uxcell Aluminum Plum Shaft Coupling 6mm to 6mm Bore L25xD20 Flexible Coupler Joint for Machine and Servo Stepped Motor Pack of 1
Asin: B0CVX2R494
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Jaw Coupling Has Three Parts: Two Metallic Hubs And An Elastomer Insert. The Two Fixed Ends Are Made Of Hard Aluminum Alloy And The Middle Is Made Of Polyurethane Elastomer. You Need To Fit The Three Parts Together With The Jaw Lock..
The Flexible Coupler Joint Is Wear-Resistant, High Hardness And Excellent Response. Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Due To The Limitation In The Shaft Misalignment, Please Check Your Shaft Misalignment. Too Much Angular Or Parallel Misalignment Will Result In Bearing Loads That May Lead To Premature System Wear Or Failure..
Package Content：1 X Flexible Shaft Coupler;Color: Silver, Red;Material: Aluminum;Connection Diameter: 6Mm To 6Mm/0.24 To 0.24Inch;Total Length: 25Mm/0.98Inch;Outside Diameter: 20Mm/0.79Inch.
Features
- General-purpose power transmission coupling, also used in motion control applications and rotational power transmissions. Widely used in servo stepped motor, 3D printer, CNC, and encoder motor.
- Package Content 1 x Flexible Shaft Coupler;Color: Silver, Red;Material: Aluminum;Connection Diameter: 6mm to 6mm/0.24 to 0.24inch;Total Length: 25mm/0.98inch;Outside Diameter: 20mm/0.79inch
- The jaw coupling has three parts: two metallic hubs and an elastomer insert. The two fixed ends are made of hard aluminum alloy and the middle is made of polyurethane elastomer. You need to fit the three parts together with the jaw lock.
- Due to the limitation in the shaft misalignment, please check your shaft misalignment. Too much angular or parallel misalignment will result in bearing loads that may lead to premature system wear or failure.
- The Flexible Coupler Joint is wear-resistant, high hardness and excellent response. Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell Aluminum Plum Shaft Coupling
#1
uxcell 10mm to 14mm Shaft Plum Shaped Coupling Coupler 30mm Diameter 35mm Length
Asin: B078VS9BVH | Model: a17110100ux0232 | PartNumber: a17110100ux0232
Size: 35 X 30Mm/ 1.38 X 1.17 Inch( L*D); Main Color: Silver Tone,Red.
The Shaft Couplers Are Mainly Used For Servo Motors, Spindle, Step Motor Etc..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy, Polyurethane; Type: Plum Shaped.
Features
- Shaft Usage: 10mm to 14mm / 0.39inch to 0.55 inch
- Material: Aluminum alloy, polyurethane; Type: Plum shaped
- Size: 35 x 30mm/ 1.38 x 1.17 inch( L*D); Main Color: Silver tone,Red
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are mainly used for servo motors, spindle, step motor etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.91 x 3.94 inches
See On Amazon #2
uxcell 12.7mm to 15mm Shaft Coupling 45mm Length 32mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9VTJ2B | Model: SYNCE007192 | PartNumber: SYNCE007192
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 45X32mm/ 1.77X1.26Inch( L*D).
Features
- Shaft Usage: 12.7mm to 15mm / 0.5 to 0.59 inch
- Material: Aluminum alloy; Size: 45x32mm/ 1.77x1.26inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.18 pounds
See On Amazon #3
uxcell 12.7mm to 14mm Shaft Coupling 45mm Length 32mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9WD8RF | Model: SYNCE007196 | PartNumber: SYNCE007196
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 45X32mm/ 1.77X1.26Inch( L*D).
Features
- Shaft Usage: 12.7mm to 14mm / 0.5 to 0.55 inch
- Material: Aluminum alloy; Size: 45x32mm/ 1.77x1.26inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.97 Inches
See On Amazon #4
uxcell 4mm to 6mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue,2pcs
Asin: B07P6XB62M
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 4mm to 6mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 Inches
See On Amazon #5
uxcell 11mm to 8mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L30xD25 Silver
Asin: B09BZBTNG9
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 1 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 11mm to 8mm ; Total Length: 30mm /1.2 inch; Outside Diameter : 25mm/ 0.98 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 1 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 10mm to 5mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L30xD25 Silver 2Pcs
Asin: B09BZBW57N
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 1 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 10mm to 5mm ; Total Length: 30mm /1.2 inch; Outside Diameter : 25mm/ 0.98 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 1 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 5mm to 6.35mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,5pcs
Asin: B091377YBK | Model: 1129YOE4TNO | PartNumber: 1129YOE4TNO
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 5 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 5mm to 6.35mm; Total Length: 25mm /0.98 inch; Outside Diameter : 19mm/ 0.75 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 5 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 5 Pcs 8mm to 5mm Aluminum Alloy Shaft Coupling Flexible Coupler L25xD20 Golden Tone
Asin: B095N87FMJ | Model: a21011400ux0103 | PartNumber: a21011400ux0103
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 5 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 8mm to 5mm; Total Length: 25mm /0.98 inch; Outside Diameter : 20mm/ 0.78 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 5 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 5mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,4pcs
Asin: B08H8MX9L3
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 5mm to 8mm; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 2mm to 6mm Bore Rigid Coupling Set Screw L20XD12 Aluminum Alloy,Shaft Coupler Connector for RC Airplane Boat, Motor Accessories,Red,2pcs
Asin: B07PBBMD3C
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 2mm to 6mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #11
uxcell 2mm to 4mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories
Asin: B07P5Z1YP9 | Model: a18122800ux0570 | PartNumber: a18122800ux0570
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 2mm to 4mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #12
uxcell 6.35mm to 6.35mm Shaft Coupling 40mm Length 25mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9WD8RH | Model: SYNCE007197 | PartNumber: SYNCE007197
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 40X25mm/ 1.57X0.98Inch( L*D).
Features
- Shaft Usage: 6.35mm to 6.35mm / 0.25 to 0.25 inch
- Material: Aluminum alloy; Size: 40x25mm/ 1.57x0.98inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 8mm to 10mm Shaft Coupling 30mm Length 25mm Diameter Motor Coupler Aluminum Alloy Joint Connector for DIY Encoder
Asin: B06X9XSNQ2 | Model: US-SA-AJD-303755 | PartNumber: US-SA-AJD-303755
Size: 30X25mm/ 1.18X0.98Inch( L*D); Main Color: Silver Tone, Red.
The Shaft Couplers Are Mainly Used For Servo Motors, Spindle, Step Motor Etc..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy, Polyurethane; Type: Plum Shaped.
Features
- Shaft Usage: 8mm to 10mm / 0.31 to 0.39 inch
- Material: Aluminum alloy, polyurethane; Type: Plum shaped
- Size: 30x25mm/ 1.18x0.98inch( L*D); Main Color: Silver tone, red
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are mainly used for servo motors, spindle, step motor etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.97 inches
See On Amazon #14
uxcell RC Airplane 2mm to 3mm Brass Motor Coupling Shaft Coupler Connector
Asin: B00OK6EBZK | Model: a14062000ux0834 | PartNumber: a14062000ux0834 | Ean: 0702105592410 | UPC: 702105592410
Main Color : Gold Tone;Material : Brass.
Package Content : 1 X Motor Shaft Coupling4 X Install Screws.
Weight : 5G.
Total Size : 2 X 0.9Cm/0.79" X 0.35"(L*D);Thread Dia : 3Mm/0.12".
Features
- Product Name : Motor Shaft Coupling;Type(Inner Hole Dia) : 2mm to 3mm/0.08" to 0.12"
- Total Size : 2 x 0.9cm/0.79 x 0.35(L*D);Thread Dia : 3mm/0.12
- Main Color : Gold Tone;Material : Brass
- Weight : 5g
- Package Content : 1 x Motor Shaft Coupling4 x Install Screws
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 4.33 x 3.94 Inches | Weight: 0.22 pounds
See On Amazon #15
uxcell Hex Coupler 4mm Bore Motor Hex Brass Shaft Coupling Flexible Connector for Car Wheels Tires Shaft Motor 8pcs
Asin: B08M3Z2N8B
【Material:】- Made Of Brass, Sturdy, Reliable And Strictly Functional. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
【Package Content】- 8Pcs Hex Coupler, 16Pcs M4 Screws, 2Pcs 4Mm Hex Wrench..
【Function】- A Special Coupler, Used For Connecting The Motor Shaft And The Hexagon Wheel Of The Robot And Other Models..
【Coupling Size】- Hex Height : 6Mm ; Opposite Side: 12Mm ; Cylinder Height: 12Mm ; Cylinder Outer Diameter: 11.5Mm ; Cylinder Inner Diameter: 4Mm ; Fastening Screw Hole: M4.
Features
- Type - 4mm Hex Brass Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Coupling Size - Hex Height : 6mm ; Opposite Side: 12mm ; Cylinder Height: 12mm ; Cylinder Outer Diameter: 11.5mm ; Cylinder Inner Diameter: 4mm ; Fastening Screw Hole: M4
- Material: - Made of brass, sturdy, reliable and strictly functional. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function - A special coupler, used for connecting the motor shaft and the hexagon wheel of the robot and other models.
- Package Content - 8pcs Hex Coupler, 16pcs M4 Screws, 2pcs 4mm Hex Wrench.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 12mm to 19mm Shaft Plum Shaped Coupling Coupler 40mm Diameter 55mm Length Without Through Hole
Asin: B078VV4H8D | Model: a17110100ux0239 | PartNumber: a17110100ux0239
Size: 55 X 40Mm/ 2.16 X 1.57 Inch( L*D); Main Color: Silver Tone,Red.
The Shaft Couplers Are Mainly Used For Servo Motors, Spindle, Step Motor Etc..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy, Polyurethane; Type: Plum Shaped.
Features
- Bore Diameter: 12mm to 19mm/ 0.47inch to 0.74inch
- Material: Aluminum alloy, polyurethane; Type: Plum shaped
- Size: 55 x 40mm/ 2.16 x 1.57 inch( L*D); Main Color: Silver tone,Red
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are mainly used for servo motors, spindle, step motor etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.91 x 3.94 inches
See On Amazon #17
uxcell Aluminum Plum Shaft Coupling 6.35mm to 10mm Bore L30xD25 Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor Pack of 2
Asin: B0CTH7NSF5
The Jaw Coupling Has Three Parts: Two Metallic Hubs And An Elastomer Insert. The Two Fixed Ends Are Made Of Hard Aluminum Alloy And The Middle Is Made Of Polyurethane Elastomer. You Need To Fit The Three Parts Together With The Jaw Lock..
Wear-Resistant, High Hardness And Excellent Response. Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Due To The Limitation In The Shaft Misalignment, Please Check Your Shaft Misalignment. Too Much Angular Or Parallel Misalignment Will Result In Bearing Loads That May Lead To Premature System Wear Or Failure..
Package Content：2 X Flexible Shaft Couplers;Color: Silver, Red;Material: Aluminum;Connection Diameter: 6.35 To 10Mm/0.25 To 0.39Inch;Total Length: 30Mm/1.18Inch;Outside Diameter : 25Mm/0.98Inch;Attachment:Inner Hex Wrench..
Features
- General-purpose power transmission coupling, also used in motion control applications and rotational power transmissions. Widely used in servo stepped motor, 3D printer, CNC, and encoder motor.
- Package Content 2 x Flexible Shaft Couplers;Color: Silver, Red;Material: Aluminum;Connection Diameter: 6.35 to 10mm/0.25 to 0.39inch;Total Length: 30mm/1.18inch;Outside Diameter : 25mm/0.98inch;Attachment:Inner Hex Wrench.
- The jaw coupling has three parts: two metallic hubs and an elastomer insert. The two fixed ends are made of hard aluminum alloy and the middle is made of polyurethane elastomer. You need to fit the three parts together with the jaw lock.
- Due to the limitation in the shaft misalignment, please check your shaft misalignment. Too much angular or parallel misalignment will result in bearing loads that may lead to premature system wear or failure.
- Wear-resistant, high hardness and excellent response. Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L25XD20 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,4pcs
Asin: B08H24D7BR
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 5mm to 5mm; Total Length: 25mm/0.98 inch, Outside Diameter: 20mm/0.78 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 8mm to 9mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,5pcs
Asin: B091371B4N | Model: a20112600ux0087 | PartNumber: a20112600ux0087
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 1 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 8mm to 9mm; Total Length: 25mm /0.98 inch; Outside Diameter : 19mm/ 0.75 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 1 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 3mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue
Asin: B08H25BZHM
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 3mm to 8mm; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search