’S Nest Under The Hood Anymore. Each Power Distribution Bar Measures A Little More Than 6.5" End To End At The Base, 5.7" Wide With The Cover Attached, And Slightly More Than 2" Tall Making It Possible To Mount In Virtually Any Application.
Includes Both Red And Black Connectors - With This 2 Pack Of 4 Post Power Distribution Blocks, You Will Have Plenty Of Connection Points For Both Positive And Negative Wiring Terminals With 5/16" Holes. The 4-Way Bus Wiring Block Will Make Setting Up Your Electrical Systems Quick, Neat, And Easy.
Features
- Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power
- Includes Both Red and Black Connectors - With this 2 pack of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 5/16 holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy
- Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability
- Keep Your Wires Neatly Organized - With these power distribution blocks, you can finally organize your wiring, so it doesn't look like a rat s nest under the hood anymore. Each power distribution bar measures a little more than 6.5 end to end at the base, 5.7 wide with the cover attached, and slightly more than 2 tall making it possible to mount in virtually any application
- Secure and Safe Connections - With each bus bar you can safely wire up to 4 accessories. Each marine-quality bus bar terminal block includes a cover to protect connections from damage and corrosion
- See more on Amazon...
Brand: R2X Racing | Manufacturer: R2X Racing
See On Amazon #5
Weize Lithium YTX20L-BS Motorcycle Battery,Built-in Smart BMS,480CCA,12 Volt 10AH ATV,UTV,Jet Ski,4 Wheeler,Quad,Riding Lawn Mower,Tractor,Scooter LiFePO4 Powersports Battery
Asin: B0BJ6VZV8C | Model: FPL1-YTX20L-BS | PartNumber: FPL1-YTX20L-BS
Built To Last: Our 12V 10Ah Lifepo4 Batteries Featured 500+ Amps, 50,000+ Starts, And 2,000 Charge Cycles, Without Decreasing Performance. The Average Lifetime Of Lead-Acid Batteries Is About Two Years(500 Cycles) At Just 50% Discharge. This Basically Means A Lifepo4 Battery Will Last You At Least 5X Longer Life, A 20X Longer Cycle Life Longer Than A Lead-Acid Battery, Which Actually Reduces Overall Cost. It Has Cold Weather Protection Which Is Critical..
5 Year Warranty: As The No.1 Motorcycle Battery Battery Brand On Amazon, Weize's Newest Lithium Iron Motorcycle Batteries Are Guaranteed For 5 Years! We Aim For Quality Followed Up With Quality Customer Service, Amazon Doesn't Deal With The Return Of Battery-Related Products, So Please Get In Touch With The Seller Directly. The Weize Support Team Is On Standby For You..
Lightweight And Versatile: Compared To Lead-Acid Batteries, Lithium Provides Greater Energy Density And Is At Least 1/2 The Mass, It Is A Perfect Upgrade For Any 12V Deep Cycle Battery, And The Best Choice For Many Applications Such As Motorcycles, Atvs, Utvs, Pwcs, Quads, 4 Wheelers, Jet Skis, Wave Runners, Scooters, Riding Lawn Mowers, Generators And More..
Safe And Environmentally Friendly: Made From 100% Safe, Non-Toxic, Not Hazardous Energy, Weize Lifepo4 Battery Has Higher Chemical Stability, It Is Not Prone To Thermal Runaway And Will Not Overheat Or Catch On Fire Even If Punctured. You Can Safely Mount It In Any Position With No Acid In The Battery. But Please Read The User Manual Carefully Before Using It, Don't Hesitate To Call Us If You Have Any Questions About The Battery..
Automatic Bms And Maintenance-Free: The Built-In Battery Management System (Bms) Protects Your Battery From Over Charge And Discharge, Over Current, Short Circuiting, As Well As Low And High Temperature For Increased Performance And Longer Life. The Bms Will Automatically Cut Off The Battery And The Voltage Will Drop Below 1V. Only When The Circuit Is Cut Off, The Battery Will Automatically Reactivate After 1 Second(No Longer Need A Higher Voltage Input To Activate)..
Replaces 20L-Bs Etx20l Cytx20l-Bs Gtx20l-Bs Compatible With Honda Trx680 Four Trax Rincon Vtx1800 Gold Wing Gl1800 Yuam320bs (Plt-120).
Features
- YTX20L Battery Product Dimensions: 6.93"L x 3.43"W x 6.1"H; Terminal: M6: Size, cold cranking amps, terminal location, and battery type are vital pieces to getting the right unit. please measure your old battery and compare the dimensions with this battery, if the measurements are the same, positive and negative poles are consistent, CCA is no big difference, and it will fit your vehicle. Terminal Left : Negative (-), Right: Positive (+).
- Replaces 20L-BS ETX20L CYTX20L-BS GTX20L-BS Compatible with Honda TRX680 Four Trax Rincon VTX1800 Gold Wing GL1800 YUAM320BS (PLT-120)
- BUILT TO LAST: Our 12V 10Ah LiFePO4 Batteries Featured 500+ amps, 50,000+ starts, and 2,000 charge cycles, without decreasing performance. The average lifetime of lead-acid batteries is about two years(500 cycles) at just 50% discharge. This basically means a LiFePO4 battery will last you at least 5x longer life, a 20x longer cycle life longer than a lead-acid battery, which actually reduces overall cost. It has cold weather protection which is critical.
- AUTOMATIC BMS AND MAINTENANCE-FREE: The built-in Battery Management System (BMS) protects your battery from Over Charge and Discharge, Over Current, Short Circuiting, as well as Low and High Temperature for increased performance and longer life. The BMS will automatically cut off the battery and the voltage will drop below 1V. Only when the circuit is cut off, the battery will automatically reactivate after 1 second(No longer need a higher voltage input to activate).
- LIGHTWEIGHT AND VERSATILE: Compared to lead-acid batteries, lithium provides greater energy density and is at least 1/2 the mass, it is a perfect upgrade for any 12V Deep Cycle battery, and the best choice for many applications such as motorcycles, ATVs, UTVs, PWCs, quads, 4 wheelers, jet skis, wave runners, scooters, riding lawn mowers, generators and more.
- SAFE AND ENVIRONMENTALLY FRIENDLY: Made from 100% safe, non-toxic, not hazardous energy, Weize LiFePO4 battery has higher chemical stability, it is not prone to thermal runaway and will not overheat or catch on fire even if punctured. You can safely mount it in any position with no acid in the battery. But please read the user manual carefully before using it, don't hesitate to call us if you have any questions about the battery.
- 5 YEAR WARRANTY: As the No.1 Motorcycle Battery battery brand on Amazon, Weize's newest Lithium Iron Motorcycle Batteries are guaranteed for 5 years! We aim for quality followed up with quality customer service, Amazon doesn't deal with the return of battery-related products, so please get in touch with the seller directly. The weize support team is on standby for YOU.
- See more on Amazon...
Brand: WEIZE | Manufacturer: TOPAK POWER TECHNOLOGY CO., LTD.
Dimensions: 6.10 x 6.93 x 3.43 inches | Weight: 5.94 pounds
See On Amazon #6
Terminal Block White Screw Terminal Connector Dual Row Electric Barrier Block 12-Position Terminal Strip, 10 Amp 380 V (10)
Asin: B08NGBQWWT | Model: Weewooday-7747 | PartNumber: Weewooday-7747
Easy To Install: You Juse Need To Strip The Wires, And Insert Them Into The Terminal Strip And Tighten The Screws, No Need For Troublesome Welding; What's More, You Can Use Scissors Or Other Tools, Cut The Screw Terminal Block Become Small Parts As You Need.
Safe To Use: The Set Screws Secure Wires Reliable Contact, And Help Prevent Accidental Contact With The Terminals.
Multi-Purpose: These Dual Row Screw Terminals Can Be Applied For The Link Of Lighting Lamps, Household Appliances, Electrical Control, Power Supply, Electrical Maintenance, Electrical Machinery And More.
Crimping Performance: The Plated Zinc Alloy Screws And Copper-Plated Zinc Alloy Terminals Have Excellent Stability And Conductivity, Can Serve You For A Long Time.
Features
- Insulated flame-retardant shell: these block connectors adopt flame-retardant PP material shell, which feature with insulation, corrosion resistance and wear resistance; They can stand temperature between minus 40 to 150 degrees Celsius, have nice electrical conductivity
- Crimping performance: the plated zinc alloy screws and copper-plated zinc alloy terminals have excellent stability and conductivity, can serve you for a long time
- Easy to install: you juse need to strip the wires, and insert them into the terminal strip and tighten the screws, no need for troublesome welding; What's more, you can use scissors or other tools, cut the screw terminal block become small parts as you need
- Multi-purpose: these dual row screw terminals can be applied for the link of lighting lamps, household appliances, electrical control, power supply, electrical maintenance, electrical machinery and more
- Safe to use: the set screws secure wires reliable contact, and help prevent accidental contact with the terminals
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #7
OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC
Asin: B08TBXQ7H6 | Model: D-1410 | PartNumber: D-1410 | Ean: 6954525591793
A / B Terminal Blocks, Pitch 7.5Mm/0.295", Wire Range 26Awg ~ 12Awg / 2.5Mm Square. Rated Current 16Amp. Strip Length 7Mm. Screws - M3,Steel, Cr3+ Zn Plated. Pin Header And Cage - Brass..
Ul Ce Cqc Certified Terminal Blocks, Fr-4 Glass Fiber Pcb..
A1~B6 / A7~B12 Terminal Blocks, Pitch 5.0Mm/0.197", Wire Range 26Awg ~ 12Awg / 2.5Mm Square. Rated Current 16Amp. Strip Length 7Mm. Screws - M3,Steel, Cr3+ Zn Plated. Pin Header And Cage - Brass..
Rated Current 16 Amp(Total Input Or Output), Maximum Voltage 48V.
Features
- 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.
- Rated current 16 Amp(total input or output), Maximum voltage 48V
- A / B terminal blocks, Pitch 7.5mm/0.295, Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
- A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197, Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
- UL CE CQC certified terminal blocks, FR-4 glass fiber PCB.
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
Dimensions: 22.00 x 97.00 x 97.00 inches
See On Amazon #8
Joinfworld 35A Terminal Block 12 Position Screw Terminal Strip Dual Row with Cover and 12 Position Pre-Insulated Terminal Jumper Block - 2pcs
Asin: B0BN55WVDB | Model: TB-3512 | PartNumber: TB-3512
Easy To Install - There Are Two Screw Holes On Each Side Of The Terminal Block. You Only Need To Fix Them With Screws And Connect Cables. Terminal Strips Greatly Simplify And Tidy Up Your Installation..
Versatile Terminal Blocks Set - 2Pcs X 35A 12 Position Terminal Strip, 2Pcs X Pre-Insulated Terminal Jumper Block (Red&Black). This Terminal Blocks Come With Suitable Pre-Insulated Jumper Block To Meet Different Needs, Easy To Install And Remove. For Any Problems, Please Do Not Hesitate To Write To Us..
Protect Cover - Each Marine Wire Terminal Block Comes With A Cover, Which Will Shelter Most Exposed Contact Areas To Reduce The Risks Of Causing Short Circuit Or Accidental Touching..
35A Larger Amerpage Rating - The Rating Of This Terminal Strip Is 600V 35A, Which Makes It Can Handle A Wider Range Of Using Scenarios Compared With Others..
Features
- Sturdy Material - This 12 Position Terminal Block is made of PC material shell, high toughness and not easy to break, transparent plastic protective cover, dust-proof and scratch-proof protection wire connector.
- 35A Larger Amerpage Rating - The rating of this terminal strip is 600V 35A, which makes it can handle a wider range of using scenarios compared with others.
- Easy to Install - There are two screw holes on each side of the terminal block. You only need to fix them with screws and connect cables. Terminal strips greatly simplify and tidy up your installation.
- Protect Cover - Each marine wire terminal block comes with a cover, which will shelter most exposed contact areas to reduce the risks of causing short circuit or accidental touching.
- Versatile Terminal Blocks Set - 2pcs x 35A 12 Position Terminal Strip, 2pcs x Pre-Insulated Terminal Jumper Block (Red&Black). This terminal blocks come with suitable pre-insulated jumper block to meet different needs, easy to install and remove. For any problems, please do not hesitate to write to us.
- See more on Amazon...
Brand: Joinfworld | Manufacturer: Joinfworld
Dimensions: 2.00 x 7.00 x 5.00 inches
Warranty: 1 YEAR
See On Amazon #9
mxuteuk 3pcs Aluminum DIN Rails,4 Inches Long,35mm Wide,7.5mm High DIN Rail with RoHS for Hardware Components Mounting MXU-DIN-100
Asin: B07RFQGVXG | Model: MXU-DIN-100 | PartNumber: MXU-DIN-100 | Ean: 0741416012002 | UPC: 741416012002
Easy To Install : Practical Design With Screws For Easy Installation.
Package Contents: 3Pcs X Din Rails + 6Pcs X Screws.
Height : 7.5Mm/ 0.29" ; Length : 100Mm/ 4"(-1%) (For Easy Installation) ; Width : 35Mm/ 1.38" ; Color : Silver Tone.
Versatility : Perfect For Any Type Of Electronic Component Or Device, Such As Relays, Contactors, Breakers And More.
Features
- Multipurpose : Can be installed in all types of terminal boxes, distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery and equipment.
- Versatility : Perfect for any type of electronic component or device, such as relays, contactors, breakers and more
- Easy to install : Practical design with screws for easy installation
- Height : 7.5mm/ 0.29 ; Length : 100mm/ 4(-1%) (For easy installation) ; Width : 35mm/ 1.38 ; Color : Silver Tone
- Package Contents: 3pcs x DIN rails + 6pcs x screws
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #10
Heart Horse Bus Bar Terminal Block, Power Stud Battery Junction Post 1/4" Power Distribution Block Positive Negative for Truck RV Boat, Dual Power Stud DC 48V 300A (Red & Black Set)
Asin: B07H93YXHP | Model: sku1419red+black | PartNumber: sku1419red+black | Ean: 0714046500133 | UPC: 714046500133
【Dimensions】- The Battery Junction Block Is Measured 1.77" X 1.69" X 1.26"/45Mm X 43Mm X 32Mm. Stud Size: M6 X M6 (1/4"). Maximum Amplifier Per Circuit: Determined By The Connected Wires.Maximum Working Voltage: Dc 48V & Up To 300 Amp. Note: Please Be Gentle When Tightening Or The Nut Threads Will Strip Out..
【Function】- Bus Bar Stud Terminal Block Allow Terminating Of Heavy-Duty Cables For One Or More Connections. Red And Black Color Allowing Easy And Clear Color Coding For Wiring..
【Easy To Mount】- Junction Post's Surface Screw Fixed Installation, Two Mounting Holes Make This Terminal Block Easier To Be Mounted In Any Orientation..
【High Quality】- Dual 1/4" Stainless Steel Power Stud, Lock Washer, And Nut, Which Is Sturdy And Rust-Resistant. The Base Is Made Of Flame Retardant Plastic To Protect Your Safety, Ensures Great Mechanical Strength And Durability..
Features
- Wide Applications - The positive and negative power distribution block is useful for customizing vehicles or relocating batteries. Applicable to 12-48V trucks, RVs, boats,Trailers and other industrial equipment.
- High Quality - Dual 1/4 stainless steel power stud, lock washer, and nut, which is sturdy and rust-resistant. The base is made of flame retardant plastic to protect your safety, ensures great mechanical strength and durability.
- Dimensions - The battery junction block is measured 1.77 x 1.69 x 1.26/45mm x 43mm x 32mm. Stud size: M6 x M6 (1/4). Maximum amplifier per circuit: determined by the connected wires.Maximum working voltage: DC 48V & up to 300 Amp. Note: Please be gentle when tightening or the nut threads will strip out.
- Easy to Mount - Junction Post's surface screw fixed installation, two mounting holes make this terminal block easier to be mounted in any orientation.
- Function - Bus bar stud terminal block allow terminating of heavy-duty cables for one or more connections. Red and Black color allowing easy and clear color coding for wiring.
- See more on Amazon...
Brand: Heart Horse | Manufacturer: Heart Horse
See On Amazon
Looking For Something Else?
Search