CoCud Square Nose End Mill, 4 Flute 0.98" Cutting Dia, Solid Tungsten Carbide Tip Milling Cutter - (Applications: for Steel and Plastic Cutting)
Asin: B0CWRZTD9Y
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★ 4-Flute Design --- 4 Flutes Help Improve Chip Evacuation And Reduce The Possibility Of Clogging During Machining. Straight Flute Tools Collect Chips In The Flute As They Cut, Making Them Suit For Most Shallow Cutting Applications..
★ Useful Tips --- If The Clamping Length Is Short, The Feed And Cutting Speed Need To Be Reduced To Reduce Vibration And Extend Its Service Life..
★ Tungsten Carbide --- The Tip Is Made Of Tungsten Carbide, Ensuring High Hardness, Good Toughness, Wear Resistance, High Temperature Resistance. With Good Milling And Cutting Performance, Carbide Can Run At Higher Speed Than High-Speed Steel..
★ Wide Applications --- Widely Used In Factories, Workshops, Special Equipment Manufacturing, Etc. Suitable For Cutting Alloy Steel, Stainless Steel, Carbon Steel, Aluminum, Copper, Plastic, Etc. Can Be Used On Cnc, Milling Machines, Drilling Machines, Lathes And Other High-Speed Cnc Machine Tools..
Features
- Square Nose End Mill Size --- Cutting Diameter: 25mm / 0.98 inch, Cutting Length: 20mm / 0.79 inch, Overall Length: 105mm / 4.13 inch, Straight Shank Diameter: 25mm / 0.98 inch, Number of Flutes: 4 Flutes. You will receive 1pcs square nose end mill in 1 package.
- Wide Applications --- Widely used in factories, workshops, special equipment manufacturing, etc. Suitable for cutting alloy steel, stainless steel, carbon steel, aluminum, copper, plastic, etc. Can be used on CNC, milling machines, drilling machines, lathes and other high-speed CNC machine tools.
- 4-Flute Design --- 4 flutes help improve chip evacuation and reduce the possibility of clogging during machining. Straight flute tools collect chips in the flute as they cut, making them suit for most shallow cutting applications.
- Tungsten Carbide --- The tip is made of tungsten carbide, ensuring high hardness, good toughness, wear resistance, high temperature resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Useful Tips --- If the clamping length is short, the feed and cutting speed need to be reduced to reduce vibration and extend its service life.
- See more on Amazon...
Brand: CoCud | Manufacturer: CoCud
See On Amazon Similar To CoCud Square Nose End Mill
#1
SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall
Asin: B083K79L2C
For Cnc Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Endmill Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Flat Top With 2-Flute, Material: Solid Carbide With Tialn Coated For Hrc 55.
Features
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
- Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
- For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
- The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #2
F&D Tool Company 18992-XL918 Multiple Flute Square Nose End Mill, Single End, Extra Long, Premium Cobalt Steel, 1/2" Mill Diameter, 1/2" Shank Diameter, 3" Flute Length, 5" Overall Length, 4 Number of Flutes
Asin: B00GWR9IXK | Model: 18992-XL918 | PartNumber: 18992-XL918
Regularly Furnished With Right Hand Cut And Right Hand Spiral.
Made In Usa.
Mill Diameter: 1/2 - Shank Diameter: 1/2 - Flute Length: 3 - Overall Length: 5 - Number Of Flutes: 4.
Features
- Multiple Flute Endmill - Single End - Extra long - Premium Cobalt Steel
- Mill Diameter: 1/2 - Shank Diameter: 1/2 - Flute Length: 3 - Overall Length: 5 - Number of Flutes: 4
- Regularly furnished with right hand cut and right hand spiral
- Made in USA
- See more on Amazon...
First Available: 05/15/2017
Brand: F&D Tool Company | Manufacturer: F&D Tool Company
See On Amazon #3
ASNOMY 5PCS 1-4mm Ball Nose Carbide End Mill Set, CNC Cutter Router Bits 2 Flute Spiral Milling Tool HRC55, Includes 5 Radius Sizes of 1mm 1.5mm 2mm 3mm 4mm
Asin: B09V131ZS1 | Ean: 0725576864336 | UPC: 725576864336
Widely Application: Nano Carbide Ball Nose Mill Tools Perfect For Hard Materials Carbon Steels , Alloy Steels , Pre-Hardened Steels , Hardened Steels, Cast Iron,Titanium Alloy, Graphite, Plastic, Composite Material Etc;.
Satisfaction: Asnomy Aims To Provide High-Grade Products And Customer Service To All Customers. Any Problems, Just Contact Us And Our After-Sale Team Will Solve Your Problems Asap..
R1.0 - R4.0Mm End Mill Set: This 2 Flute Ball Nose Milling Cutter Set Include 5Pcs Altin Coated End Mill, No Longer Have To Worry About Wastage, Can Satisfy Your Different Needs;.
Altin Coating: Titanium Aluminum Nitride (Altin) Coating Lubricates The End Mill For Stability At High Temperature And Superior Wear Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Tialn, Tin Or Ticn Coatings;.
Features
- Top Quality: The End Mill Round Top with 2-Flute Made from HRC55 Carbide with AlTiN Coated that is very tough, resists wear and offers high cutting performan;
- AlTiN Coating: Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings;
- Widely Application: Nano carbide ball nose Mill tools perfect for Hard Materials carbon steels , alloy steels , pre-hardened steels , hardened Steels, cast iron,Titanium Alloy, Graphite, plastic, composite material etc;
- R1.0 - R4.0mm End Mill Set: This 2 flute ball nose Milling Cutter set include 5pcs AlTiN Coated end mill, no longer have to worry about wastage, can satisfy your different needs;
- Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #4
SPEED TIGER Carbide Square End Mill - ISE 4T (3 Piece Set: 5/16 , 3/8 , 1/2 ) - for Drilling Alloy or Hardened Steel, Metal & More - 4 Flute Mill Bits Sets for DIYers & Professionals
Asin: B0B7WP3GDX | Model: ISE-SET_5-16_3-8_1-2_4T | PartNumber: ISE-SET_5-16_3-8_1-2_4T
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Altibn Coating - This Coating, Made Of Titanium Aluminum Boron Nitride (Altibn), Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Features
- APPLICATION - Our carbide tools are highly effective for working with Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.
- AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.39 x 2.09 x 2.60 inches
See On Amazon #5
YG-1 - 52901 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080D4SMU | Model: 52901 | PartNumber: 52901
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #6
Rannb Square End Mill 1/2" Cutting Dia x 1/2" Shank Dia 4 Flute Straight End Mill Cutter - 2pcs
Asin: B09W2K6W93 | Model: wby2714 | PartNumber: wby2714
【Application】Suitable For Side Milling, End Milling, Finish Machining In Carbon Steel, Alloy Steel, Die Steel, Tool Steel, Cast Iron, And Titanium..
【Package Content】2Pcs X Square End Mill + 2Pcs X Box.
【High Efficiency】 Large Front Angle Effectively Reduces Cutting Resistance, Sharp And Durable, Convenient For Chip Removal, Further Improve Machining Efficiency..
【Dimension】Shank Dia:1/2"/12.7Mm; Cutting Dia:1/2"/12.7Mm; Cutting Depth:1-1/2"/38Mm;Total Length: 3-3/8"/85Mm.
Features
- Material The End Mill is made of High Speed Steel with high hardness, good wear resistance and durability.
- Dimension Shank Dia:1/2/12.7mm; Cutting Dia:1/2/12.7mm; Cutting Depth:1-1/2/38mm;Total Length: 3-3/8/85mm
- Application Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.
- High Efficiency Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
- Package Content 2pcs x Square End Mill + 2pcs x Box
- See more on Amazon...
Brand: Rannb | Manufacturer: Rannb
See On Amazon #7
JIULI TOOL 6pcs Carbide End Mills Set Square Nose 3 Flutes End Mill for Aluminum Alloy DLC Coating HRC 55
Asin: B0BCG8Y5CS | Model: 55 3F DLC 6pcs 1-6 | PartNumber: 55 3F DLC 6pcs 1-6
[5]Applicable Cutting Materials: Aluminum, Copper, Aluminum Alloy, Magnesium Alloy, Zinc Alloy, Can Directly And Quickly Cut Aluminum 6061..
[7] Applicable Machine Tools: Cnc Machining Centers, Engraving Machines, Precision Engraving Machines And Other High-Speed Machines..
[6]Processing Methods: Helical Machining, U-Shaped Machining, Side Machining, Plane Machining, Grooving, Which Can Be Used For Rough Machining And Finishing Machining..
[3]Material:Solid Carbide End Mills, Tungsten Steel Bar, Helix Angle + Large Core Diameter. [4] Main Features: Dlc Color Coating Ensures The Wear Resistance And Stability Of The Tool In The Process Of Large Feed And Large Cutting. Double Margin + Arc-Shaped Margin Design, High Strength And Anti-Vibration, Make The Surface Of The Workpiece Smooth. The Sharp Positive Cutting Edge Design Reduces Cutting Resistance And Improves Work Efficiency..
Features
- [1]Package: DLC Square Nose end mills 6pcs. [2] Dimensions include: (d1x3Cx4Dx50L)+(d2x6Cx4Dx50L)+(d3x8Cx4Dx50L)+(d4x10Cx4Dx50L)+(d5x13Cx6Dx50L)+(d6x15Cx6Dx50L), Annotation: d=Flutes Diameter, D=Shank Diameter, C=Flutes Length, L=Full length.
- [3]Material:Solid Carbide End Mills, tungsten steel bar, helix angle + large core diameter. [4] Main features: DLC color coating ensures the wear resistance and stability of the tool in the process of large feed and large cutting. Double margin + arc-shaped margin design, high strength and anti-vibration, make the surface of the workpiece smooth. The sharp positive cutting edge design reduces cutting resistance and improves work efficiency.
- [5]Applicable cutting materials: aluminum, copper, aluminum alloy, magnesium alloy, zinc alloy, can directly and quickly cut aluminum 6061.
- [6]Processing methods: helical machining, U-shaped machining, side machining, plane machining, grooving, which can be used for rough machining and finishing machining.
- [7] Applicable machine tools: CNC machining centers, engraving machines, precision engraving machines and other high-speed machines.
- See more on Amazon...
Brand: JIULI TOOL | Manufacturer: JIULI TOOL
See On Amazon #8
OSCARBIDE Up & Down Cut Squre Nose Carbide End Mills 1/8 Inch Shank CNC Spiral Router Bits,(3.175x22mm) 2 Flutes Milling Cutter for Wood,5 Pieces
Asin: B07VBXR9RX | Ean: 0782500239653 | UPC: 782500239653
☆Due To The Great Hardness Of Solid Tungsten Carbide, It Provides Excellent Abrasive And Wear-Resistance, Bits Stay Balanced During High Speed Rotation Process.
☆Double Flute Spiral Solid Carbide Up-Down Cut End Mill Router Bits Are Widely Used For Cnc Engraving, Milling, Roughing, Hollowing, 3D Sculpturing Purposes.
☆Fast Chip-Removal Volume And Speed, Non-Stick With Bits, Suitable For Composite Multilayer Board, Hard Wood, Polywood, Acrylic.
☆The Unique Flute Design Makes Cutting Process Easier And Faster, Smooth Cutting Without 2Nd Polishing Process, Altin-Coated Improved The Bits Service Life.
Features
- Up Down Cut Carbide End Mill,1/8" Shank X 1/8"Cutting Dia, 22mm Flute Length with 2 Spiral Flutes, Total length 45 mm, 5 pieces per pack
- The Unique Flute Design makes cutting process easier and faster, Smooth Cutting Without 2nd polishing process, ALTIN-Coated Improved the bits service life
- Due to the Great hardness of solid Tungsten carbide, it provides excellent abrasive and wear-resistance, Bits Stay Balanced during High Speed rotation process
- Fast Chip-Removal volume and Speed, Non-stick With bits, Suitable For Composite multilayer board, hard wood, polywood, acrylic
- Double Flute Spiral Solid Carbide Up-Down Cut End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
- See more on Amazon...
Brand: OSCARBIDE | Manufacturer: OSCARBIDE TOOLS
See On Amazon #9
YG-1 - 50573 E5014 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CVW02 | Model: 50573 | PartNumber: 50573
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #10
CoCud Square Nose End Mill, 1mm x 25mm Cutting, Long Reach Titanium (Nano-Scale) Coated Carbide 2 Flutes CNC Router Bits - (Applications: for Stainless Steel Cast Iron Metal)
Asin: B0CJHX49C6
★Ease Of Use --- Sharp Square Cutting Edges Allow For Efficient, Precise Milling Operations, And 2 Flutes Help Improve Chip Evacuation And Reduce The Chance Of Clogging During Machining. Used With Cnc Milling Machines, Router Machines, And Engraving Machines..
★ Useful Tips --- Make Sure It Is Securely Seated And Tightened. Use An Appropriate Coolant Or Lubricant To Enhance Chip Evacuation And Heat Dissipation, And Monitor And Control The Cutting Parameters. Excessive Heat Can Affect Tool Life And Performance..
★ Ultra-Fine Grain Carbide --- Excellent Hardness (Hrc92), Wear Resistance, High Strength, Good Toughness And Heat Resistance. Titanium (Nano-Scale) Coating Increases Hardness, Wear Resistance, Tool Life, Reduces Friction, Improves Chip Evacuation, And Enhances Surface Finish. Ultra-Thin Nano Coating Provides Improved Precision And Can Enhance Performance..
★ Wide Applications --- Suitable For Creating Flat-Bottomed Slots, Pockets, Or Profiles, And For Machining Carbon Steel, Stainless Steel, Cast Iron, Non-Ferrous Metals, Aluminum And Plastics. Designed With An Extended Neck (Long Reach) To Provide Extra Reach And Clearance For Machining Deep Or Hard-To-Reach Areas..
Features
- Square Nose End Mill Size --- Cutting diameter: 1mm / 0.039", effective cutting length: 25mm / 0.98" ( flute length: 3mm / 0.12"; extended neck length: 22mm / 0.87"), shank diameter: 4mm / 0.16", total length: 50mm / 2", cutting hardness: HRC60.
- Wide Applications --- Suitable for creating flat-bottomed slots, pockets, or profiles, and for machining carbon steel, stainless steel, cast iron, non-ferrous metals, aluminum and plastics. Designed with an extended neck (long reach) to provide extra reach and clearance for machining deep or hard-to-reach areas.
- Ease of Use --- Sharp square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during machining. Used with CNC milling machines, router machines, and engraving machines.
- Ultra-fine Grain Carbide --- Excellent hardness (HRC92), wear resistance, high strength, good toughness and heat resistance. Titanium (nano-scale) coating increases hardness, wear resistance, tool life, reduces friction, improves chip evacuation, and enhances surface finish. Ultra-thin nano coating provides improved precision and can enhance performance.
- Useful Tips --- Make sure it is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. Excessive heat can affect tool life and performance.
- See more on Amazon...
Brand: CoCud | Manufacturer: CoCud
See On Amazon #11
Luomorgo 4 Flute Full Grinded Sqaure Nose End Mill Cutter 3pcs (5/8 3/4 7/8 Blade Diameter)
Asin: B07BNFNCPV | Ean: 0665268097577 | UPC: 665268097577
Widely For Machine Various Round Headed Flat Key Seats Or For Milling Grooves And Bores..
Can Processing Directly Or Fine Processing To The Heat Treatment Mold; Reducing The Number Of Tool Changes, Improve Machine Actuator Movement Rhythm, Save Mold Making Time.(Note: Not Work For Very Harder Materials).
Product Content: 5/8X3/4" Milling Cutter X1;3/4X3/4"Milling Cutter X1;7/8X3/4"Milling Cutter X1.
Comes With A Storage Case, It Is Convenient For You To Carry It About..
Features
- 4 Flute Straight; Made of High Speed Steel,long tool life
- Comes with a storage case, it is convenient for you to carry it about.
- Widely for machine various round headed flat key seats or for milling grooves and bores.
- Product Content: 5/8x3/4 milling cutter X1;3/4x3/4milling cutter X1;7/8x3/4milling cutter X1
- Can processing directly or fine processing to the heat treatment mold; reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time.(NOTE: not work for very harder materials)
- See more on Amazon...
Brand: Luomorgo | Manufacturer: Luomorgo
See On Amazon #12
SPEED TIGER Carbide Square Nose End Mill with ZrN Coating - 2 Flute - IAE5-1/2"2T-ZrN (1 Piece, 1/2")- for Milling Aluminum Applications Mill Bits Sets for DIYers & Professionals
Asin: B0CWV4QXV6
High-Performance Material - Crafted From Micrograin Carbide, This End Mill Offers Exceptional Toughness, Durability, And Machinability, Delivering Outstanding Performance And Great Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
Zrn Coating: Experience Enhanced Stability At High Temperatures And Superior Wear Resistance At High Cutting Speeds. The Zrn Coating Acts As As Lubricant For The End Mill, Ensuring Better Surface Quality..
Features
- APPLICATION - This carbide tool from Speed Tiger is highly proficient in working with aluminum and copper materials.
- ZrN Coating: Experience enhanced stability at high temperatures and superior wear resistance at high cutting speeds. The ZrN coating acts as as lubricant for the end mill, ensuring better surface quality.
- HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
See On Amazon #13
GLOMINGLE Carbide Square Nose End Mill, 2 Pieces, 4 Flute 1/4" Shank, Good Flute Spacing, for Stainless Steel, Copper, and Aluminum Alloy, Power Drill Bit Stes for DIY & Professional
Asin: B0C874MJDS
Strong Edge With Coating Prevents Chipping At Corners.
Unequal Flute Spacing And Irregular Flutes Ensures Stable Machining Of Difficult-To-Cut Materials.
Features
- Cemented carbide ALTiN coating ensure superior wear and chipping resistance
- Unequal flute spacing and irregular flutes ensures stable machining of difficult-to-cut materials
- Strong edge with coating prevents chipping at corners
- See more on Amazon...
Brand: GLOMINGLE | Manufacturer: Glomingle
Dimensions: 0.10 x 2.50 x 0.25 inches
See On Amazon #14
8pcs 2-12mm CNC Square Nose End Mills Set, Tungsten Carbide End Mill Bits, 4 Flutes Carbide End Mill Set Tungsten Steel Milling Cutter Tool Kit for High Speed Milling
Asin: B0BZRZQCTL
[Detailed Design]: High-Precision Cutting Edge, The Forefoot Adopts A Suitable Negative Design, Taking Into Account The Strength And Sharpness Of The Cutting Edge. At The Same Time, The Adoption Of A Large Core Diameter Improves The Rigidity Of The Tool, Making Cutting And Chip Removal Stable..
[Buy With Confidence]: If You Have Any Quality Problems After Receiving Our Products, Please Contact Us In Time, And We Will Reply To You As Soon As Possible To Compensate For Your Unpleasant Shopping Experience.
[Wide Application Cnc End Mill]: It Can Be Used On Many Fields, Such As Metal Processing, Cnc Machining And Engineering Using. Large Chip Flute Design For Smoother Chip Removal, Making The Workpiece Smoother And Brighter..
[2-12Mm End Mill Set]: This End Mill Set Includes 8 Diameter Sizes Of 2Mm, 3Mm, 4Mm, 5Mm, 6Mm, 8Mm, 10Mm, 12Mm, Satisfy Your Different Needs..
Features
- [High Quality]: Our products are made of tungsten carbide, which has the advantages of high hardness, wear resistance, strong toughness. Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal
- [2-12mm End Mill Set]: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs.
- [Detailed Design]: High-precision cutting edge, the forefoot adopts a suitable negative design, taking into account the strength and sharpness of the cutting edge. At the same time, the adoption of a large core diameter improves the rigidity of the tool, making cutting and chip removal stable.
- [Wide Application CNC End Mill]: It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.
- [Buy with Confidence]: If you have any quality problems after receiving our products, please contact us in time, and we will reply to you as soon as possible to compensate for your unpleasant shopping experience
- See more on Amazon...
Brand: ANKROYU | Manufacturer: ANKROYU
Dimensions: 3.94 x 7.87 x 3.94 Inches
See On Amazon #15
CoCud Square Nose End Mills, 1mm x 3mm Cutting 4mm Shank, AlTiN Coated P05 Carbide 4 Flutes CNC Router Bits - (Applications: for Milling Stainless Steel Hardened Steel), 2-Pieces
Asin: B0CHP4V2RG
★Ease Of Use --- Sharp Square Cutting Edges Allow For Efficient, Precise Milling Operations, And 4 Flutes Help Improve Chip Evacuation And Reduce The Chance Of Clogging During Machining. Used With Cnc Milling Machines, Router Machines, And Engraving Machines..
★ Useful Tips --- Make Sure It Is Securely Seated And Tightened. Use An Appropriate Coolant Or Lubricant To Enhance Chip Evacuation And Heat Dissipation, And Monitor And Control The Cutting Parameters. Excessive Heat Can Affect Tool Life And Performance..
★ P05 Tungsten Carbide --- Provides Excellent Hardness, Wear Resistance, High Strength, Good Toughness And Heat Resistance. Altin Multilayer Coatings Improve Lubricity, Reduce Friction, And Enhance Hardness, Wear Resistance And Overall Tool Life, And Increase Cutting Speeds And Feeds.
★ Wide Applications --- Suitable For Creating Flat-Bottomed Slots, Pockets, Or Profiles. It Is Used For Machining Stainless Steel, Alloy Steel, Cast Iron, Hardened Steel, Non-Ferrous Metals, Aluminum And Plastics. (Hrc45 Cutting Hardness).
Features
- Square Nose End Mill Size --- The end mill with 1mm / 0.04" cutting diameter; 3mm / 0.12" cutting length; 4mm / 0.16" shank diameter; 50mm / 2" total length; 4 flutes; 35 degree spiral angle.
- Wide Applications --- Suitable for creating flat-bottomed slots, pockets, or profiles. It is used for machining stainless steel, alloy steel, cast iron, hardened steel, non-ferrous metals, aluminum and plastics. (HRC45 cutting hardness)
- Ease of Use --- Sharp square cutting edges allow for efficient, precise milling operations, and 4 flutes help improve chip evacuation and reduce the chance of clogging during machining. Used with CNC milling machines, router machines, and engraving machines.
- P05 Tungsten Carbide --- Provides excellent hardness, wear resistance, high strength, good toughness and heat resistance. AlTiN multilayer coatings improve lubricity, reduce friction, and enhance hardness, wear resistance and overall tool life, and increase cutting speeds and feeds
- Useful Tips --- Make sure it is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. Excessive heat can affect tool life and performance.
- See more on Amazon...
Brand: CoCud | Manufacturer: CoCud
See On Amazon #16
YG-1 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.0625" Overall Length, 0.25" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080CZUU0 | Model: 18047 | PartNumber: 18047 | Ean: 0733438180470 | UPC: 733438180470
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #17
CoCud Carbide End Mill Engraving Milling Bits, 0.8mm Bit Dia. 1/8" Shank, CNC Cutting Router Bits Tool - (Applications: for PCB Machine), 10-Pieces
Asin: B0BWRLF86S
★ Wear Resistance --- The Cutting Edge Is Sharp, The Surface Is Clean, Neat And Burr-Free. It Has Sufficient Bending Strength And Wear Resistance..
★ Useful Tips --- According To The Hardness Of The Material To Be Processed, Selecting The Appropriate Feed Rate And Cutting Speed Can Improve The Tool Life..
★ Carbide --- The Spiral Milling Cutter Is Made Of Carbide, That Is Good Milling Properties To Ensure Efficient Work..
★ Wide Applications --- Wide Ranges Of Materials Can Be Engraved, Such As Circuit Boards, Metal, Plastics, Wood, Smt, Pcb, Fiber Glass, Carbon, Etc..
Features
- Carbide End Mill Engraving Bit Size --- Cutting Edge Diameter: 0.8mm / 0.031"; Shank Diameter: 3.175mm / 1/8"; Cutting Edge Length: 5.5mm / 0.22"; Overall Length: 38mm / 1.5"
- Wide Applications --- Wide ranges of materials can be engraved, such as circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc.
- Wear Resistance --- The cutting edge is sharp, the surface is clean, neat and burr-free. It has sufficient bending strength and wear resistance.
- Carbide --- The spiral milling cutter is made of carbide, that is good milling properties to ensure efficient work.
- Useful Tips --- According to the hardness of the material to be processed, selecting the appropriate feed rate and cutting speed can improve the tool life.
- See more on Amazon...
Brand: CoCud | Manufacturer: CoCud
See On Amazon #18
CoCud Square Nose End Mill, 14mm x 26mm Cutting 12mm Shank, HSS-AL 2 Flutes CNC Router Bit Milling Cutter - (Applications: for Aluminum Alloy Copper Plastic)
Asin: B0CJ84WM8Z
★Ease Of Use --- Sharp Square Cutting Edges Allow For Efficient, Precise Milling Operations, And 2 Flutes Help Improve Chip Evacuation And Reduce The Chance Of Clogging During Machining..
★ Useful Tips --- Make Sure It Is Securely Seated And Tightened. Use An Appropriate Coolant Or Lubricant To Enhance Chip Evacuation And Heat Dissipation, And Monitor And Control The Cutting Parameters. Excessive Heat Can Affect Tool Life And Performance..
★ Hss-Al --- High-Speed Steel Tool Has Toughness, Good Wear Resistance, Heat Resistance, And Can Withstand High Cutting Speeds. Aluminum Coating On High-Speed Steel End Mills Provides Additional Lubricity And Heat Resistance, Reducing Friction. It Helps Improve Chip Evacuation And Extends Tool Life..
★ Wide Applications --- The End Mill Is Suitable For Creating Flat-Bottomed Slots, Pockets, Or Profiles. Used For Machining Aluminum, Aluminum Alloy, Copper, Plastic, And Wood. Used With Cnc Milling Machines, Router Machines, And Engraving Machines..
Features
- Square Nose End Mill Size --- Cutting diameter: 14mm / 0.55"; cutting length: 26mm / 1.02"; shank diameter: 12mm / 0.47"; total length: 83mm / 3.27"; end cut type: square end; flute design: 2 flutes
- Wide Applications --- The end mill is suitable for creating flat-bottomed slots, pockets, or profiles. Used for machining aluminum, aluminum alloy, copper, plastic, and wood. Used with CNC milling machines, router machines, and engraving machines.
- Ease of Use --- Sharp square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during machining.
- HSS-AL --- High-speed steel tool has toughness, good wear resistance, heat resistance, and can withstand high cutting speeds. Aluminum coating on high-speed steel end mills provides additional lubricity and heat resistance, reducing friction. It helps improve chip evacuation and extends tool life.
- Useful Tips --- Make sure it is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. Excessive heat can affect tool life and performance.
- See more on Amazon...
Brand: CoCud | Manufacturer: CoCud
See On Amazon #19
YG-1 - 19109 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 6.25" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CXWZK | Model: 19109 | PartNumber: 19109 | Ean: 0733438191094 | UPC: 733438191094
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 38.00 x 38.00 x 14.50 Inches
See On Amazon #20
5 pcs M42 Cobalt End Mills, Square Nose, AlCrN Coated, 1/2" Mill Diameter, 1" Length of Cut, 3" Overall Length, 2 Flute, Center Cutting
Asin: B0BNJK96N2
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Robust Alcrn Coated Finish Enhances Resistances To Heat And Oxidation; Up To 10X Longer Service Life.
General Purpose End Mill That Creates Square Corners; Used For Both Roughing And Finishing Applications.
Features
- 1/2" Cut Diameter; 1" Length of Cut; 3" Overall Length; 1/2" Shank Diameter; 2 Flute; 35 Helix Angle
- General purpose end mill that creates square corners; Used for both roughing and finishing applications
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Robust AlCrN Coated finish enhances resistances to heat and oxidation; Up to 10x longer service life
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon
Looking For Something Else?
Search