5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Construction Reamer Drill Bit for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole Reamer
Asin: B0CWRLL4BP | Model: BR-010 | PartNumber: BR-010
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Makes Reaming Holes Out Extremely Easier Than Using Large Drill Bits,The Reamed Hole Is Smooth Without Tear-Outs. But There Must Be An Existing Hole Or Pilot Hole With A Diameter Smaller Than Our Bridge Steel Reamer Bit Before Use.
Commonly Used In Bridge,Construction,Steel Erection And Automotive Truck Trailer Industries,Our Bridge/Construction Reamer Bit For Steel,Metal,Alloy Aluminum,Brass,Plastic,Iron,Nickel,Copper,Cast Iron Etc.Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools.
The Tapered Point Design Permits The Tapered Reamer For Metal To Enter Into The Overlapping Holes Of Out-Of-Line,Make The Bolt Holes Line Up.Enlarging The Holes In The Steering Knuckles And Pitman Arm.
The Heavy Duty High-Speed Steel Bridge Reamer Is Also Called Construction Reamers,It Used For Aligning An Existing Hole And Enlarging Undersized Hole Prior To Bolt Or Rivet Installation.Our Taper Reamer Bit Aligns And Enlarges Pre-Drilled Holes Ready For Bolting.
Features
- M2 HSS taper chucking reamer 5pcs set including 3/8",1/2",5/8",3/4" and 1 fit 1/2" shank chuck with 5-Spiral Flute. The bridge construction reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to enlarge a hole, you must first have an existing hole and then use our taper reamer to enlarge it
- The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our taper reamer bit aligns and enlarges pre-drilled holes ready for bolting
- Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use
- The tapered point design permits the tapered reamer for metal to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
- Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our bridge/construction reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
- See more on Amazon...
Brand: NOVINO | Manufacturer: NOVINO
See On Amazon Similar To 5PCS M2 HSS Taper Chucking
#1
uxcell Metric Machine Tap M2 x 0.4mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT37749 | Model: a18102400ux0265 | PartNumber: a18102400ux0265
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M2 x 0.4mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 1.97 Inches | Weight: 0.00 pounds
See On Amazon #2
uxcell Keyless Drill Chuck MT2 Morse Taper Mount Adjustable 1/32"-1/2" (1mm-13mm) 3-Jaw for Lathes Milling Drilling Machine
Asin: B0776QMXMK | Model: a17092200ux0363 | PartNumber: a17092200ux0363
[3-Jaw] - Classic 3 Jaws Design Drill Chuck With Excellent Clamping Capability. Quenching Hardening And Precision Grinding To Assure Good Wear-Resistant.
[Maintenance] - Clean Up The Mechanical Waste And Foreign Matter Left In The Drill Chuck In Time After Using It..
[Applications] - Suitable For Drilling Equipment Such As Portable Drilling Machine, Bench Drilling Machines, Milling Machines, Lathes, Etc. It Is For Many Different Types Of Drilling Machines.
[Chuck Type] - Keyless Drill Chuck, Can Be Quick And Easily Replaced Drill Bits Without Chuck Key.
Features
- [SIZE] - Clamping Range: 1/32"-1/2" (1mm-13mm), MT2 Morse Taper Arbor Mount
- [CHUCK TYPE] - Keyless Drill Chuck, can be quick and easily replaced drill bits without chuck key
- [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant
- [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is for many different types of drilling machines
- [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 3.15 x 7.87 x 4.33 Inches
See On Amazon #3
M2 HSS Taper Chucking Reamer 5pcs Set, 3/8", 1/2", 9/16", 5/8", 3/4", Fit 3/8" or 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0BRPPWBWS
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 5 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" , 9/16" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 5 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 , 9/16 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #4
uxcell M2 x 0.4 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B09765KM5Y | Model: a20010400ux0063 | PartNumber: a20010400ux0063
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M2 x 0.4 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
WFLNHB Threaded Drill Chuck Arbor 2MT to 1/2"-20 Hardened MT MT2 Adapter for Various Drill Machines, Milling Machines, Lathes, Boring Lathes and Electric Hand Tools.
Asin: B07YXK6J76 | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110113904
Works Great With Our Threaded Drill Chucks.
High Quality.
Arbor Will Fit For All Threaded Drilled Chucks That With A 1/2"-20 Thread Bore And Will Fit On Any Machine Tool With A 2Mt Spindle..
Made Of Accuracy Ground, High Grade Tool Steel.
Features
- Long end is 2MT, short end is 1/2"-20
- Made of accuracy ground, high grade tool steel
- Works great with our threaded drill chucks
- Arbor will fit for all threaded drilled chucks that with a 1/2-20 thread bore and will fit on any machine tool with a 2MT spindle.
- High Quality
- See more on Amazon...
Brand: WFLNHB | Manufacturer: WFLNHB
See On Amazon #6
uxcell Spiral Point Plug Threading Tap M2 x 0.4 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B07Z9RJM75 | Model: a19091100ux0206 | PartNumber: a19091100ux0206
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: Thread size: M2 x 0.4; thread tolerance: H2; thread length: 10mm / 0.4"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
HighFree Key Type Drill Chuck MT2 Connecting Rods with Carbon Steel 1-13mm Capacity Stable for Centering, Tapping, Reaming Operation for Metal and Wood Lathes
Asin: B089M6V7XN | Model: HF-0154 | PartNumber: HF-0154 | Ean: 0609832330189 | UPC: 609832330189
【Size】Drill Chuck Total Length: Approx. 16Cm/6.3Inch, Wrench Length: Approx. 8.2Cm/3.2Inch..
【Application】This Lathe Drill Chuck Is Perfect For Drilling Machines, Suitable For Centering, Drilling, Tapping, Reaming Operation..
【Great Design】Excellent Waterproof And Dust-Proof Capability Ensures That Its Inner Core Components Will Not Be Damaged By Magazines And Effectively Extend Its Service Life..
【Easy To Use】Wrench Style Chuck, Using Chuck Key Rotation, Which Offers More Efficient And Accurate Adjustment. Make It Easy To Use..
Features
- High Quality The mini lathe drill chuck is made of high-carbon steel, hard and durable, accurate precision and stable performance for long lasting and trouble free use.
- Easy to Use Wrench style chuck, using chuck key rotation, which offers more efficient and accurate adjustment. Make it easy to use.
- Size Drill chuck total length: approx. 16cm/6.3inch, wrench length: approx. 8.2cm/3.2inch.
- Great Design Excellent waterproof and dust-proof capability ensures that its inner core components will not be damaged by magazines and effectively extend its service life.
- Application This lathe drill chuck is perfect for drilling machines, suitable for centering, drilling, tapping, reaming operation.
- See more on Amazon...
Brand: HighFree | Manufacturer: Wotone
Dimensions: 3.35 x 5.12 x 4.72 Inches
See On Amazon #8
uxcell MT2 Morse Taper Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Finish Hand Reamer Cutter Milling Tool Conical reamer for Bore Machining
Asin: B091KBFR4Q | Model: a20103000ux0072 | PartNumber: a20103000ux0072
Wide Applications: Used For Processing, Handicraft Processing, And Bore Machining. Can Be Used To Repair Drilled Holes And Improve Hole Accuracy. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. The Blade Is Sharp And Fine, And The Cutting Efficiency Is High. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness And Durability, Not Easy To Wear And Can Be Used For A Long Time. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Taper size: MT2; cutting diameter (Max.): 18mm / 0.71"; cutting diameter (Min.): 15mm / 0.59"; accuracy class: H8. The Morse Taper reamers ream the Morse Taper shape, and provide finish cuts.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness and durability, not easy to wear and can be used for a long time. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for processing, handicraft processing, and bore machining. Can be used to repair drilled holes and improve hole accuracy. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. The blade is sharp and fine, and the cutting efficiency is high. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #9
uxcell 2mm Chucking Reamer, Tungsten Carbide Lathe Machine Reamer H7 4 Straight Flutes, Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal
Asin: B08FB78YZY | Model: a19120900ux0885 | PartNumber: a19120900ux0885
Round Shank: Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Application: Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Applications In Shallow Cuts. Tungsten Carbide Reamer Is With High Hardness And Strong Wear Resistance For Long Service Life.
Uncoated Tool: Features Just The Base Substrate Without Any Additional Treatment Or Coatings. Heat Treated And Quenched For Stable Performance, Suitable For Wide Ranges Of Applications.
Features
- Specifications: Cutting dia.: 2mm / 0.08"; tool flute length: 25mm / 1.0"; overall length: 50mm / 2.0"; accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
MAXTOOL 5/8" Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 2; TS02B05R40
Asin: B079Q2QBZ6 | Model: TS02B05R40 | PartNumber: TS02B05R40 | Ean: 0634301935343 | UPC: 634301935343
Black Oxide Surface Holds Up Lubricant Better And Lead Coolant Near The Cutting Edge For Smoother Drilling.
The Drills Confirm To One Of Ansi/Asme B94.11M, Nas907, And Uscti Standard; Fl 4-7/8"; Oal 8-3/4"; 118 Deg Conventional Chisel.
Mt Shank Allows Drills Installed Directly Into The Machine's Spindle For High-Torque Applications.
Premium Heat Treated Hrc63-66 Is Durable And Can Withstand Heavy Duty Operation For A Long Tool Life.
Features
- Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance
- Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life
- Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling
- MT shank allows drills installed directly into the machine's spindle for high-torque applications
- The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard; FL 4-7/8; OAL 8-3/4; 118 Deg Conventional Chisel
- See more on Amazon...
Brand: MaxTool | Manufacturer: JiagsuTianshun
Dimensions: 1.00 x 10.00 x 1.00 Inches | Weight: 290.00 Grams
See On Amazon #11
Lichamp 5pcs Reamer Drill Bit, 3/8" 1/2" 9/16" 5/8" 3/4" High Speed Steel Chucking Reamer Set Tapered Reamer for Metal
Asin: B0CCJ1XGKP
Wide Applications - Works Well In Free Cutting And Carbon Steels, As Well As Soft, Non-Ferrous Materials Such As Aluminum, Brass And Copper..
Safe Straight Shank - Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
Five Grooves Fast Drilling - Reversed Spiral Push Chips Forward And Are Ideal For Through-Hole Applications, Reduces The Friction, Runs Cooler, Performs Well In Heat, Corrosion And Rust Resistance..
M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Features
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles.
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper.
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance.
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Brand: Lichamp | Manufacturer: LICHAMP
See On Amazon #12
uxcell Metric Spiral Machine Screw Tap M2.5 Thread 0.45 Pitch H2 Titanium High Speed Steel
Asin: B07VDR5M67 | Model: a19051000ux0623 | PartNumber: a19051000ux0623
Material: Hss (High Speed Steel); Surface Treatment: Ti Coated.
Suitable For Drilling, Tapping, Cutting On Soft Metal, Aluminum Plate, Iron..
Used With Some Cutting Fluid Or Keep It Wet When Tapping, The Tap Will Last Longer..
Thread Length: 13Mm / 0.5 Inch; Total Length: 48Mm / 1.9 Inch.
Features
- Thread Size: M2.5; Pitch: 0.45; Shank Side Width: 2.2mm / 0.1 inch
- Thread Length: 13mm / 0.5 inch; Total Length: 48mm / 1.9 inch
- Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
- Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell MT2 Morse Taper Reamer Coarse and Finish Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Hand Reamer Cutter Milling Tool 2pcs
Asin: B091L2DVZB | Model: a20103000ux0034 | PartNumber: a20103000ux0034
Wide Applications: Used For Processing, Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness And Durability. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Taper size: MT2; cutting diameter (Max.): 18mm / 0.71"; cutting diameter (Min.): 15mm / 0.59"; accuracy class: H8. The reamer set reams the Morse Taper shape, and provide coarse and finish cuts.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness and durability. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
AROMAPET Yodaoke HSS M2 x 0.4mm Taper and Plug Tap and M2 x 0.4mm Die Metric Thread Right Hand
Asin: B08Q3QJG5Z | Model: M2 x 0.4mm | PartNumber: M2 x 0.4mm | Ean: 0769135410329 | UPC: 769135410329
Tap Long: 45Mm.
Package Included: 1 X Tap & 1 X Die.
Die Od: 12Mm H: 3Mm.
Material: Hss.
Features
- M2 x 0.4mm Taper & Plug Tap & M2 x 0.4mm Die Metric Thread Right Hand HSS
- Material: HSS
- Tap Long: 45mm
- Die OD: 12mm H: 3mm
- Package included: 1 x Tap & 1 x Die
- See more on Amazon...
Brand: AROMAPET | Manufacturer: Yodaoke
See On Amazon #15
5/64 HSS Chucking Reamer, Michigan Drill Series 551 (Pack of 2)
Asin: B07CNYQH5F | Model: 551 | PartNumber: 551 | Ean: 0728012067360 | UPC: 728012067360
Brand: MDX | Manufacturer: Michigan Drill
See On Amazon #16
uxcell Spiral Point Plug Threading Tap M2 x 0.4 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair
Asin: B07Z9RR7PP | Model: a19091100ux0205 | PartNumber: a19091100ux0205
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: Thread size: M2 x 0.4; thread tolerance: H2; thread length: 10mm / 0.4"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Metric Machine Tap M5 Thread 0.8 Pitch H2 3 Flutes Hex Shank High Speed Steel
Asin: B07VFW37QL | Model: a19051000ux0641 | PartNumber: a19051000ux0641
Material: Hss (High Speed Steel); Surface Treatment:Blackening.
Suitable For Drilling, Tapping, Cutting On Soft Metal, Aluminum Plate, Iron..
Straight 3 Flutes Are Ground To Provide Rapid Chip Removal For Efficient Threading..
Thread Length: 22Mm / 0.87 Inch; Total Length: 62Mm / 2.4 Inch.
Features
- 6.3mm / 1/4 inch Hex Shank Tap Thread Size: M5; Pitch: 0.8; Accuracy: H2
- Thread Length: 22mm / 0.87 inch; Total Length: 62mm / 2.4 inch
- Material: HSS (High Speed Steel); Surface Treatment:Blackening
- Straight 3 flutes are ground to provide rapid chip removal for efficient threading.
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #18
uxcell 2pcs Metric Thread Taps M2 x 0.4 H2 Titanium Coated High Speed Steel Straight Flute Screw Thread Milling Machine Taps Threading Tapping Repair Tool
Asin: B0CWPF2W1W
Wide Applications: Thread Taps Create New Threads Or Re-Thread Damaged Or Jammed Threads. Widely Used For Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel. Add Proper Tapping Oil For Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Used With Tapping, Drilling, Automatic Or Milling Machines. Drill The Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. The Tapping Angle Should Be 90 Degrees Vertical And Stable. Not Recommended For Hand And Electric Drill Tapping..
6542 High Speed Steel Tap: Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. Titanium Coating Provides Excellent Corrosion Resistance, Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction For Smoother And Faster Tapping Performance..
Straight Flute Tap: Straight Flute Design, Clear Threads Without Burrs, Right Hand Tapping Direction. Provides Rapid Downward Chip Removal To Achieve Efficient Thread Cutting, Suitable For Processing Through Holes Or Shallow Holes..
Features
- Metric Thread Tap: Thread size: M2 x 0.4 (right hand); accuracy: H2; total length: 44mm / 1.73"; square shank width: 2.5mm / 0.1"; thread length: 10mm / 0.39"; number of chip flutes: 3 flutes
- Straight Flute Tap: Straight flute design, clear threads without burrs, right hand tapping direction. Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.
- Wide Applications: Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel. Add proper tapping oil for higher quality threads and more durable taps.
- 6542 High Speed Steel Tap: Offer high hardness, good toughness, wear resistance, and excellent cutting performance. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction for smoother and faster tapping performance.
- Tips: Machine taps are used with tapping, drilling, automatic or milling machines. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable. NOT recommended for hand and electric drill tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 5mm Chucking Reamer, HSS Cobalt M35 Lathe Machine Reamer D4 6 Straight Flutes, Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal, 2pcs
Asin: B08FB1X2ML | Model: a19112600ux0377 | PartNumber: a19112600ux0377
Round Shank: Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Application: Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers.
Features: Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Most Applications In Shallow Cuts. Reamer Is With High Hardness, Toughness, Wear Resistance, Long Service Life.
Uncoated Tool: Features Just The Base Substrate Without Any Additional Treatment Or Coatings. Heat Treated And Quenched For Stable Performance, Suitable For Wide Ranges Of Applications.
Features
- Specifications: Cutting dia.: 5mm / 0.2"; tool flute length: 18mm / 0.71"; overall length: 85mm / 3.35"; accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search