weyleity 32mm & 36mm Fan Clutch Nut Wrench Set | Water Pump Pulley Holder Removal Tool for BMW Ford GM Chevrolet Water Pump Fan Clutch Removal Tool Nut Water Hub Removal
Asin: B0CWP7Q4NR | Model: MS-0228-04 | PartNumber: MS-0228-04
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy To Use】 Attach The Pulley Holder Bar With Your Bolts Inserted Through The Holes, Lock Into Place On Water Pump Face, Place Wrench On Fan Clutch Nut And Loosen The Fan Clutch Nut By Turning Clockwise Using 32 Mm And 36 Mm Spanner To Undo Nut. If The Hole Sizes On The Tool Are Smaller Than The Bolts Holding The Pulley Wheel To The Water Pump, Remove Bolts And Reinstall Over Bar..
【Wide Application】 The Fan Clutch Nut Wrench Is Compatible With Bmw M4 M10 M20 M30 M40 M44 M50 M52 M52tu M54 M56 M60 M70 M73 S14 S38 S54 S50b30 S50b32 S54. Also Compatible With Certain Ford, Gm Mercedes And Chevrolet Models. This Is A Two-Piece Multi-Tool You'll Love, It's More Affordable And Better Quality..
【High Performance】 The Water Pump Pulley Holder Removal Tool Is Used To Disassemble Water Pump On Models With Temperature Dependent Viscosity Drive Fans, Removing Lock Nuts On The Thermo-Viscous Fans. The Water Pump Holder Removal Tool Keeps The Water Pump Pulley In Place While Loosening The Radiator Fan..
【Effortless Fan Clutch Removal】 The Fan Clutch Removal Kit Includes Two Size, 32Mm & 36Mm, Very Easy To Use. This 32Mm& 36Mm Long-Reach Wrench And Water Pump Pulley Holding Tool Make Replacing Your Water Pump Or Fan Clutch A Fast And Easy Job..
Features
- Durable and Comfort The 32mm & 36mm fan clutch nut wrench set is made of high-strength steel, with precise dimensions, which has strong hardness wear resistance and not easy to be broken or bent. There is a layer of rubber in the middle part, rust-proof and does not hurt your hands, feels more comfortable to use.
- Effortless Fan Clutch Removal The fan clutch removal kit includes two size, 32mm & 36mm, very easy to use. This 32mm& 36mm long-reach wrench and water pump pulley holding tool make replacing your water pump or fan clutch a fast and easy job.
- Easy to Use Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut and loosen the fan clutch nut by turning clockwise using 32 mm and 36 mm spanner to undo nut. If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
- High Performance The water pump pulley holder removal tool is used to disassemble water pump on models with temperature dependent viscosity drive fans, removing lock nuts on the thermo-Viscous fans. The water pump holder removal tool keeps the water pump pulley in place while loosening the radiator fan.
- Wide Application The fan clutch nut wrench is compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 S54. Also compatible with certain Ford, GM Mercedes and Chevrolet models. This is a two-piece multi-tool you'll love, it's more affordable and better quality.
- See more on Amazon...
Brand: weyleity | Manufacturer: weyleity
Weight: 1.20 pounds
Warranty: 6 months
See On Amazon Similar To weyleity 32mm 36mm Fan
#1
Cooling Fan 30mm 28000rpm, RC Car Motor Fan with Alluminum Heatsink 540 550 3650 3660 3670 Brushless Motor Update Parts for 1/8 1/10 RC Car Truck Diameter 36mm 38mm Brushless Motor
Asin: B0C5ZM8KXN
Ip44 Waterproof : Ip44 Waterproof Enables Cooling Fans To Reduce Corrosion In Moisture And Wet Environments, Providing Continuous Excellent Heat Dissipation For Your Motors, Whether In Rain, Wet Conditions Or When You Need To Operate In Water, Reducing Your Cost Of Servicing And Replacing Parts.
Easy To Install: Equipped With Extension Cable, Installation And Use Is More Convenient, Plug And Play, The Black Plug Is Connected To The Car Receiver Or A Separate Power Supply Port, The Red Plug Is Connected To The Fan Wiring, Pay Attention To Correctly Check The Connection Of The Positive And Negative Terminals, To Ensure That The Fan Installation Is Smooth And Normal Work.
High-Quality Material: The Dual Fan With Heatsink Is Made Of Aluminum Alloy And Hard Plastic, High Temperature Resistance, Fast Heat Dissipation, Durable, Small Size, Light Weight, Easy To Carry And Install.
Preventing Motor Overheating: The Motor Cooling Fan Can Maintain Efficient Operation And Cooling Of The Motor, Reduce Esc Temperature During Long-Term Operation, And Effectively Prevent Motor Overheating.
Features
- Compatible with Diameter 36mm Motor: The cooling fan is designed for 1/8, 1/10 scale rc car and the rc motor which diameter is 36mm/1.42 inch, suitable for 540 550 3650 3660 3665 3670 3674 brushless motor, also compatible with INJORA 12T motor, Axial AM27 27T 540 motor, Hobbywing 3650 G2 8.5T brushless motor, GoolRC 3650 4300KV brushless motor
- Preventing Motor Overheating: The motor cooling fan can maintain efficient operation and cooling of the motor, reduce ESC temperature during long-term operation, and effectively prevent motor overheating
- IP44 Waterproof : IP44 waterproof enables cooling fans to reduce corrosion in moisture and wet environments, providing continuous excellent heat dissipation for your motors, whether in rain, wet conditions or when you need to operate in water, reducing your cost of servicing and replacing parts
- High-quality Material: The dual fan with heatsink is made of aluminum alloy and hard plastic, high temperature resistance, fast heat dissipation, durable, small size, light weight, easy to carry and install
- Easy to Install: Equipped with extension cable, installation and use is more convenient, plug and play, the black plug is connected to the car receiver or a separate power supply port, the red plug is connected to the fan wiring, pay attention to correctly check the connection of the positive and negative terminals, to ensure that the fan installation is smooth and normal work
- See more on Amazon...
Brand: WMJNH | Manufacturer: WMJNH
Dimensions: 1.96 x 3.93 x 3.93 inches
See On Amazon #2
Wathai 120mm x 32mm Brushless Cooling Blower Fan High Speed Centrifugal
Asin: B09XXJSCDV
Good Static Pressure. Can Be Use Them In Front Of Server Power Supply Fan. These Fans Are Bigger Than The Server Psu Fans And Only Covers About 60% Of Front Vent..
Dimension: 120Mm(L) X 120Mm(W) X 32Mm(H) / 4.72X4.72X1.26 In. Per Fan.
As Described Small And Powerful, Can Be Used It On An Inflatable Christmas Santa Clause.
Air Circulation, Air Exhausting, Air Ventilation: Cabinet,Indoor Plants Room, Mushroom, Grow Tent Room, Bbq, Biltong Box, Incubator..
Features
- DIY inflatable ,to cool amplifier ,Car Parts, Playtations, Rokus, TVs, receivers, mondems, routers, DVRs, Computers and other audio video electronic.
- air circulation, air exhausting, air ventilation: cabinet,indoor plants room, mushroom, grow tent room, BBQ, Biltong box, incubator.
- Good static pressure. can be use them in front of server power supply fan. these fans are bigger than the server psu fans and only covers about 60% of front vent.
- As described small and powerful, can be used it on an inflatable christmas santa clause
- Dimension: 120mm(L) x 120mm(W) x 32mm(H) / 4.72x4.72x1.26 in. per fan
- See more on Amazon...
Brand: Wathai
See On Amazon
Looking For Something Else?
Search