Hubceuo ASA Circuit Board Online Repair Tester Dual-Channel VI Curve Tester 4 Voltage 4 Frequency
Asin: B0CW2VMM5X | Ean: 4713295318816
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.4. Vi And Multimeter Resistance Type, But The Multimeter Resistance Voltage Is Low, And This Instrument Uses Ac Signal To Excite Circuit Nodes. Because The Amplitude And Frequency Are Adjustable, The Amplitude Close To The Working Voltage Can Be Used To Excite, And The Measured Graph Is More Real..
5. The Fault Node Can Be Found Through Comparison. Due To The Limited Current Applied To The Components, This Technology Will Not Affect Or Damage Any Components. Asa Has Many Advantages, And It Has Been Proved To Be A Fast And Effective Fault Diagnosis Technology..
Description: 1. Vi Curve Analysis, Also Known As Asa, Does Not Involve Circuit Principle And Does Not Require The Circuit To Be In Working State, So It Can Be Used For Fault Detection Of Circuit Boards That Are Separated From Equipment (Without Online Detection) Without Drawing Data; It Is Absolutely Forbidden To Carry Out Electrification And Measure The Undischarged Capacitance. Since The Circuit Board Does Not Need To Be Powered, The Circuit Board Is Relatively ..
3. As A Single Device Can Be Regarded As The Simplest Circuit Board, Asa Technology Can Also Be Used To Detect The Quality Of Large-Scale, Complex Or Unknown Integrated Devices. In Fact, Due To Limited Conditions, Asa Is The Only Way For Many Users To Detect Such Devices. In Addition, Asa Is Convenient And Intuitive When It Is Used To Detect The Function Of Discrete Components..
Features
- 2. It does not involve the functions of the devices on the circuit board, so no matter what type of devices the circuit is composed of, digital, analog, digital analog mixed, functional known, unknown (such as dedicated, programmable), etc., it can be tested; It is tested by circuit node (device pin), and is basically not limited by the packaging of components on the circuit board.
- 3. As a single device can be regarded as the simplest circuit board, ASA technology can also be used to detect the quality of large-scale, complex or unknown integrated devices. In fact, due to limited conditions, ASA is the only way for many users to detect such devices. In addition, ASA is convenient and intuitive when it is used to detect the function of discrete components.
- 4. VI and multimeter resistance type, but the multimeter resistance voltage is low, and this instrument uses AC signal to excite circuit nodes. Because the amplitude and frequency are adjustable, the amplitude close to the working voltage can be used to excite, and the measured graph is more real.
- Description: 1. VI curve analysis, also known as ASA, does not involve circuit principle and does not require the circuit to be in working state, so it can be used for fault detection of circuit boards that are separated from equipment (without online detection) without drawing data; It is absolutely forbidden to carry out electrification and measure the undischarged capacitance. Since the circuit board does not need to be powered, the circuit board is relatively .
- 5. The fault node can be found through comparison. Due to the limited current applied to the components, this technology will not affect or damage any components. ASA has many advantages, and it has been proved to be a fast and effective fault diagnosis technology.
- See more on Amazon...
Brand: Hubceuo | Manufacturer: Hubceuo
Dimensions: 2.76 x 7.48 x 4.33 inches | Weight: 0.87 pounds
See On Amazon Similar To Hubceuo ASA Circuit Board Online
#1
Chanzon 20 Pcs Double Sided PCB Board (4 Sizes - 2X8 3X7 4X6 5X7) Tinned Through Holes FR4 Prototype Kit Printed Circuit Universal Perfboard for DIY Soldering Project Compatible with Arduino Kits
Asin: B07LF78ZY3 | Model: 20PCB-LYB--KIT2 | PartNumber: 20PCB-LYB--KIT2
Kits : 20Pcs Set ( 5Pcs 4X6 / 5Pcs 3X7 / 5Pcs 5X7 / 5Pcs 2X8 ) 2*8 3*7 4*6 5*7 Cm Protoboard | Hole-Diameter: 1 Mm / 0.04 Inches | Hole-Pitch Point: 2.54Mm / 0.1 Inches | Conner Mounting-Hole: 2 Mm / 0.08 Inch | Thickness: 1.6Mm / 0.06 Inch 5Pcs 4 X 6Cm Double-Sided Pcb Board With 280 Holes 5Pcs 3 X 7Cm Double-Sided Pcb Board With 240 Holes 5Pcs 5 X 7Cm Double-Sided Pcb Board With 432 Holes 5Pcs 2 X 8Cm Double-Sided Pcb Board With 168 Holes.
Warranty And Customer Service - We Provide 1 Year Warranty For This Pcs Circuits Boards, Our Customer Service Team Is Ready For Income Request 24X7..
Work With: Led Diode, Screw Terminal, Dupont Wire, Connector, Resistor, Ic, Dip, Sensors, Transistor And Other Eletronic Power Components Or Devices With .1" Pin Spacing. For Hobby Test, Computer Science Class,Raspberry Rasp Pi Connection Perf Board.Widely Used Among Electronic Experiments And Point-To-Point Diy Iot Projects..
Lettering On Both Side Of The Pc Board Makes It Easier For Prototyping Projects, Cuttable Fiber Glass And Fr-4 Flame Resistant Good For Soldering,Muti Pins, Easy To Cut And Solder With Appropriate Tools. Flux For Easy Soldering And Extended Serving Life Of Printed Blank Perforated Board. Pre-Tined Plating Thru Holes.
Features
- These double side (DS) pcbs with plated through holes design, Each hole on the same side are electrically isolated (NOT a stripboard or sigle side) solderable, You can solder to bridging holes together or use 22-29awg jumper wires for connection. Isolate points bare perfboard.
- Lettering on both side of the PC board makes it easier for prototyping projects, Cuttable fiber glass and FR-4 flame resistant good for soldering,Muti Pins, easy to cut and solder with appropriate tools. Flux for easy soldering and extended serving life of printed blank perforated board. Pre-tined plating thru holes
- Kits : 20pcs set ( 5pcs 4x6 / 5pcs 3x7 / 5pcs 5x7 / 5pcs 2x8 ) 2*8 3*7 4*6 5*7 CM protoboard | Hole-diameter: 1 mm / 0.04 inches | Hole-pitch point: 2.54mm / 0.1 inches | Conner Mounting-Hole: 2 mm / 0.08 inch | Thickness: 1.6mm / 0.06 inch 5pcs 4 X 6CM double-sided PCB board with 280 holes 5pcs 3 X 7CM double-sided PCB board with 240 holes 5pcs 5 X 7CM double-sided PCB board with 432 holes 5pcs 2 X 8CM double-sided PCB board with 168 holes
- Work with: led diode, screw terminal, dupont wire, connector, resistor, IC, DIP, sensors, transistor and other eletronic power components or devices with .1 pin spacing. For Hobby Test, Computer Science Class,Raspberry rasp Pi connection Perf Board.widely used among electronic experiments and point-to-point DIY IoT projects.
- WARRANTY AND CUSTOMER SERVICE - We provide 1 year warranty for this pcs circuits boards, Our Customer service team is ready for income request 24x7.
- See more on Amazon...
Brand: CHANZON | Manufacturer: CHANZON
Dimensions: 0.71 x 6.30 x 5.51 inches | Weight: 0.31 Pounds
See On Amazon #2
Hubceuo Dual-Channel VI Curve Tester Circuit Board Online Detection ASA Tester Dual-Channel VI Curve Tester
Asin: B0CXDBPGQL | Ean: 4711643076432
Oscilloscope Parameter Setting: Adjust The Oscilloscope To X-Y Mode(Different Oscilloscopes Have Different Adjustment Methods, Please Explore By Yourself). Adjust The Vertical Parameters Of The 2 Channels Of X Y To 1V/, And Only One Of The Single-Track Oscilloscopes Needs To Be Adjusted..
After The Connection Is Correct, The Oscilloscope Will Display A Horizontal Line. If A Vertical Line Is Displayed, The Xy Plug Will Be Reversed. Adjust The Vertical And Horizontal Parameters, The Horizontal And Vertical Lines Are In The Display Box..
4 Test Frequencies, Can Be Used When Connected To An Oscilloscope, Both Analog Oscilloscopes And Digital; Oscilloscopes Can Be Used; Dual Signal Input, Alternating Display; 4-Gear Frequency, Alternating Speed Adjustable; One Click On Single Channel / Alternating Display.
The Analog Oscilloscope Does Not Need To Adjust The Time Base, The Digital Oscilloscope Time Base Is Adjusted Between 1-5Ms.
Features
- HOW TO USE:
- The analog oscilloscope does not need to adjust the time base, the digital oscilloscope time base is adjusted between 1-5ms
- Oscilloscope parameter setting: Adjust the oscilloscope to X-Y mode(different oscilloscopes have different adjustment methods, please explore by yourself). Adjust the vertical parameters of the 2 channels of X Y to 1V/, and only one of the single-track oscilloscopes needs to be adjusted.
- 4 test frequencies, can be used when connected to an oscilloscope, both analog oscilloscopes and digital; oscilloscopes can be used; Dual signal input, alternating display; 4-gear frequency, alternating speed adjustable; One click on single channel / alternating display
- After the connection is correct, the oscilloscope will display a horizontal line. If a vertical line is displayed, the xY plug will be reversed. Adjust the vertical and horizontal parameters, the horizontal and vertical lines are in the display box.
- See more on Amazon...
Brand: Hubceuo | Manufacturer: Hubceuo
Dimensions: 5.31 x 7.68 x 4.33 inches | Weight: 0.94 pounds
See On Amazon #3
Formax D-55005-A; Action PCB Circuit Board
Asin: B06WWDMN3M
Brand: Formax | Manufacturer: Formax
See On Amazon
Looking For Something Else?
Search